安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Coming Soon: Studio Equipment

ホーム  Coming Soon  

Studio Equipment

Options
150/63(ページ1/2)の商品
1  2  »
FORTHCOMING
Intellijel LPG 1U Passive Low Pass Gate Module
Cat: 782952 Rel: 30 Sep 20
 
Low pass gate module
Notes: Drop this module (or a few of them) into your 1U row, patch in some sound sources, and then ping them with gates and CV to get some instantly pleasing results. So simple and fun!

Natural dynamics with the magic of vactrols.

In general, low pass gates (LPGs) control the amplitude and timbre of a signal by opening and closing a low pass filter. When the gate is closed, no frequencies are allowed to pass through (and no output is heard). As the gate begins to open, the lowest frequencies pass through to the output. As the gate opens further, the output grows louder and its high frequency content increases.

Traditional Low Pass Gates use vactrols to control the opening and closing of the filter. Encased within a vactrol is both a light source and a light detector. Applying a control voltage to the vactrol lights its internal LED i the brightness of which is measured by its detector. What makes vactrols particularly unique (and well-suited to musical applications) is their non-linear response to voltage - in particular, the way in which the internal LED slowly dims (rather than shutting off instantly) when the control voltage is removed. This sonic coupling of timbre and volume, along with the circuit's natural decay, makes the low pass gate particularly adept at producing tones associated with struck objects, like hand drums or marimbas. Indeed, low pass gates are the main ingredient of the so-called Buchla Bongo sound.

The Intellijel Passive Low Pass Gate 1U is a simple, vactrol based, 1-pole, passive low pass gate, which is controlled by an external CV input. Without positive control voltage, the gate is completely closed and none of the LPG's input signal is passed through to the output. Increasing amounts of positive CV open the gate i making the output signal both louder and brighter. At +5V, the gate is fully open and the input signal is passed through to the output.
This makes LPGs sound very different (and more acoustic) than the traditional complement of envelopes, VCFs and VCAs that are employed in most subtractive synthesizers. Exciting the vactrol (via the CV input) with a trigger, noise blast, or short envelope will result in a very natural sounding filtered envelope that's reminiscent of the sonic characterics of struck objects, which are allowed to decay naturally.

In addition, because this is a passive circuit (no power is applied to it), its sonic characteristics are somewhat dependent upon the audio signal you feed into it, making it a very natural and organic way to shape a signal's volume and tone.

Pairs very well with the intellijel Shifty module to derive polyphony out of a only a few HP of modules.

Width: 6HP
Depth: 19mm
Read more
MRP:$49.66 SAVE 17%
coming soon $41.37
FORTHCOMING
Behringer 994 Multiples Module
Cat: 772832
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $34.84
FORTHCOMING
Tangible Waves AE Modular FMOS FM Synthesis Module
Cat: 786477 Rel: 31 Oct 20
 
Synthesis module
Notes: FM synthesis for the AE!

The FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.58 SAVE 17%
coming soon $44.64
FORTHCOMING
Intellijel XY I/O 1U Module
Cat: 785358 Rel: 21 Oct 20
 
Conncector for Intellijel products
Notes: Use this module to tap into the 3-pin LINK connector used in several Intellijel products, including Mixup, Pedal I/O and the Palette and 2nd Generation Audio Jacks Board in a 7U case.

The XY I/O uses two 3.5mm TRS jacks, which accept insert cables to provide send/return capability to a pair of Pedal I/O's, or additional stereo inputs (or outputs) to a pair of Mixups, or one of each.

A third 3-pin Link connector on the back panel allows the X and Y jacks to access the L/R (or Send/Return) jacks on a single connected module or case without needing a stereo cable.
Read more
MRP:$27.44 SAVE 17%
coming soon $22.86
FORTHCOMING
Teenage Engineering OP-Z Grip Knob Kit
Cat: 784902 Rel: 16 Oct 20
 
Knob kit
Notes: Additional grip knobs for the OP-Z
Read more
MRP:$32.67 SAVE 17%
coming soon $27.22
FORTHCOMING
Behringer CB100 Condenser Gooseneck Microphone
Cat: 772994
 
condenser gooseneck microphone
Notes: CB 100 is a very directional microphone, best at isolating from other nearby instruments on stage. You chose the right mic for your instrument to ensure the greatest sound which blocks out the bleed from other sound sources.

The placement of the mics can make a huge difference on the character of the sound you create. You have chosen the right instrument mic with flexible and stable gooseneck, now all you need do is to place the mic in the sweet spot for the best harmonics and enjoy the music you make.

CB 100 is the most versatile microphone which allows you to mic up every instrument- you won't ever need another microphone for miking up.
Read more
coming soon $39.19
FORTHCOMING
Tangerine Dream Solace Package (limited edition)
Cat: 777107
 
facemask bundle package
Notes: Content: 2 face masks, 1 high-quality poster of the Barbican TD Exhibition, 1 fridge magnet showing Edgar Froese.

Material: Cotton satin, breathable, hand-made, with elastic earloops, washable at 60 degrees Celsius.
Read more
coming soon $27.57
FORTHCOMING
SynthRotek Passive Mult Module (black faceplate) (fully assembled)
Cat: 778295
 
passive multiplier module
Notes: The Synthrotek Passive Mult is the module that keeps on giving! Use this as either a 2x 1-to-3 passive multiplier or one 1-to-6 passive multiplier. Input one cascades to all 6 output jacks, or can be interrupted by plugging a cable into input two.

What is a passive mult? It is an ideal way of multiplying non-precise voltages in your Eurorack system. (Buffered multiples like the MST '07 Buff Mult are needed to maintain exact outputs of input voltages). Multiply any control voltage or audio sources across your system with ease in a very small and well priced package.

Available as an assembled unit, kit or PCB/panel combo. With such a small part count, this is a great module for first-time DIYers!

Specifications:
Width: 2HP
Depth: 14mm
Current draw: n/a
Read more
MRP:$23.52 SAVE 13%
coming soon $20.43
FORTHCOMING
Eurorack Hardware Modules E-OR Selectable Gate Mixer Module (black faceplate) (fully assembled)
Notes: The E-OR is a passive 2HP 'selectable gate mixer,' which means that you can choose between two different gate sources, two trigger sources or BOTH using the three way switch per channel. Great for choosing between various rhythms, clocks, gates, etc. Perfect for manual fills and variation in your set! Matte black panel with white ink. The E-OR is diode protected, so combining two trigger or gate sources is what it is meant to do!
Read more
MRP:$44.43 SAVE 17%
coming soon $37.02
FORTHCOMING
Behringer B906 Dynamic Microphone
Behringer B906 Dynamic Microphone (instrument microphone)
Cat: 772981
 
dynamic microphone
Notes: A super cardioid dynamic mic that's custom designed for great instrument reproduction! The B 906 instrument microphone is especially tailored for guitar amps, and is also excellent for percussion, horns and vocals.

The B 906 features a switchable presence filter which allows you to tailor the sound characteristics to different sound requirements and styles. The filter is adjusted via a slide switch on the microphone with different positions to boosts the presence for aggressive metal rhythm guitars or for classic rock and smooth jazz and blues sounds.

You can hang the B 906 on a guitar amp for stand-free performance. Its laterally mounted capsule has been specially developed for miking guitar amps face on and extremely close to the signal source. Due to its flat design, the B 906 is also very suitable for use with drums, since it can easily be positioned in cramped space conditions. The super cardioid pattern is great for reducing bleed in tight situations onstage, and the B 906's hum compensating coil rejects interference.
Read more
coming soon $41.37
FORTHCOMING
SynthRotek MIX Mixer Module (black faceplate) (fully assembled)
Notes: This simple passive mixer is suitable for mixing both audio and control voltage sources. Three channel inputs mix down to one output.

It is not suitable for additive voltage applications. All the jacks are switched to ground to minimize external interference when not patched. This can lead to unwanted attenuation of the output signal unless you plug a dummy cable into the unused channel(s) or, even easier, you can turn the channel's pot completely CCW.

Specifications:
Width: 2HP
Power consumption: none
Module screws included
Read more
MRP:$31.36 SAVE 14%
coming soon $26.96
FORTHCOMING
Eurorack Hardware Modules ATT 2HP Triple Attenuator Eurorack Module (black faceplate) (fully assembled)
Notes: Get the most signal attenuation in the smallest 3U package possible! The ATT module features three independent IN - Attenuate - OUT circuits in one 2HP module. Works great for attenuating both audio and CV signals. Completely passive, so no current draw on your power supply.
Read more
MRP:$44.43 SAVE 17%
coming soon $37.02
FORTHCOMING
Eurorack Hardware Modules OR Dual Eurorack Combiner Module (black faceplate) (fully assembled)
Notes: The OR is a passive dual OR Combiner module in 2HP for Eurorack. Two channels of three inputs to one output. Matte black panel with white graphics. Perfect for adding gates or trigger signals together as each input is diode protected. Passive, no current draw.
Read more
MRP:$37.90 SAVE 17%
coming soon $31.57
FORTHCOMING
Sensel Music Production Overlay For Morph MIDI Controller
Cat: 785462 Rel: 22 Oct 20
 
Overlay
Notes: Tune up your electronic music chops with Sensel's customizable MIDI control surface. The 16 pads, bass synth keyboard, and slew of knobs and sliders equip you with all you need for your next hit. Pitch bend and after-pressure make this an essential tool for beats and sound design.
The MIDI protocol is USB Class-compliant and has MIDI Polyphonic Expression (MPE) and Bluetooth MIDI
*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with Music Production Overlay or the Music Maker's Bundle.

Music Software Compatibility
The Morph is compatible with any music software that listens to MIDI controls.
Free licenses for Arturia - Analog Lab Lite and Bitwig Studio 8-Track are included free with the Morph.
Our user guide includes instructions for:
Ableton Live
Apple GarageBand
Apple Logic
Bitwig Studio
Cycling '74 Max
Image-Line FL Studio
Presonus Studio One 2
Propellerhead Reason

The Morph is also compatible with these iOS Apps:
Apple GarageBand
SunVox
FunkBox Drum Machine
Steinberg Cubase, Avid ProTools, MOTU Digital Performer, Cakewalk SONAR, Cockos Reaper, Renoise, Traktion, etc. will also listen to The Morph, along with any music software that listens to MIDI controls.
Read more
MRP:$44.43 SAVE 17%
coming soon $37.02
FORTHCOMING
Sensel Travel Case For Morph MIDI Controller (blue)
Cat: 785475 Rel: 22 Oct 20
 
Travel case
Notes: Stay organized and mobile while protecting your gear.

The Morph travel case is a convenient way to carry and protect your Morph, overlays, cables, iPad, paintbrushes and any other accessories that you use along with your Morph. Fits a Morph, iPad and 5+ overlays with ease.

Contains:
A padded exterior to protect your Morph from bumps and bruises
An interior sleeve to securely hold your Morph (and iPad)
Interior straps to hold cables, paintbrushes, drumsticks
An external zippered pocket for additional storage.

Specs:
Weight: 0.7 lbs | 319 g
Dimensions: 11 x 8 x 1.4 in | 28 x 20 x 3.4 cm
Read more
MRP:$31.36 SAVE 17%
coming soon $26.12
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (yellow)
Cat: 784918 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.06 SAVE 17%
coming soon $25.05
FORTHCOMING
Rode DC-USB1 Power Cable For Rodecaster Pro Podcast Production Console
Cat: 781267 Rel: 19 Sep 20
 
Power cable
Notes: The DC-USB1 is a power cable that allows the RODECaster Pro to be powered from any compatible USB output, making it entirely portable. It features a locking connector for added security. A high-power (2.4A minimum) USB output is required for operation.

*USB device/power bank not included.

Power Requirements:
5V/2.4A (USB)

12V/1A (DC)
Read more
MRP:$32.67 SAVE 17%
coming soon $27.22
FORTHCOMING
Tangible Waves AE Modular 2-Row 12x2 Narrow Case
Cat: 786519 Rel: 31 Oct 20
MRP:$41.82 SAVE 17%
coming soon $34.84
FORTHCOMING
Tangible Waves AE Modular 4BUFFER Buffered & Switchable Multiples Module
Cat: 786473 Rel: 31 Oct 20
 
Buffered & switchable multiples module
Notes: Buffered, switchable multiples for precise CV signals

The 4BUFFER module is a buffered multiple of 1 in to 2 out, with the option to chain the channels together to create a total of 8 outputs for one input or other combinations. Buffered multiples have the advantage over the normal passive mults in that there are no voltage drops across the signal path. As the AE system matures into more precision regarding oscillator tracking etc. this is a helpful utility for various situations.

Module power consumption: 1 mA
Read more
MRP:$27.44 SAVE 17%
coming soon $22.86
FORTHCOMING
Tangible Waves AE Modular OR2x4 CV Generation & Manipulation Module
Cat: 786483 Rel: 31 Oct 20
 
CV generation & manipulation module
Notes: The OR2x4 module combines 2x4 inputs by logical OR rule; the input signals are usually trigger/gate signals and are treated as digital signals.

This can be used either for "mixing" gate/trigger signals from different sources or for audio signals. too.

There are two independent units with four inputs each. With a switch all eight inputs can be linked to an 8-input OR.

With the GATE inputs the signal can be controlled further; if GATE gets a "low" signal then the output is low also. By this, the output can be synced to a common clock signal and even if one of the inputs remains high the output changes. If the GATE input remains open, the module operates as a regular OR gate.
Read more
MRP:$31.36 SAVE 17%
coming soon $26.12
FORTHCOMING
Tangible Waves AE Modular POLAMIX 3 Channel Attenuverter & Mixer Module
Cat: 786486 Rel: 31 Oct 20
 
Attenuverter/mixer module
Notes: POLAMIX - a 3-channel atenuverter/mixer

The POLAMIX is similar to the 2CVTOOL in that you can offset and -/+ attenuate CV signals, but it also acts as a 3 channel mixer. Try to use this with 3 LFOs for modulation mayhem!

The three inputs are routed to corresponding knobs, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.G. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. And this for each of the three inputs. Finally, with the offset knob, the total level can be shifted up or down.

Read more
MRP:$40.51 SAVE 17%
coming soon $33.65
FORTHCOMING
Tangible Waves AE Modular MS20 FILTER Module
Cat: 786479 Rel: 31 Oct 20
 
Filter module
Notes: The famous MS 20 filter for AE modular!

This adaptation of the filter used first in Korg's MS-20 synth for AE modular offers control knobs for cutoff frequency, resonance and CV attenuator. Two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter this filter has a significant self resonance and also a very quick response to changes in the cutoff frequency.

The filter type is switchable between lowpass and highpass (LP/HP switch).
Read more
MRP:$47.04 SAVE 17%
coming soon $39.19
FORTHCOMING
Tangible Waves AE Modular SAWVOX Synthvoice Module
Cat: 786493 Rel: 31 Oct 20
 
Synthvoice module
Notes: A complete basic synthvoice in nasty 8-bit!

The SAWVOX module is a complete synth voice with two sawtooth oscillators, a filter and a VCA, all realized digitally with a tiny 8-bit microcontroller. The oscillators are detuned by a fixed rate to get a fatter sound, and can be switched to a single oscillator. Of course, due to the limited resources of the processor, the sound has the typical 8-bit lofi char, but the CV tracking is quite fine, and it can find its place in a lot of patches. All parameters can be CV controlled, eg. filter frequency and resonance.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.58 SAVE 17%
coming soon $44.64
FORTHCOMING
Tangible Waves AE Modular SLEW/EDGE CV Slew Limiter & Edge Detector Module
Cat: 786504 Rel: 31 Oct 20
 
VC slew limiter & edge detector module
Notes: A slew limiter / edge detector for CV's.

The SLEW/EDGE module has two purposes:

First, it is a slew limiter, changes in the incoming CV are softened with a variable slew time. If the CV is used e.g. for controlling an oscillator, you get a portamento. With two switches it can be controlled if only rising or falling CVs or CV change in both directions are processed with the slew time. Additionally, the choice if rising and/or falling CVs are "slewed" can be controlled with external gate signals.

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The SLEW/EDGE module combines the function of a slew limiter for CVs and a CV change detector in one module. The slew operation can be activated individually for rising and/or falling CVs, either by switches or controlled by external gate signals. The edge detection generates various gate / trigger output signals depending on rising or falling of the input CV.

Module power consumption: 5 mA

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The Slew detector can be useful if using the S&H module for modulation; rather than jumps it will smooth the changes between the different levels, particularly good on filter modulation, unless you want the sudden changes.
Read more
MRP:$37.90 SAVE 17%
coming soon $31.57
FORTHCOMING
Tangible Waves AE Modular 1-Row 16x1 Standard Case
Cat: 786523 Rel: 31 Oct 20
MRP:$36.59 SAVE 17%
coming soon $30.49
FORTHCOMING
TC Helicon Go Guitar Portable Guitar Interface For Mobile Devices
Cat: 781363
 
Portable guitar interface
Notes: The amazing GO GUITAR is the only mobile interface you'll need to record quick, on-the-go riffs anywhere, anytime with your iOS, Android, Mac or PC mobile device. Just want to practice without the hassle of hauling around amps or blowing your roof off? Simply plug your electric or bass guitar into GO GUITAR along with your favorite pair of headphones. Jam or record literally anywhere you can fit yourself and your guitar.

Whether you're in your kitchen, relaxing in the park, or on the tour bus, GO GUITAR lets you create whenever and wherever the mood strikes. All you need is this simple guitar interface, a mobile device, and of course, your guitar!

Want to add some effects to your guitar or record the riffs you've been working on? GO GUITAR integrates seamlessly with the creative suite of TC Helicon mobile apps. When it comes to sparking your creativity, TC Helicon has you covered with an extensive array of mobile applications designed specifically for your GO GUITAR device, including effects, processing and much more - plus they are all free to download from your app store! And if that's not enough, GO GUITAR is also compatible with a wide range of apps and software from 3rd-party vendors.

Whether you want to jam in silence, or provoke noise-induced rage into your neighbors, GO GUITAR has you covered. Just connect some headphones to your GO GUITAR and hear yourself as you record or play with crystal clarity.

Yes, the word "Guitar" is in the name, but that's not GO GUITAR's only game! You can also use the line-in for your keyboard, mixer, or any other line-level audio device. GO GUITAR records high-quality recordings.

Once you've solidified that hit-making hook, feel confident that you can capture high quality audio directly to your iOS, Android, Mac, or PC device using your favorite recording DAW. GO GUITAR ensures a broad dynamic range for a distortion-free audio signal so you can rest assured that the recording you create will compete with the rest of the world.

For those times when you're crammed into an awkward space with nowhere to put your GO GUITAR, you can use the integrated clip and easily strap it onto your belt or guitar strap.



Read more
coming soon $25.86
FORTHCOMING
EMW Patch 2 Module (black faceplate)
Cat: 775801
 
patch module
Notes: 6 HP patch (multiples) module with 4 independent groups, two with 4 connections each and two with 5 connections each.

Eurorack (3U) form factor - 6HP width
Power consumption: +12V [0mA] / -12V [0mA]
Weight: 48g
Depth: 22mm
Read more
MRP:$47.04 SAVE 17%
coming soon $39.20
FORTHCOMING
EMW Adaptors 101 Module (black faceplate)
Cat: 775806
 
adaptor module
Notes: A simple passive adaptor with 2 x mono to stereo or stereo to L-R mono, dual P2 to RAC and dual P2 to P-10.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [0mA] / -12V [0mA]
Weight: 48g
Depth: 35mm
Read more
MRP:$48.35 SAVE 17%
coming soon $40.29
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (grey)
Cat: 784919 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.06 SAVE 17%
coming soon $25.05
FORTHCOMING
Teenage Engineering CA-X Universal Silicone Case For Pocket Operators (burgundy)
Cat: 784915 Rel: 16 Oct 20
 
Silicone case
Notes: Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons.
Read more
MRP:$30.06 SAVE 17%
coming soon $25.05
FORTHCOMING
Tangible Waves AE Modular 1-Row 12x1 Narrow Case
Cat: 786529 Rel: 31 Oct 20
 
1-row 12x1 narrow case
Notes: This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 16 modules) ).

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
Read more
MRP:$32.67 SAVE 17%
coming soon $27.22
FORTHCOMING
Tangible Waves AE Modular 2CVTOOL CV Dual Attenuverter Module
Cat: 786470 Rel: 31 Oct 20
 
Dual attenuverter module
Notes: A dual attenuverter for CVs.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for shaping and tuning all kinds of modulation signals.

The inputs goes to the level knob, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.g. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. With the offset knob, the total level can be shifted up or down, with the clipping at the upper and lower ends an additional modfication of the signal is possible.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for all kinds of modulation purposes.

Module power consumption: 2 mA

Inputs
IN 1 - accept any CV or audio signal
IN 2 - accept any CV or audio signal
Outputs
Bus CV - CV signal from MIDI
Bus CTRL - CTRL signal from MIDI
OUT 1 (x2) - attenuated signal from IN1
OUT 2 (x2) - attenuated signal from IN2
MULT - passive multiple, not connected to the module's circuitry
Controls
OFFSET 1 - Potentiometer to dial in the offset voltage for channel 1. This will be added to the incoming CV.
LEVEL 1 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
OFFSET 2 - Potentiometer to dial in the offset voltage for channel 2. This will be added to the incoming CV.
LEVEL 2 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
Read more
MRP:$40.51 SAVE 17%
coming soon $33.75
FORTHCOMING
Tangible Waves AE Modular 1-Row 20x1 Wide Case
Cat: 786525 Rel: 31 Oct 20
MRP:$43.12 SAVE 17%
coming soon $35.92
FORTHCOMING
Tangible Waves AE Modular 2-Row 16x2 Standard Case
Cat: 786514 Rel: 31 Oct 20
 
2-row 16x2 wide case
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 32 modules) or module mounting (up to 16 modules) )

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$49.66 SAVE 17%
coming soon $41.37
FORTHCOMING
Tangible Waves AE Modular 2-Row 20x2 Wide Case
Cat: 786515 Rel: 31 Oct 20
 
2-row 20x2 wide case
Notes: The 2-row rack for AE modular is 20 units wide with 2 rows; the MASTER module consumes 2 units so you have 38U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 32 modules) or module mounting (up to 16 modules) )

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 51.5 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$57.50 SAVE 17%
coming soon $47.91
FORTHCOMING
Nux NMP-2 Dual Foot Controller
NUX
Cat: 784822 Rel: 15 Oct 20
 
Dual foot controller
Notes: Dual foot switch controller for on-the-fly control of guitar effects and amplifiers. Dual mono or stereo jack compatible with individual latching/momentary options for each switch. Designed for use with NuX pedals and compatible with many other types of equipment.

LED indicator per pedal
Latching or non-latching selectable
Compatible with NUX Loop Core Deluxe, JTC Drum & Loop PRO and Cerberus

The box for this item contains :

NuX NMP-2 dual foot controller

Power supply: 9Vdc (5.5 x 2.1mm, centre-negative) optional for LEDs
Dimensions: 96 x 50 x 46mm
Weight: 200g
Read more
MRP:$45.74 SAVE 31%
coming soon $31.57
FORTHCOMING
Miditech Guitarface II USB Audio Interface With Steinberg Cubase LE8
Cat: 784453 Rel: 10 Oct 20
 
USB audio interface
Notes: High-speed for guitarists! This small, black Aluminium USB audio-interface is a really cool tool for guitar and microphone recordings! In any case, with it's fast ASIO driver the GUITARFACE II USB is fast enough for speed-metal!

Works driverless with Mac OS/X, Apple iOS 4.2, Windows XP SP2, Windows Vista, Windows 7, 8 and 10

ASIO driver for Windows XP 32/64 Bit, Windows Vista 32/64 Bit and Windows 7/8/10 32/64 Bit available!

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Mix 2 lite, Magix Samplitude Pro X2 Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS, Magix Independence free, Waldorf Edition LE and Imagelines Poizone Synthesizer
Read more
MRP:$79.71 SAVE 39%
coming soon $48.99
FORTHCOMING
Miditech Audiolink Light USB Audio Interface
Cat: 784449 Rel: 10 Oct 20
 
USB audio interface
Notes: Compact USB Audio-Interface for all cases: With one build-in Microphone-Preamp with phantom power and a complete 16 Bit/48 kHz Stereo Instrument/Line Interface.

This class compliant USB Audio Interface is very easy to use. It is made for playing mp3 and film streaming with your PC and iPad- you will love the very good sound quality with less noises during playback!

Fully USB powered, with fast Windows ASIO drivers and high performance headphone output the Audiolink light gives you all the recording and playback possibilities you will ever need.

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Mix 2 lite, Magix Samplitude Pro X2 Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS, Magix Independence free, Waldorf Edition LE and Imagelines Poizone Synthesizer
Read more
MRP:$79.71 SAVE 43%
coming soon $45.74
FORTHCOMING
Miditech Midiface 2x2 USB MIDI Interface
Cat: 784393 Rel: 10 Oct 20
MRP:$57.50 SAVE 17%
coming soon $47.91
FORTHCOMING
Joue Fire Drum Pad For Board Play Modular MIDI Controller (yellow, orange)
MRP:$45.74 SAVE 17%
coming soon $38.11
FORTHCOMING
Joue Water Guitar Pad For Board Play Modular MIDI Controller (blue, green)
Cat: 781799 Rel: 31 Oct 20
 
Pad for Play MIDI controller
Notes: 6-string guitar neck on 8 frets, water color scheme.
Read more
MRP:$45.74 SAVE 17%
coming soon $38.11
FORTHCOMING
Joue Water Keys Pad For Board Play Modular MIDI Controller (blue, green)
Cat: 781801 Rel: 31 Oct 20
 
Pad for Play MIDI controller
Notes: 17 keyboard keys, water color scheme
Read more
MRP:$45.74 SAVE 17%
coming soon $38.11
FORTHCOMING
EMW Patch 1 Module (black faceplate)
Cat: 775800
 
patch module
Notes: 4 HP patch (multiples) module with 3 independent groups of 3 connections each.

Eurorack (3U) form factor - 4 HP width
Power consumption: +12V [0mA] / -12V [0mA]
Weight: 23g
Depth: 22mm
Read more
MRP:$30.06 SAVE 17%
coming soon $25.05
FORTHCOMING
EMW Patch 3 Module (black faceplate)
Cat: 775802
 
patch module
Notes: Patch (multiples) with two groups of 1-4 or 4-1 connections with on/off control switches in 3 of the connectors.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [0 mA] / -12V [0 mA]
Weight: 65g
Read more
MRP:$54.89 SAVE 17%
coming soon $45.74
FORTHCOMING
EMW Linear Attenuators Module (black faceplate)
Cat: 775772
 
attentuators module
Notes: The EMW Linear Attenuators module is great for controlling the level of audio signals and control voltages. Signals patches into IN1 or IN2 will suffer an attenuation that can be adjusted from zero to infinity. An extra 4-patch connections is also present to expand the module's usability.

Eurorack (3U) form factor - 6 HP width
Dual adjustable DC-Audio attenuation controllers
Attenuation range: zero to infinity
Additional 4 patch connections
Power consumption: +12V [0mA] / -12V [0mA]
Connectors: 3.5mm
Weight: 46g
Depth: 22mm
Read more
MRP:$57.50 SAVE 19%
coming soon $46.82
FORTHCOMING
Joue Fire Piano Pad For Board Play Modular MIDI Contorller (yellow, orange)
MRP:$45.74 SAVE 17%
coming soon $38.11
FORTHCOMING
Joue Fire Keys Pad For Board Play Modular MIDI Controller (yellow, orange)
MRP:$45.74 SAVE 17%
coming soon $38.11
FORTHCOMING
Joue Water Drum Pad For Board Play Modular MIDI Contoller (blue, green)
Cat: 781796 Rel: 31 Oct 20
 
Drum pad
Notes: Drum pads, Water colour scheme.
Read more
MRP:$45.74 SAVE 17%
coming soon $38.11
FORTHCOMING
EMW Switch Interface 1 Module (black faceplate)
Cat: 775784
 
triple switch controller module
Notes: The EMW Switch Interface is an auxiliary module that has three stationary switches that can be used to connect an input-output jack pair or to route one input signal to one jack (left) or another jack (right). Its great for manually controlling signals in your patches.

Read more
MRP:$54.89 SAVE 17%
coming soon $45.74
FORTHCOMING
Sensel Dvorak Tactile Keyboard Overlay For Morph MIDI Controller
Cat: 785472 Rel: 22 Oct 20
 
Overlay
Notes: Turn the Morph into a wireless keyboard with one of our 3 keyboard overlays. Boost your mobile productivity with tactile key action, function keys, media controls, and customizable shortcuts. Use the SenselApp to adjust for Windows and Mac layouts, so your muscle memory stays intact!

Features:
Soft and quiet, with mechanical feedback - feels fantastic to type on
Wireless Bluetooth connectivity with PC, Mac, iOS (iPhones, iPads) and Android
Hotkeys for PC/Mac
Trackpad below space bar

Specs:
Weight: 0.4 lbs | 182 g
Dimensions: 9.5 x 5.5 x 0.3 in | 24 x 14 x 0.8 cm

*This overlay is designed to be used with the Sensel Morph. So if you don't already own a Morph, pick up the Morph with QWERTY, Morph with AZERTY, or Morph with DVORAK.
Read more
MRP:$44.43 SAVE 17%
coming soon $37.02
150/63(ページ1/2)の商品
1  2  »

Filter

Coming Soon: Studio Equipment
Close