Turntable Styluses | Hifi Styluses

Notes: ATN95E Replacement stylus for AT95E cartridge - Compatible with AT93 cartridge and Compatible with AT95 cartridge

Replacement stylus for AT95E cartridgeThe ATN95E is also compatible with discontinued models AT93 and AT95.

Notes: Replacement JNP110 stylus with elliptical stylus and aluminium alloy cantilever.

Fits MP110 cartridge.

Notes: Goldring D42 stylus is designed to fit the current Goldring 1042 phono cartridge or old model 1040, a direct replacement when your stylus is worn - saving the cost of buying a whole new cartridge. Goldring cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Simply remove your current stylus by carefully pulling it away from the cartridge and replace it with the replacement.

The 1042 is a record cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The extended groove contact of its Gyger-S diamond gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.

Replacement stylus: 1042 - D42

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: Replacement stylus for AT91 cartridge.

The ATN91 is also compatible stylus for CN5625AL and AT90 discontinued cartridges.

The ATN91 is also upgrade replacement styli for AT3600L.

The tracking force of AT3600L equipped with ATN91 is 2g, do not upgrade from ATN3600L to ATN91 when your tonearm does not allowed tracking force adjustment.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: Goldring D12GX stylus is designed to fit the current Goldring 1012GX phono cartridge or old model 1010 or 1012, a direct replacement when your stylus is worn - saving the cost of buying a whole new cartridge. Goldring cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Simply remove your current stylus by carefully pulling it away from the cartridge and replace it with the replacement.

The Goldring 1012GX record cartridge uses the acclaimed Gyger-2 diamond stylus. This is a fine-line type which gives smooth extended high frequencies, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability and reduces record wear. The 1012GX represents outstanding value for money and has become one of Goldring's most popular cartridges.

Replacement stylus: 1012GX - D12GX

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: Goldring D06 stylus is designed to fit the current Goldring 1006 phono cartridge, a direct replacement when your stylus is worn - saving the cost of buying a whole new cartridge. Goldring cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Notes: AT-VMN95E VM95 series Elliptical replacement stylus - Aluminium Cantilever, Elliptical stylus and Bonded Round Shank

AT-VMN95E
VM95 series Elliptical replacement stylus
Aluminium cantilever
Elliptical stylus
Bonded Round Shank
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

This VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C
AT-VMN95E
AT-VMN95EN
AT-VMN95ML
AT-VMN95SH
AT-VMN95SP

Elliptical Bonded Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: ATN95EX Replacement stylus for AT95EX. Elliptical diamond stylus with Bonded Round Shank, Replacement stylus for AT95EX in red.

0.3 x 0.7 Diamond Elliptical Replacement Stylus with Bonded Round Shank Replacement stylus for these cartridges: AT95EX

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: 'Nude' super-elliptical stylus of just 7.6 x 18 microns (0.3 x 0.7 mil), cut and polished from a single homogeneous piece of diamond. This makes for a lower effective tip mass of improved rigidity, which in turn means its ability to retrieve high-frequency detail is dramatically improved when compared to the 'bonded' elliptical stylus alternative. It's far less likely to 'mis-track' or overshoot when tracing high-frequency groove modulations, and because of its finely polished 7.6-micron profile it can more effectively fit into closely packed inner grooves. Lowerdistortion, improved transient response and a flat frequency response all contribute to superior fidelity when compared to any price-comparable alternative.

Technical specifications

Frequency Range 20 Hz - 20 kHz
Channel Balance < 1.5 dB @ 1 kHz
Channel Separation > 20 dB @ 1 kHz
Sensitivity 3.5 mV (1 kHz @ 5 cm/s)
Static Compliance 20 mm/N
Vertical Tracking Angle 20-
Stylus Radius 7.6 micron (0.3 x 0.7 mil)
Stylus Type Nude eliptical
Load Resistance 47 kO
Load Capacitance 100- 200 pF
Internal Inductance 400 mH
Internal Resistance 410 O
Cartridge Mass 6.9 g
Fixing Centre 12.7 mm (0.5 in)
Playing Weight 1.5 - 2.5 g (1.75 g recommended)

Notes: Replacement stylus for Audio-Technica’s AT91R cartridge. Incorporates a bonded conical stylus tip and an aluminium alloy tube cantilever for the pick-up of subtle details.

0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Beige
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg): 0.013

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.03
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.03

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan

Colour: Blue
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.03
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.03

Notes: Good quality replacement stylus for the classic Pickering V-15 cartridge, as found on a number of hi-fi turntables. Simply slide out your worn stylus and push in the new one.

Supplier's notes:
Replacement Styli for 31-2A D1507, Red (Pickering) Conical Tip

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Red
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: White
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.013
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg): 0.013

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.03
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg) : 0.03

Notes: Replacement stylus Nagaoka MP-150

JN-P150, Tonar article 6823

Cantilever: hardened tapered aluminum alloy

Stylus: 0.4 x 0.7

Mil naked elliptical block diamond stylus tip

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Grey
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.03
Packaged dimensions (HxWxL mm): 20x50x20
Transport dimensions (mm): 50x20x20
Gross Weight (Packaged) (kg): 0.03

Notes: Replacement 3600 E flip stylus with elliptical tip and aluminium cantilever.

Notes: Replacement Styli for 36-35 DN-352 (Dual) I I Black Conical Tip

A popular replacement stylus. Individually packed in a plastic case. Made in Japan

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: Replacement 3474 EP stylus with elliptical tip and aluminium cantilever

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Notes: The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black3 and Green3?

Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Specifications:

Frequency Response: 10-55,000 Hz
Principal: MI
Channel Separation at 1KHz: 30
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 1.5
Stylus Type: E
Inductance: 45mH
Resistance: 475
Compliance CUs: 20
User replaceable stylus
Mounting: S/P
Weight: 5.5g

Notes: Replacement stylus for VM510CB & VM610MONO

VMN10CB Replacement stylus for VM510CB & VM610MONO. Conical Bonded stylus, Bonded Round Shank construction in blue

Features

Even the finest diamond stylus becomes worn after an extended period of play.The styli in our VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. Our renewed VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge, but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Notes: Replacement stylus for VM670SP

VMN70SP Replacement stylus for VM670SP. Conical (3mil) stylus, Nude Rectangular Shank construction in grey

Features

Even the finest diamond stylus becomes worn after an extended period of play.The styli in our VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. Our renewed VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge, but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Notes: Replacement 3600 C Flip stylus with conical tip and carbon cantilever

Notes: Replacement Styli for 22-155 (IDN-155 E) Black (Dual) I, Ellip Tip

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Black
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01

Notes: The Grado Prestige 78C Replacement Stylus is designed to fit the Grado Prestige 78C MM Phono Cartridge - a direct replacement when your stylus is worn, rather than replacing the whole cartridge. Grado cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Simply remove your current stylus by carefully pulling it away from the cartridge and replace it with the replacement.

Technical details

Frequency Response: 10-50
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec.: 5mV
Recommended Tracking Force: 2-5
Stylus Type: C
Inductance: 45mH
Resistance: 475
Stylus Replacement U=user: U
Mounting: S/P
Weight: 5.5g

Notes: Tonar 3600 H-Flip Replacement Stylus. The stylus features a special hyper elliptical diamond.

Notes: Grado Prestige ME+ Mono Phono Cartridge uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, elliptical diamond mounted in a brass bushing, made for analogue lovers with record collections that include mono albums.

Prestige Series

The Prestige series of cartridges are designed for high output and excellent stability under severe use. A considerable tip mass reduction results in a frequency response to 50 kHz and beyond and tracking forces from 1-2 grams. They are acclaimed by experts as virtually the finest pickups in the world at their price. All styli in the Prestige series are user replaceable.

Mono Cartridge

Grado strives to deliver products that will fit all the needs of the analogue enthusiast. To this end, Grado offers two new cartridge models in a mono version. The ME+, like the MC+, is mounted with an elliptical diamond.

Optimised Transmission Line

Prestige model ME+ uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, elliptical diamond mounted in a brass bushing. This provides an ideal transfer of the signal from point to point, stylus to cantilever to magnet to coils, etc achieved by eliminating resonance at each of these key junctions. The transmission line cantilever consists of separate sections that are telescoped into each other.

All sections are made of different alloys, some sections hollow, other sections solid. These sections are bonded together with materials that act as dampers and are coated with a black proprietary material which controls and absorbs resonances that travel on the surface of the cantilever. The OTL stylus/cantilever design will make your records sound quieter, improve the height, width, and depth of the soundstage and offer more detail than previously obtainable.

Pivoted-Fixed Axial

This design feature is basically quite simple. The "OTL" cantilever shaft is brought to a fixed axial pivot that supports the entire cantilever assembly. A miniature element attached to the end of the cantilever is allowed to move freely within the lines of flux of a stationary magnet and coil structure.

This system of support is mechanically more accurate (more linear) than conventional "teeter-totter" designs that utilize an iron armature to balance the mass of the cantilever. The teeter-totter design is supported in the centre with a rubber doughnut mounting. The fixed axial design has a very low tip mass, which results in lower distortion, improved transient response, and longer record life.

Flux-Bridger Generator

The Flux-Bridger design uses four separate magnetic gaps that the miniature element of the cantilever bridges. The miniature element moves between opposing flux gaps creating an increase in flux in one gap while reducing it in the other. The four separate magnetic gaps create a highly efficient and perfectly balanced system. This design requires fewer coil turns than conventional designs.

100% Quality Control

The ME+ uses one of Grado's upgraded generating systems. All wooden body cartridges are available in mono version. Each individual cartridge manufactured by Grado is hand assembled and tested for frequency response, channel output, channel balance, phase linearity, inductance and resistance. This meticulous care in design and construction lavished on each Grado cartridge contributes to an unchallenged consistency of performance and guarantee of reliability.

Tech Specs

Freq Response: 10-50
Principal: Moving Iron
Input Load: 47K
Output 5cm/s: 5mV @1KHz
Recommend Track Force: 1.5
Stylus Type: Elliptical
Inductance: 45mH
Resistance: 475
Stylus Replacement: U
Mounting: S/P
-Weight: 5.5g

Notes: The Grado Prestige 78E is designed to be used with 78 records, a high output cartridge with excellent stability under even severe use, featuring modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, conical/spherical 3mm diamond mounted in a brass bushing. This cartridge can be used for either archival or casual play without concern for undue wear on the record.

Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world.

Tech Specs

Frequency Response: 10-50
Principal: MI
Input Load: 47K
Output at 1KHz 5CM/sec: 5mV
Recommended Tracking Force: 2-5g
Inductance: 45mH
Resistance: 475
Stylus: replaceable
Mounting: standard
Weight: 5.5g

Product features
Colour: black
Type of stylus: elliptical
Type of turntable component: needle

Notes: Replacement stylus for the Grado Prestige MC+ Mono cartridge.

Notes: Replacement Styli for 36-92F (N-92F) I Ellip Tip (Shure Type) Red

A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: Red
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01