Studio Power Supplies | DJ Power Conditioners

Notes: The Electro-Harmonix EHX9.6DC-200 is the player's choice of battery eliminator for many of the world's most popular effects pedals including EHX, Boss, MXR, Ibanez and others. It is a 9.6 Volt DC/200mA linearly regulated power supply with 2.1mm x 5.5mm center negative barrel plug.

Notes: This power adapter provides power to MIDI Solutions products in instances when it is not available or where a large number of items are being chained in series. It has an optically isolated MIDI In, MIDI Thru, and power connection for a 9V (AC or DC) wall adapter. It's possible to power up to 20 MIDI Solutions products from the power adapter's single Thru output. It can also be used in a transmitter/receiver configuration to send MIDI over long distances.

Notes: Mains Power Leads UK - IEC 10A

UK 3 pin plug to IEC C13 female plug 3 cores mains power lead, suitable for connecting power to general electronic equipment up to 2300W (10A).

Max. current: 10A
Max. power: 2300W

Notes: The Heart and SOL of Your Pedalboard

SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark. Featuring the same 660mA at 9V DC per outlet and four switchable voltages on each outlet as its bigger brother CIOKS DC7, SOL is the most powerful small form-factor power supply available today with a total of 30 watts of DC power available.

Specifcations

Mains input: 100-240V AC universal
Outlet 1-5:
9V DC / 660mA or
12V DC / 500mA or
15V DC / 400mA
or 18V DC / 330mA each
Total output power: max. 30W

What's in the box

9 Flex cables included:
3 x 1030 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 30cm (black)
2 x 1050 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 50cm (black)
1 x 2050 - Type 2 - 5,5/2,1mm DC plug, centre positive, L-shape, 50cm (red)
1 x 4050 - Type 4 - 5,5/2,5mm DC plug, centre positive, L-shape, 50cm (green)
1 x 1035 - Split Flex type 1 - 30 & 50cm (black)
1 x 1533 - 3-way daisy chain Flex type 1, 30+30+50cm (black) Included in the box
SOL power supply
AC mains power cord (region specific)
Mounting hardware for Pedaltrain and Templeaudio boards (two screws and one hex-key)
Product manual
Flex Guide
CIOKS sticker sheet

Notes: This mains charger has 2 USB sockets, each capable of producing 2100mA output. Ideal for charging tablet computers, smartphones, cameras and other devices.

- Blue LED power ON indicator
- Capable of charging two devices simultaneously

Notes: 9V myVolts PSU for use with myVolts 5-way power splitter cable for Korg Volca

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Power up to 5 Korg Volcas from one 9V power adaptor!

Compatible with the Volca Beats, Volca Bass, Volca Keys, Volca Sample, Volca FM and the new Volca Kick.

Option '5-way splitter PLUS PSU' includes MyVolts 9V power supply adaptor, suitable for powering up to 5 Volcas from a mains socket (choose from UK, EU or US plugs).

Option '5-way splitter PLUS USB' includes MyVolts 5V USB to 9V power converter cable, for powering up to 5 Volcas from any USB port - like the USB port in a laptop, a phone charger, or an inexpensive USB power bank!

Option '5-way splitter only' includes only the 5-way splitter, you'll need to supply your own 9V centre positive power adaptor, with 5.5mm outer diameter, 2.1mm inner diameter tip.

Main cable is 1 metre in length

Cable splits into 5 male plug connectors to fit the Volca, and each one is 0.7m in length

MyVolts-branded band keeps the cables tight

Female connector fits a 5.5mm OD and 2.1mm ID tip - it needs a power adaptor with 9V centre positive polarity.

Choose from 5 options:
5-way splitter + USB. Includes 5V to 9V USB converter cable, for powering up to 5 Volcas from any USB port - like the USB port in a laptop, iPhone charger, or an inexpensive USB power bank. Works anywhere in the world!
5-way splitter only
5-way splitter + 9V UK wall power adaptor
5-way splitter + 9V US wall power adaptor
5-way splitter + 9V EU wall power adaptor

Notes: Power supply unit designed for all SoMa Laboratory instruments.

Notes: ReVolt 2-battery kit lets you power any device that needs 2 x AAA batteries from a USB port instead.

Kit contains an AAA bridge cable that gives the device a DC power jack input, an AAA dummy battery and a 3V Ripcord USB cable. The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.

With ReVolt, you'll never need to put batteries into your device again. You can power it whichever way suits you - from a wall phone charger, a USB port on your laptop, a USB powerbank, a USB wall plug, or even from a USB solar cell.

Included in the 2-battery kit:

ReVolt AAA Bridge cable with AAA dummy battery
myVolts 3V Ripcord USB to DC power cable, centre
If you want to power a device that needs 2 x AA batteries, add to your order 2 x ReVolt AAA Dummy Battery

Not sure what you need to power your device? Drop us an email at help@myvolts.co.uk and we'll advise - we've 15 years' experience powering devices and we'd love to solve your power problem, big or small.

Why buy ReVolt?

Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed

Notes: This high-quality, low-noise power supply adaptor by myVolts has an output of 5V DC and 2A max. Tip: USB A Female.

It's suitable for any device that has a power requirement matching this specification.

If your device has a current requirement lower than 2A that's fine, only the current required by the device is drawn by the device.
So a device that needs, for example, 500mA (or 0.5A) current will be perfectly served by a 1000mA (or 1A) power adaptor.

Specification:

Input:
Input voltage: AC100-240V, 50/60Hz (for worldwide use)
Plug: UK Plug

Output:
Output Voltage: 5V DC
Output Current (Max): 2A


Cable and tip:
Cable length: 0 metres
Tip: USB A Female

Safety and certs:
CE certified: Yes
RoHS certified: Yes
Energy efficiency: Rated 'Energy Star level VI'

Notes: Revolt - 6 Battery Kit - USB Solution for AAA and AA Battery Devices kit lets you power any device that needs 2 x AAA batteries, or 2 x AA batteries, from a USB port instead.

Kit contains 3 x AAA bridge cables - each gives the device a DC power jack input, 3 x AAA dummy batteries, 6 x AAA to AA adaptors, 2 x Crazy Chain Mini cable and a 3V Ripcord USB cable.

The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.

Why buy ReVolt?

Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed
Included in the 6-battery kit:

3 x ReVolt AAA Bridge cable with smart battery
3 x AAA dummy battery: insert into battery compartment alongside the smart battery
3 x AAA to AA adaptors: for powering devices requiring AA batteries
myVolts 3V Ripcord USB to DC power cable: for powering 2-battery devices from a USB port
2 x Crazy Chain Mini cable: daisy-chain up to 4 battery devices, power all from one USB port

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Universal power supply for all Sonicware LIVEN devices:

9V - 2A - center plus polarity
EIAJ 3 connector (1.7×4.75×9.5mm)
incl. adapter set EU/US/UK/AU