安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Behringer

ホーム  Labels  

Behringer

Options
150/59(ページ1/2)の商品
1  2  »
FORTHCOMING
Behringer 112 Dual VCO Module
Cat: 780465
 
analog dual VCO module
Notes: Eurorack module; two identical analog VCOs in one module.

Selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators;

Power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm
Read more
coming soon $108.70
FORTHCOMING
Behringer 121 Dual VCF Module
Cat: 772865
 
dual VCF module
Notes: This is the Behringer SYSTEM 100 121 DUAL VCF Module. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case, at a very affordable price. Mix the 121 DUAL VCF in with your existing rig or start your modular synth journey from here.

The 121 DUAL VCF features 3 CV inputs and 3-channel mixers per VCF; allowing you to independently mix all input signals. All of these inputs have their own attenuators to provide you more control over each signal that goes into the module.

Each VCF has its own output accompanied by a resonance slider that boosts resonance frequencies and a cutoff control to adjust the cutoff frequency of the lowpass filter. The 121 DUAL VCF also features a 3-mode Fixed HPF switch where you can select between Off, 1 (1 kHz), 2 (2 kHz) or 3 (5 kHz). Combine this with the resonance and cutoff sliders to create intricate and interesting patches.

Installing the 121 DUAL VCF is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 121 DUAL VCF to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.70
FORTHCOMING
Behringer 140 Dual Envelope/LFO Module
Cat: 772884
 
dual envelope & LFO module
Notes: This is the Behringer SYSTEM 100 140 DUAL ENVELOPE/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 140 DUAL ENVELOPE/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 140 DUAL ENVELOPE/LFO features 2 independent ADSR envelope generators that can be controlled via an external gate or manual triggering. Each envelope generator comes with a Manual Gate that you can press and hold to start the envelope cycle; independent Attack, Decay, Sustain and Release controls to adjust the rate of these parameters and 3.5 mm envelope outputs that allows you to send up to two positive wave forms out to two modules and one negative wave form.

The LFO on the 140 comes with 5 waveforms: sine, triangle, square, ramp and saw tooth. The Frequency Range switch which sets the oscillating frequency of the LFO along with the Frequency and Delay sliders gives the 140 unparalleled flexibility when it comes to shaping LFO's. You can also connect an external trigger switch which can work with the Delay control to phase lock the LFO to your keyboard playing.

Installing the 140 DUAL ENVELOPE/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.70
FORTHCOMING
Behringer 150 Ring Mod/Noise/S&H/LFO Module
Cat: 772880
 
150 ring/mod/S&H/LFO module
Notes: This is the Behringer SYSTEM 100 150 RING MOD/NOISE/S&H/LFO. An authentic reproduction of the original System 100M circuitry from the 80's that can fit in a standard Eurorack case- at a very affordable price. Mix the 150 RING MOD/NOISE/S&H/LFO in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The 150 RING MOD/NOISE/S&H/LFO comes with a ring modulator to create some metallic and bell-like sounds that can be applied to any signal such as a sine wave or a signal from an LFO via the EXT SIG X/NOISE and EXT SIG Y/LFO jacks and out the RING MOD output. The LFO features 5 waveforms including sine, triangle square, ramp and sawtooth. Parameters can be further adjusted by the FREQ and DELAY sliders.

If you want to start layering your song on a droning note or maybe just create some ambience in your music, then you can connect any external signal source into the S&H circuit. A 3-way selector switch allows you to select which type of signal being introduced into the SIG IN jack whether its External Input, LFO or Noise.

Installing the 150 RING MOD/NOISE/S&H/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $88.03
FORTHCOMING
Behringer 173 Quad Gate/Multiples Module
Cat: 772876
 
quad gate & multiples module
Notes: This is the Behringer SYSTEM 100 173 QUAD GATE/MULTIPLES. An authentic reproduction of the original System 100M circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 173 QUAD GATE/MULTIPLES in with your existing rig to expand its capabilities and you're sure to have a lot of fun.

The SYSTEM 100 173 QUAD GATE/MULTIPLES Module features 4 signal gates (switches) with buffered audio inputs and outputs for immediate signal switching. This provides users the option to choose between a control gate operation, non-inverting (active high) input or an inverting (active low) input.

6-channel multiples, each with 4 floating parallel connectors, are available for optimal signal integrity. You can now send out your signal to other modules to help you create more intricate patches and deliver more compelling sounds from one source.

Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the SYSTEM 100 173 QUAD GATE/MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $91.31
FORTHCOMING
Behringer 3 Tier Eurorack Module Stand Case
Cat: 780468
 
module stand case
Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.
Read more
coming soon $68.47
Behringer 902 VCA Module
Behringer 902 VCA Module (eurorack module)
Cat: 772937 Rel: 19 Jun 20
 
VCA module
Notes: Enter the Behringer 902 VOLTAGE CONTROLLED AMPLIFIER. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 902 module features two signal inputs and two signal outputs that can be used to amplify two sources, either audio or control voltage, at the same time via a 3.5 mm connector. A rocker switch allows you to toggle between linear and logarithmic response modes while you can manually set the control voltage with the Fixed Control Voltage knob. Control inputs at the bottom of the module can accept control voltage signals from other modules to be change the amplification level.

Installing the 902 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 902 to be mixed with other synth modules for a truly unique set up.
Read more
 3 in stock $57.60
Click for better price!
or call +44 20 7424 1960
quote 772937
FORTHCOMING
Behringer 903A Random Signal Generator
Cat: 772802
 
signal generator
Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.

Read more
coming soon $56.52
Behringer 904A VC Low Pass Filter Module
Cat: 772780 Rel: 19 Jun 20
 
low pass filter module
Notes: No prizes for guessing that this one's inspired by the legendary Moog 904-A filter, but offered at Behringer's hugely tempting affordable price point. Silky, fat filter with tons of character.

Supplier notes:
Enter the Behringer 904A VOLTAGE CONTROLLED LOW PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER features a cutoff frequency knob that lets you decide which frequencies to attenuate. The resulting frequency is determined by this knob giving you the ability to change your sound with one turn.

Three Control Inputs plus audio ins and outs are available to send the processed signal to other modules and to connect voltage signals from other modules to affect the cutoff frequency.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER provides you control of the resulting frequency and internal feedback with the Fixed Control Voltage and the Regeneration knob. A switch also allows you to command the frequency range by letting you decide which frequency band you want to operate in. This gives you real-time access to all important parameters with one module.
Read more
 4 in stock $106.52
Click for better price!
or call +44 20 7424 1960
quote 772780
FORTHCOMING
Behringer 904B VC High Pass Filter Module
Cat: 772804
 
filter module
Notes: Enter the Behringer 904B VOTLAGE CONTROLLED HIGH PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904B VOLTAGE CONTROLLED HIGH PASS FILTER allows you to attenuate low frequencies and accentuate higher ones in a signal. With the Fixed Control Voltage knob, also known as a cutoff frequency, determines the frequencies attenuated below a certain point. Switch the Frequency Range between Low (4 Hz to 20 kHz) or High (10Hz to 50 kHz) to select what frequencies the Fixed Control Voltage affects. You can use the 904B to let you cut through a mix for some searing lead tones or pair it with the Behringer 904A VOLTAGE CONTRLLED LOW PASS FILTER and be prepared to hear some very interesting sounds.

Audio in and out connectors are available on the 904B that let you process an incoming signal before sending it to another module via a 3.5 mm TS cable. You can also use the Control Inputs to connect voltage signals from other modules to affect the cutoff frequency. Use this module to add distinct tweaks to your patches so you can create more unique sounds.

Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 904B VOLTAGE CONTROLLED HIGH PASS FILTER to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.70
Behringer 911 Envelope Generator Module
Cat: 772936 Rel: 19 Jun 20
 
envelope generator module
Notes: Enter the Behringer 911 Analog Envelope Generator. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 series envelope generators used by the world's most famous pop, rock and jazz musicians. Now musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth to complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 911 Module allows you to create a deeply contoured signal with its 4 independent controls for Attack (T1), Decay (T2), Release (T3) and Sustain levels from 0 to +5 Volts. Create snappy and percussive sounds or long evolving drones perfect for a funky groove or a brooding soundtrack to your latest cyberpunk epic.

For a more flexible setup, the 911 features a trigger input where you can connect an external trigger system like a keyboard via a 3.5mm TS cable as well as an output to send the envelope to another module

Installing the 911 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911 to be mixed with other synth modules for a truly unique set up.
Read more
 3 in stock $51.08
Click for better price!
or call +44 20 7424 1960
quote 772936
Behringer 911A Dual Trigger Delay Module
Cat: 773000 Rel: 19 Jun 20
 
dual trigger delay module
Notes: Enter the Behringer 911A DUAL TRIGGER DELAY. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 911A comes with two delay triggers with their own delay time controls ranging from 2 ms up to 10 seconds and their own 3.5 mm S-Trig ins and outs. Connect the 911A to the Behringer 911 ENVELOPE GENERATOR module and turn your Attack/Decay/Sustain/Release (ADSR) module into a Delay/Attack/Decay/Sustain/Release (DADSR) module. Rather than just playing the note when the signal is triggered, the 911A creates a nice volume swell effect, rising from 0 until the peak volume then going through the rest of the phases set in the envelope generator.

The delays in the 911A can be coupled in three different ways. In the Off setting, the delays are triggered separately via the trigger inputs. In Parallel mode, the trigger connected to the input at the top section will activate both delays at the same time. Switching the knob to Series will trigger the top section first then the lower section after.

Installing the 911A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911A to be mixed with other synth modules for a truly unique set up.
Read more
 9 in stock $54.34
Click for better price!
or call +44 20 7424 1960
quote 773000
Behringer 921A Oscillator Driver Module
Cat: 772998 Rel: 19 Jun 20
 
oscillator driver module
Notes: Enter the Behringer 921A OSCILLATOR DRIVER. An authentic reproduction of the circuitry from the Modular 55 and 35 series oscillator drivers used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921A OSCILLATOR DRIVER module features a frequency knob that can adjust between either octave or semitone frequencies. The included rocker switch can be used to select between the two frequency types. The width of the rectangular wave is adjusted via a control knob that goes from 10% up to 90%. You can also connect any incoming control voltage or modulation signal into either of the 3.5 mm Frequency or Width inputs.

The 921A not only controls just one 921B Oscillator, but 12 of them- providing you with more flexibility and more nuanced waveforms.

Installing the 921A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921A to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $84.77
Click for better price!
or call +44 20 7424 1960
quote 772998
FORTHCOMING
Behringer 921B VCO Module
Behringer 921B VCO Module (oscillator module)
Cat: 780467
 
VCO module
Notes: Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $108.70
FORTHCOMING
Behringer 923 Filters Module
Behringer 923 Filters Module (eurorack module)
Cat: 772935
 
filters module
Notes: Enter the Behringer 923 FILTERS. An authentic reproduction of the circuitry from the Modular 35 and 15 series filters used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 923 features separate Low and High Pass filters each with their own dedicated frequency cutoff controls. The Low Pass filter control will roll off all frequencies above the set threshold frequency from 10Hz to 10KHz while the High Pass filter control will roll off frequencies below the set frequency. Each filter comes with their own 3.5 mm ins and outs giving you the ability to route incoming signals through the IN jack, through the filter and back out the OUT jack.

For you to shape an endless number of tones, the 923 comes with a white and pink noise generator. Use the parallel jacks for each of the noise sources to send out a white or pink noise signal and start sweeping frequencies to build tension and excitement in your songs, or use them to create some percussive sounds for a real groovy drum beat.

Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $86.96
FORTHCOMING
Behringer 960 Sequential Controller
Cat: 781518
 
controller module
Notes: An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard EURORACK case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

100 mA +12V
50 mA -12V
0 mA 5V
47 mm deep
O 5.00


Read more
coming soon $142.39
FORTHCOMING
Behringer 961 Interface Module
Cat: 772932
 
interface module
Notes: Enter the Behringer 961 INTERFACE Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 961 features an audio to V-Trig Converter, allowing you to plug in any audio source and transform it into a voltage trigger to drive other modules in your rig. Dual S-Trig to V-Trig and a multichannel V-Trig to S-Trig converters on the 961 can be utilized to switch or control a particular function on other modules.

Controls on the 961 include a Sensitivity knob that adjusts the gain of the audio signal coming into the module via the Audio In jack. Column B in each V-Trig In bank has a Switch-On Time knob you can use to manually control how short or long the "ON" duration is for S-Trig signals. This feature is normally used to drive the 911 envelope generator. Add a 960 sequential controller to release the full creative potential of this interface module.

Installing the 961 INTERFACE is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 961 INTERFACE to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $86.96
Behringer 962 Sequential Switch Module
Cat: 772888 Rel: 19 Jun 20
 
sequential switch module
Notes: Enter the Behringer 962 SEQUENTIAL SWITCH Module. An authentic reproduction of the discrete circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 962 is used as a latch, shifter and signal selector. Depending on the number of input jacks plugged into the module, the 962 can alternate between two or three signal inputs. It can also be used to expand the Behringer 960 SEQUENTIAL CONTROLLER from an 8-step sequencer up to a 24-step sequencer.

The 962 SEQUENTIAL SWITCH features 3-channel V-Trig inputs for selecting CV input channels and separate V-Trig outputs per channel. Triggers from other modules can be connected via 3.5 mm cables and can be manually selected with the Trigger buttons.

The SIG IN jacks are what allow the 962 to alternate between inputs. Connect an input signal to input 1 or 2 and the 962 will alternate between these two inputs. If all three inputs are used, then the module will automatically alternate between the three stages.

Installing the 962 SEQUENTIAL SWITCH is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 962 SEQUENTIAL SWITCH to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $61.95
Click for better price!
or call +44 20 7424 1960
quote 772888
Behringer 992 Control Voltages Module
Cat: 772814 Rel: 19 Jun 20
 
Control voltages module
Notes: Enter the Behringer 992 CONTROL VOLTAGES Module. An authentic reproduction of the circuitry from the Modular 55 & 35 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 992 CONTROL VOLTAGES features 4 channels for CV signals routing to the 904A LPF module. This allows your sound to be freely connected/disconnected with a flip of a switch. Putting the switch in its up position means that you are allowing your signals to connect to other modules and vice versa.

An external input is available If you have an additional input you want to connect to the 992 CONTROL VOLTAGES module. And with the inverting Attenuator knob, you can adjust the CV level of this signal by turning it clockwise to adjust the CV level from 0 to 10 or counterclockwise to change it from 0 to -10.

3 switched and summed CV inputs are present for the frequency control of VCF modules which can be connected via 3.5 mm TS cables. The 992 CONTROL VOLTAGES allows you to send out the combined voltage from all 4 inputs via 3 parallel CV outputs; which can drive multiple 904A LPF and 904B HPF modules for an unlimited number of sonic combinations.

Installing the 992 CONTROL VOLTAGES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 992 CONTROL VOLTAGES to be mixed with other synth modules for a truly unique set up.

Read more
 8 in stock $50.00
FORTHCOMING
Behringer 994 Multiples Module
Cat: 772832
 
multiples module
Notes: Enter the Behringer 994 MULTIPLES Module. An authentic reproduction of the circuitry from the Modular 55 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The dual 4-socket multiples of the 994 MUTLIPLES allows you to split CV or audio signals to multiple destinations. Now, one signal can control several modules.

Installing the 994 MULTIPLES is simple as it was designed to fit into a standard Eurorack case. This allows for the 994 MULTIPLES to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $34.78
FORTHCOMING
Behringer 995 Attenuators Module
Cat: 772930
 
attenuators module
Notes: Enter the Behringer 995 ATTENUATORS. An authentic reproduction of the circuitry from the Modular 55 and 15 series attenuators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 995 features three separate attenuators each with their own independent inputs and outputs. The attenuators can be used to adjust the level of the input signal passively from - 8 to unity gain and accept both audio and CV signals. Connecting a single signal to the first input will allow it to pass to all 3 outputs for up to 3 variable outputs of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 leaving input 1 to feed out of output 1.

Installing the 995 is simple as it was designed to fit into a standard Eurorack case. This allows for the 995 to be mixed with other synth modules for a truly unique set up.
Read more
coming soon $59.78
Behringer AMP800 Mini Amp Ultra Compact 4 Channel Stereo Headphone Amplifier
Cat: 493525 Rel: 14 Jun 13
 
4 channel stereo headphone amp with parallel link output
Notes: If you're tracking more than one musician at a time, or if everyone in a group wants to listen to a playback, you need a monitor distribution system. The compact, flexible AMP800 can power up to 8 pairs of headphones and up to 2 different stereo mixes.

The Behringer AMP800 features 4 totally independent stereo high power amplifier sections, each with dual outputs. You can use the phones level control plus the accurate 6 digit LED output meter per channel for easy level monitoring. There are 2 balanced stereo main inputs with independent level and balance controls for individual mixes, selectable for all 4 of the headphone amplifiers.

If you must accommodate more than 8 listeners, a parallel link output enables cascading of several AMP800s. Long term reliability is guaranteed thanks to high quality potentiometers and illuminated switches, and Behringer's ultra low noise audio operational amplifiers provide outstanding sound performance. In addition, all Mini Series Behringer models can be stacked to create an ultra compact signal processing solution.
Read more
 6 in stock $52.16
Click for better price!
or call +44 20 7424 1960
quote 493525
FORTHCOMING
Behringer B906 Dynamic Microphone
Behringer B906 Dynamic Microphone (instrument microphone)
Cat: 772981
 
dynamic microphone
Notes: A super cardioid dynamic mic that's custom designed for great instrument reproduction! The B 906 instrument microphone is especially tailored for guitar amps, and is also excellent for percussion, horns and vocals.

The B 906 features a switchable presence filter which allows you to tailor the sound characteristics to different sound requirements and styles. The filter is adjusted via a slide switch on the microphone with different positions to boosts the presence for aggressive metal rhythm guitars or for classic rock and smooth jazz and blues sounds.

You can hang the B 906 on a guitar amp for stand-free performance. Its laterally mounted capsule has been specially developed for miking guitar amps face on and extremely close to the signal source. Due to its flat design, the B 906 is also very suitable for use with drums, since it can easily be positioned in cramped space conditions. The super cardioid pattern is great for reducing bleed in tight situations onstage, and the B 906's hum compensating coil rejects interference.
Read more
coming soon $41.30
Behringer BA 19A Condenser Boundary Microphone
Cat: 772983 Rel: 19 Jun 20
 
condenser microphone
Notes: The Behringer BA 19A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule and XLR connection, BA 19A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The BA 19A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure level.

The BA 19A features a switchable presence filter which allows you to tailor the sound characteristics to different sound requirements and styles. The filter is adjusted via a slide switch on the microphone with different positions to boosts the presence and to boost the joy.

Place your Behringer BA 19A inside the kick drum and point towards the beater and you will capture the attack as you want it. You also can position the mic just inside the drum at the air hole, you will capture more weight and less attack.
Read more
 More than 10 in stock $60.86
Click for better price!
or call +44 20 7424 1960
quote 772983
Behringer CAT Analogue Synthesizer
Cat: 772857 Rel: 18 Jun 20
 
analogue synthesiser
Notes: The Octave Cat isn't the best known synth that Behringer have turned their attention to, but it's well worth a look. Similar in approach to the Odyssey but with an even broader sonic range, going from warm and fat to tough and edgy.

Supllier notes:
Great care has been taken in engineering the CAT, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs that come together to recreate classic tones that are evocative of classic electronic music. This highly-focused attention to detail is what gives the CAT its ultra-flexible sound shaping capability. It gives you the ability to cover a lot of amazing tones from super-fat bass, tasty leads - and all the way to full on dreamy ambience from the far reaches of your imagination.

The synthesizer tracks laid down in the 1970s and 80s in progressive rock, wave and synth-pop have become classics and have inspired many other artists.

The CAT has the ability to accept any keyboard controller via MIDI. The signals generated can be tweaked via the Pitch Bend slider which can bend a note up or down one octave. Bump this up to two octaves by flipping the Octave Shift switch up or down. Use the Glide slider to change how fast a note transitions to another; up is faster, down is slower. Combine that with the LFO Freq slider to control the LFO and ADSR repeat tempo and you can create some amazing pulsating portamentos.

The very heart of the CAT's sound is its two VCOs. The Duophonic/Paraphonic nature of the CAT allows both oscillators to be controlled independently. Use the Fine and Coarse Frequency controls to tune VCO1 to VCO2. Keyboard control on the CAT can be set to either Mono or Poly. Poly mode lets VCO1 generate the highest note played on the keyboard while VCO2 handles the lowest allowing two notes to be played simultaneously. Setting the switch to Mono mode makes VCO1 generate the lowest note depressed on the keyboard.

Waveform switches on both VCOs allow different waveforms to be patched in from the LFO. Choose between Sine, Square, Sample and Hold and even pitch modulation through each VCO. Turning the Modulation Depth knobs in either direction controls the intensity of the effect. VCO2 also comes with a Sync switch that locks VCO1 with it and has them act as one huge oscillator to produce more complex waveforms and dramatic results. Mix VCO1 into VCO2 or vice versa and the CAT can produce some really tasty tones that make themselves at home in your next synth jam.

Each VCO on the CAT comes equipped with their own waveform sliders where you can adjust the volume of each type of VCO wave form. Pump up the Sub Octave, Sawtooth, Square, Triangle or Pulse waves or mix them all together and create some truly unique tones.

The CAT comes with another set of claws in the form of a VCF filter section. Here you can get more complex and robust tones by incorporating VCO1 into the mix. Introduce more waveforms and manipulate the Q slider to emphasize harmonics and Filter Cutoff slider which acts as a low-pass filter. Turn the CAT into a really funky bass machine or an out-of-this-world synth that creates some searing lead tones. You can even create some amazing drum sounds by manipulating the VCOs, VCF and ADSR.

The CAT features a whole slew of Inputs and Outputs that expand its capabilities beyond what you can see out of the box. You can route external control voltages to VCO1 or 2, the VCF and even pump in some external line-level audio into the CAT. You can even connect the CAT to other external synthesizers through the Gate, ADSR, AR or Keyboard Outputs. The CAT's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - and it provides vastly improved reliability and stability over its 1970s and '80s predecessors.

To give the signal even more character, you can use the CAT's Transient Generator to create a detailed voltage transient every time a key is depressed. Adjust the Attack, Decay, Sustain and Release via the matching sliders and to shape your signal. The AR transient generator works similarly to the ADSR but with less detailed control over the envelope. You can also set the ADSR to automatically repeat or only when a key is held down. The Sample and Hold switch can be set so the VCO1 setting is sampled or, when set to Noise mode, produce a random output pattern. Slide the LFO Delay control up or down to determine when the LFO will reach its maximum output after a key is depressed.

The CAT has 47 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation.
Read more
 9 in stock $291.31
FORTHCOMING
Behringer CB100 Condenser Gooseneck Microphone
Cat: 772994
 
condenser gooseneck microphone
Notes: CB 100 is a very directional microphone, best at isolating from other nearby instruments on stage. You chose the right mic for your instrument to ensure the greatest sound which blocks out the bleed from other sound sources.

The placement of the mics can make a huge difference on the character of the sound you create. You have chosen the right instrument mic with flexible and stable gooseneck, now all you need do is to place the mic in the sweet spot for the best harmonics and enjoy the music you make.

CB 100 is the most versatile microphone which allows you to mic up every instrument- you won't ever need another microphone for miking up.
Read more
coming soon $39.12
Behringer CP3A-O Oscillator Controller Module
Cat: 772823 Rel: 19 Jun 20
 
oscillator controller module
Notes: Enter the Behringer CP3A-O OSCILLATOR CONTROLLER module. An authentic reproduction of the circuitry from the Modular 55 and 35 series mixers used by the world's most famous pop, rock and jazz musicians. Now musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The CP3A-O Module features 4 routing switches that enable you to send Control Voltages to one or more oscillators. Switches 1 to 3 are connected to Control Inputs 1, 2 and 3; switch 4 can be used to route an external Control Voltage signal via a 3.5 mm TS plug and can be controlled by an attenuator knob.

You can route up to three external control voltage signals to any of the three summed Control Inputs. Signals from these inputs can be combined by flipping any of the matching routing switches on. The parallel jacks at the bottom will route the final combined voltage signal to any module they're connected to. A great way to utilize the CP3A-O is to have it drive multiple 921A or B oscillator modules which can allow you to create more intricate patches and hours and hours of fun.

Installing the CP3A-O is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the CP3A-O to be mixed with other synth modules for a truly unique set up.
Read more
 7 in stock $46.74
Behringer DI100 Ultra DI Professional Battery/Phantom Powered DI Box
Cat: 493501 Rel: 14 Jun 13
 
Active DI box powered by batter or phantom power
Notes: With the DI100, you can rest assured that your sound source will reach the console balanced and noise free. Behringer's take on the all important active DI box gives you functionality, durability and incredible sound at a remarkable price.

Plug into the DI100's balanced 1/4" TRS or XLR input, then send a signal to your console via the balanced XLR output. You can even plug your guitar or bass amp's speaker output into the DI100, which can handle ratings of up to 3,000 Watts and still deliver a perfect signal. It also features a 1/4" link jack to send your signal to an on stage amplifier.

The DI100 also has a switchable attenuation pad, allowing input levels of up to +50dB. There is also a ground lift switch to eliminate noise associated with ground loops. The DI100 also features Behringer's renowned OT-1 output transformer.
Read more
 More than 10 in stock $28.25
FORTHCOMING
Behringer DI4000 V2 4-Channel Active DI Box
Cat: 780466
 
4-channel direct input box
Notes: The ULTRA-DI PRO DI4000 gives you 4 first-class DI channels in a single rack space. Each channel is equipped with two Inputs (XLR and 14" TRS), a balanced XLR Output - and a 14" Link output to connect to your amp or monitor console. Plus, the DI4000 is designed to accommodate virtually any input signal, up to 40 dB of switchable input attenuation and up to 20 dB of gain, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4000 takes the DI box to the next level with a special 8 kHz High-Cut filter per channel for guitar applications, along with a Phase Reverse switch for optimal signal alignment. Additionally, our DI4000 active DI features "buffered" inputs that respect your source signal much better than passive DI boxes can - outputting optimally-balanced, extremely low-impedance (600 O) signals that are far less susceptible to noise and RF Interference (RFI).

The DI4000 does much more than just "bass guitar in, mic-level signal out". It really is a highly versatile input-signal toolkit. Here are just two advantages the DI4000 has over standard DI boxes: Maybe you'd like to connect your guitar amp's speaker output to your mixer? Not a problem, the DI4000 features two -20 dB attenuation switches per channel, allowing you to connect to speaker outputs rated up to 3,000 Watts - and convert them to balanced XLR outs! Weak incoming signal? The DI4000 has a +20 dB switch, which really comes in handy for boosting low-level input signals to balanced signals with real power and rock-solid impact. Worried about fluctuating voltages in the venue? The DI 4000 is equipped with an internal switch-mode power supply that ranges from 100 to 240 V and automatically adapts to mains voltages wherever you go. Of course, the DI4000 provides a Link output for easy connection to other equipment, such as your onstage amplifiers and monitor consoles. Servo-balanced performance guarantees ultra-flat frequency response - and the gold-plated XLR output connectors provide reliable, low-noise operation. Per channel ground-lift switches eliminate ground-loop hum issues. The DI4000 does everything a standalone DI can do, and much more - times four!
Read more
coming soon TBA
Behringer DI400P Ultra DI High Performance Passive DI Box
Cat: 493504 Rel: 25 Aug 16
 
Passive DI box with impedance and signal matching
Notes: The Behringer Ultra DI DI400P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI400P as your go between, impedance matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.

With its parallel 1/4" in and out jacks, the DI400P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR Output sends a balanced signal to your mixer. A ground lift switch eliminates hum associated with ground loops and our high performance transformer provides the ultimate in signal integrity.

The Ultra DI DI400P is compact and we house it in a tough, road ready metal case. This means the DI box will give you great sound gig after gig, session after session. And thanks to its low price, you can afford to outfit the entire band!
Read more
 More than 10 in stock $21.20
FORTHCOMING
Behringer EP2000 Professional 2000 Watt Stereo Power Amplifier
Cat: 781358
 
stereo power amplifier
Notes: The EP2000 has become one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP2000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 2,000-Watts of output power (2 x 1,000 Watts @ 2 Ohms; 2 x 750 Watts @ 4 Ohms; 2,000 Watts @ 4 Ohms in Bridge mode), the EP2000 is the perfect amplifier for medium- sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of the EP2000 provides all of your amp's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Each of the 2 channels feature dedicated Gain controls and Signal LEDs, that light up when a signal is present at the input, as well as Clip LEDs to indicate when input adjustments are required.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called ATR or Accelerated Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps react instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP2000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.
Read more
coming soon $286.96
FORTHCOMING
Behringer EP4000 Professional 4000 Watt Stereo Power Amplifier
Cat: 781355
 
stereo power amplifier
Notes: The EP4000 builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 4,000-Watts of output power (2 x 2,000 Watts @ 2 Ohms; 2 x 1,400 Watts @ 4 Ohms; 4,000 Watts @ 4 Ohms in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, the EP4000 reacts instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP4000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP4000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP4000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.
Read more
coming soon $344.57
Behringer Europort MPA30BT Portable PA Speaker (B-STOCK)
Cat: 753484 Rel: 30 May 17
 
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Use the extremely lightweight, yet powerful EUROPORT MPA30BT PA system to stream songs from your Bluetooth-enabled iOS device at the next company picnic, or to get your message across on the playing field. With its 30-Watt amplifier and premium 2-way speaker system, the MPA30BT provides superb sound for up to 100 people - and the rechargeable battery lasts up to 20 hours. You can use a traditional-style microphone, or up to 2 of our ULM digital microphones (mics not included) to create a supremely easy-to-use wireless, go-anywhere PA system!

Bluetooth Ready:

The days of tape decks and CD players are long gone. Now your music lives on your smartphone or computer tablet, so you can stop searching for those outdated cables and fancy adapters. Now with a simple wave of your hand, you can stream music from any Bluetooth-equipped device such as your iPad, iPod touch, iPhone or even your laptop computer. Now, isn't that easy?

Ultra-Portability:

The great-sounding MPA30BT is amazingly-lightweight (10.7 lbs/4.9 kg) thanks to its highly efficient Class-D amplifier, and the onboard battery pack keeps the party going for up to 20 hours - without a power outlet in sight!

Built-in Mixer & Wireless Option:

Loaded with features, the MPA30BT comes equipped with an onboard 2-channel mixer with the same ultra-low noise, high-headroom mic preamps that have made our mixers legendary, plus an Aux input for that aforementioned CD player. Also included is Bluetooth connectivity for streaming audio directly from your iOS device, and our proprietary ULM wireless technology. Sold separately, BEHRINGER ULM Series digital mics integrate seamlessly to expand your MPA30BT system to handle virtually any live sound application.

Sound Value:

Whether you set your MPA30BT speakers on a table, or mount them on optional speaker stands, you'll enjoy music streaming through this rich-sounding, easy-to-setup system in mere moments. See your BEHRINGER dealer, or order your EUROPORT MPA30BT online - and put a little easy in your life today!
Read more
 1 in stock $99.84
FORTHCOMING
Behringer Eurorack Go Case
Cat: 772854
 
eurorack case
Notes: The EURORACK GO was engineered specifically to protect your favorite synthesizer modules and similar 3U electronics. With 2 rows of 140 HP useable mounting space (for a total of 280 HP), the rugged aluminum chassis features 96 sliding nuts for ultra-easy positioning of your precious gear. In the studio or on the road, the EURORACK GO is the ideal way to protect your rig - wherever the gig takes you.

One of the features that separates EURORACK GO from competing products is the massive, ultra-low noise power supply. The auto-ranging universal switch-mode supply works anywhere in the world and uses 32 keyed power connectors to protect your valuable modules from accidental reverse power hookup.

Designed for rugged reliability, the all-aluminum chassis houses an adjustable support plus oversized rubber feet to provide 0-50- setup capability and ensures rock-solid stability for use on a wide range of surfaces.

Read more
coming soon $276.09
FORTHCOMING
Behringer Eurorack Rack
Behringer Eurorack Rack (19" Eurorack rack mount)
Cat: 780464
 
rack-mount kit with power supply
Notes: The EURORACK RACK is ideal for any Behringer Eurorack-style synthesizer or equipment. This desktop/rack-mount kit converts a 19" rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus boards are included together with a 3A universal power adapter. 52 sliding nuts allow you to easily position your modules so you can freely position your synth wherever you need it.
Read more
coming soon TBA
Behringer FBQ6200HD Ultragraph Pro 31 Band Stereo Graphic Equaliser
Cat: 608872 Rel: 03 May 16
 
High-definition 31-band stereo graphic equalizer with FBQ feedback detection system
Notes: Ultragraph pro FBQ6200HD:
Professional audio engineers have known for decades that a good EQ makes all the difference in how a performance is perceived. Although multi-band graphic equalizers have been around for a long time, they have changed very little... until now! The ULTRAGRAPH PRO FBQ6200HD takes the graphic equalizer into the realm of high-definition audio, providing robust features and our proprietary FBQ Feedback Detection System - at a price that makes them a must-have for anyone who records or operates a live sound system.

How Does Equalization Work?
Imagine the audio frequency range as a very wide highway with lots of "lanes". Each of these lanes represents a specific frequency band.
The lanes on the left side contain the really low frequency content, mainly bass, bass vocals, and the kick and tom drums
The middle lanes make up the fundamental zone of most musical instruments and the male and female vocals
The right-hand lanes have all the high-frequency stuff, such as snare drums, cymbals, higher pitched percussion instruments and the content that adds sizzle to the mix

FBQ - Totally Feedback-Free
For more than 20 years, BEHRINGER has designed and manufactured some of the most successful FBQ Feedback Elimination processors. Now you can own and enjoy the benefits of this technology, as we have integrated the revolutionary FBQ Feedback Detection System into this product, so your sound system is completely feedback-free, allowing you to focus on your performance. Utilizing an ultra-fast feedback detection system, this ingenious circuitry helps you recognize and tame feedback frequencies immediately. When feedback is sensed in a specific frequency range, the LED on the associated EQ fader illuminates, showing you at a glance which fader to lower to overcome the feedback. That simple!

Ultra-Low Noise Operation
The high-definition FBQ6200HD provides superb, ultra-low noise performance thanks to top-notch German engineering, and the use of highest-quality components. Industry-leading 4580 dual operational amplifiers are employed throughout for the utmost signal integrity across the entire audio spectrum. With 31-bands of smooth and precise equalization per channel, the stereo FBQ6200HD adds the finishing professional touch to your recordings and live shows.

Special Tools for Low and High Frequencies
The low-frequency sound range requires special attention. That's why the FBQ6200HD features ultra-precise, variable High- and Low-Cut filters on each channel, with a sweepable frequency that helps remove non-essential bass content, such as floor rumble, room resonance and electrical hum, etc., which really uses up your power amp's headroom. This added high-precision control gives the FBQ6200HD the power to accurately fine-tune your system's overall sound, creating crystal clear and dynamic output - with incredibly tight and punchy bottom-end!

Built in Crossover
Speaking of special low-frequency tools, the FBQ6200HD also has a dedicated subwoofer output with an adjustable (30 - 200 Hz) cut-off frequency. Balanced XLR Outs are provided so you can connect to power amps or directly to your active subwoofers, without any additional hardware. Just another example of how BEHRINGER saves you money.

Stereo or Double-Duty?
The FBQ6200HD is designed to improve your sound from every angle: it's a great stereo Front Of House (FOH) equalizer; or, you could use one side for mono FOH, while the other side EQs your monitors - which is where you need the maximum feedback control.

FBQ6200HD - Much More Than Just a Great EQ
Sure it's an incredible high-definition graphic equalizer, but the FBQ6200HD has even more features, such as switchable limiters on each channel with separate Threshold controls, long-throw 45 mm frequency faders for added precision, and a built-in Pink Noise generator that enables the FBQ6200HD to function as a highly-accurate audio spectrum analyser.

Superb Audio, Sound Value
When you want to bring out the very best from your sound system or your performance, in the studio or at your next live gig - put your trust in the ULTRAGRAPH PRO FBQ6200HD. We dare you to compare it to the competition. Once you do, you'll choose BEHRINGER again and again for both audio quality and value.
Read more
 5 in stock $134.78
Behringer HPX4000 Headphones (black)
Cat: 238116 Rel: 23 Oct 06
 
High-definition DJ headphones
Notes: Whether in the DJ booth or mixing at home, the Behringer HPX4000 DJ headphones display impressive sound separation that meet the demands of serious audiophiles. Incredibly comfortable to wear, the HPX4000 deliver high-definition bass and super-transparent highs with an ultra-high dynamic range.

The Behringer HPX4000 headphones feature high-quality components, with high-efficiency cobalt capsules and a single-sided cord with oxygen-free copper wires as well as round swiveling ear cups. They are conceived and designed by Behringer Germany.
Read more
 7 in stock $19.29
Behringer K2 Analog Semi Modular Synthesiser
Cat: 688736 Rel: 19 Jun 20
 
Analog semi-modular synthesiser based on Korg's legendary MS20
Notes: Channelling the Korg MS20, Behringer serve up a desktop module with attitude. Semi-modular design plays nicely with Eurorack gear to add a dose of the aggro MS sound to your rig.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, the K-2 lets you conjure up virtually any sound with incredible finesse and ease. With its pure analog signal path, dual authentic VCOs with 4 selectable waveforms each, plus extremely flexible VCF and VCA filters, the K-2 is sure to become your favorite keyboard. Owning the K-2 is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Your K-2 comes ready to rock, thanks to its default signal routing that doesn't require lifting a single patch cable to instantly create amazing sounds. The semi-modular architecture lets you easily tap into the inspired sounds of 1980s and '90s progressive rock, wave, EDM and synth-pop music synthesizer tracks that made rock and roll history - or to design incredibly fat and original sounds that will make you a legend in your own right!

The very heart of K-2's sound is its versatile 6 dB High/12 dB Low filter, which lets you freely experiment with the High and Low-Pass Cutoff Frequencies and their respective peak (resonance) settings to dial in the perfect sound. The high-pass filter sets the level of signals below the cutoff frequency, effectively reducing the fundamental and lower-order harmonics levels. The low-pass filter controls the level of signals above the cutoff, which reduces higher-order harmonic content. K-2's VCF Peak controls provide emphasis to the signals at the crossover frequency.

K-2's authentic Voltage Controlled Oscillators (VCOs) provides an incredible range of 4 variable oscillator shapes with variable pulse widths and ring modulation for the ultimate in sound creation. VCO 1 waveform choices include triangle, reverse-sawtooth, noise and pulse, where the pulse width can be adjusted from square wave to narrow across a 4-octave range (32', 16', 8', or 4'). VCO 2's waveform can be selected from reverse-sawtooth, square, narrow pulse and ring, where both oscillators are operating. VCO 2's pitch can also be varied independently across a 4-octave range (16', 8', 4' and 2'). The VCO Mixer allows you to adjust the levels of VCO 1 and VCO 2 to create an overall mix and a wide range of amazing effects.

K-2's Low Frequency Oscillator (LFO), the Modulation Generator, features a selectable Waveform (reverse sawtooth, triangle, sawtooth) with a sweepable frequency range from 0.1 to 22 Hz - and 2 separate Envelope generators to help you craft incredible sounds! Envelope Generator 1 affects the frequency modulation via controls for Delay, Attack and Release Time, while generator 2 adjusts the cutoff frequency modulation, as well as amplitude modulation of the Voltage Control Amplifier (VCA). Dials for this generator include Hold, Decay, Attack, Sustain, and Release for unparalleled envelope-shaping control.

While it is a monophonic instrument (one note at a time), K-2's 16-note Poly Chain function lets you combine multiple synthesizers for up to 16-voice polyphony - plus provides vastly improved reliability and stability over its 1970s and '80s predecessors.

Designed to handle the rigors of life on the road or in the studio, your K-2 can easily be transferred into a standard Eurorack case for the perfect integration into your existing system.

For those who want the numbers, K-2 has 36 controls, all laid out in a highly-intuitive format that puts the joy back into your music creation. And you can expand K-2's tone-sculpting capabilities beyond your wildest dreams by utilizing the multi-I/O patchbay to connect external devices at virtually any point in the signal path!
Read more
 6 in stock $285.87
Behringer MA400 MicroMon Ultra Compact Monitor Headphone Amplifier
Cat: 493528 Rel: 14 Jun 13
 
Compact noise free monitor headphone amplifier
Notes: The ultra compact MicroMon MA400 is the ideal personal monitor mixer for the performer who always asks for "more me".

The MA400 features XLR thru jacks and provides superb noise free operation. Just connect your mic to the mic input and send a line from the mic thru to your main mixer. You can even use studio grade condenser mics, as the MA400 will pass +48V phantom power, if your mixer is so equipped. The phones jacks accept both 1/4" and 1/8" headphone and earbud connections, making the MA400 ideal for hardwired IEM (in ear monitor) applications, such as singing drummers and keyboardists. The MA400 comes with a dedicated 12V DC power supply and an LED to indicate when it is powered up.

Capable of stereo or mono operation, the MA400 is a powerful little mixer that allows you to control two independent sources, a microphone and the monitor feed from your main mixer. Simply adjust the mon level control to a comfortable setting and then dial in all the "me" you want with the mic level control.
Read more
 7 in stock $21.47
FORTHCOMING
Behringer MIC2200 v2 Vacuum Tube Mic & Line Preamplifier
Cat: 780469
 
tube microphone/line preamplifier
Notes: Tubes can really warm up a signal fast, giving it increased depth and character. Though transistors have succeeded the technology, many musicians agree that tubes deliver a far superior sound. A true audiophile 2-channel Mic/Line preamplifier, the ULTRA GAIN PRO MIC2200's hand selected 12AX7 vacuum tube gives everything from microphones to acoustic or bass guitars that vintage tube vibe in a dependable and highly-affordable package. The onboard fully parametric EQs provide unparalleled tonal characteristics, allowing you to sculpt instrument and vocal sounds with the ultimate precision and musicality.

The MIC 2200 is perfect for studio and live applications. The balanced 1/4" TRS and gold-plated XLR inputs and outputs give you maximum flexibility in either scenario. It derives its personality from a hand-selected 12AX7 tube for superior tube character and low-noise operation. The MIC 2200 is ideally suited for use with standard digital recorders and sound cards, imbuing signals with the warmth, presence and classic tube-compression that will bring your digital tracks to life.

The incredible MIC2200's controls consist of: switches for +48 V phantom power, Phase Reverse, Lo Cut, EQ Frequency Range and EQ In/Out; plus Mic Gain, Lo Cut Frequency Octave Bandwidth, Level and Output knobs. A 12-segment LED meter provides accurate monitoring of output levels. And when used as a high-end DI (Direct Injection) box in the studio or on the stage, the MIC2200 delivers flawless performance and outstanding signal integrity. For further tone conditioning, the MIC2200 features a fully parametric EQ with adjustable center Frequency, Bandwidth and Level per channel. Both channels also feature independent phase reverse switches for maximum versatility.

The ULTRAGAIN PRO MIC2200 gives you the sound quality of a 2-channel vintage tube preamp and high-end DI box all-in-one - at a mere fraction of what a true relic of the 1960s would cost.
Read more
coming soon $129.34
Behringer MS-1 101 BU Analog Synthesizer (blue)
Cat: 688722 Rel: 19 Jun 20
 
analog synthesiser
Notes: Blue version of Behringer's tribute to the legendary Roland SH-101. Classic Roland-inspired 80s analogue sound with a gorgeously squelchy resonant filter and powerful oscillator with beefy sub.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BU lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BU is sure to become your favorite keyboard. Owning the MS-1-BU is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BU, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BU its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BU lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

MS-1-BU's authentic 3340 Voltage Controlled Oscillator (VCO) provides an incredible range of 4 simultaneously-mixable waveforms for sculpting the perfect sound. Options include: saw, triangle, square/pwm and octave-divided square sub-oscillator. Additionally, the VCO can be adjusted across a wide, 4-octave range (16', 8', 4', and 2'). This amazing flexibility gives you the tools needed to be your creative best.

The very heart of MS-1-BU's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BU's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BU's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BU are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BU has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BU has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BU's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BU has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.

Read more
 More than 10 in stock $291.31
Behringer MS-1 BK 101 Analog Synthesizer (black)
Cat: 688717 Rel: 19 Jun 20
 
analog synthesiser
Notes: Inspired by the amazing Roland SH-101, Behringer's MS-1 is a peach of an analogue mono synth, excelling at deep, elastic basslines but also amazing for arps, leads and FX.

Supplier notes:
An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-1-BK lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analog signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-1-BK is sure to become your favorite keyboard. Owning the MS-1-BK is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the MS-1-BK, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-1-BK its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-1-BK lets you recreate all of that magic - or design incredibly fat and original sounds.


The very heart of MS-1-BK's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-1-BK's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

MS-1-BK's Envelope generator features 4 ADSR (Attack, Decay, Sustain and Release) faders that help you craft incredible sounds, and utilizes a 3-position switch for Gate, Gate + Trigger and LFO. When applied to the Voltage Control Amplifier (VCA), the ADSR envelope is used to control the level of the note being played over time. When applied to the VCF, the ADSR envelope is used to control the cut-off frequency of the filter for each note played over time. In addition, the ADSR envelope can also be used to affect the VCO pulse width modulation.

MS-1-BK's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-1-BK are fun, mesmerizing and totally addictive.

When you're ready to strut your stuff and get a little centerstage time, the MS-1-BK has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level.

In addition to the great sound-sculpting features already mentioned, the MS-1-BK has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-1-BK's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip. You can even modulate the pulse wave via the LFO, envelope or manually - for sounds ranging from mild to wild!

For those who want the numbers, MS-1-BK has 57 knobs, faders and switches, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI I/O and Thru over USB/MIDI DIN; Velocity Out; CV; Gate; External Clock In; VCF CV In; Hold; External Audio; Phones; and main Output.
Read more
 More than 10 in stock $260.67
Behringer MS1 RD 101 Analogue Synthesiser (red)
Cat: 688721 Rel: 17 May 19
 
Analog synthesiser based on Roland's SH-101, with 32 full-size keys, 3340 VCO with 4 simultaneous waveforms, VCF, Novamod FM sources, 32-step sequencer, arpeggiator & live performance kit
Notes: The 1980s and '90s spawned a new "wave" of synth performers including Devo, The Chemical Brothers, The Prodigy, The Crystal Method and a host of others, all empowered by the sound of a simple strap-on instrument that let keyboardists steal the spotlight away from their guitar-wielding bandmates. An ultra-affordable homage to that iconic synthesizer with all the features of the original and then some, such as a 32-step sequencer, arpeggiator and live performance kit, the MS-101-BU lets you conjure up virtually any sound with incredible finesse and ease. With its 32 semi-weighted full-size keys, pure analogue signal path, authentic 3340 VCO with 4 simultaneously-mixable waveforms, plus extremely flexible VCF and VCA filters, the MS-101-BU is sure to become your favourite keyboard.

True to the Original:

Great care has been taken in engineering the MS-101-BU, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the MS-101-BU its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

Big, Fat Tones:

The inspired synthesizer tracks laid down in the 1980s and '90s are etched in the annals of progressive rock, wave, EDM and synth-pop music forever, making them truly classic in every sense of the word. The MS-101-BU lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

Versatile Oscillator:

MS-101-BU's authentic 3340 Voltage Controlled Oscillator (VCO) provides an incredible range of 4 simultaneously-mixable waveforms for sculpting the perfect sound. Options include: saw, triangle, square/pwm and octave-divided square sub-oscillator. Additionally, the VCO can be adjusted across a wide, 4-octave range (16', 8', 4', and 2'). This amazing flexibility gives you the tools needed to be your creative best.

Versatile VCF:

The very heart of MS-101-BU's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: cutoff Frequency (10 Hz to 20 kHz); Resonance (0 to self-oscillation); Envelope and Modulation depth, and Keyboard follow (0 to 100%) to dial in the perfect sound. MS-101-BU's VCF can be modulated via the ADSR, keyboard tracking and Bender controller. The Frequency Modulation (FM) Amount knob sets the depth, while the FM Source selector lets you further modify the signal by choosing from: pulse; sawtooth; sub oscillator 1 octave down; 2 octaves down; narrow 2 octaves down, and Noise.

The Envelope, Please:

MS-101-BU's Envelope generator features 4 ADSR (Attack, Decay, Sustain and Release) faders that help you craft incredible sounds, and utilizes a 3-position switch for Gate, Gate + Trigger and LFO. When applied to the Voltage Control Amplifier (VCA), the ADSR envelope is used to control the level of the note being played over time. When applied to the VCF, the ADSR envelope is used to control the cut-off frequency of the filter for each note played over time. In addition, the ADSR envelope can also be used to affect the VCO pulse width modulation.

Onboard Sequencer & Arpeggiator:

MS-101-BU's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or Step mode, which allows you to interact while composing a pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the MS-101-BU are fun, mesmerizing and totally addictive...

Own the Stage:

When you're ready to strut your stuff and get a little centre stage time, the MS-101-BU has that covered too! Just attach the included guitar strap and handgrip (with pitch bend wheel and a pitch modulation trigger), and take your performance to the next level. Why should singers and guitar players get all the limelight - carve out a little of your own!

Modulate Me to the Max!

In addition to the great sound-sculpting features already mentioned, the MS-101-BU has still more to offer. The noise generator can also be used as modulation source to create distortion-like effects, which will send your solo soaring into the stratosphere. Glide (portamento) lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate. MS-101-BU's Bender is also assignable to the VCO, VCF and pitch mod wheel on attachable handgrip.
Read more
 8 in stock $291.31
Behringer MX400 MicroMix Ultra Low Noise 4 Channel Line Mixer (B-STOCK)
Cat: 786651 Rel: 11 Apr 13
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Despite its ultra-compact size, this 4-channel line mixer is big on features! It yields the highest sonic quality at all output levels, boasting ultra low-noise 4580 operational amplifiers for outstanding audio performanceithe same op amps found in its much bigger brethren. Expanding on the capabilities of standard-size mixers is where the MX400 does extremely well, for example as a sub-mixer. If you are running short on available channels on your main mixer and need to bring the output of three different keyboards into your mix, you can simply connect them to the MX400, work out the keyboard mix, and connect the MX400's output to a single input on your main mixer. It will catch your eye because it's cute as a button, but you'll want to own one because of what it can do for your performance.

Read more
 1 in stock $21.34
Behringer Neutron Semi Modular Analogue Synthesiser
Cat: 677527 Rel: 29 Jun 18
 
Paraphonic analogue, semi-modular synthesiser with dual 3340 VCO's, multi-mode VCF, 2 ADSR's, BBD delay & overdrive circuit
Notes: An ultra-affordable leap into the warm world of analogue synthesis, the BEHRINGER Neutron gives you the power to create virtually any monophonic sound imaginable with incredible power and ease.

The pure analogue signal path is based on the legendary V3340 VCO chip with 5 variable oscillator shapes. Blend or switch the 2 oscillators and 5 LFO shapes for unique sound creation. For protection and convenience, the Neutron can even be mounted in a standard Eurorack, making it ideal for the studio and/or the road. Owning a Neutron gives you all the power of a monster modular synthesis system in a flexible package with the ability to create bewildering, complex sounds.
Read more
 4 in stock $280.43
Behringer NX3000 Class D Power Amplifier (3000W)
Cat: 699339 Rel: 25 Oct 18
 
Class-D amplifier with 3000 watts output
Notes: The NX range of power amplifiers pack large Wattages into exceptionally lightweight and rack-mountable packages. And because the NX range is so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts. Thanks to our 'Zero-Attack' limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX range full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure these feather-light powerhouses will drive your rig effortlessly for many years to come.

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

The front panel controls and indicators provide your systems vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1/4" TRS Input connectors, making the NX range compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.

The rear panel is also where you'll find the switches that enable the NX amp range to run in your choice of dual mono, stereo or mono bridge modes. The ranges built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channelled to your full-range loudspeakers.

Our new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX's design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction especially in the LF area.

Sporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag plus all the amenities a professional audio engineer could ask for the BEHRINGER NX range of power amplifiers are serious amps for your most demanding applications.
Read more
 More than 10 in stock $179.36
Behringer Odyssey Analogue Synthesizer
Cat: 688740 Rel: 19 Jun 20
 
analog synthesiser
Notes: Behringer's tribute to the ARP Odyssey is a pleasingly retro instrument. Fully analogue duophonic goodness with that classic tough ARP sound, great for bass and leads.

Supplier notes:
An ultra-affordable homage to the legendary ARP* synthesizer of the '70s and beyond with all the features of the original and then some including: dual VCOs; 32-step sequencer with onboard storage; arpeggiator and world-class Klark Teknik FX that boast reverb, chorus, flanger, delay, pitch shifter and multi-effects, the ODYSSEY lets you conjure up virtually any sound with incredible finesse and ease. With its 37 semi-weighted full-size keys, pure analog signal path based on authentic VCO, VCF and VCA designs from the '70s, the ODYSSEY is sure to become your favorite keyboard. Owning the ODYSSEY is like having your own personal time machine, enabling you to embrace the past - or make your imprint on the future!

Great care has been taken in engineering the ODYSSEY, including the true to the original analog circuitry, legendary VCO, VCF and VCA designs, all of which combine to make it easy to recreate the classic sound performance. This highly-focused attention to detail is what gives the ODYSSEY its ultra-flexible sound shaping capability, which covers everything from super-fat bass and lead tones to stunning effects - and all the way out to the otherworldly sounds of your imagination.

The inspired synthesizer tracks laid down in the 1970s are etched in the annals of progressive rock, disco and synth-pop music forever, making them truly classic in every sense of the word. The ODYSSEY lets you recreate all of that magic - or design incredibly fat and original sounds that will make you a legend in your own right!

ODYSSEY's 2 voices are the product of dual analog Voltage Controlled Oscillators (VCOs), which each provide your choice of: sawtooth, square/pulse with pulse-width modulation, or sine/square wave LFO for sculpting the perfect sound. This amazing flexibility gives you the tools needed to be your creative best.

The very heart of ODYSSEY's sound is its highly-flexible Voltage Control Filter (VCF), which includes faders for: Frequency; Resonance (0 to self-oscillation); and High Pass Filter (HPF) Cutoff Frequency. A feature missing from the original is a new 3-position switch, which lets you choose the VCF filter you prefer from all 3 iterations of the famous synth: 2-pole MKI (4023); 4-pole MKII (4035); and 4-pole MKIII (4075), plus a Drive switch to add a touch of edge to your sound.

ODYSSEY features two easy-to-use Envelope Generators, AR (Attack and Release) and ADSR (Attack, Decay, Sustain and Release) with 2 and 4 faders, respectively to help you craft incredible sounds. Switches are provided for ADSR Gate/LFO Repeat, AR Gate/LFO Repeat or thirdly, Keyboard Repeat/Auto Repeat - which provides a wide range of performance options.

ODYSSEY's sequencer allows you to program up to 32 steps of notes and rests and save them as a pattern. You can record, save and recall up to 64 patterns, all of which can be stored in the 8 banks, each holding up to 8 patterns. Your sequences can be played either in Keyboard mode, where you create and store the pattern, or in Step mode, which allows you to interact while composing the pattern. The onboard Arpeggiator features 8 patterns (you can use just by playing a chord, which the arpeggiator then sequences through your selected pattern. Both the sequencer and arpeggiator in the ODYSSEY are fun, mesmerizing and totally addictive.

For those who want the numbers, ODYSSEY has 35 sliders, 25 switches and 3 pressure-sensitive buttons, all laid out in a highly-intuitive format that puts the joy back into your music creation. Input and output connections include: MIDI In and Out over USB/MIDI DIN; Pedal; Portamento Footswitch; Low and High Outputs; External Audio In; CV In and Out; Gate In and Out, and Phones with a dedication Volume control.

In addition to the great sound-sculpting features already mentioned, ODYSSEY has still more to offer. There's the pink/white noise generator with sample & hold plus lag processor; Portamento, which lets you sweep seamlessly over time from one note to the next, creating smooth-as-silk transitions that few other instruments can emulate; and the 3 pressure-sensitive buttons for pitch and modulation control that provide a total hands-on performance. ODYSSEY is the ideal tone-making machine for creating sounds that run the gamut - from mild to wild!
Read more
 5 in stock $372.84
FORTHCOMING
Behringer P1 Personal In-Ear Monitor Amplifier
Cat: 781353
 
in-ear monitor
Notes: The POWERPLAY P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it's most useful - right at the artist's fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution.

The P1's high-power headphone output ensures that as the band gets louder, you'll still be able to hear every nuance of your performance. And the P1's simple user interface makes it easy for everyone to dial in a perfect mix every time.

Using the P1 also helps protect your hearing in two ways. First, thanks to a built-in current limiter, unexpected peaks in signal level won't get to your ears. Second, the simple act of wearing headphones or earbuds helps isolate your ears from loud stage volume of instrument amps and monitor wedges. With the P1, you can clearly hear your own performance and blend in the ideal amount of the rest of the band.

Dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the P1 and dial-in exactly what you want to hear as you perform. Two simple controls, Level and Balance, help you achieve the perfect mix in an instant. The P1 lets you take control of what you hear and allows the engineer to concentrate on providing the audience the best listening experience. Plus, setup is so fast and easy, letting you concentrate on putting on the best performance when you hit the stage.

One little 9 V battery lasts up to 12 hours, so the P1 will go as long as your next show or studio recording session! Or, use the optional PSU-SB DC power supply for the ultimate in dependable power. And the P1's metal chassis is built like a tank to handle even your most-demanding and energetic performance. Small enough to hang on your belt - or mount on a mic or drum stand, the P1 puts complete balance and volume control in your hands.

Read more
coming soon $50.00
FORTHCOMING
Behringer Podcastudio 2 USB Bundle with USB Audio Interface
Cat: 772939
 
podcasting bundle
Notes: The PODCASTUDIO 2 USB bundle has everything you need to make high-quality podcasts, produce your own music and home recordings - plus it works seamlessly with your PC or Mac* computer! All the software you'll need is provided- a XENYX 302USB mixer with built in USB/audio interface, XM8500 microphone, HPM1000 headphones and much more - you'll be up and running in mere moments, right out-of-the-box!

No matter what your audio mixing needs, the XENYX 302USB provides the performance and features that can take your talent to the next level. With its professional sound quality, 5 Inputs with the legendary XENYX mic preamp, built-in USB/audio interface, plus rugged reliability - the XENYX 302USB is ideal for both your live gigs and recording sessions.

The XM8500 dynamic microphone is a performing/home recording enthusiast's dream come true! This professional-quality microphone is designed to capture your sound with outstanding sensitivity and accuracy. With its cardioid pickup pattern for excellent sound source separation and feedback rejection, this ultra-wide frequency response mic is an excellent choice for any performing or recording scenario - and it's rugged enough to go the distance! With its integrated shock mount system, mic stand adapter, spherical wind and pop filter, all in an impact-resistant carrying case - the XM8500 just may be the only microphone you'll ever need.

HPM1000 headphones provide everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution capsules that deliver every nuance of your sound. Featuring a single-sided cord that resists tangling; an ultra-comfortable headband; and a 1/4" adapter for the 1/8" connector, HPM1000 phones are compatible with everything from your smartphone - to your mixing console.

Because you'll want to take full advantage of your XENYX 302USB's recording and podcasting potential, all the software you'll need for audio recording, editing and even podcasting is included - all free of charge and downloadable from behringer.com. You'll be ready to go live on your PC or Mac right out of the box. A free download of more than 150 virtual instruments and FX plug-ins is provided - turning your computer into a powerful home-based or mobile recording studio from input to output.

This amazing PODCASTUDIO 2 USB setup includes a: professional 5-input XENYX 302USB mixer with the studio-grade XENYX Mic Preamp; pair of high-quality HPM1000 headphones; great-sounding XM8500 dynamic mic - and all the cables and recording/podcasting software you'll ever need.
Read more
coming soon $98.91
FORTHCOMING
Behringer Pro-1 Analog Synthesiser
Cat: 781519
 
analog synthesiser
Notes: The Behringer Pro-1 is a clone of the popular retro classic Sequential Circuits Pro-One which was once conceived to be a monophonic Prophet-5. Those who know and love recordings of Depeche Mode and Yazoo, will enjoy recognizing a lot of those sounds with the Pro-1.

The two assertive oscillators, each based on a CEM3340 chip, have sawtooth and square waveforms, an octave switch, fine tuning and pulse width control. Oscillator A can be synchronized to oscillator B, the second tone generator is additionally equipped with the triangle waveform and can be switched to low mode as well as decoupled from the pitch control. Both VCOs are brought together in the mixer, where the noise generator is also located, which can be replaced by an external signal. The beautiful basic sound is processed with a characterful 24dB lowpass filter, also known as Curtis VCF. It behaves similar to a Moog filter, but due to the IC CEM3320 it sounds different than the transistor cascade. The two crisp ADSR envelopes are assigned to the filter and VCA. An LFO with three waveforms is connected to the targets via the modulation bus. The special features of this instrument include the waveforms that can be activated simultaneously in both oscillators and in the LFO.

The modulations are assigned on the left side of the control panel. The filter envelope, oscillator B and the LFO, each with their own attenuator, are available in parallel as sources. These are assigned to the targets frequency oscillator A+B, pulse width oscillator A+B and cutoff directly or via the modulation wheel (or midi controller). Wild oscillator drifts, sync sounds, sirens, FM for filter and/or oscillator A as well as pulse width modulation are possible if used with care. If you turn everything up at once, it gets really wild! The modulation bus is the hottest feature of the Pro-1 next to the sound.

The ingeniously simple sequencer provides access to two patterns, each of which can be up to 40 steps long; pauses can also be programmed. The notes are played via a connected MIDI keyboard. After the input, the patterns can be transposed with the keyboard. The Arpeggiator primarily offers the playback modes Up and Up&Down, but can also be integrated into the pattern. Synchronization to other equipment is done via the analog clock input or MIDI/USB.
Read more
coming soon $342.39
150/59(ページ1/2)の商品
1  2  »

Filter

Behringer
Release Date
Featured
Close