ダンスミュージック検索結果

Notes: The JHS Pedals 3 Series is a collection of pedals designed to give you affordability and simplicity without compromising quality. Each 3 Series pedal is made by us in Kansas City, MO, using high-quality parts, quality control, and attention to every detail. Each pedal has three simple controls and one toggle that offer a wide range of sounds, perfect for beginners and professionals alike. The JHS 3 Series will inspire your playing and help you explore new sounds at a totally approachable price point.

In 1960, Leo Fender introduced a circuit in his Bandmaster and Vibrasonic amps called the Harmonic Tremolo. Essentially, the amp's signal was split into high frequency and low frequency components, with the output switching back and forth between the two, resulting in a dreamy effect similar to the Uni-Vibe. The 3 Series Harmonic Trem allows you to utilize Leo Fender's revolutionary effect in a package much easier to tote than a vintage amplifier. Toggle up is a great sounding amp trem, while toggle down is our take on harmonic trem effect.

Notes: With the introduction of the Manis Overdrive, Keeley pens the next chapter in the legend of the mythical Klone. The essential germanium diodes at the heart of the myth faithfully deliver the iconic tones that are as expected, but that's far from where this story ends. With additional options for switching between both clipping and bass boost modes, Manis is sure to conjure up a suitable saturation for any situation

Keeley recognises that not every guitarist relates to the sound of the original horse related pedal, so while the Manis totally nails the sound of the fabled original, it also delivers a worthwhile evolution of this renowned circuit. By using GE Transistors as opposed to the fabled GE diodes, the result is representative of the same well-known flavour, but due to the different cutoff voltage there is increased saturation, compression and sustain.

The additional "tube like" second order harmonics and extra gain on tap are like a miracle cure for anyone with the "Klone blues".

Toggle the clipping switch to swap in cold-war era GE transistors for more sustain, saturation, and tube-like response that you can really feel under your fingertips. Or leave the pedal in Diode mode for that authentic Klone experience. Control the character and punch of your sound by dialing down the upper-mid honk with the Tone knob.



Need more low-end? A dedicated bass boost switch lowers the cutoff an octave and adds 3dB of gain, ideal for single coil low-end recovery.

Manis is built tough and uniquely capable of running on 18V for more headroom, a true first of its kind. Being a modernised voltage-double hard clipping boost, Manis is a one stop solution for clean boost amp saturation, sure to please Klone purists, newcomers or converts alike.

Notes: MG-300 mkII builds on the huge success of the original MG-300 compact multi-effects pedal, with a larger display and upgraded sections for Drive, Amp Simulation, I.R cabinet simulation, Modulation, Delays & Reverbs.

Audio modelling uses the new TSAC-HD algorithm, bringing pro-level amp emulations to this minimalist format. An expression pedal now has a physical toe switch and is self-calibrating, whilst the order of processing blocks are also now switchable, expanding the effects possibilities even further.

All settings can be edited onboard or via USB using the downloadable PC/Mac Quicktone software and then stored into one of 36 internal memory locations, with a new feature of 3 Pro Scenes within each preset. For live or rehearsal backing, the built-in Jam function has a fully featured drum machine and phrase looper.

To integrate with a DAW studio suite, the USB-C connection also functions as a high quality audio interface, completing the studio-ready guitar rig. The main output has options for guitar amplifiers, D.I. to mixer or headphones or with loopback for interactive online streaming.

Keeping all the elements that made MG-300 so popular, the mkII includes new features and high-end processing that are now accessible in a compact all-in-one unit.

Notes: Solid Studio mkII is a completely redesigned version of the original Solid Studio amp & speaker emulation pedal. Now with a large full colour display and data entry dial, this new concept is hugely flexible with menu-driven editing and deep parameter control.

Connect a guitar directly to the input to take advantage of the inbuilt amp models or alternatively, the Solid Studio mkII can be set to connect between a guitar amplifier and speaker, using the natural tone of your own amp into any of the speaker emulations before sending to the PA or FRFR speaker. Four main blocks deal with Amplifier, dual independent Speaker emulation, EQ and Ambience. Solid Studio mkII employs the proprietary TSAC-4K high-definition algorithm for true-to-life models of classic amplifiers, cabinets and microphones from the built-in and imported user I.R. profiles.

The EQ section provides powerful global tone sculpting whilst the Ambience section provides time-based spatial effects, necessary for adding breadth and dimension to the emulated tones. In addition to onboard editing, the Solid Studio mkII may be connected to a PC via USB-C and programmed using the free-to-download Solid Studio mkII software or mobile application. Mix and match preamp and power amp types with 2 sets of speaker and mic combinations saved to internal memory and recall them at the click of a footswitch. A unique and comprehensive tool for live and recording duties.

Notes: Since its release in 2019, OBNE's Signal Blender has become an indispensable tool for musicians looking to
create parallel signal chains, or otherwise split or combine multiple signals. Now, in collaboration with 29 Pedals, the new Signal Blender Stereo boasts many worthwhile and useful upgrades from the original version.

When 29 Pedals approached OBNE about improving the signal headroom and phase response of the original version for use in their own studio, a collaboration was born. Not content with only signal improvements, the team approached the whole new design in stereo, added trails switching and also added MIDI switching for integration into more complex rigs.


Signal Blender Stereo is a comprehensive mono or stereo parallel effects chain creator. From the input, your signal forks out into multiple paths, allowing parallel blending of two effects loops (A and B) and the original input (Clean) at the output. Experience the joys of parallel routing, or expand to other use cases, like splitting a signal to three separate outputs, or combining three unique signals into one output.

The simple, yet fully featured control set allows for grab-and-go utilitarianism.

The A and B switches engage their relevant effects loop. Tap it to latch the on/off state, or hold it for momentary action. Signal is sent at full strength through the Send jack and the volume knob determines the amount of signal coming back into Signal Blender Stereo via the Return jack. The phase invert toggle allows phase inversion on the return when the toggle is in the up position, accounting for pedals that flip the phase. The trails toggle in the up position prevents the Return from switching off, allowing time-based effects to trail after the footswitch is switched off.

In the down position, the send and return are switched on and off together.

The Clean footswitch determines whether the original clean input signal is sent to the main output and the Clean volume knob determines the volume of that signal when engaged.

By default, Signal Blender is designed to be stereo through the use of TRS cables, or mono through the use of TS cables, without the need to change any settings at all on the device. However, if mono input to stereo output is desired, just use the internal dipswitch to assign mono-in-stereo-out ("MISO"), then use a TS cable at the input and TRS cables everywhere else.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Enlightening

Elevating the groundbreaking optical compression of the original Philosopher's Tone to a new plane of tonal enlightenment, the Philosopher's Tone 2 is a world-class compressor/sustainer with footswitchable Grit, allowing for more versatility than ever before. Featuring a refined implementation of the overdrive circuit first heard in the limited-edition Gold version of this iconic compressor pedal, the unique germanium distortion found in the Philosopher's Tone 2 delivers smooth top end and rich midrange response, tailored to perfectly match the characteristics of the optical sustainer driving it. In addition to Volume and Sustain controls, the Philosopher's Tone 2 features a parallel clean Blend knob that allows musicians to mix their instrument's original tone with the compressor/sustainer effect when the Grit circuit is bypassed. This mixing technique restores natural pick-attack and allows clean settings with extreme sustain to remain dynamic and musical. When the Grit circuit is engaged, the Blend knob is automatically bypassed, circumventing the compromises of the original unit and imparting a colourful distortion to your sound in both Germanium and Silicon modes. This nonlinear diode-clipping can range from subtle overdrive to overflowing distortion, all without unwanted feedback. A Treble control located just before the master Volume provides 6db of cut or boost at 2kHz for fine-tuning the frequency response of the effect. The Philosopher's Tone 2 features true-bypass switching and internal 18V power rails for maximum clean headroom that is ideal for use with hot pickups, active bass, synthesisers and other line-level sources. Runs on 9VDC.

Knob-by-knob

Volume: Sets the overall output volume.
Treble: Boosts or cuts treble at 2kHz.
Sustain: Sets the amount of sustain.
Blend: Mixes your compressed effect with your clean signal. Note: This control is only active when the Grit footswitch is turned OFF.
Grit: Controls the gain of the overdrive stage. Note: This control is only active when the Grit footswitch is turned ON.

Rare design

Generations of guitar players have sought noiseless clean sustain from a compressor, and this was the guiding goal of the research and design behind Philosopher's Tone, yielding a compressor with an internal 18 volts of headroom and naturally musical tone control.

The evolution of Philosopher's Tone

First released in 2009 and igniting a new following for Pigtronix, the Philosopher's Tone 2 is a "best of" design, incorporating the best elements of previous iterations plus a completely redefined Grit knob for significantly more versatility.

Modern-day alchemy

Practitioners of the mystical and ancient art of alchemy long sought an element called the Philosopher's Stone. They believed, if found, it could turn lead into gold and bestow immortality upon the person who wielded it. Philosopher's Tone 2 allows players to conjure gleaming sustain, soaring lead tones, and articulation across all six strings.

Model name: Philosopher's Tone
Function: Optical Compressor Sustainer
Category 1: Compression
Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 150ohms

Body
Length (inches): 1.5
Width (inches): 3.75
Height (inches): 1.75
Weight (lbs): 0.5

Notes: In early 2023, Jamie Stillman was invited by legendary guitarist and producer Dave Catching to record at Rancho De La Luna for an album celebrating the studio's 30th anniversary. Dave- founding member of earthlings? and Eagles Of Death Metal and Queens Of The Stone Age- has been a longtime supporter of Earthquaker Devices. Jamie eagerly joined the session, using the Dirt Transmitter on many tracks to great response from the crew.

Following the session, plans emerged to reissue the Dirt Transmitter in conjunction with the album. Dave suggested Ohio-based artist Mike Egan for special Rancho-themed artwork- an ideal match, as Mike lives near EQD's headquarters. The collaboration came together naturally.

The Dirt Transmitter, one of EQD's earliest circuits, debuted in 2008. Fuzz Face-inspired and built around rare low-gain silicon transistors, it blends germanium warmth with silicon's gritty top-end. Originally released with Fuzz, Tone and Level controls, it alter added am externa. Bias control to starve voltage and create a gated, sputtery velctro fuzz. Discontinued in 2017, it returns now for a special release.

The Dirt Transmitter- Rancho De La Luna Limited Edition.

Notes: The Four to One Mixer is the final docking station for all of your diverging sonic journeys! A simple and compact 4 channel mixer with independent level controls and selectable phase for each channel. This was primarily designed to be used with the One to Four Splitter to create 4 parallel signal paths, but it can be used just about anywhere you need to mix four different sources into a single output with your unique sound!

This high headroom device features a high 1 M Ohm input impedance and a low 100 ohm output impedance ensuring all signals maintain their sonic integrity throughout their journey, even on long cable runs. The high headroom input impedance of this device allows it to accept a variety of instruments without distortion or clipping. This was built to handle just about anything, including guitars, basses, synthesizers, drum machines, and more!

Phase selector switches for each channel will make sure to correct any issues you might have from mixing multiple different signals with opposing polarities. Sometimes mixes can sound out-of-phase, leaving the resulting signal sounding thin or tinnier. Adjusting the Phase on the Four to One Mixer will help you avoid these issues. When used in conjunction with the Four to One Splitter or the Flexi Loops, you can create wild parallel signal paths at the flip of a switch! Use it to mix 4 instruments into one amp! Run four synths into a single channel! Put the whole band through your wall of amps! The possibilities are still nearly endless.

Phase: Use this to select the output phase of the channel. Sometimes other pedals and various instruments will invert the phase of the signal which causes major problems when mixing with other non-inverted signals. If you have a signal that is inverted, flip the phase switch to "-" and the polarity will be corrected. In most cases this switch should stay in the "+" position.

Level: Adjusts the output volume of the channel.

Dimensions

4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw

50 mA

Input Impedance

1 MO

Output Impedance

100 O

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. EQD always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Notes: The concept for Diamond Pedals' Boost/EQ began in the early 2000s, with a request for a 'compression-less' version of the famed Diamond Compressor - combining a clean boost circuit with the Compressor's Tilt EQ.

Nearly 20 years after the resulting original pedal's launch, we've re-imagined this idea on the same platform as the Comp/EQ. Introducing the next-generation Diamond Boost/EQ. This versatile, low-noise pedal delivers a punchy, dynamic sound that's ideal for any set-up

Taking the lively, high-fidelity gain stages of the Comp/EQ, the Boost/EQ offers plenty of punch while maintaining clarity and transparency. While the Tilt and Mid controls give you complete freedom to sculpt your tone. Need more sparkle? Dial it in with the Tilt knob. Looking for a midrange boost to cut through your solos? The Mid control has you covered. Want to make your Marshall tone a bit more Fenderesque? It's all possible with Diamond's Boost/EQ.

In addition, the Boost/EQ features a second mode that provides a low-gain overdrive - transparent, yet full of character. This makes the Boost/EQ the ultimate Swiss Army knife for your pedalboard, combining clean boost, tone shaping and overdrive, into one powerful and versatile pedal.

The Boost/EO offers 2 distinct modes of operation. The first is a clean boost mode designed to increase the output of your signal enabling you to beef-up low-output pickups, drive tube amps and dirt pedals for increased sustain and saturation or simply have your solos jump out in the mix.

Set to the OD mode, the gain structure of the pedal is modified and soft clipping diodes are added to the circuit. This provides smooth, transparent, musical distortion that ranges from just a touch of hair and harmonic overtones, to a nice low to mid gain overdrive. Depending on where your Boost/EO is placed in your signal chain, it will either deliver an increase in volume or distortion/saturation. Place it at the end of your pedal chain or in an amp's series FX loop for a volume boost. Put it in front of your drives and fuzzes for more gain and distortion.

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


The classic Pantheon pedal gets even better with this Deluxe version. Two independent overdrive circuits give you classic Blues Breaker-style tone plus modern boutique sounds.

Supplier's Notes:
The now legendary Wampler Pantheon provided a unique interpretation of the classic "Blues Breaker" style stomp box, by capturing all the tonal nuance of the original, but with added flexibility and style. In doing so, it found its way onto thousands of pedalboards across the world. Enter the new Pantheon Deluxe - a dual overdrive pedal that takes this evolution several steps further by offering a flexible design with two completely independent Pantheon circuits, one voiced as a classic blues breaker and one with a more modern boutique sound. This palace of tone delivers a staggering 200 combinations of gain settings, featuring dual Inputs and Outputs, and for the first time ever, Wampler have added MIDI channel switching to one of their gain pedals.

The Pantheon Deluxe lets you dial in two channels of organic creamy gain, gritty overdrive, or heavy distortion while retaining Wampler's famous ease of use and flexibility. Channel 1 delivers a classic Blues Breaker tone, Channel 2 is a recreation of the original Pantheon, a similar circuit to the Blues Breaker but with a modern boutique feel. Independent side mounted Voicing and Gain Level switches allow you to further shape your tone to perfection.

DOUBLE UP

The Pantheon Deluxe lets you dial in two channels of organic creamy gain, gritty overdrive, or heavy distortion while retaining Wampler's famous ease of use and flexibility. Channel 1 delivers a classic Blues Breaker tone, Channel 2 is a recreation of the original Pantheon, a similar circuit to the Blues Breaker but with a modern boutique feel.

ALWAYS THE RIGHT FIT

Each Channel of the Pantheon Deluxe Dual Overdrive feature independent Gain, Level, Treble, and Bass controls to enhance the shaping of your tone. The Baxandall-style active Bass control is neutral at noon but boasts an extremely powerful sweep as you move through the range. A single global Presence control simultaneously alters each channel to add just the right amount of top-end chime to suit different guitars and amplifiers - perfect for when playing live or when in the studio.

MAXIMUM CONNECTIVITY

With the addition of MIDI In and Out, you can now also switch the analog channels of each circuit on and off with a MIDI switcher - saving you valuable hardware loops on your loop switcher. With dual analog inputs and outputs, you can split both channels in a loop switcher, insert pedals between each side, or run in stereo.

BUILT FOR FOREVER

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Pantheon Overdrive. We're all tone-freaks, and we're always trying new things, but we hope this pedal finds its forever home on your pedalboard, so we built it to last that long.

TECHNICAL DETAILS

Built in the U.S.A
Dual Independent drive channels using Brian Wampler's classic Pantheon circuits; Channel 1 Classic Blues Breaker voicing, Channel 2 Modern Boutique voicing.
Independent Volume, Gain, Treble and Bass controls for both channels, global Presence control, front mounted Channel Order Switch, side mounted independent Gain Level and Voicing switches, MIDI In and Out (3.5mm TRS) and 2 sets of input and output jacks.
Top-mounted jacks make pedalboard placement effortless
Power draw: 55mA
9-18V power jack: DC supply only, do not exceed 18V DC, battery Included.
Includes Wampler's limited 5-year warranty
5" x 4.5" x 1.5" (88.9mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Envelope with filter with serious attitude

This mangled, filter-sweeping, abruptly overdriving pedal is designed to respond to your playing. It syncs its wave-thumping movement with the force at which you play. It multiplies dynamics into a hyper-exaggerated frenzy. It adds just the right amount of movement to punch through the mix and it reacts to an external trigger of your choosing to follow your tempo. Six selectable frequency ranges mean you're always gonna have just the right quack and oomph for whatever's plugged in! The sounds are wild, the thump is thick, and the animation is deep.

Controls

Input: Plug an instrument in to this jack.
Trig: Plug another instrument in to this jack and use it to trigger the filter sweep.
Out: Connect this to the amplifier.
Sensitivity: Determines the point at which the filter engages and the frequency range of the filter shift in relation to the input amplitude.
Intensity: Simultaneously blends in the resonance, amount, and grit of the filter.
Vol: Adjusts the output volume of the DEEP ANIMATION.
Frequency Selector: Selects the frequency range of the filter.
Bypass: True bypass the effect.
Up / Down: Controls the polarity of the filter decay once triggered. UP sweeps the frequency from higher frequencies to lower ones and DOWN, the opposite.
Additional Features: There is a subtle light to indicate the external trigger behind the main bypass LED.

Specifications

Dimensions: 5.92" x 4.72" x 2.34" (including hardware).
Weight: 21 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 18 mA.

Notes: Make your music Hypersonic

Send your tone soaring with the HyperSonic 3-octave pitch rise.

New octaver blend modes

Create never-before-heard sonic textures with new octaver blend modes.

MIDI-capable

Ready to integrate with advanced performance rigs with support for 5-pin MIDI control.

Artist-inspired design

Unique artwork and signature style make the MonoNeon Signature Whammy a bold addition to your pedalboard.

The DigiTech MonoNeon Whammy pedal goes where no whammy pedal has gone before, with new octave blend modes and up to 3 octaves of HyperSonic pitch shifting. Developed in collaboration with trailblazing bassist MonoNeon, the MonoNeon Whammy delivers mind-blowing pitch manipulation for guitar and bass alike.

Included in the box:
MonoNeon Whammy Pedal
Power Supply
User's Manual
2 Guitar Case Stickers
Warranty Registration Information Card
Special MonoNeon Customizing Kit

> Gaffer's Tape - Neon Yellow & Neon Orange
> Mini Permanent Marker

Specifications

Input / Output
Instrument Input Type: Unbalanced 1/4" TS phone jack
Max Input Level: +5 dBu
Input Impedance: 1 MO
MIDI Input: 5-Pin DIN
Output Type: Unbalanced 1/4" TS phone jack
Max Output Level: +10 dBu
Output Impedance: 1 kO

Electronics

Frequency Response: 20 Hz to 20 kHz
Signal to Noise Ratio: >105 dB (A-weighted): ref = max level, 22 kHz bandwidth
THD: 0.004% @ 1 kHz; ref =1 dBu w/ unity gain
Sample Rate: 44.1 kHz
A/D Conversion: 24-bit
D/A Conversion: 24-bit

Physical

Dimensions: 6.5" (16.51cm) x 7.75" (19.68cm) x 2.5" (6.35cm) (WxDxH)
Shipping Weight: 3.8 lbs. (1720g)

Power
Power Consumption: 2.4 W (265 mA @ 9VDC)
Power Requirements: 9 VDC External Adapter (center negative)
Included Power Adapter: PS0913DC (9V DC @ 1.3 A) center negative

Notes: COSMOS is a drifting memory station designed to work with meditative states through music. The design of the controls, functions and generated soundscapes are intended to evoke, in both performer and listener, states and experiences inherent in meditation, such as limitless space, fluidity, spontaneous development, presence, the ability to hear, tranquility, the experience of subtle harmony and happiness enveloping the whole world.

From a functional point of view, COSMOS is a large array of sound memory, in which recorded sounds undergo constant recombinations, spontaneously generating an ever-changing soundscape. This is achieved in three ways - by a mathematical shift based on the relationships between large prime numbers (the size of all delay lines are different primes), an asynchronous operation of the LFO, and modulation with a slowly changing chaotic signal. As a result, it allows the endless layering and processing of various sounds, as in a looper, but without an intrusive, repetitive loop.

COSMOS generates rich, fluid and evolving soundscapes perfect for ambient music. Using COSMOS, you can play an entire meditative solo concert while being in a spontaneous flow and without using studio-prepared sequences, backing tracks and other things that can't be a reflection of the "here and now".

Notes: The first outing for KMA's unique and custom AI driven True Double Tracker technology was in the ENDGAME, their powerhouse end-of-chain pedal. KMA designed their dead-simple-to-use, TDT Algorithm in ENDGAME to be as authentic to the doubling recording process as possible, but they realise that not everybody needs all the bells and whistles of such an all-encompassing device.

However, the processing power requirements required for TDT meant a simpler device wasn't yet possible. But as demand from the community grew, KMA's team worked hard to squeeze it down and make it happen.

So, meet GEMINUS - all of KMA's True Double Tracker goodness in a compact pedal that's suitable for any board. Whether playing live or recording with a single instrument, GEMINUS is the perfect solution for adding "fatness" and "width" to your performances - it really does feel like you are playing the same riff twice!


Enabled via the soft bypass footswitch, GEMINUS accurately replicates the minor differences that exist between two separate recordings. The TDT WIDTH control spreads your doubled tracks, anywhere from completely centred (0%) to 50% left and right (centre indent) and 100% left and right split.



KMA has carried out extensive research on how to make double tracking sound exactly how they think it should perform. In the process, they've spent thousands of engineering hours working on our own proprietary technology, even developing their own custom neural network AI with onset detection in the process for our algorithms.

The mode for the TRS input and output jacks is selected by the toggle switch. You can choose between stereo in and out, mono in and stereo out or mono in to mono out, so no matter your signal and tonal desires, GEMINUS will fit into your rig with ease.

For the most accurate performance (and just like the real double tracking scenario in the studio), their custom True Double Tracker algorithm should ideally be fed with a mono signal. Obviously if you are trying to emulate what traditionally happens in the studio, you wouldn't normally double up a stereo source. Having said that, the TDT algorithm has been optimised to still have a useful and very pleasing widening effect on stereo input signals, just take care that using too much doubling on some stereo sources may cause your carefully crafted reverb, delay or other modulation effects to turn to mush or even add phase issues.

To help tailor the Doubling to your own taste, the TIME control changes the timing range of the doubled AI-driven onset detection. Essentially, it's all about the tightness of the doubled signal to fit differing playing styles. Variable from an extra tight mode, that's perfect for extra fast riffs, to a looser timing that can just the right amount of density to more open playing styles, this control is a powerful weapon to make your riffs fit your musical goals. The centre detent is GEMINUS' default factory position, but turning the knob left will give a tighter feel. Crank the knob to the right and the doubled signal becomes much more relaxed.


While the LEVEL control affects the balance of the doubled signal against the original source. Useful for those times where you might want maximum width, but a little less (or even more) of the sound to be doubled against the original. Centre detent of the knob is GEMINUS' default factory position. There's some clever panning stuff going on under the hood here too, so neither the doubled or original signal is louder on one side or the other, when in Stereo.

Finally, the new PITCH selector switch can add some additional movement to your doubled signal, extending the usefulness of GEMINUS beyond standard doubling. When the switch is at the centre default position (-) there is no pitch adjustment, (~) adds some subtle modulation, while (?) adds even more wobble. In this mode, it doesn't mean that your second guitarist will sound like they are off on a quest for enlightenment all on their own (!), it is just super handy for those times when you want more chaos and instability in your ensemble.

To top it all off, they've added a switchable real True/Buffered bypass and 'silent' relay-based soft switching. When KMA were testing our new pedal platform, they really loved the clarity and signal integrity of KMA's Buffered Bypass, plus there are zero clicks and pops when switching in this mode, which is why it is the recommended and default mode on shipping. However, they know some players have some special devices like extra fussy vintage fuzz pedals and the like, so they added the ability to select True Bypass mode via an internal dip switch.

Phew, seems that there's quite a lot going inside GEMINUS then. We believe our True Double-Tracker in this pedal is the best sounding, yet easiest to use doubler you'll ever play - period.


Go forth and multiply your riffs!


Product Type:

Stereo True-Double-Tracker (Proprietary Doubler) pedal

Bypass Type:

Switchable True/Buffered Bypass with 'silent' relay-based soft switching

Power Supply Requirements:

9 V DC - Centre (-) negative 2.1mm

Current Draw (max):

< 100 mA

Product Dimensions / Weight:

H: 60 mm / 2.36 inch
W: 74 mm / 2.91 inch
D: 128 mm / 5.04 inch
Weight: 350 g / 12.35 ounces

Notes: When Wampler decides to jump into the multiFX market, they do it in style. 11 custom designed effects blocks, from Flanger to Phaser, Chorus to U-Vibe, Harmonic Tremolo to Envelope Filter, you know everything about it is going to be perfect.

In one incredibly small package, you can control any of the 8 presets via midi, you can assign an expression pedal to control ANY of the main five controls, you can run it in full glorious stereo or keep it in mono - you can even split that mono signal to route some effects to go before your drive pedals, or amp gain, and have the rest follow behind or in your effects loop!

When you put the Terraform into your rig, you know that not only will you get that legendary Wampler tone, but you will get the most easy to use, hugely versatile and best sounding collection of modulations you could ever want.

Each of the 11 effect blocks have been designed and realized in-house by the tone chasing freaks at Wampler. Each one has been inspired by many individual stomps, both modern and vintage, to bring you the best version of them all.

There are 8 presets to store your favorite sounds - you can recall them via the fully mappable midi, via the button on the front and even from the stomps! The expression pedal can control ANY of the 5 controls and you can even set the heel and toe point!

If you want true Stereo, you got it - You want basic mono, you got it.. You can even split that mono signal so you can put some effects in front of your drive section and the others behind, or going into the front of your amp with the rest in the effects loop. However you like to route your signal, the Terraform has you covered.

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Terraform. We're all tone-freaks, and we're always trying new things, but Wampler hope this pedal finds it's forever home on your pedalboard, so it was built to last that long.

Technical Details

Built in the U.S.A.
High grade components picked for their superior sound and response
Relay true bypass with soft switch (buffered bypass in trails mode)
Top mounted input and output jacks 9v power jack
Power draw: 64mA (at 9v) and 68mA (at 18v)
Allows for you to use reverb and two delays simultaneously
Maximum 1 second delay
Second delay can be layered on top in 3 different patterns
Relay True/Buffered Bypass
Includes Wampler's limited 5-year warranty
2.50" x 4.50" x 1.5" (63.5mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: How many times have you sat in front of your favorite ambient pedal and felt like you need weeks of training at NASA to use it? Knobs, switches, sliders - It's often SO hard and frustrating to find a usable tone on those things quickly - Keeping that firmly in mind, when Wampler first considered making an ambient pedal, ease of use was a top priority, right up there with top tier quality tone on par with pedals at twice the price.

How do you describe a pedal like the Wampler Ethereal? Does ambient heaven cover it? Is it the gateway between real life and the astral plane? Or is it just gorgeous? It's hard to know which phrase to use when talking about it, because they all match it perfectly - plus, of course, so easy to use you'll be getting those perfectly Ethereal tones instantly.

When designing the Ethereal these were the EXACT thoughts running through the mind of Brian Wampler. He wanted to make a delay that is as pure as you could want, with a time of up to 1s, a reverb that is thick and then have the option to mix them all up and put them together in one glorious effect that will send you away - all the way away while making it as easy to use and easy to find those perfect tones as possible.

It's been a bit of a secret, there isn't one delay lurking within the Ethereal, there are two! The first delay constantly sits there like a heartbeat, coming back at you at quarter notes, Wampler then layer another over the top - that one can be put into a triplet pattern, or a dotted 8th (so you can get that beautiful quarter + dotted 8th mix) and even a self-oscillating dotted eighth pattern that just takes you away and leads you over the edge and down the rabbit hole into perfect ambience - Things can get a little crazy when that one is selected, so you know, knock yourself out - it's there to make some incredibly strange yet beautiful sounds - See that little switch down there? Yep, that's the one, just to the right of the stomp - that's a trails button. When this is used the delay patterns and reverbs sing out after the pedal has been deactivated, so you can even control what you want to come back at you.

While you are enjoying the delay patterns, sitting underneath is that beautifully cavernous plate style reverb that is alive with character and shape, that can be brought in to exactly the right level (whether that be under your guitar, the same level - unity, or even considerably louder) to compliment the delay.

As you can imagine, this has been some feat of engineering (definitely worth waiting for) as we wanted all this to happen from a regular sized box, with the purity of tone and response you would expect from a Wampler. So, as with our other time pedals, we split the signal going in, the effected signal is then laid back on top of the original base tone, making sure that YOUR guitar sounds exactly how it does going in.

The Wampler Ethereal. Not only can it be used a stand alone reverb or delay pedal, it can be combined for you to worship, to get lost in, to even help you inspect your shoes - but most of all, it was designed to inspire.

Technical Details

Built in the U.S.A.
High grade components picked for their superior sound and response
Relay true bypass with soft switch (buffered bypass in trails mode)
Top mounted input and output jacks 9v power jack
Power draw: 64mA (at 9v) and 68mA (at 18v)
Allows for you to use reverb and two delays simultaneously
Maximum 1 second delay
Second delay can be layered on top in 3 different patterns
Relay True/Buffered Bypass
Includes Wampler's limited 5-year warranty
2.50" x 4.50" x 1.5" (63.5mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: The Faux Spring Reverb has been a staple on many players boards for many years now, and when it was discontinued a few years ago Brian Wampler received numerous requests to bring it back since then. Not being one to be content with just reissuing something, Brian decided to take all of the feedback from players he had received and give it a bit if an upgrade.

The result was the birth of the Mini Faux Spring Reverb. Following the idea of - If it's not broke, don't fix it - he just added more of what players love. More decay, more drippiness and more of that bouncy spring tone players love in the bigger Reverb tanks. Despite sounding bigger and fuller, he decided to condense it down into a mini enclosure to fit perfectly at the end if any chain to grab and go.

When the moment calls for the sound of spring reverb, you'll be glad you have this little guy. With an extended decay time, the Mini Faux Spring Reverb pedal serves up authentic tones that drip with boing (Don't you love spring reverb adjectives?) just like a great spring tank. And thanks to an easy-to-navigate control layout, you'll have your perfect tone pulled up in no time.

For years, the Wampler Faux Spring Reverb was the very best spring reverb pedal available, Brian Wampler updated it, made it smaller, made it bouncier - made it even more perfect for your rig!

There no denying the popularity and convenience of this pedal's mini design. Not only does it fit wonderfully on even the most cramped pedalboards, but it's easy to throw in the back of your open-back combo when running in the amp's effects loop.

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Mini Faux Spring Reverb. We're all tone-freaks, and we're always trying new things, but we hope this pedal finds it's forever home on your pedalboard, so we built it to last that long.

Technical Details

Built in the U.S.A.
High-grade components picked for their superior sound and response
True bypass Small profile, ideal for pedal board placement
Signal is split, core tone is unchanged through the pedal, the effect is laid on top of your tone
Volume, Depth, and Tone control allowing you full control of your reverb trail
9v power jack (no battery connector inside)
3PDT True Bypass
Includes Wampler's limited 5-year warranty
Power draw: 64.3mA (at 9v) and 69.5mA (at 12v)
1.50" x 3.50" x 1.5" (38.1mm x 88.9mm x 38.1mm) - height excludes knobs and switches

Notes: Empress have brought back the most sought after Parametric EQ pedal with groundbreaking updates.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

We're able to offer the most control without degradation to the tone due to minimal circuit topology0 the opposite of graphic EQs.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Baxandall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Why Parametric over Graphic EQ?

Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The ParaEq MKII Deluxe excels in precision and transparency compared to a standard 7-band graphic EQ pedal. When both are set to provide a boost, the ParaEq MKII Deluxe offers a much more focused adjustment, affecting only the targeted frequencies. In contrast, the graphic EQ alters a broader range of the frequency spectrum. Moreover, while the ParaEq keeps the rest of the signal unchanged, the graphic EQ can unintentionally reduce other parts of the signal. This makes the ParaEq MKII Deluxe a more transparent and accurate tool for shaping your sound.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 4.8"
Width: 2.6"
Weight: 1 lb

Notes: An original creative take on delays, looping, reverb and modulation, the Technician combines various digital programs to create a hugely versatile all-round audio tweaking toolbox.

Supplier's Notes:
Delay modes

Digital

Starting as a crisp digital delay, this mode, when paired with the tap footswitch, covers a lot of ground for your delay needs. The "Red" modulator lets you adjust the dampening of the delay, making the repeats either brighter (emulating towards a tape or HIFI sound) or darker

Reverse

Instead of reading the delay buffer in a forward direction like the "Digital" delay we read the buffer backwards creating unique sound possibilities. You can further modify this sound with the "Red" modulator to adjust the dampening of the repeats to grow brighter or darker.

Granular

Takes the delay buffer and chops it up into "Grains" and then plays those grains back. The size of the grains, direction (forward/reverse), the speed (pitch) and location in the buffer is all randomized so every time you experience this mode it will be a unique exploration into granular synthesis. The "Red" modulator allows you to adjust the max size of the randomized "size" of the grains and the amount of grains from 1-5.

Re-sample

What if you want a more complex soundscape like other instruments are playing with you? Re-sample accomplishes this by playing the delay buffer at different speeds which changes the pitch and timing of the delayed phrases creating a more complex musical expression of what you are playing. "Red" lets you adjust the mix of the octave down and the octave up.

Reverb modes

Hall

The least diffused of the reverb modes "Hall" allows you hear the reflective nature of the hallway your sound is in.

Plate

Emulating a classic plate reverb sound that is diffuse and reflective.

Chasm

An exploration into reverb design feedback networks that can allow for unnaturally large decay lengths.

Grim

Takes the "Chasm" mode and splits the output to a parallel octave down so you get the normal output + the octave down for a deep rich soundscape.

Looper modes

Gives you latching control over the rec/dub of your looper.

Momentary

Only rec/dub while holding the rec/dub switch.

Quantise

Works like the latching but will trim your loop to a division of the existing delay time.

MOD ONE and MOD TWO allow you adjust the following modulators

Modulators

Delay

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Reverb

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Looper

Clock: fine detail adjustment of the speed and direction of the clock.
Quantized Clock: Quantized adjustment of the speed and direction of the clock locked to octave intervals.
Loop Start: Adjust the starting point of the loop.
Loop End: Adjust where the loop will end.

MIDI: 3.5MM IN/OUT
USB: USB-C
Expression: TRS input

Controls

MIX (mod one)- The mix of the Reverb DSP block
DECAY (mod two)- The time it takes for your instruments reverberations to fade away, or die.
FEEDBACK (mod two)- How many repeats the delay will have
MIX (mod one)- The mix of the Delay DSP block
CLOCK (pre-delay)- Adjusts the "size" of the reverb DSP block
MIX (mod one)- The mix of the Looper DSP block
FREQUENCY (resonance)- Adjusts the Frequency of the Filter DSP block
TIME (dry mix)- Set the time of the Delay DSP block up to 2 sec

Modifiers

Reverb Mode (modulators)- Sets what Reverb Algorithm is active
Looper Mode (modulators)- Sets how you control the Looper DSP block
Tap Division (effect order)- Sets which tap division is active for the Delay DSP block. 1/2: Half note, 1/4: Quarter note, .1/8th: Dotted eighth note, 1/8th: Eighth note
Delay Mode (modulators)- Sets which Delay Algorithm is active

Input/Output: Stereo / mono - stereo / stereo - mono / parallel mono
Bypass: True Bypass / Tails
Power: 9v 400MA
Dimensions: 4.8 x 5.5
MIDI: Yes. 3.5mm Jack
USB: Yes
Jacks: Top Mounted Input And Output Jacks

Notes: The Oceans Abyss expands on Electro-Harmonix's highly acclaimed reverb technology to deliver a truly immersive effects workstation. The pedal is centered around dual reverb engines that are independently programmable with full-stereo algorithms including Hall, Spring, Shimmer and more. Place these reverbs into a customizable signal path with additional FX blocks like Delay, Chorus, Tremolo, or Bit Crusher for a completely unique soundscape building experience.

Electro-Harmonix has paved the way for powerful, accessible reverbs since the release of the original Holy Grail and now we've pushed the envelope deeper with the fully-equipped Oceans Abyss. Featuring a customizable signal path with up to 8 effects blocks, the Oceans Abyss can be configured as individual reverb, modulation, EQ, delay, bit crusher, saturation or volume effects, or as countless combinations for incredibly creative effect shaping. From a simple Spring reverb to a lush stereo field featuring stereo hall and shimmer reverbs, chorus, delay, overdrive, and tremolo, you can go from surf to shoegaze instantly, without breaking a sweat.

Deep parameter editing is accessible via the high-visibility OLED display with multiple graphical views and easy-to-read designs. Expression/CV control over nearly every parameter gives artful control of your effects and dynamics. Fully-stereo I/O plus an FX Loop allows for use with any instrument, recording set up, or live rig. 128 programmable presets via onboard footswitching or MIDI ensure perfect recall in all performance situations. MIDI IN/OUT ports with MIDI IN support of PC, CC, and Tempo Clock expand the already immense talents of the Oceans Abyss. Connect with UBS-C to Windows or Mac for effects editing, preset management, and more with the free EHXport app.

Circuit: Digital
Bypass: Buffered Bypass
Audio: Stereo In & Out
Power Supply: 9.6VDC-500mA power adapter included
Dimensions (in): 7.125 x 5.75 x 2.25
Current Draw: 500mA

Notes: MESS is a pedal that opens up a new world of possibilities. MESS blends traditional sound shaping with generative and performance power with four independent effect tracks can befreely assigned to over 120 studio-quality effects, all with sequenceable control over multiple parameters. Start a sequence and create entirely new textures that evolve in time - from lush ambient washes to glitchy chaos. Or switch off the sequencer and use MESS as a powerful, traditional multi-effects pedal.

Mess features 120 high-quality, stereo effects, ranging from traditional to the experimental. Choose from analog-style modulation and time-based staples or innovative spectralizers andnew ways to use granular engines.

MESS's 16-step grid pad is a real time sequencer and editor - with intuitive hands-on control that rewards experimentation without an advanced degree in sound design required. Sequence effect parameters, start or stop sequences without cutting out the effects, or build complex
polyrhythmic patterns that evolve as you play.

Each track runs independently, with detailed control over parameters, time divisions and length .Create slow spectral sweeps by slowing a sequencer down to 1/16th of the chosen tempo while increasing the speed of a microlooper for chaotic glitchy stutters all in the same patch. MESS has the tools to build-up textures or tear them apart.

MESS turns effects into an instrument. Unlike conventional multi-effects units that rely on staticpresets, MESS offers dynamic, programmable, and performative sound design. This effectspowerhouse is equally at home on pedalboards, in modular synth setups, or integrated intoDAW-less setups making it ideal for guitarists, synthesists, drum machine enthusiasts, and sound designers.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


E7 is the MOOER Polyphonic Guitar Synth Pedal is the second pedal of MOOER New Micro series. As a brand-new design Micro series, we have added 7 LED indicators on the right side of the shell, providing more possibility to the New Micro series.
E7 can transform your guitar into a typical electronic synthesizer, without the need for special pickups or instrument modifications. It is named as E7, for its seven different MOOER custom synthesizer tones. Each tone with an individual arpeggiator, high/low frequency cut, attack, speed function, allow users to shape the tone in their mind easily, explore the horizon of tone with the E7.

Features:
*7 different types of brand-new MOOER SYNTH tones
*Individual Arpeggiator for each tone
*7 slots for storing users' presets
*Firmware upgradeable via USB

Specifications:
*Input: 1/4" mono jack (impedance 2.2M Ohms)
*Output: 1/4" mono jack (impedance 100Ohms)
*Power supply: 9V DC transformer (internal negative external), MOOER Micro Power is recommended
*Current Draw: 150mA
*Dimensions: 93.5mm(D) x 42mm(W) x 52mm(H)
*Weight: 155g
*Accessories: User Manual

Notes: CHO-mini

Compact Stereo Chorus Pedal

The pocket-sized, yet feature packed, the Nobels CHO-mini pedal combines an outstanding selection of chorus tones, all in a budget-friendly and space-saving enclosure. With a heritage of building chorus units in the past, Nobels has engineered this all new pedal to offer maximum versatility, in a super compact package.

Providing a skilfully curated selection of ageless chorus effects, CHO-mini delivers a wealth of sonic possibilities, with either a mono or spacious stereo image. The achievable tones are far beyond the
pedal's modest footprint and is an excellent addition to any type of setup.

The CHO-mini features three carefully crafted, yet distinct chorus flavours. All three modes faithfully capture those iconic modulation tones that have shaped music across genres, past and present and are simply selected by the pedal's convenient mode switch, right on the face of the pedal.

"Chorus 1"

This emulates the coveted and well-established bucket-brigade style of chorus pedal tones from the 70s. You know "THAT" Chorus sound that is instantly recognisable from many popular recordings.

"Chorus 2"

Based on a different flavour of stereo chorus, "Chorus 2" allows for a higher rate towards the end of the control range, enabling pleasing vibrato like textures.

"Flanging"

While not a flanger tone in a traditional sense, this mode emulates another extremely popular (and rare and expensive in its original form) chorus pedal from the 70s, in its subtle flanging mode. Think of this as a comb-filter phasing of the signal (like feedback on a delay), focusing on its luscious general character and without becoming too extreme.

Adding to its flexibility, the CHO-mini features full tap tempo functionality, but in a single switch design. Simply holding the footswitch for approximately two seconds enters the pedal into "Tap Tempo Mode", following which the pedal will respond to rhythmic tapping instantly. Further defying expectations based on its compact appearance, there are dedicated toggles for selection between mono and stereo (TRS) operation as well as true or buffered bypass modes, making the pedal suitable for almost any musical situation, anywhere, any time.

As with all other current Nobels pedals, the CHO-mini features 4 integrated Mounty-P Mounting Plates for safe and secure attachment to pedalboards. With its full metal enclosure and Glow in the Dark pointer knobs, the CHO-mini is a pint-sized powerhouse that's built for performance!

Product Height (cm): 5.100
Product Width (cm): 4.850
Product Depth (cm): 9.370
Product Weight (kg): 0.210

Box Height (cm): 6.540
Box Width (cm): 7.000
Box Depth (cm): 12.100
Boxed Weight (kg): 0.301

Notes: ***B-STOCK: Box opened, product in perfect working order***


Valve-based pre-amps meet cabinet simulation in this ultra-flexible pedal. Dial in your tone, patch in effects, and control the lot via MIDI or USB. A brilliant combination of analogue and digital.

Supplier's Notes:
Tsakalis is proud to release their most ambitious product to date. Seamlessly blending the authentic analogue warmth of real tubes with a highly configurable cabinet simulator, plus flexible outputs and control options, the MOTHERSHIP - Real Tube Preamp stands out as possibly the most highly featured and flexible front end for any guitar rig currently available.

The MOTHERSHIP is a complete solution for authentic vintage and modern genuine tube amp tones, in a user-friendly and lightweight, yet rugged package that is designed to slot in easily into any setup.

Both channels on the MOTHERSHIP are identical, yet highly configurable.

Featuring three gain modes (High, Medium and Low) on each channel, along with a toggle switch for selecting between your three chosen speaker simulations, the MOTHERSHIP can conjure up a multitude of both iconic, familiar and unique tones easily and intuitively. Each channel also features two master gain controls along with two master volumes, allowing four different voices to be instantly recalled, either by pressing the relevant footswitch or via MIDI command.

Demonstrating its prowess as a fully comprehensive plug and play device, the MOTHERSHIP also features over 70 free custom cabinet simulations to choose from (when connected to Tsakalis' own TAW Editor app via USB), separate dedicated simultaneous outputs for both the cabinet simulator and a "dry" output for your amp of choice, MIDI control of channel, A/B selection and bypass and also a serial mono FX loop for added tonal versatility.

Fully-featured all-analogue real tube preamp design

The MOTHERSHIP represents the perfect "amp-in-a-box" pedal, seamlessly blending a beautifully designed, real tube front end with a highly flexible cabinet modelling solution. However, it also shines as a genuine tube overdrive pedal when connected to the front of your amplifier, or when running it as the tone defining preamp section of your setup, directly into your power amp. It can also do both of these things simultaneously.

Quad channel tube preamp and drive

This preamp pedal has two completely independent channels, each featuring a four-band EQ, two different Gain/Volume sections, three selectable gain-stages and three selectable cabinet simulations, plus a serial mono effects-loop for your external effects, MIDI in and free access to Tsakalis Audioworks' full free online library of carefully selected and curated digital cabinet simulations.

The MOTHERSHIP's two independent channels were carefully designed with a real tube audio path, providing a huge range of tones from warm or sparkling cleans all the way to high gain tube driven distortion. The two ECC83 (12AX7) tubes, run at a comfortable 240 Volts, providing touch sensitivity, headroom and plenty of gain and tube sag as required.

Each channel features a four band EQ (Bass, Mid, Treble and Presence) and two different Gain and Volume controls (Gain A-Volume A / Gain B-Volume B) transforming the MOTHERSHIP into a quad channel powerhouse.

The dedicated MODE switch for each channel is responsible for the tube audio path structure, giving 3 different gain modes L = Low, M = Mid and H = High, allowing you to easily customize completely different lead and rhythm tones with different gain structures as well as a solo volume boost for each and access them on-the-fly by simply pressing the relevant footswitch.

Notes: Suitable for guitar, synths, drum machines and more, the updated Godeater refines the boutique saturation/distortion pedal, offering more precise control over low frequencies. New filter-keyed sidechain, advanced routing and MIDI integration add major flexibility.

Supplier's Notes:
The new Godeater+ is the successor to the successful Godeater pedal from Indian manufacturer Animal Factory.

The Godeater was primarily designed for electric basses and saturates the sound in the lower frequencies. However, it is not limited to bass guitars. The pedal can also be used with synthesizers or guitars. The pedal can also be interesting in combination with drum computers. The main aim of the Godeater+ is to create a pedal that allows you to create a distorted sound without losing the low frequencies.

Notes: LAPS: A Multitrack Sound Design Tool

LAPS is a compact multitrack machine designed for layering soundscapes, crafting tape-style overdubs, and creating intricate sonic collages. Ideal for everything from glitchy loops to expansive, multi-layered recordings, LAPS offers a trove of creative possibilities.

Features at a Glance:

3 tracks (Laps) with up to 20 seconds of stereo recording each at 24-bit/48kHz.

Two modes: Replica (mirrored layers for melodic shifts) and Multiply (endless layering without erasing).

Stepped pitch shifting, band-pass filters, granular effects, and a tape-style "Age" effect.

Stereo in/out with on-board panning, true bypass, and high-quality A/D/A converters.

Designed for Sound Explorers

LAPS draws inspiration from Puremagnetik's Small Winters - a plugin built in collaboration with sound artist and 12k label manager Taylor Deupree. LAPS takes the concept beyond the digital realm with enhanced features and physical functionality. Whether you're sketching loops or building spacious compositions, LAPS transforms into a powerful, hands-on sound design tool.

Notes: In 2025, MOOER has announced that it will be set to release its latest multi-effects pedal, the GS1000 Intelligent Amp Profiling Processor, an augmented intelligent amp profiling processor. Built on MOOER's advanced third-generation digital platform, the GS1000 introduces groundbreaking MNRS 2.0 technology, allowing guitarists around the world to emulate their favorite gear with immense precision -specifically, for distortion pedals, preamps, amplifier heads, and cabinets.

With this innovation, guitarists can fully capture the essence of their favorite guitar gear without owning the physical hardware, enabling them to carry their favorite tones wherever they go. Users are even able to use third-party IRs for cabinets of their choice, further enhancing the flexibility of this feature.

It's unforgettable how much MOOER's multi-effects pedals have impressed audiences so far, primarily thanks to their robust tone libraries. However, even still, the GS1000 continues to build upon this with storage for up to 120 sampling profiles, along with continued integration with the MOOER Cloud app. Essentially, this cloud integration facilitates infinite upload and download possibilities, giving users access to a global community of shared tones, widely expanding the number of accessible tones. More still, the GS1000's previously mentioned third-party IR cabinet simulations support up to 2048 sample points, guaranteeing studio-grade tonal accuracy across the board.

Even more impressive for the price is how the GS1000 inherits the dual-chain effects architecture that made previous MOOER gear so versatile, making it suitable for highly complex usage scenarios. With over 350 factory effects models and a Sub-Patch preset grouping mode, the GS1000 makes it far simpler for users to make seamless transitions between tones, all while maintaining effect tails to guarantee seamless transitions. Additionally, the reintroduction of the innovative AI-driven EQ Master builds upon MOOER devices' previous capabilities, using intelligent adjustments in real-time to match the musical style of players to tones, while still allowing manual tweaks for precise control.

Impressively, the GS1000 also comes packed with a Groove Station module, consisting of a combination of drum machine and looper features - including 56 high-quality drum kits! It offers a 480-second phrase looper with infinite overdubs, automated detection, and synchronization capabilities, resulting in an intuitive platform for solo jamming, composition, and live loop-based performance. Overall, the Groove Station acts as an all-in-one suite for creating full arrangements, without having to depend on additional backing tracks or bandmates.

Visually and functionally, the GS1000 really stands out thanks to its sleek visual design and enhanced user experience. For example, it features a convenient 5-inch high-resolution touch screen, which is also paired with ambient lighting to add a visually stunning element to the pedal. As a result, the GS1000 is not only designed for convenient touch-based control but also as a standout centerpiece in any guitar rig.

In addition to this touchscreen control system, the GS1000 also provides expanded connectivity options, improving upon the already impressive flexibility of past pedals. Most notably, it supports connectivity with the MOOER F4 wireless footswitch, as well as the ability to control presets via external MIDI devices.

As is expected from MOOER these days, the GS1000 also excels when it comes to routing opportunities, going above and beyond the typical stereo 14" inputs and outputs that would be expected from other brands. Yes, it still includes such staples, but it also includes an XLR microphone input, alongside balanced TRS outputs for long-distance signal clarity. The configurable serial/parallel stereo effects loop enables seamless integration of external effects, and the addition of Bluetooth audio input and MIDI compatibility broadens its wide range of use cases for live and practice-based applications.

Furthermore, the pedal also serves as a professional audio solution thanks to its low-latency 2-in/2-out ASIO USB sound card. Supporting up to 192kHz sampling rates, the GS1000 makes recording and live streaming effortless, as it can easily be used with software DAWs, MOOER's editing software, as well as the USB-based MIDI control.

The GS1000 will be available in two versions - the standard white edition, which is powered by mains power, and the GS1000 Li version, which introduces a 7.4V 4750mAh lithium battery, chargeable through its power port. With this upgrade, users can enjoy up to six hours of continuous power-free playtime, making it ideal for practicing, busking, and generally performing on the go.

Overall, for fans of MOOER's previous amp simulation offerings, the GS1000 represents a natural evolution, building on everything that made its predecessors great while introducing cutting-edge features and expanded capabilities. Most importantly, MOOER has promised to continuously update its MOOER 4.0 tonal algorithms on the MOOER Cloud in line with the release, keeping things fresh for the company's dedicated user base.

Notes: Intelligent multi-effects from Mooer, the Prime M2 is a compact, convenient pedal compatible with the Mooer Prime mobile app, Mooer Studio desktop software and the Mooer Cloud tone-sharing platform.

Supplier's Notes:
Over the last few years, MOOER has released several Prime multi-effects devices, including the Prime P1, P2, S1, and most recently in 2024, the Prime Minimax M1. Excitingly, the company is kicking off 2025 with a brand new addition to the Prime family-the Prime Minimax M2 Intelligent Pedal.

Within this small multi-effects device, a whole lot of functionality is packed in, including an impressive 194 effects models, including overdrive, preamp simulators, cabinet models, delays, reverbs, modulation effects etc., and more. In typical MOOER style, though, the company took things a step further by offering limitless flexibility through the support of its in-house MNRS sample files, as well as third-party IR sample files. Essentially, this means that users can download additional tonal emulations and effects from the MOOER Cloud and third-party sources to the device, which they can then save across 80 preset slots.

As with some past models in the Prime series, the M2 sports a convenient touchscreen design, facilitating easy browsing through the device's banks of presets. However, guitarists are not limited to interfacing with the pedal in this way, as it also features two footswitches, both of which can be used to switch between presets in each bank. There is even a MIDI jack built into the device, enabling users to connect their MIDI controllers to extend the control functions, and the MOOER F4 wireless footswitch support is also supported. Essentially, these augmentation options facilitate additional footswitches to ensure switching preset tones is always as quick and seamless as possible within any workflow.

While the Prime M2 Intelligent Pedal is primarily designed for effects and tonal simulations, it also comes packed with an array of other useful features. For example, it contains a looping module with a hefty 80-minute capacity, in addition to 10 recording save slots to ensure that any looping creations can be kept for future use in performances. Similar to past looper modules in MOOER's products, users are also free to overdub their recordings and even undo or redo their overdubs, offering a lot of real-time flexibility for creating loop-based musical structures.

As if the addition of a looper wasn't enough, this feature is also synchronizable with an internal drum machine and metronome, a combination that includes 56 drum grooves and 4 metronome varieties. Ultimately, it's a reminder that MOOER clearly recognizes and wishes to solve the struggles that musicians have when attempting to produce precise loops while staying in time. Upon commencing recording, the drum machine can produce four initial beats to serve as a count-in cue, and of course, this can be combined with the device's tap-tempo control for dynamic use. Best of all, this feature can also be applied to modulation and delay effects, ensuring that they work perfectly in time with any performance.

Extra features are included to complete this all-in-one pedal, including a high-precision tuner with fully customizable frequency ranges. Guitarists can even leverage the M2's built-in Bluetooth input support, allowing them to practice, jam, and even produce looped musical structures over their favorite backing tracks, band prototypes, and musical pieces.

Perhaps unsurprisingly for existing MOOER product users, the Prime M2 also boasts an impressive variety of audio routing systems. As was previously mentioned, that includes Bluetooth input, as well as industry standards such as dual-channel stereo output, perfect for stereo delay and modulation effects. It also supports headphone output for those who wish to practice in silence, and even OTG recording, which means that guitarists can record their creations directly to their smartphone whilst on the go.

Speaking of on-the-go, MOOER is continuing its recent portable-play focus with the Prime M2 Intelligent Pedal, as it is fitted with a built-in rechargeable lithium battery with a battery life of up to 6 hours. Ultimately, this means that even a lack of local power sources won't get in the way of rehearsals and live performances. Combined with the pedal's lightweight and small build, it truly is an ideal addition to the pedalboard of any traveling musician.

Overall, the Prime M2 Intelligent Pedal is set to be an impressive new addition to the Prime series. It features augmented functionality when compared to past models, yet still in a minimalist and easy-to-use package, keeping the size small and light yet still packing in footswitches, a touch screen, and other flexible control systems.

Notes: A fresh, original take on pitch shifting, the HammerOn generates hammer-on pitch shifts which alternate between two different intervals. Seven modes provide a range of effects, from simple hammer-ons to automatic techno guitar sequencing with trills.

Supplier's Notes:
Hands-free Hammer-Ons

Hammer-on notes in conjunction with your hands to create never-before-heard licks and riffs - the only limit is your imagination.

7 pedals in 1

Seven modes range from pitch jumps and harmony effects to pitch sequences and drop/capo tunings - HammerOn is like seven pedals in one.

Play the Impossible

Impossible Mode allows you to hammer-on pitch shifts that alternate between two selectable pitch amounts.

The DigiTech HammerOn is a versatile effects pedal with an amazing amount of flexibility and options to create and channel your musical ideas. Take the time to get to know the many options and see if it sparks new creative ideas.

The PITCH 1 footswitch is dedicated to always be a hammer-on selectable momentary pitch shift above or below what you are playing. PITCH 2 footswitch has 3 different modes of operation selectable using the MODE button. There is a button called DRY+ that can turn on the dry signal and a button called TRILL that can mimic rapid presses of the footswitches.

With all these options it's like having 7 pedals in one:

1. HAMMER-ON: An instantaneous momentary pitch shifter pedal
2. HAMMER-ON with TRILL: A rapid fire hammer-on action pedal
3. HARMONY-ON: An instantaneous harmony creation pedal
4. The IMPOSSIBLE Pedal: A dual alternating momentary pitch shift pedal
5. DROP/CAPO SEQUENCE: A multi-setting pitch transposition pedal
6. SEQUENCE with TRILL: An automatic guitar riff sequencer
7. SEQUENCE with DRY and TRILL: An automatic techno guitar sequencer

Specifications

Electronics
Sample Rate: 44.1 kHz in classic mode, 22 kHz in chords mode
Frequency Response: 20 Hz-16 kHz (classic mode), 20 Hz-11 kHz (chords mode)
Signal to Noise Ratio: > -106dB (A weighted); ref = max level, 22 kHz bandwidth
THD: 0.004% @ 1kHz; ref= 1 dBu w/ unity gain
A/D/A Conversion: 24-bit

Input / Output
Input Type: 1/4" Unbalanced TS
Max Input Level: +5 dBu
Input Impedance: 1MO
Output Type: 1/4" Unbalanced TS
Max Output Level: +10 dBu
Output Impedance: 1kO (Effect enabled or effect bypassed), True Bypass

Physical

Dimensions: 5.12"(13.00cm) x 3.57"(9.06cm) x 1.84"(4.67cm) (L x W x H)
Weight: 1.12 lbs. (508g)

Power

Power Consumption: 2.3 Watts (258 mA @ 9VDC) typical
Power Requirements: External Adapter (included), 9 VDC 1300 mA

Notes: Over the last few years, MOOER has released several Prime multi-effects devices, including the Prime P1, P2, S1, and most recently in 2024, the Prime Minimax M1. Excitingly, the company is kicking off 2025 with a brand new addition to the Prime family-the Prime Minimax M2 Intelligent Pedal.

Within this small multi-effects device, a whole lot of functionality is packed in, including an impressive 194 effects models, including overdrive, preamp simulators, cabinet models, delays, reverbs, modulation effects etc., and more. In typical MOOER style, though, the company took things a step further by offering limitless flexibility through the support of its in-house MNRS sample files, as well as third-party IR sample files. Essentially, this means that users can download additional tonal emulations and effects from the MOOER Cloud and third-party sources to the device, which they can then save across 80 preset slots.

As with some past models in the Prime series, the M2 sports a convenient touchscreen design, facilitating easy browsing through the device's banks of presets. However, guitarists are not limited to interfacing with the pedal in this way, as it also features two footswitches, both of which can be used to switch between presets in each bank. There is even a MIDI jack built into the device, enabling users to connect their MIDI controllers to extend the control functions, and the MOOER F4 wireless footswitch support is also supported. Essentially, these augmentation options facilitate additional footswitches to ensure switching preset tones is always as quick and seamless as possible within any workflow.

While the Prime M2 Intelligent Pedal is primarily designed for effects and tonal simulations, it also comes packed with an array of other useful features. For example, it contains a looping module with a hefty 80-minute capacity, in addition to 10 recording save slots to ensure that any looping creations can be kept for future use in performances. Similar to past looper modules in MOOER's products, users are also free to overdub their recordings and even undo or redo their overdubs, offering a lot of real-time flexibility for creating loop-based musical structures.

As if the addition of a looper wasn't enough, this feature is also synchronizable with an internal drum machine and metronome, a combination that includes 56 drum grooves and 4 metronome varieties. Ultimately, it's a reminder that MOOER clearly recognizes and wishes to solve the struggles that musicians have when attempting to produce precise loops while staying in time. Upon commencing recording, the drum machine can produce four initial beats to serve as a count-in cue, and of course, this can be combined with the device's tap-tempo control for dynamic use. Best of all, this feature can also be applied to modulation and delay effects, ensuring that they work perfectly in time with any performance.

Extra features are included to complete this all-in-one pedal, including a high-precision tuner with fully customizable frequency ranges. Guitarists can even leverage the M2's built-in Bluetooth input support, allowing them to practice, jam, and even produce looped musical structures over their favorite backing tracks, band prototypes, and musical pieces.

Perhaps unsurprisingly for existing MOOER product users, the Prime M2 also boasts an impressive variety of audio routing systems. As was previously mentioned, that includes Bluetooth input, as well as industry standards such as dual-channel stereo output, perfect for stereo delay and modulation effects. It also supports headphone output for those who wish to practice in silence, and even OTG recording, which means that guitarists can record their creations directly to their smartphone whilst on the go.

Speaking of on-the-go, MOOER is continuing its recent portable-play focus with the Prime M2 Intelligent Pedal, as it is fitted with a built-in rechargeable lithium battery with a battery life of up to 6 hours. Ultimately, this means that even a lack of local power sources won't get in the way of rehearsals and live performances. Combined with the pedal's lightweight and small build, it truly is an ideal addition to the pedalboard of any traveling musician.

Overall, the Prime M2 Intelligent Pedal is set to be an impressive new addition to the Prime series. It features augmented functionality when compared to past models, yet still in a minimalist and easy-to-use package, keeping the size small and light yet still packing in footswitches, a touch screen, and other flexible control systems.

Notes: In 2025, MOOER has announced that it will be set to release its latest multi-effects pedal, the GS1000 Intelligent Amp Profiling Processor, an augmented intelligent amp profiling processor. Built on MOOER's advanced third-generation digital platform, the GS1000 introduces groundbreaking MNRS 2.0 technology, allowing guitarists around the world to emulate their favorite gear with immense precision -specifically, for distortion pedals, preamps, amplifier heads, and cabinets.

With this innovation, guitarists can fully capture the essence of their favorite guitar gear without owning the physical hardware, enabling them to carry their favorite tones wherever they go. Users are even able to use third-party IRs for cabinets of their choice, further enhancing the flexibility of this feature.

It's unforgettable how much MOOER's multi-effects pedals have impressed audiences so far, primarily thanks to their robust tone libraries. However, even still, the GS1000 continues to build upon this with storage for up to 120 sampling profiles, along with continued integration with the MOOER Cloud app. Essentially, this cloud integration facilitates infinite upload and download possibilities, giving users access to a global community of shared tones, widely expanding the number of accessible tones. More still, the GS1000's previously mentioned third-party IR cabinet simulations support up to 2048 sample points, guaranteeing studio-grade tonal accuracy across the board.

Even more impressive for the price is how the GS1000 inherits the dual-chain effects architecture that made previous MOOER gear so versatile, making it suitable for highly complex usage scenarios. With over 350 factory effects models and a Sub-Patch preset grouping mode, the GS1000 makes it far simpler for users to make seamless transitions between tones, all while maintaining effect tails to guarantee seamless transitions. Additionally, the reintroduction of the innovative AI-driven EQ Master builds upon MOOER devices' previous capabilities, using intelligent adjustments in real-time to match the musical style of players to tones, while still allowing manual tweaks for precise control.

Impressively, the GS1000 also comes packed with a Groove Station module, consisting of a combination of drum machine and looper features - including 56 high-quality drum kits! It offers a 480-second phrase looper with infinite overdubs, automated detection, and synchronization capabilities, resulting in an intuitive platform for solo jamming, composition, and live loop-based performance. Overall, the Groove Station acts as an all-in-one suite for creating full arrangements, without having to depend on additional backing tracks or bandmates.

Visually and functionally, the GS1000 really stands out thanks to its sleek visual design and enhanced user experience. For example, it features a convenient 5-inch high-resolution touch screen, which is also paired with ambient lighting to add a visually stunning element to the pedal. As a result, the GS1000 is not only designed for convenient touch-based control but also as a standout centerpiece in any guitar rig.

In addition to this touchscreen control system, the GS1000 also provides expanded connectivity options, improving upon the already impressive flexibility of past pedals. Most notably, it supports connectivity with the MOOER F4 wireless footswitch, as well as the ability to control presets via external MIDI devices.

As is expected from MOOER these days, the GS1000 also excels when it comes to routing opportunities, going above and beyond the typical stereo 14" inputs and outputs that would be expected from other brands. Yes, it still includes such staples, but it also includes an XLR microphone input, alongside balanced TRS outputs for long-distance signal clarity. The configurable serial/parallel stereo effects loop enables seamless integration of external effects, and the addition of Bluetooth audio input and MIDI compatibility broadens its wide range of use cases for live and practice-based applications.

Furthermore, the pedal also serves as a professional audio solution thanks to its low-latency 2-in/2-out ASIO USB sound card. Supporting up to 192kHz sampling rates, the GS1000 makes recording and live streaming effortless, as it can easily be used with software DAWs, MOOER's editing software, as well as the USB-based MIDI control.

The GS1000 will be available in two versions - the standard white edition, which is powered by mains power, and the GS1000 Li version, which introduces a 7.4V 4750mAh lithium battery, chargeable through its power port. With this upgrade, users can enjoy up to six hours of continuous power-free playtime, making it ideal for practicing, busking, and generally performing on the go.

Overall, for fans of MOOER's previous amp simulation offerings, the GS1000 represents a natural evolution, building on everything that made its predecessors great while introducing cutting-edge features and expanded capabilities. Most importantly, MOOER has promised to continuously update its MOOER 4.0 tonal algorithms on the MOOER Cloud in line with the release, keeping things fresh for the company's dedicated user base.

Notes: One Small Stomp For Man - One Giant Leap For Chorus, Delays & Reverbs

The Zoom MS-70CDR+: Your New Modulation Station

The MS-70CDR+ gives musicians 149 spatial effects ranging from lush choruses to crystal-clear delays to atmospheric reverbs. This single stompbox can shape your tone and provide endless depth and textures.

A Deep Dive into Chorus, Delays, Reverbs & More

Chorus - 43 different chorus and modulation effects that add depth and motion to your sound including phasing, flanging, tremolo, vibrato, detuning, and pitch shifting.

Delays - Featuring 29 mono and stereo delays, with delay times of up to 4 seconds. Everything from reverse and multi-tap to pitch-shifted and self-oscillating delays.

Reverbs - 33 sophisticated studio-quality effects. From spring and plate reverbs to giant hall and arena reverbs.

Dynamics / Filters - Round out your sound with 44 dynamics and filters such as EQ's, compression, noise reduction, and special effects.

Expanded Controls

The MS-70CDR+ offers expansive parameters for each effect, allowing you to dive deep into tweaking your tone.

Define Your Sound
Use a singular effect or up to 6 simultaneously to create unique tones. Save your creations in one of the 100 patch slots or use the 80 preset patches as inspiration to get you started.

Next Generation Circuitry

Newly designed analogue circuits provide more fidelity for improved sound quality. The flat phase response provides sharp attacks and clean low end.

Everything's Better in Stereo.

The MS-70CDR+ has stereo input jacks that accept signals from passive and active guitars, as well as line-level devices such as synthesizers. Its dual line-level output jacks enable you to record and perform with the MS-70CDR+'s 58 stereo effects.

Soundscapes Are Key

For musicians looking to add lush layers to their synths or keyboards, the MS-70CDR+ provides high-quality effects that are perfect for adding atmosphere and character to your sound.

Change Patches With MIDI

With USB MIDI, you can connect the MS-70CDR+ to other MIDI gear to remotely trigger patch changes.

Enhanced Navigation

Cross Key Switches

The Cross Key switches allow you to instantly switch between effects and patches with a tap of your foot.

Control Knobs

Adjusting and tweaking parameters for each effect can be done with the four encoder knobs.

Colour Coded LCD Screen

The LCD backlight changes colour to make it easier to distinguish each category of effects while scrolling.

Sturdy Build

The MS-70CDR+ is built around a metal frame designed to withstand the rigors of live performances.

Power Options

The MS-70CDR+ runs on 2 AA batteries, USB power or AC power.

Tune-Up

The onboard chromatic tuner uses the colour backlight to give visual feedback to help you tune quickly and accurately. It supports all standard guitar tunings as well as open & drop tunings.

Handy Guitar Lab

With a growing library of patches and effects, guitarists can continue to expand their sound with the Handy Guitar Lab for MS-70CDR+ app for iOS. *Coming Soon to the App Store.

Technical Specifications

Maximum number of simultaneous effects: 6 effects
User patch memories: 100
Sampling frequency: 44.1 kHz
A/D conversion: 24-bit 128× oversampling
D/A conversion: 24-bit 128× oversampling
Signal processing: 32-bit
Frequency response: 20 Hz - 20 kHz (+0.5 dB/-0.5 dB) (when 10kO load)
Display: 160×128 dot-matrix LCD

Inputs L/R
Standard mono phone jacks
Rated input level: -20 dBu
Input impedance (line): 470 kO
Input S/N: 122 dB

Outputs L/R
Standard mono phone jacks
Maximum output level: +7.2 dBu (when output impedance 10 kO or higher)
Noise floor (residual noise) L/R: -100 dBu

Power
AC adapter: 9V DC 500mA centre negative (ZOOM AD-16 optional)
2 AA batteries (alkaline, lithium or rechargeable NiMH batteries)
Estimated operation time using batteries
These values are approximate. Battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.
Alkaline batteries: about 7 hours (about 5 hours using stereo input)
NiMH batteries (1900 mAh): about 6.5 hours (about 5 hours using stereo input)
Lithium batteries: about 14 hours (about 10 hours using stereo input)

USB Port:
USB 2.0 Type-C / Supported cable type: Type-C
Handy Guitar Lab: USB 1.1 Full Speed
Use a USB cable that supports data transfer. USB bus power is supported.

Dimensions: 133 mm (D) × 79 mm (W) × 61 mm (H)
Weight: 368 g (excluding batteries) / 415 g (including batteries)
Note: 0 dBu = 0.775 V

Notes: The Zoom MS-90LP+ is a versatile stereo looper. With the tap of your foot you can add loops, layers, effects and rhythm patterns. And with 32-bit float processing, the MS-90LP+ gives creators flawless audio quality every time.

Notes: Based on technology from the award-winning LVX and MercuryX pedals, the Enzo X is a superbly powerful six-voice modular synth, with polyphonic pitch detection and no special pickup needed on your guitar.

Supplier's Notes:
Combining 5 synth modes, Enzo X incorporates each of these into a modular system UI/architecture from both the award-winning LVX and MercuryX pedals.

In addition to being a 6-voice poly synth, Enzo X includes 3 reverbs which are adapted from Mercury X (Prism algorithm), 5 Drives (including Bitcrush), a full stereo 2.5 second Delay and 5 modulation types.

To make this complex system immediately intuitive to navigate, Meris again leveraged the simple and easy to use UI first developed for LVX.

Notes: Black Fountain Stereo Characterful Delay Building on the inimitable Black Fountain, a pedal that put OBNE on the map and for many a favourite always-on device, Black Fountain Stereo is much more than just turning things from mono into stereo. It truly expands Old Blood Noise Endeavors' highly regarded 'oil-can delay' pedal right into a multi-tool.

With a wider control set that's complete with added sonic options, a lower noise floor, dual delay lines that play together in a multitude of ways, presets, MIDI and expression control over everything, Black Fountain Stereo combines a sonic powerhouse of creative delay tones and into a pedalboard friendly package.

Black Fountain Stereo emulates the sound of a spinning oil-can delay. This is a warm, modulated and a little gritty type of tone that's perfect for chorusing, doubling, slap back and long rhythmic delays alike. You choose the amount and rate of modulation, the tone and grit of the core voice, the two delay times and their feedback. Plus, to top it off the mono/stereo voicing of it all can be set exactly as you like and everything can be saved into presets, for easy recall.

The Rate and Depth controls sets the amount of modulation and speed, Tone shapes the warmth of the repeats, while Grit sets the amount of drive in the repeats. To help maintain the clarity of your tone or for more special effects, you can set the mix of volume of either the Dry and/or Wet levels. Space defines the mono delay mode or stereo width and adds diffusion past the noon position.

Separate controls are available for setting the Left and Right Delay Time as well as being able to choose between six subdivisions for each side when holding the Tap footswitch. That little Tap switch (surprise) helps you set the delay repeats in time with your tempo, while holding it down will give for infinite feedback. Optionally, it can also be used as a preset switcher.

Product Height (cm): 6.9
Product Width (cm): 10.8
Product Depth (cm): 12.6
Product Weight (kg): 0.454

Box Height (cm): 7.06
Box Width (cm): 11.43
Box Depth: 12.7cm
Boxed Weight (kg): 0.596kg

Notes: Meet "The Botanist" - the definitive modulation pedal for musicians of all kinds. This compact and multifaceted pedal delivers a powerful impact with its trio of distinct algorithms: Phaser, Chorus, and Harmonic Tremolo, opening up a realm of limitless creative opportunities for shaping your sonic landscape.

Easily tailor your sound using the three intuitive knobs: Mix, Rate, and Depth. Employ the Mix knob to smoothly blend your wet signal, fine-tune the Rate knob to govern the effect's tempo, and adjust the Depth knob to modulate the effect's intensity to your liking.

"The Botanist" is equipped with MIDI capabilities, granting you remote control over bypass, presets, algorithms, and features. Engage the 'Hold' function by holding down the "Bypass/Hold" switch, which instantly maxes out the Depth control and seamlessly restores it to its previous setting upon release.

With six presets at your fingertips, "The Botanist" simplifies switching between your preferred sounds, and its compact design ensures it's the ideal companion for gigging musicians. Whether you find yourself in an intimate club or a sprawling stadium, count on "The Botanist" to consistently deliver your ideal tone.

For musicians seeking a compact, versatile, and top-tier effect, "The Botanist" stands as the quintessential guitar pedal. Featuring three distinct algorithms, MIDI functionality, a convenient Hold function, and an array of six preset slots, "The Botanist" becomes your ultimate musical companion, opening doors to uncharted sonic horizons.

Highlights

The futurist can send any kind of MIDI message allowing you control of anything that has MIDI!

16 messages per preset

Send a total of 16 MIDI messages per preset on any MIDI channel!

Plenty of presets!

The Futurist has 210 total presets organized into 30 banks of 7 !

Programable footswitches

Program each footswitch to be a preset, tap, bank up, bank down, preset up, and preset down. Customize your Futurist to meet your needs!

MIDI Clock

The Futurist can generate its own MIDI clock or pass along MIDI clock from an outside source!

Message triggers

The Futurist supports Press, Release, Long Press, Long Release, Toggle On and Toggle Off as message triggers

Unique features

Midi communication over USB, manage presets and update firmware (with Matthews Effects Editor), and power The Futurist.

3.5MM TRS MIDI IN/OUT

connect directly to devices that use a TRS connection for MIDI and can be used with adapters to connect to 14 inch MIDI connections.

5-pin MIDI IN

Connect to devices that use the traditional 5 pin midi connector.

Utility jack

Configurable to send analogue tap tempo signals or as a latching or momentary switch.

Control jack

Plug in an expression pedal to dynamically send Control Change messages over MIDI or configure the jack to accept 3 additional switches to expand the functionality of the futurist.

Technical

High-grade components selected for their superior quality
3.5mm, traditional 5 pin and USB MIDI connections
Utility jack lets you send analogue tap or switch signals
Control jack lets you use expression or add 3 additional switches
Foot-switches designed to last against the abuse of the road
9V 50MA

Computer Editor

The Matthews Effects Editor allows you to manage presets, update firmware and improve the control ability of your Matthews Effects products from the ease of your Mac or PC!

Notes: Introducing "The Traveler" - the ultimate reverb pedal for any musician. This compact and versatile pedal packs a punch with its three unique algorithms: Mod, Shimmer, and Vintage, giving you endless creative possibilities for your sound.

The three knobs, Mix, M, and Feedback, allow you to customize your tone with ease. Use the Mix knob to blend your wet signal in, adjust the M knob to control a different unique feature on each algorithm, and the Feedback knob to control how long the reverb is. With "The Traveler", you can create anything from subtle reverb textures to full-blown sonic landscapes.

"The Traveler" also features MIDI capabilities, allowing you to control your presets, algorithms and features remotely. By holding the "Bypass/Hold" switch you activate the 'Hold" function which instantly jumps the feedback control to its max setting and then returns it to its previous place once the switch is released.

The six preset slots make it easy to switch between your favourite sounds, while the compact size makes it the perfect companion for gigging musicians. Whether you're playing in a small club or a large stadium, "The Traveler" will deliver the perfect tone every time.

"The Traveler" is the ideal guitar pedal for any musician looking for a compact, versatile, and high-quality effect. With its three unique algorithms, MIDI capabilities, Hold function, and six preset slots, you will explore new sonic landscapes with 'The Traveler' - your ultimate musical companion.

Notes: Best known for Eurorack synth modules, Noise Engineering's Batverb builds on the brand's extensive experience, offering a performance-focused take on echoes, dynamics and tone.

Supplier's Notes:
Batverb is the stereo reverb that dreams are made of. Taking inspiration from Noise Engineering's famed tail-generating synth modules, Batverb brings reverberation and delay to a whole new level with extensive control of timbre, echoes, and dynamics.

Start by setting a predelay time and adjusting Regen to taste: this will set the length of the tail, from a short slapback-style echo to an infinite wall of reverberation. Add in some chaotic suboctaves with Doom, or some haunting overtones with Shimmer - or both at the same time. If you need to carve the range for your reverb, Batverb has low and high damping settings for the reverb tank. Batverb even has settings for saturation that can be applied to only the reverberant signal, or to the whole output.

Batverb is easy to balance with the rest of the effects in your chain, thanks to its onboard dry/wet Blend control, as well as input and output gain parameters. It also features a unique Duck switch that allows the reverb to duck out of the way of an input signal, or match the dynamics of your playing, similar to a gated reverb.

Batverb was designed to integrate perfectly into your performances. The left switch mutes the input to the reverb and sets the feedback to maximum, creating a wall of sound as long as it's held down. The expression input can also be routed to any parameter on the pedal. Plus, if you're a fan of MIDI, Batverb can store and recall 16 different presets and recall them in response to program change messages.

Batverb is an advanced pedal with state-of-the-art features, but it's incredibly easy to use and immediately fun to play.

Notes: Last year in 2023, MOOER released its Prime Stomp S1 multi-effects pedal, to great critical acclaim. The device expanded on MOOER's previous pedalboard creations, applying a more sleek, lightweight, and, most importantly, chargeable design. Now, the company is turning heads once again with the Prime Minimax M1, an upgraded device that improves functionality not only for electric guitarists, but for bassists too.

Packed inside the Prime Minimax M1 are 149 high-quality effect models across 10 banks, each of which contains 4 patches. These include amp and cabinet simulations and overdrives, along with dynamic, modulation, delay, reverb, and EQ effects, as well as empty user slots. Most notably, though, 20 of the amp and cabinet simulations have been curated specifically for bass guitarists, showing MOOER's dedication to providing support for this additional audience.

As with the Prime Stomp S1 and other recent MOOER multi-effects pedals, the Prime Minimax M1 is supported by the MOOER Cloud, a cutting-edge framework for preset sharing. Not only does this allow guitarists to customize and share their favourite M1 creations via the Bluetooth-compatible MOOER Prime app, but it also supports the importing of third-party IR files of up to 512pts. As a result, the 149 built-in effects are greatly expanded, with users able to simulate their favourite classic amplifiers, cabinets, and tones, whether they have downloaded them online or recorded the IRs themselves.

Taking an all-in-one approach to guitar practice and performance, the M1 also includes a built-in drum machine, complete with 40 different drum grooves and 10 metronomes. This goes hand-in-hand with the 80-second looper, with which guitarists can record electric and bass guitar phrases, play them back, and overdub them, all with simple footswitch presses. The looper can even be triggered automatically through signal detection, ensuring that loops always begin perfectly to form a perfect loop. Moreover, the looper can also be synced with the drum machine, a combination of which results in an all-in-one suite for songwriting.

Rather than the four footswitches found on the Prime Stomp S1, the Minimax M1 features just two footswitches, facilitating a more compact and streamlined design. Each footswitch is multi-functional, supporting a variety of tasks, such as browsing preset slots, triggering loop recordings, activating the device's built-in tuner, the tap tempo functionality, and interacting with the drum machine. The status and information of these features are visualized through the device's LED screen, along with indicators for Bluetooth activation, charging, battery life, and footswitch status. Two buttons are also provided-one to activate the drum machine and another for the device's power toggle.

In contrast to MOOER's recent flagship device, the GE1000 Li, the Prime series focuses heavily on portability and compactness. Weighing up at just 190g and 12cm in length, the Minimax M1 can fit comfortably into any backpack and most pockets, facilitating on-the-go guitar practice and performance. To add to this convenience, the M1 can be charged by USB through its built-in 2000mAh lithium battery. As a result, with the device's portability, guitarists can truly use this multi-effect pedal anywhere, anytime.

Continuing MOOER's reputation for providing flexible audio routing options, the design of the Prime Minimax M1 inputs and outputs are varied. Of course, the usually 14" mono input and 14" stereo output are available, as well as the 3.5mm output for headphone practice and monitoring. However, further options are available, such as Bluetooth 5.0 support for audio playback, allowing users to stream audio from another device to play along with. The device's USB-C port can even be used for OTG recording, allowing users to record their creations directly into the MOOER Prime mobile app.

Overall, the Prime Minimax M1 is yet another welcome addition to the pedal producer's range of multi-effects pedals. In particular, it marks a new level of portability for MOOER's device portfolio, showing just how much functionality its design team can pack into such a small box.

Notes: Sync all your time-based devices, seamlessly move through preset setlists, and simplify tempo matching with the Canvas Clock! Designed for any kind of rig you throw at it and deeply customizable, users can put their full trust in the Clock to be an all-in-one tempo solution for their board.

The Canvas Clock can interface to any device in your rig that accepts clock signal, whether MIDI, (via the 1/8 in or 5-pin MIDI ports) or analogue (via the 1/4 in jacks). Clock will send time signals for both MIDI and analogue devices, and will continue to do so as you move through your song list or manually adjust the tempo. As you edit, save, and recall songs in real-time or via the online editor at walrusaudio.io, Clock will send your specific settings for whichever song you are currently on out to all of the time-based devices you are connected to.

Customize your Clock

The four 1/4" in jacks aren't just for sending tempo. They can each be assigned one of four functions:

Tempo Out - Connect to any pedal or device that accepts external tap inputs or analogue time controls (ex: Walrus' Arp-87 Delay or Monument Tremolo). Canvas Clock can send analogue clock and MIDI clock at the same time. No more relying on your feet to keep perfect time.

CV (Control Voltage) Out - Control any device that accepts CV. Good for Analog Synths, Drum Machines, or similar devices.

Switch Input - Each jack can be configured to receive input from two external footswitch controls. The switches are connected to the Tip (left) and Ring (right) of the associated 1/4 in jack. These can be assigned to many functions available on the pedal with the ability to add more options via a software update.
Expression In - Connect an expression pedal, and use it to send a MIDI CC message out to a pedal connected to the Clock. The "Toe Down" and "Heel Down" values can be adjusted to fine-tune the controlled parameter range. Use this to adjust the mix of a reverb or the depth of a tremolo (via MIDI out).

Footswitches

Footswitches for the Clock are customizable. Eliminate the "bending over between songs to make adjustments portion of a set" by assigning one of the onboard functions to the A and/or B switches:

-Advance to the next song
-Go back to the previous song
-Advance to the next setlist
-Go back to the previous setlist
-Toggle the metronome start and stop
-Global tap tempo

Sync

The "Sync" jack found on top of the pedal can be set in two ways:
-Input - Great for accepting BPM from an external source.
-Output - Great for syncing external devices, such as a Eurorack device, a Roland Volca Synth, and many other devices.
Some external devices send/receive clock signals that are "double" the standard timing signals, so Walrus included the option to send/receive a 1x or 2x signal, depending on the specific device's needs. Users can also determine the subdivision of the BPM to send out.

Metronome


If active, the Clock metronome can be heard via the MET OUT port at the top of the pedal. This signal can be sent to a front of house console for live gigs or a monitor for practicing. Metronome type, volume, and accent note controls can all be edited in the Metronome Menu.

Songs

There are 128 "Song" slots available to users in the Canvas Clock. You can think of each song as an editable preset where you can adjust the song name, meter, BPM, MIDI Macros, and metronome start or stop. Once your song is edited to your liking, every time it is recalled it will operate just the way you set it!

Setlists

Keeping your songs organized is crucial for live sets, which is why with the Clock, songs can be grouped together and navigated through easily using the Setlist feature. Once you access setlist settings, you can select songs from your master song list to curate and reorder in the way you'd want them for a gig or practice. Once your setlist is saved and active, going through the setlist in real-time will recall these songs and all their settings in the order you curated them for that setlist.

MIDI Macros

For the MIDI-minded players who may want further control over their rig, there are standard MIDI commands that can be triggered when you recall songs with the Clock. MIDI Macros allow users to create one or a series of MIDI CC or PC messages that get sent out of the Canvas Clock when a specific song is recalled. Users have 128 adjustable Macros with 15 messages per MIDI Macro, which can be useful in further dictating how you want your MIDI devices to behave during certain songs, (ex: bypassing some pedals but engaging others).

Walrusaudio.io

While you can edit and customize your Canvas Clock settings using the menu on the pedal, users can also connect the pedal to a computer via the USB-C port and customize their Clock with the Canvas Clock Editor web-app. Quickly and easily set up songs, edit your Setlists, edit MIDI Macros, and more. Firmware updates will also be available via this site as well.

Specs

Power:
9VDC, 300mA,
Center-Negative, 2.1mm center pin OR Powered via USB-C
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended. Power supply not included.
Computer Connectivity: Requires Chrome web browser on either Windows or Mac OS. Visit walrusaudio.io to use the Canvas editor and get firmware updates when available.
Enclosure: 2.3" x 2.96" x 4.84" including jacks & knobs

Hardware

Preset/Menu Encoder and Switch
Tempo/Save Encoder and Switch
Footswitch A
Footswitch B
1/4" Jack 1 (TS or TRS)
1/4" Jack 2 (TS or TRS)
1/4" Jack 3 (TS or TRS)
1/4" Jack 4 (TS or TRS)
MIDI In/Out (5-pin DIN)
MIDI In/Out (1/8th" TRS cable)
Sync (1/8th" TRS cable)
Met Out (1/8th" TRS cable - not intended to drive headphones, please plug into high impedance input)
USB-C

Notes: The legendary Strymon deliver quality goods once again with this analogue-inspired stereo delay. Single head sound gives a classic 60s vibe with modulation and subtle imperfections.

Supplier's Notes:
Experience the dreamy sound of a classic '60s tape echo complete with the harmonic richness of the accompanying tube preamp. Enjoy organic and ethereal modulation produced by countless subtle mechanical imperfections, and easily dial in anything from warm slapback to expansive echo feedback beds with a strikingly gorgeous stereo image. With beautifully-tuned low frequency response, lush tape saturation and sublime echo decay, EC-1 provides all the best of what a tube driven tape echo can deliver.

EC-1 offers impressive power and flexibility in a small and elegant form factor: Selectable tube-modeled preamp voices. Artifact-free tap tempo. Discrete stereo operation for independent processing of the left and right stereo inputs. Straightforward controls and expression pedal capability. High-impedance, ultra-low noise discrete Class A JFET stereo input preamp for exceptional touch sensitivity, dynamics and feel. MIDI control of tempo, patch save/recall and more. Premium components, rugged construction and a USB jack for performing firmware updates or controlling the pedal from a computer.

Featuring meticulous tube modeling techniques, EC-1 offers a choice of two authentically reproduced preamp circuits that lend a subtle vintage character to your input signal. One is based on the classic EP-2 tube preamp and features an enhanced high-end shelf perfect for brightening up darker humbuckers. The other preamp option (the default setting) produces a warm, balanced response based on the modded preamp circuit in the EP-2 unit that we studied during the development of EC-1. This option adds a pleasing sense of heft, especially to single-coils. Both preamp choices offer an optional boost of up to +6dB, or the preamp can be bypassed for an unprocessed dry signal if desired.

Strymon's unique dTape technology was first developed for El Capistan, and they have expanded on it to reproduce all the inspiring nuances weencountered while studying a recently-acquired tube Echoplex that was in uncommonly superb condition. Our dTape system allows precise replication of every aspect of every tape echo we've studied, and in EC1 this includes the effect of the moving head, the tape condition, the bias setting, the mechanical effects of motors, capstan slippage and all the irregularities that add up to create the unmistakable, inspiring sound of vintage tape echo repeats.

Whether you want the cleanest repeats, subtle fattening or even downright dirty echos, you can instantly dial in the desired amount of tape saturation with the flip of a switch. Providing pleasing tonal shifts from thinner to fatter, EC-1's three-way Record Level toggle switch selects the gain of the signal fed into the virtual record head. Choose the low position for unity gain with optimized bias for the cleanest repeats, medium for a 6dB input signal boost with increased bias for slightly saturated repeats, or high for a 12dB input signal boost with further increased bias for heavily saturated repeats. This control also gives you a fast and easy way to match EC-1's response to your input signal level to obtain the desired sound from any pickup type or pedalboard configuration.

For EC-1, fluctuations from motors and mechanical components were thoroughly studied to accurately capture their imperfections. At the lower end of the Mechanics control's range only slower motor-related wow and flutter are present, but at around one o'clock these fluctuations are reduced in favor of faster disturbances from crinkle, splices, and capstan slippage which accurately replicate the sound of our golden EP-2 unit.This setting can create uniquely reverberant and three-dimensionalechos that spread across the stereo spectrum. The slower fluctuations are mixed back in more prominently as you approach the maximum Mechanics setting, and the unique combination of multiple imperfections create truly gorgeous, organic stereo modulation effects unlike anything you've ever heard.

The frequency characteristics of tape echo repeats are determined in part by the bandwidth of the actual tape stock, so older tapes will have a lower bandwidth with a warmer top end. EC-1 allows you to faithfully reproduce these characteristics by turning up the Tape Age knob for warmer repeats, or turning it toward minimum for the full-bandwidth sound of fresh tape.

EC-1 is designed to allow high levels of repeats that are truly lush but that don't spiral into uncontrollable feedback. That wide sweet spot on the edge of runaway feedback can create intriguing sound beds under your lead or rhythm playing. Of course if you want to crank the Repeats control to maximum and play with the unique pitch effects that only a sliding record head tape echo can produce, those effects are all precisely replicated in sound and response.

Notes: The signature tones of a guitar legend on your pedalboard

Joe Satriani's TONEX ONE is the latest product of IK's ongoing relationship with one of the guitar world's most respected players. It is truly something special. Handmade in Italy in a custom chrome finish, this limited-edition pedal comes preloaded with 20 presets created by Joe. These exclusive presets feature Tone Models from his Amp Vault Signature Collection, also included, but go beyond that by incorporating Joe's choice of TONEX FX to recreate the great moments of his recording career.

"The TONEX ONE roars and shimmers like its full-size big brother, the mighty TONEX Pedal. You can use it as a standalone amp, a recording interface, or even a headphone practice amp. And it looks amazing!"
Joe Satriani

20 Custom presets with TONEX FX

Exclusively with TONEX ONE Joe Satriani, you'll immediately experience 20 presets custom-designed by the artist himself. All presets feature Tone Models from Joe's TONEX Amp Vault collection, plus the new TONEX FX blocks to recreate his essential tones in one compact pedal.

The preloaded tones range from the early years to new sounds featuring his latest Signature 3rd Power Dragon Amplifier. The presets are inspired by and named after classic songs, including "Time Machine," "The Extremist," "Summer Song," "Ice 9," "Crush of Love," "Love Thing," and many more.

Includes Joe's Amp Vault Signature Collection
This limited-edition pedal includes Joe's complete Amp Vault Signature Collection for TONEX, featuring 28 amplifiers from his private collection. Joe handpicked each amplifier, dialed in his favorite settings and captured them using IK's Advanced AI Machine Modeling at Sammy Hagar's Red Rocker Studios.

The 67 Tone Models are incredible and a testament to Joe's relentless pursuit of great tone and generosity in sharing them with the TONEX community.

Specs

TONEX ONE

20 customizable presets
Ultra-low noise, 24-bit/192 kHz converters.
5 Hz-24 kHz frequency response
Up to 123 dB dynamic range
USB connection/ 24-bit/44.1 kHz audio interface
Power Source: 9V DC, 120 mA (not included) or via USB-C
Size: 48 mm/1.89" (W) x 94 mm/3.7" (D) x 53 mm/2.09" (H)
Weight: 160 g/ 5.6 oz

Package includes

TONEX ONE
USB C-Type to USB C-Type connection cable (0.6 m/2 ft)

Notes: Limited black edition of the excellent stereo Dark Star pedal, offering premium reverb with beautifully creative pitch shifting, filtering and bit crushing options. Superb value for money.

Supplier's Notes:
Dark Star Stereo Flagship Reverb Pedal

The continued pull, the drift unabated, the controlled wash of gravity and the chaotic meander of its combined uncertainties. In fact, the original and highly loved Dark Star is a pedal that historically was OBNE's most popular reverb. People bonded with its warmth and aliasing, its long trails and the way it encouraged you to turn the mix fully up. Now, it's in with the new. Dark Star Stereo expands on the promise of ambient reverb and is a pitch shifting, bit crushing, filtered reverb pedal with just about every feature you could ask for. One massive stereo voice, with a wide suite of controls that likes to go anywhere in your signal chain - all that's left is for you to decide just how dark you must go.

Reviving the magic of the long-trail lo-fi reverb algorithm that made Dark Star a breakout hit years ago, Old Blood Noise Endeavors announces a new Dark Star for a new era, with a drastically expanded feature set and improved signal quality that is sure to draw in old fans and new. New features like Stereo Input and Output, on-board Presets, Trails, Expression control over all parameters and MIDI control, of both Parameters and Presets, all help to give more versatility to this device than ever before. Beyond that, the new Dark Star does away with the three-mode toggle, instead creating a single mode combining all the Pitch-Shifting, Bit-Crushing, delayed goodness of the original. Access your favourite sounds as well as new combinations, with new shapers like Filter, Multiply, Volume and Stereo-Spread.

Notes: Dark Star Stereo Flagship Reverb Pedal

The continued pull, the drift unabated, the controlled wash of gravity and the chaotic meander of its combined uncertainties. In fact, the original and highly loved Dark Star is a pedal that historically was OBNE's most popular reverb. People bonded with its warmth and aliasing, its long trails and the way it encouraged you to turn the mix fully up. Now, it's in with the new. Dark Star Stereo expands on the promise of ambient reverb and is a pitch shifting, bit crushing, filtered reverb pedal with just about every feature you could ask for. One massive stereo voice, with a wide suite of controls that likes to go anywhere in your signal chain - all that's left is for you to decide just how dark you must go.

Reviving the magic of the long-trail lo-fi reverb algorithm that made Dark Star a breakout hit years ago, Old Blood Noise Endeavors announces a new Dark Star for a new era, with a drastically expanded feature set and improved signal quality that is sure to draw in old fans and new. New features like Stereo Input and Output, on-board Presets, Trails, Expression control over all parameters and MIDI control, of both Parameters and Presets, all help to give more versatility to this device than ever before. Beyond that, the new Dark Star does away with the three-mode toggle, instead creating a single mode combining all the Pitch-Shifting, Bit-Crushing, delayed goodness of the original. Access your favourite sounds as well as new combinations, with new shapers like Filter, Multiply, Volume and Stereo-Spread.

Notes: ***B-STOCK: Box opened, product in perfect working order***


MOOER is well known for producing highly versatile multi-effect pedals, but its latest product announcement, the Prime Stomp S1, is not just a multi-effect pedal. It is an all-in-one pedalboard for guitar effects and tones, looping, and music production, complete with a unique portability-focused design.

Initially, guitarists will be impressed by its 126 internal guitar effects and tone presets, which are editable, sharable, and downloadable through the MOOER Cloud platform, fostering unlimited tonal flexibility. However, these capabilities shine particularly brightly when combined with the pedal's recording features.

This includes a looper module, which facilitates up to 80 seconds of looping, whilst also providing functionality for real-time playback, loop deletion, and overdubbing. Loops and arrangements can also be recorded directly onto a mobile phone or tablet through a USB/OTG cable.

When combined with the pedal's 40 synchronizable drum machines, 10 metronomes, and tuner, these looping and recording capabilities empower guitarists to craft complete musical arrangements within a single unified pedalboard, without the need for studio equipment. All features can be controlled by four simple footswitches, making for a powerfully minimalist user experience.

Whilst MOOER offers several pedalboards that offer similar functionality, the Prime Stomp S1 stands out due to its focus on portability. Instead of being powered by a mains power supply, it is powered solely by an integrated lithium battery. This battery is charged by a USB C port, enabling users to charge the pedal with a portable power bank, laptop, or regular USB C charger. The device also weighs just 350g, making it effortless to carry in a backpack.

Whilst the Prime Stomp 1 primarily caters to traveling musicians, it still includes industry-standard pedal features, such as a 1/4" input, stereo 1/4" outputs, and an independent headphone output. All of these features are presented in a sleek case and are visualized by MOOER's signature digital LED display, making for an unbeatable unified toolkit for traveling guitarists.

Notes: The Qi Etherealizer (pronounced "chee ethereal-izer"), a collaborative creation with Yvette Young, is a multi-effects pedal that combines Chorus, Delay, Granular effects, and, of course, Reverb, into a creative playground for atmospheric exploration.

Known for her innovative and explorative fingerstyle playing technique, love of guitar pedals, and leadership of the math rock band Covet, the Qi reflects her approach to creating lush, evolving soundscapes. Named after the vital life energy that flows through all living things, the Qi is designed to deliver rich textures, expansive atmospheres, and dynamic layers. By blending Yvette's artistic vision with cutting-edge design, the Qi opens the door to immersive, otherworldly sounds.

The Qi allows you to mix and match the chorus, delay, and grain and run in series or parallel to create your own inspiring universe of possibility in a stereo field. With the ability to save presets and bypass the chorus, delay, and grain controls, you can quickly and instantly change settings by simultaneously pressing the Bypass and Freeze stomp switches. Go from a traditional chorus with a little bit of delay, or go all in and let the Qi take over with unexplainable washes of glitchy and lush ambiance. Whatever your style is, the Qi will give it a new life.

The Qi is the first creation to emerge from Walrus' groundbreaking proprietary digital processing platform, MDSP. Designed in-house by their talented engineering team, MDSP sets a new benchmark for high-fidelity audio and innovative design, delivering decades of inspiration to creators seeking practical yet forward-thinking gear.

At the core of MDSP is the powerful ARM-based Cortex M7 processor, renowned as the highest-performing processor in its class. With a proven history in high-level electronics, the Cortex M7 has been meticulously tailored for advanced audio algorithm processing in the MDSP platform. This unique system integrates a microcontroller and a DSP into a single compact unit, enabling a smaller, modular design that can seamlessly adapt to a wide range of pedal formats.

This modular and "mini" approach empowers Walrus Audio to push the boundaries of audio processing. The enhanced capabilities of Walrus's MDSP allow for the development and execution of more sophisticated algorithms than ever before, delivering unparalleled creative possibilities for musicians and audio professionals alike.

The MDSP platform also boasts a superior audio codec, supporting faster sample rates, increased bit depth, greater headroom, and an exceptional signal-to-noise ratio. These enhancements ensure outstanding audio performance, setting a new standard in digital signal processing for the music industry.

The introduction of MDSP reflects Walrus Audio's commitment to providing creators with cutting-edge tools that inspire innovation and creativity.

Global Controls


Space Knob: Space adds a delightfully charming reverb to your affected signal. Use this knob to modify the mix and decay of the reverb. Go from smaller room sounds to a huge, diffused ambient reverb at maximum settings. It's lush and complimentary, and adding it in with the other effects will put you squarely in dreamscape territory.


Tone Knob: The Tone parameter controls the cutoff of a synth-style resonant low pass filter, allowing you to shape the tone of the effect output.


Series and Parallel: In series, effects will feed into each other in the order of Chorus > Delay > Grain > Output.


In parallel, all of the effect outputs on Chorus, Delay, and Grain are summed together and do not feed into each other. The top row of knobs will act as level controls, and the user can control the level of each effect.


The Mix/Dry parameter controls the mix of wet and dry signal in series mode and dry level in parallel mode.

Grain Controls


The featured Grain effect features two 'flavours' of operation:


Grain Cloud: This mode triggers small samples (grains) randomly from your playing, which gives you unpredictable, yet charming glitchy texture for your sound. The X knob controls the length of time between grains, so you can go from dense clusters to sparse accents.


Phrase Sample: This mode triggers grains rhythmically from your playing. Initial peaks in your playing are detected and grains are played back starting at these peaks, creating a rhythmic and intentional effect. The X knob controls the tempo at which the samples will be played back. Turning the X knob to the minimum position will sync the Phrase Sample time to the Delay time so that repeated grains are in time with the Delay repeats.


The Grain effect also features 5 playback modes that dictate different ways the grain samples are projected.


x1: Normal
x2: Double-speed and +1 octave
x.5: Half-speed and -1 octave
REV: Reverse playback
RNDM: Randomized combination of the previous four modes.


Delay Controls

The delay effect is a full, clean digital delay that offers repeats for up to two seconds. Use the time knob to control the time between delays as well as the feedback knob to control the amount of delays. The TAP/OSC switch on the bottom right of the pedal can also be used to control the delay effect via tap tempo, or when held down will ramp up the feedback and cause the delay to oscillate.

Subdivisions

Delay trails can be projected in three subdivision modes:

Quarter Note
Dotted Eighth Note
Eighth Note

Chorus Controls

The Chorus effect offers two modes:
Tri Chorus: A multi-dimensional chorus favourite. Lush, complex, modulated sounds combining three voices for a full, vibrant sound.

Stereo Chorus: This mode is a classic chorus effect but with the modulation of the chorus being offset 180 degrees to the right channel to achieve the stereo width effect.


Other Features

Three on-board presets (red, green, blue) plus a live mode (white).
TRS MIDI 1/8" in and thru ports for MIDI control.
USB-C port included for future firmware updates.
Momentary Grain Freeze
Momentary Grain + Max Reverb Freeze

Notes: The Qi Etherealizer (pronounced "chee ethereal-izer"), a collaborative creation with Yvette Young, is a multi-effects pedal that combines Chorus, Delay, Granular effects, and, of course, Reverb, into a creative playground for atmospheric exploration.

Known for her innovative and explorative fingerstyle playing technique, love of guitar pedals, and leadership of the math rock band Covet, the Qi reflects her approach to creating lush, evolving soundscapes. Named after the vital life energy that flows through all living things, the Qi is designed to deliver rich textures, expansive atmospheres, and dynamic layers. By blending Yvette's artistic vision with cutting-edge design, the Qi opens the door to immersive, otherworldly sounds.

The Qi allows you to mix and match the chorus, delay, and grain and run in series or parallel to create your own inspiring universe of possibility in a stereo field. With the ability to save presets and bypass the chorus, delay, and grain controls, you can quickly and instantly change settings by simultaneously pressing the Bypass and Freeze stomp switches. Go from a traditional chorus with a little bit of delay, or go all in and let the Qi take over with unexplainable washes of glitchy and lush ambiance. Whatever your style is, the Qi will give it a new life.

The Qi is the first creation to emerge from Walrus' groundbreaking proprietary digital processing platform, MDSP. Designed in-house by their talented engineering team, MDSP sets a new benchmark for high-fidelity audio and innovative design, delivering decades of inspiration to creators seeking practical yet forward-thinking gear.

At the core of MDSP is the powerful ARM-based Cortex M7 processor, renowned as the highest-performing processor in its class. With a proven history in high-level electronics, the Cortex M7 has been meticulously tailored for advanced audio algorithm processing in the MDSP platform. This unique system integrates a microcontroller and a DSP into a single compact unit, enabling a smaller, modular design that can seamlessly adapt to a wide range of pedal formats.

This modular and "mini" approach empowers Walrus Audio to push the boundaries of audio processing. The enhanced capabilities of Walrus's MDSP allow for the development and execution of more sophisticated algorithms than ever before, delivering unparalleled creative possibilities for musicians and audio professionals alike.

The MDSP platform also boasts a superior audio codec, supporting faster sample rates, increased bit depth, greater headroom, and an exceptional signal-to-noise ratio. These enhancements ensure outstanding audio performance, setting a new standard in digital signal processing for the music industry.

The introduction of MDSP reflects Walrus Audio's commitment to providing creators with cutting-edge tools that inspire innovation and creativity.

Global Controls


Space Knob: Space adds a delightfully charming reverb to your affected signal. Use this knob to modify the mix and decay of the reverb. Go from smaller room sounds to a huge, diffused ambient reverb at maximum settings. It's lush and complimentary, and adding it in with the other effects will put you squarely in dreamscape territory.


Tone Knob: The Tone parameter controls the cutoff of a synth-style resonant low pass filter, allowing you to shape the tone of the effect output.


Series and Parallel: In series, effects will feed into each other in the order of Chorus > Delay > Grain > Output.


In parallel, all of the effect outputs on Chorus, Delay, and Grain are summed together and do not feed into each other. The top row of knobs will act as level controls, and the user can control the level of each effect.


The Mix/Dry parameter controls the mix of wet and dry signal in series mode and dry level in parallel mode.

Grain Controls


The featured Grain effect features two 'flavours' of operation:


Grain Cloud: This mode triggers small samples (grains) randomly from your playing, which gives you unpredictable, yet charming glitchy texture for your sound. The X knob controls the length of time between grains, so you can go from dense clusters to sparse accents.


Phrase Sample: This mode triggers grains rhythmically from your playing. Initial peaks in your playing are detected and grains are played back starting at these peaks, creating a rhythmic and intentional effect. The X knob controls the tempo at which the samples will be played back. Turning the X knob to the minimum position will sync the Phrase Sample time to the Delay time so that repeated grains are in time with the Delay repeats.


The Grain effect also features 5 playback modes that dictate different ways the grain samples are projected.


x1: Normal
x2: Double-speed and +1 octave
x.5: Half-speed and -1 octave
REV: Reverse playback
RNDM: Randomized combination of the previous four modes.


Delay Controls

The delay effect is a full, clean digital delay that offers repeats for up to two seconds. Use the time knob to control the time between delays as well as the feedback knob to control the amount of delays. The TAP/OSC switch on the bottom right of the pedal can also be used to control the delay effect via tap tempo, or when held down will ramp up the feedback and cause the delay to oscillate.

Subdivisions

Delay trails can be projected in three subdivision modes:

Quarter Note
Dotted Eighth Note
Eighth Note

Chorus Controls

The Chorus effect offers two modes:
Tri Chorus: A multi-dimensional chorus favourite. Lush, complex, modulated sounds combining three voices for a full, vibrant sound.

Stereo Chorus: This mode is a classic chorus effect but with the modulation of the chorus being offset 180 degrees to the right channel to achieve the stereo width effect.


Other Features

Three on-board presets (red, green, blue) plus a live mode (white).
TRS MIDI 1/8" in and thru ports for MIDI control.
USB-C port included for future firmware updates.
Momentary Grain Freeze
Momentary Grain + Max Reverb Freeze

Notes: Active gain boost pedal to increase the level of your guitar signal with 2-band EQ for tone shaping. Ideal for driving the input of a guitar amp to a point to make it distort the true sound of the amplifier, or as a signal booster for pushing the guitar forward in the mix for a solo, or even a combination of both.

Low & High tone controls
9V battery or optional DC adaptor operation

Power supply: 9V battery (PP3 included) or optional DC adaptor
Construction: Aluminium housing with rubber base
Controls: Low, High and Level

Dimensions: 115 x 68 x 47mm
Weight: 275g

Notes: A hard hitting distortion effect pedal, ideal for metal and hard rock styles. Dial in the desired amount of distortion with Gain and set the output Level to suit. Tone adjusts the amount of grit and bite to accentuate the guitar sound if needed. High gain on demand for high energy music.

Power supply: 9V battery (PP3 included) or optional DC adaptor
Construction: Aluminium housing with rubber base
Controls: Gain, Tone and Level
Dimensions: 115 x 68 x 47mm
Weight: 275g

Notes: Add clean sustain to your guitar notes and chords with the CM-50 compressor pedal. Turning up the Sustain control squashes down the peaks in the signal and lifts the quieter parts, causing notes that are fading out to last longer with effortless sustain. Set the output with the Level control and adjust the amount of picking emphasis with the Attack control. Great for country licks and overlapping arpeggios.

Sustain, Level and Attack controls
9V battery or optional DC adaptor operation

Power supply: 9V battery (PP3 included) or optional DC adaptor
Construction: Aluminium housing with rubber base
Controls: Sustain, Level and Attack
Dimensions: 115 x 68 x 47mm
Weight: 275g

In the Box

CM-50 compressor pedal
PP3 battery