ダンスミュージック検索結果

Notes: Great value from this compact filter module. The Pip Filter is a 12dB/oct resonant design with built-in normalled VCA and a trigger input for pinging. Lots of functionality and creative potential packed into 4 HP.

Supplier's Notes:
Compact Low Pass Filter and VCA

The 'Pip Filter' is a compact 4HP voltage controlled 2 pole low-pass filter with resonance, a 'pingable' trigger input and built in VCA.

Filter cutoff is controlled via both knob control and dual CV inputs with a built in attenuverter.

Resonance is manually controlled and will reach into self oscillation with rough V/Oct tracking.

A trigger input allows the filter to be pinged for percussive plucked type sounds. Finally, a built in VCA (normalled open) allows for additional independent amplitude control of the filtered signal.


Technical Specifications

Size: 4HP
Power: +12V 25mA / -12V 25mA
Depth: 32mm (approx)

Notes: Compact Analogue LFO & VCO

The 'Pip LFO' is a compact 4HP all analogue low frequency oscillator with a wide frequency range, voltage control, numerous outputs, reset input and a VCO mode.

LFO speed is set via a manual control and voltage control input. There is a unipolar square wave output along with both bipolar and uni-polar triangle, saw and sine waveform outputs.

When VCO mode is activated, the frequency jumps to audio range and will track V/Oct for approx 5 octaves. A reset input allows the LFO waveform cycle to be reset and produces hard sync functionality in VCO mode.


Technical Specifications

Size: 4HP
Power: +12V 40mA / -12V 20mA
Depth: 32mm (approx)

Notes: Four voice paraphonic

Ripsaw contains 4 voices that can each be individually controlled with 1 volt per octave pitch CV.

Seven oscillator spread

Each of Ripsaw's 4 voices contain 7 waveforms that can be detuned from eachother in pitch to create a lush swarm oscillator sound.

Wave morph

Ripsaw's oscillator waveforms morph smoothly from classic sawtooth to square for a hollow, haunting tone when spread detune is introduced.

Super sync

Ripsaw's shift parameter offsets the pitch of a hard sync oscillator for every one of the 28 waveforms to open up a whole new timbral dimension

Hex platform

Ripsaw is only the first firmware to be released on our new 6hp eurorack hardware platform called HEX. Other firmware options that generate and process sound will be available to download and try out free of charge.

Specifications:

6hp
25mm deep
42mA on +12V, 5mA on -12V, 0mA on +5V

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Developed in conjunction with Dutch software dons 112dB, the Echolocator brings precise, ultra-controllable delay to the hardware realm. Full stereo design with filter and shimmer modes, freeze function and foot switch input.

Supplier's Notes:
The Echolocator is a hands-on precision tool that lets you take manual and very musical control over small nuances. Like a bat navigating its environment in the dark, you can feel your way through your live performances and shape the delay response and character on the fly. Featuring 12 parameters for detailed sound design, save/recall functions for all parameters, MIDI control over all parameters and a sleek aluminium case to match our lineup of compact desktop units, the Echolocator will let your setup take flight in any live show, studio or sonic experiment.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Co-developed with Laidback Luke and designed for seamless integration with Algoriddim's djay Pro software, the Mixtour Pro is a compact four-deck controller with built-in audio interface. Great value and super portable.

Supplier's Notes:
The future of DJing

The Reloop Mixtour Pro exceeds expectations in the tiniest of spaces and provides a professional yet portable solution for the club and festival scene. The ultra-compact DJ controller was developed in close collaboration with legendary DJ & producer, Laidback Luke and is specifically designed to use seamlessly with Algoriddim's award-winning Djay Pro software.

Mixing with up to four decks

Despite its small size, the Mixtour Pro is capable of supporting four-deck mixing with its powerful and intuitive controls. Thanks to the illuminated transport section with dedicated coloured LEDs, users are always informed of whether decks 1 and 2 or decks 3 and 4 are currently active. The aluminium browse encoder and designated load buttons allow for efficient library navigation and instant loading of tracks.

Professional design and FX control

The Mixtour Pro's two channel strips with their trusted design are fitted with all the important controls for a modern DJ setup. Each channel features an electroplated bi-polar sound filter (LPF/HPF) with a dedicated LED indicator, in addition to gain and three-band EQ. The convenient FX paddles allow the user to trigger effects in bursts via FX Hold mode or to apply them indefinitely via FX On mode. A large, electroplated dry/wet knob controls the intensity of the effect, while the two dedicated parameter buttons offer complete control over the effect parameters. The lower performance area is fitted with 45mm Ultra Glide crossfader and line faders, for the smoothest operation in the mix.

Made for Djay & Neural Mix

The Reloop Mixtour Pro unlocks Algoriddim's Djay Pro software and incorporates their revolutionary Neural Mix™ technology into the workflow with dedicated controls. This allows DJs to isolate and manipulate individual drums, instruments, and vocals from any tracks in real time, expanding creative mixing capabilities to a whole new level. This feature is toggled easily and intuitively with the press of a button and controlled via the EQ controls of the two channel strips.

Crossfader Fusion™

The Mixtour Pro is also the first DJ controller to support Algoriddim Djay Pro's revolutionary Crossfader Fusion feature. DJs are now able to select from a range of creative transition styles that are automatically applied when mixing from one song to another, delivering a perfect mix every single time with the simple slide of the crossfader.

Flexible performance pad section

Eight performance pads with RGB lighting provide users with more creative options with a wide range of modes including Hot Cue, Bounce Loop, Pitch Cue, Instant FX, Auto Loop, Sampler, Skip and Neural Mix™. Furthermore, all eight pads can be assigned to control one channel in single pad mode, or four pads can be assigned to a channel each via split pad mode.

Full control: the transport section

The Mixtour Pro's sophisticated transport section enables a smooth and efficient workflow. It features four rubberized buttons for each channel to control Play / Pause, Cue, and Sync respectively, while the signature "Laidback Loop" button independently offers instant looping (In/Out/Exit) with a single control. This transport section also offers secondary layer functions to control Auto Loop, Key Match, Pitch Bend, and Key Shift. The transport buttons also illuminate in 2 different colours representing decks 1 and 2 or decks 3 and 4, respectively, keeping the DJ clearly informed when performing.

USB-C design for multi-platform & device support

The Reloop Mixtour Pro provides impressive compatibility options when pairing it with a device and platform. A smartphone, tablet or computer can all be conveniently bus-powered thanks to the modern USB-C architecture. The unit also houses a second USB-C PD port, capable of up to 85W to efficiently daisy-chain a power supply, allowing the device and controller to be powered simultaneously. Algoriddim's Djay Pro is available for iOS, iPadOS, macOS, Windows, and Android for even more cross-platform versatility.

Stream it!

In addition to performing with locally stored music, the Reloop Mixtour Pro together with Algoriddim Djay offers access to millions of tracks on demand via major streaming servicesj such as Tidal, SoundCloud Go+, Beatport Streaming, and Beatsource Streaming. These different sources can all be mixed together and even combined in the same playlists within Djay Pro.

Powerful audio quality

As the name suggests, the Reloop Mixtour Pro also delivers in regards to professional audio. The integrated 4x Out USB interface with high-quality D/A converters from Cirrus Logic enables first-class 24-bit sound with low latency. Direct connection is provided via gold-plated RCA outputs and a 3.5mm headphone jack.

Internet connection and a Apple Music, Tidal Premium or HiFi or SoundCloud Go+ subscription required. Tidal Premium or HiFi and SoundCloud Go+ subscriptions include access to Beatport Streaming and Beatsource Streaming.

The app's functionality may vary depending on the platform used. Only Pro functions that can be operated with the controller are activated without a subscription.

Technical data

Inputs: USB (type C) DC IN port (max. PD 85 W)
Outputs: Master RCA (unbalanced), headphones 3.5 mm stereo jack, USB (type C) data port
Dimensions: 129(W) x 310(D) x 51(H) mm
Weight: 956 g
Minimum system requirements: Please refer to the manufacturer's specifications for the system requirements of your DJ software.
Incl. USB-C to USB-C cable, RCA cable and instruction manual

Notes: The Girls Aloud Show" Blu-ray features the entirety of one of the band's sold-out performances at London's O2 Arena from June 2024. An unforgettable journey through their record-breaking career, the 90-minute show features fan favourites such as Love Machine, Biology, Sound of the Underground and much more. It also includes bonus footage of the visuals of the on-stage screens from 3 songs, along with the official video for "I'll Stand By You (Sarah's Version)" and the 38-minute long "The Whole Damn Show Megamix.

Region Code: Region B

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Limited-edition Lamborghini model of the superb SL-1200MK7. The unique SL-1200M7B model combines the Italian marque's legendary styling with the tried-and-tested performance of Technics.

Supplier's Notes:
Design Inspired by Lamborghini DNA

The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini's iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers-with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.

*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO2-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO2 efficiency class with discharged battery: G; WLTP values

Exclusive Gifts

The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Lamborghini's latest models, the Revuelto. As you listen to the sounds of Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation

The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equalling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment

The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function

The pitch control function allows fine adjustment of the rotation speed within i8% / i16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function

The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.

*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm

The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED

The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

Specifications

Technics for Automobili Lamborghini collaboration model

Coreless Direct-Drive Motor Achieving Stable Rotation

Diverse New Functions Adapt to Various Playing Styles

High Sensitive Tonearm

Stylus Illuminator Featuring a High-brightness and Long-life White LED

High-rigidity Cabinet and High-damping Insulator

Tech Specs

General

Power Supply: AC 120 V, 60 Hz
Power Consumption: 8 W Approx. 0.2 W (Standby)
Dimensions (W x H x D): 453 x 169 x 353 mm
Weight: Approx. 9.6 kg
Accessories: Turntable, Slipmat, Slipsheet, Dust cover, Technics sticker for limited edition, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Control vinyl stickers, Owner's Manual

Terminals

Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1

Tonearm Section

Type: Universal Static Balance
Effective Length: 230 mm
Overhang: 15 mm
Tracking Error Angle: Within 2 degreees 32'?(at the outer groove of 30cm (12") record), Within 0 degrees 32'?(at the inner groove of 30cm (12") record)
Offset Angle: 22-
Arm-height Adjustment Range: 0 - 6 mm
Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
Head Shell Weight: Approx. 7.6 g
Applicable Cartridge Weight Range: 5.6 - 12.0 g (without auxiliary weight), 14.3 - 20.7 g (including head shell)

Turntable Section

Type: Direct Drive Manual Turntable
Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
Starting Torque: 0.18 N*m / 1.8 kg*cm
Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
Wow And Flutter: 0.025% W.R.M.S.
Turntable Platter: Aluminum diecast
Diameter : 332 mm
Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Notes: The TMA-2 Studio Wireless headphones provide a seamless wireless functionality for music creators seeking freedom of movement, cable free recording, and a light, comfortable build with exceptional performance for versatile use. Free yourself from cables with ultra-low latency wireless audio.

Connect wirelessly to all of your gear: Cable-like performance with under 10ms of latency via W+ Link technology, featuring 20+ hours of playback time.

Hear all the details: Detailed and balanced sound representation with strong frequency separation reveals the subtle details in your music.

Control your sound profile: Use the AIAIAI app EQ to shape the sound to your preference, whether that be flat and accurate for mixing or dialing up the bass for creative sessions.

Stay in the zone for hours: Over-ear cushions and padded headband using high grade memory foam covered in soft PU leather, for enhanced comfort during creative sessions or live performances.

Go beyond the studio: Use W+ Link for live performance or switch to Bluetooth mode for everyday listening and making calls, or plug directly in with the detachable cable.

Customise, replace and upgrade: The modular nature of TMA-2 Studio Wireless allows for endless customisation and easy upgrades or replacements of individual parts.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Great value mid-range rotary mixer from Omnitronic, a big step up from the popular TRM-202. Large format two-channel design, featuring three-band channel EQs, master isolator, multi-mode filter and dedicated channel VU meters.

Supplier's Notes:
Rotary in its most beautiful form: Omnitronic TRM-222

With the TRM-222, Omnitronic presents an analogue rotary mixer that has been developed with direct feedback from the community.

Proven features have remained

Like its predecessors, the TRM-222 is equipped with a 3-band master frequency isolator, which uses classic ALPS rotary potentiometers (Blue Velvet RK27) for precise sound control. The kill characteristic allows bass, midrange and treble to be completely cancelled out, giving DJs creative freedom in shaping their sound.

The switchable filter section with HPF, BPF, LPF, resonance and sweep controls allows creative processing of the frequency bands. Two stereo input channels with gain control, clip LED, 3-band EQ and phono/line switching as well as a microphone input channel with gain control, 2-band EQ and on-air switch extend the mixer's range of applications. The LED level display for the master signal (L+R) and cue signal provide a good overview.

New functions at the request of users

During the further development of the mixer, great importance was attached to feedback from the community. New functions such as the VU meter display per channel, dipswitches for individual adjustment of the EQ curve and a booth output (XLR or RCA) with 2-band EQ and volume control testify to the sophisticated functionality of the TRM-222. At the request of the fans, the mixer now has a crossfader in VCA technology with adjustable crossfade characteristics, an adjustable send-return effect path and an adjustable record-out.

In addition, the TRM-222 offers two direct outputs for timecode applications and a variety of outputs: Master and Booth (XLR/ RCA L/R), Record (RCA L/R), Master Insert Send/Return (RCA L/R) and FX In/Out (stereo jack).

Technical specifications

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 15 W
Protection class: Protection class I
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Cable length: 1,5 m detachable
Frequency range: 20 - 20000 Hz
S/N ratio: >100 dB
THD: <0,05 % at 1 kHz
Gain: Line -12 dB to +12 dB
Phono -40 dB to +5 dB
FX 20 dB
Microphone: 55 dB
DJ filter: Routable: LPF, HPF,
Isolators: Master Gain:- 8 bis +9
Low/mid 300 Hz, 18db/oct , Butterworth
Mid/high 4000 Hz, 18db/oct , Butterworth
Housing colour: Black; silver
Control elements: Power switch, source selector, Crossfader, Crossfader selector switch, Crossfade curve switch; Cue mix split function, tone control
Status LED: Power, master level meter, clip, CUE

Connections:

Input: line via 2 x stereo RCA
Input: line/phono via 2 x stereo RCA
Input: Microphone via 1 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: AUX returns via 2 x 6.3-mm-jack (bal.)
Output: Timecode via 2 x stereo RCA
Output: headphones via 2 x 6.3 mm jack socket (stereo) mounting version
Output: headphones via 1 x 3.5 mm jack (stereo) mounting version
Output: rec. via 1 x stereo RCA
Output: booth via 2 x 3-pin XLR
Output: booth via 1 x stereo RCA
Output: master via 2 x 3-pin XLR
Output: master via 1 x stereo RCA
Output: AUX sends via 2 x 6.3-mm-jack (bal.)

Channels:

Input channel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via Rotary, 3-band tone control EQ, source selector, gain control, CUE switch, FX routing switch
Microphone channel: 1 x mono via Combination socket (XLR/jack), channel control via Rotary, 2-band tone control EQ, ON AIR switch
Master output: 1 x stereo via XLR or RCA, channel control via Rotary
Booth output: 1 x stereo via XLR or RCA, channel control via Rotary, 2-band tone control EQ
Rec. output: 1 x stereo via RCA, channel control via Rotary

Headphones output: stereo via Jack, channel control via Rotary
Max. level: Output: +21 dBu
Material: Metal; aluminium
Housing design: Desktop console housing

Dimensions:

Width: 45 cm
Depth: 26 cm
Height: 16 cm

Weight: 5,80 kg

Notes: ***B-STOCK: Box opened, product in perfect working order***


*** Update February 2025- NKS Integration available with this product ***

Native Kontrol Standard (NKS) is a technical standard that connects plugins to hardware controllers with no setup required. The NKS ecosystem includes over 2,000 virtual instruments and plugin effects by over 250 acclaimed developers.

NKS enables users to load instruments and effects, tweak parameters, browse and manage presets with tangible controls, keeping creators' minds and hands on the music. No time is wasted creating, saving, and resetting controller parameter mappings.

Key features include:
Unified Control: NKS maps plugin parameters directly to hardware controls, allowing for hands-on adjustments without navigating computer menus.
Efficient Workflow: It streamlines browsing, loading, and editing presets, enabling producers to stay focused on creativity.
Broad Compatibility: Many third-party developers support NKS, offering a wide range of compatible sounds and effects.
For Our Products: This integration allows Akai and M-Audio compatible devices to fully utilize all NKS workflow features.

Here are some key points to take note of:

Current users will receive the software bundle once they register their device.

Both existing and new owners will receive the software bundle once their hardware is registered.


NKS Software Partnerships

For years, Native Instruments has partnered with world-class software manufacturers, including Arturia, Heavyocity, Korg, Output, Spitfire Audio, and many more, to bring thousands of instruments and effects plugins into the NKS ecosystem. Together with Native Instruments' own instruments and effects, this creates the most extensive database of any auto-mapped hardware controller ecosystem.

Until now, NKS hardware controllers were only available from Native Instruments, such as the Kontrol S-Series and Komplete Kontrol A-Series keyboard controllers.

NKS Hardware Partner Program [New]

At NAMM 2025, NI announced opening up NKS compatibility for third-party, non-NI hardware, allowing millions of performers and producers worldwide to enter the NKS ecosystem.


***

Compact but powerful all-rounder for control over software, plugins and hardware. Typical high-quality Akai build, with a combination of keys, pads, rotary controllers and transport controls for versatility.

Supplier's Notes:
37-key MPK Mini keyboard with advanced connections and controls

The MPK Mini keyboard line revolutionized portable music-making for producers and beat makers all over the world. The new MPK Mini Plus builds on that innovation by empowering musicians with full creative control that delivers ultimate feel and expression, along with next generation performance tools. Advanced connectivity easily and fully unites all your favourite studio devices for complete and expanded hardware integration in a compact 3-octave design.

Full Portable Creative Control

While maintaining its compact footprint, MPK Mini Plus offers extensive controls providing deep command over a wide range of features. 8 velocity-sensitive RGB-backlit MPC drum pads are the backbone for not only playing dynamic beats and programming drums, but for also assigning pro-gram changes and triggering additional CC parameters. Dial in effects with the 8 assignable 360-rotary knobs for every function including filters, automation, pan controls, and more. For the first time on any MPK Mini, enjoy dedicated Transport controls for total integration into your DAW. Eliminate needless back-and-forth from your QWERTY keyboard or mouse and stay engaged in the creative workflow with dedicated Play, Stop, Record, Loop, and Locator buttons.

Ultimate Feel and Expression

As with all MPK Mini controllers, performance starts with the keys. MPK Mini Plus features 37 keys with the Gen 2 Dynamic Keybed for expanded melodic and harmonic creation. 3 full octaves mean more room for two-handed chords, arpeggiation, and laying down solos or soundscapes. The Gen 2 Dynamic Keybed features incredibly playable keys with a wider velocity range, delivering a world-class level of note dynamics and response. With more keys, your music will need new ways to add feel and expression, so the MPK Mini Plus adds dedicated Pitch Bend and Modulation Wheel controllers to help all keyboard performances truly come alive. Alongside the iconic Joystick Controller, there's no shortage of tactile interaction for near limitless expression.

Advanced Connectivity and Standalone Operation

For those spontaneous creative moments or quick jams sessions, MPK Mini Plus can operate with standalone functionality. The new polyphonic Step Sequencer is convenient for capturing new ideas on the fly. Record notes and drum patterns simultaneously for some serious standalone music creation. Connect to any Class-Compliant USB or 5-pin MIDI device and use the CV/Gate connectors to plug into your rack and other modular synths. The MPK Mini Plus is versatile enough for the serious beginner looking to grow their creative space, and also for those seasoned pros who want to get the most out of their studio gear.

Includes MPC Beats DAW for Mac and PC

The bundled MPC Beats software DAW for Mac and PC offers the iconic MPC workflow right on a desktop or laptop computer, and also includes thousands of sounds, drum samples, loops, and plugin instruments to create your next hit song. With more keys on the 37-note Gen 2 Keybed, MPC plugin instruments like Electric and Tubesynth will come alive with extended sonic range. Set the MPK Mini Plus on a desktop and connect with standalone MPC devices to control Mellotron and Hype plugins.

Even with 3 octaves, MPK Mini Plus will fit in your gig bag to easily transport alongside everyday music production items. It's simple math; adding MPK Mini Plus to any workflow equals expressive creativity and intuitive control for modern music creation and beat making.

Connectors
USB Type-B port
(5) 1/4" (3.5mm) CV Outputs
(2) MIDI DIN In/Out Ports
(1) Sustain input
Power Via USB type-B (bus powered or connected to wall adapter).

Dimensions (width x depth x height)
17.76" x 7.08" x 2.04"
45.11 cm x 18.0 cm x 5.2 cm

Weight
2.78 lbs.
1.26 kg

Notes: ***B-STOCK: Slight surface marks ***


Part of Sonicware's brilliant Liven series of affordable, creative groove boxes, the Ambient O packs in layers of drone, textures and noise sources to create engrossing soundscapes. Creative, experimental fun.

*** Firmware version 1.5 update- March 2025 ***

Temperament Settings for Each Track

In addition to the standard 12-tone equal temperament, you can now set 7 different temperaments per pattern, including Pure intonation, Pythagorean tuning, and Solfeggio frequencies.

64 Sound Pattern Palettes

Featuring 32 newly added sounds & patterns, along with 16 Sound Healing Vibes sounds.

Relaxation Playback Mode

Arrange your favourite patterns, set repeats and fade-outs, then let it gently fill your space with ambient sound. (Seamless pattern changes improved: if sound settings remain the same, transitions will now be smooth without audio interruptions.)

Master Tune Now Adjustable in Hz?Master tuning, previously adjustable in cents, can now also be set in Hz increments (410 - 470 Hz).

Line In Selectable on NOISE Layer

The NOISE layer can now be selected to Line In, allowing the application of Filter, LFOs, and other track-level controls to the input signal.

New LFO Waveforms & Assignment

Added three slow LFO waveforms (L.SIN, L.TRI, L.S.RN). Additionally, oscillator level can now be assigned as an LFO destination.

Pitch Bend Range Setting

You can now configure the pitch bend range in the system settings.

Changes in Oscillator Usage

Due to specification changes, the NOISE layer now consumes only one oscillator, while the ATMO 2 structure now consumes three oscillators.

Bug Fixes & Improvements

Fixed MIDI CC issues and addressed other minor bugs.


Supplier's Notes:
Your Personal Soundscape:

Conversations between Oscillating Tones and Your Mind

Immersive Ambient Generator

4 layers of tone and texture-Drone, Pad, Atmos, and Noise-merge to generate deep resonance and continuous transformation.

Ambient O (zero) is incredibly easy to use. Start by playing a tone from one layer using the note hold function. While listening closely, simply tweak the knobs to modify the tone and add other layers to shape a pleasing sound.

Blendwave Modulation Synthesis

Sonicware conducted extensive research into creating undulating and fluctuating tones for Ambient O, resulting in the development of a new wavetable-based synthesis.

Blendwave Modulation Synthesis combines 6 unique structures with 32 WAVEs featuring complex harmonic transitions, making it easy to create powerful low drones, lush pads, and transparent pizzicatos, perfect for Ambient Music.

4 knobs/8 parameters offer a wide range of tone creation.

A WAVE contains 128 harmonic tables, allowing for diverse tonal changes such as moving from basic waveforms to complex harmonics. The WAVE is represented by a yin-yang icon, with the yin representing moves in the reverse direction through the tables during modulation.

6 Structures - Each structure has a different number of oscillators and modulation circuits. ATMOS 1 applies ring modulation, while ATMOS 2 applies FM modulation.

Noise and Space

The Noise layer includes 8 specially selected nature sounds, offering noise blending, pitch adjustment and modulation to infuse unique spatial characteristics.

Additionally, it allows for up to 8 seconds of stereo sampling from the line input, letting you create personalized textures.

Extensive Effects Section

Ambient O is equipped with 9 types of lush reverb, each offering unique spatial dimensions and brightness settings. You can individually adjust the reverb send and shimmer send (for layering octaves) for each layer.

In addition to the reverb, the Ambient O offers an effect unit with Tape Delay, Reverse Delay, and 4 master effects; Overdrive, Bit/Rate Crush, Tilt EQ, and Stereo Chorus.

Sequence up to 64 steps per pattern.
Random playback of sequence phrases.
Probability of notes sounding can be set from 25 - 100%.
Program notes step by step or record them in real time. Additionally, you can also input notes to specific steps while the sequencer is playing to add variation.
Overwrite notes in real-time with one touch while playing back sequence phrases.
The Parameter Lock function allows you to record knob changes into your patterns. This can be recorded live, or programmed in step by step.

Specifications

[Synthesiser]

- Note Hold function
- 128 Sound Pattern Palettes (incl. 16 types of preset palettes)
- Mixing including level/pan for each layer
- Layer (Sound) copy and paste function
- Tune All function changes the pitch of all layers (i1 octave in 20-cent steps, adjustable in 1-cent step)
- Standard polyphony: 10 voices (depending the structure's oscillators x simultaneous voices)

4 Layer Construction
Drone, Pad, Atmos Layers
- New Blendwave Modulation Synthesis for creating undulating and fluctuating tones
- 6 Structures, 32 Waves
Drone 1: 2 oscillators, modulates Detune
Drone 2: 2 oscillators, modulates Harmonics
Pad 1: 3 oscillators, modulates Harmonics
Pad 2: 3 oscillators, modulates Harmonics
Atmos 1: 1 oscillator, ring modulation on output
Atmos 2: 2 oscillators (frequency modulation), modulates Pitch

- Polyphonic mode
- Mono mode (adjustable glide time)
- Legato mode (adjustable glide time)
- Unison mode (adjustable detune)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

Noise Layer
- 1 Structure, 8 Waves
Noise: 1 oscillator, modulates Pitch
- Loop or One-shot playback, White noise mixing
- 16bit - 32kHz Linear PCM sampling (stereo)
- Up to 8 seconds of sampling per sample (crossfade settings from 1 to 4 seconds)
- Auto start sampling function with the input level (input level can be set)
- Import and export of a slot of samples (via MIDI)
*Import of audio files from PC/Mac is not supported.

- Polyphonic mode
- Mono mode (adjustable glide time)
- Legato mode (adjustable glide time)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)
Each layer has its own envelope, filter and 2LFOs.

- Attack
- Release

- Low Pass Filter
- High Pass Filter
- Band Pass Filter

- 2 LFOs assignable to various parameters (individually adjustable)
- Adjustable LFO Shapes and trigger count

[Effects]
9 types of high-quality reverb (Send amount to reverb and shimmer adjustable per layer)
- Small.L
- Small.M
- Small.H
- Large.L
- Large.M
- Large.H
- Infinity.L
- Infinity.M
- Infinity.H
6 types of diverse master effects
- Tape Delay
- Reverse Delay
- Overdrive
- Bit/Rate Crush
- Tilt EQ
- Stereo Chorus
The above reverb and master effects can also be applied to external sources from the LINE IN.

[Sequencer]
- 4 tracks (1 track on each layer)
- Up to 64 steps per pattern
- Step length can be set from 1/1 to 1/32 or 2/1(Breve) to 8/1(Maxima)
- Real-time recording
- Overwrite REC function for real-time sequence replacement
- Directly enter notes for each step when playback is on or off
- Enter longer notes (Tied notes)
- Metronome and pre-count function
- Step copy and paste function
- Track copy and paste function
- Duplicate to extend a sequence
- Transpose function
- Pattern BPM / Global BPM can be set
- Pattern chain function (Loop playback possible)
- Track level and pan can be set independently
- Parameter Lock function to record parameter settings for each step
- Sound Lock function to record sound settings for each step
- Note playback probability can be set from 25 to 100% for each step
- RANDOM function to play back steps in random order

[MIDI]
- Notes, control changes, clock input/output
- Import and export user data
- Firmware update via Sysex

[Unit]

27 keys (with a hold function)


- 15 physical control knobs
- Optional LATCH function prevents jumps in value when knob position and parameter values do not match.
- One physical encoder for fine adjustments.
- LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Deeper. Louder. More accurate.

iLoud MTM MKII offers sonic perfection and volume levels previously unavailable in this class of reference monitors. Maintaining its iconic form, MTM MKII sports more efficient drivers and twice the processing power under the hood to turn any space into the ideal mixing and mastering setup.

Enjoy clear, neutral sound with the deep, controlled low end you'd expect from a speaker twice the size and linear phase response that rivals speakers twice the price. Its MTM design and precise time alignment make hours of fatigue-free listening possible while minimizing acoustic interactions, which is ideal for desktop use.

With advanced ARC auto-calibration, MTM MKII guarantees improved acoustic performance in any space in seconds. Connected to a computer, award-winning X-MONITOR software adds deep customization and breathtaking emulations of 20+ top studio monitors and other playback systems to A/B your mixes instantly for the perfect translation.

MTM MKII is like having an entire suite of precision-tuned monitoring tools.

Ultra-nearfield monitors for critical mixing

iLoud MTM MKII features a pair of 3.5" high-performance woofers and one 1" high-definition, back-chamber loaded tweeter with improved speaker drivers for superior volume and low end, plus improved clarity and articulation in the midrange. The Midrange-Tweeter-Midrange symmetrical design (D'Appolito configuration) provides ultra-precise, defined, point-source sound that can't be achieved by traditional 2-way systems at close distances, meaning you'll mix better and with less ear fatigue.

Designed to work faster in more situations

In addition to improved speaker drivers, iLoud MTM MKII maintains tight vertical dispersion, minimizing the acoustic impact of desktop placement and ceiling and floor reflections to ensure the most accurate possible sound. MTM MKII offers a wider horizontal dispersion, creating a broader sweet spot for easier mixing than other MTM designs while maintaining the smoothest in-room response. Better power efficiency and extended max SPL mean iLoud MTM MKII also offers superior performance as an FOH mixing monitor, immersive speaker or other volume-dependent tasks.

Next-generation ARC room correction

iLoud MTM MKII adds a deeper, more comprehensive ARC auto-calibration derived from IK's flagship iLoud Precision series. Connected via USB to a Mac/PC with X-MONITOR, this 4-space measurement offers an unmatched definition and reliable translation in virtually any environment, so your mixes will always sound their best. A rapid, single-point measurement option can be done anywhere without a computer. Connect an ARC MEMS microphone (sold separately) to each speaker's mic input, and you'll be up and running in moments.

X-MONITOR integration

Also inherited from IK's flagship iLoud Precisions, iLoud MTM MKII now offers full X-MONITOR integration. This exclusive, award-winning software gives you complete control over every speaker element beyond the rear controls. Also, it allows for precise delay compensation between units for improved stereo imaging.

A single solution to A/B mixes

In addition, X-MONITOR allows you to switch between virtual monitoring voices, emulating the frequency and phase response of other top studio monitors and reference systems. With 4 buttons to quickly recall various voices, X-MONITOR with MTM MKII becomes an entire reference monitoring system in one elegant solution.

Stereo to immersive sound anywhere

IK Multimedia packed all this technological sophistication into a compact format that takes up 30% - 50% less space than comparable designs and weighs just 5 pounds. With tilting desktop mounts included, it's the ideal desktop solution for home, project or mobile recording. There's also an included isolation pad for horizontal placement wherever needed.

Bottom mic stand mounts securely position iLoud MTM MKII behind a console for studio or FOH use or even on boom arms to create immersive setups anywhere quickly with no tools required. A custom mounting bracket is also available to easily install MTM MKII as overheads or wall speakers in any studio.

The ideal immersive audio solution

All these amazing features, plus a selectable 80 Hz low-frequency cutoff, also make iLoud MTM MKII the ideal monitor for today's immersive studios.

Specs

iLoud MTM MKII Specifications
Type: 2-Way/3-speakers bi-amped, digitally controlled studio monitor
LF drivers: 2 x 3.5" composite cellulose fiber, custom-made mid-woofers
HF drivers: 1" low distortion, back chambered silk dome tweeter
Acoustic design: DSP tuned bass reflex
Number of amps per speaker: 2
Amplifiers type: High efficiency Class-D
Total power: 100 W RMS
LF power: 70 W RMS
HF power: 30 W RMS
Crossover type: Digital, linear phase
Crossover frequency: 2.8 kHz
Frequency response: 48 Hz to 28 kHz +/- 2 dB, 36 Hz to 32 kHz @ -10 dB
Phase response: System remains coherent within +/- 15- from 200 Hz to 20 kHz
Sensitivity at +4 dBu: -6 dBu signal generates a 94 dB SPL @ 1 m
Sensitivity at -10 dBV: -17 dBu signal generates a 94 dB SPL @ 1 m
Continuous, long term SPL free field, 1 m distance, one speaker, ANSI-2034 Weigthed Pink Noise: 97 dB
Peak SPL free field, 1 m distance, one speaker, ANSI-2034 Weigthed Pink Noise: 110.5 dB
Peak SPL, half space, 1 m distance, one speaker, ANSI-2034 Weigthed Pink Noise: 112.5 dB
Placement setup: Manual switches for LF Extension, LF trim, HF trim, Desk position
LF extension switch: Sets -3 dB point of the frequency response at 40, 50, 60 or 80 Hz (LFE)
LF switch: Low shelf, +2 dB or -3 dB from 100 Hz down
HF switch: High shelf, +2 dB or -3 dB from 8 kHz up
Desk switch: -4 dB at 160 Hz and +1 dB at 1.8 kHz
Calibration: Fully automatic and built-in digital calibration
Full DSP control
Total Latency (TOF): 2.44 ms
Connectors: 1x combo XLR-1/4" TRS balanced input; 1/8" TS ARC microphone input, 1 x USB type-B, AC POWER socket
Power requirement: 90 to 240 V AC, auto-ranging, 50 or 60 Hz, 120 W max power consumption

Dimensions

Size: 264 mm/10.39" x 160 mm/6.3" x 130 mm/5.12"
Weight (per speaker): 2, 5 kg/5.5 lbs (speaker + foot)

Package includes

1 x iLoud MTM MKII monitor
Power cord
Tilting stand
Horizontal support feet
Locking key
USB-B to USB-A 2.5 m/8.2 ft. cable

Notes: PCF-DL10: 10 cm

The EBS PCF flat patch cable is an original design by EBS that started the global trend of flat patch cables for pedalboards. Due to the clever space-saving design, the cables have become the patch cable-to-go for musicians all over the world.

If you have ever struggled with limited space on your pedalboard, the super compact and affordable EBS Flat Patch Cables will help end the frustration. They perform excellently on sound and flexibility while reducing the required space between pedals to a minimum with their unique design.

The new PCF Deluxe (PCF-DL, some stores refer to it as PCF-DL10G, etc.) series is the second implementation of improvements since the original design. It remains the most affordable among EBS flat patch cables.

New features since October 2021:

30% reduced size contact housing.
24K gold-plated tip of the contacts for best performance.
Features shared with the previous version:

Double-shielded cables and very low resistance keep your signal path clean and strong through the pedalboard.

Very compact size and flexible cables ensure effective use of ALL space on your pedalboard.

Since their introduction, these cables have created space on pedalboards for thousands of customers worldwide. We hope you will become one of them too.

Buy the cables at local stores and online dealers all over the world.

Notes: ***B-STOCK: Box opened, product in perfect working order***


12-channel version of Tascam's modern take on the classic Portastudio concept. Digital recorder fused with analogue mixer and audio interface. Great one-box recording solution.

Supplier's notes:
Integrated production suite for music and multimedia creators, songwriters and performers.

Tascam Model 12 is a compact all-in-one integrated mixing and recording suite designed for music and multimedia creators, songwriters and performers. It consists of a 10-input mixer, a 12-track version of the highly acclaimed Tascam multi-track audio recorder, USB audio interface, MIDI connectivity, DAW control functions, and unique podcasting capability including mix-minus and smartphone input.

Combining the feel of an analogue user interface with the efficient workflow and pristine quality associated with digital recording and production, the compact and affordable Model 12 supports your creative process from start to finish.

Notes: Heavyweight 100% cotton t-shirt made in the USA with a silkscreen print of the Disk Union logo.

Notes: Heavyweight 100% cotton t-shirt embroidered of the Disk Union logo.

Notes: Heavyweight 100% cotton t-shirt made in the USA with a silkscreen print of the Disk Union logo.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Meet Xkey Air - the ultimate mobile MIDI keyboard, able to go wherever the music takes you. Featuring an ultra-slim lightweight design, Xkey Air is made for creation wherever inspiration strikes you. From the studio to your living room and everywhere in between, this keyboard brings professional performance anywhere. Simply link Xkey Air to your device and
play along with the best apps and recording software. Xkey Air is a fully class compliant, USB and Bluetooth MIDI controller that works with all MIDI apps on virtually all platforms.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Enlightening

Elevating the groundbreaking optical compression of the original Philosopher's Tone to a new plane of tonal enlightenment, the Philosopher's Tone 2 is a world-class compressor/sustainer with footswitchable Grit, allowing for more versatility than ever before. Featuring a refined implementation of the overdrive circuit first heard in the limited-edition Gold version of this iconic compressor pedal, the unique germanium distortion found in the Philosopher's Tone 2 delivers smooth top end and rich midrange response, tailored to perfectly match the characteristics of the optical sustainer driving it. In addition to Volume and Sustain controls, the Philosopher's Tone 2 features a parallel clean Blend knob that allows musicians to mix their instrument's original tone with the compressor/sustainer effect when the Grit circuit is bypassed. This mixing technique restores natural pick-attack and allows clean settings with extreme sustain to remain dynamic and musical. When the Grit circuit is engaged, the Blend knob is automatically bypassed, circumventing the compromises of the original unit and imparting a colourful distortion to your sound in both Germanium and Silicon modes. This nonlinear diode-clipping can range from subtle overdrive to overflowing distortion, all without unwanted feedback. A Treble control located just before the master Volume provides 6db of cut or boost at 2kHz for fine-tuning the frequency response of the effect. The Philosopher's Tone 2 features true-bypass switching and internal 18V power rails for maximum clean headroom that is ideal for use with hot pickups, active bass, synthesisers and other line-level sources. Runs on 9VDC.

Knob-by-knob

Volume: Sets the overall output volume.
Treble: Boosts or cuts treble at 2kHz.
Sustain: Sets the amount of sustain.
Blend: Mixes your compressed effect with your clean signal. Note: This control is only active when the Grit footswitch is turned OFF.
Grit: Controls the gain of the overdrive stage. Note: This control is only active when the Grit footswitch is turned ON.

Rare design

Generations of guitar players have sought noiseless clean sustain from a compressor, and this was the guiding goal of the research and design behind Philosopher's Tone, yielding a compressor with an internal 18 volts of headroom and naturally musical tone control.

The evolution of Philosopher's Tone

First released in 2009 and igniting a new following for Pigtronix, the Philosopher's Tone 2 is a "best of" design, incorporating the best elements of previous iterations plus a completely redefined Grit knob for significantly more versatility.

Modern-day alchemy

Practitioners of the mystical and ancient art of alchemy long sought an element called the Philosopher's Stone. They believed, if found, it could turn lead into gold and bestow immortality upon the person who wielded it. Philosopher's Tone 2 allows players to conjure gleaming sustain, soaring lead tones, and articulation across all six strings.

Model name: Philosopher's Tone
Function: Optical Compressor Sustainer
Category 1: Compression
Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: High
Output impedance: 150ohms

Body
Length (inches): 1.5
Width (inches): 3.75
Height (inches): 1.75
Weight (lbs): 0.5

Notes: Includes: 2x Ear Cushions for Hi-X55, 1x Mounting Tool.

Notes: Includes: 2x Ear Cushions for Hi-X50, 1x Bow Pad for Hi-X50, 1x Mounting Tool.

Notes: Includes: 2x Ear Cushions for Hi-X65/Hi-X60, 1x Mounting Tool.

Notes: Includes: 2x Ear Cushions for Hi-X50, 1x Mounting Tool.

Notes: 3 meter cable compatible with the Austrian Audio Hi-X20/Hi-X15

Notes: 3 meter cable compatible with the Austrian Audio Hi-X65/Hi-X55/Hi-X50.

Notes: 1.2 meter cable compatible with the Austrian Audio Hi-X65/Hi-X60/Hi-X55/Hi-X50.

Notes: 1.2 meter cable compatible with the Austrian Audio Hi-X60.

Notes: Includes: 2x Ear Cushions for Hi-X65/X60, 1x Bow Pad for Hi-X65/Hi-X60, 1x Mounting Tool

Notes: Contains two ear cushions, two inlays, one screwdriver

Notes: Carry Case for for the Austrian Hi-X65/60/55/25BT/15/PG16

Notes: 3m long cable compatible with the Austrian Audio Hi-X15/Hi-X50/Hi-X55/Hi-X60/Hi-X65.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Punch is the ultimate VCA-DECAY module for Eurorack

Specially designed to generate dynamic percussive sounds but also capable of basslines, leads, envelopes and more. The VCA has a built in voltage controlled Decay envelope that can be turned from smooth to more aggressive exponential responses and can be activated with triggers, gates or cv's.

Punch features two modes per channel to play, with a dedicated switch control: "vintage style drum machine mode" and "dynamic cv mode"

Punch is capable of creating AM sounds with control voltage on the "amount"

Each envelope can be inverted via dedicated switches on the front panel.

If you use an inverted envelope alongside the accent input you can create ducking effects like side-chain compression..

INSTALLATION:
* Disconnect your synth from the power source.
* Double check polarity from the ribbon cable, unfortanetly if you damage the module by powering in the wrong direction it will not be covered by the warranty.
* After connecting the module check again you have connected the right way, the red line should be on the -12V.

Notes: Bringing the sound of the legendary Roland Jupiter-8 crashing into Eurorack, the ISE-NIN is Black Corporation's 100% analogue monophonic synth voice, derived from the mega eight-voice ISE-NIN desktop synth.

Supplier's Notes:
(ISE-NIN) VOICE brings the legendary Japanese discrete analogue sound into a compact 100% analogue Eurorack creation. Ideal for combination with an x0x techno rig, the full depth of rich sonic potential and programmability of ISE-NIN can now be patched into new modular concoctions. A full complement of iconic analog oscillators, filters, envelopes, and modulation make this at once a full-featured semi-modular synth on its own, and a powerful addition to any rig with the addition of ISE-NIN BREAKOUT.

Two Oscillators with Deep Modulation

This is a no-compromise compact recreation of a complete voice - lacking only the desktop synth's polyphony. Two oscillators each include multiple waveforms (triangle, ramp, pulse, and square on the VCO-1, with sine and noise replacing triangle and square on VCO-2). Hard sync is available, as is configurable modulation, with dedicated PWM (controlled manually, via LFO, or via envelope 1), and tweakable modulation amounts from both LFO and envelope 1 to VCO-1, VCO-2, or both. The LFO section provides access to waveform (sine, saw, square, random), rate, and delay.

Unmistakable Filter, Dual Envelopes, Musical Control

The unique classic 80s Japanese filter sound is fully embodied here, with highpass filter, lowpass with two slope options (-12 dB, -24 dB), and resonance, all with their own controls. Dual envelopes, each with four stages, are assignable to the filter, VCO modulation (ENV-1), and VCA (ENV-2), with an envelope mod fader. Envelope 1 also sports a polarity switch. As with our desktop synths, musical control is front and center, literally: you'll find dedicated controls for toggling keyboard input to each envelope, a keyboard amount to VCF fader. If you're using ISE-NIN alone as a voice, you'll have access to 1v/octave and gate inputs with glide control.

Unprecedented Patchability

Start with ISE-NIN VOICE (36HP), and you'll already have a deep semi-modular instrument on its own. But add ISE-NIN BREAKOUT (22HP), and you can place every single control under one-to-one voltage control for unmatched patchability and programmability. This is a level of sound possibility that could would normally require investing in several rows of modules; here, they're all readily accessible on one convenient, compact front plate. Not only do you get dedicated inputs for the oscillators, filters, and each separate envelope stage for both of the two envelopes, but there are separate FM inputs to each oscillator and every possible routing of the LFO, envelope, and keyboard. XMOD amount and VCO-2 quantized range each get their own input.

Power consumption: 110mA at +12V and 30mA at -12V

Depth: 38mm

36 HP

Notes: Breakout for the ISE-NIN Voice

Extensive outputs, open-ended Functionality

The output section of the ISE-NIN BREAKOUT is a perfect match for the voice. Each waveform for each oscillator has its own independent instrument, as does each envelope and the inverse of envelope 1, each filter and slope, each LFO waveform, noise and low noise, and mix. There's also a dedicated headphone output so you can enjoy ISE-NIN without waking the neighbours. You'd be hard pressed to find as much tonal range, as many distinctive vintage Japanese tones, or as much expandability with as much horsepower as ISE-NIN VOICE and its BREAKOUT.

Notes: Sonora is a spectral mixing output module that aims to be the ultimate sound stage of a modular setup. A place where all your mixes meet and find a stereophonic solution for your final track thanks to its twelve fixed panning inputs that allow you to give each track its own space and importance in the stereo field.

While being a 12 inputs summing mixer, Sonora also features a LED meter, a soft clipping limiter circuit at the output stage, a headphone output section with loudness indicators and 3.5mm pro line output jacks.

Notes: The latest in 1010's innovative range of compact devices, the Bento is a fresh take on sampling and sequencing, offering an alternative to conventional options such as Akai's MPC series. Pure standalone creative flow.

Supplier's notes:
Sample Every Flavour

Bento is a portable, all-in-one sampling production lab that brings together flexible sequencing, expressive performance tools, and pro-level connectivity-perfect as the centrepiece of your desktop or mobile rig. Whether you're looping on the go, launching clips live, or sequencing your entire synth setup, Bento gives you the tools to shape your sound from idea to performance.

With pristine 24-bit sound quality, a bright 7" touchscreen, 16 responsive pads, and deep control over samples, MIDI, and effects, Bento offers a fast, fluid workflow in a compact and portable form. Sequence one-shots, build multi-sample instruments, and chop loops using Bento's flexible tracks, scene-based sequencing, and expansive modulation and FX engine.

Designed to replace laptops, simplify cabling, and integrate seamlessly with your gear, Bento features multiple stereo inputs and outputs, USB-C host and device ports, dual TRS MIDI I/O, and a built-in battery for up to 3 hours of mobile creativity.

Recording Capabilities

Capture loops quickly with the option to synchronize the start and stop times to the clock
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Store recorded samples as WAV files on the micro SD card

What's included

bento - sampling production lab
MicroSD card with over 160 patches and over 200 wav files
USB C power cord
USB C power and data splitter
Type B TRS MIDI To MIDI 5 Pin DIN adapter
QR Code with link to the Quick Start Guide

Technical Specs

8 tracks with multiple patch types-sample banks, multisamples, slicers, granular, loops, and external MIDI
16 pressure- and velocity-sensitive pads
7" diagonal touch screen
8 context-sensitive endless encoders
3 stereo inputs, 3 stereo outputs, 1 stereo headphone out
2 TRS MIDI inputs & 2 TRS MIDI outputs (Type A & B)
USB-C host and device ports
Internal battery with 3 hours in low power mode
Includes 155 Patches and over 5000 sample files
Expandable via microSD card
24-bit ADC/DAC
MIDI sequencing, modulation, and CC control support
Compatible with 100 x 100 VESA mounts
Product dimensions: 8" x 8.5" x 2", 2 lb (20.4 x 21.8 x 5.1 cm, 936 grams)
Package dimensions: 10.25" x 8.5" x 2.75", 2.7 lb. ( 26 x 21.6 x 7 cm, 1.2 kg)

Notes: Upgrade any pair of AIAIAI's excellent TMA-2 headphones to high-definition wireless with the S11 and X03 bundle. AIAIAI's W+ Link protocol offers ultra-low latency, lossless sound.

Supplier's Notes:
Combine the upgrade kit with your headband and ear pads from any TMA-2 headphone to go wireless. Experience ultra-low latency wireless performance with more than 20 hours of battery life for uninterrupted sessions. Includes two S11 speaker drivers and the X03 W+ Link Transmitter.

Fully compatible with the TMA-2 Modular system Ultra-low latency wireless audio for cable free performance Powerful, detailed sound tuned to clearly present bass and treble details in loud venues Seamlessly switch between W+ Link for performing and Bluetooth for listening on the go Use the AIAIAI app EQ to shape the sound to your preference

Notes: The next generation of Moog analogue synths, the Messenger draws on iconic designs of the past and introduces modern features which bring it right up to date. Affordable, top quality stuff from a legendary brand.

Supplier's notes:
A new method of sonic experimentation, communication, and connection has arrived. Say hello to Messenger, a next-generation analog synthesizer that celebrates classic Moog circuitry and introduces modern features to shape the future of sound design.

Messenger is a new Moog monophonic analog keyboard synthesiser designed for the electronic musicians, producers, sound designers, sonic tinkerers, and analog dreamers of today and tomorrow. Engineered to open new portals of art and expression through sound, the instrument is ready to be a trusted creative companion for any musical genre or style at any point in your synthesis journey.

If you're new to synthesis, welcome. You're exactly where you need to be. Messenger's intuitive layout with clearly labeled controls invites immediate hands-on exploration and encourages a deeper understanding of how to shape and sculpt sound. For experienced synthesists and sound designers, Messenger is packed full of innovative twists on beloved analog circuitry, blending the iconic, raw Moog sound with flexible, modern features designed for use on stage or in the studio. This synthesiser has two oscillators with wavefolding functionality, a sub-oscillator with continuously variable waveshapes, dual looping ADSR envelopes, 32 semi-weighted full-size keys with velocity and aftertouch, and the legendary Moog ladder filter augmented with resonance bass compensation, multiple filter slopes, and true multimode functionality. Messenger's 256 on-board presets allow for immediate saving and recall of your favorite sounds. An intuitive arpeggiator and expression/sustain pedal inputs make this an indispensable live tool, while its unique sequencer with probabilistic controls and modular connectivity set Messenger up to be at the core of your studio or home setup.

Craft soaring leads and deep, rumbling basses. Create delicately textured pads and flowing arpeggios. Build beats with custom kicks, snares, and toms. Explore dense drones and inharmonic metallics. Pay attention to how these sounds impact the way you hear the world around you.

Timeless and Intuitive: Messenger builds on the DNA of Moog's most iconic and prolific monosynths - Minimoog Model D, Voyager, Grandmother, Subsequent 37 - and puts a new spin on a familiar format with innovative circuits and timeless analog sound.

A Legend Reborn: The legendary Moog transistor ladder filter gets some new tricks up its sleeve. A unique pole-mixing design allows the ladder filter to preserve bass frequencies as resonance is increased via the RES BASS switch while keeping its sonic legacy intact. Low-pass mode adds a 2-pole filter slope in addition to the classic Moog 4-pole low-pass filter slope.

Inspiration at Your Fingertips: 32 full-size semi-weighted keys with velocity and aftertouch, a robust metal panel, 256 presets, and knob-per-function controls mean Messenger is endlessly playable and ready to bring to your next gig.

Compositional Powerhouse: Effortlessly record sequences of up to 64 steps, integrate chance operations, and introduce random fluctuations and parameter recording. Experiment with a plethora of arpeggiator patterns and cascade notes into infinity.

Sound Design and Modulation Playground: Two loopable ADSR envelopes, two LFOs, and expanded frequency and audio rate modulation options via Oscillator 2 provide a wealth of modulation options and deeper assignable possibilities.

Comprehensive Connectivity: Messenger integrates seamlessly into any studio or live setup with six analog control voltage (CV) patch points, an external audio input to the filter, expression and sustain pedal inputs, and 5-pin DIN MIDI in/out as well as MIDI over USB-C.

Notes: MicroLab mk3 is designed for today's modern creatives. Its ultra-compact form factor, high-quality keybed, and intuitive controls make it the perfect MIDI controller for producers working in small studios, on the go, or just starting their music production journey.

With a durable, lightweight design and plug-and-play USB connectivity, MicroLab mk3 fits seamlessly into any workflow - empowering you to start making music instantly. Enjoy complete integration with leading software including Analog Lab Intro and Ableton Live Lite, and extend your creativity with features like chord mode and dual touch strips for expressive performance.

Small, lightweight, durable, and USB-powered - ideal for mobile music-making and compact studio setups.

With a high-quality slim keybed, MicroLab mk3 delivers a responsive and true playing experience that your music deserves.

MicroLab mk3 delivers big sound with 500 curated presets from Analog Lab Intro, intuitive control via four buttons and two touch strips, and instant music production with Ableton Live Lite.

Its plug-and-play USB connectivity and intuitive features ensures you can start creating music right away - no hassle, no setup.

Main Features

High quality keybed

25-note velocity-sensitive slim keyboard, responsive and expressive.

Controls

2 touch strips for pitch bend and modulation.
4 control buttons for octave shift and navigation.

Smart features

Chord Mode - Play full chords with a single key
Hold function
Octave up and down buttons
Semitone transpose

Software integration

Seamless compatibility with all major DAWs and soft synths.
Analog Lab & V Collection browsing - Explore 500 curated sounds instantly.

Included Software titles & services

Analog Lab Intro - 500 sounds from iconic synths and keyboards.
Ableton Live Lite - Essential tools for recording and producing music.

Connectivity

USB-C powered for instant plug-and-play operation.
MIDI class-compliant - Multiclient MIDI driver for Windows.
Compatible with iPads & Android devices (via adapter).
Sustain pedal input - Connect a sustain or expression pedal for enhanced performance.

Size & weight

Size (mm): 406 x 39 x 125 mm
Size (in): 15.98 x 1.54 x 4.92 in
Weight (kg): 0.62 kg
Weight (lb): 1.37 lb

Notes: A premium take on the classic portable turntable concept, the Handytraxx solid playback and compact design, plus contemporary features including digital effects, looping and a built-in fader for scratching.

Supplier's Notes:
Handytraxx Play

Portable vinyl performance, perfected.

The Handytraxx Play reimagines the classic portable turntable with modern innovation. Designed for DJs, vinyl enthusiasts, and creative performers, it combines portability with cutting-edge features, including unique Korg digital effects, a built-in audio looper, and a high-quality fader optimised for scratching. Developed in collaboration with Toshihide Nakama, co-creator of the original Handy Trax, this redefined turntable blends tradition and technology, delivering a truly unparalleled experience for music lovers on the go. Whether you're spinning at home or showcasing your skills anywhere, the Handytraxx Play is your perfect companion.

Key features

A portable player that lets you enjoy playing records and performing as a DJ, wherever you go
Unique Korg digital effects.
Audio looper for a wide range of musical expression and creativity
High-quality fader optimized for scratching
Custom-designed tonearm and motor control circuit
Developed in collaboration with Toshihide Nakama, former President of Vestax Inc.

The Handy Trax, originally created by Vestax, redefined portable turntables by giving users the freedom to play and scratch records anywhere. Beloved by DJs and vinyl enthusiasts alike, it helped spark the rise of "portablism".

Now, Korg proudly reinvents this iconic turntable with the Handytraxx Play. Developed in collaboration with Toshihide Nakama, former President of Vestax and co-creator of the Handy Trax, the Handytraxx Play retains the essence of the original while introducing exciting new features. These include cutting-edge digital effects, a built-in looper, and high-quality controls that make it possible to physically "play" with records on the go. Combined with unique customisation options, the Handytraxx Play delivers an unparalleled portable turntable experience. Perfect for casual vinyl lovers and hardcore portablists alike.

Honouring Toshihide Nakama

The Handytraxx Play is the result of a collaboration between Korg and Toshihide Nakama, the former President of Vestax and co-developer of the original Handy Trax. Developed closely with Nakama as an all-new kind of record player, the Handytraxx Play leverages Korg's unique digital processing and audio technologies while staying true to the spirit of the original Handy Trax. Tragically, Nakama passed away during the development of the Handytraxx Play on June 10th, 2023, but his vision and philosophy live on through this product, carrying his legacy to music lovers worldwide.

Optimised for scratching

The Handytraxx Play has been meticulously designed to provide an exceptional scratching experience. The high-quality fader, developed under Nakama's guidance, offers super smooth, precise motion and minimised silent zones for effortless cuts and transitions. Beginners and seasoned portablists alike will appreciate the responsive feel and the ability to reverse scratch by swapping crossfader channels. Every detail of the fader has been optimised to enhance performance while maintaining the portability that defines the Handytraxx Play.

Unique digital effects

Korg's expertise in digital audio processing brings powerful effects to the Handytraxx Play, elevating its creative potential.

Three types of filters

The Handytraxx Play offers three versatile filter types, each designed to provide dynamic control over your sound. The DJ filter seamlessly blends low-pass and high-pass filters, allowing smooth transitions. The EQ filter with a low isolator enhances bass frequencies for deep, impactful tones. Lastly, the peaking wah filter with modulation adds a unique, expressive touch, letting you shape bold experimental sounds or subtle nuanced effects in real time.
Delay
In addition to filters, the Handytraxx Play features a built-in delay effect that expands your creative possibilities. From creating spacious, ambient soundscapes to bold, metallic echoes, the delay effect can be controlled intuitively using the vertical fader for precise level adjustments.

This seamless integration of effects makes the Handytraxx Play an essential tool to enhance any DJ performance.

Built-in audio looper and versatile playback control

The Handytraxx Play includes a built-in looper that redefines creativity for DJs and vinyl enthusiasts. With its variable speed control switch, the looper lets you capture and replay live playback of a record's sound-a feature known as live looping. This capability allows you to craft unique DJ mixes by adding scratches to a looped beat, recording your favourite sounds to use as a sampler, or even swapping records while the loop continues to play seamlessly. The looper's versatility makes it an essential tool for both experimentation and live performance.

The variable speed control switch provides intuitive options for adjusting playback speed, a fundamental requirement for DJs. You can effortlessly switch between 33 and 45 RPM or fine-tune the variable speed ratio to match your creative needs. This adaptability extends to layering recordings over existing loops- for instance, playing back a beat loop at your chosen speed and overlaying scratching sounds on top. The Handytraxx Play's looper opens new possibilities for musical expression, offering endless opportunities to innovate and perform.

Precision craftsmanship

Every component of the Handytraxx Play has been crafted for superior performance. The custom-designed tonearm offers high-level tracing performance, minimising needle skipping during playback and scratching. A belt-driven motor with digital rotation correction ensures stable platter rotation and quick recovery for incidental effects that sound natural. Refinements to the turntable mechanism further reduce skipping, allowing for consistent, reliable performance during even the most demanding scratch play.

Groove on the go

Designed for ultimate portability, the Handytraxx Play can be powered by the included AC adapter or six AA batteries, giving you the flexibility to take your music anywhere. The built-in 2.5W speaker delivers impressive sound with rich bass and clear playback, whether you're connected to external speakers or not.

Flexible customisation

A redesigned headshell supports both ceramic and MM cartridges*, offering flexibility for various playback styles. Users can replace the scratch fader or reorient the control panel for right- or left-handed use, ensuring comfort and adaptability for every DJ. These thoughtful customisation options make the Handytraxx Play a truly personal and versatile tool, perfect for creating and performing.

* Basic soldering skills are required for replacing ceramic and MM cartridges.

Specifications

Drive system: Belt-driven (with digital rotation correction)
Drive motor: DC servo motor
RPM: 33-1/3, 45 or 78 revolutions per minute
S/N (signal-to-noise) ratio: Less than 60 dB (DIN-B)
Cartridge model: Stereo ceramic cartridge included (MM supported)
Maximum input level: AUX IN: 2.5 Vp
Maximum output level: LINE OUT ? 2.3 Vp, THD 1%, PHONO OUT: 300 mV (1 kHz, 5cm/sec)
PHONO preamp gain: Standard value: 34.5 dB; equalizer characteristics: RIAA
Digital signal processing
A/D, D/A: 44.1 kHz@16-bit, stereo
Crossfader: 44.1 kHz, 32-bit float, stereo
Mix: 44.1 kHz, 32-bit float, stereo
Looper: 44.1 kHz, 16-bit, stereo; max. recording time: approx. 20 sec
Filter: 44.1 kHz, 32-bit float, stereo; type: OFF, FILTER1, FILTER2, FILTER3
Delay: 44.1 kHz, 32-bit float, stereo; feedback (0%-80%), time (1,000 ms-10 ms)

Power consumption: 2.35 W
Power supply: AC adapter (included), six AA batteries (alkaline or nickel-metal hydride) Weight: 2.3 kg/5.07 lb
Dimensions: 370 x 280 x 84 mm/14.57? x 11.02? x 3.30?; with cover on: 370 x 286 x 87 mm/14.57" x 11.26" x 3.43"
Included items AC adapter, AC adapter replacement plug (5 types), dust cover, slip mat, EP adapter, Quick Start Guide

Notes: Exceptional value here. Cre8's analogue drum machine is based on Pittsburgh Modular audio circuits, offering true old-school-inspired drum synthesis and hands-on control at an excellent price.

Supplier's notes:
Introducing Boom Chick, a revolutionary analogue drum machine built on the warmth and character of Pittsburgh Modular's newly designed analog drum circuits. These powerful, expressive percussion voices are paired with an advanced sequencer designed for intuitive creativity and deep rhythmic exploration. Inspired by the hands-on performability of iconic analog drum machines, Boom Chick redefines analogue percussion with exceptional flexibility and sonic precision, tailored for modern musicians and producers.

Compact yet incredibly powerful, the Boom Chick ensures frustration-free jamming and tweaking through its intuitive knob-per-function layout and straightforward interface conventions. It's hands-on, immediate, and built for musicians who want a drum machine that feels alive. Turn up the dirt, push the limits, and make some serious noise.

Created by the Pittsburgh Modular Synthesizers team, Boom Chick features five meticulously crafted drum voices, each designed for maximum flexibility and expressiveness. The sounds are raw, dynamic, and laser sharp, built to drive and slice through any mix. The electricity creating the analog sounds is directly shaped using the knob-per-function interface. No menus, no hassle, just pure, tactile beat-making analogue magic at your fingertips. By focusing on creative, new analogue designs, Pittsburgh Modular ensured that Boom Chick doesn't just mimic the past, but kick starts a new future of analogue beats.

Every voice has been meticulously engineered for maximum sonic impact, making Boom Chick a true drum synthesizer, not just a drum machine. Starting with a massive bottom end, the Kick drum sculpts a specialized sine-wave oscillator using gritty overdrive, pitch manipulation, and a precise, percussive envelope allowing you to dial in everything from low and long or clean and punchy rhythms to aggressive, overdriven beats. The Snare drum showcases the power of modern analog with powerful snare hits that can mimic a physical snare drum or venture into creative new territories. Drum channels 1 and 2 offer even deeper sound-design possibilities. By utilizing two oscillators, wave shaping, frequency modulation, and noise you can generate everything from subtle nuanced percussion to wild, expressive sonic textures. Toms, claps, snares, kicks, cymbals, rim shots, cowbells, congas, claves, space sounds, and outer space sounds can all be dialed in and reimagined. Hats utilize a custom oscillator noise matrix to create crisp, bright metallic tones ideal for intricate rhythmic patterns.

Boom Chick's sequencer is designed to offer profound depth while maintaining intuitive simplicity. It features two powerful modes: Step Mode, for meticulous programming of each drum step, and Live Mode, allowing real-time rhythm creation and expressive performance. Tools such as Step Shift enable quick and precise timing adjustments for intricate rhythmic patterns, while Step Roll and Chance introduce engaging complexity and variation. Timing functions like Humanize, Swing, and Quantize provide refined control over groove and rhythm, allowing for perfectly locked or naturally loose-feeling sequences. Swing adds groove by shifting even steps slightly behind the beat, while Humanize introduces subtle timing variations to simulate natural playing styles. With up to 64-step sequences and polyrhythm capabilities, Boom Chick encourages experimentation by removing the boundaries to live performance and making beats.

At the heart of Boom Chick is a 6-track sequencer that gives you deep rhythmic control while staying easy to use. With design inspiration taken from Pittsburgh's Voltage Research Lab 2, Boom Chick's sequencer will take you from quick jams to mind-bending polyrhythms. This sequencer is not only designed to keep up with you, but also propel you to new territory.

Boom Chick is modular-friendly, MIDI-capable, and performance-ready. This makes it a perfect addition to any studio or live rig. Individual trigger inputs and individual drum outs allow each drum to be sent to a mixer or DAW separately for external processing or recording. MIDI in and out to send and receive clock, trigger drums, or sequence external percussion. Analog clock in and out allows Boom Chick to easily integrate with Eurorack setups and other gear. Separate Line and Headphone outputs make personal jams, recording, or live performances easy.

Notes: The OPT90 cassette speaker blends retro aesthetics with quality and portability - Bluetooth-compatible, lightweight and compact, and capable of 6 hours of continuous playback at full volume. An ideal choice of portable speaker anyone would enjoys a more nostalgic aesthetic. The cassette case can be used as a stand which when closed can change the sound quality, lending the music a more classic, lo-fi touch. The OPT90 is also compatible with SD cards.

Notes: MicroLab mk3 is designed for today's modern creatives. Its ultra-compact form factor, high-quality keybed, and intuitive controls make it the perfect MIDI controller for producers working in small studios, on the go, or just starting their music production journey.

With a durable, lightweight design and plug-and-play USB connectivity, MicroLab mk3 fits seamlessly into any workflow - empowering you to start making music instantly. Enjoy complete integration with leading software including Analog Lab Intro and Ableton Live Lite, and extend your creativity with features like chord mode and dual touch strips for expressive performance.

Small, lightweight, durable, and USB-powered - ideal for mobile music-making and compact studio setups.

With a high-quality slim keybed, MicroLab mk3 delivers a responsive and true playing experience that your music deserves.

MicroLab mk3 delivers big sound with 500 curated presets from Analog Lab Intro, intuitive control via four buttons and two touch strips, and instant music production with Ableton Live Lite.

Its plug-and-play USB connectivity and intuitive features ensures you can start creating music right away - no hassle, no setup.

Main Features

High quality keybed

25-note velocity-sensitive slim keyboard, responsive and expressive.

Controls

2 touch strips for pitch bend and modulation, 4 control buttons for octave shift and navigation

Smart features

Chord Mode - Play full chords with a single key
Hold function
Octave up and down buttons
Semitone transpose

Software integration

Seamless compatibility with all major DAWs and soft synths.
Analog Lab & V Collection browsing - Explore 500 curated sounds instantly.

Included Software titles & services

Analog Lab Intro - 500 sounds from iconic synths and keyboards.
Ableton Live Lite - Essential tools for recording and producing music.

Connectivity

USB-C powered for instant plug-and-play operation.
MIDI class-compliant - Multiclient MIDI driver for Windows.
Compatible with iPads & Android devices (via adapter).
Sustain pedal input - Connect a sustain or expression pedal for enhanced performance.

Size & weight

Size (mm): 406 x 39 x 125 mm
Size (in): 15.98 x 1.54 x 4.92 in
Weight (kg): 0.62 kg
Weight (lb): 1.37 lb

Review: Experience Pearl Jam's Binaural like never before. In honour of the 25th anniversary of the album, dive into its world with the spatial audio Blu-ray. Feel every note and lyric of tracks such as "Light Years" and "Nothing As It Seems" wrap around you in a way that's beyond amazing. Whether you're reliving the memories or discovering it anew, it's time to let the music take over.

Single Blu-ray disc contains Spatial and Hi-Res stereo mixes.

Notes: Excellent value all-rounders from Rode, the NTH-50s offer precise, detailed sound to match their slick, stylish looks. Custom 40mm drivers and ergonomic design provide a nice combination of sound and comfort.

Supplier's Notes:
The NTH-50 professional on-ear headphones combine exceptional sonic performance, superior comfort, and a sleek and durable design that make them the perfect companion for DJs, music producers, content creators and audiophiles. The custom driver array features a revolutionary acoustic design with an innovative resonant chamber, and is precision-tuned for incredibly accurate and detailed audio reproduction with ultra-low distortion. Not only does this result in a more natural sound signature than other on-ear headphones, but it also offers superior external noise isolation. To minimise wearing fatigue and ensure optimal comfort, they feature a contoured headband and an ergonomic earcup structure to reduce pressure on your head and ears during longer sessions. With a lightweight, compact design combined with premium materials and a rugged build, the NTH-50 headphones are with you for the long-haul, ready for the rigours of the road and the studio alike, day in, day out.

Acoustic & electrical specifications

Transducer Size: 40mm
Transducer Type: Dynamic
Operating Principle: Closed
Ear Coupling: Supra-Aural/On-Ear
Frequency Response: 5Hz - 35Khz
Impedance: 32 O
Sensitivity @1mW / 500Hz: 102 dB SPL Sensitivity @1V (RMS) / 500Hz: 117 dB SPL
Total Harmonic Distortion @1mW: < 0.2 % @100Hz < 0.03% @500Hz
Total Harmonic Distortion @100Hz: 0.05% @100dB SPL 0.5% @120dB SPL
Short Term Max Input Power: 100 mW
Long Term Max Input Power: 50 mW
Max SPL: 124 dB SPL
Ambient Noise Attenuation: 21 dBA
Connection Type: Dual TRRS Cable Attachments

Mechanical specifications

Weight (grams): 220
Cable Length: 1.7m coiled cable
Included Accessories:
1 x Headphone Cable
1 x 3.5mm to 1/4-inch Adaptor
1 x Storage Pouch
1 x COLORS ID Set

What's in the box

1 x NTH-50 Headphones
1 x Storage Pouch
1 x Headphone Cable
1 x COLORS ID Set
1 x 3.5mm to 1/4-inch Adaptor

Notes: The OPT90 cassette speaker blends retro aesthetics with quality and portability - Bluetooth-compatible, lightweight and compact, and capable of 6 hours of continuous playback at full volume. An ideal choice of portable speaker anyone would enjoys a more nostalgic aesthetic. The cassette case can be used as a stand which when closed can change the sound quality, lending the music a more classic, lo-fi touch. The OPT90 is also compatible with SD cards.

Notes: Polyphonic sequencing from Elektrofon, the Klang allows you to program and perform chords and multi-layered harmonies. Circular clock-style display gives visual feedback and real-time indication of chord progressions.

Supplier's Notes:
«Klang» is a 4 voice polyphonic controller. It stores, traverses and manipulates chord progressions.

Overview

«Klang» is a unique take on polyphonic control within Eurorack.

Displaying chords in a circular clock-like display, and giving the user immediate control over every aspect without "menu diving" makes for an easy to use and inspiring module.

The module can store up to 99 chords, where each chord is made up of 4 voices.

Each voice is represented by a colored indicator on the clock-face which in turn is controlled by an encoder.

The indicators points to notes on the chromatic scale drawn in 360- around the clock-face.

Interface

The big grey encoder in the middle of the module lets you browse the chords - the active chord and total chord count is shown just above the encoder on the display.

The + button lets you ad a new chord. The new chord is added after the currently active chord, and the new chord is then set as the active chord.

The - button removes the current chord.

Inputs

The module has 3 inputs - 1 trigger input and 2 bipolar CV inputs.

Trigger input

The trigger input triggers a chord change.

If the direction input is unconnected, a single trigger results in a single step in the forwards direction.

Direction input (+-5V)

The direction input normalizes to a single step in the forwards direction.

You can feed this input a bipolar CV (+-5V).

Direction maps the total chord count to 5V. This means that +5V results in a single trigger progressing +n steps, where n is the total chord count.

A negative voltage will do exactly the same but resulting in backwards stepping.

0V equals no movement.

Transpose input (+-5V)

This bipolar CV lets you transpose the current chord up or down within 1 octave.

It is therefore a 5V/oct input.

The reason for this is that it is intended to be used with an analoge voltage source like the Pressure Points from Make Noise, or any other analoge sequencer.

It is much easier to fine tune a 5V/oct signal with a regular potentiometer than a 1V/oct signal.

Outputs

Each voice has a separate color coded 1V/oct CV output.

Notes: The original SSL 2+ interface raised the bar by delivering a level of performance never seen before in its class. SSL 2+ MKII builds upon the success of its predecessor, with a series of significant enhancements and carefully curated feature additions. Designed for musicians, producers and engineers who demand the highest standards in sound quality, SSL 2+ MKII provides unmatched audio performance and a user-friendly design that caters for both those starting their creative journey and seasoned professionals.

The SSL 2+ MKII is equipped with two high-performance SSL-design microphone preamps delivering a massive 64 dB gain range, in conjunction with class-leading 116.5 dB dynamic range and -130.5 dBu EIN. The mic pre's can also operate in LINE mode for connecting synths or INSTRUMENT mode for connecting guitars/basses.

Located on the rear of the SSL 2+ MKII are four balanced outputs for connecting your studio monitors, rackmount kit, FX pedals, and more. With professional-grade outputs, the SSL 2+ MKII delivers 120 dB dynamic range, allowing you to hear every detail in your productions - from the most subtle riff to the deepest bassline. All outputs are DC-coupled, enabling you to send CV (control voltages) to synthesisers.

The SSL 2+ MKII features independent headphone outputs conveniently located on the front panel. These re-engineered outputs (featuring high-current NJM headphone amps) are capable of driving any type of headphones. Now boasting a jaw-dropping 119.5 dB dynamic range (MK I previously 111 dB), you have all the performance and clarity needed for accurate monitoring in any environment. SSL 2+ MKII allows you to create separate mixes for the artist and engineer.

The SSL 4000 series consoles (often referred to as '4K') are renowned for imparting a unique 'mojo' to sounds and instruments that pass through them. This mojo comes from multiple stages of harmonic distortion from compressor VCAs, VCA faders, and other crucial components such as the transistor mix amps. Using modern components, SSL has developed a circuit that distils the two essential characteristics of the 4K sound into a single design. Legacy 4K Analogue Enhancement injects a controlled amount of finely-tuned, sweet-sounding harmonic distortion and a 'forward' yet musical high-frequency EQ boost into the signal path, giving your sound the 4K mojo and presence that artists and engineers have loved for decades.

Front-access jack sockets provide convenient access to 2 instrument DI inputs and 2 independent headphone outputs. On the rear, SSL 2+ MKII provides Neutrik XLR Combo sockets for Mic/Line inputs, four balanced outputs, 5 pin DIN MIDI I/O and the USB connector.

Whether it's the professional-grade mic preamps, Neutrik XLR and jack connectors and Alps pots, or the exceptional level of performance delivered from next-gen converters - all SSL products, including SSL 2+ MKII, offer pro studio quality, from the front to the back. The MKII range of interfaces feature updated switches on the front panel with status LEDs so you know exactly how your device is configured when recording.

High-quality audio conversion is essential for artists and engineers alike and the SSL 2+ MKII is built around Next-Gen 32-bit 192 kHz Converters. The result? Clearer, more detailed recordings, preserving every nuance of your performance. Capture stunning acoustic performances, record drum machines and synths with more punch and texture. Make your live streams sound like professional broadcasts and mix quicker and easier as sounds are more defined.

Whether you are recording a podcast, live streaming via social media, or performing karaoke online with friends, SSL 2+ MKII is equipped with all the tools you need to make content with amazing sound. Class-leading mic preamps allow you to capture every nuance of your conversation or voiceover. The built-in Loopback functionality ensures your audience hears virtual guests or system audio with ease.

With dual professional-grade headphone outputs, SSL's next-gen converters and punchy mic/line inputs, you can capture sounds in all their detail and create music which stands out from the crowd. The SSL 2+ MKII interface is your production sidekick in the studio, and when combined with the SSL production Pack gives you everything you need to make professional quality music.

Notes: Rack power bringing 2.5A (2500mA) on both the +12V and -12V rails. There is a 5V rail, but it pulls from the +12V rail, up to 750mA. So only use the +5V rail if you have to.

Comes with 12-position flying bus cable and wall power supply. The wall power supply is the same unit as After Later Audio use on their cases, so there's plenty of headroom and you don't have to worry about memorizing which amperage is for which.

This should be roughly enough for 2 rows of modules in a 104hp case. If you just need power for 1 row, check out our Warp Drive module.

Notes: The Four to One Mixer is the final docking station for all of your diverging sonic journeys! A simple and compact 4 channel mixer with independent level controls and selectable phase for each channel. This was primarily designed to be used with the One to Four Splitter to create 4 parallel signal paths, but it can be used just about anywhere you need to mix four different sources into a single output with your unique sound!

This high headroom device features a high 1 M Ohm input impedance and a low 100 ohm output impedance ensuring all signals maintain their sonic integrity throughout their journey, even on long cable runs. The high headroom input impedance of this device allows it to accept a variety of instruments without distortion or clipping. This was built to handle just about anything, including guitars, basses, synthesizers, drum machines, and more!

Phase selector switches for each channel will make sure to correct any issues you might have from mixing multiple different signals with opposing polarities. Sometimes mixes can sound out-of-phase, leaving the resulting signal sounding thin or tinnier. Adjusting the Phase on the Four to One Mixer will help you avoid these issues. When used in conjunction with the Four to One Splitter or the Flexi Loops, you can create wild parallel signal paths at the flip of a switch! Use it to mix 4 instruments into one amp! Run four synths into a single channel! Put the whole band through your wall of amps! The possibilities are still nearly endless.

Phase: Use this to select the output phase of the channel. Sometimes other pedals and various instruments will invert the phase of the signal which causes major problems when mixing with other non-inverted signals. If you have a signal that is inverted, flip the phase switch to "-" and the polarity will be corrected. In most cases this switch should stay in the "+" position.

Level: Adjusts the output volume of the channel.

Dimensions

4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw

50 mA

Input Impedance

1 MO

Output Impedance

100 O

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. EQD always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!