Flash Sale April 2025

Notes: A passive module to allow easy connection from Modular to Eurorack, avoid flimsy hook probes or alligator wires with a robust connection that will keep your signal intact.

Features:

3.5mm jack to BNC including 50O male-male cables.
Ships calibrated set to 10x as default, user's can select 1x but soldering a smd jumper.

Specs:

4HP
15mm deep
Passive

Notes: Control Eurorack using your breath with this unique module from ADDAC. A melodica pipe connected to the front panel allows you to generate two independent CV signals from breath inputs. Funky.

Supplier's Notes:
This module expands ADDAC's line of expressive controls, it follows the heritage of wind/breath controllers with one major difference, the pipe has no air escape creating pressure inside the tube controlled by the user's mouth. For a seasoned woodwind or brass musicians this working principle may sound unorthodox, however this way pressure can be controlled for longer without the need to breath in or learning circular breathing techniques. It's relatively easy to control the pressure in your mouth while still breathing through the nose.

The module is provided with a standard melodica pipe which connects to an air filter (providing a receptacle for condensation to form and isolate the sensor) and lastly connects to the module frontpanel.

The signal captured by the sensor is then sent to two independent sections with exactly the same functions as seen in the signal flow diagram below.

As an example the two sections can be used with different settings to independently control the VCA and VCF of any standard analogue voice patch.

Pipe

ADDAC are using a standard Melodica pipe into an air filter that will keep condensation away from the sensor. The air filter is then connected to the frontpanel sensor input using a silicone tube.

Sensor calibration

[RESPONSE] is the main control to calibrate the pressure curve, the knob goes from exponential to logarithmic with linear at 12 o'clock. Exponential will be more reactive to high pressures, logarithmic to lower pressures.

Hold function

This feature allows to hold the current voltage value with the hold is engaged (button led on), the state can be changed either by the push button in a latching manner (push to change state) or via the gate input in a momentary manner (hold on while gate is on)

Extra Pipe

Extra Pipes are available separately.

Tech Specs:
10HP
4.5cm deep
70mA +12V
40mA -12V

Notes: Most musicians use their feet as an extension of their playing, either pushing piano pedals, sustain pedals, guitar pedals.

However, feet have been underrated while using modulars. In the past ADDAC released a series of modules using sustain and expression pedals for triggering or controlling signals to help breaking the ice. While these are small and still useful for simple uses, ADDAC wanted to create something more specific this time.

This new solution features 5 footswitches and 5 inputs for external expression pedals with independent controls for each.

The aim was to save HP rack space and so created an external floor pedal with all the footswitches and controls, keeping the module HP to the minimum possible featuring only the 10 outputs and the connector to the external floor pedal.

There are many expression pedals in the market and although the most common one is the TRS pedal there are 2 other standards: RTS and TS.

All five ADDAC311 inputs expect TRS pedals, if you're looking into buying one choose a TRS pedal.

If you already have other pedals channel 4 features jumpers that can be switched in order to be used with a RTS pedal.

Channel 5 features a jumper that can be switched in order to be used with a TS pedal.

External expression pedals are required for their outputs to work.

External expression pedals are not included

Notes: Really nice stuff here. The filter circuit from ADDAC's 4 Voice Cluster module gets reimagined as a multi-mode stereo or dual mono filter module. A lot of filter action in just 6hp.

Supplier's Notes:

While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V

Notes: ADDAC711 is a dual channel Isolated DI box and is all about keeping the sound coming into your Modular free from any undesired noisy interferences, making sure that what you're getting from your inputs is what your external hardware is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 711 circuit is designed around a unity 1:1 type Low-cost Audio Transformer operating in the 20 Hz to 20 KHz range, this impedance matching transformer provides two fully balanced outputs (via XLR connectors).

There are two independent channels on the module with:
Audio Output
Signal overload warning led
LIFT/FLOAT/GND toggle switch
Gain control
XLR Input

The LIFT/FLOAT/GND 3-way switch lets you choose between lift, ground or floating ground. In the LIFT position (left) the module circuit will be "lifted" to ground through a 100R resistor and a 10nF capacitor. In the FLOAT position (middle) Ground will not be shared leaving ins and outs grounds completely apart from each other fully isolating both signals.
In the GND position Ground will be shared between inputs and outputs, here no isolation is used. Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the external hardware. Try out which one of these options will work best in any given situation.

The importance of using Audio Transformers

Applying a transformer balanced input isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and cleancircuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, this module presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate ADDAC711 from any other device, preventing hum problems coming from an outsider ground. Being a low-cost transformer the frequency response curve is not completely linear, still the -0.2dB
attenuation at 50Hz feels negligible.

Notes: Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.

Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.

4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.

For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.

The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.

It can be used for both Audio or CV Signals.

Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V

Notes: ADDAC809 is a dynamic CV operated I/O router that allows one source (Audio or CV) to be routed through 2 different chains (of one or more modules) before being sent to an output.
Six routing patterns are allowed:

1. IN > OUT
2. IN > CHAIN A > OUT
3. IN > CHAIN B > OUT
4. IN > CHAIN A > CHAIN B > OUT
5. IN > CHAIN B > CHAIN A > OUT
6. IN > > OUT
A practical example is to have an audio source, a delay and a looper.
And the question: should the delay be placed before or after the looper? Sometimes you may need the delay to be before the looper as you may want to sample the audio with the delay or sample the pure audio source and apply the delay afterwards.
This small utility module solves this issue on the fly without having to repatch anything.

INPUTS & OUTPUTS

TO CHAIN B: Connect to your Chain B input
FROM CHAIN B: Connect to your Chain B output
TO CHAIN A: Connect to your Chain A input
FROM CHAIN A: Connect to your Chain A output
INPUT: Connect to your Input Source
OUTPUT: Connect to your Output Source

ROUTING PATTERNS

There are 2 ways to address the six routing patterns:

Buttons: using the frontpanel push buttons and/or dedicated trigger inputs to latch between 2 states.
BYPASS: Chooses between Pattern 1 and any other pattern
PARALLEL: Chooses between Pattern 6 and any other pattern
ORDER: Chooses the order A before B or B before A
DUAL/SINGLE: Chooses to use a Dual (A>B or B>A) or Single chain (A or B)
CV: The dedicated CV input expects a 0 to +5v input and allows to jump to the precise routing pattern using a specific voltage interval in increments of approx. 0.83V:

Pattern 1: 0v to 0.83v
Pattern 2: 0.83v to 1.66v
Pattern 3: 1.66v to 2.5v
Pattern 4: 2.5v to 3.33V
Pattern 5: 3.33v to 4.16V
Pattern 6: 4.16v to 5V

Tech Specs:

Width: 12 HP
Depth: 55mm
Current: 80mA +12V / 30mA -12V

Notes: The CVADDER-HQ is a precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.

The module offers four CV inputs where three of them are summed, and the CV at the fourth input is subtracted - meaning "transposition downwards".

This module also allows transposing the incoming CV by one or two octaves or a variable offset by buttons.

A separate output provides the voltage of the internal transposition (+1, +2 octaves / free).

If the transposition buttons are not necessary and you prefer to have a dual precision adder, take a look at the 2CVADD-HQ module.

Notes: This module offers a four-quadrant-control for CVs via its joystick.

The module can act either as CV source at its four outputs, or as four-quadrant attenuator for the CV inputs. Beyond this, a mix of the input CVs according to the joystick position is provided separately.

Another feature is a gate output that is controlled by pressing the joystick handle.

The joystick remains in each position - there is no automatic "return to centre".

The JOYSTICK module can operate in two different modes:

Quadrants independent: In this mode, all outputs are zero when the joystick is in centre position
Overlapped: In this mode, each quadrant output fades from full to zero over the whole range to the opposite corner.

Together with a quad VCA / mixer (available soon from tangible waves) you can use the JOYSTICK also for mixing/blending four independent audio sources.

Notes: Channel extender for MIXCONSOLE.

This module extends the MIXCONSOLE module with three additional channels; the channel level can be controlled via CV here, too. If no CV is attached, the level knob works as usual volume control.

Notes: The GALACTAVISE is Allpedal's flagship compressor. Built with the musician's needs in mind, it boasts an uncompromisingly sweet compressor circuit with a Mix control for dialling in that perfect balance of compressed tone and clean tone.

The top end can often be make or break with many compressor circuits, so AllPedal also added the ability to adjust just the right amount with the Presence control. Made with the highest quality components for a low noise floor and road-worthy durability.

Let the GALACTAVISE blast your tone into orbit!

GALACTAVISE is the best guitar compressor pedal for musicians seeking to balance their sound's dynamics. As the best compression pedal on the market, it allows guitarists to control their volume levels efficiently, ensuring a consistent sound output. This guitar compression pedal is an essential tool for both studio recording and live performance.

As with all their effect pedals, AllPedal took special care in the GALACTAVISE's aesthetics with its finish, sophisticated artwork and anodized knobs.

GALACTAVISE is proudly made by hand in Paducah, KY in the USA using the latest cutting-edge technology in the pursuit of ultimate tone.

Notes: Gritty drum voice module based on new old stock Yamaha FM synthesis chips, also capable of a decent range of synth tones. User-friendly knobby interface with a decent range of CV inputs for modulation.

Supplier's notes:
'Akemie's Taiko' is an authentic complete FM synthesis based drum voice created using original Yamaha IC's. It builds on the same technology used in the mighty Akemie's Castle but in a more complete triggered voice form featuring both signal generation and envelope shaping.

The module provides CV and direct control over a number of FM parameters including algorithm selection, operator release envelopes, ratios, waveforms & feedback. This gives a massive range of unique sounds.

The voice is able to track 1 volt per octave allowing it to be used for melodic lines as well as percussion. Also optional 'frequency ramps' can be enabled for additional audio effects.

The drum voice includes a trigger input as well as accent and choke trigger inputs to add further expressive and rhythmic control.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: The PULSE case is the perfect case for your Akai APC64: an ideal travel solution for mobile producers and musicians.

PULSE cases are made of rigid moulded EVA material that is durable and lightweight, while providing excellent protection. The 100% premium materials include a ballistic nylon exterior, super-soft velvet interior, and an ultra-smooth zipper.

With a spacious storage pocket for cables, and a comfortable handle, this case comes equipped with all the features you'll need for travel. Ultra-compact and totally flat, it can also pack easily into your backpack, carry-on, or a larger flight case.

PULSE Case For Akai APC64
Perfect fit for the Akai APC64
Rigid moulded case that provides excellent protection
Super-soft velvet interior and spacious pocket for cables
Compact and lightweight

Specifications

Perfect fit for your Akai APC64
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Exterior Dimensions: 17.90 x 13.20 x 2.00 Inches

***Please note: the APC64 is not included, it is shown in the pictures for demonstration purposes only. ***

Notes: Like a greatest hits of recent Analogue Solutions synths, the Ample combines sound elements from the Fusebox with jack patch points, a patch pin matrix, plus sequencer and CV touch pads from the Generator, creating something new and unique.

Supplier's Notes:
Ample combines the best elements of several of Analogue Solutions' recent products.

The sound elements of Fusebox
Jack patch points of Concussor Eurorack
Patch pin matrix of Vostok
Echo from Dr Strangelove
Sequencer and CV touch pads of Generator

It shares all this yet still has its own sound!

Ample can be as complex or as simple as you want it to be

This synth has been given a large and diverse number of controls, that along side the patch sockets, will give even the best and experienced synthesist endless possibilities.

This synth presents the controls in a user friendly and familiar synth layout that, together with this manual and other resources, enable even the new guy to get great sounds.

Synth - Percussion - Audio Processor

Ample is a compact analogue synthesizer. Analogue - as in really analogue. Aside from the MIDI chip (which has to be digital), everything else is totally analogue using real transistors and op-amps. There are no CPU stabilised and quantised circuits, no DCOs, no digital LFOs and no digital EGs, as found on other so called analogue synths. The circuitry is based on designs dating back to the mid-1970s. So Ample has a genuine old sound.

Circuits included

3x Analogue Oscillators

There are three analogue VCOs - each providing a wealth of features and modulation choices. VCO3 can easily be utilised as a LFO.

2x Analogue Low Frequency Oscillator

LFO2(/Sync) has a triangle wave output. VCO3 can be used as an LFO and has Saw, Triangle and Square wave modulation signals.

Analogue Filter

Ample uses a four pole 24bB per octave low pass filter.

Analogue Amplifier

The VCA can be set to THRU so it is always 'open'. This allows Ample to be used as an effects processor.

2x Analogue Envelopes

There are two EGs - each having full control over ATTACK, DECAY, SUSTAIN, and RELEASE.

Modulation

Great thought has been placed into modulation route choices, allowing a wide range of sounds to be produced, including percussion and 'modular' sounds further extended by patching with the jack sockets and pin matrix.

MIDI

MIDI is intentionally kept simple - so you can concentrate on making new sounds and making music - not getting tied up with SYSEX programming.

You get the all important control over filter cut-off using MIDI Velocity.

Patchable External CV Control Sockets

Ample has many input and output audio and CV sockets - to allow the synth to be effectively re-wired to make new sounds.

The sockets also enable it to be easily used with Eurorack and other modular systems. They can be patched together.

Sequencer

Ample has a vintage style 16 step sequencer.

Touch Keys

There are 6 touch keys that each output a set voltage. Use this to play the pitch or as modulation signals. A great tool for inspiration!

Pin Matrix

A neat way to patch the synth.

Echo

Nice lo-fi echo / delay.

Notes: Make your professional audio devices Bluetooth compatible with the ART BT-DI, a rugged and flexible Bluetooth Audio DAC. The BT-DI is designed to provide a reliable Bluetooth interface from computers, phones, and legacy Bluetooth devices to any installation. Working as a remote extension of your mixer and mic outputs, the BT-DI utilizes phantom power, so an external power supply is not required.

Key Features

Bluetooth 5.0 receiver
External antenna for long-range operation
Transformer isolated XLR outputs
Headphone out
Selectable fixed/external USB supply OR Phantom Power
Headphone can be summed Mono
Compact rugged package, extruded chassis
Designed and developed in the USA

Specifications

Main Output Connections: XLR (2) main output, transformer coupled, switchable ground.
Main Output Impedance: 300 Ohms.
Maximum Output Level: 30 dBu balanced Main output, 0 dBu Headphone output.
Signal to Noise Ratio: -90dB unweighted typical.
THD: <0.05% typical
Bluetooth Version: 5.0, up to 50m, Class 2 device (BDR/EDR)
Supported Audio: CODEC's SBC, AAC
Power Requirements: 5V USB (80ma) or +48V
Phantom power w/both XLR's connected.
Dimensions (H x W x D 1.6-inch x 5.0-inch x 5.5-inch (36 x 126 x 140 mm)
Weight: 2.0 lbs. / 0.91 kg

Notes: Everything you need from a hardware pre-amp. Clean and clear transistor amp or warm and juicy valve amplification, suitable for any mic or sound source. Top quality stuff at a great price.

Supplier's Notes:
The Solo MPA Multi-Voice Tube Preamplifier allows users to blend between a pristine low-noise/low-distortion solid-state transistor circuit and a warmer Class-A tube mic preamp.

The flexible EQ controls allow users to voice the Solo MPA to create their signature sound. Featuring 48V phantom power and a variable input impedance control, users can tailor the Solo MPA to suit their microphone of choice, be it a high-quality dynamic, a studio-grade condenser, or a low-level ribbon

The Solo Series of single-channel rackmount units have been developed for the recording enthusiast with a preference for simplicity.

Specifications

Frequency Response: 15 Hz to 50 kHz (+0, -1dB)
Dynamic range : >110dB ("A" weighted)
CMRR : >90dB THD <0.005% (typical
Equivalent Input Noise: -129dBu (XLR, "A" weighted)
Maximum Input Level : +19dBu (XLR)
Maximum Instrument Input : +17dBu
Input Impedance: 600-80K ohms adjustable (XLR), >800k ohms (Instrument), +27dBu (XLR)
Output Impedance : < 47 ohms (XLR)
Maximum Gain: 75dB
Meter Calibration: 0VU = +4dBu output (+4dBu mode) 0VU = -10dBV output (-10dBV mode)
Low Cut Filter : Single pole,10-200Hz adjustable
Tilt EQ: +/- 12dB adjustable
Power Requirements: 100-120V 60 Hz / 220-240V 50Hz
Dimensions: (HxWxD) 1.75-inch x 19-inch x 6.0-inch / 4.45 cm x 48.3 cm x 15.2 cm

Weight: 5.6 lb / 2.5kg
Box Dimensions: (HxWxD): 5" x 20.4" x 7.44" / 12.6 cm x 51.8cm x 18.9cm
Note: 0 dBu = 0.775Vrms

Notes: Chorda by Artiphon is a versatile, all-in-one musical instrument that combines the features of a guitar, piano, drums, and synthesizer - making it easy for anyone to create a wide variety of music. It's user-friendly, offering over 100 different sounds and touch-sensitive pads for expressive playing, ideal for both music enthusiasts and beginners.

An instrument built for you.

Chorda is the all-in-one instrument that adapts to the way you play. Whether you strum it like a guitar, play it flat like a piano, or hold it over your shoulder like a violin, Chorda will adjust to your style, making it the perfect instrument for both music enthusiasts and beginners alike.

Play every part of the song.

With Chorda's built-in synthesizer, you can easily create full songs by switching between the four instrument parts (Drum, Bass, Chord, and Lead) directly on the device. Each mode has unique capabilities, with hundreds of sounds to choose from.

Loop and layer.

Chorda's built-in looper lets you record and layer the four instrument parts, creating songs in seconds. Start with a drum beat, add a groovy bass line, throw in some angelic chords, and improvise a solo with a lead melody for as long as you want.

Adapts to the way you play.

Play Chorda like a guitar, flat like a piano, or hold it over your shoulder like a violin -- Whatever your style may be, Chorda will adjust to you.

Go beyond the touchscreen.

Use Chorda as a Bluetooth MIDI Polyphonic Expression (MPE) controller to take your production to new heights. Controlling your favourite music apps and software like Ableton, Garageband, Logic Pro, and more. You can even use MIDI to control your hardware instruments.

Smart playing modes

Chorda boasts a Strumable smart bridge, built-in arpeggiator, snap-to-grid and groove quantization, traditional set keys, an array of customizable settings, and effects to take your musical production to new heights!

Choose from hundreds of sounds.

Change sounds with the Artiphon Connect companion app. The app offers a diverse selection of over 100 sounds, drawing inspiration from various genres like Hip-Hop, EDM, Rock, and even traditional instruments such as violins and horns.

Or sample your own.

Create your own sounds and instruments with audio sampling in the app. Load them into Chorda, and it automatically adjusts to your chosen scale, allowing you to craft the perfect song with your own unique sounds.

On-the-go playing.

With Chorda's built-in speaker, onboard sounds, headphone jack, and rechargeable battery you can play anywhere creativity strikes.

Tech Specs

What's in the box?

Chorda
USB Cable
Quickstart Guide

Dimensions
440 mm (W) x 59mm (D) x 29mm (H)

I/O
USB-C (USB 2.0 Class Compliant Audio/MIDI)
3.5mm (1/8") TRS Analog Headphone Stereo Out

Features

Multi-coloured LEDs
12 capacitive sense/ touch-sensitive pads
Built-in accelerometer
Built-in Gyroscope
Embedded Haptic feedback
Smart-strum bridge with 6 triggers
(A) menu button
Power + volume button
Built-in battery (up to 5 hours of battery life)
MIDI Polyphonic Expression (MPE) Support

Bluetooth
Bluetooth LE MIDI (MIDI only)
Note: Windows 10 does not currently support Bluetooth LE MIDI

Speaker System
3W built-in active speaker system

Compatibility
iOS 11 and newer
Android 9 and newer
macOS 10.12 and newer
Windows 10 (64 bit)

Notes: Add an extra layer of protection to your Orba with our custom Silicone Sleeve. This flexible sleeve allows full access to buttons and cable ports and features a removable strap long enough to attach Orba to your wrist or backpack.

Notes: Unleash your creativity

Designed for seamless pairing with MiCreator Studio, the Satellite microphone unlocks powerful creative flexibility. Link Satellite and MiCreator Studio via the in/out ports to track an additional sound source or even achieve true stereo recordings and capture the energy of the moment. Satellite even works as a standalone mic and offers a headphone jack. Start recording how you want, when you want with Satellite.

Custom Condenser Capsule - Record in top notch audio quality
Max SPL: 130 dB SPL - Record even very loud sources
FlexTilt mechanic - Easily position the mic head for optimal recording
Full metal housing - Longlasting and durable
Headphone jack
Exchangeable & customizable face plates for an individual and personalized look

Technical Specifications

Directional characteristic: Cardioid
Frequency range: 20 Hz - 20 kHz
Max. SPL: 130 dB SPL
Weight: 220g
Dimensions: 100 x 60 x 28 mm

Notes: Turn your MiCreator Studio into a mobile content creation powerhouse with Y-Lav. Record multiple speakers simultaneously by tethering Y-Lav to your MiCreator Studio. And hear your audio in real time with onboard direct monitoring output. No matter what you create, make sure it sounds as good as it looks with Y-Lav.

Pairs seamlessly with MiCreator Studio to unlock powerful creative flexibility
Connected via the Link Connection (In/Out jack on the MiCreator Studio)
Record high-quality audio for video projects and more
Connect a second pair of headphones via the built-in headphone jack

Technical Specifications

Polar pattern: Omni
Connections: 3.5 mm / 1/8" TRRS, 3.5 mm 1/8" TRS Klinke
Weight: 30 g
Dimensions: 35 x 17 x 17 mm

Notes: Standard 3.5mm stereo plug to two RCA plugs lead. Ideal for connecting personal music players to line inputs

Notes: 3 Port Mini USB Type-C Hub

Add up to 3 devices to your laptop, PC or smart device with this simple 3 Port mini USB Type-C Hub. The compact, lightweight design makes it great for working on the move, expanding your laptop's USB Type-C port into a superspeed USB3.2 and two additional USB2.0 Type-A ports.

Instantly provides three additional USB Type-A ports to USB Type-C devices
Supports transfer speeds up to 5Gbps (USB3.2) and 480Mbps (USB2.0)
Simple Plug & Play installation
Compact, lightweight design makes it ideal for travel

Connector: USB 3.2 Type-C
Interface: 1* USB 3.2 and 2* USB2.0 Type-A Ports
Data transfer rate: 1* USB 3.2 = 5Gbps, 2* USB2.0 = 480Mbps
Dimensions: 55 x 24 x 20mm
Weight: 16g

Notes: USB 3.0 type-A plug to type-A socket extension lead. Ideal for extending existing connections used for syncing and charging superspeed USB 3.0 devices.

Simple extension lead for the latest super speed USB 3.0 devices
Backwards compatible for all previous USB versions
Supports data transfer speeds up to 5Gbps and charging at a reduced rate

Cable : diameter 4.5mm

Notes: USB 3.0 type-A plug to type-A socket extension lead. Ideal for extending existing connections used for syncing and charging superspeed USB 3.0 devices.

Simple extension lead for the latest super speed USB 3.0 devices
Backwards compatible for all previous USB versions
Supports data transfer speeds up to 5Gbps and charging at a reduced rate

Cable : diameter 4.5mm

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: 221.x2 is a clean and precise utility module that is equally at home mixing Control Voltage as it is audio. At its simplest, it is two independent 2-to-1 mixers that offer per-channel attenuation and inversion, as well as +6dB of gain available at the summed outputs. With a tap of the "All Mix" button, these separate mixes can be combined into a 4-to-1 mix at the "All Mix" output - meanwhile, the first 1+2 mix is still available at its respective summed output. A rear expansion input and output allows for combining multiple modules into larger systems.

In addition, each channel also offers a Direct Output that can be taken pre or post attenuation/inversion.

A 6-volt offset is normalled into the input jacks of channels 2 and 4. This voltage is available at the channel's Direct Output, as well as added to the mixed outputs. Useful as an offset for mixing with another CV signal, or simply as a voltage source.

Each summed output group has two blue LEDs for displaying the shape of the summed CV, and can also serve as signal present indicators for audio. Peak LEDs trigger at ~9.6V, allowing for a bit of headroom before things get out of hand.

Specifications:

Width: 10HP
Depth: 3.3 cm
Power: 133 mA @ 12V
129 mA @ -12V
Inputs/Outputs: All I/O is unbalanced
Input Impedance: 10 Mohms
Output Impedance: Mix Outputs: 330 ohms
Direct Outputs: 10 ohms

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Introducing SUM0, a voltage-controlled oscillator with expanded harmonic possibilities, in a Eurorack format.

The 4 classic waveforms are generated by a meticulously designed oscillation engine.

You can modulate its frequency and its pulse width thanks to its integrated LFO, capable of reaching audible frequencies to achieve expressive modulations with the simple touch of a switch.

Expand the voice of your system by creating complex waveforms and high harmonic content thanks to its output mixer. This mixer also has an input to integrate an external signal to the mix output.

Of course, all its parameters (FM, PWM, SYNC, V/OCT) are at your fingertips through its patch points on the front panel.

And of course, assembled with a load of passion in Bocuma's studio-workshop in Guadalajara.

Nerdy-specs:

22HP
+12V > 12mA -12V > 12mA

Notes: High pitched modern version of traditional wood blocks in a hard plastic resin material. Integral clamp and bracket facilitate attachment to various drum hardware.

Notes: A versatile overdrive pedal for guitar with separate Gain, Tone and Level controls. A wide range of tones are available from natural and open sounding mild drive tones to heavier saturated distortion with all points in between to cover different music styles.

Gain, Tone and Level adjustment
9V battery or optional DC adaptor operation
Power supply9V battery (PP3 included) or optional DC adapter
Construction: Aluminium housing with rubber base
Controls: Gain, Tone and Level
Dimensions: 115 x 68 x 47mm
Weight: 275g

In the box

The box for this item contains:

OD-50 guitar effect pedal
PP3 battery

Notes: Re-Built from the ground up - a complete redesign of the original Lo-Fi Delay.

Enter the realm of sonic exploration with Colortones LO-FI DELAY. Featuring three distinct delay voicings, the LO-FI DELAY is a grainy lo-fi, old-school analogue tape sounding dub style delay engine with momentary oscillation feedback and speed switching options.

At its core the LO-FI DELAY is a tempo synchronized dual channel delay with each channel having independent Regen and Time controls.

Controls include Delay Time, Regen, Feedback, Mix and a 'Splash' footswitch to momentarily send the delay into a predetermined amount of regenerative feedback and or Tempo Change.

The SPLASH footswitch also acts as a Tap Tempo control requiring at least 4 quick taps to calculate a new tempo.

Controls

Wet | Dry Switch

Wet Mode acts like a normal delay where the delayed repeats can be mixed against the Dry Signal with the decay time set by the Regen knob. When the SPLASH Footswitch is momentarily pressed the decay time switches to the Regen+ knob setting allowing for more or less regenerative delays while the footswitch is pressed.

Dry Mode is designed for running in a quite mode and only activating the delay while the SPLASH footswitch is held down. Great for adding dub style accents to certain stabs / phrases or adding splashes of ambient delay or moments of crazy feedback to an otherwise Dry signal.

Hi-Fi | Lo-Fi Switch

Hi-FI mode has a crisp hi-fidelity non-destructive repeated delay.

The centre and down positions are Lo-Fi modes where the resulting delay repeats are a little darker like a tape delay with a slight hint of mechanical tape warble. The Centre position uses a Lowpass filter in the delay feedback line where as the Down position uses a HighPass filter.

Division Knob

The Div knob sets the alternative delay speed when Splash is pressed while in Wet Mode. At 3 O'Clock Repeats are at Unity 1:1. Turning anticlockwise the repeats are Multiplied (Faster) in by either x2 or x3. Turning Clockwise from unity the repeats are divided (slower) by either 2 or 3.

Tech Specs:

True Bypass
Current Draw: 145mA
Input Voltage: 9V DC (center negative)
external power supply not included

Notes: With small synthesizers, where the knobs and controls are closer together, it's crucial to have a good working position.

This helps make small equipment more "usable" when integrating them into a setup.

For the Behringer Pro VS Mini, CoverUp Pro offer an ergonomic stand with two different angles: 20 degrees and 40 degrees.

Depending on your preference, you can choose between these two available options.

Each stand has rubber feet to prevent scratching or slipping.

*** Please note: The Behringer Pro VS Mini is not included, it is shown for demonstration purposes only. ***

Notes: ELK (Elektron Leveling Kit) is a set of stands designed to match the height and angle of various generations and models of Elektron devices.

The MK2 series (RYTM and A4) features an incline, while other current models such as Digitakt, Digitone, Syntakt, and Analog Heat are flat. Additionally, we include previous generations such as Machinedrum, Monomachine, A4, RYTM, and Octatrack in this list.

With these stands, the fronts of the synthesizers are aligned at the same height and angle, creating a seamless continuation of the equipment placed beside them.

Compatible with Analog RYTM MK2 and Analog Four MK2 DIGI Stand.

Compatible with Digitakt, Digitone, Syntakt, Analog Heat (MK1 and MK2), Machinedrum, Monomachine, A4 MK1, RYTM MK1, and Octatrack (MK1 and MK2).

Each stand has rubber feet on its bottom to prevent slipping or scratching on the supporting surface.

Kit includes: X1 MK2 + X1 Digi elevate stand

Notes: For the Blofeld & Pulse2 duo, Cover Up have developed a potential stand:

Dual Stand for those fortunate enough to own two units of this pair, this stand will be indispensable in your setup. With space for rear connectors. It saves space and enhances the working position.

*** Please note: the Blofeld/Pulse 2 is not included, it is shown for demonstration purposes only. ***

Notes: For the Blofeld or Pulse2 duo, Cover Up Pro developed a potential stand:

20 degrees Stand With a slight tilt, it improves posture, screen visibility, and access to its functions.

*** Pleas note: The Blofeld/Pulse 2 is not included, it is shown for demonstration purposes only. ***

Notes: Envelope with filter with serious attitude

This mangled, filter-sweeping, abruptly overdriving pedal is designed to respond to your playing. It syncs its wave-thumping movement with the force at which you play. It multiplies dynamics into a hyper-exaggerated frenzy. It adds just the right amount of movement to punch through the mix and it reacts to an external trigger of your choosing to follow your tempo. Six selectable frequency ranges mean you're always gonna have just the right quack and oomph for whatever's plugged in! The sounds are wild, the thump is thick, and the animation is deep.

Controls

Input: Plug an instrument in to this jack.
Trig: Plug another instrument in to this jack and use it to trigger the filter sweep.
Out: Connect this to the amplifier.
Sensitivity: Determines the point at which the filter engages and the frequency range of the filter shift in relation to the input amplitude.
Intensity: Simultaneously blends in the resonance, amount, and grit of the filter.
Vol: Adjusts the output volume of the DEEP ANIMATION.
Frequency Selector: Selects the frequency range of the filter.
Bypass: True bypass the effect.
Up / Down: Controls the polarity of the filter decay once triggered. UP sweeps the frequency from higher frequencies to lower ones and DOWN, the opposite.
Additional Features: There is a subtle light to indicate the external trigger behind the main bypass LED.

Specifications

Dimensions: 5.92" x 4.72" x 2.34" (including hardware).
Weight: 21 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 18 mA.

Notes: The Loupedeck Live S is an yet another innovative device that revolutionizes the way creators work with their digital tools. Whether you're a photographer, videographer, streamer or content creator, the Loupedeck Live S streamlines your workflow and enhances your creative process.

With a sleek and compact design, the Loupedeck Live S offers an impressive range of features, including customizable buttons, dials, and sliders that allow you to control your favorite software seamlessly. The device integrates with a range of applications, including Adobe Lightroom, Premiere Pro, and Photoshop, as well as other popular video and audio editing software.

To ensure that your Loupedeck Live S stays protected from the elements, Decksaver has created a custom-fit cover made from super-durable polycarbonate material. This cover is designed to protect your device against dust, spills, and accidental impacts, providing you with the peace of mind to focus on your creative work.

Not only does this cover offer superior protection, but it also adds a stylish touch to your workspace. Decksaver's team of experts has spent many hours researching and testing to ensure that their covers provide the highest degree of protection while maintaining the aesthetic appeal of your gear.

With a Decksaver cover for your Loupedeck Live S, you can keep your device in pristine condition, allowing you to stay focused on your creative vision without worrying about the safety of your equipment.

Get ready to take your creative workflow to the next level with the Loupedeck Live S and Decksaver!

Dimensions

Weight 0.15 kg
Length 15.3 cm
Width 8.9 cm
Height 3 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight

Notes: This is 40 cm (15.7 inch) long cable for connecting the DROID controllers controllers to your master. Its main purpose is to separate the controllers from the master at a longer distance.

You also can use this cable for connecting two of Der Mann Mit Der Maschine's multiples into a CV bus.

Notes: Audio Optimized USB-A to USB-B Cables

Dual slimline ferrites prevent signal dropouts
Gold connectors ensure long cable life
Available in 8 colours and 2 types

Ideal for home and professional use where impeccable audio is a must, Chroma Cables complement the modern DJ and music production technology with a streamlined styling that keeps your setup looking fresh and sleek. All cables are not created equal, and these are engineered from scratch for digital performers, by digital performers.

Noise-Filtering Features

Each cable has two ferrite core chokes, one at each end of the cable. Paired with fully-braided shielding, Chroma Cables do a great job of eliminating interference along the signal path - making these the best USB cables for DJs.

Two Styles, Eight Colours

Cables come in straight and right-angle options. The angled cable helps to prevent accidental removal and takes up less space, giving you a less crowded DJ booth. Label gear by colour so you always know your soundcard from your controller.

Always Strapped

Even after placing your cables neatly in your bag, it's easy to wind up with a tangled clump of cables. The built-in velcro cable strap helps prevent this, keeping your gig bag nice and tidy. You'll wonder how you managed without this.

Compatibility Notes:

Works with all* USB devices with a USB type B connector but it's worth checking for obstructions if you plan on ordering an angled cable.

*Please note that the right angle cable won't work with a Kontrol D2, S2, S4, S5, S8, or Z1 or Traktor Audio 10 while using the power supply.

Size + Weight:
Length: 59.05" / 150cm
Weight: 0.18lb / 0.08kg"

Notes: Heavy duty 3.5mm Eurorack patch cables built with an extra thick 4mm PVC jacket, and internal shielding. These are built to last, and feature an ergonomic grip on the connector for comfortable patching and repatching. Available in standard configurations and a multitude of colours and lengths, these cables are sure to become your new favourite patching pals.

Notes: Electrovision USB to 6.35mm mono jack plug instrument lead allowing connection to a PC, Mac or laptop. The lead is compatible with Mac, OS X, Windows 98se/2000/xp/vista/windows 7, Windows 8, Windows 10/ Android/ and comes with a robust 3m in black. For Singing, Ideal for recording high quality sound on your device.

Colour: Black
Connector: USB to 6.35mm Mono Jack
Frequency Response (Hz): 20-19k
Length (m): 3
Type: USB to 6.35mm Mono Jack
Product Dimensions (mm): 3000 x 30 x 20
Net weight (kg): 0.14

Notes: 2-track trigger sequencer/euclidean generator module - 6HP

Running Order is a two track trigger sequencer. It can be a precise master clock or manipulate incoming clock signal and works great in use as a sub-sequencer/divider in your Eurorack environment.

Zero-jitter clock generation: less than 50 microseconds internal clock jitter
101 style 1/16th note input mode (step/rest) with manual or CV controllable amount of triggers repeats when the active trigger step happens
Euclidean mode enabled for each track where we set Euclidean total steps amount in the circle and then amount of triggers happening in that circle.
Per step trigger probability in 101 mode and global probability in Euclidean mode.
Separate synchronization (reset) inputs, sync for track 1 is normalled to sync track 2
Clock divider for incoming external clock allows to quickly obtain various musical divisions on the fly incl. triplets of course, but more importantly tuplets mode allows you to stretch desired amount of triggers happening into a single bar
Separate mute buttons for each track
8 patterns of triggers sequences stored in the module and recalled on the next power up
also available in 1U / 22HP version

Power consumption:
30 mA +12V
10 mA -12V
0 mA 5V

Dimensions
6 HP
30 mm deep

Notes: Ernie Ball flex patch cables feature a high-quality design made with superior components that are built to last. The single-conductor design provides crystal-clear tone, while the low-profile connectors and supreme flexibility allow for optimized pedalboard layout. Flex patch cables utilize 95% shielding to reject unwanted noise and preserve your signal, and the durable PVC jacket exterior ensures lasting performance.

Notes: Ernie Ball flex patch cables feature a high-quality design made with superior components that are built to last. The single-conductor design provides crystal-clear tone, while the low-profile connectors and supreme flexibility allow for optimized pedalboard layout. Flex patch cables utilize 95% shielding to reject unwanted noise and preserve your signal, and the durable PVC jacket exterior ensures lasting performance.

Notes: Ernie Ball flex patch cables feature a high-quality design made with superior components that are built to last. The single-conductor design provides crystal-clear tone, while the low-profile connectors and supreme flexibility allow for optimized pedalboard layout. Flex patch cables utilize 95% shielding to reject unwanted noise and preserve your signal, and the durable PVC jacket exterior ensures lasting performance.

Notes: Ernie Ball flex patch cables feature a high-quality design made with superior components that are built to last. The single-conductor design provides crystal-clear tone, while the low-profile connectors and supreme flexibility allow for optimized pedalboard layout. Flex patch cables utilize 95% shielding to reject unwanted noise and preserve your signal, and the durable PVC jacket exterior ensures lasting performance.