スタジオ用電源｜DJ用パワー・コンディショナー

Notes: Universal power supply for all Sonicware LIVEN devices:

9V - 2A - center plus polarity
EIAJ 3 connector (1.7×4.75×9.5mm)
incl. adapter set EU/US/UK/AU

Notes: The Electro-Harmonix EHX9.6DC-200 is the player's choice of battery eliminator for many of the world's most popular effects pedals including EHX, Boss, MXR, Ibanez and others. It is a 9.6 Volt DC/200mA linearly regulated power supply with 2.1mm x 5.5mm center negative barrel plug.

Notes: This power adapter provides power to MIDI Solutions products in instances when it is not available or where a large number of items are being chained in series. It has an optically isolated MIDI In, MIDI Thru, and power connection for a 9V (AC or DC) wall adapter. It's possible to power up to 20 MIDI Solutions products from the power adapter's single Thru output. It can also be used in a transmitter/receiver configuration to send MIDI over long distances.

Notes: Macro Power S8 is a pedal power supply with eight output power supply jacks, equipped with vary functions input voltage switch, independent output power jacks, over-current protection and adjustable output. It was designed to meet users needs and offer convenient and pure experiences.

Output power jacks: From left to right
One adjustable voltage output power jack, can choose output voltage from 9V/12V/15V/18V. The output current is 200mA.
Three independent output power jacks, each lines output voltage is 9V, and the output current is 200mA.
Four parallel output power jacks, each lines output voltage is 9V. And support the whole 400mA power needs that the four lines parallel into an independent output power jack.

Notes: Mooer Stage Power Supply PDNT9V2AUK makes the ideal accessory for powering your favourite Mooer guitar effects pedals. Mooer Stage Power Supply PDNT9V2AUK can deliver up to 2 Amps at 9-volt (DC) 2 and features a pedal board style design. PDNT9V2AUK power supply when used with either the 'Power Cable Daisy Chain' PDC-5A (for 5 x pedals) or the PDC-8A (for 8 x pedals), can drive up to eight Mooer FX pedals.

Notes: The Zeus Studio Bus is Tiptop Audio's next generation of the Zeus Eurorack power system and is the world's only high-power system that can guarantee low noise with minimal bleed-through between modules for a clear sounding synth. The power supply is the backbone of your modular system and will define how well it all works; this is not some simple circuit that flashes LEDs on but is a complex analog circuit, not something you want to chance with the various boutique power supplies.

The Zeus SB takes the next step to simplify wiring up power into cases that scale from a simple 3U row to complete walls of modular synthesizers, all done without dealing with hot AC power lines. The Zeus system comprises of an external brick Cincon-TTA power supply, Zeus Access and a Zeus Studio Bus, providing everything needed for a DIY or a professional Eurorack case. The Zeus Studio Bus board is equipped with fourteen Eurorack standard power connectors and two AS power connectors. Connecting wires to and from the board is done using a spring action connector, no special tools are needed, all it takes is to push the lever down and insert the wire. The spring action connector provides multiple points of connection allowing for different types of power configurations, starting with simple daisy chains and up to professional multi-thread star wiring. At the heart of the Zeus SB is our new design of discrete linear power regulators, aimed at providing robust, Low noise studio-grade power to deal with today's growing challenge of a great selection of modules from many different manufacturers that must share the same power bus. And with an eye towards the future, the Zeus SB prepares you for the new wave of high-current digital modules and the upcoming Tiptop Audio Analog Polyphonic system.

Notes: Protect your electronic equipment with this 19" rack mountable power conditioner featuring an RFI/EMI filter. The filter works by preventing noise from florescent lights, certain dimmers and similar sources of electronic pollution contaminating the AC line and leaking into sensitive audio, video or computer circuits. In addition; the front panel features two LED lamps with dimmer control for illuminating your rack.

Notes: Mains Power Leads UK - IEC 10A

UK 3 pin plug to IEC C13 female plug 3 cores mains power lead, suitable for connecting power to general electronic equipment up to 2300W (10A).

Max. current: 10A
Max. power: 2300W

Notes: New replacement power adapter for Access Virus Models that use 12vdc power supplies.

Converter block has figure-of-8 connector and converts a 240V UK mains current to 12V for compatible Access Virus TI models.

Notes: The Samson POWERBRITE PB10 PRO is a 19 inch rackmount power conditioner that makes the perfect addition to any rack case. On its front panel it features dual digital voltage multi meters to display input and output voltage levels, and two led lamps with dimmer control for illuminating your rack. With surge protection and peak voltage clamping the PB 10 Pro is ideal for clean uninterrupted power. The Powerbrite PB 10 Pro also has a gooseneck lamp included for lighting the rear of your rack case.

Notes: The Heart and SOL of Your Pedalboard

SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark. Featuring the same 660mA at 9V DC per outlet and four switchable voltages on each outlet as its bigger brother CIOKS DC7, SOL is the most powerful small form-factor power supply available today with a total of 30 watts of DC power available.

Specifcations

Mains input: 100-240V AC universal
Outlet 1-5:
9V DC / 660mA or
12V DC / 500mA or
15V DC / 400mA
or 18V DC / 330mA each
Total output power: max. 30W

What's in the box

9 Flex cables included:
3 x 1030 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 30cm (black)
2 x 1050 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 50cm (black)
1 x 2050 - Type 2 - 5,5/2,1mm DC plug, centre positive, L-shape, 50cm (red)
1 x 4050 - Type 4 - 5,5/2,5mm DC plug, centre positive, L-shape, 50cm (green)
1 x 1035 - Split Flex type 1 - 30 & 50cm (black)
1 x 1533 - 3-way daisy chain Flex type 1, 30+30+50cm (black) Included in the box
SOL power supply
AC mains power cord (region specific)
Mounting hardware for Pedaltrain and Templeaudio boards (two screws and one hex-key)
Product manual
Flex Guide
CIOKS sticker sheet

Notes: 100-240V AC adapter for the Suzuki Omnichord OM-108.

Notes: A plug-in power adaptor for powering Chord and various other brand guitar effects.

Notes: 240V UK Replacement Power Supply for MXB1002, UBB1002 and 1002B

Notes: Replacement power supply for Etherwave theremin.

Notes: Designed especially for the use with effect pedals and pedalboards, the Purifier minimizes and removes noise induced by poor DC power adapter construction delivering clean DC power to your stompboxes. It provides standard 2.1 x 5.5 mm barrel jack connectors and automatically detects your DC power supply's polarity. The Purifier cleans any output voltage from 5 to 30 volts DC.

Notes: Protect your equipment and organise your power distribution with this 19" rack mounting unit. The front panel features a digital voltage meter and two LED lamps with dimmer control for illuminating your rack.

Notes: The PB 4x4 features ART's 4x4 distribution on the back of the unit, 4 of the 8 rear outputs are 1.25" apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have 8 total power outlets to choose from.

Built into the PB 4x4 is a Surge and Spike Protection System, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering.

The PB 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The unit has a total power capacity of 1800W, and has a front-mounted, 15 AMP circuit breaker.

The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19" equipment racks. Applications for the PB 4x4 include live sound systems/PA, permanent or fixed installations, church, club and practice PA systems, DJ sound systems, home and project recording systems, and monitor systems.

The PB 4x4 features a one-year warranty.

Notes: Direct connection:
DR-1, GT-R1, DR-2d, DR-07, DR-V1HD, DR-100, DR-100MK2, DP-004, DP-006, DP-008, DP-008EX, CD-GT2, CD-BT2, CD-VT2, MP-GT1, MP-BT1, MP-VT1, GB-10, LR-10, PT-7, US-2x2

Using DC to mini-USB conversion cable:
GB-10, LR-10

Using DC to mini-USB conversion cable:
DR-03, DR-05, DR-07MK2, DR-40, DR-22WL, DR-44WL, DR-60D, DR-60DMK2, DR-70D, DR-7

Input power: AC100-240V, 50/60Hz
Output power: 5.0V, 2A

Notes: Power up your Kommander with the special Kommander PSU! For the regions North America and Europe!

Notes: Vermona Replacement 12VAC/830mA AC power adapter (115V US 2-pin plug).

Notes: 9V myVolts PSU for use with myVolts 5-way power splitter cable for Korg Volca

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: This mains charger has 2 USB sockets, each capable of producing 2100mA output. Ideal for charging tablet computers, smartphones, cameras and other devices.

- Blue LED power ON indicator
- Capable of charging two devices simultaneously

Notes: Power up to 5 Roland Boutiques from just one USB plug!

This unique myVolts 5-way power splitter lets you power up to five Roland Boutiques at once, from one USB mains power plug.

It's compatible with all the Roland Boutiques in the range - including the JX-03, VP-03, TB-03, JP-08, JU-06, TR-09 and A-01.

Option '5-way splitter PLUS PSU' includes the 5-way splitter PLUS a myVolts 5V 2000mA USB power supply adaptor, to power from one to five Boutiques.

Option '5-way splitter only' includes only the 5-way splitter, you'll need to supply your own 5V USB power adaptor. Each Roland Boutique draws up to 400mA of current, so if you want to power 5, you need a USB power adaptor capable of delivering 2000mA - like the one we bundle with it.

Get in touch with myVolts if you've any questions about what PSU you need.

Cable features:
Main cable is 1 metre in length
Cable splits into 5 male plug connectors to fit the Boutiques, each one is 0.7m in length
myVolts-branded band keeps the cables tight
Canary yellow cabling makes it easy to spot amongst your other gear
Comes with a myVolts-branded Velcro cable tie

PSU features:
5V DC voltage output
2000mA (or 2A) maximum current output. Each Boutique draws only the current it needs from the max current available.
Worldwide voltage input AC100-240V, 50/60Hz

myVolts loves solving the power problems of creative people like you, so you can forget about them and just get on with the business of making great music.

Get in touch and let us know what you need solved - with more than 10 years in the game, we're obsessed with power!

Notes: Use the modular power adapter to power your modular system from a wall socket instead of using the battery pack.

Notes: Never worry about power again. Zuma is the highest horsepower, most technologically advanced effects pedal power supply of its kind. Zuma offers nine high-current, individually isolated, ultra-low-noise outputs-each with its own dedicated regulator and custom transformer. Designed to meet the needs of today's players, each output provides a staggering 500mA of current.

Zuma's dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering result in a power supply that allows your pedals to achieve their highest possible dynamic range.

The all analog circuitry offers two stages of isolation. Each of the nine output channels is individually isolated from the 24V DC, and the 24V DC is isolated from the AC input power, eliminating ground loop and AC line noise issues. Zuma also provides dual power regulation: Wide-bandwidth optically isolated feedback loops on each channel, as well as on the input, allow both the input and outputs to adjust for changes, ensuring solid output under changing load conditions.

With automatic international power compatibility built-in, Zuma delivers an abundance of clean, rock-steady power to all your pedals, on any stage anywhere you play in the world.

Have a growing rig? Zuma is part of an expandable system. Add more outputs by connecting a Strymon Ojai (sold separately) with the 24V Out jack.

Many popular guitar pedals were originally designed to work with batteries. Since batteries are inherently very low noise and not susceptible to ground loops, these pedals often were not designed to be resistant to noise from power supplies. Stymon's ultra-low-noise design prevents power noise from bleeding into the audio signal, allowing your pedals to deliver the highest possible dynamic range.

Playing gigs all around the world? No need to purchase separate power supplies for your international tour. Zuma has automatic worldwide power compatibility built-in (when connected with the appropriate IEC cable). Whether you're on 120V, 240V, 100V, or any variation in between, Zuma will deliver clean, reliable power to your pedals, even if the venue has dirty power.
Do you have pedals that require 12V or 18V? Zuma has you covered. Two channels have selectable 9, 12, or 18V output voltages.

Some analog pedals designed for 9V operation may provide higher output and/or more clean headroom when run at higher voltages such as 12V or 18V. However, others will simply start smoking and melting, so please check with the manufacturer of your pedal before operating at a higher-than-standard voltage!

Don't let the blue chassis fool you: Zuma is green at heart. Significantly more efficient than linear power supplies, Zuma is able to deliver substantially more current while handling a much wider range of input voltages. Zuma's high efficiency design delivers high-current power distribution in a compact unit, for a small carbon footprint and a small pedalboard footprint.

Strymon has solved the switching power supply problem. With their dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering, we have designed a switching power supply that is actually quieter than linear units.

Notes: Power up to 5 Korg Volcas from one 9V power adaptor!

Compatible with the Volca Beats, Volca Bass, Volca Keys, Volca Sample, Volca FM and the new Volca Kick.

Option '5-way splitter PLUS PSU' includes MyVolts 9V power supply adaptor, suitable for powering up to 5 Volcas from a mains socket (choose from UK, EU or US plugs).

Option '5-way splitter PLUS USB' includes MyVolts 5V USB to 9V power converter cable, for powering up to 5 Volcas from any USB port - like the USB port in a laptop, a phone charger, or an inexpensive USB power bank!

Option '5-way splitter only' includes only the 5-way splitter, you'll need to supply your own 9V centre positive power adaptor, with 5.5mm outer diameter, 2.1mm inner diameter tip.

Main cable is 1 metre in length

Cable splits into 5 male plug connectors to fit the Volca, and each one is 0.7m in length

MyVolts-branded band keeps the cables tight

Female connector fits a 5.5mm OD and 2.1mm ID tip - it needs a power adaptor with 9V centre positive polarity.

Choose from 5 options:
5-way splitter + USB. Includes 5V to 9V USB converter cable, for powering up to 5 Volcas from any USB port - like the USB port in a laptop, iPhone charger, or an inexpensive USB power bank. Works anywhere in the world!
5-way splitter only
5-way splitter + 9V UK wall power adaptor
5-way splitter + 9V US wall power adaptor
5-way splitter + 9V EU wall power adaptor

Notes: The PSU6 power supply is required for proper operation in your part of the world, and one of a wide range of power supplies offered by Behringer specifically for your device.

Notes: Sequential Tempest & Poly Evolver Keyboard replacement power supply For North America, Europe & UK. Designed to power the Sequential Analog Keyboard/Digital Synthesizer.

Official Sequential 15-volt power supply for:

- Tempest
- Poly Evolver keyboard
- Poly Evolver rack

Notes: AC to DC Adapter (Mean Well GS90A15-P1M)

- 90 Watt AC-DC power supply with universal AC input range

- Built-in active PFC (Power Factor Correction) function, PF>0.91
(Green initiative for highest efficiency and minimum line-induced noise)

- Protection from Short circuit/Overload/Overvoltage/ Over temperature

- 2 year warranty

* Uses 2.5mm x 5.5mm barrel connector

This is the recommended PSU for the TPS80W

PLEASE NOTE: Requires 3 Pin Kettle Plug/UK Mains Connector (not supplied).

Notes: Have an existing Strymon effects pedal power supply? Gain five additional isolated pedal outputs with an Expansion Kit. Easily build a modular power system that can grow with your pedalboard.

Expansion Kits require an existing Strymon power product which connects to an AC power outlet, either directly (Zuma, Zuma R300) or via an external power adapter (Ojai R30, Ojai). Simply link an Expansion Kit to your existing Strymon power product via the 24V jack.

Expansion Kits consist of an isolated power distributor and all of the necessary connection cables to integrate it with your existing Strymon power supply and power up to five additional effects pedals.

Use an Expansion Kit when you need to add more pedals to your Strymon powered pedalboard. Expansion Kits do not come with a power adapter, and will operate only when connected to an existing Strymon power product.

Notes: The ZEUS Passive Bus Board is used to distribute power to modules coming from either the first generation of ZEUS Powered Bus Board, uZEUS or any other power supply available from other manufacturers. The Passive Bus Board contain both standard quick fit terminals as well as screw terminal block for connecting to power. The quick fit connect are mounted on the bottom side of the bus board to provide clean wiring, while the screw terminal blocks available simultaneously upfront for the most simple and easy connection to power if needed.

Although called Passive, the ZEUS Passive Bus board can produce up to 220ma of +5V supply by its own built in regulator, giving you the confidence that a 5V supply will be there for you in case one of your new modules requires it.

NOTE: This board does not interface with Zeus Studio Bus

Notes: Power supply unit designed for all SoMa Laboratory instruments.

Notes: This power adapter offers fast, efficient charging at home, in the office or on the go. It works with any Apple device that requires charging.

- Genuine Apple MFi approved product
- Only suitable for use in the United Kingdom, Ireland, Hong Kong, Singapore and Malaysia

Notes: PS-124 24V Power Adapter. Useful if you need a spare or replacement for your Ojai or Ojai R30.

Notes: This high-quality, low-noise power supply adaptor by myVolts has an output of 5V DC and 2A max. Tip: USB A Female.

It's suitable for any device that has a power requirement matching this specification.

If your device has a current requirement lower than 2A that's fine, only the current required by the device is drawn by the device.
So a device that needs, for example, 500mA (or 0.5A) current will be perfectly served by a 1000mA (or 1A) power adaptor.

Specification:

Input:
Input voltage: AC100-240V, 50/60Hz (for worldwide use)
Plug: UK Plug

Output:
Output Voltage: 5V DC
Output Current (Max): 2A


Cable and tip:
Cable length: 0 metres
Tip: USB A Female

Safety and certs:
CE certified: Yes
RoHS certified: Yes
Energy efficiency: Rated 'Energy Star level VI'

Notes: Plug-top type power supply (wall wart)

Output: 9V 550mA unregulated, centre positive 2.1mm DC plug.
Input: 230V AC 50Hz with UK 13 amp 3 pin power plug.

Notes: Plug-top type power supply (wall wart).

Output: 9 volts 550mA unregulated - centre positive 2.1mm DC plug.
Input: 110 to 120 volts 60Hz with U.S. style 2 pin power plug.

Notes: With this cable, you can power your Korg Volca synth(s) directly from the VMIX-10, no need for the Volca power adapters! The cable has a standard 5.5/2.1mm plug on both ends plus an adapter to the 4.0/1.7mm plug that fits in the Volca power in socket. Without the adapter, the cable can be used for other 9V devices with 5.5/2.1 socket, as long as they have a "center positive" power socket.

The length is 50cm; perfect for a compact setup with VMIX-10 and a number of Volcas around.

Please note: the Korg Volcas in the photo are not included, they are for demonstration purposes only.

Notes: Is your pedalboard growing? Add more outputs to your Zuma R300 by connecting a Strymon Ojai or Ojai R30 (sold separately) with the 24V Out jack. Zuma R300 is part of a truly expandable, modular power distribution system that can grow with your pedalboard.

Many popular guitar pedals were originally designed to work with batteries. Since batteries are inherently very low noise and not susceptible to ground loops, these pedals often were not designed to be resistant to noise from power supplies. Strymon's ultra-low-noise design prevents power noise from bleeding into the audio signal, allowing your pedals to deliver the highest possible dynamic range.

Do you have a pedal that requires 12V or 18V? Zuma R300 has you covered. One channel has selectable 9, 12, or 18V output voltages. Some analog pedals designed for 9V operation may provide higher output and/or more clean headroom when run at higher voltages such as 12V or 18V. However, others will simply start smoking and melting, so please check with the manufacturer of your pedal before operating at a higher-than-standard voltage!

Zuma R300's all analogue circuitry offers two stages of isolation. Each of the five output channels is individually isolated from the 24V DC, and the 24V DC is isolated from the AC input power, eliminating ground loop and AC line noise issues. Zuma R300 also provides dual power regulation: Wide-bandwidth optically isolated feedback loops on each channel, as well as on the input, allow both the input and outputs to adjust for changes, ensuring solid output under changing load conditions.

Playing gigs all around the world? No need to purchase separate power supplies for your international tour. Zuma R300 has automatic worldwide power compatibility built-in (when connected with the appropriate IEC cable). Whether you're on 120V, 240V, 100V, or any variation in between, Zuma R300 will deliver clean, reliable power to your pedals, even if the venue has dirty power.

Don't let the blue chassis fool you: Zuma R300 is green at heart. Significantly more efficient than linear power supplies, Zuma R300 is able to deliver substantially more current while handling a much wider range of input voltages. The high efficiency design delivers high-current power distribution in a compact unit, for a small carbon footprint and a small pedalboard footprint.

Zuma R300's ultra-low profile design means that it can fit under just about any pedalboard. It also features built in threaded hardware for easy mounting.

Notes: Replacement PS-124 24V Power Adapter. Useful if you need a spare or replacement for your Ojai or Ojai R30.

Compatible with: Ojai, Ojai R30

Includes:
PS-124 24V power adapter
EIAJ-05 power adapter cable
IEC cable
Dimensions: 4.2" x 2.15" x 1.25" (107mm x 55mm x 32mm)
Weight: 4.7 oz. (133g)

Notes: The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or 2 condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. The Phantom II Pro installs inline between your microphone and a balanced line input on your gear. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used.

The Phantom II Pro is an invaluable tool in application areas including (but not limited to): home or professional recording studios, live sound, PA, permanent installs, DJ, AV, podcasting and broadcasting. Use it with mixers, audio processors, digital audio workstations or anywhere you need phantom power for your mics.

Notes: ReVolt 2-battery kit lets you power any device that needs 2 x AAA batteries from a USB port instead.

Kit contains an AAA bridge cable that gives the device a DC power jack input, an AAA dummy battery and a 3V Ripcord USB cable. The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.

With ReVolt, you'll never need to put batteries into your device again. You can power it whichever way suits you - from a wall phone charger, a USB port on your laptop, a USB powerbank, a USB wall plug, or even from a USB solar cell.

Included in the 2-battery kit:

ReVolt AAA Bridge cable with AAA dummy battery
myVolts 3V Ripcord USB to DC power cable, centre
If you want to power a device that needs 2 x AA batteries, add to your order 2 x ReVolt AAA Dummy Battery

Not sure what you need to power your device? Drop us an email at [email protected] and we'll advise - we've 15 years' experience powering devices and we'd love to solve your power problem, big or small.

Why buy ReVolt?

Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed

Notes: Power Supply Tester

Hot Tip is a power supply tester - it lights up when you connect a working power supply to it.

Uh-oh. Something's not coming on - but is the plug or the device that's dodgy? It's easy to test a plug with the Hot Tip. Just plug the power supply into the wall, then connect it to the Hot Tip - the LED illuminates if there's power, so you'll know if your plug is good or bad.

The female end of Hot Tip accepts a standard 5.5mm outer diameter / 2.1mm inner diameter barrel tip - it's the commonest size, usedon 98% of effects pedals, synths etc.

If you want to test a power adaptor with a different size output, just add the sizes you want to your cart, and we'll send you the parts to fit.

Not sure what size tip you need? Ask us and we'll advise - myVolts has 12 years in the power game and there's nothing we don't know about power.

Power Passthrough

Hot Tip doesn't get in the way of the power - you can power a device through it.

You can power a device without removing the Hot Tip from the PSU tip end - the LED draws almost no power, so you can go ahead and plug the tip end of Hot Tip into your device. That's handy for dark environments, like on a stage - or anytime you want to know and be sure there's power available. (The only works for gear that Hot Tip fits into, 5.5mm outer diameter and 2.1mm inner diameter).

Polarity Indicator LED

Hot Tip illuminates BLUE for centre positive polarity, and RED for centre negative polarity.

Power supplies got mixed up, now you're not sure what polarity which PSU is? Hot Tip contains a bi-colour LED, and lights up BLUE when the connected PSU is polarity centre positive (BLUE C +) and RED when the connected PSU is polarity centre negative (RED C -). It's written on the Hot Tip too, so you don't need to remember it.

Notes: This AtomoSynth power supply is designed for the Koe Desktop, the Mochika XL & the Krakken Keyboard (220-240V AC to 12V AC, 500mA). Indoor use only.

Notes: AC/TC:
One of the most frequent questions we receive from our users is, "How do I make sure that I supply my TC effect pedal with the correct amount of power?" Questions surrounding Voltage and Milliamps are probably some of the most important, since too little can lead to noise, hum and unwanted tone degradation, while too much or the wrong kind of power can seriously damage your equipment.

With our new PowerPlug power supplies we've taken all the guesswork out of the equation for you, so you can be sure that your TC Electronic stompbox is only supplied with the correct amount of TC approved power every single time! So why spend time worrying about voltage? You got songs to write, gigs to play and solos to shred!

Notes: With these you may modify older ZVEX pedals to accept 9v DC (center negative) power input. The standard type will fit all models except Probes.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Universal power supply for all Sonicware LIVEN devices:

9V - 2A - center plus polarity
EIAJ 3 connector (1.7×4.75×9.5mm)
incl. adapter set EU/US/UK/AU

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.