DJミキサー

Notes: A solid all-round DJ mixer at a very good price, the PM-202FX is a two-channel design equipped with built-in digital effects to expand your creative options when mixing. Dedicated filter controls for each channel add versatility.

Supplier's Notes:
Two channel mixer ideal for mobile DJ setups and home use.

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: Max. 8 W
Protection class: Protection class II
Power connection: Mains input via C8 (M) "figure 8" mounting version power supply cord with Euro plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >80 dB
THD: <0,1 % at 1 kHz
DJ filter: Per channel: LPF/HPF bipolar,
DJ-FX: Master: CHORUS, REVERB, DELAY, FLANGER
Master: WHA, PHASE,
Control: Bluetooth
Bluetooth device name: PM-202FX
Range: Bluetooth: range up to 15m
Crosstalk: >60 dB
Control elements: Crossfader, Crossfade curve control, crossfade reverse switch, FX Parameter control, power switch
Status LED: Power, master level meter
Connections: Input: line/phono via 2 x stereo RCA
Input: line via 2 x stereo RCA, microphone via 1 x 3-pin XLR (F) mounting version, antenna via 1 x SMA (F) mounting version, Earthing connection via 2 x screw terminal
Output: master via 2 x 3-pin XLR (M) mounting version, master via 1 x stereo RCA, rec. via 1 x stereo RCA, headphones via 1 x 6.3 mm jack socket (stereo) mounting version, headphones via 1 x 3.5 mm jack (stereo) mounting version
Channels: Input channel: 2 x stereo with Line-Line/Phono-Bluetooth switch via RCA, channel control via 60mm fader, 2-band tone control EQ, gain control, CUE switch
Microphone channel: 1 x mono via XLR, channel control via rotary dial, 2-band tone control EQ
Master output: 1 x stereo via XLR or RCA, channel control via rotary dial, balance control
Headphones output: stereo via jack, channel control via rotary dial, cue mix function
Rec. output: stereo via RCA
Material: Metal

Colour: Black
Housing design: Desktop console housing
Dimensions: Length: 30,5 cm
Width: 19,0 cm
Height: 11,0 cm
Weight: 2,18 kg

Power cord

Cable length: 2,10 m detachable

Notes: ***B-STOCK: Box opened, product in perfect working order***


Super portable and lightweight DJ mixer. Its small dimensions, just a bit larger than a large smartphone, and its little weight of merely 500 grams offer many advantages. A Gnome can be taken anywhere, as it doesn't require a lot of space - perfect as back up for mobile DJs. In many small bars, space is also a problem - here a Gnome is really helpful too. You should and will always find a place for this smart mixer. Thanks to the variety of five colours, it always matches the furniture. The Gnome forgoes a battery - the input signal is amplified by using a cord.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Still a classic, still a brilliant mixer. Nearly 20 years on the market but sounding just as good as ever, the Xone:92 seems like a bit of a bargain now.

Supplier's Notes:
The industry-standard Xone:92 is a versatile six channel analogue mixer, renowned for its expansive, involving sound. With its solid construction and easy to use interface, the 92 is on the riders of most of the world's top DJs and is a permanent fixture in the booth at many of the biggest superclubs.

The Xone:92 was one of the first professional DJ mixers to incorporate MIDI for control of DJ software or external devices, and the first to include the innovative dual VCF filters. With its two stereo FX sends, twin Mic/returns, and one of the best EQ sections around, this mixer is a DJ's dream tool.

For those who prefer to blend with rotary faders the Xone:92R is also available.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two channel mixer ideal for mobile DJ setups and home use.

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: Max. 8 W
Protection class: Protection class II
Power connection: Mains input via C8 (M) "figure 8" mounting version power supply cord with Euro plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >80 dB
THD: <0,1 % at 1 kHz
DJ filter: Per channel: LPF/HPF bipolar,
DJ-FX: Master: CHORUS, REVERB, DELAY, FLANGER
Master: WHA, PHASE,
Control: Bluetooth
Bluetooth device name: PM-202FX
Range: Bluetooth: range up to 15m
Crosstalk: >60 dB
Control elements: Crossfader, Crossfade curve control, crossfade reverse switch, FX Parameter control, power switch
Status LED: Power, master level meter
Connections: Input: line/phono via 2 x stereo RCA
Input: line via 2 x stereo RCA, microphone via 1 x 3-pin XLR (F) mounting version, antenna via 1 x SMA (F) mounting version, Earthing connection via 2 x screw terminal
Output: master via 2 x 3-pin XLR (M) mounting version, master via 1 x stereo RCA, rec. via 1 x stereo RCA, headphones via 1 x 6.3 mm jack socket (stereo) mounting version, headphones via 1 x 3.5 mm jack (stereo) mounting version
Channels: Input channel: 2 x stereo with Line-Line/Phono-Bluetooth switch via RCA, channel control via 60mm fader, 2-band tone control EQ, gain control, CUE switch
Microphone channel: 1 x mono via XLR, channel control via rotary dial, 2-band tone control EQ
Master output: 1 x stereo via XLR or RCA, channel control via rotary dial, balance control
Headphones output: stereo via jack, channel control via rotary dial, cue mix function
Rec. output: stereo via RCA
Material: Metal

Colour: Black
Housing design: Desktop console housing
Dimensions: Length: 30,5 cm
Width: 19,0 cm
Height: 11,0 cm
Weight: 2,18 kg

Power cord

Cable length: 2,10 m detachable

Notes: ***B-STOCK: Without original box, product in perfect working order***


Mid-range DJ mixer from the leading UK brand. Fully analogue four-channel design with A&H's much-loved Xone filter section. Very tempting alternative to the flagship Xone:96. Excellent value.

Supplier notes:
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.

The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.

With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.

Notes: Part of Resor's two-channel mixer range, the 2525 offers a classic setup of two-band EQs per channel, three-band master isolator, large VU meters and discrete class-A electronics.

Supplier's Notes:
Resor 2525 features the same discrete class-A circuitry as Resor 2500, but it's equipped with a Master Isolator with a bypass toggle switch.

*** Please note: the wood is thinner than displayed in the picture. ***

Inputs

Channel ONE & TWO: selectable sources between LINE and PHONO (Stereo RCA)

Outputs

Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA

Channel EQ

2-band Baxandall: Bass +/- 18 dB (at 150 Hz), Treble: +/- 12dB (at 10 kHz)

Master isolator

3-band, 24 dB /Oct, Linkwitz-Riley filters, crossover frequencies at 310 Hz and 3100 Hz Full-cut to maximum +12 dB, ON/OFF true bypass with Audio Grade Relay

Master insert

Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)

Other

2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the Cue or Mix signals
Rotary Switch to CUE between Channels ONE & TWO
Cue/Mix Blend potentiometer
External Power Supply Unit with lockable DC cable (both ends)
Travel Case (Dust and Water Proof)
3 Years International Warranty

Customisations

Wood: Natural Oak, Matte Black, Premium: Walnut
Faceplate: Black, Silver, Bronze; Premium: Metallic Red, Metallic Blue, Metallic Green
Knobs style: Standard, Urei; Premium: Silver Matte Aluminium, Black Matte Aluminium

Technical specifications

Line Inputs

Discrete, Class-A Op-Amps
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB

Phono Inputs

Discrete, Class-A Op-Amps, Gain 40 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 kohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 %
SNR better than -77 dB
Maximum input signal level before distortion 100 mVRMS

Master Output

Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm

Booth Output

Balanced TRS
Impedance < 300 ohm

Record Output

Nominal level -10dBV
Impedance < 300 ohm

Crosstalk

Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB

Dimensions

250 mm (W), 250 mm (D), 98 mm (H) - (please note that this does not include Knobs, Headphone Jack on the front side, RCA's and Sockets on the rear side of the mixer)

Weight

Mixer: 4 kg
Power Supply: 1 kg
With travel case: 8 kg

Notes: Mid-range model in the Resor two-channel series, the 2525 M features three-band EQ (as opposed to two-band on the standard 2525) and master isolator.

Supplier's Notes:
Resor 2525 M has a 3-band EQ per channel designed around their discrete class-A Op-Amp. The Bass control with a range of +/-18 dB at 100 Hz is great for sculpting the low-end frequencies, providing ample flexibility for enhancing or attenuating bass elements in the mix. The Mids control with a range of +/-12 dB at 800 Hz, and the Treble control with a range of +/-12 dB at 10 kHz enables adjustments to the high-frequency content, helping to add sparkle or tame any harshness.

Resor have encased the 2525M in a slim wooden chassis, which encompasses the faceplate, following the ethos of the four-channel models. Moreover, Resor have redesigned and improved the internal circuitry even further.

For a unique and personalised touch, among the extensive range of custom options, Resor offer Metallic Red, Metallic Blue, and Metallic Green faceplates; a Satin Dark wooden enclosure; as well as Urei, Matte Black, and Matte Silver Premium Aluminum Knobs.

Inputs

Channel ONE & TWO: selectable sources between LINE and PHONO (Stereo RCA)

Outputs

Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA

Channel EQ

3-band Baxandall: Bass +/- 18 dB (at 100 Hz), Mids: +/- 12dB (at 800 Hz), Treble: +/- 12dB (at 10 kHz)

Master isolator

3 Band, 24 dB /Oct, Linkwitz-Riley filters, crossover frequencies at 310 Hz and 3100 Hz Full-cut to maximum +12 dB, ON/OFF true bypass with Audio Grade Relay

Master insert

Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)

Other
2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the Cue or Mix signals
Rotary Switch to CUE between Channels ONE & TWO
Cue/Mix Blend potentiometer
External Power Supply Unit with lockable DC cable (both ends)
Travel Case (Dust and Water Proof)
3 Years International Warranty

Customisations

Wood: Natural Oak, Matte Black, Premium: Satin Dark
Faceplate: Black, Silver, Bronze; Premium: Metallic Red, Metallic Blue, Metallic Green
Knobs style: Resor Standard, Urei; Premium: Silver Matte Aluminum, Black Matte Aluminum
*Microphone Input: a TRS jack on the rear panel, with a separate volume control

Line Inputs

Discrete, Class-A Op-Amps
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB

Phono Inputs

Discrete, Class-A Op-Amps, Gain 40 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 kohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 %
SNR better than -77 dB
Maximum input signal level before distortion 100 mVRMS

Master Output

Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm

Booth Output

Balanced TRS
Impedance < 300 ohm

Record Output

Nominal level -10dBV
Impedance < 300 ohm

Crosstalk

Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB

Dimensions

250 mm (W), 250 mm (D), 98 mm (H) - (please note that this does not include Knobs, Headphone Jack on the front side, RCA's and Sockets on the rear side of the mixer)

Weight

Mixer: 4 kg
Power Supply: 1 kg
With travel case: 8 kg

Notes: Part of Resor's exceptional line-up of boutique, audiophile-standard rotary mixers, the 3300 is a four-channel design with three-band channel EQs, three-band master isolator and sweet sound quality.

Supplier's Notes:
The Resor 3300 is Resor's latest addition to the rotary mixers. It features a fully discrete class-A Master Isolator, 3-Band EQ per channel, a dedicated Microphone input with volume control, four Phono/Line preamps, Urei-style knobs, and more.

With this model, Resor bring an all-new discrete master Isolator developed over six months. The new class-A circuitry carries over the 24 dB /Oct filters, crossover frequencies, bypass Relay, and a "full cut" to a maximum boost of +12 dB. With the staggering number of components, including 28 BJT and 32 FET transistors, Resor have achieved outstanding performance in sound and measures.

The 3-band channel EQ is an entirely new design. It brings a fresh set of frequency curves and attenuation levels across all three bands, a lower noise floor, and retaining the discrete Op-Amp on duty.

There is a different curve across these two segments, with the Isolator having a more pronounced sweep and colour. In use, this means that per channel, you get to craft your sound via the EQ and then craft further still with a different tonal balance with the Isolator.

Across the EQ and Isolator, plenty of headroom is available across all frequency ranges, providing plenty of control when crafting the audio.

Each of its four channels features hi-fi Phono and Line inputs. With Phono preamps delivering 44 dB of Gain, both vinyl and digital are well-balanced. Further refinements on the Phono preamps gave us even more pleasing dynamics, headroom, and a broader frequency spectrum.

Resor offer an additional element of customisation that one can specify when they place their order, ranging from adding an FX-bus, changing the combination of colours for the faceplate to different wood finishes and knob options.

Inputs

Channels 1-4: selectable PHONO & LINE (RCA)
Microphone: dedicated XLR with own control

Outputs

Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA

Channel EQ

3 Band Baxandall: Bass +/- 18 dB (at 150 Hz), Mids +/-
10 (at 800 Hz), Treble: +/- 10dB (at 10 kHz)

Master isolator

Fully discrete class-A circuitry
3 Band, 24 dB /Oct, Linkwitz-Riley filters, crossover
frequencies at 310 Hz and 3100 Hz,
Full-cut to maximum +12 dB, ON/OFF true bypass with
Audio Grade Relay

Master insert

Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - post Master Isolator
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - pre Outputs

3300 FX (Send and Return)

Effects Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
Effects In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)

Customisations

Wood: Natural Oak, Matte Black, Walnut
Faceplate (Matte Aluminum): Black, Bronze, SIlver;
Premium Metallic Red, Metallic Green, Metallic Blue
Knobs style: Resor Standard, Urei knobs; Premium
knobs: Silver Matte Aluminum, Black Matte Aluminum
VU-Meters: Standard, 4x Round (one per channel)

Other

2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the
Cue or Mix signals
Rotary Switch to CUE between all four Channels
Cue/Mix Blend potentiometer
Audio Grade external Power Supply Unit
3 Years International Warranty

Line Inputs

Discrete, Class-A Op-Amps
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB

Phono Inputs

Discrete, Class-A Op-Amps, Gain 44 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 kohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 %
SNR better than -77 dB
Maximum input signal level before distortion 100 mVRMS

Master Output

Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm

Booth Output

Balanced TRS
Impedance < 300 ohm

Record Output

Nominal level -10dBV
Impedance < 300 ohm

Crosstalk

Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB

Dimensions

330 mm (W), 275 mm (D), 98 mm (Height - measured from the faceplate and including the rubber feets)

Weight

Mixer: 5.3 KGS
Power Supply: 1 KGS
With travel case: 11 KGS