Back catalogue: All genres

Notes: Tonar Misty Record-Clamp - transparent black. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.

Notes: Tonar Misty Record-Clamp - transparent blue. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.

Notes: Tonar Misty Record-Clamp - 'foggy' transparent. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.

Notes: Tonar Misty Record-Clamp - transparent green. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.

Notes: Tonar Misty Record-Clamp - transparent red. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.

Notes: Any vibrations in the record during playback will be picked by the cartridge and will be reproduced by the amplifier and speakers causing muddy sound, distortion and reduced detail. In order to avoid record vibrations you must make sure that the contact between the record and the platter is as perfecrt as possible.The tonar record clamp presses the record flat against the platter. Put the record on the turntable and then put the clamp on the spindle, press down & turn the knob to tighten. The weight of the clamp is minimal so it can be used on any record player with a fixed spindle.

Also many older manufactured records are warped to varying degrees, this causes big problems for the diamond stylus of the cartridge to track the grooves properly. The stylus pressure fluctuates as the stylus moves up and down while trying to track the warps. With bad results: muddy sound reproduction with distortions and if the turntables drive isn't really strong... audible flutter. In some cases the stylus may actually loose contact with the groove causing a hissing sound. Using the Tonarclampit will press the record onto the turntable platter, and the problematic surface will be flattened while you play the record causing a dramatic improvement of the reproduced sound on old records.

Take care that the platter bearing of your turntable is able to accept the additional weight of 760 g. If in any doubt please consult your record player instructions or your dealer before buying or using this weight.

760 grams Brass weight
Covered with black enamel for protection
Measurements: 78 mm x 25 mm

Base covered with felt to protect the record label

Notes: The Tonar Vinyline 4189 is a stereo MM/MC phono amplifier with external power supply unit.

Notes: Tonar 77003 DS - Replacement diamond for Shure Whitelabel cartridge

The model 77003 of the Tonar brand is a diamond equipped with a spherical tip perfectly adapted to meet the needs of DJs. This is a replacement diamond allowing you to replace the diamond in your Shure Whitelabel c ellule if it becomes worn.

Spare diamond for Shure Whitelabel cartridge
Diamond type: spherical

Specifications:
Frequency response: 20Hz-20kHz
Output voltage: 2.8-4.0 mv

Notes: This record cleaning fluid made for use in all types of record cleaning machines currently on the market is only suitable for vinyl records (Important do not use with old 78 RPM shellac records as the liquid may do irreparable damage). Now what is so special about the QS-TONAR vinyl cleaner compared to similar looking competing products on the market?

QS-TONAR liquid has an extremely low surface tension
- Only because of this reason QS-TONAR liquid can penetrate right to the bottom of the grove where other fluids seem to penetrate, but actually just stay lying on top of the record surface.
- Only QS-TONAR liquid cleaner soaks the dust, dirt, air pollution as well as residue from previously used cleaners, fatty deposits remaining from the original record pressing process, even fungi and molds caused by records having been stored in humid conditions etc.
- QS-TONAR liquid detaches all of the mentioned dirt from the walls of the grove after which the brushes in the machine can easily wipe the groove completely clean. The amount of residue remaining in the grove is negligible - this contrary to almost all other liquids currently on the market.
- QS-TONAR liquid is much more volatile than other liquids reducing the drying time of the record to a minimum.
- QS-TONAR liquid has another property causing the dirt to remain floating in the liquid rather than settling back at the bottom of the grove.

Notes: A stylus that meets the high demands of DJs.

The special heavy-duty suspension of the headshell and the spherical diamond guarantee reliable tracking. An integrated weight ring creates heaviness thus allowing high bearing strength.

The design allows easy installation on all drives with SME-Disco Connection: Tighten the plug in screw cap on the tone arm, adjust contact pressure and even the professional record no bounds are set.

Notes: Pair of Birdie DJ cartridge and stylus sets with spherical tips

Notes: This is currently the best quality head shell that Tonar can supply. Equipped with the finest quality OFC Copper Litz cartridge connection wires. Azimuth is adjustable by releasing the screw on the side of the shell.

Notes: This is currently the best quality head shell that tonar can supply. Equipped with the finest quality OFC Copper Litz cartridge connection wires. Azimuth is adjustable by releasing the screw on the side of the shell.

Notes: Replacement EP cartridge with elliptical stylus & T4P-type mounting

Notes: 12" acrylic stroboscopic disc for all speeds: 8 1/3, 16 2/3, 33 1/3, 45, 70, 72, 73, 75, 76, 78, 80, 81, 83, 85, 87, 90 RPM.

Notes: Tonar 3600 H-Flip Replacement Stylus. The stylus features a special hyper elliptical diamond.

Notes: This unique tonearm alignment gauge allows you to check the tonearm geometry of your record player and to install the pick-up ideally aligned to keep distortion to a minimum.

Instructions are included

Notes: Any vibrations in the record during playback will be picked by the cartridge and will be reproduced by the amplifier and speakers causing muddy sound, distortion and reduced detail. In order to avoid record vibrations you must make sure that the contact between the record and the platter is as perfecrt as possible.The tonar record clamp presses the record flat against the platter. Put the record on the turntable and then put the clamp on the spindle, press down & turn the knob to tighten. The weight of the clamp is minimal so it can be used on any record player with a fixed spindle.

Also many older manufactured records are warped to varying degrees, this causes big problems for the diamond stylus of the cartridge to track the grooves properly. The stylus pressure fluctuates as the stylus moves up and down while trying to track the warps. With bad results: muddy sound reproduction with distortions and if the turntables drive isn't really strong... audible flutter. In some cases the stylus may actually loose contact with the groove causing a hissing sound. Using the Tonarclampit will press the record onto the turntable platter, and the problematic surface will be flattened while you play the record causing a dramatic improvement of the reproduced sound on old records.

Take care that the platter bearing of your turntable is able to accept the additional weight of 760 g. If in any doubt please consult your record player instructions or your dealer before buying or using this weight.

760 grams Brass weight
Measurements: 78 mm x 25 mm

Base covered with felt to protect the record label