USD
Filter
録音用スタジオ・マイク・アクセサリー
録音用スタジオ・マイク・アクセサリー in stock for same day-shipping
こんな商品も購入されています...
Rycote Invision Broadcast INV 7 Suspension Mount 041107 For Condenser Microphones 19-25mm (microphone suspension mount)
Cat: 456403 Rel: 26 Jun 12
STD Lyres long bar with 2 x 19/25mm clips
Notes: The Rycote InVision range of microphone suspension mounts is an ideal solution for sound recording engineers who require a discrete low profile support for small to medium length microphones. The InVision suspensions all use the new patented Lyre suspension system developed by Rycote. The Lyre suspension uses no runner or elastic components to isolate the microphone from unwanted shocks and handling noises, instead the design of the shape allows a specific compliance to the microphone, and so prevents the handling noise reaching the capsule. The materials used within the Lyres allow the working temperature of the suspension to far exceed any elastic or rubber shock mount or suspension. The operating temperatures for the Lyres is quite extreme and ranges from minus 35-celcius to over 100- celcius.
They are suitable for a wide range of microphones including compact and medium bodied, and microphone series which use remote capsules. The InVision range retains all the flexibility, balance and professional performance that you can expect from a Rycote microphone suspension.
The Rycote 041107 INV-7 is comprised of 2 x 70mm wide standard lyres with integral 19/25mm clips fitted to a large size support bar. This mount is considered to be one of the most universal in the InVision range, being suitable for a wide range of condenser microphones having a shaft diameter of 19mm to 25mm.
… Read moreThey are suitable for a wide range of microphones including compact and medium bodied, and microphone series which use remote capsules. The InVision range retains all the flexibility, balance and professional performance that you can expect from a Rycote microphone suspension.
The Rycote 041107 INV-7 is comprised of 2 x 70mm wide standard lyres with integral 19/25mm clips fitted to a large size support bar. This mount is considered to be one of the most universal in the InVision range, being suitable for a wide range of condenser microphones having a shaft diameter of 19mm to 25mm.
out of stock $49.94
こんな商品も購入されています...
Cat: 485600 Rel: 20 Mar 13
Suspension mount for Rode NT2-A, NT1000, NT2000, NTK, K2 and Classic II microphones
Notes: The Rode NTSM2 Suspension Mount is a high qualiity shock mount for your microphone, providing near-perfect shock isolation, performance after performance amd reducing ambient and low-frequency noise.
It can be used with the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II and other similar sized condenser microphones.
… Read moreIt can be used with the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II and other similar sized condenser microphones.
out of stock $49.94
こんな商品も購入されています...
Rode SM3R Shock Mount With Rycote Lyre Suspension Mount (shock mount)
Cat: 623497 Rel: 07 Nov 16
Suspension shock mount with camera shoe adaptor
Notes: The SM3-R is a suspension shock mount with camera shoe adaptor for mounting various Rode Microphones onto a camera via the standard hot/cold shoe mount.
The SM3-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible Rode on-camera microphones, and integrated cable management clip.
… Read moreThe SM3-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible Rode on-camera microphones, and integrated cable management clip.
out of stock $48.54
こんな商品も購入されています...
Rode SM4R Shock Mount With Rycote Lyre Suspension Mount (shock mount)
Cat: 623499 Rel: 07 Nov 16
Rode boompole suspension shock mount
Notes: The SM4-R is a suspension shock mount for mounting various Rode microphones onto a mic stand or boompole with 3/8" or 5/8" thread.
The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible Rode shotgun microphones, and integrated cable management clip. The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning.
… Read moreThe SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible Rode shotgun microphones, and integrated cable management clip. The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning.
out of stock $48.54
こんな商品も購入されています...
Notes: The Boom Microphone Stand is manufactured using heavy duty steel tubing and high-grade hardware. This product also features fast, smooth, non-slip boom swivel and height adjustments. All locking points are protected by scratch-proof contact points.
… Read moreout of stock $48.26
こんな商品も購入されています...
Presonus SHK-2 Shock Mount For Revelator Microphone (black) (microphone shock mount)
Cat: 845650 Rel: 21 Dec 21
Shock mount for the PreSonus Revelator microphone.
Notes: Shock mount for the PreSonus Revelator microphone
Reduce physical handling noise and environmental vibrations to get the best possible sound from your PreSonus Revelator via this attractive and robust shock mount.
Custom-made for Revelator fit and compatibility; sturdy metal construction for long life; universal threaded stand mount ensures compatibility with standard mic stands and boom arms; compelling industrial style looks great on camera; extra shock cord included
Get the most out of your Revelator and take your streams, podcasts, and recordings to the next level with the SHK-2 shock mount. A shock mount isolates your microphone from the vibrations of the physical world: clacking mechanical keyboards; clumsy mic handling noise; or your overly curious cat jumping up on your desk again. All of these disruptions can add unwanted rumble and noise into your broadcasts and recordings-but that's where the SHK-2 shock mount can save the day! By isolating your Revelator from jarring movements, you'll ensure that your Discord teammates, listening audience, and YouTube subscribers only hear the most important thing-you!
… Read moreReduce physical handling noise and environmental vibrations to get the best possible sound from your PreSonus Revelator via this attractive and robust shock mount.
Custom-made for Revelator fit and compatibility; sturdy metal construction for long life; universal threaded stand mount ensures compatibility with standard mic stands and boom arms; compelling industrial style looks great on camera; extra shock cord included
Get the most out of your Revelator and take your streams, podcasts, and recordings to the next level with the SHK-2 shock mount. A shock mount isolates your microphone from the vibrations of the physical world: clacking mechanical keyboards; clumsy mic handling noise; or your overly curious cat jumping up on your desk again. All of these disruptions can add unwanted rumble and noise into your broadcasts and recordings-but that's where the SHK-2 shock mount can save the day! By isolating your Revelator from jarring movements, you'll ensure that your Discord teammates, listening audience, and YouTube subscribers only hear the most important thing-you!
out of stock $47.68
こんな商品も購入されています...
Samson SP01 Spider Shockmount for C01/C03/CL7/CL8/C01U Microphones (microphone shockmount)
Cat: 484104 Rel: 09 Mar 13
Condenser microphone shock mount
Notes: A spider-style suspension microphone shockmount designed for use with the C01, C03, CL7, CL8 and C01U condenser mics.
… Read moreout of stock $46.02
こんな商品も購入されています...
Ultimate Support JS MC100 Tripod Mic Stand (microphone stand)
Cat: 528681 Rel: 11 Jun 14
Basic tripod straight microphone stand with adjustable height
Notes: On stage or in the studio, you need a mic stand you can rely on. The Tripod Mic Stand resists tipping and is built tough to withstand every-day use. The powder-coated finish is scratch resistant to maintain its appearance, even on the most rigorous tour or recording schedules. Easily adjust the Tripod Mic Stand to perfect height with the traditional turn clutch.
… Read moreout of stock $46.01
こんな商品も購入されています...
Cat: 455767 Rel: 28 May 12
0.8m compactd 2.0m extended lightweight boompole
Notes: The Rode Micro Boompole provides ultimate boom pole performance in a convenient and portable size.
Intuitive twist locks allow the Micro Boompole's 3 sections to smoothly extend to 2063mm, while the ergonomic grip provides comfort during use.
Compatible with Rode PG1, PG2, Blimp, Videomic, Videomic Pro, Stereo VideoMic & Stereo VideoMic Pro models.
… Read moreIntuitive twist locks allow the Micro Boompole's 3 sections to smoothly extend to 2063mm, while the ergonomic grip provides comfort during use.
Compatible with Rode PG1, PG2, Blimp, Videomic, Videomic Pro, Stereo VideoMic & Stereo VideoMic Pro models.
out of stock $45.46
こんな商品も購入されています...
Rode NTSM5 Suspension with Camera Mount For NT3 / NT4 / NT5 / NTG series (microphone accessory)
Cat: 484227 Rel: 14 Mar 13
Camera mount suspension system for Rode NT3, NT4, NT5 and NTG series microphones
Notes: The Rode NTSM5 is a suspension shock mount with ring clamp adaptor for Rode Microphones to be used with high end cameras. The design of the suspension shock mount means the microphone is physically isolated from the stand ensuring that there is no unwanted rumble or vibrations in your recording.
… Read moreout of stock $44.89
こんな商品も購入されています...
Rycote InVision Video 1/4" Mounting Adaptor (microphone accessory)
Cat: 484669 Rel: 14 Mar 13
Microphone shock mount and suspension system for cameras or camcorders
Notes: Part of the larger InVision range of noise-reducing microphone shock-mounts, Rycote's InVision Video is a shock-mount and suspension system for high-quality external camcorder microphones between 19 and 25 mm in diameter, and up to 300mm in length, enabling camcorder users and videographers to get the best possible sound for their productions using external camera-mounted microphones. A lightweight, durable clamp holds the microphone in place, and is itself suspended in two of Rycote's w-shaped patented Lyre mounts, which provide substantially better isolation from camera motor, drive noise and vibrations than traditional on-camera microphone mounts. The Lyres are attached to a mounting bar which may be slotted into the hot shoe mount on top of your camera or screwed into the quarter-inch thread available on some camcorders by means of separately available adaptors.
… Read moreout of stock $44.89
こんな商品も購入されています...
Cat: 456410 Rel: 26 Jun 12
Mounting type hot shoe
Notes: The Rycote 042901 InVision range of microphone suspension mounts is an ideal solution for sound recording engineers who require a discrete low profile support for small to medium length microphones. The InVision suspensions all use the new patented Lyre suspension system developed by Rycote. The Lyre suspension uses no runner or elastic components to isolate the microphone from unwanted shocks and handling noises, instead the design of the shape allows a specific compliance to the microphone, and so prevents the handling noise reaching the capsule. The materials used within the Lyres allow the working temperature of the suspension to far exceed any elastic or rubber shock mount or suspension. The operating temperatures for the lyres is quite extreme and ranges from minus 35- Celcius to over 100- celcius.
They are suitable for a wide range of microphones including compact and medium bodied, and microphone series which use remote capsules. The InVision range retains all the flexibility, balance and professional performance that you can expect from a Rycote microphone suspension.
The InVision camera hot shoe adaptor is designed to support microphones with a shaft diameter of 19mm to 25mm including the slab sided Sennheiser MKH series. It attaches to the camera hot shoe by employing a 100mm long slotted mounting bar which allows you to slide the cradle and rotate it through 360- of movement, ensuring the microphone is always out of shot.
… Read moreThey are suitable for a wide range of microphones including compact and medium bodied, and microphone series which use remote capsules. The InVision range retains all the flexibility, balance and professional performance that you can expect from a Rycote microphone suspension.
The InVision camera hot shoe adaptor is designed to support microphones with a shaft diameter of 19mm to 25mm including the slab sided Sennheiser MKH series. It attaches to the camera hot shoe by employing a 100mm long slotted mounting bar which allows you to slide the cradle and rotate it through 360- of movement, ensuring the microphone is always out of shot.
out of stock $44.89
こんな商品も購入されています...
Rycote Microphone Protector Case (30cm) (microphone case)
Cat: 678143 Rel: 27 Apr 18
Robust, lightweight case, fits up to 3 small diaphragm microphones & includes 3 protective mic tubes - 30cm version
Notes: The brand new Rycote Mic Protector Case is a supremely tough, water resistant case designed to carry and safely protect up to 3 small diaphragm microphones. Available in 2 lengths - a 20cm and a 30cm version - this case has been designed with location/production sound professionals firmly in mind. Durable, lightweight and practical, the Mic Protector Case is a really useful addition to your sound kit.
As well as offering additional physical protection, the 3 clear plastic Mic Tubes provided are incredibly handy in their own right. With a clever 'threaded' design, each cylindrical tube is extendable - from 200mm to 340mm or from 125mm to 180mm in length.
Each Mic Tube is supplied with 4 foam inserts, to help cushion the microphone within the tube. You can also use the foam inserts to separate multiple smaller microphones within a single Mic Tube, e.g. Schoeps CCM's. The hexagonal tube-end offers another layer of protection, by ensuring your valuable microphone won't accidentally roll off flat surfaces, like tables!
The webbed carry loop and lightweight carabiner clip give you plenty of options for keeping the Mic Protector Case close to hand.
… Read moreAs well as offering additional physical protection, the 3 clear plastic Mic Tubes provided are incredibly handy in their own right. With a clever 'threaded' design, each cylindrical tube is extendable - from 200mm to 340mm or from 125mm to 180mm in length.
Each Mic Tube is supplied with 4 foam inserts, to help cushion the microphone within the tube. You can also use the foam inserts to separate multiple smaller microphones within a single Mic Tube, e.g. Schoeps CCM's. The hexagonal tube-end offers another layer of protection, by ensuring your valuable microphone won't accidentally roll off flat surfaces, like tables!
The webbed carry loop and lightweight carabiner clip give you plenty of options for keeping the Mic Protector Case close to hand.
out of stock $44.89
こんな商品も購入されています...
Rode WS7 Deluxe Wind Shield for Rode NTG3 or similar sized shotgun microphone (microphone accessory)
Cat: 485596 Rel: 20 Mar 13
Deluxe shockmount suitable for Rode NTG-3 or any shotgun microphone with maximum slot length of 186.5mm and diameter of 19-20mm.
Notes: The Rode WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones.
Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the Rode NTG-3 and any shotgun microphone with a maximum slot length of 186.5mm (7 1/4") and a diameter of 19-20mm.
… Read moreDesigned to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the Rode NTG-3 and any shotgun microphone with a maximum slot length of 186.5mm (7 1/4") and a diameter of 19-20mm.
out of stock $44.89
こんな商品も購入されています...
Analog Cases Shure Super 55 Glide Case (microphone case)
Cat: 871614 Rel: 09 Aug 22
Glide case designed for the Shure Super 55
Notes: You can now carry your mic with style thanks to the GLIDE Case For The Shure Super 55! Analog Cases have created the ideal case for one of the music world's most recognizable microphones so that you can transport and protect the Super 55 with ease. The GLIDE Case For The Shure Super 55 has a custom die-cut foam insert that matches the exact dimensions of your microphone, so you can be confident your investment is secure during transport!
Description
The GLIDE case is made of a durable, molded EVA material that will protect your Shure Super 55 from any knocks and falls. The GLIDE Case has been custom fitted to the exact dimensions of the microphone, with a die-cut padded foam insert to keep your Super 55 secured and cushioned when you're on the go.
The interior is lined with black velvet material to prevent any scratches on the classic-looking, sleek exterior of your Super 55. Whether you're packing down from a podcast or hanging your microphone from the roof, keep your Super 55 safe and portable in the GLIDE case!
Specifications
Perfect fit for your Shure Super 55
Die-cut foam interior to secure your microphone
Made of durable and lightweight EVA material
Soft, velvet-lined interior
Exterior: (10.63 x 6.3 x 2.56) Inches
… Read moreDescription
The GLIDE case is made of a durable, molded EVA material that will protect your Shure Super 55 from any knocks and falls. The GLIDE Case has been custom fitted to the exact dimensions of the microphone, with a die-cut padded foam insert to keep your Super 55 secured and cushioned when you're on the go.
The interior is lined with black velvet material to prevent any scratches on the classic-looking, sleek exterior of your Super 55. Whether you're packing down from a podcast or hanging your microphone from the roof, keep your Super 55 safe and portable in the GLIDE case!
Specifications
Perfect fit for your Shure Super 55
Die-cut foam interior to secure your microphone
Made of durable and lightweight EVA material
Soft, velvet-lined interior
Exterior: (10.63 x 6.3 x 2.56) Inches
out of stock $44.89
こんな商品も購入されています...
Rycote Mini Windjammer 055476 For Zoom H3VR Recorder (recorder windshield)
Cat: 725375 Rel: 25 Mar 19
1x Mini Windjammer for Zoom H3-VR
Notes: Rycote Mini Windjammers are easy-to-fit, slip-on fur covers that provide excellent wind protection. Designed use with camera microphones, portable recorders and mic foams, Mini Windjammers provide outstanding protection in applications such as outside broadcast and documentary film. Originally developed by Rycote, the Windjammer is a high-quality, synthetic fur-cover that provides excellent protection against extreme wind-noise.
… Read moreout of stock $44.89
こんな商品も購入されています...
Rycote Baseball 3" Windscreen Triple Pack (black, 24/25mm) (microphone windscreens)
Cat: 639584 Rel: 20 Feb 17
Pack of 3 durable windscreens specifically designed for interior boom pole use - 24/25mm
Notes: Minimise the 'Swoosh' when booming!
This ingenious little 3" windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.
The Baseball is fitted with a soft yet durable end-cap. Made of thermoplastic elastomer - a unique plastic and rubber mix - the end-cap helps secure the mic and provides an effective seal against wind. The Baseball comes in '19/20' and '24/25' variants, reflecting compatible microphone diameters in mm.
Mic compatibility (24/25mm):
- Sennheiser MKH 40, MKH 50
… Read moreThis ingenious little 3" windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.
The Baseball is fitted with a soft yet durable end-cap. Made of thermoplastic elastomer - a unique plastic and rubber mix - the end-cap helps secure the mic and provides an effective seal against wind. The Baseball comes in '19/20' and '24/25' variants, reflecting compatible microphone diameters in mm.
Mic compatibility (24/25mm):
- Sennheiser MKH 40, MKH 50
out of stock $43.77
こんな商品も購入されています...
Quiklok QLX4 Height Adjustable Telescopic Mic Boom (microphone boom)
Cat: 743794 Rel: 15 Aug 19
Fully-adjustable telescopic mic boom
Notes: Designed for use with X-Series keyboard stands, QLX/4 mic boom and QLX/5 sheet music holder can also be used with WS/650 only in combination with Z/727 add-on tiers. These optionals similarly require QLY/42 add-on tiers to be used with QLY/40 Y-Series keyboard stand.
Height positions: 6.5" to 11.25" / 16.5 to 28.5cm
Attaching collar: Grip-Lok / 30
Boom length: 22.5" to 40.5" / 57cm to 102cm
Weight: 2.4lb - 1.1kg
… Read moreHeight positions: 6.5" to 11.25" / 16.5 to 28.5cm
Attaching collar: Grip-Lok / 30
Boom length: 22.5" to 40.5" / 57cm to 102cm
Weight: 2.4lb - 1.1kg
out of stock $43.76
こんな商品も購入されています...
Gravity MS3122HDB Short Heavy Duty Microphone Stand With Folding Tripod Base (microphone stand)
Cat: 672854 Rel: 12 Dec 17
Tripod microphone stand
Notes: Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The heavy-duty tripod base is made of die cast zinc with ultra-strong folding legs of steel and hefty rubber caps for surface protection.
The boom hub features precision 2-point tilt and position adjustment of the telescoping arm. A quick fastener allows for easily variable extension to a maximum length of 88 cm, and the custom designed retainer requires no tools for quick and secure mic clip attachment.
A set of black coding rings is included with the GMS 3122 HDB, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Max. height: 320 mm
- Transport length: 500 mm
- Height adjustment: No
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 880 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 3 x 20 mm
- Black ring pack included
… Read moreThe boom hub features precision 2-point tilt and position adjustment of the telescoping arm. A quick fastener allows for easily variable extension to a maximum length of 88 cm, and the custom designed retainer requires no tools for quick and secure mic clip attachment.
A set of black coding rings is included with the GMS 3122 HDB, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Max. height: 320 mm
- Transport length: 500 mm
- Height adjustment: No
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 880 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 3 x 20 mm
- Black ring pack included
out of stock $42.97
こんな商品も購入されています...
Cat: 455701 Rel: 28 May 12
Deluxe windshield for use with NTG1 and NTG2 shotgun microphones
Notes: The Rode WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions. It is suitable for the Rode NTG1 and NTG2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.
… Read moreout of stock $42.94
こんな商品も購入されています...
Kinsman MB05 Tripod Base Microphone Boom Stand (microphone boom stand)
Cat: 780179 Rel: 12 Jun 20
boom stand for microphone
Notes: Adjustable for both height and angle with a large span tripod base with rubber feet for stability. The boom arm section is fully adjustable with a bar type locking ring. This stand is suitable for almost every miking application due to its versatility and height adjustment. Black finish with microphone clip and cable clip.
… Read moreout of stock $42.94
こんな商品も購入されています...
Rycote Mini Windjammer For Rode Videomic Pro Microphones (microphone windshield)
Cat: 578977 Rel: 14 Jul 15
Mini windjammer for use when capturing audio in high-wind environments
Notes: The Mini Windjammer for Rode Video Mic Pro with Rycote Lyre provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, it slips over the foam windshield provided with the Rode Video Mic Pro with Rycote Lyre for additional wind protection with virtually no additional loss of high-frequencies.
Note: This product is specifically designed for the Rode Video Mic Pro with Rycote Lyre. It is not designed for use with other Rode Video Mic models.
Main Benefits:
- Record, interview or broadcast in any weather
… Read moreNote: This product is specifically designed for the Rode Video Mic Pro with Rycote Lyre. It is not designed for use with other Rode Video Mic models.
Main Benefits:
- Record, interview or broadcast in any weather
out of stock $42.64
こんな商品も購入されています...
Rycote Baseball 3" Windscreen (black, 21/22mm) (microphone windscreen)
Cat: 658084 Rel: 21 Aug 17
Durable windscreen specifically designed for interior boom pole use
Notes: Baseball is the ingenious little 3" windscreen, specifically designed for interior boom pole use. It offers a simple, improved solution to greatly reduce the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic), that are induced by fast boom swings and other rapid movements. Baseball 21/22mm is compatible with the following mics: Audio-Technica AT4049b, AT4051b, AT4053b, AT4021b, AT4022, AT4041; Neumann KM180 Series (KM183, KM184, KM185) & Sennheiser ME64 K6.
… Read moreout of stock $41.52
こんな商品も購入されています...
Rode PSM1 Suspension Microphone Shock Mount For Procaster & Podcaster Microphones (black) (microphone shock mount)
Cat: 455704 Rel: 07 Jun 12
Shockmount for the Podcaster microphone
Notes: The perfect suspension shock mount for the Procaster or Podcaster, the Rode PSM1 removes the ability for external vibrations to manipulate the microphones positioning.
The PSM1 gives you a sense of confidence when using your microphone in environments where there is a lot of movement that may interfere with the microphones performance.
… Read moreThe PSM1 gives you a sense of confidence when using your microphone in environments where there is a lot of movement that may interfere with the microphones performance.
out of stock $41.26
こんな商品も購入されています...
Rycote Mini Windjammer 055477 For Shure MV88 Microphone (microphone windshield)
Cat: 725376 Rel: 25 Mar 19
1x Mini Windjammer for Shure MV88
Notes: Rycote Mini Windjammers are easy-to-fit, slip-on fur covers that provide excellent wind protection. Designed use with camera microphones, portable recorders and mic foams, Mini Windjammers provide outstanding protection in applications such as outside broadcast and documentary film. Originally developed by Rycote, the Windjammer is a high-quality, synthetic fur-cover that provides excellent protection against extreme wind-noise.
… Read moreout of stock $40.39
こんな商品も購入されています...
Rycote Stickies Adv 23mm Round Lavalier Mic Adhesive Mounts (100 pieces) (microphone accessory)
Cat: 647978 Rel: 08 May 17
Pack of 100 Stickies for mounting lavalier microphones on skin or clothing
Notes: Double-sided, hypoallergenic, adhesive pads used to affix lavalier microphones directly onto skin or on top of clothing. The soft fabric sandwiched between the two adhesive pads prevents the adhered mic from creaking due to skin or clothing movement.
… Read moreout of stock $40.12
こんな商品も購入されています...
Citronic Foldable Microphone Isolation Screen (microphone isolation screen)
Cat: 877409 Rel: 10 May 22
Foldable microphone isolation screen
Notes: Foldable Microphone Isolation Screen
Curved isolation screen for studio microphones with acoustic absorption foam lining and mic stand mounting adaptors. Two foldable sides for easy stowage and transport. Designed to eliminate unwanted reflections and room noise for recording vocal passages.
Dimensions (closed): 300 x 230 x 140mm
Dimensions (fully extended): 400 x 300 x 140mm
Weight: 1.04kg
In the box
The box for this item contains:
Foldable microphone isolation screen
2 x 3/8" mic stand blind nut + washer
70mm mic mounting stem
… Read moreCurved isolation screen for studio microphones with acoustic absorption foam lining and mic stand mounting adaptors. Two foldable sides for easy stowage and transport. Designed to eliminate unwanted reflections and room noise for recording vocal passages.
Dimensions (closed): 300 x 230 x 140mm
Dimensions (fully extended): 400 x 300 x 140mm
Weight: 1.04kg
In the box
The box for this item contains:
Foldable microphone isolation screen
2 x 3/8" mic stand blind nut + washer
70mm mic mounting stem
out of stock $40.12
こんな商品も購入されています...
Gravity MS4222B Short Microphone Stand With Folding Tripod Base & 2 Point Adjustment Telescoping Boom (microphone stand)
Cat: 672852 Rel: 12 Dec 17
Tripod microphone stand with 2-point boom adjustment
Notes: The MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.
The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.
A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Min. height: 510 mm
- Max. height: 740 mm
- Transport length: 650 mm
- Height adjustment: Yes
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 880 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 4 x 20 mm
- Black ring pack included
… Read moreThe boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.
A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Min. height: 510 mm
- Max. height: 740 mm
- Transport length: 650 mm
- Height adjustment: Yes
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 880 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 4 x 20 mm
- Black ring pack included
out of stock $39.84
こんな商品も購入されています...
Gravity MS4221B Short Microphone Stand With Folding Tripod Base & 2 Point Adjustment Boom (microphone stand)
Cat: 672855 Rel: 12 Dec 17
Tripod microphone stand
Notes: The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.
The boom hub features precision 2-point tilt and position adjustment of the 50cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.
A set of black coding rings is included with the MS 4221 B, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Min. height: 510 mm
- Max. height: 740 mm
- Transport length: 600 mm
- Height adjustment: Yes
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 500 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 4 x 20 mm
- Black ring pack included
… Read moreThe boom hub features precision 2-point tilt and position adjustment of the 50cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.
A set of black coding rings is included with the MS 4221 B, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Min. height: 510 mm
- Max. height: 740 mm
- Transport length: 600 mm
- Height adjustment: Yes
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 500 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 4 x 20 mm
- Black ring pack included
out of stock $39.49
こんな商品も購入されています...
Samson MK5 Boom Microphone Kit (microphone stand)
Cat: 586816 Rel: 26 Jan 18
Complete boom mic stand set-up
Notes: The MK5 package gives you all the accessories you need: a heavy-duty adjustable boom mic stand, an 18-foot XLR mic cable, a microphone windscreen and a mic clip. Perfect for use with your favourite microphone, Samson's MK5 mic stand gives you both durability and portability, so it's ideal for on-the-go musicians, venues and rehearsal spaces. Combined with a professional-grade windscreen and mic cable, you're ready to perform anywhere anytime.
… Read moreout of stock $39.29
こんな商品も購入されています...
LD Systems DSM400 Microphone Shock Mount With Pop Filter (microphone shock mount/pop filter)
Cat: 672844 Rel: 12 Dec 17
Shock mount with pop shield
Notes: High quality suspension shock mount for studio microphones with integrated pop filter.
- Double nylon screen guarantees optimum sound filtering during studio recording
- Sturdy black plastic frame
- Shock mount diameter: 43-49 mm
- Threaded connector: 5/8"
- Screen: 130 mm
… Read more- Double nylon screen guarantees optimum sound filtering during studio recording
- Sturdy black plastic frame
- Shock mount diameter: 43-49 mm
- Threaded connector: 5/8"
- Screen: 130 mm
out of stock $39.28
こんな商品も購入されています...
Rycote Mini Windjammer 055471 For Zoom H1N Recorder (recorder windscreen)
Cat: 700023 Rel: 06 Nov 18
Slip-on fur cover for Zoom H1N
Notes: Rycote 055471 Mini Windjammer for the Zoom H1N Handy Recorder. The Mini Windjammer is made from the same material designed and manufactured for Rycote using their acclaimed microphone-specific wind-protection solutions. Available for over a dozen contemporary portable recorder models, the slip-on windjammer provides excellent wind protection for professional-quality results in the wealth of outdoor news, documentary and podcasting applications where portable recorders are used today.
… Read moreout of stock $39.28
こんな商品も購入されています...
Rycote Mini Windjammer 055473 For Sony ICDSX2000 Recorder (recorder windscreen)
Cat: 700025 Rel: 06 Nov 18
Slip-on fur cover for Sony ICDSX2000
Notes: Rycote 055473 Mini Windjammer for the Sony ICD-SX2000 recorder. The Mini Windjammer is made from the same material designed and manufactured for Rycote using their acclaimed microphone-specific wind-protection solutions. Available for over a dozen contemporary portable recorder models, the slip-on windjammer provides excellent wind protection for professional-quality results in the wealth of outdoor news, documentary and podcasting applications where portable recorders are used today.
… Read moreout of stock $39.28
こんな商品も購入されています...
Rycote Mini Windjammer 055474 For Sennheiser Memory Mic (microphone windshield)
Cat: 725374 Rel: 25 Mar 19
1x Mini Windjammer for Sennheiser Memory Mic
Notes: Rycote Mini Windjammers are easy-to-fit, slip-on fur covers that provide excellent wind protection. Designed use with camera microphones, portable recorders and mic foams, Mini Windjammers provide outstanding protection in applications such as outside broadcast and documentary film. Originally developed by Rycote, the Windjammer is a high-quality, synthetic fur-cover that provides excellent protection against extreme wind-noise.
… Read moreout of stock $39.28
こんな商品も購入されています...
Rycote Mini Windjammer 055442 For Sony PCM M10 (windjammer)
Cat: 486937 Rel: 29 Mar 13
Mini windjammer for use with the Sonoy PCM M10
Notes: Rycote's Mini Windjammer range has expanded tremendously in recent years with the introduction of compact slip-on fur Windjammer for the growing numbers of portable handheld digital recorders, as used by journalists, podcasters and broadcasters everywhere. These devices are now available in such a range of shapes, sizes and types (mono and stereo), that slightly different custom Windjammer designs are needed for each one; over a dozen types are currently available. If you want to make professional-quality recordings outdoors for TV, radio or film use on a handheld recorder, get yourself one of our Mini Windjammer.
The Rycote Mini Windjammer 055442 is designed for the Sony PCMM10.
… Read moreThe Rycote Mini Windjammer 055442 is designed for the Sony PCMM10.
out of stock $38.72
こんな商品も購入されています...
Rode DeadCat VMP+ Artificial Fur Wind Shield For VideoMic Pro+ (microphone windshield)
Cat: 773385 Rel: 17 Apr 20
microphone wind shield
out of stock $38.55
こんな商品も購入されています...
Audix T50K Impendance Matching Transformer (microphone accessories)
Cat: 492491 Rel: 22 May 13
Mic to line transformer - Low output (100-600 Ohm) to Hi-Z 50K input
Notes: Adapts low impedance microphones to high impedance 1/4" inputs.
Ideal for uses such as attaching a microphone to a guitar amp.
… Read moreIdeal for uses such as attaching a microphone to a guitar amp.
out of stock $38.44
こんな商品も購入されています...
Rode Stereo Bar 20cm Stereo Array Spacing Bar (stereo bar microphone mount)
Cat: 528081 Rel: 02 Apr 14
Robust solution for mounting two microphones in a stereo array
Notes: With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RODE Stereo Bar makes it quick and easy to achieve complex recording arrays.
The 5/8" mounting threads are supplied with accompanying spacing clips to allow for easy positioning for stacked arrays, and the robust ABS construction makes the Stereo Bar stable and durable, allowing it to easily support the weight of two large diaphragm microphones such as the RODE K2.
*microphones not included
… Read moreThe 5/8" mounting threads are supplied with accompanying spacing clips to allow for easy positioning for stacked arrays, and the robust ABS construction makes the Stereo Bar stable and durable, allowing it to easily support the weight of two large diaphragm microphones such as the RODE K2.
*microphones not included
out of stock $38.44
こんな商品も購入されています...
Omnitronic AS-04 Foldable Desk-Microphone-Absorber System With Tripod (B-STOCK) (desk microphone absorber system)
Cat: 1016408 Rel: 01 Jan 90
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***
Microphone absorber system for studio and live applications
Portable absorber/diffusor for studio and live applications
Reduces unwanted room reflections, echoes and ambient noise during vocal and instrument recordings to a minimum
Extendable table tripod
3 folding segments
Sturdy steel frame with high-density acoustic foam
Technical specifications:
Attachment system: 5/8 inch thread
Type (general stands): Microphone stand (desk)
Dimensions
Width: 21 cm
Depth: 20 cm
Height: 38 cm
Weight: 800 g
… Read moreMicrophone absorber system for studio and live applications
Portable absorber/diffusor for studio and live applications
Reduces unwanted room reflections, echoes and ambient noise during vocal and instrument recordings to a minimum
Extendable table tripod
3 folding segments
Sturdy steel frame with high-density acoustic foam
Technical specifications:
Attachment system: 5/8 inch thread
Type (general stands): Microphone stand (desk)
Dimensions
Width: 21 cm
Depth: 20 cm
Height: 38 cm
Weight: 800 g
out of stock $38.39
こんな商品も購入されています...
Rycote Baseball Windjammer (microphone windscreen)
Cat: 658086 Rel: 21 Aug 17
Easy-to-fit, slip-on fur cover providing wind protection for Rycote Baseball models
Notes: The new baseball Windjammer is an incredibly useful little add-on product for the Baseball, allowing for even faster/deeper boom-swings indoors. Importantly, with the Windjammer fitted, the Baseball can now also be used outdoors in light winds.
This is hugely useful for transitions from indoor to outdoor recording in 'production sound' applications. With the Baseball 21/22 variant being compatible with so many 'music' focused microphones, the Windjammer also allows for this model to be used outdoors in light winds, e.g. for recording instruments in concert settings.
The Baseball Windjammer comes in one size, which fits all our Baseball variants, i.e. 19/20mm, 21/22mm and 24/25mm. Adding a Baseball Windjammer to the Baseball brings a very useful extra 10dB of wind noise attenuation, across the spectrum. So, the performance of the Baseball with the Windjammer fitted is -40dB wind noise attenuation, across the frequency spectrum.
… Read moreThis is hugely useful for transitions from indoor to outdoor recording in 'production sound' applications. With the Baseball 21/22 variant being compatible with so many 'music' focused microphones, the Windjammer also allows for this model to be used outdoors in light winds, e.g. for recording instruments in concert settings.
The Baseball Windjammer comes in one size, which fits all our Baseball variants, i.e. 19/20mm, 21/22mm and 24/25mm. Adding a Baseball Windjammer to the Baseball brings a very useful extra 10dB of wind noise attenuation, across the spectrum. So, the performance of the Baseball with the Windjammer fitted is -40dB wind noise attenuation, across the frequency spectrum.
out of stock $38.16
こんな商品も購入されています...
Rycote Microphone Protector Case (20cm) (microphone case)
Cat: 678142 Rel: 27 Apr 18
Robust, lightweight case, fits up to 3 small diaphragm microphones & includes 3 protective mic tubes - 20cm version
Notes: The brand new Rycote Mic Protector Case is a supremely tough, water resistant case designed to carry and safely protect up to 3 small diaphragm microphones. Available in 2 lengths - a 20cm and a 30cm version - this case has been designed with location/production sound professionals firmly in mind. Durable, lightweight and practical, the Mic Protector Case is a really useful addition to your sound kit.
As well as offering additional physical protection, the 3 clear plastic Mic Tubes provided are incredibly handy in their own right. With a clever 'threaded' design, each cylindrical tube is extendable - from 200mm to 340mm or from 125mm to 180mm in length.
Each Mic Tube is supplied with 4 foam inserts, to help cushion the microphone within the tube. You can also use the foam inserts to separate multiple smaller microphones within a single Mic Tube, e.g. Schoeps CCM's. The hexagonal tube-end offers another layer of protection, by ensuring your valuable microphone won't accidentally roll off flat surfaces, like tables!
The webbed carry loop and lightweight carabiner clip give you plenty of options for keeping the Mic Protector Case close to hand.
… Read moreAs well as offering additional physical protection, the 3 clear plastic Mic Tubes provided are incredibly handy in their own right. With a clever 'threaded' design, each cylindrical tube is extendable - from 200mm to 340mm or from 125mm to 180mm in length.
Each Mic Tube is supplied with 4 foam inserts, to help cushion the microphone within the tube. You can also use the foam inserts to separate multiple smaller microphones within a single Mic Tube, e.g. Schoeps CCM's. The hexagonal tube-end offers another layer of protection, by ensuring your valuable microphone won't accidentally roll off flat surfaces, like tables!
The webbed carry loop and lightweight carabiner clip give you plenty of options for keeping the Mic Protector Case close to hand.
out of stock $38.16
こんな商品も購入されています...
Rycote Baseball 3" Windscreen (black, 24/25mm) (microphone windscreen)
Cat: 639581 Rel: 20 Feb 17
Durable windscreen specifically designed for interior boom pole use - 24/25mm
Notes: Minimise the 'Swoosh' when booming!
This ingenious little 3" windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.
The Baseball is fitted with a soft yet durable end-cap. Made of thermoplastic elastomer - a unique plastic and rubber mix - the end-cap helps secure the mic and provides an effective seal against wind. The Baseball comes in '19/20' and '24/25' variants, reflecting compatible microphone diameters in mm.
Mic compatibility (24/25mm):
- Sennheiser MKH 40, MKH 50
… Read moreThis ingenious little 3" windscreen has been specifically designed for interior boom pole use. The Baseball greatly reduces the 'swooshes' (unwanted noise artefacts caused by laminar airflow across the mic) induced by fast boom swings and other rapid movements.
The Baseball is fitted with a soft yet durable end-cap. Made of thermoplastic elastomer - a unique plastic and rubber mix - the end-cap helps secure the mic and provides an effective seal against wind. The Baseball comes in '19/20' and '24/25' variants, reflecting compatible microphone diameters in mm.
Mic compatibility (24/25mm):
- Sennheiser MKH 40, MKH 50
out of stock $38.16
こんな商品も購入されています...
Chord SMS01 Spring Adjustable Boom Microphone Stand (microphone stand)
Cat: 722019 Rel: 25 Feb 19
Foldable microphone stand
Notes: Microphone stand with removable telescopic boom arm and spring loaded height adjustment. Removable base for easier transportation and storage.
… Read moreout of stock $37.61
こんな商品も購入されています...
Rycote Mini Windjammer 055472 For Tascam DR10SG Recorder (recorder windscreen)
Cat: 700026 Rel: 06 Nov 18
Slip-on fur cover for Tascam DR10SG
Notes: Rycote 055472 Mini Windjammer for the Tascam DR-10SG recorder. The Mini Windjammer is made from the same material designed and manufactured for Rycote using their acclaimed microphone-specific wind-protection solutions. Available for over a dozen contemporary portable recorder models, the slip-on windjammer provides excellent wind protection for professional-quality results in the wealth of outdoor news, documentary and podcasting applications where portable recorders are used today.
… Read moreout of stock $37.32
こんな商品も購入されています...
Cat: 466889 Rel: 31 Aug 12
Windshield used in conjuction with the Rode WSVM foam windshield
Notes: The DeadCat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
… Read moreout of stock $35.91
こんな商品も購入されています...
Editors Keys Studio Series Microphone Desk Boom Stand (desktop mic stand)
Cat: 501791 Rel: 02 Aug 13
Adjustable desktop microphone boom stand
Notes: This sturdy and fully adjustable desktop microphone boom stand features a screw-tight mechanism for attaching it to the edge of a desk or ther work surface.
… Read moreout of stock $35.36
こんな商品も購入されています...
Gravity MS4222B Short Microphone Stand With Folding Tripod Base & 2 Point Adjustment Telescoping Boom (B-STOCK) (microphone stand)
Cat: 984748 Rel: 01 Jan 90
B-STOCK: Without original box, product in perfect working order
Notes: ***B-STOCK: Without original box, product in perfect working order***
The MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.
The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.
A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Min. height: 510 mm
- Max. height: 740 mm
- Transport length: 650 mm
- Height adjustment: Yes
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 880 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 4 x 20 mm
- Black ring pack included
… Read moreThe MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.
The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.
A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colours for instant personalization.
- Tubing material: Steel
- Tubing colour: Black
- Tubing surface: Powder coated
- Min. height: 510 mm
- Max. height: 740 mm
- Transport length: 650 mm
- Height adjustment: Yes
- Base type: Tripod
- Base material: Zinc die-cast
- Boom model: 2-point adjustment
- Boom length: 880 mm
- Interchangeable rings: 1 x 25 mm, 2 x 15 mm, 4 x 20 mm
- Black ring pack included
out of stock $35.36
こんな商品も購入されています...
Cat: 456397 Rel: 26 Jun 12
Windjammer Zoom H4/Nagra Ares M/Nagra SD
Notes: The Rycote 055355 Mini Windjammer has been designed specifically to fit the integral microphones on the Zoom H4 and the Nagra Ares M portable field recorder. It is manufactured from a rugged synthetic fur material with a silk liner and can deliver 10 dB to 12 dB of additional wind noise attenuation.
… Read moreout of stock $35.34
こんな商品も購入されています...
Audix SMT25 Shockmount Suspension System For Audix SCX / VX5 / TM1 and I5 Pencil Microphones (microphone accessory)
Cat: 492481 Rel: 27 Jun 13
Shockmount suspension system for pencil condenser microphones
Notes: The SMT-25 Pencil Condenser Shock Mount is designed to acoustically isolate the transducer of Audix pencil style microphones from shock, vibration and handling noise.
**Also fits Audix i5 and VX5**
… Read more**Also fits Audix i5 and VX5**
out of stock $34.79
こんな商品も購入されています...
Rycote Rode VideoMic Mini Windjammer (microphone accessory)
Cat: 614698 Rel: 07 Jul 16
Mini micropgone windjammer for Rode VideoMic original with Rycote Lyre
Notes: The Mini Windjammer for the Røde VideoMic Original with Rycote lyre onboard provides excellent wind isolation for capturing audio in high-wind environments. Made from high-quality synthetic fur specifically designed for wind isolation, easy-to-fit slip-on fur covers for use when recording outside with the built-in microphones found on portable cameras, external camera mics and handheld reporter microphones.
Some of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Røde VideoMic Original with Rycote lyre onboard.
… Read moreSome of our Mini Windjammers have 10 mm fur, while others have 25 mm Softie fur for use in more unsettled conditions, and can be fitted to a wide variety of devices.
Note: This Mini Windjammer is specifically designed for the Røde VideoMic Original with Rycote lyre onboard.
out of stock $34.72
