オーディオ・インターフェイス

Notes: For Solo Musicians

AMS-22 | 2-In, 2-Out

Perfect for mobile recording or streaming, the AMS-22 includes an XLR/TRS combo input, plus a stereo line in. It also includes a headphone output and 2 TRS outputs for external monitors.

Quick Control

With onboard hardware switches, the AMS-22 is designed to simplify common streaming challenges without the need for additional software.

Onboard Monitoring

Use the Direct Monitor Switch to directly send the input signal to your headphones while routing the same signal to your DAW or streaming software.

Loop It Back

The Loopback Switch combines the input audio with playback from your computer and routes it to your streaming software. This is perfect for adding background music to your stream or singing live with an instrumental track.

Power Options

All three AMS interfaces can be powered from your PC or Mac via USB-C. Use external power when working from a tablet or mobile phone.

Plug it in...

Use the AMS Series on any device thanks to its support for Mac and PC, along with iOS and Android devices.

...And perform

The AMS Series is designed to integrate seamlessly with commonly used software, apps and platforms.

In Streaming mode, connect with your audience by streaming to popular platforms like YouTube, Facebook, Twitch, Instagram and Patreon.

In Music mode, record with software like Adobe Audition, Pro Tools, Cubase and GarageBand.

What's in the box

AMS-22 USB Audio Interface
USB-C Cable
Quick Tour

Technical Specifications

Input and Output Channels

Number of input channels - Mono (MIC/GUITAR): 1
Stereo (LINE IN): 1
Number of output channels - Stereo (TRS): 1
Stereo (PHONES): 1

Connectors

MIC/GUITAR - Type: XLR/TRS combo jack
(XLR: 2 HOT, TRS: TIP HOT)
Input Gain: +8 - +54 dB (MIC) / +8 - +54 dB (GUITAR)
Input impedance: XLR: 2 kO (MIC)
TS: 1 MO (GUITAR)
Maximum input level: XLR: +0.6 dBu (MIC)
TS: +11 dBu (GUITAR)
Phantom power: +48 V

OUTPUT (standard phone jacks - Type: TRS phone jacks (impedance balanced)
Maximum output level: -2 dBu (at 0 dBFS)
Output impedance: 100 O
OUTPUT (headphone jack) - Type: 3.5mm stereo mini jack
20 mW + 20 mW (32 O load)
Output impedance: 10 O
USB: USB Type-C (audio interface function)
Use a USB cable that supports data transfer. USB bus power is supported.
DC 5V: USB Type-C (for power supply)
LINE IN Type: 3.5mm stereo mini jack
Input impedance: 20 kO
Maximum input level: +1.5 dBu
Frequency Response: 44.1 kHz: +0/-2 dB (20 Hz - 20 kHz) - 96 kHz: +0/-3 dB (20 Hz - 40 kHz)
Equivalent Input Noise: -120 dBu or less (IHF-A) at +54dB/150O input

Audio Interface

Input and output channels: Recording: 2 channels
Playback: 2 channels
Sampling frequencies: 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz
Bit Depth: 24-bit
Interface: USB 2.0
Class: USB Audio Class 2.0

Power: AC adapter (ZOOM AD-17): DC 5 V/1A - USB bus power is supported.
Rated Current: USB bus power / DC 5 V power supply: 170 mA
Power Consumption: 1.8 W maximum
Dimensions: 68.0 mm (W) × 57.7 mm (D) × 46.0 mm (H)
Weight (unit only): 85 g
Note: 0 dBu = 0.775 Vrms

Notes: ***B-STOCK: Box opened, product in perfect working order***


A multi-platform audio interface with support for high-resolution audio up to 24bit/192 KHz and combination microphone, line-in, and high-impedance value instrument support. Dual-channel outputs are also included as well as one USB-C port for power and one USB-C port for data transfer, that can also be used for power when connected to a PC. Both the Steep I and II include dual LED input level indicators, support for 48v phantom power, a stereo direct monitor button, and knobs to control main output volume, mix, and input gain levels.

Specifications

Frequency Response: 20 Hz to 20kHz: 0.07dB
THD+N: 0.0094%
Minimum gain: -1 dBFS input with 22 Hz/22 kHz bandpass filter
Maximum Input Level (minimum gain level):L +11 dBu
Gain Range: 50dB
Input impedance: 1.5M ohm

Line Outputs

Output Jack: 1/4" TRS jack*2 (support balanced signal)
Dynamic Range: 108dB (A-weighted)
Maximum Input Level (minimum gain level) : +5.746 dBu
THD+N: 0.019% (minimum gain, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Input impedance 430 ohm

Headphone Outputs

Output Jack: 1/4" TRS jack*1
Dynamic Range: 104.9dB
Maximum Input Level (minimum gain level): +9.738 dBu
THD+N: <0.002% (minimum gain, -1 dBFS input with 22 Hz/22 kHz bandpass filter)
Output impedance: <1 ohm

Notes: Sound Starts Here

The M-Track Duo HD is a versatile new audio interface that provides value and ease of use without sacrificing the pristine quality that M-Audio products are known for worldwide. Whether you're just diving into the world of recorded audio or looking for a new production tool to add to your arsenal, the M-Track Duo HD is the first step in your next sonic journey.

Plug and Play - It's That Simple

The M-Track Duo HD is the path of least resistance between any song idea, podcast concept, or voiceover and a studio-quality finished product. There are no extraneous knobs or parametersionly the essentials for recording your next masterpiece. This simple, reliable, and powerful unit built with USB-C connectivity makes it easy to create and record studio-quality audio instantly with any modern DAW or iOS/Android device.

Grow As You Go

While the M-Track Duo HD and its streamlined controls are perfect for those just getting into recording their own audio, it is also optimized for growth and experimentation. Two inputs and outputs, high-quality audio resolution, and M-Audio's dedication to quality provide users with ample room to try out a vast array of recording setups and techniques to help push and hone their craft.

Professional Sound Quality

At 24-bit/192kHz audio resolution, zero-latency monitoring, and an onboard Crystal preamp that delivers 55dB of clear, chiseled gain, the M-Track Duo HD has the capacity to impress audio professionals and beginners all the same. With powerful, professional sound quality in a single compact and affordable unit, this interface is equally suited for bedroom producers, sessions musicians, podcasters, and everyone in between.

Convenient Connectivity

The M-Track Duo HD is compatible with any modern Mac, PC, iOS, or Android device via USB-C for convenient integration with popular DAWs and recording software.

Comprehensive Software Bundle

Every M-Track Duo HD comes with an extensive bundle of professional music production software to help propel each user's unique creative journey even further. This bounty of top-of-the-line DAWs, sample libraries, and effects are valued at over $1,200 and were designed by some of the industry's leading professionals. Studio staples like Ableton Live Lite are perfect for those just starting to experiment with production and engineering, while Reason+ puts a dizzying array of VSTs at your fingertips. Akai Professional MPC Beats is a benchmark tool for any beatmaker or ambitious songwriter. Plus, a two-month Splice subscription unlocks a vast library of samples and loops - many of which are used by music's best and brightest producers.

Notes: Whether you're about to become a content streamer or beat maker or anything beyond - with Neva Uno you're ready to go instantly.

Coming at a super affordable price, Neva Uno offers superior audio quality, elegant design and an extensive software package while retaining a compact form. Equipped with professional pre-amplified microphone and guitar inputs as well as two line inputs, it offers everything you need to get started right away. The USB-C port makes it easy to connect to your computer or mobile device. Neva Uno comes with professional ASIO drivers including DirectWIRE loopback function and more, so you can focus on your creativity.

Features

2 input / 2 output 24-bit / 192kHz USB 3.1 audio interface with USB-C connector
XLR combo microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered (no additional power adapter needed)
line output with unbalanced RCA connectors
headphone output with 1/4" connector
ADC with 97dB(a) dynamic range
DAC with 107dB(a) dynamic range
Zero latency hardware direct input monitoring activated by switch
Master output volume control
Supports Windows 10, Windows 11 with ASIO 2.0, MME, WDM and DirectSound
Supports macOS via the native CoreAudio USB audio driver from Apple
Stereo hardware loopback channel for internal recording
Includes Bitwig Studio 8-Track DAW
Includes Steinberg WaveLab LE audio editor license
Works with Cubasis LE from Steinberg for iPhone / iPad
Includes 3 month (up to 9000 minute) subscription to JackTrip Virtual Studio
Dimensions: 10.5cm x 9cm x 4cm


Connectors & Functions

+48V PHANTOM POWER SWITCH to provide power for a condenser microphone.

LINE HI-Z SWITCH for input 2 to switch between Line level and Hi-Z guitar signals.

DIRECT MONITORING SWITCH to enable or disable input monitoring to listen to the input signals.

GAIN KNOB 1 to change the input gain / input level for input 1. The LED ring indicates the signal level.

GAIN KNOB 2 to change the gain / input level for input 2. The LED ring indicates the signal level.

VOLUME KNOB to change the main output volume for connected headphones and speakers.

XLR / TRS COMBO INPUT 1 to connect a microphone via XLR cable or a line signal via 1/4" TRS connector.

TRS INPUT 2 to connect a line via 1/4" TS connector.

HEADPHONE OUTPUT to connect headphones.

LINE OUTPUT 1/2 to connect the stereo master line level output signal via RCA cables for left and right channels.

USB-C CONNECTOR to connect the audio interface to a PC, Mac, tablet or mobile phone.

Small, portable and perfect for your podcasting or live streaming applications

This stylish 24-bit / 192 kHz USB-C audio interface is so small, it will instantly become your new companion on the go and in your studio. Neva Uno is USB bus powered and Plug & Play, just plug it in and start working! It works with any modern Mac (Intel or M1 CPU or better), PC (Windows 10 and higher) and with many portable devices (iPhone, iPad, etc.). One XLR/jack combo input will take either your microphone or line signal, while the second 1/4" jack input accepts line or Hi-Z guitar signals. The inputs feature a mic preamp with up to 50dB gain and 48V phantom power support and the analog-to-digital converter provides 97db(a) dynamic range. On the output side, there is an integrated headphone amplifier and stereo line RCA outputs with a digital-to-analog converter with 107dB(a) dynamic range, allowing you to connect a mixer, amplifier or active speakers. You can monitor incoming audio signals with zero latency, just push the direct monitor button.

Neva Uno is compatible with virtually all common audio software thanks to the professional low latency ASIO 2.0 driver for Windows and CoreAudio compatibility on the Mac. There is even a DirectWIRE hardware loopback function that allows you to route and mix different sound sources internally: perfect for podcasting or live streaming applications.

All this turns Neva Uno into an ideal device to get started in the world of digital audio recording, no matter if you create your own music, if you want to mix and edit audio, if you work on your podcast or even for live streaming. And yet there is more: Bitwig Studio 8-Track and Steinberg WaveLab LE are included. On the iPhone and iPad, you can use Cubasis LE from Steinberg.

An alternative to Neva Uno is ESI's larger model Neva Duo with two microphone preamps.

Notes: WIDI Master is your virtual MIDI cable.
Bluetooth MIDI is the new wireless standard as approved by the MMA.
Now you can connect all your MIDI devices - without computers - without cables - with MIDI over Bluetooth!

Smart Connectivity Algorithms
WIDI distinguishes itself from any other Bluetooth MIDI technology available through its unique SCA technology. SCA is a collection of highly effective algorithms that optimise the performance of WIDI in any given situation. SCA stands for Dual Role Automation, Automatic Pairing Mode, Smart Hub Functionality, Latency Reduction Optimisation and Range Performance Optimisation!

Point to point BLE MIDI connectivity
Simply replace your MIDI cables- rearrange your studio and enjoy the freedom of WIDI.

Bluetooth 5: Go Faster, Go Further
Trusted technology for live and on stage- secure connection with twice the speed and four times the range

Ultra low latency
Go pro with ground-breaking latency reduction as low as 3ms- Smart algorithmic transmission optimization

Automatic pairing
Setup instantly. Operate easily.
Automatic master/slave switch and automatic paring.

MIDI Clock and SysEx
Sync your drum machines, step sequencers and arpeggiators- transmit all MIDI messages over Bluetooth

Detachable design
Only connect what you need- separated adapter design for MIDI OUT only

Versatile application
Connect with even the rarest instruments- 45 degree bridge cable design for vertical DIN connector setup

No external power
Enjoy the fully standalone wireless solution- supports both 5V and 3.3V via MIDI OUT DIN

Lifetime updates
Always benefit from the latest developments- new features updatable via using WIDI App (iOS/Android)

Wireless upgrade via Bluetooth
The easiest way to upgrade your firmware- firmware upgradeable by air via WIDI application software for Android & iOS.

What can you do with MIDI over Bluetooth?
Fully Standalone. Completely Wireless. 100% MIDI.

MIDI to MIDI
Connect two standalone MIDI hardware devices with two (2) WIDI Masters.

Bluetooth (BLE) to MIDI
Pair your bluetooth MIDI controller with any standalone MIDI hardware device using one (1) WIDI Master.

MacOS/iOS BLE to MIDI
Play your standalone MIDI hardware and pair it with your iOS device or Mac with one (1) WIDI Master using smart auto switch mode. About Windows/Android.

Specifications

Wireless technology
Bluetooth 4/5, MIDI over Bluetooth Low Energy-Compliant

Connectors
1x MIDI IN (5pin-DIN)
1x MIDI OUT (5pin-DIN)

Switch, indicator
1x switch, 1x Multicolor LED

Compatible devices
WIDI Master, WIDI BUD, Bluetooth MIDI controllers, iPhone/iPad/iPod Touch, Mac with Bluetooth 4.0 or later

Compatible OS
iOS 8 or later, OSX Yosemite or later

Firmware update
By air using WIDI App (iOS/Android)

Power supply
5V/3.3V compatibility MIDI OUT DIN

Power consumption
37 mW

Dimensions
Main: 21mm (W) x 21mm (H) x 49mm (D)
Sub: 18mm (W) x 18mm (H) x 24mm (D)

Notes: What is WIDI Jack?

WIDI Jack is your virtual MIDI interface

Now you can connect all your MIDI devices with standard MIDI I/O wirelessly via Bluetooth MIDI.

Enjoy ultra-low 3ms latency and secure connectivity via Adaptive Frequency Hopping.

Smart Connectivity Algorithms

Latency is not an issue with WIDI.

WIDI distinguishes itself from any other Bluetooth MIDI technology available through its unique SCA technology.

SCA is a collection of highly effective algorithms that optimize performance and minimize interference.

Latency is reduced to an inaudible 3ms as measured between 2 WIDI devices.

MIDI transmits data at a standard rate of 31.25 kbps via cable. WIDI products go up to 400 kbps.

Plug, pair & play- Transmit and receive Bluetooth MIDI via standard TRS/DIN MIDI I/O ports

Wide compatibility- Add the right TRS/DIN MIDI cable to connect all your MIDI devices. Plus TRS type A/B switch.

Bluetooth 5- High performance wireless MIDI with a working range of 20m/65ft without obstacles

Smart Power Solutions- Works fully standalone via powered MIDI OUT. USB power for unpowered MIDI ports.

Ultra low 3ms latency- Breakthrough latency reduction of just 3ms between two WIDI devices

Bluetooth MIDI groups- Connect up to 5 Bluetooth MIDI devices per group via WIDI App or Group Auto-learn mode

Automatic pairing- Setup instantly. Operate easily, with convenient auto-pairing between WIDI devices

Magnetic design- Clever design solution with magnetic sticker to stick on any surface

Transmit any MIDI message- Transmit any MIDI message over Bluetooth including notes, CC, MIDI clock, SysEx and MPE.

WIDI App for iOS/Android- Get lifetime updates and personalise settings with latency or jitter optimisation

What can you do with MIDI over Bluetooth?

Fully Standalone. Completely Wireless. 100% MIDI.

Notes: WIDI Bud Pro is your plug-and-play Bluetooth MIDI interface Simply add advanced wireless MIDI to PC, laptop and mobile devices without installing any drivers. Enjoy ultra-low 3ms latency and secure connectivity via Adaptive Frequency Hopping. Compatible with all major operating systems via USB

Notes: WIDI distinguishes itself from any other Bluetooth MIDI technology available through its unique SCA technology. SCA is a collection of highly effective algorithms that optimize performance and minimize interference.

Latency is reduced to an inaudible 3ms as measured between 2 WIDI devices. MIDI transmits data at a standard rate of 31.25 kbps via cable. WIDI products go up to 400 kbps.

Notes: Experience the perfect balance of power and form with the H2MIDI Pro.

Advanced features, engineered for excellence, designed for your workflow.

Seamlessly connect USB MIDI keyboards, controllers, and devices to traditional MIDI hardware without the need for a computer. Compatible with USB class-compliant MIDI instruments, including digital pianos, drum machines, portable keyboards, guitar pedals, EWIs, synthesizers, and more.

Accommodate up to 8 USB MIDI devices via an optional USB hub, providing flexibility for complex setups.

Enjoy bidirectional MIDI communication via 5-pin DIN MIDI ports, perfect for interfacing with MIDI hardware.

Easily connect to your computer via USB-C, offering 2 inputs and 2 outputs of virtual MIDI ports.

Compatible with leading operating systems, including MacOS, Windows, iOS, Android, Linux, and ChromeOS.

Master your MIDI setup with precision using the HxMIDI Tools software, available for macOS, Windows, Android, and iOS. Customize routing, apply intelligent MIDI filtering, and perform robust message remapping effortlessly.

Notes: This is the world's most versatile MIDI Interface compatible with all major operating systems via USB. Easily configure MIDI split/thru, merge, reassign and filter out any MIDI message via the free UxMIDI Tools software.

Sync all your MIDI devices with extreme accuracy, transmit any MIDI message without data errors and drop-outs. Connect your computer, laptop, mobile device via USB-C with 48 MIDI channels over 3 virtual MIDI ports.

Enjoy ultra-low 3ms latency and smart connectivity for seamless wireless performance. Benefit from WIDI groups for wireless splitting (1-to-4) and merging (4-to-1) with USB-C or DC external power options.

Master your MIDI setup with precision using the UxMIDI Tools software, available for macOS, Windows, Android, and iOS. Customize routing, apply intelligent MIDI filtering, and perform robust message remapping effortlessly.

Stay ahead of the curve with integration and customizable expansions, ensuring your setup evolves with your needs.

Notes: Desktop USB soundcard for a computer-based recording studio. Featuring 2 independent microphone inputs on XLR/jack sockets and a separate 6.3mm instrument input. Each input has a gain control and there is an optional echo effect with separate control. Monitoring is via a stereo 6.3mm headphone jack or L+R RCA line output on the rear of the unit for connecting monitor speakers. Power to the interface and two-way digital audio is connected via a USB type-C socket at the rear. Simple yet versatile operation for project studios and DAW recording setups.

Power supply: 5Vdc (from USB)
Connection: USB type-C
Controls: Mic1, Mic2, Inst3, Effect, Monitor
Input connections: 2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power: +48V switchable to XLR inputs
Frequency response: 10Hz - 30kHz (-0.5dB)
Input impedance: instrument1M Ohm
Input impedance: mic3k Ohm
Max. input sound level: Mic or Instrument +2dBu, Line +22dBu
Dynamic range: 100dB (A-weighted)
Sampling format: 48kHz, 16-bit
Monitor outputs: Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions: 160 x 110 x 57mm
Weight: 529g

In the box

The box for this item contains:

USB2+1 Audio Interface
1.5m USB C to A lead

Notes: Arturia MiniFuse 1 is a portable 1 in / 2 out audio interface audio interface designed to work for you, whatever your style. Record your vocals, guitar, podcast, or produce your track at the highest studio quality. A complete software bundle with instruments, recording software, and effects is included - recording and producing has never been easier.

MiniFuse comes from the award winning Arturia AudioFuse line of studio audio interfaces. Class-compliant & Bus-powered means you can plug in and go, and you won't need an additional power supply as it's USB powered. Recording has never been easier.

MiniFuse 1 fits right into your setup with a straightforward set of ins and outs. Its single combo input lets you easily connect either XLR or 1/4" jack cables. Plug into your computer with quick & compact USB-C compatibility. Finally, connect USB devices like your MIDI keyboard with the additional USB hub socket.

Simply the best sound

For audiophiles, MiniFuse boasts a 110db dynamic range and a class-leading equivalent input noise of -129dB. For everyone else, that means that every recording you make sounds incredible, with rich dynamics, clear noise-free signal, and studio-grade quality - you can't go wrong.

Tough, portable design

Break the mold and take your studio on the go. MiniFuse is not only compact and lightweight; its rugged aluminium casing can handle the mobile producer's lifestyle. Put it in your bag, get out there, and find the sound you've been looking for.

Fully operational

Whether you're using a laptop or desktop, MiniFuse can work for you. PC or Mac, connect it and enjoy total recording freedom. Better still, with the MiniFuse Control Center app, you can control its inputs, outputs, settings, and firmware updates in one place

Inspiration on the house

Keep your creativity fresh and your inspiration flowing with step-by-step music production tutori-als, mixing hacks, and Ableton project templates designed by artists, producers, and beatmakers, featuring the software that's included with MiniFuse. Updated frequently, no subscription re-quired, and free with your MiniFuse. MiniFuse comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge.

Arturia FX

Colour your sound with 4 premium FX plugin recreations of studio classics; a lush plate reverb, a gritty analogue preamp, a classic tape echo, and a rich stereo chorus.

Ableton Live Lite

Compose, record, perform, and produce anything with an introduction to one of the most widely-used musical software titles in the business - yours with MiniFuse.

Analog Lab Intro

Instantly add inspiring sounds from Arturia's award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds.

Auto-Tune Unlimited 3-months free subscription

Refine your vocal parts for perfect harmony or go full trap-style autotune with a 3-month sub-scription to the industry's favorite voice tuning plugin.

GUITAR RIG 6 LE

An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones.

Splice Creator Plan

3-months free subscription Access millions of hi-def royalty-free samples and plugin presets, from lo-fi drum loops to punchy vocal one-shots, and add them to your personal collection for life.

Huge software bundle includes: Ableton Live Lite, Analog Lag Intro, 4 x Arturia FX, Auto-Tune 3-month subscription, GUITAR RIG 6 LE, Splice 3-month subscription, and more...

Included Software

Ableton Live Lite: For your recording and mixing needs

Analog Lab Intro: Classic and modern synthesizer and keyboard sounds

4 x Arturia FX: A world-class preamp, plate reverb, tape echo and chorus effects

Auto-Tune Unlimited: 3-month subscription to the leading pitch tuning software

GUITAR RIG 6 LE for guitar amplification emulations and guitar

Notes: Arturia MiniFuse 1 is a portable 1 in / 2 out audio interface audio interface designed to work for you, whatever your style. Record your vocals, guitar, podcast, or produce your track at the highest studio quality. A complete software bundle with instruments, recording software, and effects is included - recording and producing has never been easier.

MiniFuse comes from the award winning Arturia AudioFuse line of studio audio interfaces. Class-compliant & Bus-powered means you can plug in and go, and you won't need an additional power supply as it's USB powered. Recording has never been easier.

MiniFuse 1 fits right into your setup with a straightforward set of ins and outs. Its single combo input lets you easily connect either XLR or 1/4" jack cables. Plug into your computer with quick & compact USB-C compatibility. Finally, connect USB devices like your MIDI keyboard with the additional USB hub socket.

For audiophiles, MiniFuse boasts a 110db dynamic range and a class-leading equivalent input noise of -129dB. For everyone else, that means that every recording you make sounds incredible, with rich dynamics, clear noise-free signal, and studio-grade quality - you can't go wrong.

Break the mold and take your studio on the go. MiniFuse is not only compact and lightweight; its rugged aluminium casing can handle the mobile producer's lifestyle. Put it in your bag, get out there, and find the sound you've been looking for.

Whether you're using a laptop or desktop, MiniFuse can work for you. PC or Mac, connect it and enjoy total recording freedom. Better still, with the MiniFuse Control Center app, you can control its inputs, outputs, settings, and firmware updates in one place

Keep your creativity fresh and your inspiration flowing with step-by-step music production tutori-als, mixing hacks, and Ableton project templates designed by artists, producers, and beatmakers, featuring the software that's included with MiniFuse. Updated frequently, no subscription re-quired, and free with your MiniFuse. MiniFuse comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge.

Arturia FX

Colour your sound with 4 premium FX plugin recreations of studio classics; a lush plate reverb, a gritty analogue preamp, a classic tape echo, and a rich stereo chorus.

Ableton Live Lite

Compose, record, perform, and produce anything with an introduction to one of the most widely-used musical software titles in the business - yours with MiniFuse.

Analog Lab Intro

Instantly add inspiring sounds from Arturia's award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds.

Auto-Tune Unlimited 3-months free subscription

Refine your vocal parts for perfect harmony or go full trap-style autotune with a 3-month sub-scription to the industry's favorite voice tuning plugin.

GUITAR RIG 6 LE

An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones.

Splice Creator Plan

3-months free subscription Access millions of hi-def royalty-free samples and plugin presets, from lo-fi drum loops to punchy vocal one-shots, and add them to your personal collection for life.

Huge software bundle includes: Ableton Live Lite, Analog Lag Intro, 4 x Arturia FX, Auto-Tune 3-month subscription, GUITAR RIG 6 LE, Splice 3-month subscription, and more...

Included Software

Ableton Live Lite: For your recording and mixing needs

Analog Lab Intro: Classic and modern synthesizer and keyboard sounds

4 x Arturia FX: A world-class preamp, plate reverb, tape echo and chorus effects

Auto-Tune Unlimited: 3-month subscription to the leading pitch tuning software

GUITAR RIG 6 LE for guitar amplification emulations and guitar

Line Inputs
Input impedance: 16kO
Maximum input level: +22dBu
Gain range: 56dB
Frequency response 20Hz to 20kHz: +/-0.05dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -100dB typical (un-weighted)
Instrument Input
Input impedance: 1MO on Tip
Maximum input level: +11.5dBu
Gain range: 56dB
Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -91dB typical (un-weighted)
Microphone Preamps
Input impedance: 2.5kO
Maximum input level: +9dBu
Gain range: 56dB
Equivalent Input Noise (EIN): -129dB typical (A-weighted)
Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -100dB typical (un-weighted)
Speakers
Output impedance: 94O
Maximum output level: +12dBu
Frequency response 20-20kHz: +/-0.09dB
Dynamic range: 107.5dB typical (A-weighted)
THD+N @ 1kHz: -101dB typical (un-weighted)
Phones
Output impedance: 10O
Maximum output level: +11.4dBu
Frequency response 20-20kHz: +/-0.09dB
Dynamic range: 104dB