サブ・ウーファー

Notes: FC10S is designed for any mid-to-large room requiring bass extension, the Fluid Audio FC10S active subwoofer is the perfect solution for recording/mixing studios, gaming rigs, home theaters any application that would require solid and accurate bass reproduction.

Many types of music benefit from bass extension from Hip-Hop, to House, to Rock. Being able to hear your mix with bass extension is critical to accurately creating your music. The FC10S subwoofer allows you to hear every detail down to 20Hz, which gets below your hearing threshold, and down to where you actually feel it.

Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why we included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.

The FC10S also has two built-in EQ settings that allow for two different settings depending on your music: A more conventional Flat response, as well as a Punch setting that is perfect for Dance or other mid-bass heavy music.

For further flexibility, the FC10S has a variable phase adjustment to fine tune the phase for optimal matching to your L/R monitors (0-180-), a variable low pass crossover filter control (50-200Hz) and a 80Hz high pass filter (used with foot switch) for satellite connections. We have also included a ground lift switch as well, to minimize ground hum with some home wiring.

Highlights
Active subwoofer
200 Watts of class D power with switching power supply
10-inch composite paper cone with high temperature voice coil and damped rubber surround
Ground lift switch
Bass-reflex vent port on front baffle for ease of placement
Amplifier standby function to conserve energy
XLR balanced and 1/4 balanced/unbalanced inputs and RCA inputs
XLR balanced and 1/4 balanced/unbalanced outputs
Variable lowpass filter control: 50Hz-200Hz
Variable Phase control: 0 180-
Switch for both Flat and Punchy settings
80 Hz highpass filter(with foot switch) for satellite connections
Included footswitch allows you to turn FC10S on and off for auditioning with bass and without

Specifications
Frequency response: 20-200Hz
Total amplifier power: 200 watts
Signal-to noise: > 100dB (typical A-weighted)
Polarity: positive signal at + input produces outward LF cone displacement
Input impedance: 20k ohms balanced, 10k ohms unbalanced
Max SPL 107dB Flat / 108dB Punchy setting
Power: factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external main fuse
cabinet: vinyl-laminated, high acoustic efficient MDF
Size: 15.25 x 12.5 x 15.5, 387 x 317 x 394mm
Weight: 28.2 lbs / 12.8 kg

Notes: Built with durability and sound quality in mind, the TS12S is Alto's most powerful subwoofer, packing a huge 2500W for professional performance from a manageable 25.9 kg package.

Supplier's Notes:
Rock-Solid Sound from the Bottom, Up

The best performances need the best in sound reinforcement at all ends of the sonic spectrum. For tight, punchy low-end look no further than the Alto Professional TS12S powered subwoofer. When added to your full-range speaker setup, the TS12S subwoofer delivers powerful but controlled low-end presence to your PA configuration for a full and complete listening experience for the modern public music space. With a powered subwoofer, any musical performance will take a giant leap into the realm of tonal balance with the perfect blend of hi, mid, and extended low-end frequencies.

The Most Powerful Subwoofer Yet

Sound reinforcement needs can change from night to night but the best in the business count on reliable power at their disposal whenever it's needed. The TS12S is Alto Professional's most powerful subwoofer yet, packing an incredible 2500 watts of power to make concert halls come alive, night clubs punch and pump, houses of worship lift-up instrumental performances, and more. Thanks to its high-efficiency Class D amplifier, TS12S adds the necessary heft and weight to any public performance for a balanced representation of musical artistry in any environment.

Carefully Built for Quality Performance

A structure is only as good as its foundation and your sound is no different. The TS12S subwoofer is built with reliable durability in mind to be the anchor of your setup and the anchor of your sound. Built with superior materials, the TS12S is engineered with a premium internally braced composite cabinet enclosure for tight, controlled sound. Enjoy all the thump and bump without the unnecessary rumbles and rattles. The key to low-end is clear definition for impactful sonic transmission and a carefully crafted enclosure ensures a truly unbiased sound delivery. With a premium 12-inch driver featuring a 3-inch, voice coil transducer, rest assured, the TS12S subwoofer is built to handle the rigors of live performance whether permanently installed or as part of a traveling setup, night after night.

A Subwoofer for Any Setting

What good is a sub if it doesn't play along nicely with the rest of your speaker setup? The TS12S is designed and engineered to fit into any system thanks to the versatile onboard electronics switches. Quickly bounce through the User-selectable EQ tunings to enable, boost, or bypass low end accentuation appropriately as different shows require. Use the intuitive Phase Alignment function as needed to make sure your tops and subs perform well no matter the setting or setup. With dedicated input and output paths, seamlessly connect your companion Alto Professional full-range loudspeakers or any other standard loudspeaker units.

Technical Specifications

Output Power: 2500W peak @ 4 O
Transducer: Low 12" (305 mm) woofer; 3" (76.2 mm) high-temperature voice coil
Frequency Response: 44 Hz - 140 Hz (- 3 dB)
Frequency Range: 38Hz-152Hz(-10dB)
Maximum SPL: 130dB(@1m)
Connections: (2) XLR+1/4" (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
External Controls: Volume control, signal/clip limiter with LED, speaker use button, proximity button, power switch with LED
Electronic Protections: Electronic clip, thermal and transducer overdrive protection
Enclosure: Internally braced MDF cabinet; 36 mm mounting pole socket on top panel

Power

Connection: Standard IEC cable
Input Voltage: 100-120, 50/60 Hz; 220-240 VAC 50/60 Hz
Consumption: 1600W
Fuse: 100-120V, T15AL AC250V; 220-240V, T8AL AC250V
Dimensions (height x width x depth): 17.9" x 18.1" x 19.9" / 454.7 x 459.7 x 505.5 mm
Weight 57.1 lbs. / 25.9 kg

Notes: The ideal low-frequency addition to your PA setup, the TX12S offers loud, clear bass reproduction in a convenient package. Digital EQ options allow the sound to be tailored for recorded or live music playback.

Supplier's Notes:
The Alto Professional TX12S is a powerful and affordable solution to producing ground shaking bass in small to mid-sized spaces. Perfect for musicians and small business owners, looking to revamp their rehearsal space or intimate performance spaces, this subwoofer powerfully extends the lower frequencies of just about any PA speaker and ensures a sonic experience that can be heard and felt in equal measure. In addition to being budget friendly and versatile, this unit was designed with ease at the forefront-the TX12S is simple to set up and built to last.

Thanks to a 12-inch driver with a 2-inch voice coil, the TX12S can handle the nuanced, deep bass frequencies that are all too commonly lost when using standard full-range speakers. The powerful onboard 900W amplifier comes equipped with overload protection that will ensure your low end is clean and clear even at full blast.

One of the TX12S's most powerful features is its two different Live and Music EQ voicing modes and selectable Low Pass Filters. This allows users to switch the subwoofers frequency response to seamlessly integrate with any speaker it is being used alongside and where the music is being played. These pared down and straightforward parameters change the EQ to fit your surroundings with the press of a button as opposed to having to fuss with complicated, multifaceted controls.

The TX12S is built to withstand any wear and tear that may occur. The subwoofer's enclosure is made from fiberboard that is durable, resonant-free, and actually enhances the unit's inherent acoustic qualities. In addition, this subwoofer and all other products in the TX Series are designed and tuned in the United States.