MIDIコントローラー

Notes: You can never have too many knobs, right? The PC4 packs 24 rotary pots into a handy little box, allowing you to control software and hardware parameters over MIDI. Nice.

Supplier's notes:
PC4 is a universal controller for all kinds of midi controllable hard- and software.

The device has 24 standard pots with rubber knobs designed in a 4 x 6 matrix. Various kinds of midi commands like control change, pitchbend and program change are possible.

Of course you can assign the pots to any of these commands by learning incoming midi commands like software it does. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instruments, effects and DAW's. Use the internal 16 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn't necessary for many applications.

A special feature is the switchable snap function for all pots. This simple function is very rare on standard midi controllers with pots. It avoids possible annoying value jumps.

Three switchable midi routings makes the unit much more flexible for complex midi setups.

Simultaneous control of external gear and software instruments is no problem for the PC4 due to the available USB and MIDI ports.

Notes: The usual solid MIDI Fighter build quality and LED feedback combine with rotary encoders and push-button options in the Twister. Configure it for your chosen software and get creative.

*** Midi Fighter Utility Update- 2.90 (July 2024) ***

A new version of the Midi Fighter Utility is now available! DJ Tech Tools focused this release on implementing some community feedback and fixing the connectivity issues that disabled online firmware updates in the past. Be aware that since 2.85 and previous releases can't go online you won't be notified via the app that an update is available. Future firmware and utility updates will work fine moving forward.

In order to use this software plug in your Midi Fighter directly to your computer via USB (DO NOT USE A USB HUB) and follow the onscreen instructions in the utility. You'll be prompted to update your firmware as new firmware updates are available. If no new firmware updates are available, it's time to use!

Release Notes (2.90)

Fixed server connectivity issues
Fixed factory firmware flashing (Windows)
Fixed invisible options in drop down menus
Replaced Checkboxes with toggle switches
Fixed naming inconsistencies between "Midifighter" and "Midi Fighter"
Fixed model and firmware text scaling (Windows)
Improved text scaling for better visibility on large screens
General design update for an improve experience in low light
Increased log window width for improved readability
Updated app icon
Updated flashing status icons
Updated Midi Fighter 3D and 64 layout graphics

Supplier's Notes:
The most playable knob controller around.

Each knob doubles as a super powerful button. Turn the encoders to control a parameter in any software and twist their built in buttons to quickly reset the knobs or turn effects on and off. This means each knob is like 3 knobs.

The heart of the Twister are the 16 "Endless Encoders". These are very powerful knobs that don't have a start or ending point. Instead the LED rings show you the position of the knob. This means that the controller and the software are always in sync, even when changing banks, racks or songs on the fly.

The Twister allows for deep customization of every knob across all 4 banks with 5 killer features not found on any other controller. Change LED color, transform an encoder into a DJ filter, enable fine midi control, toggle a parameter on/off, or setup a "shift" knob so pressing a push-encoder activates control of a secondary function

The Midi Fighter twister was designed with producers in mind. We need compact, reliable controllers that are easy to map to our DAW's. The endless encoders respond to the software so everything is always in sync, even when playing back recorded automation.

Combine The Twisters powerful knobs with a DAW template so that every time inspiration strikes, a powerful studio environment is there to support you. This is how the pro's do it - why wouldn't you?

The knobs not only control your typical volume, pan and FX send controls but they also enable a host of quick access to deeper control - only available on the twister. For example, push the encoder to send out a fine resolution range and dial in the exact EQ setting you want. Release and return to normal range control.

You need to be able to react to the dancefloor. Having a dedicated controller is just like being a practiced instrumentalist. Once you have a idea, you can just make it happen as soon the inspiration hits.

*** Firmware update June 2023 ***

If you just bought your Midi Fighter Twister or haven't used the utility in a while chances are you might need to update it's firmware with the latest and greatest. This is a fairly straightforward process as long as you take some extra precautions.

1. Download and install the MF Utility if you don't have it already on your computer (PC/Mac).

2. After you check that any other MIDI related applications (Ableton, Traktor, etc) are closed connect your Twister directly to your computer and open the MF Utility. DO NOT USE A USB HUB

3. Click on "File>Export Settings" and select a destination, this will back up your Twister's settings if you have customized your Twister beforehand and make sure you export it outside of the "Midi Fighter Utility" folder since your OS might lock this location and prevent the MFS file from being generated successfully. If you just got your Twister you can skip this step.

4. If a new firmware is available for your device you should see a message in the utility as soon as your device is detected.

5. Click on the orange UPDATE FIRMWARE button and accept the pop up message warning you not to use a USB hub.

6. Once this process finishes your device will reboot and the MF Utility will now show it has successfully updated the firmware!

Notes: The next generation of Ableton Live controller from Akai, the APC64 is designed for seamless integration with the software, or as a standalone step sequencer and controller. The 64 velocity sensitive pads handle playing, recording, clip launching, sequencing and much more, while eight assignable touch strips offer extensive hands-on control.

Supplier's notes:

APC64; Next generation Ableton live controller.

Touch the future

Leap into a new world of musical possibility in the studio, on stage, and anywhere creativity leads you with the powerful APC64.

Ableton live controller; with sequencer and touchstrips

The new Akai Professional APC64 is a powerful next-generation Ableton Live controller for studio and live performance.

It features 64 RGB velocity-sensitive pads with poly aftertouch, and 8 fully assignable Touch Strips for instant hands-on control of devices, pitch, modulation, and much more. APC64 also works as a standalone 32-step 8-track Step Sequencer and controller with 3 MIDI ports and 8 CV/Gate outputs to take full control of synths, drum machines, or modular rack devices.

In-depth control of Ableton Live

Enter the matrix

APC64 features a vibrant 8x8 pad matrix of 64 velocity-sensitive RGB pads with poly aftertouch for playing chords, synth leads, Ableton Live's Drum Racks and of course launching Clips in Session View.

Touch the future

Add a whole new level of expression and control to your music production and live performances with 8 fully assignable Touch Strips with RGB LED indicators. Get control of Ableton Live's devices - including Auto Filter, Delay, Reverb, Impulse, Simpler and more - right at your fingertips. Adjust macros, mixer volume, pan, and effects sends as well as writing automation.

Visual feedback and control

APC64 includes a smart colour LED screen with a fast push encoder for real-time visual feedback of your parameters. Move around Ableton Live's devices and mixing environments while keeping track of each parameter on the screen. APC64 also features dedicated transport control with Play, Stop, and Record for capturing your ideas along with 8 Track Mute and Solo buttons for mixing and live performance.

Standalone step sequencing

APC64 features an internal 32-step 8-track Step Sequencer enabling completely DAW-less control of your favourite synths. With 8 CV/Gate outputs and 3 1/8" MIDI ports, you can connect, sequence, and capture your favourite modular racks, keyboards, classic drum machines, and more. Add continuous control and expression using the 8 Touch Strips for a whole new level of performance. Apply additional creative dimensions to MIDI notes using the Probability, Velocity, and Mutate functions for further experimentation.

Powerful production and performance

APC64 facilitates a seamless workflow within Ableton Live; from triggering samples and loops in Ableton Live's Drum Rack, all the way to writing expressive melodies using the Notes, Scale, and Chord modes. Use the onboard Step Sequencer to generate inventive melodic patterns that can be instantly transferred to Ableton Live using the Send To Clip function. Apply swing and quantize to your beats or use APC64 to arm and record vocal tracks directly in Ableton Live sessions.

Ableton drum rack/simpler control

APC64 features a dedicated Drum Mode allowing you to play and record beats, loops, and slices using an Ableton Live Drum Rack or Simpler device. Capture additional inspiration using the 8 Touch Strips to control Ableton Live's FX racks during beat making and performance.

Included software bundle

Ableton Live Lite 11

APC64 Includes Ableton 11 Lite for all your software music production needs in one package to produce, perform, arrange, record, edit, mix and master your music. Live Lite includes sounds, instruments, and sequencing, recording, and arranging capabilities.

Air music instruments/plugins

APC64 Includes a collection of professional plug-in instruments and effects so you can start producing out of the box. Included are the following plugins: TubeSynth, Electric, Ether, Halfspeed, Vocal Tuner, Flavor, and the Sonivox Essential Keyboard Collection.

Custom editor software

Create your own custom layouts with the included desktop software editor for Mac/PC to personalize and store pre-sets for quick recall in standalone.

Key specs

Display
Graphical full colour LCD
Connections: USB-C, 8x 1/8" (3.5 mm) CV/Gate, 2x 1/8" (3.5 mm) MIDI Output, 1x 1/8" (3.5 mm) MIDI Input
Dimensions (width x depth x height): 10.7" x 14.6" x 1.4" 272 x 371 x 34.5 mm
Weight: 3.5 lb/1.6 kg

Notes: Simple, straightforward and effective. The XVI-M offers 16 high-resolution faders, 16 programmable buttons and MIDI output over USB or TRS. Solidly built metal enclosure promises durability.

Supplier's Notes:
XVI-M MIDI Controller, 16 Faders, 16 programmable buttons, 14bit resolution

XVI-M Desktop is a 16 channel desktop MIDI control surface.

Features:

Long throw LED 60mm faders
USB MIDI, MIDI TRS#1 and MIDI TRS#2 outputs
USB Powered (USB C, Cable included). Stand alone adapter available but NOT included
14bit (MIDI Pitchbend) resolution faders. Can be set to any 7 bit CC or NRPN/RPN
Online parameter editor: https://misw.us/editor
Fader output can be routed to USB MIDI, TRS MIDI A or TRS B
3 color programmable button can be momentary, 1 state toggle, 2 state toggle, or 3 state toggle with each state sending a MIDI msg
Durable metal case
Includes:

XVI-M Control Surface
USB C to USB A cable (2m)
1.5m TRS A to MIDI DIN cable

Notes: A versatile, multi-purpose controller with two endless rotary pots and eight push buttons, the TEK2 works for a range of production and mixing purposes (as well as video editing). Simple and high quality.

Supplier's Notes:
Welcome to TEK2, the freshest Grid module equipped with a pair of endless rotary potentiometers (jog wheels) and eight clicky buttons.

TEK2 is a gateway modular controller from audio to video editing, offering a 5-point multicolour LED feedback and massive jog-wheel knobs with a two-state switch (pressed & released) in addition to their smooth endless turn. The programmable '5-bit display' indicator is perfect for giving feedback on cantered or starting value positions and highlighting parameter states.

Both potentiometers come with 5-point LED feedback, creating a brand new perspective among Grids. Such a '5-bit display' indicator is perfect for giving feedback on cantered or starting value positions and highlighting parameter states. The large knobs are accompanied by a set of 8 tactile buttons which can act like shift buttons, toggles or triggers - easing the way for quick mode switches, dynamic settings navigation and active function changes of the two massive knobs.

Grid controllers are built with quality control elements. The modules are made to withstand everyday studio use as well as the intense performances during tours. For connecting several Grids together, a flat surface or the use of our module stand is recommended.

TEK2 is made for multimedia creatives boasting a distinguished audiovisual skillset, from 3D and video editing to sound design. Whether it comes to controlling outboard hardware gear like synthesizers, guitar pedals, and effect boxes, or inboard software such as DAWs, Lightning, and VSTs, a Grid controller is an ideal choice.

The control surface built from several Grid controllers can be powered through a single USB-C cable. The controllers share power through their interface boards with spring loaded connectors.

Compatibility:
Grid is compatible with MacOS, Windows, Catalina+ and Linux. As class compliant MIDI devices, Grid controllers work under mobile platforms as well, including iPad OS, iOS and Android.

Grids are created to suit distinguished workflows. Whether it comes to controlling outboard hardware gear like synthesizers, guitar pedals, and effect boxes, or inboard software such as DAWs, Lightning, and VSTs, a Grid controller is an ideal choice.

Get started with Grid in an instant: just plug in, snap together and play. There is no need for a brain module or any additional software components.

It is recommended that, Grid is connected directly to the computer with the supplied Intech Studio USB-C cable. Some USB hubs may not work with Grid, due to issues with how the various class compliant communication methods establish connection through a hub with the host computer.

Most digital audio workstations can identify Grid as a MIDI controller and appear as a MIDI mappable device. When multiple modules are interconnected, Grid is identified as a single control surface. If the interconnected controllers are plugged in separately into the same Host, they appear as Grid #1, Grid #2 MIDI devices and so forth.

By default, through the Host's MIDI learn functionality, all of the control elements can be mapped. Grid's default firmware uses a unique dynamic assignment, so a 10 module Grid control surface will have unique Channel, Command and CC/Note assignments on each control element.
Grid controllers are shipped with firmware default configuration. To modify the configurations of the controllers, the Grid Editor cross-platform application can be used. Through the Grid Editor, suggested manufacturer profiles and community profiles are also available. Grid has an event driven architecture, where every interaction with the controller triggers an event. The triggered event runs the configured actions, like setting LED colours and intensity.

Tech specs

Weight: 225g (~ 8 oz)
Size: 106 mm x 106 mm (4.19 x 4.19 inches) Eurorack-sized modules
2 endless rotary potentiometers in black with mappable press-release functionality
5-step customizable multi-coloured LED lights for easy labelling in dark environments
8 tactile clicky buttons in white with 1-point LEDs

Materials

Black aluminium front panel with a metallic, rugged finish
Ergonomic, metal knobs in black
Injection moulded plastic base
Golden spring-loaded connector pins
Strong N52 neodymium magnet
Silicone feet on the back for extra stability

Compatibility

Class compliant MIDI device with simple PnP (Plug and Play) experience
USB HID keyboard class
Compatible with Mac OS (intel & arm), Windows, Linux and mobile platforms with support provided

Notes: *** Midi Fighter Utility Update- 2.90 (July 2024) ***

A new version of the Midi Fighter Utility is now available! DJ Tech Tools focused this release on implementing some community feedback and fixing the connectivity issues that disabled online firmware updates in the past. Be aware that since 2.85 and previous releases can't go online you won't be notified via the app that an update is available. Future firmware and utility updates will work fine moving forward.

In order to use this software plug in your Midi Fighter directly to your computer via USB (DO NOT USE A USB HUB) and follow the onscreen instructions in the utility. You'll be prompted to update your firmware as new firmware updates are available. If no new firmware updates are available, it's time to use!

Release Notes (2.90)

Fixed server connectivity issues
Fixed factory firmware flashing (Windows)
Fixed invisible options in drop down menus
Replaced Checkboxes with toggle switches
Fixed naming inconsistencies between "Midifighter" and "Midi Fighter"
Fixed model and firmware text scaling (Windows)
Improved text scaling for better visibility on large screens
General design update for an improve experience in low light
Increased log window width for improved readability
Updated app icon
Updated flashing status icons
Updated Midi Fighter 3D and 64 layout graphics


Built to last, the MIDI Fighter Twister features 16 endless rotary encoders, each of which doubles as a button. Available here in a sleek white finish.

Supplier's Notes:
Flexible MIDI control for all creative uses
16 high resolution Chroma Cap encoders
Integrated push switches on every knob
Full LED feedback that syncs with software

With four banks of 16 encoders, the Midi FighterTwister allows control of any parameter in any software. You can easily customize layouts to suit your favorite setups, giving you a smooth and intuitive workflow.

What Makes The Twister Great?

Perfect studio addition for any level producer or musician
Out-of-the-box compatible with ALL major music software
Great for DJs that want to expand their setup and get creative
Fully customizable!

Complete Control

Four banks of 16 high-resolution encoders with a configurable button on every knob. Little space, lots of control.

Dynamic LED Feedback

Multi coloured LED rings that provide clear feedback on a knob's position. Always know what's happening without getting lost in the software.

Easy to Integrate

Compact and completely USB-powered, the Midi Fighter Twister is easy to fit into any gear bag and integrate into every work flow.

Professional Grade MIDI Controller For Music Software

Professional musicians use MIDI controllers so they don't waste creative time clicking a mouse. The Midi Fighter Twister is one of the most popular MIDI controllers available and works great with Ableton,Traktor, Resolume and all other software that support MIDI Input and Output.

Provides valuable visual feedback - You know what's happening in the software.

Plug and play - Works out of the box without any power supply.

Professional Grade - Trusted on stage and studio by the best in the world.

Why Musicians Swear By The Midi Fighter Twister

Touring artists around the world including Satori, Weval and KINK rely on the Midi Fighter every night to play their music. Why do so many choose the Twister?

Custom map your set - Unlike other controllers, you can map Ableton to the Twister in the way that's most intuitive for you.

Keep the laptop to the side with visual feedback - The Twister provides visual feedback for how knobs and sliders are positioned in Ableton, allowing you to keep the laptop off to the side.

Control your entire set with 16 knobs - The Twister provides an enormous amount of control over your set with 16 knob in a small format.

Double The Controls

Four banks of 16 high-resolution encoders with a configurable button on every knob. Small space, lots of control.

Dynamic LED Feedback

Multicoloured LED rings that provide clear feedback on a knob's position. Always know what's happening without getting lost in the software.

Rock Solid Construction

Built with the highest quality parts in the world, the Midi Fighter has been built to play hard by professional musicians and DJs.

More Control - Less Gear

Alps (the most trusted maker of knobs) built custom knobs for the Twister that are smooth as butter and can be pressed like a button. The only ones on the planet, these two controls double your creation power, and makes it easy to play music without thinking.

Turn on an effect, and control it - with the same knob.

Get very precise - Pressing the knob can switch to high resolution mode for precise EQ adjustments.
Two knobs in one - Start by turning up the reverb, and then hold down the knob and that same turn can now control a filter.

Deep Customization

The easy to use utility allows you to customize what each knob/button does for totally personalized control.

Three In One

On the Twister one knob can equal up to three controls, giving you a lot of power in a small space.

Automatic Mapping

On Mac computers the Twister will automatically turn any knob you select with your cursor. No more mapping hassles.

Why Is An Endless Encoder So Powerful For Music Making?

The "Endless Encoder" is a knob that keeps turning forever without any clicks or stops. This allows one knob to control ANYTHING in your software, from filters to tempo.

Always In Sync

Adjust a knob in Ableton, and the encoder will instantly update to reflect the change. Only endless encoders can do this.

Your Versatile Friend

Each encoder can be three different styles of knob, and is always there for you when you need it.

16 Encoders = 64 knobs

Because encoders change postition as you switch pages (unlike fixed knobs) you actually get 64 controls in one tiny space.

Technical Details

Key Features:
16 high resolution encoders with integrated push switch and LED feedback
6 side mounted function keys
Highly portable form factor
USB bus powered - no wall adapter required
USB 2.0 Type B connector (cable included)
Artists Are Saying:
"The Midi Fighter Twister is exactly what was missing from the world of CC based controllers. The push encoders are the perfect nexus of button and knob, cleverly programmable and designed with the level of quality and polish characteristic of DJ Tech Tools." - Ill Gates

Notes: XVI-M MIDI Controller, 16 Faders, 16 programmable buttons, 14bit resolution

XVI-M Desktop is a 16 channel desktop MIDI control surface.

Features:

Long throw LED 60mm faders
USB MIDI, MIDI TRS#1 and MIDI TRS#2 outputs
USB Powered (USB C, Cable included). Stand alone adapter available but NOT included
14bit (MIDI Pitchbend) resolution faders. Can be set to any 7 bit CC or NRPN/RPN
Online parameter editor: https://misw.us/editor
Fader output can be routed to USB MIDI, TRS MIDI A or TRS B
3 color programmable button can be momentary, 1 state toggle, 2 state toggle, or 3 state toggle with each state sending a MIDI msg
Durable metal case
Includes:

XVI-M Control Surface
USB C to USB A cable (2m)
1.5m TRS A to MIDI DIN cable

Notes: The best buttons in a professional MIDI controller
High performance MIDI controller
Designed to stand up to rigors of touring artists
Full colour configurable arcade buttons
Limited editions available with rare button colours/types
Built on the familiar format of DJ TechTools' legendary Midi Fighter line, the Spectra is back! It has full-colour ring lighting, six side-mounted, configurable function buttons, and support for all software that supports MIDI including Traktor, Ableton, Serato and more. These are the best buttons in the world.

*** Midi Fighter Utility Update- 2.90 (July 2024) ***

A new version of the Midi Fighter Utility is now available! DJ Tech Tools focused this release on implementing some community feedback and fixing the connectivity issues that disabled online firmware updates in the past. Be aware that since 2.85 and previous releases can't go online you won't be notified via the app that an update is available. Future firmware and utility updates will work fine moving forward.

In order to use this software plug in your Midi Fighter directly to your computer via USB (DO NOT USE A USB HUB) and follow the onscreen instructions in the utility. You'll be prompted to update your firmware as new firmware updates are available. If no new firmware updates are available, it's time to use!

Release Notes (2.90)

Fixed server connectivity issues
Fixed factory firmware flashing (Windows)
Fixed invisible options in drop down menus
Replaced Checkboxes with toggle switches
Fixed naming inconsistencies between "Midifighter" and "Midi Fighter"
Fixed model and firmware text scaling (Windows)
Improved text scaling for better visibility on large screens
General design update for an improve experience in low light
Increased log window width for improved readability
Updated app icon
Updated flashing status icons
Updated Midi Fighter 3D and 64 layout graphics


What Makes The Spectra Great?

Every night around the world professional DJs, VJs and musicians rely on the Midi Fighter because:

Engineered to Last

The buttons alone are rated at 5 million presses - which essentially mean they will never break. You can be confident this controller will survive any tour.

Musical Feel

Arcade buttons bounce back with spring loading for ultra fast playback and easy triplets & drum rolls. It's popular for a reason.

Easy To Carry

Small footprint that won't bloat your gig bag and fits easily in the DJ booth.

The Best Buttons In The World

Most MIDI controllers feel like a plastic toy with the same buttons as your TV remote. The Midi Fighter Spectra is a professional grade instrument with the best buttons in the world, genuine Sanwa arcade buttons. These are built to take a beating and are a joy to play.

MIDI Fighter Spectra Buttons:
Cost $2.50 each
Rated to last 5 million presses
Full 2mm of travel
Bounces back like a real drum
Made in Japan in small quantities
Ball bearing contacts work every time
Clear audible feedback
Only on the Midi Fighter
Industry leading ultra low latency

Why is the Arcade button so popular?

The arcade button is a one of a kind with unique mechanics and feel that is built to be played hard!

Rapid Fire Play - The button is spring loaded and bounces back like a real drum for ultra fast triggers.

Clear Musical Action - With 10mm of musical travel and a clear audible feedback when pressed, this button plays like an instrument should.

Start playing music instantly

SoundPacks are a new plug and play standard. They keep the drums and instruments in the same place on a 16 button grid, so you can load up any pack and instantly start getting creative. The Midi Fighter Spectra is the instrument of choice for anyone playing SoundPacks and finger drumming.

Start Playing Today - Thousands of SoundPacks are available for free

Musical Talent Required - FingerDrumming is a real musical skill that is a lot of fun and the Midi Fighter Spectra is the better choice of controller for serious finger drummers.

16 buttons = One song - Each pack intuitively places a full song on 16 simple buttons making it possible to get incredibly creative, quickly.

Technical Details

Key Features:
Built proper, you can pass it onto your grandkids and it will keep ticking
Map its buttons to any midi-compatible effect or software
Official mappings for popular DJ and production software
Customizable, animated LED colour rings

Requirements:
The Midi Fighter Spectra is a class compliant, plug and play controller
Works with any computer that has a USB port and supports MIDI
Connector: USB 2.0 Type B (cable included)

Size + Weight:
Height: 6" / 15.24cm
Width: 6" / 15.24cm
Depth: 1.5" / 3.81cm
Weight: 1.3lb / 0.6kg

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Chorda by Artiphon is a versatile, all-in-one musical instrument that combines the features of a guitar, piano, drums, and synthesizer - making it easy for anyone to create a wide variety of music. It's user-friendly, offering over 100 different sounds and touch-sensitive pads for expressive playing, ideal for both music enthusiasts and beginners.

An instrument built for you.

Chorda is the all-in-one instrument that adapts to the way you play. Whether you strum it like a guitar, play it flat like a piano, or hold it over your shoulder like a violin, Chorda will adjust to your style, making it the perfect instrument for both music enthusiasts and beginners alike.

Play every part of the song.

With Chorda's built-in synthesizer, you can easily create full songs by switching between the four instrument parts (Drum, Bass, Chord, and Lead) directly on the device. Each mode has unique capabilities, with hundreds of sounds to choose from.

Loop and layer.

Chorda's built-in looper lets you record and layer the four instrument parts, creating songs in seconds. Start with a drum beat, add a groovy bass line, throw in some angelic chords, and improvise a solo with a lead melody for as long as you want.

Adapts to the way you play.

Play Chorda like a guitar, flat like a piano, or hold it over your shoulder like a violin -- Whatever your style may be, Chorda will adjust to you.

Go beyond the touchscreen.

Use Chorda as a Bluetooth MIDI Polyphonic Expression (MPE) controller to take your production to new heights. Controlling your favourite music apps and software like Ableton, Garageband, Logic Pro, and more. You can even use MIDI to control your hardware instruments.

Smart playing modes

Chorda boasts a Strumable smart bridge, built-in arpeggiator, snap-to-grid and groove quantization, traditional set keys, an array of customizable settings, and effects to take your musical production to new heights!

Choose from hundreds of sounds.

Change sounds with the Artiphon Connect companion app. The app offers a diverse selection of over 100 sounds, drawing inspiration from various genres like Hip-Hop, EDM, Rock, and even traditional instruments such as violins and horns.

Or sample your own.

Create your own sounds and instruments with audio sampling in the app. Load them into Chorda, and it automatically adjusts to your chosen scale, allowing you to craft the perfect song with your own unique sounds.

On-the-go playing.

With Chorda's built-in speaker, onboard sounds, headphone jack, and rechargeable battery you can play anywhere creativity strikes.

Tech Specs

What's in the box?

Chorda
USB Cable
Quickstart Guide

Dimensions
440 mm (W) x 59mm (D) x 29mm (H)

I/O
USB-C (USB 2.0 Class Compliant Audio/MIDI)
3.5mm (1/8") TRS Analog Headphone Stereo Out

Features

Multi-coloured LEDs
12 capacitive sense/ touch-sensitive pads
Built-in accelerometer
Built-in Gyroscope
Embedded Haptic feedback
Smart-strum bridge with 6 triggers
(A) menu button
Power + volume button
Built-in battery (up to 5 hours of battery life)
MIDI Polyphonic Expression (MPE) Support

Bluetooth
Bluetooth LE MIDI (MIDI only)
Note: Windows 10 does not currently support Bluetooth LE MIDI

Speaker System
3W built-in active speaker system

Compatibility
iOS 11 and newer
Android 9 and newer
macOS 10.12 and newer
Windows 10 (64 bit)

Notes: ***B-STOCK: Box opened, product in perfect working order***


The usual solid MIDI Fighter build quality and LED feedback combine with rotary encoders and push-button options in the Twister. Configure it for your chosen software and get creative.

*** Midi Fighter Utility Update- 2.90 (July 2024) ***

A new version of the Midi Fighter Utility is now available! DJ Tech Tools focused this release on implementing some community feedback and fixing the connectivity issues that disabled online firmware updates in the past. Be aware that since 2.85 and previous releases can't go online you won't be notified via the app that an update is available. Future firmware and utility updates will work fine moving forward.

In order to use this software plug in your Midi Fighter directly to your computer via USB (DO NOT USE A USB HUB) and follow the onscreen instructions in the utility. You'll be prompted to update your firmware as new firmware updates are available. If no new firmware updates are available, it's time to use!

Release Notes (2.90)

Fixed server connectivity issues
Fixed factory firmware flashing (Windows)
Fixed invisible options in drop down menus
Replaced Checkboxes with toggle switches
Fixed naming inconsistencies between "Midifighter" and "Midi Fighter"
Fixed model and firmware text scaling (Windows)
Improved text scaling for better visibility on large screens
General design update for an improve experience in low light
Increased log window width for improved readability
Updated app icon
Updated flashing status icons
Updated Midi Fighter 3D and 64 layout graphics

Supplier's Notes:
The most playable knob controller around.

Each knob doubles as a super powerful button. Turn the encoders to control a parameter in any software and twist their built in buttons to quickly reset the knobs or turn effects on and off. This means each knob is like 3 knobs.

The heart of the Twister are the 16 "Endless Encoders". These are very powerful knobs that don't have a start or ending point. Instead the LED rings show you the position of the knob. This means that the controller and the software are always in sync, even when changing banks, racks or songs on the fly.

The Twister allows for deep customization of every knob across all 4 banks with 5 killer features not found on any other controller. Change LED color, transform an encoder into a DJ filter, enable fine midi control, toggle a parameter on/off, or setup a "shift" knob so pressing a push-encoder activates control of a secondary function

The Midi Fighter twister was designed with producers in mind. We need compact, reliable controllers that are easy to map to our DAW's. The endless encoders respond to the software so everything is always in sync, even when playing back recorded automation.

Combine The Twisters powerful knobs with a DAW template so that every time inspiration strikes, a powerful studio environment is there to support you. This is how the pro's do it - why wouldn't you?

The knobs not only control your typical volume, pan and FX send controls but they also enable a host of quick access to deeper control - only available on the twister. For example, push the encoder to send out a fine resolution range and dial in the exact EQ setting you want. Release and return to normal range control.

You need to be able to react to the dancefloor. Having a dedicated controller is just like being a practiced instrumentalist. Once you have a idea, you can just make it happen as soon the inspiration hits.

*** Firmware update June 2023 ***

If you just bought your Midi Fighter Twister or haven't used the utility in a while chances are you might need to update it's firmware with the latest and greatest. This is a fairly straightforward process as long as you take some extra precautions.

1. Download and install the MF Utility if you don't have it already on your computer (PC/Mac).

2. After you check that any other MIDI related applications (Ableton, Traktor, etc) are closed connect your Twister directly to your computer and open the MF Utility. DO NOT USE A USB HUB

3. Click on "File>Export Settings" and select a destination, this will back up your Twister's settings if you have customized your Twister beforehand and make sure you export it outside of the "Midi Fighter Utility" folder since your OS might lock this location and prevent the MFS file from being generated successfully. If you just got your Twister you can skip this step.

4. If a new firmware is available for your device you should see a message in the utility as soon as your device is detected.

5. Click on the orange UPDATE FIRMWARE button and accept the pop up message warning you not to use a USB hub.

6. Once this process finishes your device will reboot and the MF Utility will now show it has successfully updated the firmware!

Notes: Chorda by Artiphon is a versatile, all-in-one musical instrument that combines the features of a guitar, piano, drums, and synthesizer - making it easy for anyone to create a wide variety of music. It's user-friendly, offering over 100 different sounds and touch-sensitive pads for expressive playing, ideal for both music enthusiasts and beginners.

An instrument built for you.

Chorda is the all-in-one instrument that adapts to the way you play. Whether you strum it like a guitar, play it flat like a piano, or hold it over your shoulder like a violin, Chorda will adjust to your style, making it the perfect instrument for both music enthusiasts and beginners alike.

Play every part of the song.

With Chorda's built-in synthesizer, you can easily create full songs by switching between the four instrument parts (Drum, Bass, Chord, and Lead) directly on the device. Each mode has unique capabilities, with hundreds of sounds to choose from.

Loop and layer.

Chorda's built-in looper lets you record and layer the four instrument parts, creating songs in seconds. Start with a drum beat, add a groovy bass line, throw in some angelic chords, and improvise a solo with a lead melody for as long as you want.

Adapts to the way you play.

Play Chorda like a guitar, flat like a piano, or hold it over your shoulder like a violin -- Whatever your style may be, Chorda will adjust to you.

Go beyond the touchscreen.

Use Chorda as a Bluetooth MIDI Polyphonic Expression (MPE) controller to take your production to new heights. Controlling your favourite music apps and software like Ableton, Garageband, Logic Pro, and more. You can even use MIDI to control your hardware instruments.

Smart playing modes

Chorda boasts a Strumable smart bridge, built-in arpeggiator, snap-to-grid and groove quantization, traditional set keys, an array of customizable settings, and effects to take your musical production to new heights!

Choose from hundreds of sounds.

Change sounds with the Artiphon Connect companion app. The app offers a diverse selection of over 100 sounds, drawing inspiration from various genres like Hip-Hop, EDM, Rock, and even traditional instruments such as violins and horns.

Or sample your own.

Create your own sounds and instruments with audio sampling in the app. Load them into Chorda, and it automatically adjusts to your chosen scale, allowing you to craft the perfect song with your own unique sounds.

On-the-go playing.

With Chorda's built-in speaker, onboard sounds, headphone jack, and rechargeable battery you can play anywhere creativity strikes.

Tech Specs

What's in the box?

Chorda
USB Cable
Quickstart Guide

Dimensions
440 mm (W) x 59mm (D) x 29mm (H)

I/O
USB-C (USB 2.0 Class Compliant Audio/MIDI)
3.5mm (1/8") TRS Analog Headphone Stereo Out

Features

Multi-coloured LEDs
12 capacitive sense/ touch-sensitive pads
Built-in accelerometer
Built-in Gyroscope
Embedded Haptic feedback
Smart-strum bridge with 6 triggers
(A) menu button
Power + volume button
Built-in battery (up to 5 hours of battery life)
MIDI Polyphonic Expression (MPE) Support

Bluetooth
Bluetooth LE MIDI (MIDI only)
Note: Windows 10 does not currently support Bluetooth LE MIDI

Speaker System
3W built-in active speaker system

Compatibility
iOS 11 and newer
Android 9 and newer
macOS 10.12 and newer
Windows 10 (64 bit)