USD
Filter
Back catalogue: All genres
Juno's full catalogue of All genres
こんな商品も購入されています...
AE Modular 1-Row 20x1 Wide Module Case (synth module case)
Cat: 786525 Rel: 19 Oct 20
20x1 rack case for Tangiible Waves AE Modular
Notes: The 1-row rack for AE modular is 20 units wide; two of them are used by the MASTER module so you have 18U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:51.5 x 11.2 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:51.5 x 11.2 x 4.5 cm (width x depth x height)
out of stock $37.19
こんな商品も購入されています...
AE Modular 12U Eurorack Adapter Frame (Eurorack adapter frame)
Cat: 719730 Rel: 03 Sep 19
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.
The product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
… Read moreThe product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
out of stock $31.01
こんな商品も購入されています...
AE Modular 1U Blank Module Plate (blank module)
Cat: 719722 Rel: 02 Sep 19
Blanking plate for AE modular - 1U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
… Read moreout of stock $3.10
こんな商品も購入されています...
AE Modular 2-Row 12x2 Narrow Case (synth module case)
Cat: 786519 Rel: 19 Oct 20
12x2 narrow case for Tangible Waves AE modular
Notes: This 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
out of stock $47.06
こんな商品も購入されています...
AE Modular 2-Row 12x2 Narrow Case (B-STOCK) (synth module case)
Cat: 936906 Rel: 19 Oct 20
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***
This 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
… Read moreThis 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)
out of stock $35.57
こんな商品も購入されています...
AE Modular 2-Row 16x2 Standard Synth Module Enclosure Case (bamboo wood) (synth module enclosure case)
Cat: 807736 Rel: 24 May 21
16x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
out of stock $67.07
こんな商品も購入されています...
AE Modular 2-Row 20x2 Wide Bamboo Wood Case (eurorack module case)
Cat: 809646 Rel: 24 May 21
20x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
out of stock $81.74
こんな商品も購入されています...
Notes: The 2-row rack for AE modular is 20 units wide with 2 rows; the MASTER module consumes 2 units so you have 38U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 51.5 x 21.7 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 51.5 x 21.7 x 4.5 cm (width x depth x height)
out of stock $57.49
こんな商品も購入されています...
AE Modular 2-Row 20x2 Wide Walnut Wood Case (eurorack module case)
Cat: 809653 Rel: 24 May 21
20x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
out of stock $81.74
こんな商品も購入されています...
AE Modular 8U Eurorack Adapter Frame (Eurorack adapter frame)
Cat: 719727 Rel: 03 Sep 19
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.
The product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
… Read moreThe product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
out of stock $25.93
こんな商品も購入されています...
Cat: 818394 Rel: 06 Jul 21
Green custom-made knobs for AE Modular
Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.
They are available in four different colors: red, blue, green and yellow.
… Read moreThey are available in four different colors: red, blue, green and yellow.
out of stock $5.07
こんな商品も購入されています...
Cat: 818422 Rel: 05 Jul 21
Mini jack stereo to jack stereo adapter cable for mono & stereo use
Notes: AE modular offers mostly minijack sockets for input/output; but external gear like mixers mostly use 1/4 jacks. In this case, this adapter cable can be helpful. The adapter is approx. 30cm long and can be used for mono and stereo use.
E.g. for connecting external FX devices to the MIXCONSOLE module (FX send)
… Read moreE.g. for connecting external FX devices to the MIXCONSOLE module (FX send)
out of stock $6.76
こんな商品も購入されています...
AE Modular Power Extender Cable (power extender cable)
Cat: 719718 Rel: 02 Sep 19
Extender cable for AE modular
Notes: This extender cable is useful if you use the power splitter cable; the length of 1m allows it to arrange your devices as you like and still have them powered by one single power supply.
Length: 1m
Plugs: 5.5 x 2.1 mm female / 5.5 x 2.1 mm male
… Read moreLength: 1m
Plugs: 5.5 x 2.1 mm female / 5.5 x 2.1 mm male
out of stock $3.38
こんな商品も購入されています...
AE Modular Red Knobs For AE Modular (pack of 10) (AE Modular Knobs)
Cat: 818257 Rel: 06 Jul 21
Red custom-made knobs for AE Modular
Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.
They are available in four different colors: red, blue, green and yellow.
… Read moreThey are available in four different colors: red, blue, green and yellow.
out of stock $3.67
こんな商品も購入されています...
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.
PLEASE NOTE: This type 1 is for the STANDARD racks (1-row or 2-row), for a 2-row rack you need also two of this cables.
… Read morePLEASE NOTE: This type 1 is for the STANDARD racks (1-row or 2-row), for a 2-row rack you need also two of this cables.
out of stock $21.14
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 12x1 Narrow Bamboo Wood Case (eurorack module case)
Cat: 809674 Rel: 24 May 21
12x1 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
out of stock $41.71
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 12x1 Narrow Bamboo Wood Case (eurorack module case)
Cat: 809674
12x1 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
out of stock $0.00
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 12x1 Narrow Synth Module Case (modular synthesiser case)
Cat: 786529 Rel: 19 Oct 20
1-row 12x1 synth module case
Notes: This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
out of stock $39.18
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 12x1 Narrow Synth Module Case (B-STOCK) (synth module case)
Cat: 992327 Rel: 01 Jan 90
B-STOCK: Without original box, product has light surface marks but otherwise in perfect working condition.
Notes: ***B-STOCK: Without original box, product has light surface marks but otherwise in perfect working condition.***
This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
… Read moreThis 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
out of stock $31.56
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 12x1 Narrow Walnut Wood Case (eurorack module case)
Cat: 809676 Rel: 24 May 21
12x1 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
connect the case to your system via the Racklink Module (works for all cases)
install the Master Module
install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
connect the case to your system via the Racklink Module (works for all cases)
install the Master Module
install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
out of stock $44.53
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 16x1 Standard Bamboo Wood Case (eurorack module case)
Cat: 809667 Rel: 24 May 21
16x1 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
connect the case to your system via the Racklink Module (works for all cases)
install the Master Module
install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
connect the case to your system via the Racklink Module (works for all cases)
install the Master Module
install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
out of stock $51.85
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 16x1 Standard Case (synth module case)
Cat: 786523 Rel: 21 Aug 20
16x1 rack case for Tangible Waves AE modular
Notes: The 1-row rack for AE modular is 16 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)
out of stock $44.53
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 16x1 Standard Walnut Wood Case (eurorack module case)
Cat: 809669 Rel: 24 May 21
16x1 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
out of stock $52.14
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 20x1 Wide Bamboo Wood Case (eurorack module case)
Cat: 809672 Rel: 24 May 21
20x1 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
out of stock $52.42
こんな商品も購入されています...
Tangible Waves AE Modular 1-Row 20x1 Wide Walnut Wood Case (eurorack module case)
Cat: 809671 Rel: 06 Jul 21
20x1 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module
Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.
1 in stock $45.09
Click for better price!
or call +44 20 7424 1960
quote 809671
quote 809671
こんな商品も購入されています...
Cat: 719704 Rel: 02 Sep 19
Pack of 6 patch wires
Notes: A set of 6 yellow patchwires for AE modular; with a length of 10cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
… Read more 1 in stock $6.20
こんな商品も購入されています...
Tangible Waves AE Modular 16U Eurorack Adapter Frame (Eurorack adapter frame)
Cat: 719731 Rel: 12 Sep 19
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.
The product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
… Read moreThe product includes:
- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
out of stock $36.92
こんな商品も購入されています...
Tangible Waves AE Modular 17cm Patchwires (blue, pack of 6) (patch cables)
Cat: 719721 Rel: 02 Sep 19
Pack of 6 patch wires
Notes: A set of 6 blue patchwires for AE modular; with a length of 17cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
… Read moreout of stock $7.62
こんな商品も購入されています...
Tangible Waves AE Modular 2-Row 12x2 Narrow Bamboo Wood Case (eurorack case)
Cat: 809665 Rel: 24 May 21
12x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
out of stock $61.44
こんな商品も購入されています...
Tangible Waves AE Modular 2-Row 12x2 Narrow Walnut Wood Case (eurorack module case)
Cat: 809664 Rel: 24 May 21
12x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
out of stock $55.23
こんな商品も購入されています...
Tangible Waves AE Modular 2-Row 16x2 Standard Modular Synthesiser Case (black/red) (synth module case)
Cat: 786514 Rel: 19 Oct 20
2-row 16x2 wide case
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.
Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
… Read moreVia a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.
Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
out of stock $60.04
こんな商品も購入されています...
Tangible Waves AE Modular 2-Row 16x2 Standard Walnut Wood Eurorack Synth Module Case (eurorack case)
Cat: 807735 Rel: 24 May 21
16x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
out of stock $66.50
こんな商品も購入されています...
Cat: 719705 Rel: 02 Sep 19
Pack of 6 patch wires
Notes: A set of 6 grey patchwires for AE modular; with a length of 25cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
… Read moreout of stock $8.17
こんな商品も購入されています...
Tangible Waves AE Modular 2U Blank Module (blank module)
Cat: 719725 Rel: 02 Sep 19
Blank module for AE modular - 2U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
… Read moreout of stock $3.95
こんな商品も購入されています...
Cat: 719706 Rel: 02 Sep 19
Pack of 6 patch wires
Notes: A set of 6 red patchwires for AE modular; with a length of 40cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
… Read more 4 in stock $8.46
こんな商品も購入されています...
Tangible Waves AE Modular 4U Blank Module (blank module)
Cat: 719726 Rel: 02 Sep 19
Blank module for AE modular - 4U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
… Read moreout of stock $5.07
こんな商品も購入されています...
Tangible Waves AE Modular 6 x Patch Cables (green, 55cm) (patch wires)
Cat: 719707 Rel: 02 Sep 19
Pack of 6 patch wires
Notes: A set of 6 green patchwires for AE modular; with a length of 55cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
… Read moreout of stock $9.02
こんな商品も購入されています...
Cat: 807732 Rel: 05 Feb 21
Set of 6 80cm purple patch cables
Notes: A set of 6 Patchwires for AE modular; with a length of 80 cm.
Cable has a soft, flexible silicone insulation, with a gold plated pin.
… Read moreCable has a soft, flexible silicone insulation, with a gold plated pin.
out of stock $11.00
こんな商品も購入されています...
Tangible Waves AE Modular 9V Power Supply Adapter (1.3A) (power supply adapter)
Cat: 719715 Rel: 03 Sep 19
Power supply for AE modular
Notes: This power supply adapter is suitable for AE modular and other devices. The maximum current of 1.3A is enough to feed several AE modular racks in parallel.
… Read moreout of stock $18.03
こんな商品も購入されています...
Cat: 818268 Rel: 06 Jul 21
Blue custom-made knobs for AE Modular
Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.
They are available in four different colors: red, blue, green and yellow.
… Read moreThey are available in four different colors: red, blue, green and yellow.
out of stock $3.67
こんな商品も購入されています...
Tangible Waves AE Modular Case Hinge Kit Type 2 (case hinge kit)
Cat: 786533 Rel: 19 Oct 20
Case hinge kit for Tangible Waves AE Modular
Notes: The case hinge kit allows it to join two cases at a free angle. It contains:
two joint elements
four screws
a connection cable between the cases.
This type is designed for an application where the lower case is already fixed above the surface (e.g. when mounting a third case to a combination of two cases connected with the hinge kit type 1).
Via the connection cable the bus and power supply is shared between both cases, so no extra power supply / second MASTER module is needed for the additional case.
… Read moretwo joint elements
four screws
a connection cable between the cases.
This type is designed for an application where the lower case is already fixed above the surface (e.g. when mounting a third case to a combination of two cases connected with the hinge kit type 1).
Via the connection cable the bus and power supply is shared between both cases, so no extra power supply / second MASTER module is needed for the additional case.
out of stock $22.54
こんな商品も購入されています...
Tangible Waves AE Modular DC Power Switch For Synth Module Cases (DC power switch)
Cat: 967535 Rel: 20 Feb 24
DC power switch for AE Modular cases.
Notes: Want to have a power switch for your AE modular? Here it is; a simple and straightforward cable with integrated switch.
… Read moreout of stock $4.23
こんな商品も購入されています...
Tangible Waves AE Modular Knob Remover Tool (knob remover tool)
Cat: 967531 Rel: 21 Feb 24
Knob remover tool.
Notes: Due to the materials and structures of the potentiometers and knobs, the AE knobs are sometimes hard to remove by hand. We created this tool which "grips" the knob from below and has a convenient handle to pull it up.
The synth module is not included, it is shown for demonstration purposes only.
… Read moreThe synth module is not included, it is shown for demonstration purposes only.
out of stock $8.46
こんな商品も購入されています...
Tangible Waves AE Modular Knobs For AE Modules (pack of 10) (eurorack knobs)
Cat: 807733 Rel: 05 Feb 21
Pack of 10 knobs for Tangible Waves AE Modules
Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.
As of December 2020, all AE modules will be shipped with these knobs as standard.
… Read moreAs of December 2020, all AE modules will be shipped with these knobs as standard.
out of stock $3.37
こんな商品も購入されています...
Tangible Waves AE Modular Knobs For AE Modules (pack of 50) (eurorack knobs)
Cat: 807734 Rel: 05 Feb 21
Pack of 50 knobs for Tangible Waves AE Modules
Notes: These knobs are custom made for AE modular; they fit perfectly on the shafts and can be added to all AE modules, no matter of which generation they are.
As of December 2020, all AE modules will be shipped with these knobs as standard.
… Read moreAs of December 2020, all AE modules will be shipped with these knobs as standard.
out of stock $14.93
こんな商品も購入されています...
Tangible Waves AE Modular MIDI Breakout Cable (MIDI breakout cable)
Cat: 719720 Rel: 12 Sep 19
MIDI breakout cable for AE modular
Notes: The MIDI Breakout Cable is an adapter from the "classic" DIN-5 MIDI Socket to a stereo 3.5mm minijack plug, which is used as MIDI in on AE modular.
… Read moreout of stock $7.89
こんな商品も購入されています...
Tangible Waves AE Modular Mini Jack Stereo To Dual 1/4" Jack Mono Y Adapter Cable (30cm) (Y adapter cable)
Cat: 818416 Rel: 05 Jul 21
Mini jack stereo to dual 1/4" adapter cable for stereo use
Notes: AE modular offers mostly minijack sockets for input/output; but external gear like mixers mostly use 1/4 jacks. In this case, this adapter cable can be helpful. The adapter is approx. 30cm long and splits two signal paths at the minijack side to two mono 1/4 jack sockets.
Application is e.g. connecting the return of external stereo FX devices to the FX return of the MULTIFX module.
… Read moreApplication is e.g. connecting the return of external stereo FX devices to the FX return of the MULTIFX module.
out of stock $8.46
こんな商品も購入されています...
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.
PLEASE NOTE: This type 1 is for the NARROW racks (1-row or 2-row), for a 2-row rack you need two of this cable.
… Read morePLEASE NOTE: This type 1 is for the NARROW racks (1-row or 2-row), for a 2-row rack you need two of this cable.
1 in stock $19.16
こんな商品も購入されています...
Tangible Waves AE Modular Power Splitter Cable (power splitter cable)
Cat: 719717 Rel: 02 Sep 19
Power splitter cable for AE modular
Notes: The Power Splitter Cable allows it to power up to four devices with one Power supply adapter. The PSU you find here has enough capacity to run up to four AE modular racks (or other devices with 9V supply voltage). Please make sure the total current consumption is below 1.3 amperes!
Recommended if you use extender cables, as the four cables of this splitter are only 20cm in length each.
… Read moreRecommended if you use extender cables, as the four cables of this splitter are only 20cm in length each.
out of stock $4.79
こんな商品も購入されています...
Tangible Waves AE Modular QUICKSWAP 12U 1-Row Enclosure Case (modular synthesiser enclosure case)
Cat: 1010907 Rel: 13 Nov 24
12U 1-row AE module enclosure case
Notes: The 1-row QUICKSWAP CASE for AE modular is the high-end case for AE modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - the key feature of this case - allows to plug in AE modules without any screws! The design makes sure that the modules sit really firm in the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. This means, rearranging your modular system can't be easier!
This case is developed by Kyaa, a great 3rd party AE module developer; tangible waves is producing the case. We are happy about this great cooperation and this marvellous addition to our product range!
With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases also via the connector.
Other utilities, like a handle for carrying a folded case, are coming soon.
Please note: This rack does not include the Master or Power module.
To connect the case to power you have the following options:
install the Master Module
install the Power Module
connect to another, already powered QUICKSWAP CASE
connect to another AE case via the RACKLINK module kit
… Read moreThis case is developed by Kyaa, a great 3rd party AE module developer; tangible waves is producing the case. We are happy about this great cooperation and this marvellous addition to our product range!
With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases also via the connector.
Other utilities, like a handle for carrying a folded case, are coming soon.
Please note: This rack does not include the Master or Power module.
To connect the case to power you have the following options:
install the Master Module
install the Power Module
connect to another, already powered QUICKSWAP CASE
connect to another AE case via the RACKLINK module kit
2 in stock $130.76
Click for better price!
or call +44 20 7424 1960
quote 1010907
quote 1010907
