安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Today: Studio Equipment

View:
Options
113/13(ページ1/1)の商品
Thursday 18 April 2019
Cat: 708102 Rel: 18 Apr 19 • View all Synth modules
 
14 band inductor based fixed filter bank - silver, 30HP
Notes: This 30HP wide module features twelve fixed frequency, inductor based bandpass filters, set at half octave interval spacing and covering from 125 Hz through to 5.8kHz. It also features low pass and high pass shelf filters, again they are fixed frequency and both are active inductor based circuits. It has a vintage pedigree that harks back to the original and highly sought after 914 Fixed Filter bank from the 1960's Moog 900 series modular synthesiser system, however we have brought this design up to date and made it compact enough to fit into skiff friendly Eurorack cases by using gyrator based active inductors, and have added some other very useful features too - the bands are split alternatively to left and right channels, each having their own individual output, and there is also an inbuilt Voltage Controlled cross-fader that allows panning between the left and right banks, with a mix of all bands available in the central position.

In addition, we have a second cross fader that can mix between the dry incoming signal, or an external signal fed into input 2, and this is cross-faded against the wet MIX Output - this allows Voltage Controlled crossfading from wet to dry signals, or between wet and external signals - and the level of each can be adjusted using the Input 1 and Input 2 level controls.

A further addition is the feedback control, this is similar in design to the resonance control on a regular VCF, but because of the multiple fixed filters topology it is rather different in operation - it would normally be added in small amounts to thicken up the sound, however we have allowed the feedback to traverse to quite extreme settings for howling feedback and even soft clipped self-oscillation, especially for the noise merchants out there...

Using L/C inductor topology bandpass circuits rather than the usual Sallen Key R/C active bandpass filters does give a slightly different sound and this is part of the magic of the original 914 filterbank, as the LC based circuit exhibits less phase shift against frequency that the more common Sallen Key R/C based bandpass filters that are used in many Modular synths.

Many people often wrongly assume that a fixed filter bank is exactly the same as a graphic equaliser - however this is certainly not the case, if all of the controls of a graphic EQ are set to centre then a flat frequency response is expected and the output will sound very similar, or identical to the input - this does not happen with a fixed filter bank, the frequency response rises and falls as it passes between each stage (but to a lesser extent than if the filters are all set to maximum output), so it acts as a soft slope comb filter, and the resulting output sounds very different from the input signal. Also, with all of the individual filters turned to zero there will be no output at all.
Read more
 1 in stock $503.55
Click for better price!
quote 708102
Cat: 718794 Rel: 18 Apr 19 • View all Synth modules
 
Distortion module with Plasma technology - 16HP
Notes: Gamechanger Audio is a Latvian company committed to exploring the uncharted territories of music electronics and creating devices that provide real value while stretching the imagination of both musicians and engineers. In their Plasma Pedal they managed to combine Tesla coil with a lots of Rock and Roll and the result is one of the worlds heaviest sounds with plenty of unique features and the potential to become the new standard of distortion.

Similar to the Plasma Pedal, Plasma Drive gives you a new and previously unexplored method of achieving signal clipping in 16HP. Instead of using LED circuits, transistors or vacuum tubes to produce overdrive, the Plasma Drive boosts audio signal to 3000V and transforms it into a series of continuous high-voltage discharges in a xenon-filled tube. In essence - you are playing a lightning bolt of electricity, and the electrical discharges produced by your instrument are instantly converted back into an analogue audio signal, producing a quick, responsive, and extremely heavy distortion with tons of unique character!

The Eurorack module Plasma Drive brings sounds of the Plasma Pedal to the next level. As per Eurorack standards we added CV control over distortion level and dry/wet mix, as well as octave up and 1 and 2 octaves down tracking oscillators that add even more harmonics to the original signal. Tracking oscillators can be switched on/off manually or via trigger signals. The Plasma Drive module is powered via conventional Eurorack PSU ribbon cable and the power consumption is around 150mA.
Read more
 3 in stock $330.28
Cat: 690936 Rel: 18 Apr 19 • View all Synth modules
 
Dual-channel drum sample module - 14HP
Notes: Performance oriented Sample Drum brings you two independent drum sounds or loops with plenty of manual and CV controlled parameters. Samples are stored on the microSD card, and OLED screen makes working with samples instant and easy.

Sample Drum allows you to slice up loops directly in your modular system and rearrange them to taste. For processing, there are tuning functions (including 1 v/octave pitch tracking) and virtual VCAs plus AD envelopes. Thanks to the module's dual-channel concept, two loops can be combined. It is also possible to load one-shot samples instead of entire rhythms, of course. A total of six CV inputs guarantees lively results.

Sample Drum is composed of two identical audio players. WAV files (including cue points) are fed to the module via a micro SD card. Loops can be cut into several sections using the Data, Start and End potentiometers. The resulting slices may be played back in any order imaginable. A tune control allows real-time pitch changes. Additionally, there is a virtual VCA plus AD envelope per slice. - But that's not all! There are three CV inputs per channel, which can be routed to any parameters. It is even possible to play sounds according to the 1 v / octave standard. Results are emitted via one output per player.
Read more
 1 in stock $320.53
Cat: 708085 Rel: 18 Apr 19 • View all Synth modules
 
12 stage multi tap stereo phaser - silver, 18HP
Notes: The next generation 12 stage, analogue multi tap Phaser, which is a development of, and replacement for, our earlier MegaPhase 12 unit. It includes all the features of the MegaPhase 12 and is also built around the circuitry of the superb sounding EH Smallstone Phaser, which was used to such great effect on synthesisers and string machines by J M Jarre on his early albums. It has the same versatile Stage and Emphasis stage switching, and the same configuration of stereo outputs, where the left channel is taken from the Stage switch, and the Right output from the Emphasis Stage Switch.

New features include independent Level Controls for Input 1 and Input 2, and a Phase "Colour" Control, which can lighten or darken the phasing effect. We have also used much lower noise internal VCA's and low noise audio op-amps along with a four layer PCB design, so that the S/N ratio is improved and the noise floor is considerably reduced compared with the previous MegaPhase 12 phaser. Like its predecessor it occupies 18HP of Eurorack space.
Read more
 1 in stock $373.60
Click for better price!
quote 708085
Cat: 708090 Rel: 18 Apr 19 • View all Synth modules
 
Sample & Hold, Track & Hold, Gated Slew, Clock & Noise generator - silver, 12HP
Notes: A real powerhouse module that takes up only 12 HP of rack space. It can generate random and pseudo random control voltages, staircase waveforms, deliberate aliasing of audio signals, portamento type effects, adjustable audio range noise and has many other uses too.

It can be switched between Sample & Hold or Track & Hold modes, and the unique "Restrict" control affects the way the hold output changes with respect to the current input level and previously held output level. With the control fully off the unit behaves just like any other S/H, but at fully clockwise the output is restricted to move by only a small amount after each new sample. The output will still have the same range as the input, but will need more hold commands to get there. This versatile Sample and Hold circuit was designed by Tony Allgood, and is built under licence from Oakley Sound.

The Sample Hold & Slew module also includes a very well featured Slew generator, which includes a Gated Slew function. It can be used independently or chained with the S&H module. Slew mode can be switched between Linear or Exponential Slew types. There is a Gate input, so that the Slew on/off can be switched using an External CV (Gated Slew), and also the Slew control logic can be reversed by a toggle switch that doubles as a manual Slew on/off switch. In addition, it has slew up only, slew down only or slew up and down modes, which are selected with a three-way toggle switch. An indicator LED lights when Slew is active

There is also an inbuilt analogue Noise generator, which is normalised to the input of the Sample and Hold section, and there are both regular and clipped Noise outputs - the Clipped Noise is particularly useful with the sample and hold section, as it is weighted to produce higher random voltages. Both Noise outputs are fed through an internal "Noise Colour" control - at centre position it allows the noise through unfiltered, turning the control anti-clockwise introduces low pass filtering of the Noise, and rotating it clockwise introduces high pass filtering. The Noise source itself is based on an analogue band gap shunt regulator configured in avalanche mode, and it generates white noise with a gradual roll off above 8kHz. It is a little "grainier" in character than the noise from our MiniMod Glide & Noise module (which uses a reverse biased transistor as a noise source), so is a useful compliment to this module as it does not generate exactly the same sounding Noise

Lastly, it includes a wide range clock generator with a rate LED. The range is from one cycle every thirty seconds to around 2 kHz and the clock output is normalised to the Clock Input of the S&H section. It also has a Clock Out jack so that it can be externally patched to other Eurorack modules.
Read more
 1 in stock $211.16
Click for better price!
quote 708090
Monday 15 April 2019
Cat: 725495 Rel: 15 Apr 19 • View all Synth module accessories
 
Official 1HP 4ms blank panel
Notes: Make Noise blank panel - 1HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $4.60
Cat: 725496 Rel: 15 Apr 19 • View all Synth module accessories
 
Official 2HP 4ms blank panel
Notes: Make Noise blank panel - 2HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $4.60
Cat: 725497 Rel: 15 Apr 19 • View all Synth module accessories
 
Official 4HP 4ms blank panel
Notes: Make Noise blank panel - 4HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $5.69
Cat: 725498 Rel: 15 Apr 19 • View all Synth module accessories
 
Official 6HP 4ms blank panel
Notes: Make Noise blank panel - 6HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $5.69
Cat: 725499 Rel: 15 Apr 19 • View all Synth module accessories
 
Official 8HP 4ms blank panel
Notes: Make Noise blank panel - 8HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $7.85
Cat: 725500 Rel: 15 Apr 19 • View all Synth module accessories
 
Official 10HP 4ms blank panel
Notes: Make Noise blank panel - 10HP width. Black coloured PCB material with Make Noise logo.
Read more
 2 in stock $8.65
Cat: 725492 Rel: 15 Apr 19 • View all Synth module accessories
 
Jumper cable for daisy chaining 4ms Listen modules and/or 4ms WAV recorder
Notes: The Audio Jumper 3-pin cable can be used to connect two Listen 4, Listen 4 Quarters and/or Listen IO modules to form a larger mixer. It's also possible to connect a WAV recorder with a Listen module for direct recording.
Read more
 2 in stock $2.44
Cat: 725794 Rel: 15 Apr 19 • View all Synth modules
 
10HP Eurorack CV modulator module
Notes: MISO is a multipurpose utility module, a laboratory for synthesizing control voltage signals and audio. MISO combines multiple CV tools into one module for making complex CV shapes at the output stage. The name comes from the four main functions available: Mix, Invert, Scale, and Offset.

MISO's 2 sections (1/2 IN and A/B IN) are identical. Each section has two inputs that can be used to Mix signals, Invert polarity/shape, Scale magnitude and Offset voltage. Each function can be used independently or simultaneously with the total shape summed to the mix output.

At the centre of the module is another processor, an accurate smooth linear voltage-controlled crossfader that mixes equally between the outputs of the top and the bottom MISO sections. Feed the MISOs with envelopes, LFOs, Sequences to create new shapes and then crossfade them manually or with CV using the centre section for even further complexity of shapes and animation of control signals. Crossfade between the waveforms of a VCO or audio samples with CV for more motion.

There are an endless number of ways to patch MISO with unexpected and inspiring results. MISO is the kind of module that gives modular synthesizers its incredible replay value, rewarding hours of creative explorations and its experimental and non-traditional mixing.

MISO offers a lot in a small comfortable module that matches Tiptop's system look with clean white faceplate styling. A red/yellow indicator light next to each section makes it easy to see signals and visualize polarity.
Read more
 2 in stock $85.54
113/13(ページ1/1)の商品

Filter

Today: Studio Equipment
Close