安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back In Stock: Studio Equipment

View:
Options
150/50(ページ1/1)の商品
Cat: 740064 Rel: 09 Aug 19
 
Dual oscillator Eurorack module with patented wave-slicing design - 26HP
Notes: The Waverazor Dual Oscillator is a result of a special collaboration between 1010music and MOK. It is the first hardware module to bring MOK's patented wave-slicing? oscillator design to Eurorack format. Waverazor's novel approach to synthesis splices waveforms into twisted and aggressive new timbres. Featuring fresh sound generation techniques like Multi-Sync and Mutant AM, the Waverazor oscillator is perfect for biting leads, glitched-out basses, cinematic drones and everything in between.

One Waverazor Eurorack oscillator can contain up to 8 wave slices, creating a multi-segment "Frankenstein" waveform that produces extended harmonic content beyond any single wave shape. Each individual slice has independent control over wave pitch, volume, phase and DC offset, allowing a single oscillator to contain a multitude of timbral colours. Even the "Razor" itself can be adjusted, with parameters for its own slice frequency, step size multiplier and duty cycle.

The Waverazor Dual Oscillator module provides a central waveform display that allows you to visualize the output. There's an audio input for slicing up any sound you like. Four endless knobs make it possible to morph multiple parameters at once, while the touch screen enables X/Y performance controllers that allow you to manipulate the sound with the swipe of your finger. Top it all off with 20 modulation CV inputs for complete sonic insanity!

What is included:

- Waverazor Dual Oscillator Eurorack module
- MicroSD card with Waverazor firmware and patch data loaded on it
- Eurorack power cable
- Waverazor Dual Oscillator Quick Start guide
- MIDI Adapter
Read more
 2 in stock $539.93
2hp
Cat: 686014 Rel: 04 May 18
 
Clock divider/multiplier module
Notes: Div is a 2 channel, voltage controlled clock divider and multiplier. Incoming clock signals can be multiplied or divided by a factor of 16 with a multitude of values in between.

CV inputs provide external control of the current clock rate, allowing for the creation of dynamic rhythms from a single clock signal.
Read more
 2 in stock $96.93
Click for better price!
quote 686014
Cat: 711004 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
 2 in stock $76.61
Cat: 527769 Rel: 14 Apr 14
 
4U Rackmount kit for Access Virus TI2 desktop synthesiser
Notes: This is a 4U rackmount kit for Access' Virus TI2 Desktop synth.

Please note this product DOES NOT fit the original Virus TI.
Read more
 1 in stock $33.88
Cat: 647624 Rel: 28 Apr 17
 
Multicore cable 8 x XLR female to 8 x 6.3 mm Jack stereo - 3m
Notes: Eight-pair studio loom or subcore for stages with moderate stresses, featuring eight Adam Hall female XLR plugs and eight 6.3 millimetre stereo TRS plugs. Individually numbered with printed numbers on the sleeve and additional, coloured markings on the TRS plugs.
Read more
 1 in stock $26.32
Cat: 647623 Rel: 28 Apr 17
 
Multicore cable 8 x XLR male to 8 x 6.3 mm Jack stereo - 3m
Notes: Eight-pair studio loom or subcore for stages with moderate stresses, featuring eight Adam Hall male XLR plugs and eight 6.3 millimetre stereo TRS plugs. Individually numbered with printed numbers on the sleeve and additional, coloured markings on the TRS plugs.
Read more
 4 in stock $22.41
Cat: 647628 Rel: 28 Apr 17
 
Multicore cable 8 x XLR male to 8 x XLR female - 3m
Notes: Eight-pair studio loom or subcore for stages with moderate stresses, featuring eight Adam Hall XLR plugs on each end. Individually numbered with printed numbers on the sleeve.
Read more
 1 in stock $29.85
Cat: 669279 Rel: 09 Nov 17
 
Universal speaker stand
Notes: Universal speaker stand for loudspeakers till 35 kg, black powder coated.

Triangular foot, 35 mm square section tube, Tube 40/35 mm, T-screw for locking.

For heavy speakers you can lock the height on 102 - 114 - 126 - 138 - 150 with the included safety pin.

Utility space for speakers: 230 x 230 mm, steel material thickness 2 mm, slip resistant surface. Plastic cable clip on upper tube for adequate and discreet cable guiding.

The foot can be equipped with 3 adjustable plastic feet or steel-spikes. Without the plate you can use the speaker stand with a standard speaker stand receptacle (35mm).

The product is delivered dismantled, with screws and hexagon socket screw key, 3 plastic feet and 3 steel spikes with lock nut.
Read more
 5 in stock $35.87
Cat: 519858 Rel: 06 Mar 14
 
Keyboard sustain pedal with 1/4" jack connector
Notes: The Alesis ASP-1 is a universal sustain pedal with a polarity switch that expands the expressive control of any electronic keyboard.

This low-profile, momentary pedal is built to perform and comes in a compact, simple design that's suited for the stage or studio. The fast-acting sustain mechanism provides an immediate response, and the ASP-1 comes ready with an attached 1/4" plug for out-of-the-box use. A non-slip bottom secures the pedal in place.
Read more
 1 in stock $17.19
Cat: 648932 Rel: 25 May 17
 
Expander module for Pamela's New Workout - 2HP
Notes: Pexp-2 is an expander module for Pamela's NEW Workout offering additional dedicated fixed clocked outputs.

Extend Pam as a master to clock external gear with a super solid MIDI & Din Sync dedicated clock outputs.

Use extra fixed jack clocked gate outputs to free up Pamela outputs for more exotic modulation duties.

Connects to, and powered by, expander header on rear of Pamela's NEW Workout. Only a single expander is supported at any time.
Read more
 1 in stock $77.12
Click for better price!
quote 648932
Cat: 686574 Rel: 29 Jun 18
 
Professional-grade 49 key semi-weighted MIDI keyboard & controller, with Analog Lab 2 Software
Notes: ***Limited 'Art Of Keys' Promo! Simply register your KeyLab Essential on the Arturia website. As soon as you've done this you will see MINI V and STAGE-73 V software in your account, available for download. Install it, and get set to create musical magic. Offer ends 30th September 2019***

With everything you need to express your musical ideas, take command of your studio, and perform like you've always dreamed, KeyLab Essential is an intuitive, powerful, carefully crafted controller keyboard that's easy to master.

Music is at the heart of this controller. Every aspect of KeyLab Essential has been carefully chosen to give you the best possible experience when creating and performing. From the responsive keyboard to the intelligently assigned knobs and faders, you'll feel like everything you touch turns to gold. KeyLab Essential makes navigating your track a breeze thanks to the dedicated DAW Command Center, and makes browsing your presets an exciting, inspiring experience.

It's easy to let your concentration drift and your inspiration slip when you spend hours on tedious tasks. KeyLab Essential is the result of careful research, with the aim of streamlining your creative process, giving you more time to express yourself through music. With the KeyLab Essential on your desk and its comprehensive set of music software loaded in your computer, the only required step to start experimenting, composing and recording is sitting in front of them.

Once you've experienced the creative workflow of KeyLab Essential, you'll wonder how you ever made music without it.

Geared for maximum compatibility, KeyLab Essential gives you unadulterated control of your digital world, seamlessly integrating with virtual instruments and DAW software.

KeyLab Essential is packed with clever controls that help you make swift work of everyday tasks within your recording software. Play your track, jog forwards and back, save, toggle your metronome and loop, record, and punch in on the fly. This functionality keeps your hands on the controller and your mind in the music. As well as offering ultimate integration with Analog Lab 2, KeyLab Essential is a universal MIDI controller, compatible with any third-party instruments or software. KeyLab Essential also comes with Ableton Live Lite so you can start recording, editing, and releasing your music with one of the most popular music platforms on the planet.

Whether you're a total newcomer to the world of recording, or a seasoned pro who's set in their ways, KeyLab Essential has the potential to revolutionize your creative process.

A complete keyboard production studio, KeyLab Essential comes with some incredible software titles. Whether you want a searing-hot synth lead or an ethereal string pad, a vintage upright piano or a complex, animated soundscape, KeyLab Essential gives you everything you need to perform and record. All the ingredients of the cocktail are there and ready to be mixed according to your own style.
Read more
 1 in stock $174.07
Cat: 729417 Rel: 11 Jan 17
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Protect your electronic equipment with this 19" rack mountable power conditioner featuring an RFI/EMI filter. The filter works by preventing noise from florescent lights, certain dimmers and similar sources of electronic pollution contaminating the AC line and leaking into sensitive audio, video or computer circuits. In addition; the front panel features two LED lamps with dimmer control for illuminating your rack.
Read more
 1 in stock $48.43
Cat: 626323 Rel: 07 Oct 16
 
Compact chorus pedal with variable parameters for a range of modulation effects
Notes: The Bass Clone chorus pedal's core circuitry is nearly identical to the legendary Small Clone chorus, but with added features especially for bass. Chorus is a combination of modulated and dry signals. The Bass Clone's Crossover switch cuts low end from the modulated signal so the pedal delivers a more accurately articulated bottom end with excellent note definition. The Treble control affects the whole signal while the Bass control only affects the dry half. Together with the Crossover switch they provide precise sound shaping that lets you achieve a tight, focused bass guitar sound with a well-defined low end and shimmering chorus on top.

Chorus is a combination of modulated and dry signals. The Bass Clone's Crossover switch cuts low end from the modulated signal so the pedal delivers a more accurately articulated bottom end with excellent note definition. The Bass Clone's Treble control affects the whole signal while the Bass control only affects the dry half. Together with the Crossover switch, they provide precise sound shaping that lets the player achieve a tight, focused bass guitar sound with a well-defined low end and shimmering chorus on top.

The Bass Clone features a compact footprint plus true bypass switching for maximum signal path integrity when in bypass mode. It runs on a 9V battery or an optional EHX 9.6DC/200mA AC adapter.
Read more
 1 in stock $69.84
Click for better price!
quote 626323
Cat: 560473 Rel: 04 Feb 15
 
Distortion/sustainer effects pedal with true bypass for maximum signal path integrity
Notes: The NYC original. Hendrix and Santana were among the first to get a piece of the Pi, and for over 40 years the Big Muff Pi has been defining the sound of rock guitar.

Revered by contemporary guitarists and rock legends for its rich, creamy, violin-like sustain, from Pink Floyd to The White Stripes, everyone still wants a piece of the Pi!
Read more
 1 in stock $87.56
Click for better price!
quote 560473
Cat: 719370 Rel: 18 Feb 19
 
Guitar synthesiser effects pedal with 11 monophonic synth sounds
Notes: The EHX Mono Synth transforms your guitar into eleven great sounding synthesizers... from vintage synth emulations to fat, stacked voices to soaring lead sounds and more.

The Mono Synth was designed to work on guitar without any modifications, special pickups or MIDI implementation. Its intuitive layout makes it easy to use and easy to dial in cool sounds quickly. The pedal's DRY dial adjusts the dry guitar volume at the Synth Output while SYNTH controls the volume of the synthesizer sound at the Synth Output. Used together they let you create just the right mix. The SENS control, short for sensitivity, adjusts how playing dynamics trigger the synthesizer and allows you to fine-tune the pedal's response to your guitar and playing style.

With the CTRL knob you can adjust a key parameter for each of the eleven synth types. It varies depending on the preset and provides extra tweakability for customizing your sound. There's also an EXP input which lets you control an entirely different parameter in real-time with an expression pedal!

Using the built-in Preset footswitch, a user customizable preset for each of the eleven synth sounds can be created, saved and recalled. The factory presets are also easy to restore should you wish to.

From string-like synths, to aggressive resonant sounds and deep drones and bell-like tones, the Mono Synth puts a collection of hot synthesizers at your fingertips.
Read more
 2 in stock $121.95
Click for better price!
quote 719370
Cat: 560344 Rel: 31 Jan 15
 
Analog chorus effects pedal with true bypass for maximum signal path integrity
Notes: The heritage of classic Electro-Harmonix Small Clone chorus comes full circle in an economy version.

Chorusing is an effect that bends the frequency of the input signal and blends it with the original sound, creating a shimmering doubling effect.
Read more
 1 in stock $47.95
Click for better price!
quote 560344
Cat: 560316 Rel: 02 Feb 15
 
Lightweight, durable polymer effects pedal cradle, for "Next Step" range
Notes: We've created a convenient, secure way to mount any of the Next Step Effects pedals to a pedalboard. The new Pedalboard Cradle is custom-designed of a lightweight, durable polymer. Measuring 8.875 x 4.375 x 0.625 inches, it adheres to a pedalboard with hook and loop fastener and the pedal rocks freely and securely within the cradle. When the musician is ready to pack up their pedalboard, a security strap locks down the Next Step Effect for transport.

The Electro-Harmonix line of Next Step Effects consists of the Crying Bass, Crying Tone Wah, Expression Pedal, Pan Pedal, Slammi, Talking Pedal and Volume Pedal.
Read more
 2 in stock $16.68
Cat: 581756 Rel: 14 Sep 15
 
Noise gate/effects loop pedal with 3 controls for precise fine-tuning & buffered bypass
Notes: A sophisticated noise gate that can tame a single pedal or an entire effects loop! The Silencer's three-control layout provides precise fine-tuning to fit your system, axe and playing style. Threshold adjusts how much level is required to open the noise gate and allow a signal to pass thru. Reduction regulated the degree to which the gated signal is reduced and is variable between -70dB and +4dB. Release controls how long the gate remains open after the signal drops below the Threshold. Release time is variable between 8ms and 4 seconds.

I/O includes 1/4" Input, Output, Send and Return jacks. The footswitch selects whether The Silencer is engaged or in bypass mode; buffered bypass allows the effects loop to remain in your signal path when the gate is bypassed. A built-in AC jack accepts a standard power supply like the EHX 9.6DC unit (optional) and the pedal comes with a 9V battery.

Conquer noise with The Silencer!
Read more
 2 in stock $67.75
Click for better price!
quote 581756
Cat: 560358 Rel: 02 Feb 15
 
Analogue phase shifter effects pedal with true bypass for maximum signal path integrity
Notes: Get the sound that made the Classic 1970 Small Stone famous. Generates thick sweeping phase shifting with liquid transparency. Feedback colour control adds a tingling swirl. Blues players dig the Stone's rapid rotating speaker effect. Country players add tasty seasoning to their chicken pickin'. Metal-heads dig its jet plane swoosh.

- Nano chassis
Read more
 3 in stock $69.84
Click for better price!
quote 560358
Cat: 738558 Rel: 16 Jul 19
 
3-way FX pedal switcher & mixer
Notes: EHX's Tri Parallel Mixer is a powerful effects creation and mixing hub. Three separate FX loops with flexible controls allow for multiple configurations, as follows:

- Run up to three FX Loops in parallel and create sounds that are not possible by connecting effects in series.
- Switch seamlessly between FX Loops in XOR mode
- Send one instrument out to three separate amplifiers
- Mix three instruments into a single output.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate. The Tri-Parallel Mixer comes with an EHX 9.6DC power supply.
Read more
 1 in stock $133.42
Click for better price!
quote 738558
Cat: 714402 Rel: 31 Dec 18
 
3.5mm TS Cable Splitter
Notes: Why take up space in your rack when you can mult signals externally? Our cable splitter takes a single input and splits it to 5 outputs.

3.5mm TS Cable Splitter

1 input, 5 outputs
Read more
 5 in stock $6.24
Cat: 643212 Rel: 14 Mar 17
 
Professional 5-pin DIN plug to 5-pin DIN plug MIDI lead with screened cable
Notes: Black 2m heavy duty 4 core screened 5-pin MIDI plug to 5-pin MIDI plug.
Read more
 1 in stock $1.36
Cat: 673003 Rel: 22 Dec 17
 
Channel sub-module of the high-quality, expandable CGM Creative Mixer system
Notes: The CGM Creative Mixer is a modular mixing solution for Eurorack modular systems, designed to obtain a flexible setup, providing all the tools you may need in studio and during a live performance, as well as everything you may want to control via CV. Up to 8 Channels may be connected to a single Group, taking care also of its powering. You can connect also up to 4 Groups to a Master module.

The Channel manages mono signals via the 3.5 mm input mono jack. It has a main stereo VCA with CV in and attenuator (RED), a direct output post main VCA (pre or post fader), two parallel sends with mono VCA with CV in and attenuator for each send and pre/post fader switch (YELLOW and GREEN), and a PAN control with offset CV and offset pot. This, together with the latching buttons for mute, solo in place, and PFL, manages the incoming signal and distributes it to the Group module.
Read more
 1 in stock $170.94
Cat: 673004 Rel: 13 Dec 17
 
GROUP sub-module of the high-quality, expandable CGM Creative Mixer system
Notes: The CGM Creative Mixer is a modular mixing solution for Eurorack modular systems, designed to obtain a flexible setup, providing all the tools you may need in studio and during a live performance, as well as everything you may want to control via CV. Up to 8 Channels may be connected to a single Group, taking care also of its powering. You can connect also up to 4 Groups to a Master module.

The Group gets and sums the L/R post fader signals (WHITE) of all the linked Channels, sums all the signals from the YELLOW and GREEN sends, and manages the sends (mono) and returns (DUAL MONO or STEREO), summing it to the signals from the CHANNELS. It also manages the solo in place activation on all the linked Channels, and provides a L/R output for the outgoing signal, or (via a jumper on the back of the module) a L/R output of the sum of the returns signals.
Read more
 1 in stock $168.86
Click for better price!
quote 673004
Cat: 673005 Rel: 13 Dec 17
 
Master sub-module of the high-quality, expandable CGM Creative Mixer system
Notes: The CGM Creative Mixer is a modular mixing solution for Eurorack modular systems, designed to obtain a flexible setup, providing all the tools you may need in studio and during a live performance, as well as everything you may want to control via CV. Up to 8 Channels may be connected to a single Group, taking care also of its powering. You can connect also up to 4 Groups to a Master module.

The Master sums the incoming signals from the Groups, and manages the PFL (stereo) of both Channels and Groups. It also features a stereo in via a 3.5 mm stereo jack with PFL latching button and a stereo out via 3.5 mm stereo jack for headphones, whose signal can be blended between PFL (BLUE) and main out (WHITE).
Read more
 1 in stock $134.45
Click for better price!
quote 673005
Cat: 614155 Rel: 16 Jun 16
 
Eurorack multi-waveform syncable Low Frequency Oscillator (LFO) module based on Electric Druid TAPLFO2D family of code - 4HP wide
Notes: Wave Runner LFO:
Wave Runner is a multi-waveform sync-able LFO based on the Electric Druid TAPLFO2D family of code, but with some significant additions and improvements. The TAPLFO2D-FC PIC and code is exclusive to Frequency Central and was developed specifically for the Wave Runner, and is not compatible with similar modules.

8 waveforms:
- sawtooth
- ramp
- pulse
- triangle
- sine
- noise
- sample and hold
- stepped triangle/sawtooth/ramp

All waveforms can be skewed using the Distort knob, as well as control over pulse width of square, and distortion of the cyclic waveforms, this get you control over Noise freq as well as bitcrushing, bitcrush of S/H down to 1 bit for random triggers.

Tap sync input, for syncing to whatever. Wave Runner measures the last two incoming pulses and syncs itself to these. Multiply knob allows for Wave Runner to run at x0.5, x1, x1.5, x2, x3 and x4 of the incoming sync pulse. Freq is from stupid slow (0.025Hz) into low audio range (50Hz).

The latest version also features Level CV input to control the absolute output level of the LFO.
Read more
 2 in stock $114.65
Cat: 669270 Rel: 26 Mar 18
 
Headphone holder for attachment to desks
Notes: This hanger clamps to any desk with 5 to 45 mm thickness to put your headphones in easy reach. It features two convenient slots to keep your headphone cables neat and tidy, and the plastic set screw tip protects your desk's finish.
Read more
 1 in stock $7.82
Cat: 690914 Rel: 26 Jul 18
 
16 output ultra-flexible MIDI to Trigger, Sync, Polyphonic CV, Gate & more
Notes: The Mutant Brain is the central nervous system connecting your modular analogue Eurorack system to MIDI gear, especially for percussion, polyphonic notes and sync duties! It packs 16 Eurorack compatible outputs into a tiny, super affordable 8HP package.

The 4 CV outputs and 12 Gate/Trig outputs are all universally reconfigurable. Triggers, gates, clock divisions and sync signals, polyphonic keyboard playing, velocity, sequencer transport, LFOs - you name it!

Configuring your patch is easy - just assign each output as you like in the Mutant Brain Surgery configuration utility, then send the MIDI SysEx file to the module and forget about it - the Mutant Brain remembers it all for you.

Hexinverter supply a convenient download pack of pre-configured, ready to use Mutant Brain patches for some select sequencing and drum machine devices on the market today, easily turning those sequencers and drum machines into a modular control powerhouse!

Designed with live and studio performance in mind, the Mutant Brain does away with wasted panel space and complex menu-diving interfaces, while freeing you from the limited "auto-learn" type MIDI interface. An auto-learn interface sometimes doesn't play well with the limitless combinations of different gear setups which today's modular performers play live with.
Read more
 7 in stock $148.01
Cat: 602200 Rel: 04 Apr 16
 
Dual balanced line audio input and balanced line audio output synth module - 24HP wide
Notes: Dual Balanced Line Audio Input and Balanced Line Audio Output

This module allows you to interface your Eurorack modular system to the pro balanced line level world (+4 dBu). You can send and return to rack mount/desktop FX units, patch to external line-level instruments like synths and drum machines, interface to a DAW, and much more.

This module connects to the Audio I/O JACKS module via ribbon cable. The same ribbon cable can be used to connect to the rear-mounted audio jacks of the 7U performance cases
Read more
 7 in stock $103.19
Cat: 655960 Rel: 03 Jul 17
 
Quality wood tipped maple drumsticks
Notes: - Pair
- Maple
- Size: 5A
- Length: 406 mm
- Diameter: 14 mm
Read more
 1 in stock $0.99
Cat: 732457 Rel: 28 Aug 19
 
Desktop module version of the now classic synth
Notes: Minilogue XD module is the new desktop module version of Minilogue XD, the four-voice polyphonic analogue synthesiser with a customizable digital multi-engine and built-in stereo digital effects.

The desktop module is equipped with the same controllers as the keyboard version, making it a great choice not only as an additional sound module for your keyboard or DAW but also providing excellent performability, giving you an easy way to include an analogue polyphonic synth in your setup. It's also equipped with a poly-chain function that lets you connect it with another Minilogue XD or Minilogue XD module so that the two units can operate as a polysynth with a total of up to eight voices in your studio or on stage.

Add the sounds of the Minilogue XD to your setup or system!

Equipped with an analogue synthesiser circuit and a digital multi-engine:

Voice structure of Minilogue XD is 2VCO + MULTI ENGINE, 1VCF, 2EG, 1VCA, and 1LFO. In addition to the distinctive circuits found in the series, such as wave shaping to shape the overtones of the oscillator and a sync/ring switch, there's also cross modulation, a two-pole filter that can be both sharp and fat, and a drive switch that adds thickness and drives signal into Minilogue XD's filter. Every parameter has been tuned in detail based on what musicians want out of their synth. The sounds range from the warm pads typical of analogue to fat basses and crisp lead sounds, covering every situation.

The additional sound design possibilities of digital sound are delivered by the multi-engine: the third oscillator in addition to the two analogue VCOs. This engine, which is equipped with three different types of sound generator (noise, VPM, and open-source user oscillators) lets you take advantage of a sonic character that's different than analogue, and use it at the same time as the analogue engine, infinitely expanding XD module's potential through hybrid sound design.

High-quality digital effects:

Minilogue XD's high-quality digital effects use 32-bit floating point DSP processing, adding a finishing touch to its deep sound design platform. The three types (modulation effects, reverb, and delay) can be used simultaneously, letting you choose from a wide range of variations including chorus, ensemble, warm tape delay, and a diverse variety of reverb. The user effect slots allow you to load your own effect programs that you've created.

User customization brings out infinite potential:

The Minilogue XD features a customizable open-source environment. The unit comes with 16 user oscillator slots and 16 user effect slots that you can customize. Oscillators and user programs that you've created with the SDK (Software Development Kit) can be loaded into the Minilogue XD via the dedicated librarian software, as well as oscillators other users share online.

What sounds can you create using the fusion of expanded digital oscillators with analogue synthesis? Create original programs, share code, and participate in the user community. KORG even provides sample code to get you started.

Polyphonic Step Sequencer:

One of the major features of the Minilogue XD series is its 16-step step sequencer. Each of the factory-preset programs has an embedded sequence pattern created with performance in mind.

The step sequencer provides 16 steps, and supports both realtime recording and step recording. You can use the 16 step buttons to select a step directly, allowing quick editing to replace the pitch of a step or to mute it, or even improvisatory performances. Motion sequence lets you record the movements of up to four knobs, adding time-varying change to the sound, and you can record not only smooth changes in value but also values that change precisely at each step. You can use this to have different parameter values at each step; for example, you might create a drum pattern or sound effect from just a single program. This allows countless ideas to be unleashed.

Poly chain support:

The Minilogue XD module can be used in conjunction with another unit in the Minilogue XD series for poly assignment settings. Specify one unit as the master and the other as the slave, and they will play as an eight-voice polyphonic synthesiser. This supports a variety of uses, such as a voice-expansion module for the Minilogue XD or as a sound module for a DAW-based production system.

Free bundle of music software:

The Minilogue XD module comes with a diverse variety of music software from Izotope including "Ozone Elements" which lets you not only create songs but also master them using AI, "Skoove" which will help you improve your keyboard playing skills, "Reason Lite" DAW software, as well as software synths from KORG and other brands.
Read more
 1 in stock $572.24
Click for better price!
quote 732457
Cat: 672832 Rel: 11 Dec 17
 
Neoprene microphone case, suitable for 1-2 microphones & accessories
Notes: The light universal bag provides ideal protection and convenient storage for your microphones. Though compact in size, it is large enough to hold up to two microphones or accessories, such as microphone clips, spare capsules and microphone cables.

Made of durable and flexible neoprene, it is neat, functional and elegant in design. The bag is closed with a robust, continuous zip fastener.

It is suitable for all wireless microphones from the LD product family, as well as all other commonly available wireless microphones.

- Durable universal microphone bag made of 3 mm neoprene
- Space for general equipment such as microphone clips, spare capsules and batteries
- Soft fleece lining
- Robust, continuous zip fastener
- Holds up to two microphones or other equipment
- Dimensions: 300 x 100 mm
Read more
 2 in stock $5.99
Cat: 465125 Rel: 16 Nov 12
 
32 note USB MIDI controller keyboard featuring mini keys
Notes: The M-Audio Axiom A.I.R. Mini 32 delivers the smallest and most portable keyboard version of this new range of hybrid USB keyboard/pad controllers, offering beat makers, groove creators and keyboard players a space efficient yet comprehensive control surface. M-Audio Axiom A.I.R. Mini 32 offers an instant, fully immersive music creation experience and ships with ground breaking Ignite software. Axiom AIR Mini 32 features 8 high quality pads and illuminated buttons, plus an array of knobs crafted to provide an unobstructed evolution of musical ideas.

The Axiom A.I.R. Mini 32 controller provides an instant, fully immersive music creation experience. The Axiom AIR 32 features 32 ultra responsive keys, 8 trigger pads, multi colour buttons, long throw faders and assignable low profile knobs, crafted to provide an unobstructed evolution of musical ideas, from conception to expression.

The M-Audio Axiom A.I.R Mini 32 controller comes bundled with Ignite, a new software with a revolutionary approach to music creation. Ignite is a discrete, standalone music ideation and creation software built from the ground up to spark creative ideas and enable musicians to build songs in an organic fashion. Ignite is a fantastic partner to the AIR 32 enabling you to unlock your creative energy and construct songs in an instinctive and satisfying way.

***NOW INCLUDES VIP 3.0 - The ground-breaking, award-winning music software platform that provides musicians and composers with a powerful hands-on control solution for their virtual instrument and virtual effect collection***

Experience expanded control of your VST instrument and effect collection with Axiom Air Mini 32 and VIP3.0 (Free Download Included).

VIP3.0 provides you with unparalleled access to your virtual instrument and effect collection, seamlessly integrating the hardware / software experience and grants the unrestricted freedom to create in a user-friendly, intuitive format. The combination of VIP and Axiom Air Mini 32 maximizes workflow and ensures a playing experience that feels natural and enhances creativity - the natural, tactile feel of hardware fused with the unrivalled processing capability of virtual Instruments.

Quickly find sounds based on instrument type, timbre, style or articulation from your entire VST library; sculpt immersive, expressive sounds and textures layering up to 8 separate instruments and patches per VIP instance; load up to 4 different VST effects per instrument channel to sculpt the perfect sound; put power into your performance with Pad Chord Progressions and user-friendly Key Control processors; and much more. From live performance to studio production, VIP's user-friendly functionality coupled with a diverse feature set guarantees simple, seamless integration into your existing setup and provides the ultimate platform for unrestricted creative expression.

***UPDATED SOFTWARE COMPATIBILITY***

Pro Tools First and Eleven Lite software are now included with the current line-up of M-Audio keyboards and interfaces - for all existing and new customers! The industry-standard Pro Tools music software bundle and the Eleven Lite plugin gives artists unprecedented creative options with the most realistic virtual instruments/effects anywhere.
Read more
 1 in stock $61.50
Click for better price!
quote 465125
Cat: 525238 Rel: 07 Aug 14
 
49 synth action velocity sensitive key USB MIDI controller keyboard with 8 trigger pads
Notes: M-Audio pioneered the portable MIDI controller market with the Oxygen series of keyboard controllers. Today, M-Audio continues to be a leader of this technology by developing intuitive controllers for software-based music production and performance. Thanks to continued innovation over the course of nearly a decade, the new Oxygen series controllers offer more control, deep hardware/software integration, and come equipped with a reliable build that enables you to make music on the go or implement these controllers into any studio.

With an array of assignable knobs, pads, and faders, Oxygen 49 gives you total control over your software, allowing you to stay engaged in the creative flow of recording and mixing music without ever reaching for the mouse. It features 49 velocity-sensitive keys for playing chords, bass lines, and melodies; eight assignable knobs for tweaking effect plugins and virtual instruments; eight velocity-sensitive pads for triggering samples or finger drumming; and nine assignable faders for mixing tracks together and controlling the master output. Oxygen 49 also has dedicated transport controls and track-up and -down buttons that allow you to initiate play, stop, and record in the DAW environment right from your keyboard controller.

The Oxygen 49 MIDI controller offers out-of-the-box integration with popular DAWs including Ableton Live, Pro Tools, Logic, Cubase, and many more. Oxygen 49's controls instantly map to key parameters in your favorite DAW, enabling you to immediately tweak the mixers, editors, and transport windows. Additionally, Oxygen 49 has built-in customizable mapping presets that quickly interface Oxygen 49 with your favorite effect plugins and virtual instruments. The factory presets map Oxygen 49 to the bundled software, SONiVOX Twist, so you can plug in and start making music right out of the box. Setting up a MIDI controller with your software doesn't get any easier than this.

Ableton Live Lite is included with Oxygen 49 for immediate music creation. One of the most popular performance and production programs available in the world, Ableton Live Lite is a powerful music creation tool that enables musicians and producers to spontaneously compose, record, remix, improvise, and edit musical ideas in a fluid audio/MIDI environment. Host plugins and use Oxygen 49 to produce, compose, or perform all within Ableton Live Lite. When you are satisfied with your work, Ableton Live lets you save it or mix it down.

SONiVOX Twist is a spectral morphing synthesis virtual instrument. Comprised of a dynamic interface, an advanced pattern generator, and onboard effects, Twist lets you create serious sounds using simple controls. Two swirling sound layers provide unique harmonic controls and form the basis of every patch. Sculpt your sound with a multi-mode filter, independent amp and filter envelope generators, and a LFO that can be sync'd to tempo.

***NOW INCLUDES VIP 3.0 - The ground-breaking, award-winning music software platform that provides musicians and composers with a powerful hands-on control solution for their virtual instrument and virtual effect collection***

Quickly find sounds based on instrument type, timbre, style or articulation from your entire VST library; sculpt immersive, expressive sounds and textures layering up to 8 separate instruments and patches per VIP instance; load up to 4 different VST effects per instrument channel to sculpt the perfect sound; put power into your performance with Pad Chord Progressions and user-friendly Key Control processors; and much more. From live performance to studio production, VIP's user-friendly functionality coupled with a diverse feature set guarantees simple, seamless integration into your existing setup and provides the ultimate platform for unrestricted creative expression.

***UPDATED SOFTWARE COMPATIBILITY***

Pro Tools First and Eleven Lite software are now included with the current line-up of M-Audio keyboards and interfaces - for all existing and new customers! The industry-standard Pro Tools music software bundle and the Eleven Lite plugin gives artists unprecedented creative options with the most realistic virtual instruments/effects anywhere.

***NOW INCLUDES 2GB SOUND LIBRARY OF IN-DEMAND SOUND CONTENT FROM TOUCH LOOPS***
Read more
 1 in stock $123.76
Click for better price!
quote 525238
Cat: 666811 Rel: 17 Oct 17
 
General purpose DC 9 V power adapter matching all Mooer effects pedals
Notes: Mooer Stage Power Supply PDNT9V2AUK makes the ideal accessory for powering your favourite Mooer guitar effects pedals. Mooer Stage Power Supply PDNT9V2AUK can deliver up to 2 Amps at 9-volt (DC) 2 and features a pedal board style design. PDNT9V2AUK power supply when used with either the 'Power Cable Daisy Chain' PDC-5A (for 5 x pedals) or the PDC-8A (for 8 x pedals), can drive up to eight Mooer FX pedals.
Read more
 1 in stock $17.71
Cat: 450822 Rel: 22 Mar 12
 
Black metal microphone stand with boom arm
Notes: A metal professional standard floor microphone stand with boom arm that is adjustable for height, angle and extension. The product features tripod style foldaway legs and has a remarkable stability when in use. The Boom arm extends 760mm.




Read more
 1 in stock $15.11
Cat: 515277 Rel: 06 Dec 13
 
Latching footswitch for use with amplifiers and instruments etc
Notes: Heavy Duty Latching Foot Switch with 1.75 m heavy duty lead with 6.35 mm mono jack plug.
Read more
 1 in stock $9.94
NUX Monterey Vibe Pedal (effect pedal)
NUX
Cat: 712769 Rel: 29 Nov 18
 
Features all of the classic Uni-vibe style selections
Notes: NUX Monterey Vibe, born to recreate the grand, yet complex, psychedelic rock guitar sound of the 1960's and 70's. NUX Monterey Vibe, born to recreate the grand, yet complex, psychedelic rock guitar sound of the 1960's and 70's. It features all of the classic Uni-vibe style selections: Chorus, Rotary-Speaker, and Phaser pedal.

We modernized the original 4 stage phaser circuit ( a pulsating bulb surrounded by 4 photo-resistors ) by replacing it with a powerful 32Bit floating DSP to process our custom algorithm. What was the outcome?
A perfect mimic of the complex physical-phenomena of its original analog circuitry. NUX Monterey Vibe generates a truly unique effect tone; a mix of chorus, tremolo, rotary, and phaser.
This unique tone can be found in Pink Floyd's 'Breathe', Robin Trower's 'Bridge of Sighs', and the haunting audio mood created for 'Machine Gun' by Jimi Hendrix.
The earliest Uni-Vibe effect pedal came out in the 1960's. Cutting-edge guitarists were seeking a replacement for the heavy rotary speaker amplifier--configured from a standard amplifier for the electronic pipe organ.

The original Leslie speakers did have a charm of their own, but it was more than compensated for by gaining the phaser effect, and the ease-of-use of a simple pedal configuration. Just like the traditional Uni-Vibe pedal, you can switch between Chorus ( the Uni-vibe effect ) or Vibrato, by simply holding the foot-switch. In Chorus mode, the mix of Phaser and dry guitar signals produces a classic Rotary sound. In Vibrato mode, your pitch modulates between high and low. Both modes yield a rich, vintage vibe at any speed, intensity, or volume.
Read more
 2 in stock $40.64
Click for better price!
quote 712769
Cat: 647537 Rel: 28 Apr 17
 
Dynamic mic switcher
Notes: The Palmer DMS (Dynamic Mic Switcher) routes a microphone signal to two footswitch-selectable outputs.

The Palmer DMS is a passive unit for dynamic microphones only. The switch is instantaneous and is operated via a footswitch.

The DMS provides a wide range of applications:

- Switch your vocal mic between the FOH and monitor mixing desks to communicate with the monitor mixer or the band on stage.

- Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the DMS into two channels of the mixing desk, that you can configure
differently. Now you can freely toggle between them on-stage at any time.

- You can also use the DMS to route the signal to two rooms or zones and select either one.
Read more
 2 in stock $47.09
Cat: 647540 Rel: 28 Apr 17
 
Power conditioner for use with pedals & pedalboards
Notes: Designed especially for the use with effect pedals and pedalboards, the Purifier minimizes and removes noise induced by poor DC power adapter construction delivering clean DC power to your stompboxes. It provides standard 2.1 x 5.5 mm barrel jack connectors and automatically detects your DC power supply's polarity. The Purifier cleans any output voltage from 5 to 30 volts DC.
Read more
 3 in stock $21.28
Cat: 647580 Rel: 28 Apr 17
 
Passive DI box with transformer balanced XLR output
Notes: Passive DI box. Jack input with parallel "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Read more
 1 in stock $43.32
Sennheiser HD600 Headphones (studio reference headphones)
Cat: 405262 Rel: 24 Sep 10
Notes: Sennheiser's HD600 studio headphones are designed in particular for use listening to DAT, DVD, MD and CD sound sources. These headphones are built for studio engineers recording and mixing high definition sound sources where the requirement clarity and detail is an imperative.
Read more
 3 in stock $275.52
Click for better price!
quote 405262
Cat: 531916 Rel: 02 Sep 14
 
Powerful analog filtering and distortion unit
Notes: What is the Sherman Filterbank 2?

A powerful analog filtering and distortion unit with a huge frequency range and a killing TUBE overdrive behavior.
Easy and FUN to use, live and in the studio
A small modular system? YES!
Another 303 clone? NO!
Affordable? YES!
Application: processing every sound source, effect mixing, expanding modular systems, etc.

What you get:

Independent low pass, band pass and high pass filters with resonance, frequency and ADSR (positive - negative) controls
These are switchable between parallel or serial
The second filter has a 6 octave switch, and is synchronizable with the first filter
1 ADSR generator for these filters with an external output for use with more filterbanks or modular systems, triggered by the incoming signal, by a second sounds source, or by a gate
1 FM input for the filters, internal or external audio, LFO or CV
1 VCA overdrive with AR generator also
1 ring modulator input, internal or external audio, LFO or CV

The original Sherman Filterbank (Version 1) is no longer being made and is thus now completely being replaced by this new version !

The global look has remained the same, but there have been added several strong functions. To summarize :

There are 5 extra NEW SWITCHES, 1 extra INPUT (for footpedal), 2 extra new LEDs, a NEW COLOR (silver-grey) with an improved (long-lasting) varnish layer.
The inner electronics have also been adapted to achieve an EVEN BETTER SOUND-QUALITY
We also do have new packing-boxes (silver, with photo on upper side), new flashy stickers (silver) and new adaptors (with Sherman-logo).
All this with the famous solid SHERMAN-QUALITY and the well-known thorough & speedy AFTER-SALES service (repairs).

What's new?

There are 5 extra switches and 2 extra LEDs, and on the back panel there's one pedal input jack. A reworked front-panel lay-out and the grey metal color.

The pedal input allows foot control of freq1and bypass/effect switching. You can rewire an old wah (because they have a switch on board) as shown by te diagram in 'extra stuff'.
A 5mm big green LED indicates "Effect on" on the FB 2
A 3-way switch on the input stage allows Hi boost as well Hi cut (both boosting high frequencies at input)
Another 3-way switch allows "Sensitrig" (which makes the triggering twice as sensitive for, e.g. clean string pad filtering) and "Limit", which leaves the filters more "breathing room" for self-oscillation if the input stage is extremely overdriven.
A 3-way switch has 2 general transpose functions : +1 Octave and + Quint which works nice with monophonic signals, and has a specific dirty character.
A 3-way switch for the really powerful and quite revolutionary "Tracking" function - a monophonic pitch follower, that tunes filter 2 to the incoming pitch, and makes filter 1 slave of filter 2 via the harmonics switch. E.g. in position 2, filter 1 will be pitched one octave higher than filter 2, but still following the pitch. This extra switch activates the "tracking" in a normal or deep "track low" position, with stunning basses as result.

The "revolutionary" aspect of this function is that never before any similar system enhances "on the spot" harmonics and creates new harmonics with fat analog circuits.
An extra white LED indicates when the tracking system is "locked on".
At last there is an 3-way function switch in the LFO section, allowing sawtooth wave shape OR AR retrig : this forces an LFO restart from the AR trig with pumping grooves as unavoidable result. If you want to receive a new brochure, please ask your dealer first.

The Sherman Filterbank is now also midi controlable via kenton control freaks (a small portable hardware console, including sliders)

All the finger-tip MIDI control you need, instantly to hand. Forget your mixer maps and do it all in real-time. An ideal solution for the gigging musician, or the musician who likes to save time & settings. The Kenton Control Freaks are made in the U.K., by Kenton, and are preprogrammed with profiles for the Sherman Filterbank as well. Hundreds of additional profiles are available for download FREE from the Kenton website.

PLEASE NOTE: SUPPLIED WITH EU 2 PIN ADAPTER PLUG ONLY.
Read more
 1 in stock $697.31
Click for better price!
quote 531916
Cat: 719563 Rel: 14 Feb 19
 
Custom made stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: Holds 3 Roland Boutique synths, ideal if you have the full range. The stand has been made from MDF wood and is connected via 12 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wooden bar.

These are a great addition to the Boutique synths and give a much nicer look and better working angle. They can also be painted or stained with ease to suit your studio.
Read more
 2 in stock $43.77
Click for better price!
quote 719563
Cat: 719497 Rel: 13 Feb 19
 
Precision machined dual Korg Volca stand
Notes: This new version of the Korg Volca stand has been precision machined with a CNC machine. A recess for each Volca has been cut into the sides so once assembled it becomes very strong and has great stability for live performance, giving you the peace of mind that your gear is safe.

The stand is made from MDF and is connected via 8 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wood bar. Can also be painted with ease or stained with wood stain to suit your studio.
Read more
 1 in stock $37.51
Cat: 719539 Rel: 13 Feb 19
 
Custom made recessed stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: Holds 3 Roland Boutique synths, precision machined with a CNC Router so the boutiques lock firmly in place. Will fit all the Roland Boutiques - however, you will need to remove them from the additional case (DK01).

The stand has been made from MDF wood and is connected via 8 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wooden bar. These are a great addition to the Boutique synths and give a much nicer look and better working angle.
Read more
 1 in stock $57.32
Click for better price!
quote 719539
Cat: 719555 Rel: 14 Feb 19
 
Custom made solid oak Roland Boutique stand/end cheeks
Notes: This stand holds 2 Boutique synths. It has been made from solid oak wood and is connected via 8 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wood bar.

A great addition to the Roland range of synths, giving a much nicer look and working angle, plus now with more space for cables.

Also compatible with the Waldorf Blofeld & Pulse 2.
Read more
 2 in stock $51.06
Click for better price!
quote 719555
Cat: 719534 Rel: 13 Feb 19
 
Custom made wooden end cheeks for Roland System 8
Notes: These end cheeks have been hand crafted from Solid Oak to give your System 8 a much nicer look.

The cheeks attach using the existing screws from the System 8 and takes a few minutes to add a touch of class to your synth.
Read more
 2 in stock $46.89
Click for better price!
quote 719534
Cat: 560992 Rel: 05 May 15
 
Bassline synthesiser and sequencer with parameter locks, punch-in effects and play styles
Notes: Bass line synthesizer and sequencer with parameter locks, punch-in effects and play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!
Read more
 1 in stock $46.89
Cat: 700726 Rel: 28 Aug 18
 
Random sampler featuring two channels of variously shifting random control voltage - 18HP
Notes: Rooted in the California modular tradition, the Random Sampling is a selection of random voltage sources to add an element of uncertainty to both audio and control paths. Some of them classics and some new twists. Included are 2 fluctuating randoms capable of slowly varying voltage or sweepable audio noise, each with an uncorrelated random gate output. A two output, up to 6 bit digital stored random voltage source. White, pink and metallic (TR- 808 cymbal type) audio noise. A 4 stage analog shift register where each sample & hold can be broken out of the chain to be used separately.
Read more
 1 in stock $507.62
150/50(ページ1/1)の商品

Filter

Back In Stock: Studio Equipment
Back in stock period
Release Date
Close