Back in stock: Studio Equipment

Notes: NANOPATCH X is a tiny patch bay with the primary function of connecting to guitar pedals and other effects processors. It can be used in conjunction with NANOPATCH M or standalone, for a variety of purposes.

It also works with CV, so can be used as a breakout box for semi-modular synths with outputs in hard-to-reach places (e.g. Moog Grandmother) and devices that output CV over TRS sockets (e.g. MPC ONE).

Dimensions: 76 mm x 70 mm x 22 mm (not including sockets and feet)

How It Works

Each 1/4" TRS socket on the back corresponds to two mono TS mini jacks on the top panel.

By using insert cables (TRS to dual TS), connect up to four pedals to a single NANOPATCH X.

The inputs and outputs of the pedals are then easily accessible via the top panel, using standard eurorack or TRS cables.

Patching can be done directly from instrument to mixer or via a NANOPATCH M.

Notes: The DigiTechr Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your toes.

General Specifications
Input1/4" Unbalanced (Tip-Sleeve)
Output1/4" Unbalanced (Tip-Sleeve)
ControlsAmount, Momentary On/Off
A/D/A Converter24-bit
Sampling Rate44.1 kHz
Power SupplyPS0913DC-01 (US, JA); PS0913DC-02 (EU, AU, UK)
Drop Tune Range1-7 Semitones Down, Octave Down, Octave Down + Dry
Dimensions
Length4.75"
Width2.875"
Height1.75"
Weight0.36 lbs.

Notes: Blank panel, 8HP, constructed from anodised aluminium, silver.

Notes: Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available:

- Gate Input (min. +5V)
- CVN Input (defines the Midi note number), 1V/octave standard, range 0...+10V (i.e. 10 octaves)
- CVV Input (defines the velocity value assigned to the Midi note message), can be used alternatively for Midi volume (CC#7), range 0...+5V
- CVC Input (free assignable to any Midi control change number), range 0...+5V

For both sub-units a common CV Transpose input is available (1V/octave, range 0...+10V). The voltage applied to this input is added internally to CVN before the Midi note number is generated. It can be used e.g. to transpose two sequences simultaneously by one voltage.

How it works:

Whenever the rising edge of the Gate input is recognized a Midi note on message is generated. The note number corresponds to the sum of the voltages applied to the CVN input and the common CV Transpose Input that is present at the rising edge of the gate signal.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.

This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.

The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.

Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.

If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.

Notes: Erica's flagship drum machine is a thing of beauty. Hybrid four-voice architecture with digital sound engines feeding into analogue filters and overdrive. Beautiful design, brutal sound. A creative and original instrument.

Supplier's Notes:
It's rather sudden- the bolt of lightning strikes quickly, but the roar follows behind, as if giving one time enough to inhale. Finally, it strikes your ears like the skies breaking apart and in all its magnificence it rides the wind. PERKONS - a deity of old known by many names and also by ours on the eastern coast of the Baltic Sea - THUNDER, lord of the skies. Erica Synths proudly present our newest creation - PERKONS (THUNDER) - a drum machine and synthesizer that will change your approach to electronic rhythm synthesis - an instrument which bears the weight of a storm beneath its sturdy casing.

PERKONS features four sonically versatile hybrid voices (digital sound engine + analogue multimode filter with overdrive) and a sequencer with simultaneous control over all four percussion tracks.

Each voice has 3 sound engine modes, a HP/BP/LP filter and 8 controls for nuanced sound design, including an internal BBD FX send. All voice parameter settings can be saved as KITS. To add dynamics to the performance, parameter automation is implemented and a modulation LFO can be assigned to all parameters.
For a real thunderstorm, integration with external gear is considered - each voice has a dedicated velocity-sensitive trigger input, individual output and FX send and return with 6.3mm jack sockets, along with extensive MIDI implementation. All voices are summed and run through a built-in optical compressor and master overdrive.

PERKONS HD-01 is a unique live performance and sound design instrument that tears down the borders between drum machine, synthesizer and drone instrument. Time to ride the skies!

Features:

4 hybrid voices (digital sound engine and analogue multimode filter with overdrive)
8 controls per voice
Velocity sensitive trigger inputs for drum pads
Individual voice outputs
Individual sends and returns
64 kit and 64 pattern memory + additional memory on the SD card
Built-in bucket brigade delay and optical compressor
Modulation LFO with morphing waveforms; up to 8 modulation destinations per voice
4 track sequencer, 4 time divisions and 4 time multiplications per track
Per-step ratchets and probabilities
4 shuffle algorithms
MIDI IN and MIDI OUT

Notes: ***B-STOCK: Without original box, product in perfect working order***


Pico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!

Notes: Really versatile little MIDI controller designed to add hands-on control to software and even hardware. 16 push-button rotary encoders plus function buttons and OLED display.

Supplier's notes:
This all-rounder has 16 gridless push-encoders, 7 function buttons and a large OLED-display. Encoders are switchable to 16 groups that allow controlling a total of 256 control parameters per setup. The display shows the current values of all controls or editable encoder/group/setup names. Various kinds of MIDI commands are possible, like program change, pitch bend, aftertouch, NRPN, and control change in relative and absolute mode with different acceleration amounts. All these properties are easily and efficiently programmable on the device, allowing personalized customisation for each separate control.

The encoders can work as high resolution 14bit controllers too (NRPN, control change or pitch bend). This makes them suitable for sensitive parameters like resonating filter cutoffs, etc.

Use the internal 16 setups to save your individual settings. Backup and restore of all settings by SysEx dumps are possible too.

The factory settings are perfect to control music and video software products out of the box. Thus, any additional device programming isn't necessary for many applications.

The little box is also a great extension for your Ableton Live setup. There you can control all the continuous parameters like track volumes, rack macros, send amounts, and track pannings. A special control surface script for Ableton Live, including all necessary mappings, is enclosed in the package.

Working with this amazing power box will prove to you that it is a trustworthy, reliable, and invaluable asset to your productions.

Notes: MX12 as successor of the UC44 is a universal controller for all kinds of MIDI controllable hardware and software.

You can combine NEW MODULE devices to a large system. The connections are on the right side to allow a back to back placing of two or more devices. Connect two NEW MODULES by a special extension port.

Furthermore, there are 4 MIDI-ports and one USB-port with various routing possibilities.

It is packed in a metal case with the same dimensions like the famous ELEKTRON devices so it's a great extension for these devices. But you can use the mix controller also with your DAW like a classical 12-track-mixer.

The device has 24 standard pots, 12 Faders and 24 buttons in a 12-track-layout, various kinds of MIDI commands like control change, note on/off, pitchbend, aftertouch and program change are possible. You can program every MIDI command for every separate control on the device very fast and easily.

Of course you can assign the pots and keys to any of these commands by learning incoming MIDI commands, which is the same procedure you know from your software/DAW. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instrument, effect and DAW. Use the internal 30 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn't necessary for many applications.

Some special setups are preconfigured for use with ELEKTRON RYTM and ABLETON LIVE.

Check out this amazing power box and you will get a reliable mate...

Notes: More knobs than you can shake a stick at. Add hands-on control to pretty much any MIDI-equipped hardware or software. Upgraded version of the classic PC44, featuring a whopping 72 rotary pots and 12 buttons.

Supplier's notes:
PC12 as successor of the PC44 is a universal controller for all kinds of MIDI controllable hardware and software.

You can combine two or more NEW MODULE devices to create a large system. The connections are on the right side to allow a back to back placing of two or more devices. Connect two NEW MODULES by a special extension port.

Furthermore, there are 4 MIDI-ports and one USB-port with various routing possibilities.

It is packed in a metal case with the same dimensions like the famous ELEKTRON devices so it's a great extension for these devices. But you can use the pot controller also with your DAW like a classical 12-track-mixer.

The device has 72 standard pots and 12 buttons in a 12-track-layout, various kinds of MIDI commands like control change, note on/off, pitchbend, aftertouch and program change are possible. You can program every MIDI command for every separate control on the device very fast and easily.

Of course you can assign the pots and keys to any of these commands by learning incoming MIDI commands, which is the same procedure you know from your software/DAW. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instrument, effect and DAW. Use the internal 30 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn't necessary for many applications.

Some special setups are preconfigured for use with ELEKTRON RYTM and ABLETON LIVE.

Check out this amazing power box and you will get a reliable mate...

Notes: Digital 12-bit oscillators meet analogue filters in this creative little synth module. Six-voice polyphony, preset storage and MIDI control make for a compelling instrument with its own distinctive sound.

Supplier's Notes:
The Tooro is Fred's Lab's new 6-voice 4-part hybrid "digilog" polysynth.

Including the latest discoveries in mixed electronics, the original FL A847 analog filters, this is the perfect module for demanding sound designers and every musician seeking distinctive tones with a strong personality, in a very compact form factor.

Each voice offers 2 complex digital oscillators with waveform morphing, 2-operator linear phase modulation and self-sync features plus a noise source, a ring modulator, the unique FL A847 lowpass filter accompanied by a digital shaper, 2 advanced LFOs and 2 ADSR envelopes.

A modulation matrix with 8 slots allow the animation of most of synthesis parameters.

A master stereo digital FX offering various modulated delays is also included.

Tooro is shipped with a printed version of the QuickStart Guide (in English) and a 1 meter black USB cable.

Technical aspects:

All Fred's Lab instruments are produced and manually assembled locally in Germany.

The Tooro is a polyphonic and multitimbral synthesizer module with 6 voices, 4 parts, per voice analog filters and a stereo signal path.

Sound Engine

Per voice

Oscillators:
Two 12bit digital oscillators with:
waveform morphing
additional sine modulator (for linear through zero phase modulation)
auto-sync feature - hardsync

Filter:
A single FL A847 12dB/Octave low-pass filter with auto-oscillation and saturation features.

Shaper:
A selection of digital filters algorithms from Fred's Lab.

Noise:
A regular white noise source.

Ring modulator:
An audio rate multiplication of osc1 output by osc2 output.

Envelopes:
Two ADSR envelopes with hold stage and multiple triggering options.

LFOs:
Two complex LFOs with various waveforms and their own AD envelope.

DCA:
A digitally controlled attenuator with volume and panning control.
Per part
MIDI channel selection, overall part volume and panning.

A syncable arpeggiator with multiple modes is included.
Global
Multi-FX
A 12bit digital multi-FX module with various modulated delays.

Instrument:
Memory
The Tooro can store:
100 sound presets
10 multis

Connectivity:
2 line-level unbalanced 6.35mm jacks (mix left & right)
2 instrument-level 3.5mm jacks for separate voice outputs (for voice 1-4 only)
1 DIN5 MIDI-IN
1 DIN5 MIDI-OUT (OUT + smart THRU)
1 USB 1.1 B compatible port (for power and MIDI over USB)
1 power switch

UI:
4 high-quality metal encoders
14 tactile switches
dual digit 7-segment hexadecimal display
12 leds

Mechanics:
aluminum industrial enclosure
quality rubber feet
170 x 120 x 45 mm
550 grams

Notes: 3xMIA is a 6-channel attenuverting mixer/offset/scale/polarizer.

3 blocks of 2-channel attenuverting mixers, using dual concentric pots. Each channel can be switched to mix with the subsequent channel, allowing for 2-2-2, 4-2, 6 mix configurations.

With nothing plugged into an input, an offset is normalled to that channel. The inner knobs control the A inputs, while the outer knobs control the B inputs.

DC coupled, so it can be used for audio, CV, or both at the same time.

80 mA +12V
80 mA -12V
35 mm Depth
6 HP wide

Notes: Mix up to four stereo channels in just 4hp, or chain multiple modules together to add channels. Inputs are normalled for mono operation. Simple, compact and high quality at a reasonable price.

Supplier's Notes:
4xSt.Mixer is 4 HP quad stereo mixer.

Right inputs are normalled to Left inputs for easy mono operation

Several 4xSt.Mixers can be chained together or with other HN stereo modules via sockets on the back side

65 mA +12V
50 mA -12V
35 mm deep

Notes: 1U version of Happy Nerding's effects module, offering a total of 32 effects, with user-storable presets and CV control. Great value in a convenient package.

Supplier's Notes:
32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analogue Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long .wav file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Dimensions

24 HP
40 mm deep
Module is a 1U tile in Intellijel format

Current Draw

80 mA +12V
30 mA -12V

Notes: 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analogue Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets - stores selected program and all three controls. Spin FV-1 based.

The last used effect, assigns and presets are always remembered.

32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order.

Reflashing procedure is quite easy: playing 40 sec long .wav file of line level amplitude to CV input.

Reflashing mode: hold both buttons for 10 sec.

By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Dimensions

24 HP
40 mm deep
Module is a 1U tile in Intellijel format

Current Draw

80 mA +12V
30 mA -12V

Notes: PlayAUDIO1U allows every working musician access to an easy, seamless, simple & straightforward failover solution.

PlayAUDIO1U fuses iConnectivity's vast engineering knowledge of the live arena, passion for performance, and decades of experience into one product. PlayAUDIO1U ensures working musicians never suffer the embarrassment of a silent show, ever again.

PlayAUDIO1U's secret in part is integrating two computers connected directly to the interface, forming an incredible redundancy / failover protection system. Should your main computer fail, PlayAUDIO1U switches to the backup computer in a heartbeat; so fast that you and your audience won't even notice. Backing tracks keep playing in time and your MIDI gear stays connected. It does this all in a package that is completely designed from the ground up made-to-tour.

PlayAUDIO1U also ships with iConnectivity's new and improved Auracle 2.0. Auracle 2.0 is fast, flexible and intelligent, allowing performers to create a sophisticated live integration of all audio and MIDI connections, inputs and outputs; Auracle lets you do it in minutes, not hours.
"PlayAUDIO1U builds on everything we learned in creating and then supporting users of our PlayAUDIO12, an interface that quickly became the industry standard," says Al Joelson, VP of Sales and Marketing. "This interface is designed to be an even more ready-to-gig, comprehensive solution. It's a crazy powerhouse of audio and MIDI capability for live performance. "

Notes: Make any studio monitors sound better

High-definition monitoring for all

Upgrade any studio monitors instantly with the first out-of-the-box acoustic room correction system that anyone can afford. ARC Studio combines a standalone correction processor, new ARC 4 measurement software and a room analysis microphone.

There's a reason all today's top-tier studio monitors are adding active room correction - it supercharges their performance and ensures mixes translate flawlessly. ARC Studio offers this same massive boost in performance and accuracy to any monitor in every studio.

For the first time in the recording industry, an affordable hardware processor can be used as a correction and calibration system for any type of studio - be it home, project or professional - without the limitations of a software-only system.

Standalone digital acoustic correction system
Dramatically improves your mixing accuracy
Works with any monitor system in any room
Installs in minutes in any studio or space
Sonically invisible, audiophile performance
Emulates top monitors and playback systems
Customize your monitors' performance to taste

Improves mixing accuracy

Your room has a big impact on how you hear your music. The size, shape, materials and furniture all work to distort the frequency and stereo balance of your monitors, degrading your sound.

ARC 4's all-new algorithm analyses and corrects these issues in minutes. Your music snaps into focus, with more controlled low-end, tighter transients and pinpoint stereo imaging. It's like an instant upgrade to your monitors.

And when you trust what you hear, you'll mix faster and more confidently than ever.

Installs in minutes

Plug the mic into your interface and you'll be guided through measuring acoustical spots within your listening position. IK's award-winning ARC technology uses this 3D snapshot to identify and completely correct all the problematic issues degrading your monitors' performance.

An all-new listening experience

ARC 4 stores the correction profile and loads it into the ARC Studio processor, sitting invisibly between your interface and monitors to apply to all incoming signals. The standalone processor corrects studio monitors in any studio, including hardware- and console-based setups.

Audiophile performance

ARC Studio features a 120 dB(A) analogue input to analogue output dynamic range, 0.5 Hz to 40 kHz frequency response and ultra-stable clocking for vanishing low jitter, offering total sonic transparency and a level of accuracy you only find in mastering-grade audio converters.

And it connects to your studio and monitors via balanced XLRs with power-safe relay-based hard bypass - so when bypassed you're protected from sudden power-related pops. Between the premium audio quality and ARC Studio's all-new correction algorithm, you'll enjoy the most natural, transparent monitoring ever.

Affordably priced

ARC Studio hardware is not only designed and made in Italy to the highest precision and quality standards, but its clever engineering makes it available at a fraction of the cost of other hardware solutions.

Now everyone can dramatically improve the sound in their mixing environments: from a single pair of monitors to multiple monitoring systems, up to large facilities with multiple mixing and recording rooms.

Improves any studio

For pro studios, whether in-the-box or console-based, ARC Studio allows for a sonically transparent correction and custom-tuning for any monitoring setup from nearfields to mains, preserving the inherent system's sonic quality.

For DAW-based studios, ARC Studio frees you from the hassle of inserting plug-ins on the master bus of your work and preserves zero-latency monitoring setups, plus it allows you to listen to your preferred streaming service with acoustically corrected monitoring without messing around with system drivers.

You can create a profile for every configuration, listening position or even monitor pair. Whether you're in a makeshift studio or a world-class one, fine-tuning your monitoring to your taste has never been easier and has never sounded so good.

Customise your monitors

Customise your setup for ideal performance no matter your preference. ARC 4 offers deep control over each profile so it always sounds its best:

Target curves

ARC 4 now comes with 9 factory target curves for most situations. The default curve offers optimally balanced results with other specific curves for different needs or setups.

Adjustable correction range

By default, ARC corrects the entire frequency spectrum, but you can define limits to both upper and lower correction ranges separately. This is useful if you want to preserve the unique voicing of your monitors or are just looking to correct a certain frequency range.

Specs

ARC Studio Specifications

Audio

AD and DA converters: AKM Velvet Sound™
Audio conversion and internal processing sampling rate: 96 kHz
Audio conversion resolution: 24-bit
Internal processing resolution: 32-bit float
Frequency Response: 2 Hz - 45.0 kHz (- 2.0 dB)
Dynamic Range: 120 dB (A-weighted)
THD (20-20 kHz): 0.00035%
THD+N (1 kHz@-1dBFS): -107 dB
Channel Crosstalk (1 kHz): -122.5 dB
Max Phase Deviation: +7- 20Hz, +16- 22kHz
Input Impedance (balanced): 20 kOhm
Output Impedance (balanced): 50 Ohm
Maximum output level: +17 dBu

Latency

Natural Phase mode: 1.4 ms
Linear Phase mode: 42 ms

Power

Powered by included Power Supply Unit
Dimensions

Size: 14.4cm / 5.6" x 12cm / 4.72" x 4.5cm / 1.77"
Weight: 465g / 1,03lb

Package includes

ARC Studio room-correction processor
ARC Measurement Microphone (depending on the version)
ARC Measurement Microphone Clamp (depending on the version)
USB C-Type to USB A-Type cable (1.5 m / 4.92')
Power Supply Unit
Registration card

System Requirements

Macr (64-bits)
Minimal: Apple M1 or Intelr Core i5 Processor, 4 GB of RAM, macOSr 10.15 or newer (macOS 11 or newer required for Apple Silicon Processors).
Supported Plug-in formats: Audio Units, VST 2, VST 3, AAX.
Works with any audio interface with a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1 kHz or 48 kHz sampling rate is required for the measurement process.
One free USB port required.

Windowsr (64-bits)

Minimal: Intelr Core i5 Processor or equivalent, 4 GB of RAM, Windows 10 (64 bit) or newer.
Supported Plug-in formats: VST 2, VST 3, AAX.
Works with any audio interface with ASIO drivers, a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1kHz or 48kHz sampling rate is required for the measurement process.
One free USB port required.

Requires an OpenGL 2 compatible graphics adapter.

Notes: YouTubers, mobile journalists, and other content creators know the importance of great-sounding audio to stand out from the crowd. However, if you capture or stream using an iPad, iPhone or Android device, it's not always easy - especially on the go. We've all watched videos where the audio was compromised by background noise, wind or just annoying echoes.

Luckily, you no longer need to struggle to record crisp, clear audio on-the-go or on a budget. The iRig Mic Cast 2 is an affordable, pocket-sized microphone that easily attaches to your device and lets you sound your best anywhere, any time.

Capture noise-free audio:

iRig Mic Cast 2 is a tiny mic with big sound. The sequel to IK Multimedia's innovative iRig Mic Cast, it lets you record crystal clear speech anywhere using your iPhone, iPad or Android device. A new dual-capsule design lets you select front or rear pick-up patterns to reject off-axis noise whether you're recording yourself or someone else. You can also select both at once, for an omnidirectional pattern that's ideal for recording interviews and Q&As.

Ready when you are:

Weighing in at just a few ounces, this featherweight mic mounts securely onto your iPad or smartphone. Its innovative magnetic design lets you easily snap it right into place on your device in seconds (even with a case), for set-and-forget convenience. An included breakout cable also lets you use iRig Mic Cast 2 in both portrait or landscape orientation on phones and tablets.

Works with all your favourite apps:

iRig Mic Cast 2 works with any app that records audio, so you can shoot YouTube videos, Instagram live-streams, or even use it for Skype and FaceTime calls. The built-in headphone out can be used to listen to the signal in real-time to be sure you're capturing great audio. It's ideal for newer smartphone models without a headphone jack.

To get you started right out of the box, iRig Mic Cast 2 comes with iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high quality audio and video. Record, trim, edit and share, right from your device.

Travels anywhere:

No matter where your travels take you, iRig Mic Cast 2 is ready to come along for the ride. Its backpack portability makes it an ideal travel companion, and an included windscreen ensures high recording quality when outdoors. Best of all, there's no batteries required!

iRig Mic Cast 2 is the affordable, pocket-sized solution for all your audio needs. Get heard, get shared and get followed with audio that stands out from the crowd.

Includes:

- iRig Mic Cast 2 microphone
- TRRS 1/8" jack connection cable (20cm/7.87")
- Windshield
- 2x ferromagnetic plates

Notes: You're a visionary videographer, an intrepid journalist, a dedicated podcaster. And when you're out in the field, you want to be able to record high-quality audio for your projects with the hands-free convenience of a lavalier microphone, and you want to do it without breaking the bank.

That's where iRig Mic Lav comes in, it's an ultra-affordable and compact professional-quality mobile lavalier microphone for iPhone, iPad, iPod touch and Android.

iRig Mic Lav is chainable. That means it can double your recording power by letting you easily chain up to two iRig Mic Lav's to the same device. Each iRig Mic Lav captures high-quality audio thanks to its omnidirectioinal condenser capsule and foam pop shield. And recording convenience is taken to the next level thanks to its on-board headphone monitoring output, secure mounting clip, generous cable length and durable roadworthy design. And best of all, you can have all these premium features at a price as small as the device itself.

Portable performance:
iRig Mic Lav gives you the power to record great sounding audio anytime and anywhere. Designed to meet the exacting demands of broadcast professionals, its omnidirectional condenser capsule lets you capture a 30Hz - 16kHz frequency range of crystal-clear audio from all directions. It comes with a foam pop filter to eliminate vocal plosives, wind noises and other unwanted sounds. And like all good lavalier microphones, it comes with a durable mounting clip that you can easy mount on a t-shirt, lapel or other material for dependable and secure hands-free recording. Just clip it on, and you'll be ready to go.

Effortless monitoring:
Capturing great audio in the field requires more than just superior microphone technology. To get the best sound, you have to be able to monitor your source as its being recorded. Not all lavalier microphones come with on-board monitoring, but iRig Mic Lav does. In fact, among major brands, it's the first mobile lavalier microphone to offer this feature.

It comes with a combo 1/8" TRRS port that can be used to output audio to your favorite pair of headphones. Just set the toggle switch next to the port to "monitor" and plug in your headphones, and you'll be on your way to recording effortlessly amazing audio.

Chainable power:
There's a saying that goes something like, "two heads are better than one."

The same can be said for microphones - when you're out in the field, sometimes you need to record more than one person.

iRig Mic Lav lets you chain and record with up to two iRig Mic Lav's on the same device thanks to the same dual-purpose 1/8" TRRS port used for headphone monitoring.

Simply set the toggle switch to "input," and then plug a second iRig Mic Lav in to record with two microphones.

To monitor a dual iRig Mic Lav setup, you just need to set the switch on the second iRig Mic Lav's jack to 2monitor," and then you'll be able to plug in your headphones.

Go mobile:
You never know what mobile device you'll have accessible while you're out conducting that next heated interview or spontaneous Youtube video. This can be a problem if a microphone is specifically made for one type of device. Fortunately, you'll never have that problem when iRig Mic Lav is in your pocket. It outputs its sound via an analog 1/8" TRRS output jack, and it captures the same high-quality audio no matter whether it's plugged into an iPhone or an Android device with a compatible TRRS input jack compliant with the CTIA/AHJ wiring standard.

In other words, with iRig Mic Lav you can make quality recordings anytime, anywhere and on any mobile device.

Presenting with Power:
Pair iRig Mic Lav with VocaLive or EZ Voice and an iLoud portable speaker, and you'll have the perfect "hands-free" portable PA system that you can easily fit in a briefcase or backpack for trade shows, small group gatherings and other mobile presentations.

Powered up with apps:
With iRig Mic Lav, you're ready to record right out of the box thanks to its powerful suite of included apps. You get iRig Recorder FREE for iPhone, iPad and iPod touch and Android, a straightforward audio capture app that is great for everything from recording journalistic interviews to making podcasts while on the go (and everything in between).

VocaLive is an expandable, powerful effects processor and multi-track recording app that's perfect for adding a creative touch to audio. EZ Voice for iPhone, iPad and Android is a streamlined and easy-to-use app loaded with vocal effects that make it easy to practice and record over any song stored in your device's music library.

Notes: You're a visionary videographer, an intrepid journalist, a dedicated podcaster. And when you're out in the field, you want to be able to record high-quality audio for your projects with the hands-free convenience of a lavalier microphone, and you want to do it without breaking the bank.

That's where iRig Mic Lav comes in, it's an ultra-affordable and compact professional-quality mobile lavalier microphone for iPhone, iPad, iPod touch and Android.

iRig Mic Lav is chainable. That means it can double your recording power by letting you easily chain up to two iRig Mic Lav's to the same device. Each iRig Mic Lav captures high-quality audio thanks to its omnidirectional condenser capsule and foam pop shield. And recording convenience is taken to the next level thanks to its on-board headphone monitoring output, secure mounting clip, generous cable length and durable roadworthy design. And best of all, you can have all these premium features at a price as small as the device itself.

iRig Mic Lav gives you the power to record great sounding audio anytime and anywhere. Designed to meet the exacting demands of broadcast professionals, its omnidirectional condenser capsule lets you capture a 30Hz - 16kHz frequency range of crystal-clear audio from all directions. It comes with a foam pop filter to eliminate vocal plosives, wind noises and other unwanted sounds. And like all good lavalier microphones, it comes with a durable mounting clip that you can easy mount on a t-shirt, lapel or other material for dependable and secure hands-free recording. Just clip it on, and you'll be ready to go.

Capturing great audio in the field requires more than just superior microphone technology. To get the best sound, you have to be able to monitor your source as its being recorded. Not all lavalier microphones come with on-board monitoring, but iRig Mic Lav does. In fact, among major brands, it's the first mobile lavalier microphone to offer this feature.

It comes with a combo 1/8" TRRS port that can be used to output audio to your favourite pair of headphones. Just set the toggle switch next to the port to "monitor" and plug in your headphones, and you'll be on your way to recording effortlessly amazing audio.

There's a saying that goes something like, "two heads are better than one."

The same can be said for microphones - when you're out in the field, sometimes you need to record more than one person.

iRig Mic Lav lets you chain and record with up to two iRig Mic Lav's on the same device thanks to the same dual-purpose 1/8" TRRS port used for headphone monitoring.

Simply set the toggle switch to "input," and then plug a second iRig Mic Lav in to record with two microphones.

To monitor a dual iRig Mic Lav setup, you just need to set the switch on the second iRig Mic Lav's jack to "monitor," and then you'll be able to plug in your headphones.

You never know what mobile device you'll have accessible while you're out conducting that next heated interview or spontaneous Youtube video. This can be a problem if a microphone is specifically made for one type of device. Fortunately, you'll never have that problem when iRig Mic Lav is in your pocket. It outputs its sound via an analog 1/8" TRRS output jack, and it captures the same high-quality audio no matter whether it's plugged into an iPhone or an Android device with a compatible TRRS input jack compliant with the CTIA/AHJ wiring standard.

In other words, with iRig Mic Lav you can make quality recordings anytime, anywhere and on any mobile device.

Pair iRig Mic Lav with VocaLive or EZ Voice and an iLoud portable speaker, and you'll have the perfect "hands-free" portable PA system that you can easily fit in a briefcase or backpack for trade shows, small group gatherings and other mobile presentations.

With iRig Mic Lav, you're ready to record right out of the box thanks to its powerful suite of included apps. You get iRig Recorder FREE for iPhone, iPad and iPod touch and Android, a straightforward audio capture app that is great for everything from recording journalistic interviews to making podcasts while on the go (and everything in between).

VocaLive is an expandable, powerful effects processor and multi-track recording app that's perfect for adding a creative touch to audio. EZ Voice for iPhone, iPad and Android is a streamlined and easy-to-use app loaded with vocal effects that make it easy to practice and record over any song stored in your device's music library.

Notes: Introducing iRig Mic Studio, IK Multimedia's ultra-portable large-diaphragm digital condenser microphone for iPhone, iPad, iPod touch, Mac, PC and Android. It packs a 1" diameter condenser capsule into an ultra-compact enclosure that can be used to make professional-quality recordings anywhere. Great for musicians, vocalists, home producers, podcasters, broadcasters, voice-over artists and more, it puts the superior power of a large-diaphragm microphone into the palm of your hand.

What's remarkable about iRig Mic Studio is that it offers its truly amazing recording quality in an enclosure that's smaller than an iPhone. It features a large 1" diameter back electret condenser capsule, a 24-bit audiophile-grade A/D converter (with 44.1/48 kHz sample rate) and a built-in low-noise high-definition preamp. These, combined with its 133dB SPL rating, allow for optimal recording at any sound pressure level - it can capture everything from the subtle and nuanced dynamics of the human voice to the full-on bombast of an amplified electric guitar, and everything in between.

To ensure you'll always record at your best, iRig Mic Studio comes with a full set of flexible controls: It has a gain control knob and a multicolor LED level indicator. It also includes a headphone output with its own level control for onboard monitoring directly from iRig Mic Studio itself. And, for better positioning while recording, iRig Mic Studio comes with a sturdy and portable tabletop tripod stand.

All this is to say that iRig Mic Studio is equipped with everything you need to capture the highest quality sound no matter whether you're at home in the studio or recording while on the go.

iRig Mic Studio is compatible with all your favorite mobile and desktop platforms. It comes with a female micro-USB port and an assortment of cables: Micro-USB to Lightning for iPhone, iPad and iPod touch; micro-USB to micro-USB OTG for Android (requires either an Android 5 or Samsung Professional Audio device); and micro-USB to USB for Mac and PC. A micro-USB to 30-pin cable is available separately for older iPhone, iPad and iPod touch models.

For immediate recording, iRig Mic Studio comes equipped with a powerful suite of vocal apps that match its cross-platform compatibility. iPhone, iPad and iPod touch users will be able to enjoy VocaLive, a powerful effects processor and multi-track recording app that features a selection of 12 professional real-time vocal effects. EZ Voice for iPhone, iPad and iPod touch and EZ Voice for Android are streamlined and easy-to-use sing-along apps that make it easy for vocalists to practice with any song in their music library. iRig Recorder for iPhone, iPad and iPod touch and iRig Recorder for Android are straightforward apps for field recording, podcasting, note taking and more.

iRig Mic Studio is also fully compatible with a wide variety of third party apps and software, like Cubasis, ProStudio Vocal FX, MultiTrack DAW and more. It's also compatible with Apple's GarageBand and Logic Pro X apps, and iOS Voice Memo.

Notes: From news-worthy broadcasts to ensemble performances and everything in between, your videos will take centre stage with iRig Mic Video. Capture crystal clear audio for video with this noise-rejecting digital shotgun microphone and stand out from the crowd with serious production quality.

Compatible with the widest range of devices - smartphones, tablets and DSLR cameras - iRig Mic Video has you covered no matter where or how you create videos. And with multiple mounting options, iRig Mic Video can take you from one scene to another at a moment's notice.

Equipped with professional features for high quality audio capture, adjustable monitoring options, and features for flexible outdoor use, iRig Mic Video will take the worry out of recording great audio every time.

Say goodbye to unwanted noise:

iRig Mic Video makes it effortless to capture clear, high-quality audio. It features a gold-sputtered condenser capsule with a tight, directional pickup that focuses directly on the subject in front of you and rejects distracting background noise and surrounding sounds. Enjoy a quiet, clean signal thanks to 24-bit, 96 kHz converters. iRig Mic Video is also the first shotgun-style mic for smartphones to offer adjustable gain. And for outdoor use, simply pop on the included windscreen.

Any device, anywhere:

Whether your go-to video device is a smartphone, tablet, professional DSRL camera or a combination, you'll never miss that perfect shot. iRig Mic Video features a magnetic mount that quickly snaps onto your mobile device, even with a case, and includes a hot shoe adaptor to easily mount to many DSRLs. With the included Lightning, Micro-USB, USB-C and DSRL cables, you'll be ready wherever your day leads, so you can switch from a serious studio setup to ultra-mobile outdoor rig without missing a beat.

Sound your best:

To ensure you're always recording great audio, a multi-colour LED lets you conveniently and discretely check signal level at a glance, and the headphone out lets you monitor directly in real-time, or listen back to processed audio, so it fits into your workflow flawlessly.

Unlimited options:

iRig Mic Video works with any app that records audio, from the built-in camera app to the most high-end video capture solutions. To get you started right out of the box, iRig Mic Video includes iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high quality audio and video app. Record, trim, edit and share, right from your device.

With the iRig Mic Video and its innovative features at your fingertips, you'll always lead the charge with great-sounding audio.

An all-in-one, run-and-gun solution:

Looking for a small but comprehensive video rig? Check out the iRig Mic Video Bundle, combining iRig Mic Video and iKlip Grip Pro, IK's multi-function smartphone and camera stand. With an elegant, ergonomic design that transforms from handgrip to monopod to tripod in seconds, iKlip Grip Pro is the ideal way to securely position your smartphone - and a standard UNC 1/4" thread lets you mount iRig Mic Video, lights or other accessories on top. It's everything you need to capture pro-level video in any situation, in a lightweight and portable rig.

Includes:

- iRig Mic Video microphone
- Lightning to micro-USB connection cable (16cm/6.3")
- USB C-Type to micro-USB connection cable (30cm/11.81")
- Micro-USB OTG-Type to micro-USB connection cable (16cm/6.3")
- TRS 1/8" jack connection cable for digital cameras
- Hot shoe mount for digital cameras
- Windshield
- 2x ferromagnetic plates

Notes: Next-gen version of the popular iRig Pro Duo offers versatile recording options in a compact, portable package. Two mic/line inputs with phantom power, stereo line outputs, headphone out and MIDI in/out.

Supplier's notes:
IK Multimedia introduces the iRigr Pro Duo I/O, an enhanced, ultra-compact 2-channel audio/MIDI interface that enables high-quality recording on the go with iPhone, iPad, Android devices and Mac/PC. Designed for musicians, podcasters and other content creators, it can accommodate a variety of input sources including microphones, MIDI controllers, line-level and high-impedance instruments such as guitars, basses and keyboards, and more. It can also be used as a MIDI interface.

A sequel to IK's acclaimed iRig Pro Duo, the new iRig Pro Duo I/O features updated mic preamps with increased gain, as well as the addition of a USB-C cable to work with all of today's latest devices and new, dedicated PC drivers to ensure optimal performance on laptops and Surface tablets. In addition, refined volume controls with level indicators for more convenient workflow and a new rubberised finish to better stand up to the road, offer the same standard of quality customers have enjoyed from IK's award-winning iRig Pro I/O single-channel interface.

Recording capabilities
Two analogue combo inputs (1/4" / XLR) are provided for connecting and simultaneously recording any combination of dynamic and condenser microphones and instruments (line level or Hi-Z). They are complemented by Class-A preamps, adjustable gain and 48V phantom power. Each channel has its own input gain control for dialling in the perfect amount of input signal for a particular recording.

iRig Pro Duo I/O can also be used as a MIDI interface via MIDI input and output connectors and included breakout cables. Additional connections include two balanced 14" outputs and headphone output.

A direct monitor switch provides latency-free monitoring of direct incoming signal for use with video or streaming apps, or lets users monitor the processed signal returning from their device when recording music or using audio processing apps.

Out-of-the-box performance
iRig Pro Duo I/O runs on USB bus power or 2 AA batteries (or an optional PSU), and includes Lightning, USB-A and USB-C cables to work with any device right out of the box.

Although compatible with any app designed for high-quality digital audio input for recording or creation, iRig Pro Duo I/O comes with free access to over $/€500 of IK software, apps, and in-app material, making it an all-in-one package with everything needed to record, edit, and share great music, podcasts, interviews and more.

About the iRig series
Celebrating its 10th anniversary in 2020, IK's iRig series of interfaces helped define the mobile music-making category. With products designed for guitarists, vocalists, broadcasters and social media journalists, the series makes high quality audio recording accessible to everyone at an affordable price.

Notes: Connect more with the world- The original iRig Stream offered groundbreaking features that made it an overnight must-have for millions of creators. Now iRig Stream Pro takes your podcasting and streaming to an all-new level.

This 24-bit, 96 kHz audio interface for iPhone, iPad, Android and Mac/PC offers an XLR mic preamp, stereo RCA, TRRS and device inputs (loopback) - plus advanced routing, convenient controls and total portability.

It's everything you need for professional quality streaming, right in the palm of your hand.

Mix and stream up to 4 audio sources- iRig Stream Pro makes it easy to connect all your audio sources and route them to a streaming or recording app. Connect your favorite studio microphone or guitar via the XLR / 1/4" combo jack, mix in DJ decks or a keyboard via the stereo RCA inputs, then connect your earbuds to listen back and for a bonus mic/line input. You can even route in the output of your smartphone, tablet or laptop and sing or jam along.

XLR / 1/4" combo input

This input offers a pristine mic preamp with true +48V phantom power to connect studio microphones with stunning sound, switching to Hi-Z for your favorite guitar or bass.

RCA stereo input

Connect a mixer, DJ decks, keyboards and more with this low-noise stereo input.

3.5mm TRRS input/headphone output

A unique headphone/microphone jack is wired just like your smartphone so you can listen and talk over the stereo input simultaneously. It works with most headphones with a built-in mic and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre 2, giving you a wide range of options for any situation.

Device Loopback

This option routes the audio output of your digital device (iPhone, iPad, Android, Mac or PC) back into iRig Stream Pro to be mixed in with the other audio signals. This is perfect to jam or sing along with backing tracks, or process audio on one app and stream to another, all on a single device.

Each input has its own independent volume control and is then mixed down to your choice of stereo or 4 channels to stream, process or record into all your favourite apps.

Stereo or multichannel? You get both!

iRig Stream Pro offers 2 modes: stereo or multichannel. By default, iRig Stream Pro operates in stereo mode and pre-mixes multiple sources of audio (RCA stereo inputs (+ Loopback), XLR / 1/4" combo input and TRRS microphone) down to a stereo track, which is sent to your choice of streaming apps like Instagram, Facebook, Twitch, etc.

Switching to multichannel mode, the combo and TRRS inputs are routed to channels 3 and 4 respectively giving you 4 channels of audio to send to recording apps such as GarageBand or your favourite DAW.

Specs

Type: 2 in/2out or 4 in/2out
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Power: USB bus powered. 48V operations with iOS devices require battery or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device.
Metering: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input.
Device Connection: mini-DIN
Dimensions: 123 mm/4.84" x 67 mm/2.63" x 40 mm/1.57"
Weight: 146g
Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10 dBV
Head Room: 10 dB - Level @ max
Input Impedance: 16.5k Ohms
Frequency Response: from 20 Hz to 20 kHz (-1.5 dB)

Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 3.8 mV RMS to 388 mV RMS
Microphone Input Impedance: approx 2 kOhms
Analog Gain Range: 40 dB
Phantom Power: +48 V i 4 V
Frequency Response:
from 20 Hz to 20 kHz (-1 dB) Gain @ min
from 20 Hz to 20 kHz (-3 dB) Gain @ max

Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 70 mV RMS to 1.8 V RMS
Instrument Input Impedance: 1M Ohms
Analog Gain Range: 28 dB
Frequency Response: from 20 Hz to 20 kHz (-1 dB) Gain @ min, from 20 Hz to 20 kHz (-3 dB) Gain @ max

Headset/Phones
Connector: 1/8" TRRS jack (CTIA wiring standard)
Supply voltage: > 2,5 V
Microphone gain: Adjustable with numbered thumbwheel
Frequency Response: 20 Hz - 20 kHz
Headphone Level control: numbered thumbwheel

Battery Life
Phantom power On with iOS device: up to 20 hours (Alkaline batteries), with mic input connected to 3.1 mA phantom powered load
Note: all measurements made with Stream Level knob at 0dB.

Package includes
iRig Stream Pro interface
Lightning to mini-DIN connection cable with charging features (60cm/23.62")
USB C-Type to mini-DIN connection cable (60cm/23.62")
USB A-Type to mini-DIN connection cable (60cm/23.62")
2x 1.5V AA battery
Velcro strip

Notes: The ultimate real analog synth for everyone.

UNO Synth is the ultimate portable, monophonic, true analog synthesizer and IK Multimedia's entry in the hardware synthesiser world.

IK Multimedia combined two decades of experience in software and hardware development with the expertise of Italian boutique synth-maker Soundmachines and IK's synth guru, Erik Norlander (one of the brains behind acclaimed synths like the Alesis Andromeda). The result is a no-compromise instrument with massive analog sound that's also easy to use with hands-on programmability and advanced features at an unbeatable price.

The days of compromise are over. Now everyone can own a real analog synth with professional sound.

And UNO Synth is proudly made in IK's own Italian manufacturing facility to ensure the highest quality standards. Like the majority of IK hardware products, UNO Synth is built using a combination of IK's state-of-the-art, automated mounting machines and test systems and fine, renowned Italian craftsmanship.

Seasoned synth professionals and beginners alike will love UNO Synth's high-quality, pure analog audio path and its ultra-compact form factor. With both classic and modern synth sounds instantly at hand, UNO will put a smile on the face of synth fans of every musical genre. All this in a synth module that can be easily carried anywhere.

Electronic music lovers or first-time synth users will get instant satisfaction from this affordable, easy-to-use instrument even if they are new to analog synths or synth programming. Thanks to its onboard presets and easy-to-play keyboard with selectable scales and arpeggiator, UNO Synth is the perfect gateway into the synthesizer world.

The highly flexible synthesis engine not only excels in producing the rich, warm, punchy, deep bass sounds that are the core of a high-quality monophonic synth, it's also perfectly designed to bring a wide sonic palette of leads, drones, arps, sequences, sweeps and effects.

While UNO Synth is monophonic nature, its two independent oscillators can be tuned differently to also generate interesting pad-like interval sounds as well as octaves. Pulse width modulation of each oscillator provides the ability for a single oscillator to sound like two while the second oscillator can be tuned to an octave or interval for advanced modular-style timbres from the greatest classic synths.

Ease-of-use with powerful programming:

UNO Synth comes with 100 grab-and-go presets (80 fully rewritable), making it ready to play right out of the box. Each preset not only includes the sound programming, it also includes an associated arpeggio and sequence for even greater musical expression and portable sonic power.

This makes it easy for everyone to find the perfect sound, and beginners and professional producers alike will have great inspirational starting points to make working with the UNO Synth faster, more productive and more enjoyable.

Ultra-portable, battery-powered, to make music everywhere:

UNO Synth's ultra-compact dimensions make it among the smallest monophonic synth available. With its light weight (only 400g) and its battery-power supply (4xAA included) or USB power-supply (for battery power banks), UNO Synth gives musicians of all kinds the freedom to make music everywhere without being tied to a location! Fully untethered, it's the ideal analog synth to carry around all the time.

Use it standalone, live with your keyboard or with your DAW:

Electronic music lovers or DJs can make music with UNO Synth whenever and wherever the inspiration strikes. The built-in audio input also allows for daisy chaining other external audio device (like drum machines) so they can be used together with UNO Synth without the need for an additional mixer, keeping the set up at minimum for the greatest portability.

Notes: Blank panel for Intellijel 1U spaces. Made from high quality brushed aluminium that matches the 1U modules.

These can also be used for DIY purposes if you drill/mill them to fit your own custom circuits.

Comes with 2 screws.

Notes: The new, 2nd generation Audio Jacks Board comes pre-installed in every Intellijel 7U case manufactured since early 2019. Because this board is more fully featured than the previous generation, it's available as a stand-alone component for anyone who wishes to update an older 7U case.

You can tell which board you have by looking at the connectors. The new Audio Jacks Board has a large shrouded header flanked by two smaller shrouded headers, flanked by two link connectors at either end. Older boards have only one connector along the bottom edge.

The board holds four Neutrik TRS jacks, each of which can be configured as either an input or an output depending on the modules you connect. This allows you maximum flexibility when configuring your case - whether you wish to use the audio jacks as outputs, inputs, sends & returns; or some combination of these.

The jacks carry different audio signals depending on what you connect to the Audio Jacks Board. Please refer to the manual for more details on the many options available.

Notes: The Voltage Controlled Amplifier or "VCA" is one of the most essential and useful building blocks in a synthesis patch. The DUAL VCA 1U packs two high quality, DC coupled, linear VCAs into a very compact 1U package.

The two VCAs can be used completely independently or in tandem via the handy signal normalling. The DC coupling means that the VCA can be used for the amplitude control of both control voltages (CV) and audio signals.

Some application/use examples:

- Dual, independent VCA for dynamic level control of two different audio or cv sources
- Stereo VCA (use the CV normalling where CV A normals to CV B) for processing stereo sources or CV pairs.
- CV/Audio summing (when Out A is not patched, it normals to sum with OUT B, CV A and B control the independent levels)
- Voltage/signal doubling (use input A only and the doubled voltage will appear at OUT B when a CV of +5V applied to CV A)

Notes: Mixup is a versatile, expandable audio mixer for Eurorack format. It has eight inputs (6 on the front panel) and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.

Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.

Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for 'pops' when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.

Notes: Noise Random Tools comprises a collection of useful utility blocks that you could use in many of your patches - Clock, Random Pulse, Analog Noise, Sample and Hold, and Slew.

Features:

- Clock and Random pulse source with adjustable rate
- Analog pink and white noise source with very accurate spectrum
- Analog sample / track and hold with very low droop
- Analog slew with adjustable slew rate

Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.

Notes: This module has 1/8" jacks to accept either mono or stereo audio signals from your modular gear.

It features input level indicator LEDs, and contains all the gain control circuitry necessary to drive external audio gear at the proper levels.

A ribbon cable is included for connecting it to either the Stereo Out Jacks 1U module, or a compatible Intellijel case with 1/4" jacks (e.g. 7U x 104HP, 7U x 84HP, or Palette 62).

Notes: Tangrams

Push (or Pulse) the Envelope

Snappy, classically analogue envelopes with visually intuitive controls. Add a powerful, cv controllable cyclical gate generator, integrated VCA, and trigger buttons -then double it-now you've got Tangrams.

Tangrams, like the Dual ADSR before it, is a dual analogue core-envelope inspired by the Roland SH-101 / System 100m design with several enhancements. Taking further inspiration from trapezoidal function generators like the one on the EMS Synthi, Intellijel have added a voltage-controlled pulser circuit to link the triggering of two envelopes - allowing for delayed one-shots, cycling organic envelopes, and more. In addition, Intellijel added two VCAs for level control of each envelope, or alternatively, direct injection of the signal you'd like to envelope - freeing up your other VCAs.

The Pulser

The Pulser can be thought of as a way to set both a gate ON time (T1) and an OFF time (T2). In this way, you could configure a cycling ADSR that has a gate time that is different from the interval between gates. Alternatively, you can create a sequence where ADSR2 is triggered by a delayed amount of time after ADSR1 is triggered (either cyclically or in a single shot sequence). The panel switches for routing or disabling the pulse sources allow for even more complex combinations of control beyond these examples. This special combination of functions can yield a plethora of interesting and organic envelope and gate patterns to be created; cyclical and single shot.

ADSR + VCA Features

Dual Analogue ADSR envelopes with digital gate Pulser for trapezoid shapes
Pulser stages P1 and P2 can be selectively routed to trigger each ADSR via panel switches
Three timing ranges: (FAST: ~5 seconds, MED: ~35sec, SLOW: ~1min A/D times)
Retrig input (allows re-triggering of the envelope if source gate held high)
VCA input can be used to dynamically control the respective ADSR output level (bipolar) or to process signals to be modulated in amplitude by the ADSR.
Manual GATE buttons for each envelope

Pulser Features

A pulse is made of individually controllable T1 and T2 stage lengths
CV control over T1 and T2 time
Pulser can be one-shot (SINGLE) or repeating (CYCLE)
PULSE output has a switch to select P1 or P2 as the source.
Pulser stages P1 and P2 can be selectively routed to trigger each ADSR via panel switches
START trigger input for starting/restarting the Pulser sequence
Manual GATE button to trigger the Pulser sequence

Size: 14HP
Depth: 35mm
Power: 66mA @ +12V 49mA @ -12V

Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.

Notes: Mighty oscillations, mini size.

An analog oscillator and LFO with pure waveforms and precise tracking in a compact package. Perfect as a utility modulation source but equally capable to be used as a primary sound source. Patch it up and let it rip!

Features
Four simultaneous pure waveforms: Sine, Triangle, Square and Sawtooth
Pitch input for 1V/Oct tracking and FM
SYNC input for Hard Sync. This input has a comparator so that you can use a variety of waveforms as triggers.
Switch to select VCO (audio) or LFO range of operation
Three position Octave switch to jump pitch up or down by two octaves
PITCH knob has three octave range in VCO mode (extended to seven with the octave switch) and seven octave range in LFO mode (extended to 11 with the octave switch).
Bicolor led indicates the state of the triangle core rate

Specs
Width 14HP
Depth 37.5mm
Power 19mA @ +12V
16mA @ -12V

Notes: Convenient Connections

Use this module to tap into the 3-pin LINK connector used in several Intellijel products, including Mixup, Pedal I/O and the Palette and 2nd Generation Audio Jacks Board in a 7U case.

The XY I/O uses two 3.5mm TRS jacks, which accept insert cables to provide send/return capability to a pair of Pedal I/O's, or additional stereo inputs (or outputs) to a pair of Mixups, or one of each.

A third 3-pin Link connector on the back panel allows the X and Y jacks to access the L/R (or Send/Return) jacks on a single connected module or case without needing a stereo cable.

Width: 4HP
Depth: 24mm

Notes: The MBase11 can do only one thing, but it does it right, and it does this even better than in the past.

The MBase11 is the logical follower of the MBase01 and offers even better performance, more versatility and an even phatter sound. It generates analog bass drums, from extremely powerful to soft and covers the whole range from 909-style to 808-fashioned. And also, the LFO has 8 different waveforms including true sine that can be used to create very different envelopes. The resulting sounds are not simply kicks, this turns out to be a bass drum synthesizer.

The MBase11 has a compression parameter to vary the thickness of decaying sound. It offers a variable gate time to to create very different sounding attacks. It also has a metalise parameter to have hundreds of variations on the attack noise.

For more intuitive editing, JoMox have added an analog potentiometer that works alternatively to the parameter editing when scrolling the data wheel is too hard.

The MBase11 purposefully sounds a bit different to the XBASE 999/888, making it a great sounding expansion for our other drum products and other analog percussion.

The kick sets in very precisely and the attack sounds very snappy at all kinds of sound variations.

The MBase11 can also be used as a real bass with some limitations. If decay is cranked up it is long enough for tones and the pitch can be played on the keyboard in semitones over three octaves.

The kick drum can be triggered by an external analog trigger input. This is especially useful for live drummers who want to thicken up their live drum kit. The trigger input works with regular piezo pickups or audio signals.

Last but not least: one of the most convincing arguments for the MBase11 is the price: This is an inexpensive tool that helps you to create great kick sounds, without the time-consuming searching associated with mostly not satisfying samples. You save time and energy while reaching the sound quality you always imagined.

Tweak the sound you need. Everything is real.

Notes: The Keith McMillen Instruments CV Cable Kit is designed for converting MIDI messages to control voltages. The kit makes it possible to connect a QuNexus USB MIDI controller to external hardware that accepts a CV voltage such as an analog synthesizer. The kit consists of one right angle 1/8" stereo to 1/4" stereo interconnect cable, one 1/8" stereo to 1/4" mono interconnect cable, one 1/8" TRRS to dual 1/8" stereo interconnect cable, and two 1/8" stereo to dual 1/8" mono interconnect cables.

In the box:
- Keith McMillen Instruments CV Cable Kit
- Right Angle 1/8" Stereo to 1/4" Stereo Interconnect Cable
- 1/8" Stereo to 1/4" Mono Interconnect Cable
- 1/8" TRRS to Dual 1/8" Stereo Interconnect Cable
- 2 x 1/8" Stereo to Dual 1/8" Mono Interconnect Cables
- Limited 1-Year Warranty

Notes: Digitally-controlled full-analogue path Granular + Multimode VCF

The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analogue domain and goes through analogue circuits from in to out.

The digital processor does not convert or generate audio signals; it is there to control the analogue circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.

Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.

The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V
0 mA 5V

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A unique analogue take on granular synthesis, inspired by Yannis Xenakis, the Grainity pairs a granular filter with a multimode filter to create new textures and harmonics.

Supplier's Notes:
The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analog domain and goes through analog circuits from in to out.
The digital processor does not convert or generate audio signals; it is there to control the analog circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.
Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.
The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V

Notes: *** NO POWER SUPPLY INCLUDED - USES GENERIC 12VAC ADAPTER ***

Basically, the Ekdahl Moisturizer is a spring reverb where the springs are exposed so they can be played/hit/fiddled with. As well as being capable of creating sound in itself, you can of course also play sound through the springs like a regular spring reverb - this makes for happy-fun-time finger-modulation of the reverb on whatever audio that's going through it. On top of this there's an analog multimode filter that can be used to attenuate or exaggerate certain frequencies in the sound, this is real handy while playing the springs as you can - for instance - cut all the highs and just make thunderous doomy sounds or do the opposite; cut all the lows and make that ear piercing high frequency special love. Also, it incorporates an LFO that's internally routable to the filter and that also has some external routing-stuff. The Ekdahl Moisturizer has tons of CV / Expression pedal options on the back for even more hillarious moments. The Moisturizer is a mono unit.

The Moisturizer was developed with the help of Jason Willett (Half Japanese, Leperchaun Catering), Martin Schmidt (Matmos, Instant Coffee), Joshua Atkins (Polygons, Major Powers), mom & dad and many more.

The Ekdahl Moisturizer contains exactly:
Preamp (up to 10 times gain)
Reverb
Reverb / Preamp wet/dry crossfader (Knob & CV/EP controllable)
State variable filter with
Lowpass/Bandpass/Highpass seamless crossover (Knob, CV/EP & LFO controllable)
Cutoff (Knob, CV/EP & LFO controllable)
Resonance (WITHOUT resonance limiter)
LFO with
Speed control (Knob & CV/EP controllable)
Square / Triangle crossover
External output with output amplitude knob
Filter / No filter wet/dry crossfader (Knob & CV/EP controllable)

The preamp section is designed for a max of 10 times gain, this to accomodate for low level output instruments such as guitars etc. The reverb tank has normal reverb signal gain on it, meaning that if you hit the springs hard they'll distort like crap which is real nice, if you hit them softly the sound won't be distorted.

The filter in the Ekdahl Moisturizer is abrasive, the fact that it doesn't have any resonance limiting makes it possible to get the filter to sound *really* bubbly & metallic (way more then any filter i've ever heard), but it's also of course capable of sounding completely "normal" - it all depends on the amount of resonance and/or gain. The fact that you can seamlessly fade inbetween lowpass, bandpass or highpass filter (or lowpass+bandpass and highpass+bandpass) makes the unit pretty damn versatile and by using the wet/dry filter/no filter crossfader there's some neat shit that can be done too. Now it should be said that due to the fact that there's no resonance limiter, if using very high gain, with high resonance and turning the cutoff frequency very high the filter might cut out - not to worry, just turn the cutoff back a bit and the filter pops in again. This happens because the filter gets overloaded and can be avoided with a resonance limiter, however if i had one of those all the super-awesome bounce would be gone and it'd sound like all the other filter out there.

The Ekdahl moisturizer has six CV/Expression pedal related jacks on the back, one of them is a LFO output so you can control other shit with The Moisturizer's LFO. All the other jacks are inputs and takes either CV or Expression pedal, they are: Reverb Mixture, VCF Cutoff, VCF Filter Mode (LP/BP/HP), Filter Mixture and LFO Speed.

Notes: It's all about the things you connect to the The Field Kit! To get you started, Koma Elektronik have decided to offer an Expansion Pack with a bunch of different sources that you can use and connect to create your own signature sounds.

The Expansion Pack contains:

- 2 x Contact Microphones: Use these contact microphones to pick up vibration or sound, they are an amazing versatile input source
- 1 x Electro-Magnetic Pickup: This guy is good at picking up changes in magnetic fields, you can use it to amplify a string like a guitar pickup or amplify a spinning motor
- 1 x Solenoid push-pull motor: Use the solenoid to hit things, together with the DC Interface the solenoid can make anything rhythmical and percussive
- 1 x DC motor: The Motor can be used to rotate things or as a noisy oscillator together with the Electro-Magnetic Pickup
- 1 x small speaker: Use the speaker to listen to the main mix or as a sound source and to feedback sounds
- 3 x patch cables Always handy to have around to patch up different parts of your Field Kit... and a bunch of little objects to play with (little springs, marbles)

The new KOMA Elektronik Field Kit is the perfect tool for everyone who would like to experiment with electro acoustic sound. Use everyday objects, amplify them and use them to make sound, like our heroes John Cage and David Tudor used to do!

The Field Kit is optimized to process signals from microphones, contact microphones, electromagnetic pickups and able to run DC motors and solenoids. On top of that it can receive radio signals and convert signals from switches and sensors into control voltage!

Notes: This new device is a powerful new CV controlled effects unit for your electronic music setup and pairs extremely well with the KOMA Field Kit.

- Looper
- Frequency Shifter
- Sample Rate Reducer/Bitcrusher
- Digital Delay
- Analogue Spring Reverb
- 4 Channel VCA Mixer
- 4 Step Mini Sequencer
- Envelope Generator

All of this, combined with the new 4 Channel CV Interface which allows you to route four CV signals throughout the device, means an incredible control over sound and timbre and a great addition to your mobile performance rig.

The Field Kit FX is built up from 7 separate functional blocks all focused on mangling and changing incoming audio and CV signals. They are designed to operate together as a coherent addition to our Field Kit Electroacoustic Workstation or alternatively together with other pieces of music electronics with the ability to use control voltage signals.

Notes: Keep it all organized with the KOMA Kabelhanger! By placing your cables directly on a hanger as part of your case, they are always in arms' reach!

Use Koma's tourproof screws (sold separately) to go with your Kabelhanger and your case gets travel-ready in no time.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Second-gen version of the excellent Opsix features major updates including 64-voice polyphony and an improved interface. Same powerful six-operator FM synth engine.

Supplier's Notes:
A Full-Spectrum Sound Experience

Opsix mk II is a digital synth like no other. Based on the sound engine of the original Opsix, the number of simultaneous voices and voicings has been expanded to an astounding 64 voices. The result is superior performance and precise control.

The Opsix Operator Mixer simplified FM synthesis for the first time, making it not just comprehensible but also controllable. With the addition of extra synthesis capabilities and programming, it offered a more efficient workflow and an even richer sound.

And, it is fully compatible with the sounds and samples from both the original opsix and the opsix Native software, including numerous high-quality libraries.

Evolved to an astounding 64 voices

The Opsix mk II has 64 voices, twice as many as the original 32 voices, allowing users to enjoy tone editing without having to worry about the number of simultaneous voices. In addition, the operator-mixer section, the most distinctive feature of this product, has been accented with a new image colour, green.

Get Illuminated with the Operator Mixer

At the heart of every sound is Opsix mk II's Operator Mixer - a simple set of six faders and knobs that invite exploration. Each part lights up red to indicate carriers or blue for modulators. Manipulating them opens up new sound-shaping possibilities to breathe fresh life into your musical ideas. This straightforward, hands-on workflow is part of what makes Opsix mk II so unique, just like the sounds it offers.

Direct Hands-On Control

Whether you're tweaking a preset or building a patch from the ground up, the six data entry knobs on the right give you quick access to the parameters you need and seamlessly sync with the large OLED display, giving you a clear, focused direction to your workflow. Coupled with the mixer, it makes creating fresh sounds super easy and, most importantly, fun!

Select from a full range of analogue-style filters, from the radical Korg MS-20 low-pass/high-pass filter to the powerful yet smooth KORG Polysix low-pass filter that gives your sound a vintage feel. There are also two or four-pole low-pass, high-pass, band-pass, and band-reject filters with resonance.

There's even a built-in spectrum analyser and oscilloscope that gives you visual feedback via the screen on the music you're making.

Six in One Synthesis

The core of Opsix mk II is nothing short of exponential. Since waveforms can be arranged and modulated in nearly infinite ways, Opsix mk II can easily do the sonic work that is similar to numerous types of synthesis:

Subtractive

Removing parts of the sound to get the sound you want; the most widely-used synthesis. Opsix mk II uses up to six envelopes and multi-modelled filters to achieve many cutting-edge and classical analogue synthesis tones.

Semi-Modular

Rerouting signal paths to change the sound. A spin through the Algorithm section will dramatically reshape the sound by changing how the signal routing between the operators work together, and no patch cables are needed. Analog-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Analogue (Modeling)

Analogue-style controls and plenty of stackable waveforms take you from digital to analogue-sounding in no time. Enjoy deep basses, crisp leads, thick pad sounds, fuzzy brass tones, and so much more.

Waveshaping

Adding intentional distortion to the waveforms to achieve aggressive overtones that are either harmonic or inharmonic. This will help you achieve gritty, bitey tones dripping with character.

Additive

Stacking waveforms and blending their harmonics is key to an expansive range of harmonious, dissonant, and tension-driven sounds. With six operators available, the complete FM experience is possible, including the ability to go back in time for classic sounds you have heard throughout recording history.

Classic FM

Last but certainly not least, Opsix's highly flexible and powerful architecture starts with true six-Operator FM. As a result, it easily delivers signature sounds you have surely heard on thousands of hits from the '80s on through today, and with far more polyphony than other standalone FM synths available today.

With all of these ways to realize and explore sounds, Opsix mk II is uniquely suited as a "future-modern-classic" synth!

Altered Reality

What started as a legacy synthesis has evolved into something completely different. Opsix mk II is FM-based, but the similarities to the classic synthesis end there. The Altered FM architecture delivers sounds across a vast spectrum, far wider than any single synthesis has been able to cover before, thanks to new sound components; new waveforms, filters, shaping, effects, LFOs, envelopes, modulations, and more, all translating to its broad assortment of sounds.

Powerful Effects Processing

Opsix mk II provides three blocks of 30 types of high-definition effects that you can use together to enhance your sounds even further. There's everything from a great mix of usable standard effects like chorus, phaser, delay, and compressor to some world-class shimmering reverbs that will elevate your sound to the next level.

Specifications

Keyboard: 37 keys (velocity and release-velocity sensitive)
Sound generating system: Altered FM sound generator
Maximum Polyphony: 64 voices (varies depending on the setting)
Structure: 6 operators, 1 filter, 3 EGs, 3 LFOs, 3 effects, step sequencer, arpeggiator
Algorithm: 40 presets + user algorithm (unique to each program)
Operator: 6 modes (FM, Ring Mod., Filter, Filter FM, Wave Folder, Effect)
Oscillator waveform: 23 waveforms (Sine, Sine 12bit, Sine 8bit, Triangle, Saw, Saw HD, Square, Square HD, Additive Saw3, Additive Sqr3, Additive Tri3, Additive 12345, Additive 1+2, Additive 1+3, Additive 1+4, Additive 1+5, Additive 1+6, Additive 1+7, Additive 1+8, Noise S/H, Noise White, Noise Pink, Noise Blue)
Filter: 11 types (LPF 12, LPF 24, LPF MS-20, LPF POLY6, HPF 12, HPF 24, HPF MS-20, BPF 6, BPF 12, BRF 6, BRF 12)
EG: ADSR
LFO: 23 waveforms (Triangle, Saw Down, Saw Up, Square, Sine, Sample&Hold, Guitar, Exp. Triangle, Exp. Saw Down, Exp. Saw Up, Step4 Triangle, Step6 Triangle, Step4 Saw Down, Step6 Saw Down, StepRnd:Time, StepRnd:Lvl&Time, StepRnd:Level, Random:Time, Random:Lvl&Time, Triangle + , Saw Down + , Saw Up + , Square +)
V.Patch: 12 routings
Effect: 30 types (Chorus, Unison Ensemble, Phaser, Phaser (BPM) , Auto Pan, Auto Pan (BPM), Flanger, Flanger (BPM) , Rotary Speaker, Auto Wah, Exciter, Enhancer, LFO Filter, 3-Band EQ, Distortion, Guitar Amp, Decimator, Grain Shifter, Master Limiter, Compressor, Delay, Delay (BPM) , Autopan Dly, Autopan Dly (BPM), Tape Echo, Tape Echo (BPM) , Early Reflection, Reverb, Shimmer Reverb, Spring Reverb)
Sequencer: Step Sequencer (up to 16 steps, up to 6 notes per step), Motion Sequencer (up to 6 lanes)
Arpeggiator: 7 patterns (MANUAL, UP, DOWN, ALT1, ALT2, RANDOM, TRIGGER)
Number of programs: 500 (350 preset programs and 150 user programs as the factory-set default)
Favourite: 64 (16 Slots × 4 Banks)
Controllers: MODULATION wheel, PITCH wheel, RATIO OP 1-6 knobs, LEVEL OP 1-6 sliders, DATA ENTRY A-F knobs
Inputs/outputs: Headphone (6.3 mm stereo phone jack), OUTPUT L/MONO and R (impedance-balanced 6.3 mm TRS phone jacks), DAMPER (6.3 mm phone jack, half-damper not supported), MIDI IN and OUT connectors, USB B port
Power supply: AC adapter (DC12V)
Power consumption: 5 W
Dimensions (W × D × H): 565 × 338 × 90 mm / 22.24" × 13.31" × 3.54"
Weight: 2.9 kg / 6.93 lbs.
Included items: AC adapter
Accessories (sold separately): DS-1H damper pedal, PS-1 pedal switch, PS-3 pedal switch

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Updated version of Korg's excellent Wavestate, drawing on the iconic Wavestation synth to create a modern take on wavetable synthesis, now with added polyphony.

Supplier's Notes:
Wavestate mkII

Extended polyphony. Extended possibilities.

Korg's legendary Wavestation introduced the world to wave sequencing, and the 37-key Wavestate mkII builds on that legacy with a reimagined, compact synth designed to satisfy today's demanding musicians and producers. MkII expands polyphony to 96 stereo voices and adds a fresh look. It's completely compatible with sounds and samples for the original Wavestate.

Overview

Korg's legendary Wavestation introduced the world to Wave Sequencing, transforming raw samples into sounds that no-one had ever heard before. The flagship OASYS, Kronos and Nautilus keyboards developed Wave Sequencing even further, expanding on its unique palette of lush, evolving pads and driving rhythms.

Now, Korg is proud to present the new Wavestate mkII, with improved polyphony (96 stereo voices) and a fresh look. It's completely compatible with sounds and samples for both the original Wavestate, Wavestate SE and Wavestate Native software, including many excellent third-party libraries. Updated sounds and software keep it fresh and the compact form-factor, with 37 full-size keys, still transports easily and fits neatly into any stage, studio, or desktop setup.

Keyboard: 37-keys, velocity sensative
Sound generation: Wave Sequencing 2.0
Polyphony: 96 stereo voices
Configuration: Performance: 4 layers, reverb, EQ
Layers: Program, Arpeggiator, Key, and Velocity Zones
Programs: Wave Sequence, Filter, Amp, Pre FX, Mod FX, Delay
Presets: 261 Performances,799 Programs, and 1042 Wave Sequences
Controllers: MOD wheel, PITCH wheel, Vector Joystick, 8 x program/Performance Mod knobs.
Effects: Pre FX x4, Mod FX x4, Delay x4, Reverb, Performance EQ

Inputs/outputs:

Audio Outputs L/MONO, R (6.3mm TRS phone jack, impedance balanced)
Headphones (6.3mm stereo phone jack)
Damper (6.3mm phone jack)
MIDI in,out
USB Type B

Power: AC adapter (DC12V, 2500mA)
Power consumption 5w
Dimensions: 565 W x 338 (D x 92 (H mm
Weight: 2.9kg

Notes: LOCI Crate 30 is a 30hp case for small Eurorack configurations. Supplied with strong 3D printed LOCI Rails (inspired by vector rails) and stainless steel threaded strips. At just L49.99 RRP inc VAT it's an incredibly affordable route into the modular synth world.

Great for small Eurorack Modular setups.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.

Notes: The Dual Stereo Gate (DXG) music synthesizer module is a Dual Stereo Low Pass Gate and Mixer. It follows in the footsteps of the QMMG, Optomix, RxMx, DynaMix, and LxD. Unlike its predecessors, the DXG is specifically oriented around mixing stereo signals, making it an important addition to any system containing modules like XPO, QPAS, Morphagene, Mimeophon, and other stereo modules by Make Noise or others.

Unique to the DXG is a new low pass gate circuit that does not use vactrols. This circuit is 100% analogue and its response was arrived at after many months tailoring it to meet or exceed the expectations that have been set by all the vactrol low pass gates that Make Noise has created over the years.

In the past, Make Noise produced the Dynamix module and Dynamics circuit in the 0-COAST, both of which are vactrolless LPGs; however, the DXG is a completely new approach which better implements the gentle single pole filtering of a low pass gate, while also emulating the slow decay and memory of the vactrol based low pass gate. This new circuit makes possible the consistency of response necessary for versatile stereo use, while also keeping the module small and affordable so that it can be a key part of just about any modular system.

As on all of Make Noise's low pass gates, the DXG's Control parameter is used to set both the amplitude and the frequency content of the sound that passes through it. The control parameter tends to open faster than it closes, imparting a subtle decay phase onto any envelope shape that is used to modulate it.

Unlike previous low pass gates made by Make Noise, all the DXG's inputs and outputs are stereo. Each set of inputs is normalled so that the left input can be used for a mono signal, sending a copy to both left and right outputs. The Auxiliary inputs are also a stereo pair with mono normalization. These normalizations allow for the DXG to be used as a simple three channel stereo mixer, with one or two of the channels additionally being used for dynamics control and note event generation. The Aux inputs can be used to chain together larger decentralized mixes using additional DXG modules, or X-PAN, Optomix, modDemix etc.

Features

- Make Noise's first Stereo Low Pass Gate

- Vactrol-free design for classic Low Pass Gate sounds, but with the balance and consistency needed for true Stereo

- Fully Stereo i/o for easy integration into a Stereo-equipped modular synthesizer

- All Left inputs normalled for easy use with Mono signals

- STRIKE Input allows use of Gate signal to trigger Low Pass Gate circuit, creating "plucking" or "pinging" sound from any Gate

- Summing stage with Stereo AUXiliary IN allows for chaining of multiple units, creating larger mixes

- Part of a decentralized mix console integrated throughout the system along with X-PAN, Optomix, XOH, etc.

- Pairs well with XPO, QPAS, Morphagene, Mimeophon, Spectraphon etc.

Width: 8hp
Power:
74mA @ +12V
86mA @ -12V
Module Depth (incl power cable): 43mm

Notes: A true legend of modular synthesis, Make Noise's Maths is arguably the definitive Eurorack function generator. Based on analogue computing circuits, Maths draws on Buchla-style techniques to offer countless ways of generating and processing modulation signals.

Supplier's Notes:
The MATHS music synthesizer module is an analogue computer designed for musical purposes. Amongst other things, it will allow you to:

Features

Generate a variety of linear, logarithmic, or exponential triggered or continuous functions

Integrate an incoming signal

With no signal applied, generate a variety of linear, logarithmic, or exponential functions

Add, subtract and OR up to 4 signals

Generate analogue signals from digital information (Gate / Clock)

Generate digital information (Gate / Clock) from analog signals

Delay digital (Gate / Clock) information

If the above list reads like science rather than music, here is the translation:

Voltage Controlled Envelope or LFO as slow as 25 minutes and as fast as 1khz

Apply Lag, Slew or Portamento to control voltages

Change the depth of modulation and modulate backwards!

Combine up to 4 control signals to create more complex modulations

Musical Events such as Ramping up or Down in Tempo, on command

Initiating Musical events upon sensing motion in the system

Musical note division and / or Flam

Perfect for modulating the DPO and just about anything else

Specifications
Width: 20hp
Max Depth
(incl. power cable): 32mm

Power:
60mA@ +12V
50mA @ -12V

Notes: Cable Ties - 100Pcs

Strong plastic cable ties available in black or white and in a variety of sizes.

Material: Nylon
Temperature range: 40 to 85 degrees
Max. load: 181lbs