Back catalogue: Studio Equipment

Notes: Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!

Notes: Total Mixing Performance in a Small Package:

MIDImix is a portable compact high-performance mixer that has the unique ability to control your Digital Audio Workstation (DAW) with the press of a single button, giving all musicians and producers complete, uncomplicated mastery over mixing and processing of their digital music creations on the go.

Until now, you had to build and layer your mixes at the performance site first, then transfer that mix at a later time to your DAW for post-mix processing and manipulation. What a pain. This is not the way you'd like to do it, because of the time lag between constructing the initial mix and then not being able to work on it until later in your DAW. This meant you only had a limited ability to create the exact mix you wanted in real time.

The On-Site Mixing Problem Solved:

Akai Professional's portable MIDImix solves this problem completely. With Akai Professional's famous build quality and cutting-edge engineering, it combines a high-performance mixer with 8 individual line faders and a master fader, 24 control knobs arranged 3 per channel and 1 to 1 mapping with Ableton Live (Ableton Live Lite is included). You can send all the mixer's settings to their DAW with a single press of a button, for unprecedented management and precise control over your DAW's functionality. This is great - it means that you can mix and modify/manipulate your projects concurrently in real time, giving you a much wider array of creative options as a result of the far greater creative flexibility afforded by MIDImix.

Nothing Else Like It:

Up until now, there was just no solution for musicians and producers who needed a compact, easily portable way to mix and process their projects on site. But MIDImix is the best solution for portable mixing on the go. MIDImix offers an intuitive, familiar mixer layout, solid connectivity with the most popular DAWs, and legendary Akai Professional quality. MIDImix is exactly what you need to do great mixes and professional processing on site - at the same time.

Notes: Korg is always building new ways to experience hands-on, fun music-making. Now, you can too.

The Nu:Tekt NTS-1 digital KIT is a unique, flexible, and easy DIY synthesizer that you can easily assemble yourself, without any soldering (tool included!).

The first of its kind from KORG's DIY-focused Nu:Tekt brand, NTS-1 packs a powerful synth and multi-effects engine into a compact form factor that you can carry and connect anywhere. Its DIY nature means it's also very customizable. Explore the possibilities!

Included items: USB cable, owner's manual, screwdriver

Notes: Arturia MiniFuse 1 is a portable 1 in / 2 out audio interface audio interface designed to work for you, whatever your style. Record your vocals, guitar, podcast, or produce your track at the highest studio quality. A complete software bundle with instruments, recording software, and effects is included - recording and producing has never been easier.

MiniFuse comes from the award winning Arturia AudioFuse line of studio audio interfaces. Class-compliant & Bus-powered means you can plug in and go, and you won't need an additional power supply as it's USB powered. Recording has never been easier.

MiniFuse 1 fits right into your setup with a straightforward set of ins and outs. Its single combo input lets you easily connect either XLR or 1/4" jack cables. Plug into your computer with quick & compact USB-C compatibility. Finally, connect USB devices like your MIDI keyboard with the additional USB hub socket.

For audiophiles, MiniFuse boasts a 110db dynamic range and a class-leading equivalent input noise of -129dB. For everyone else, that means that every recording you make sounds incredible, with rich dynamics, clear noise-free signal, and studio-grade quality - you can't go wrong.

Break the mold and take your studio on the go. MiniFuse is not only compact and lightweight; its rugged aluminium casing can handle the mobile producer's lifestyle. Put it in your bag, get out there, and find the sound you've been looking for.

Whether you're using a laptop or desktop, MiniFuse can work for you. PC or Mac, connect it and enjoy total recording freedom. Better still, with the MiniFuse Control Center app, you can control its inputs, outputs, settings, and firmware updates in one place

Keep your creativity fresh and your inspiration flowing with step-by-step music production tutori-als, mixing hacks, and Ableton project templates designed by artists, producers, and beatmakers, featuring the software that's included with MiniFuse. Updated frequently, no subscription re-quired, and free with your MiniFuse. MiniFuse comes with an exclusive selection of software titles offering everything you need to give your sound the professional edge.

Arturia FX

Colour your sound with 4 premium FX plugin recreations of studio classics; a lush plate reverb, a gritty analogue preamp, a classic tape echo, and a rich stereo chorus.

Ableton Live Lite

Compose, record, perform, and produce anything with an introduction to one of the most widely-used musical software titles in the business - yours with MiniFuse.

Analog Lab Intro

Instantly add inspiring sounds from Arturia's award-winning keyboard emulations to your mix with hundreds of presets to explore, from vintage '80s synths to fat modern sounds.

Auto-Tune Unlimited 3-months free subscription

Refine your vocal parts for perfect harmony or go full trap-style autotune with a 3-month sub-scription to the industry's favorite voice tuning plugin.

GUITAR RIG 6 LE

An inspiring selection of amps, cabs, delays, reverbs, stompboxes and compressors, so you can build your own processing chains and customize your perfect guitar tones.

Splice Creator Plan

3-months free subscription Access millions of hi-def royalty-free samples and plugin presets, from lo-fi drum loops to punchy vocal one-shots, and add them to your personal collection for life.

Huge software bundle includes: Ableton Live Lite, Analog Lag Intro, 4 x Arturia FX, Auto-Tune 3-month subscription, GUITAR RIG 6 LE, Splice 3-month subscription, and more...

Included Software

Ableton Live Lite: For your recording and mixing needs

Analog Lab Intro: Classic and modern synthesizer and keyboard sounds

4 x Arturia FX: A world-class preamp, plate reverb, tape echo and chorus effects

Auto-Tune Unlimited: 3-month subscription to the leading pitch tuning software

GUITAR RIG 6 LE for guitar amplification emulations and guitar

Line Inputs
Input impedance: 16kO
Maximum input level: +22dBu
Gain range: 56dB
Frequency response 20Hz to 20kHz: +/-0.05dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -100dB typical (un-weighted)
Instrument Input
Input impedance: 1MO on Tip
Maximum input level: +11.5dBu
Gain range: 56dB
Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -91dB typical (un-weighted)
Microphone Preamps
Input impedance: 2.5kO
Maximum input level: +9dBu
Gain range: 56dB
Equivalent Input Noise (EIN): -129dB typical (A-weighted)
Frequency response 20Hz to 20kHz: +/-0.06dB (min gain)
Dynamic range: 110dB typical (A-weighted)
THD+N @ 1kHz: -100dB typical (un-weighted)
Speakers
Output impedance: 94O
Maximum output level: +12dBu
Frequency response 20-20kHz: +/-0.09dB
Dynamic range: 107.5dB typical (A-weighted)
THD+N @ 1kHz: -101dB typical (un-weighted)
Phones
Output impedance: 10O
Maximum output level: +11.4dBu
Frequency response 20-20kHz: +/-0.09dB
Dynamic range: 104dB

Notes: The Nektar SE49 USB MIDI controller keyboard has all the features you need to start making music with your computer. It is compatible with any MIDI music software, sports a full-size keyboard with velocity, includes all the performance controls you'd expect and even has Nektar DAW control features. Simply plug the supplied USB-cable in and go: Capture your ideas while they are fresh!

PLAY - THE ACTION:
The keys are a keyboard controller's most important feature. So we made sure that the SE49 has keys that are fun and expressive to play: Its synth-action keybed has 49 velocity-sensitive full-size keys with a defined and firm feel. And as everyone has their own playing style and preferences, we have included a choice of 4 different velocity curves (plus 3 fixed ones) so you can adjust the keyboard response to your needs.

PERFORM - THE PERFORMANCE CONTROLS:
No matter if you want to play a complex solo in the style of Herbie Hancock or are just trying to make an EDM wobble bass more lively by adding modulation: the SE49's large Pitch Bend and Modulation Wheels will get you there. They have a tight grip and offer just the right resistance. For piano-style sustain effects, you can connect a switch or pedal to the foot switch socket on the back of the SE49.

BUTTON UP - THE CONTROLS:
Four buttons and one MIDI-assignable fader to the left of the keys make the SE49 even more flexible: Shift the keyboard up or down -3/+4 octaves with multi-coloured LED indicators showing the exact status. Or transpose the keys +/- 12 semitones with the transpose buttons right below.

CUSTOM MIDI ASSIGNMENTS:
Take control a notch further: Most soft- and hardware products with MIDI have their parameters assigned to so-called MIDI CC messages. This lets you do cool things such as changing filter cutoff, panning, effects bypass or any other parameter that has a MIDI CC assigned to it from a hardware control on your SE49.

Simply set the MIDI Fader, Modulation Wheel or foot switch pedal to control the MIDI CC message you want. Your assignments are stored over power cycling, so next time you can continue where you left off right away.

CONTROL YOUR DAW:
How about getting a better workflow without any of this nerdy stuff? How about transport control, level mixing and track selection directly from the SE49? Take control of your DAW's most important functions with our Nektar DAW Integration software! Of course, the SE49 works with any MIDI software, but with custom Nektar DAW Integration you can do even more: Use the Transpose buttons for track or patch change, always have the currently selected track's volume assigned to the fader and turn the Octave and Transpose buttons into Play, Stop, Record and Rewind buttons. How's that for giving the mouse a break?

Nektar DAW Integration for SE25 currently supports Bitwig, Cubase, Garageband, Logic, Nuendo, Digital Performer, Mixcraft, Reason, Reaper, Sonar and Studio One. (In order to take advantage of Nektar DAW Integration, you need to register your SE25 and download the integration files from your user account.)

GET CONNECTED - SETUP & iOS:
SE49 keyboards are USB class compliant and don't require a driver to operate. Installation and connection is easy; just plug the keyboard in to a USB port on your computer. You can also connect an Impact SE49 keyboard to an iOS device using the optional Apple USB camera connection kit. A 1/4? input jack allows you to add a foot switch pedal for sustain or sending MIDI messages.

CAPTURE YOUR IDEAS - BITWIG 8-TRACK INCLUDED:
You can start producing, performing, and designing sounds like a pro from day one with the included Bitwig 8-Track DAW. It includes over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own, too. The 'Bitwig Essentials Package' comes as part of this package as well, featuring a highly versatile handpicked selection of loops, clips and samples, to make it even easier to get you started.

Notes: APC Key 25 Mk2

The new APC Key 25 Mk2 is a versatile and compact MIDI keyboard controller that seamlessly delivers the power to perform and create anywhere, for the perfect combination of clip launching and composing in Ableton Live. Bring your original melodies, chord structures and layered harmonic ideas to life with APC Key 25.
Focus on your performance

40 brilliant RGB-backlit pads

APC Key 25 Mk2 features 40 new RGB-backlit pads for a brilliant and precise representation of your Ableton Live session clips. Whether in the studio or on stage, the scrollable RGB-enabled pad matrix will boldly shine through. In the heart of your most creative moment, launch and activate loops, instruments, vocals, and more with confidence.

Launch an immersive music-creation experience

APC Key 25 allows you to trigger individual loops, samples, and melodies or entire Scenes for the most imaginative and inspirational music creation performances. 40 RGB-backlit pads on a customizable 5x8 grid accurately reflect clips from your Ableton Live Session and are always in reach for the ultimate navigational experience, even with large sessions.

The keys to your creativity

Your melodic performance

The APC Key 25 authentically brings out your melodic ideas. Dive into Ableton's powerful instruments and express your music on your own terms. Create your own bass lines with AIR Technology's Hybrid 3, and layer dynamic piano sounds with the Mini Grand Virtual Instrument. Combined with Ableton's Scene and Clip launching workflow, APC Key 25 allows you to add original performances to your tracks.

Gen 2 keybed - performance and feel

APC Key 25 features 25 keys with the Gen 2 Dynamic Keybed for melodic and harmonic music creation. Play your own chords, arpeggios, solos, and soundscapes with the incredibly versatile keys. Use the Octave Up/Down buttons for expanded note range. The dedicated Sustain button adds space and dimension to your playing, ensuring the APC Key 25 is ready for any musical moment.

Simple controls for powerful music making

A more powerful Ableton experience

Enjoy serious hands-on control for a powerfully creative Ableton Live experience. APC Key 25 features 8 endless 360-knobs to adjust volume, pan, insert effect sends and more for smooth, intuitive control of your sessions. Tweak reverbs, sweep filters, or write automation that will bring your music to life. Shape your sounds instantly using the assignable endless 360-knob controls.

Precise intuitive control

Create your own distinct sounds with ease. With Device Mode, the APC Key 25 knobs are automatically mapped to the eight Macro Controls of Ableton Live's selected device. Control multiple parameters with one knob to generate totally innovative sounds. Get more hands-on control with Soft Keys for easy access to Solo, Mute, Stop and Record arm functions.

Ableton Live Lite and AIR technology software bundle

Launch with Ableton Live Lite

APC Key 25 includes Ableton Live Lite software. Start creating and making music with this powerful clip launching DAW packed with instruments, mixing effects, samples, and the ability to record and mix audio and MIDI. Ableton Live Lite offers all the tools to transform your musical ideas into exciting songs and performances.

Elevate your sound with AIR

Elevate your sound with the included virtual instrument pack from award-winning sound design company AIR Music Technology. In addition to Ableton Live Lite, APC Key 25 also includes multiple world-class plugin instruments including Hybrid 3 - a powerful polyphonic analogue synth, Mini Grand - an acoustic piano instrument, and Velvet - a vintage electric piano instrument.

APC KEY 25 MK2 Technical Specifications

Note Keys: 25 velocity-sensitive keys; 10-octave range with octaveup/down buttons
Clip Buttons: 40 RGB backlit clip-launch buttons in 8x5 matrix Knobs 8 360O knobswith 4 modes
Inputs / Outputs: 1 USB port
Power: USB-bus-powered
Dimensions: 12.4" x 7.6" x 1.9" 315 x 193 x 47 mm (width x depth x height)
Weight: 2.1 lbs. 0.9 kg

Notes: NANOPATCH M is a tiny and incredibly versatile patch bay, with mini jacks sockets on both the rear and the top panel. It is ideal for connecting to instruments and a mixer when used in conjunction with NANOPATCH X.

It also works with CV, so can be used as a breakout box for semi-modular synths with outputs in hard-to-reach places (e.g. Moog Grandmother) and devices that output CV over TRS sockets (e.g. MPC ONE).

Dimensions: 76 mm x 70 mm x 22 mm (not including sockets and feet)

Mini jack sockets on the back panel makes it easy to connect to eurorack systems and small instruments such as Korg Volcas.

3.5 mm to 6.35 mm cables can be used when connecting to equipment with 1/4" sockets.

Using standard eurorack cables, easily patch signals from a NANOPATCH M through effects connected to a NANOPATCH X (and back again).

How It Works

Rear sockets labelled 1/2, 3/4, 5/6 and 7/8 can be used for either mono or stereo signals. For example, if a TRS cable is plugged into rear socket 1/2, the left and right channels will break out to sockets 1 and 2 on the top panel. If another cable is plugged into rear socket 2, rear sockets 1 and 2 will correspond to sockets 1 and 2 on the top panel, both in mono.

Normalling

Channels 1-4 can be full-normalled to channels 5-8 using DIP switches located on the side of the NANOPATCH M.

This allows a signal to pass through from instrument to mixer without the need for any patching. When a patch cable is inserted into either socket of a normalled pair, the connection is broken, allowing for custom routing of the signal.

Typical Setup

A typical setup would be to have four instruments connected to channels 1-4 and four mixer channels connected to channels 5-8.

Connections to the mixer could either be made with four separate mono cables (utilizing the sockets on the side) or with two insert cables (as in the diagram).

Notes: We can't get enough of Teenage Engineering's quirky little Pocket Operators. The PO-24 is an oddball classic, specialising in office-themed percussion. Weird and wonderful stuff as usual from the innovative Swedish brand.

Supplier's notes:
Noise percussion drum machine and sequencer, with parameter locks, solo functionality and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.

Notes: The Midas M32R, celebrated for its superior audio quality and comprehensive control features, has established itself as a crucial element in both live sound and studio settings. In acknowledgement of its vital role in audio production and owing to the high demand for effective protection, Decksaver are pleased to present the cover for the Midas M32R.

Crafted from robust, high-grade polycarbonate, this cover is specifically designed to protect your M32R from dust, liquid spills, and accidental impacts, ensuring that your mixer remains in optimal condition.

This Decksaver cover is precision-engineered to snugly fit the Midas M32R, offering a precise, form-fitting shield over all the mixer's knobs, faders, and controls, whilst conveniently allowing for cable connections. This thoughtful design is the result of an in-depth understanding of the needs of audio professionals, facilitating ease of use for those requiring quick, efficient setup and breakdown.

Ideal for use in the demanding environments of live sound, busy recording studios, or for protective storage, this cover acts as a reliable barrier, preserving both the functionality and the aesthetic appeal of your M32R.

Opting for the Decksaver cover for your M32R is more than just a precautionary measure; it signifies a commitment to preserving the longevity and performance of an integral piece of your audio equipment. Highly regarded by industry professionals and sought after by audio enthusiasts, this cover is an indispensable accessory for anyone committed to maintaining their Midas M32R in prime condition, ready for any audio challenge or creative endeavour.

Dimensions

Weight: 1.04 kg
Length: 48.5 cm
Width: 63.5 cm
Height: 1.6 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The microKEY series are a compact family of USB MIDI keyboards featuring the velocity-sensitive Natural Touch mini-keyboard; acclaimed on instruments such as the microKORG XL and microARRANGER. In addition to the existing 37-key model, the lineup has been expanded with the addition of a supremely portable 25-key model, and a 5-octave 61-key model providing the space to play freely with both hands.

Bundled software and discount coupons are more generous than ever; the 61-key model even comes with a license for the Korg Legacy Collection. The microKEY is the ideal USB MIDI keyboard for the musician who wants to assemble a convenient and compact music production system.

The microKEY25 features excellent portability, allowing you to enjoy playing and producing with a great-feeling keyboard even when you're away from home. It features an expressive Joystick, as traditionally found on larger controllers, and provides simultaneous control of multiple parameters at the same time, along with control of the built-in tempo-synced arpeggiator function. That's not all; the microKEY25 can be powered directly from your iPad via the Camera Connection Kit, and it can be immediately used to control MIDI-capable apps such as Korg's iMS-20. The microKEY25 also includes a download code for FREE Korg M1Le software, giving you all of the preset sounds and all of the PCM waveforms of the original M1, and a browser/search function that makes it easy to find that perfect sound.

Also included are licenses for Applied Acoustics Systems' Strum Acoustic Session, Lounge Lizard Session, and Ultra Analog Session as well as a license for Toontrack's software drum sound module EzDrummer Lite, and a discount coupon for Ableton's Live, Live Suite, and Live LE DAW software, widely popular for its sophisticated functionality.

Notes: The Korg NanoKontrol2 slim-line USB control surface fits perfectly in front of your laptop computer or desktop keyboard, offering impressive control while conserving valuable set-up space.

The Korg NanoKontrol2 controller provides knobs, switches and faders. It is perfect for controlling any DAW computer based DAW or numerous types of other music production software.

In a body proportioned to fit perfectly in front of your laptop computer, the Korg NanoKontrol2 provides 8 channels of the controllers you need to control your music software. It also features a dedicated transport control section. Many software titles are supported, dramatically reducing the need to make complicated connection settings. 1 knob, 1 fader and 3 switches are provided for each of the 8 channels, respectively assigned to pan, volume and solo/mute/record. In addition, there's also a marker button, making it easy to assign marks at important points in your song for more efficient recording and song production.

Notes: Mackie Mix Compact Mixers deliver the quality you expect from the world leader in compact mixer design.

The professional and affordable Mix Series mixers feature high quality components, a rugged metal chassis and features designed for a variety of applications.

With Mackie preamps and proven high-headroom, low-noise design, Mix delivers great sound from any source. Besides, wouldn't you rather Mix on a Mackie?

Notes: Super basic mixer ideal for small hardware setups. Smash a kick drum into a mic input and pretend you're Jeff Mills. Lovely. Two mono mic channels, two stereo line-level channels plus a stereo aux return.

Supplier notes:
Mackie Mix Compact Mixers deliver the quality you expect from the world leader in compact mixer design.

The professional and affordable Mix Series mixers feature high quality components, a rugged metal chassis and features designed for a variety of applications. With Mackie preamps and proven high-headroom, low-noise design, Mix delivers great sound from any source.

Besides, wouldn't you rather Mix on a Mackie?

Notes: A padded carrying case for the Theremini and Etherwave Theremins. Perfect for the thereminist on-the-go. Black nylon packcloth with 3/4" foam padding, removable padded shoulder strap, internal pouch for antennas, and external pouch for power supply unit.

Key Features

Nylon Construction
Pouches for Antennas & Power Supply
3/4" Foam Padding
Removable Shoulder Strap

Notes: Large sized spring reverb tank, Accutronics 9BB2C1B with 3×2 springs and medium decay (1.75 - 3 seconds).

Notes: Superb value for money with this hugely popular model from the ever-reliable Audio-Technica. A little smaller and a lot cheaper than the excellent M50X model, but with similarly clear, balanced performance.

Supplier's Notes:

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range.

Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: Wooden side cheeks for The Vermona DRM1 (any mark).

If you would like to use those instruments as desktop unit you do cover the rack mount wholes with these nice wood sides, the unit feels much more handable and robust while packaging and using it in your live set.

Notes: The Korg Monotron Duo is capable of creating even stranger, extreme and diverse sounds. The combination of 2 oscillators in unison provide thick, rich analogue tones, while tuning them to different intervals can create classic solo synth sounds and powerful effects. Korg have utilized their X-Mod (cross modulation taken from their classic Mono/Poly synths) circuitry in the Monontron Duo, enabling you to generate the mildest of sounds, to vibrant vibrato, to sharp, fm style abrasive synth sounds.

The Monotron Duo features Korg's fantastic enhanced ribbon controller keyboard and now features the same scale function as used on the Kaossilator, chromatic, major, minor or off scales are available, allowing your music juices to flow freely over any music. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Duo uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

The input jack (AUX input) built into the Monotron Duo's compact body allow you to place any audio source into the Monotron Duo's signal path, directly before the analog filter. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter effects.

A miniature speaker is built into the Monotron Duo. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Duo's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

http://www.youtube.com/watch?v=wWLOxRSll5Q

Notes: The 770 is a high-quality multipurpose condenser mic that vocalists gravitate to for its solid low-frequency response and clear high end. To achieve this we use a high-quality FET pre-amp and transformerless balanced output for a wide dynamic range and low noise. The 770 features include a low-frequency roll-off to reduce unwanted rumbling and a -10db pad to facilitate a wide variety of sound sources. The 770 comes with a shock mount to reduce mechanical vibrations and a rugged carrying case. The 770 is a perfect combination of quality, flexibility, and value for both professional and home recording studios.

Multipurpose workhorse microphone equally at home in a studio or streaming/podcasting setup
Low-frequency roll-off and -10db pad for a variety of sources
Neutral voicing provides the clarity needed for critical audio applications

Technical specifications:

Type: Condenser microphone
Capsule: 22mm gold-sputtered capsule
Frequency response: 20 Hz - 20 kHz
Polar pattern: Cardioid
Sensitivity: 15mV/Pa
Impedance: 150 ohms
Attenuation switch: 0dB, -10dB
High pass filter: 6dB/octave @ 150Hz
Equivalent noise level: 20 dB (A-weighted IEC 268-4)
Max SPL for .5% THD: 137 dB
S/N Ratio: 74 dB (Ref. 1 Pa A-weighted)
Power requirements: 48V phantom power

Size and weight:
59mm x 158mm / 2.32 in. x 6.22 in.
453.59g / 1lb

Metal finish: Black with black grill
Included accessories: MXL case | MXL 70 shock mount

In the box:

MXL 770 Mic
Carrying Case
High Isolation Shockmount

Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Notes: USB Audio-Interface for all cases: With two build-in Microphone-Preamps with Phantom Power and a complete 16 Bit/48 kHz Stereo Instrument/Line Interface this class compliant USB Audio Interface is very easy to use. Fully USB powered, with fast Windows ASIO drivers and adjustable headphone output the Audiolink III gives you all the recording possibilities you will ever need. New: The two XLR/TRS combo inputs on the front side.

Works driverless with Mac OS/X, Windows XP SP2, Windows Vista, Windows 7, 8 and Windows 10

ASIO driver for Windows XP/Vista/Win7/Win8 and Windows 10 for download available

Inclusive: free Miditech software bundle (download versions): Toontrack EZ Mix 2 lite, Magix Samplitude Pro X2 Silver, Makemusic Finale Notepad, Ik Multimedias Amplitube CS, Magix Independence free, Waldorf Edition LE and Imagelines Poizone Synthesizer

Notes: Engineered specifically for the Native Instruments Kontrol S61 MK2 Keyboard Controller. Custom moulded to fit the contours of the S61 MK2 whilst leaving USB connections in place, the Kontrol S61 MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or controller bag for maximum protection. Don't go losing your keys.

Notes: The all-new GEM-05USB mixer makes audio routing easy. Equipped with Bluetooth streaming, USB playback, customizable sound, and a 5-input 2-bus mixer. The GEM-05USB brings state-of-the-art professional-quality audio on the go, giving you all the controls you need. This mixer fuses a user-friendly interface with premium sound. Bluetooth streaming for playback from any compatible device. State of the art mic preamp with phantom power plus 2 Band EQ with dedicated volume control. Customize your sound with dedicated delay FX control. Headphone out with dedicated volume control.

Notes: The all-new GEM-08USB mixer makes audio routing easy. Equipped with Bluetooth streaming, USB playback, customizable sound, and a 8-input 2-bus mixer. The GEM-08USB brings state-of-the-art professional-quality audio on the go. Giving you all the controls you need. This mixer fuses a user-friendly interface with premium sound. Bluetooth streaming for playback from any compatible device. State of the art mic preamps with phantom power & 3 Band EQ with dedicated volume control. Customize your sound with dedicated delay FX control. Headphone out with dedicated volume control.

Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.

uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.

The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.

Notes: Macro Power S8 is a pedal power supply with eight output power supply jacks, equipped with vary functions input voltage switch, independent output power jacks, over-current protection and adjustable output. It was designed to meet users needs and offer convenient and pure experiences.

Output power jacks: From left to right
One adjustable voltage output power jack, can choose output voltage from 9V/12V/15V/18V. The output current is 200mA.
Three independent output power jacks, each lines output voltage is 9V, and the output current is 200mA.
Four parallel output power jacks, each lines output voltage is 9V. And support the whole 400mA power needs that the four lines parallel into an independent output power jack.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: Dust cover for Soma Laboratory Pulsar-23

Notes: The ultra-portable MPK Mini Play is based on the world's most popular midi controller - Akai Professional's MPK Mini-but now it comes packed with 128 sounds and its own built-in speaker. With 8 backlit MPC drum pads and a 4-way joystick for simple control, players have all they need to play their music anytime, anywhere. Four knobs (two banks capable of controlling eight different parameters) can be used to tweak sounds and edit multiple parameters in real-time, giving musicians even more performance possibilities. Powered by 3 "AA" batteries, the MPK Mini Play is built for hours of wireless fun.

Not just a mini keyboard, the MPK Mini Play can also connect to a computer via USB port for the same plug-and-play MIDI functionality as the classic MPK Mini controllers. If not disturbing others is a priority, players can use the mini-audio output jack to connect headphones to the MPK Mini Play. When you want a bigger sound, simply connect to external speakers using the same output jack. All-in-one, easy-to-use fun with "pro" features - that's the MPK Mini Play!

"We are extremely excited to introduce the MPK Mini Play," said Dan Gill, Product Manager for Akai Professional. "The MPK Mini was a huge hit with musicians and now having all those sounds on-board with a built-in speaker, along with its go-anywhere portability, Play opens up new musical possibilities that people are going to love."

KEY SPECS

Keys
25 velocity-sensitive

Pads
8 pressure and velocity sensitive
MPC-style Light-up Pads x 2 Banks

Knobs
4 assignable controller pots
1 x 360 Encoder for Display Navigation
1 Volume control

Computer Interface
USB-MIDI communications to Mac/PC

Octaves
10 with Octave Up and Down

Arpeggiator
Yes

Additional Controls
Pitchbend/Mod Joystick
Note Repeat Button
Full Level Button
Tap Tempo Button

Additional Inputs
1 14" (6.35mm) TS input for sustain pedal

Output
1 1/8" (3.5mm) headphone output
Built-in speaker

Power
USB bus powered
3 x AA batteries

Dimensions:
12.29" x 6.80" x 1.83" / 31.2 x 17.2 x 4.6 cm (WxDxH)
1.6 lbs

Notes: Custom engineered in the UK for the Elektron Digitone Keys Synthesiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: The CTRL MPC LIVE II is custom designed to a hold the Akai MPC LIVE II and is a very lightweight and convenient solution to carry your MPC well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC LIVE II
MPC Live
Akai MPC Touch

BASICS:
Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Including practical cable organizer panel
Incl. removable egg-foam padding to protect knobs, faders and pads
Comfortable carrying handles and shoulder strap
Compatible with Decksaverr cover

SPECS:
Outer measures: 44 x 29 x 13 cm
Inner measures: 42 x 27 x 11 cm
Weight: 1,26 kg

Notes: The MC series offers a versatile headphone with high performance 50mm Drivers, specifically designed for long term comfort for either studio or home use, with collapsible structure for simple transportation.

The MC-250 brings this series to new heights with a deeper 10Hz-20kHz frequency range, and 100dB sensitivity. Whilst still only carrying at 265g / 9.35. oz and with collapsible folding design, this edition is absolutely perfect for storage, and portability with ease. The MP-250 ensures punchy deep bass and precision-tuned highs to new degrees, ensuring the ultra-wide soundstage that your studio and home requires.

Notes: The Prophet Rev-2 Keyboard is a powerful and versatile synthesizer that embodies the rich legacy of Sequential's iconic Prophet series. With its extensive sound-shaping capabilities, robust performance features, and expressive keyboard, the Prophet Rev-2 Keyboard is designed to inspire and elevate your music production and performance.

At the heart of the Prophet Rev-2 Keyboard are its dual digital oscillators per voice, offering a total of 16 voices of polyphony. These oscillators provide a wide range of waveforms, from classic analog shapes to more complex digital waveforms, giving you the flexibility to create a diverse palette of sounds. The high-resolution digital effects section adds further depth and dimension to your patches, allowing you to sculpt your sounds to perfection.

One of the standout features of the Prophet Rev-2 Keyboard is its extensive modulation capabilities. With its four LFOs, three envelopes, and extensive modulation matrix, you can shape and evolve your sounds in intricate ways. From subtle timbral variations to complex evolving textures, the Prophet Rev-2 Keyboard gives you the tools to explore new sonic territories and express your musical ideas with depth and nuance.

The Prophet Rev-2 Keyboard also features a versatile and intuitive sequencer. With its 16-step polyphonic sequencer, you can create intricate patterns and sequences that bring your compositions to life. The sequencer offers real-time recording, step editing, and parameter automation, allowing you to create dynamic and evolving musical phrases. Additionally, the arpeggiator provides further rhythmic possibilities, adding movement and excitement to your performances.

With its full-sized, semi-weighted keyboard, the Prophet Rev-2 Keyboard offers a responsive and expressive playing experience. The velocity-sensitive keys and aftertouch functionality allow for nuanced and expressive performances, giving you the ability to infuse your music with emotion and dynamics. Whether you're playing in the studio or performing on stage, the Prophet Rev-2 Keyboard's keyboard is a joy to play and offers a high level of expressiveness.

To ensure the longevity and protection of your prized Prophet Rev-2 Keyboard, the Decksaver cover is an essential accessory. Custom-molded to fit the exact dimensions of the keyboard, the cover provides reliable protection against dust, liquid spills, and accidental impacts. The durable polycarbonate construction shields your Prophet Rev-2 Keyboard from potential damage, whether it's in your studio, on stage, or during transportation.

Engineered in the UK, the Decksaver cover is designed to offer a perfect fit while accommodating cable connections. It allows you to keep your Prophet Rev-2 Keyboard ready for operation at all times, while providing peace of mind knowing that your instrument is protected from potential hazards. Whether you're a professional musician, a sound designer, or an enthusiast, the combination of the Prophet Rev-2 Keyboard and the Decksaver cover ensures that your instrument remains safe and ready to inspire for years to come.

Unleash your creativity and dive into the sonic possibilities of the Prophet Rev-2 Keyboard, knowing that your valuable synthesizer is protected by the reliable Decksaver cover. Whether you're crafting intricate soundscapes, performing expressive solos, or exploring new musical territories, the Prophet Rev-2 Keyboard and the Decksaver cover are the perfect combination for taking your music to new heights while keeping your instrument safe and sound.

KEY FEATURES
Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Keeps settings and controls in place when not in use.
Low profile design enables compatibility with most flight cases and travel bags.

DIMENSIONS
Weight: 1.61kg
Length: 90.6cm
Width: 32.6cm
Height: 3.4cm

Notes: ZVERBZ is a collection of new stereo reverb algorithms for the Z-DSP. They range from typical reverbs to more complex effects that combine delay and pitch shifting with reverb. The effects are grouped by decades based on either the era an algorithm was introduced or the time when the effect was most popular. This variety of reverbs covers small to epic size spaces with the addition of shimmering, feedback tunneled pitch shifting, tape delay drivers, gated reverbs and a lot more. Analog clocking of the DSP chip and CV over the parameters enables even more experimentation. This is a collection inspired by the best from the past right at your fingertips.

Please note: The Z-DSP module is not included with this purchase- it is for demonstration purposes only.

Notes: Whether you're starting your first podcast, telling your YouTube subscribers about the latest trends, or running a program for your local volunteer radio station from your living room, you need a microphone that will bring your voice to your listener with clarity and warmth. The PD-70 is built to capture the spoken word cleanly and clearly while eliminating mechanical noise and breathiness that can get between you and your audience. Thanks to superior off-axis rejection, you can set up your broadcast studio in just about any space- and unwanted reverberance, electrical hum, and the random car driving by will be left behind, leaving only the pristine, natural sound of your voice.

Presonus are delighted to announce that the already fantastic value PD-70 Broadcast Microphone will, from now on, include over $1000 worth of free software upon registration.

When registered to your my.presonus account (serial number is on the base of the microphone above the XLR input), you will automatically receive a license for Studio One Prime and the Studio Magic Plugin Suite.

Technical specifications:

Acoustic Performance:

Capsule Type: Dynamic
Sensitivity: 1.6mV/Pa
Frequency Response: 20 Hz to 20 kHz
Polar Pattern: Cardioid
Output Impendance: 350O

Notes: A Digital DJ looking for a professional, durable case solution for your Akai MPC One+ controllers? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Akai MPC One+ controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications:

Color: Black
Weight: 0,56 kg / 1.232 lbs
Outer Dimensions (W x H x D): 38.3 x 28.6 x 6.7 cm | 15.1 x 11.2 x 2.6 inch
Inner Dimensions (W x H x D): 37.3 x 27.6 x 5.7 cm | 14.6 x 10.8 x 2.2 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits: Akai MPC One+, Akai MPC One, power adapter & extra cables

Please note: The Akai MPC One Controller is not included in this purchase, it is shown for demonstration purposes only.

Notes: The Decksaver Moog Matriarch Synthesiser Cover features an ultra-durable polycarbonate shell, designed to protect from dust, liquid, particulates and accidental impact damage. It will also protect against superficial damage such as scratches or bumps while on the move. The high quality smoke/clear sheen allows you to see the Medusa through the cover, allowing you to see your gear at all times. The smooth and sheen like finish will slide straight into a bag, ideal for the travelling musician.

Notes: You push the button and the audiowerkstatt din-restarter starts or stops the following sequencer at the beginning of the next bar (4/4-stroke only) in perfect timing.

If the sequencer is running, it will be stopped at the next bar and if the sequencer is standing, it is started at the next bar.

The device operates as a standard in "Sync24"-mode (24 clock pulses per quarter note). By holding the button when switching on, the device is started in "Sync48"-mode (48 clock pulses per quarter note).

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Notes: Literally the size of a business card (if a little bit thicker), one of the smallest synths on the market. Simple design with a surprisingly punchy sound, plus CV and gate inputs for control.

Supplier's Notes:
The Business Card Synthesizer is a tiny synth that can be connected to a Business Card Sequencer, other synth gear, or played by itself.

Headphones can be connected directly to the output of the synth, and there are plenty of knobs to play with, so you can easily make noises anywhere. Great for learning about synthesizers!

S&H Button: Enables Sample & Hold, which disables the external CV IN jack and uses LFO1 and LFO2 to determine oscillator pitch. LFO1 sets the sample rate (SHAPE is ignored for this), and LFO2 is the wave that gets sampled.

GATE Button: Manually turns on the gate so sound comes out of the synth. This control is momentary, but you can latch it on by tapping the S&H button while holding the GATE button down.

COARSE TUNE: Adjusts the pitch of the oscillator up or down in large increments

FINE TUNE: Adjusts the pitch of the oscillator up or down in fine increments

SHAPE: Changes the shape of the wave produced by the main oscillator (VCO). Turning this control fully CW gives you a triangle wave. Start turning it CCW takes you through sawtooth/ramp, then at about the 12:00 position you get a square wave. Continue turning it CCW and you get several higher duty cycle square waves
.
GLIDE: Adjusts the rate at which the pitch of the VCO takes to go between pitches (whether changed by the COARSE TUNE knob or CV IN). Fully CCW causes the pitch to react almost instantly, while fully CW makes it take its sweet time.

LFO 1 / LFO 2 SHAPE: Changes the shape of the waves produced by the low-frequency oscillators (LFOs). The shapes are similar to those of the VCO, except that the LFOs have sawtooth/ramp waves that go both up and down (since you can actually hear the difference at LFO rates).

LFO 1 / LFO 2 RATE: Controls how fast the LFOs go.

LFO -> VCO: Routes the two LFOs to control the pitch of the main oscillator. The 12:00 position is basically "off", and the LFOs have no effect on pitch. Start turning the control CCW and LFO1 starts changing the pitch of the VCO. Maximum effect is at about 10:00. Continuing to turn the control starts to bring in LFO2 as well. All the way CCW gives you full effect from both LFO1 and LFO2.

Turning the control CW from 12:00 does essentially the same thing, but brings in LFO2 first, then LFO1.

This might seem like kind of a weird control, but it gives you quite a bit of routing flexibility with one knob. You can have no pitch modulation, LFO1, LFO2, LFO1 with a little LFO2, or LFO2 with a little LFO1.

LFO -> VCA: Routes the two LFOs to control the amplitude of the oscillator. (See LFO -> VCO control description above for more information about how the control works.)

ATTACK: Controls how fast the audio amplitude fades in when the gate is triggered. CCW is fast and CW is slow.

DECAY: Controls how fast the audio amplitude fades out when the gate is released. CCW is fast and CW is slow.

VOLUME: Controls the overall volume of the signal coming from AUDIO OUT.

FILTER: Changes the cutoff frequency of an analog low-pass filter. Turn the knob fully CW and all frequencies (that you can hear) are let through. Start turning it CCW and the high frequencies start getting cut off, until the sound becomes muddy / muffled. Use in conjunction with the SHAPE control to get the tonal quality you are looking for.

Connections:
CV IN: Accepts a 1 volt/octave control voltage to control the pitch of the oscillator. It responds from about 0-5V, but voltages outside of this range won't cause damage. The CV input is quantized, so only valid (western scale) notes are played. This input is ignored when Sample & Hold is enabled.
GATE IN: A voltage greater than about 2.5V will turn on the gate and allow audio to come out the output of the synth.
AUDIO OUT: Connect to an amplifier or another synth. The jack has both the tip and ring connected, so you can even use stereo headphones and hear sound from both ears.
Power: Connect 7.5-15VDC to this 3.5mm TS jack to power the synthesizer. The tip is positive (don't worry, there's a protection diode in case you get it reversed). You can get power from a 9V battery, AC adapter, or you may even be able to find an output on your modular synthesizer that can provide enough current.

Specifications:
Power supply: 7-15VDC (reverse-polarity protected!)
Power connection: 3.5mm phone jack, center-positive
Current draw: 15ma
Dimensions: 3.5" x 2" (the same as a business card!)

Notes: The CTRL Case MPC ONE is custom designed to a hold the new AKAI MPC ONE and is a very lightweight and convenient solution to carry your sampling workstation well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize audio cables and accessories.

FITS:
Akai MPC One

SPECS
Outer measures: 32 x 32 x 13,5 cm
Inner measures: 28 x 28 x 10 cm
Weight: 0,8 kg

Notes: The Meris MIDI I/O is a MIDI-TRS control interface which opens up unlimited control capabilities for up to four Meris pedals. The interface offers remote control, the saving of multiple presets offline and much more, all via your favourite MIDI controller device - even wirelessly via Bluetooth.

Finished in stylish black paintwork, it allows control of all your Meris pedal's parameters via MIDI and can control up to 4 separate pedals, using different MIDI channels.

MIDI I/O supports MIDI input and output from all Meris pedals and therefore allows unlimited offline preset saving and loading, so you can recall all your preset creations and with the amount of control each Meris pedal gives you, this is a hugely valuable feature.

Using a wireless Bluetooth/MIDI dongle and the MIDI I/O also can allows full control of all parameters of your Meris pedal via your iPhone with a suitable MIDI controller app, when using a suitable Bluetooth MIDI adapter (like Yamaha's MD-BT01 or similar). The interface has MIDI in and out activity status LEDs so you can keep tabs on what's sending and receiving MIDI.
As a bonus, the Meris MIDI I/O is also compatible with pedals from other companies like Empress and Chase Bliss*.

9V DC center-negative, 10mA, 2.1mm jack

Dimensions 3.7" wide, 2.6" deep, 1.5" tall

Weight 6.4 ounces

Includes 1 Flat 11" TRS cable. (No power supply included.)

Notes: Soft case - will ensure the safety of your instruments! Best quality from Cordura with exclusive material finishing with red thread. They are not so heavy as hard cases. High quality embroidered Lyra-8 logo. Very low weight!

(Protection - 1 cm hard foam made from Cordura: Cordura is the brand name for a collection of fabrics used in a wide array of products including luggage, backpacks, trousers, military wear and performance apparel. Cordura fabrics are known for their durability and resistance to abrasions, tears and scuffs.)

Notes: A-100SSB is a combination of power supply and bus board with 8 connectors for A-100 modules, planned for applications with up to 8 modules and a max. current of 380 mA.

- Wide range mains voltage input 100-240V AC / 50-60 Hz
- IEC inlet on board for the connection of a suitable mains cable (a suitable mains cable has to be purchased by the customer locally, it's not included with the A-100SSB)
- Switching supply with +12V/380 mA and -12V/380mA for the operation of A-100 modules up to 380 mA total supply current
- Safety cover at the bottom side (covers all elements that lead mains voltage)
- On board fuse
- 8 bus connectors
- LED displays for +12V, -12V and +5V
- Dimensions: about 270 mm (length) x 55 mm (width) x 35 mm (height)
- Several 3mm holes for mounting the unit on a rear panel or bottom plate

Notes: Dust, liquid and accidental impact have taken many a good analogue synth down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the OB-6 module can sit ready for operation. Our OB-6 module cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz

Notes: A professional guitarist/ musician looking for a professional, durable case solution for your Universal Audio OX Amp Top Box? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Universal Audio OX Amp Top Box, these cases are perfect for the travelling guitarist/ musician that needs to protect their equipment.

Specifications

Colour: Black
Weight: 1,40 kg / 3.08 lbs
Outer Dimensions (W x H x D): 42.5 x 28.8 x 15.0 cm | 16.7 x 11.3 x 5.9 inch
Inner Dimensions (W x H x D): 38.5 x 23.4 x 14.0 cm | 15.1 x 9.2 x 5.5 inch
Material: Durashock moulded EVA foam

Protection:

Water repellent laminated nylon exterior
Black soft fleece interior

Extras

Heavy duty handle
Easy grip zipper puller

Fits

Universal Audio OX Amp Top Box

Notes: Designed for musicians and performers who demand outstanding audio quality, the PreSonus PX-1 cardioid condenser microphone is an ideal solution for recording vocals, guitar, podcasts, and much more. A true large-diaphragm condenser microphone, the PX-1 features a 25mm, gold-sputtered capsule designed to provide exceptional clarity throughout its frequency response range. Rugged construction and top-quality performance specifications make the PX-1 large diaphragm microphone an excellent addition for any home recording or streaming studio.

Notes: Dynamic super-cardioid vocal mic, which helps to reduce spill and feedback. Ideal for presentations, conferences, choirs, rehearsal rooms, and stage. Easily eliminates ambient noise. Superb high frequency reproduction.

More focus. More presence:

Maximum focus, enhanced presence: the E845 delivers differences you can hear. Its expanded high frequency range creates space for demanding dynamics with a high signal quality. Vocals become more alive and sound wider and more open - even at different speaking proximities. Designed as a super-cardioid, the E845 easily eliminates ambient noise. A reliable, easy-to-use companion for presentations, conferences, spoken word performance, choirs as well as rehearsal rooms and on stage.

In the box:

1 x E845
1 x Microphone Clip
1 x Pouch

Notes: It's all about the things you connect to the The Field Kit! To get you started, Koma Elektronik have decided to offer an Expansion Pack with a bunch of different sources that you can use and connect to create your own signature sounds.

The Expansion Pack contains:

- 2 x Contact Microphones: Use these contact microphones to pick up vibration or sound, they are an amazing versatile input source
- 1 x Electro-Magnetic Pickup: This guy is good at picking up changes in magnetic fields, you can use it to amplify a string like a guitar pickup or amplify a spinning motor
- 1 x Solenoid push-pull motor: Use the solenoid to hit things, together with the DC Interface the solenoid can make anything rhythmical and percussive
- 1 x DC motor: The Motor can be used to rotate things or as a noisy oscillator together with the Electro-Magnetic Pickup
- 1 x small speaker: Use the speaker to listen to the main mix or as a sound source and to feedback sounds
- 3 x patch cables Always handy to have around to patch up different parts of your Field Kit... and a bunch of little objects to play with (little springs, marbles)

The new KOMA Elektronik Field Kit is the perfect tool for everyone who would like to experiment with electro acoustic sound. Use everyday objects, amplify them and use them to make sound, like our heroes John Cage and David Tudor used to do!

The Field Kit is optimized to process signals from microphones, contact microphones, electromagnetic pickups and able to run DC motors and solenoids. On top of that it can receive radio signals and convert signals from switches and sensors into control voltage!