安全なお買い物
Studio equipment
Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.
安全なお買い物
DJ equipment
Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ
Filter
Equipment
Format
Release Date
Featured
Price
Tags
Back catalogue: Studio Equipment
Juno's full catalogue of Studio Equipment
People also bought...
Tangible Waves AE Modular 2-Row 16x2 Standard Walnut Wood Eurorack Synth Module Case (eurorack case)
Cat: 807735 Rel: 24 May 21
16x2 Eurorack case with wooden front and sides
Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.
Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
… Read moreSame as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.
The sides, front and back are made of real-wood veneer covered MDF.
2 in stock $49.80
People also bought...
myVolts Re-Volt 6 Battery Kit (AAA & AA) (2x AAA/2x AA battery kit)
Cat: 924218 Rel: 30 Mar 23
Power up to 3 devices that need 2 x AA or 2 x AAA batteries from USB.
Notes: Revolt - 6 Battery Kit - USB Solution for AAA and AA Battery Devices kit lets you power any device that needs 2 x AAA batteries, or 2 x AA batteries, from a USB port instead.
Kit contains 3 x AAA bridge cables - each gives the device a DC power jack input, 3 x AAA dummy batteries, 6 x AAA to AA adaptors, 2 x Crazy Chain Mini cable and a 3V Ripcord USB cable.
The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.
Why buy ReVolt?
Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed
Included in the 6-battery kit:
3 x ReVolt AAA Bridge cable with smart battery
3 x AAA dummy battery: insert into battery compartment alongside the smart battery
3 x AAA to AA adaptors: for powering devices requiring AA batteries
myVolts 3V Ripcord USB to DC power cable: for powering 2-battery devices from a USB port
2 x Crazy Chain Mini cable: daisy-chain up to 4 battery devices, power all from one USB port
… Read moreKit contains 3 x AAA bridge cables - each gives the device a DC power jack input, 3 x AAA dummy batteries, 6 x AAA to AA adaptors, 2 x Crazy Chain Mini cable and a 3V Ripcord USB cable.
The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.
Why buy ReVolt?
Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed
Included in the 6-battery kit:
3 x ReVolt AAA Bridge cable with smart battery
3 x AAA dummy battery: insert into battery compartment alongside the smart battery
3 x AAA to AA adaptors: for powering devices requiring AA batteries
myVolts 3V Ripcord USB to DC power cable: for powering 2-battery devices from a USB port
2 x Crazy Chain Mini cable: daisy-chain up to 4 battery devices, power all from one USB port
2 in stock $49.60
Click for better price!
or call +44 20 7424 1960
quote 924218
quote 924218
People also bought...
LOCI Crate 30 Eurorack Case (modular synth case)
Cat: 993255 Rel: 12 Feb 24
Case designed to fit 30HP of synth modules
Notes: LOCI Crate 30 is a 30hp case for small Eurorack configurations. Supplied with strong 3D printed LOCI Rails (inspired by vector rails) and stainless steel threaded strips. At just L49.99 RRP inc VAT it's an incredibly affordable route into the modular synth world.
Great for small Eurorack Modular setups.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.
… Read moreGreat for small Eurorack Modular setups.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.
1 in stock $49.29
Click for better price!
or call +44 20 7424 1960
quote 993255
quote 993255
People also bought...
Decksaver Allen & Heath CQ-18T Dust Cover (digital studio mixer dust cover)
Cat: 1009952 Rel: 19 Apr 24
Dust cover designed to fit the Allen & Heath CQ-18T
Notes: The Allen & Heath CQ-18T has become a highly coveted device to protect, owing to its versatile features in managing mixing, recording, live performance, and digital audio workstation (DAW) integration. Its multifunctional nature distinguishes it as a preferred option for audio professionals.
Decksaver's range of professional mixer covers is designed to provide audio engineers with the confidence and peace of mind necessary in any environment.
Specifically conceived and crafted in the UK for the Allen & Heath CQ-18T, this Decksaver cover is manufactured from polycarbonate-a robust and transparent material precisely tailored to the exact specifications, achieving the perfect level of smoked clarity.
Each design is subject to rigorous testing to confirm it meets Decksaver's stringent standards, assuring you of its quality and dependability. The cover efficiently protects faders, buttons, knobs, and indicators from dust, spills, and unintended impacts, whilst preserving the integrity of your cables and settings.
Endorsed by industry experts and utilised by professionals, the Decksaver cover for the CQ-18T is the preferred selection for safeguarding your equipment, ensuring no compromise on functionality or aesthetics.
Dimensions
Weight: 0.194 kg
Length: 32.9 cm
Width: 23.8 cm
Height: 4.9 cm
Material: Smoked clear polycarbonate
WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.
… Read moreDecksaver's range of professional mixer covers is designed to provide audio engineers with the confidence and peace of mind necessary in any environment.
Specifically conceived and crafted in the UK for the Allen & Heath CQ-18T, this Decksaver cover is manufactured from polycarbonate-a robust and transparent material precisely tailored to the exact specifications, achieving the perfect level of smoked clarity.
Each design is subject to rigorous testing to confirm it meets Decksaver's stringent standards, assuring you of its quality and dependability. The cover efficiently protects faders, buttons, knobs, and indicators from dust, spills, and unintended impacts, whilst preserving the integrity of your cables and settings.
Endorsed by industry experts and utilised by professionals, the Decksaver cover for the CQ-18T is the preferred selection for safeguarding your equipment, ensuring no compromise on functionality or aesthetics.
Dimensions
Weight: 0.194 kg
Length: 32.9 cm
Width: 23.8 cm
Height: 4.9 cm
Material: Smoked clear polycarbonate
WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.
1 in stock $49.04
Click for better price!
or call +44 20 7424 1960
quote 1009952
quote 1009952
People also bought...
Decksaver Roland Jupiter-XM Dust Cover (synthesiser dust cover)
Cat: 829334 Rel: 08 Jul 21
Smoked polycarbonate cover for Roland Jupiter XM Synthesiser
Notes: Protect tomorrow's future classics, today! Dust, liquid and accidental impact have taken many a good synthesizer down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the Jupiter XM can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, in the studio and onstage.
Length: 58.2cm
Width: 31.7cm
Height: 5.2cm
Material: Smoked polycarbonate
… Read moreLength: 58.2cm
Width: 31.7cm
Height: 5.2cm
Material: Smoked polycarbonate
1 in stock $48.77
Click for better price!
or call +44 20 7424 1960
quote 829334
quote 829334
People also bought...
Decksaver Korg Wavestate/Wavestate MK2/Opsix/Modwave/Modwave MK2 Dust Cover (synthesiser dust cover)
Cat: 858538 Rel: 20 Dec 21
Dust cover designed to fit the Korg Wavestate, Wavestate MK2, Opsix, Modwave or Modwave MK2
Notes: Introducing the Decksaver cover for the Korg Wavestate synthesizer - the ultimate protection for a synth that has the power to revolutionize your music production. When a synth comes along that changes your whole approach to making music, it becomes an invaluable part of your creative process. The Decksaver cover ensures that this remarkable machine remains in pristine condition, safeguarding it from dust, liquid spills, and accidental impacts.
Crafted with precision in the UK, the Decksaver cover is meticulously trimmed to provide a perfect fit for the Korg Wavestate synthesizer. Its design takes into consideration every aspect of the synth, allowing you to keep it fully assembled while providing reliable protection. The cover is manufactured from super durable polycarbonate, a transparent and hard-wearing material that shields the delicate controls and internal components of your Wavestate from potential damage.
The Korg Wavestate is a powerful and innovative synthesizer that opens up new sonic possibilities. Its unique sound engine and vast array of controls allow you to create complex and evolving soundscapes with ease. With the Decksaver cover, you can keep your Wavestate ready for operation at all times, knowing that it is protected from the elements that can compromise its performance.
Transporting your Korg Wavestate is made worry-free with the Decksaver cover. Its slim profile and precise fit enable it to slide effortlessly into a flight case or soft bag, providing maximum protection during transportation. Whether you're taking your Wavestate to a live performance, a recording session, or a jamming session with fellow musicians, the Decksaver cover ensures that your synth arrives safely and securely.
The Decksaver cover not only shields your Korg Wavestate from physical damage but also safeguards its longevity. By preventing dust accumulation and accidental spills, the cover helps maintain the pristine condition of the synth's controls and internal components. Whether you're using your Wavestate at home, in the studio, or on stage, the Decksaver cover ensures that it remains a reliable tool for your musical endeavors.
Invest in the Decksaver cover for your Korg Wavestate and give your synth the protection it deserves. Let your creativity flow freely, knowing that your machine is shielded from harm. With its durable construction, precise fit, and unwavering defense, the Decksaver cover offers peace of mind and ensures that your Korg Wavestate remains an integral part of your musical journey for years to come.
Fits both the MK1 & MK2 Wavestate and Modwave devices.
Key features
Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Keeps settings and controls in place when not in use.
Low profile design enables compatibility with most flight cases and travel bags.
Fits
Wavestate
Wavestate MK2
Modwave
Modwave MK2
Opsix
Dimensions
Weight: 1.25 kg
Length: 57 cm
Width: 34.5 cm
Height: 3.8 cm
… Read moreCrafted with precision in the UK, the Decksaver cover is meticulously trimmed to provide a perfect fit for the Korg Wavestate synthesizer. Its design takes into consideration every aspect of the synth, allowing you to keep it fully assembled while providing reliable protection. The cover is manufactured from super durable polycarbonate, a transparent and hard-wearing material that shields the delicate controls and internal components of your Wavestate from potential damage.
The Korg Wavestate is a powerful and innovative synthesizer that opens up new sonic possibilities. Its unique sound engine and vast array of controls allow you to create complex and evolving soundscapes with ease. With the Decksaver cover, you can keep your Wavestate ready for operation at all times, knowing that it is protected from the elements that can compromise its performance.
Transporting your Korg Wavestate is made worry-free with the Decksaver cover. Its slim profile and precise fit enable it to slide effortlessly into a flight case or soft bag, providing maximum protection during transportation. Whether you're taking your Wavestate to a live performance, a recording session, or a jamming session with fellow musicians, the Decksaver cover ensures that your synth arrives safely and securely.
The Decksaver cover not only shields your Korg Wavestate from physical damage but also safeguards its longevity. By preventing dust accumulation and accidental spills, the cover helps maintain the pristine condition of the synth's controls and internal components. Whether you're using your Wavestate at home, in the studio, or on stage, the Decksaver cover ensures that it remains a reliable tool for your musical endeavors.
Invest in the Decksaver cover for your Korg Wavestate and give your synth the protection it deserves. Let your creativity flow freely, knowing that your machine is shielded from harm. With its durable construction, precise fit, and unwavering defense, the Decksaver cover offers peace of mind and ensures that your Korg Wavestate remains an integral part of your musical journey for years to come.
Fits both the MK1 & MK2 Wavestate and Modwave devices.
Key features
Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Keeps settings and controls in place when not in use.
Low profile design enables compatibility with most flight cases and travel bags.
Fits
Wavestate
Wavestate MK2
Modwave
Modwave MK2
Opsix
Dimensions
Weight: 1.25 kg
Length: 57 cm
Width: 34.5 cm
Height: 3.8 cm
1 in stock $48.52
Click for better price!
or call +44 20 7424 1960
quote 858538
quote 858538
People also bought...
Cat: 969287 Rel: 18 Oct 23
Footswitch designed for the Sidekick Jr.
Notes: External footswitch. Accessory for Sidekick JR.
Use the XT footswitch to control the operation of the modulation section of the Sidekick JR independently. Engage or true bypass the modulation effect.
XT footswitch bypasses the onboard modulation operation assign toggle switch of the Sidekick JR.
Connect to the XT jack input of the pedal.
Passive operation - no power needed for the XT footswitch to operate properly - use standard TS instrument jacks / cable only.
XT footswitch function is not affected by the power-up bypass/engage preset function of the onboard footswitches of Sidekick JR.
Dimensions (W x L x H) : 54 x 51 x 49 mm
Weight 0.91 kg
Made in Greece
… Read moreUse the XT footswitch to control the operation of the modulation section of the Sidekick JR independently. Engage or true bypass the modulation effect.
XT footswitch bypasses the onboard modulation operation assign toggle switch of the Sidekick JR.
Connect to the XT jack input of the pedal.
Passive operation - no power needed for the XT footswitch to operate properly - use standard TS instrument jacks / cable only.
XT footswitch function is not affected by the power-up bypass/engage preset function of the onboard footswitches of Sidekick JR.
Dimensions (W x L x H) : 54 x 51 x 49 mm
Weight 0.91 kg
Made in Greece
1 in stock $48.26
Click for better price!
or call +44 20 7424 1960
quote 969287
quote 969287
People also bought...
ESI cosMik 10 Cardioid Condenser Studio Microphone (condenser studio microphone)
Cat: 896118 Rel: 26 Sep 22
Cardioid condenser studio microphone
Notes: cosMik 10 is a cardioid condenser microphone that can be universally used for vocals, acoustic guitars, in front of a guitar cabinet and much more.
Designed to always give dynamic professional studio quality results, cosMik 10 provides world class sound to capture musical details, harmonics, and subtle nuances that get lost easily with many comparable microphones. The low self-noise allows you to capture the whole dynamic range with exceptional detail, making this microphone the universal solution for any recording studio.
The cosMik 10 with its unique stylish and yet compact body is provided with a table stand, windshield shield foam and an XLR cable so that you can get started right away.
cosMik 10 is available on its own as well as in our U22 XT cosMik Set studio recording bundle.
Features/specifications
Condenser studio microphone
Cardioid polar pattern
Special 1" diaphragm size
30Hz - 18kHz frequency response
> 132dB dynamic range
135dB max. SPL
100 ohm output impedance
5dB self noise (A weighted)
Requires +48V phantom power
XLR connector, cable included
Table stand included
Windshield foam included
Weight: around 160g
… Read moreDesigned to always give dynamic professional studio quality results, cosMik 10 provides world class sound to capture musical details, harmonics, and subtle nuances that get lost easily with many comparable microphones. The low self-noise allows you to capture the whole dynamic range with exceptional detail, making this microphone the universal solution for any recording studio.
The cosMik 10 with its unique stylish and yet compact body is provided with a table stand, windshield shield foam and an XLR cable so that you can get started right away.
cosMik 10 is available on its own as well as in our U22 XT cosMik Set studio recording bundle.
Features/specifications
Condenser studio microphone
Cardioid polar pattern
Special 1" diaphragm size
30Hz - 18kHz frequency response
> 132dB dynamic range
135dB max. SPL
100 ohm output impedance
5dB self noise (A weighted)
Requires +48V phantom power
XLR connector, cable included
Table stand included
Windshield foam included
Weight: around 160g
1 in stock $48.15
People also bought...
Decksaver Moog Subsequent 25 & Sub Phatty Soft-Fit Dust Cover (synthesiser dust cover)
Cat: 829326 Rel: 09 Jul 21
Smoked polycarbonate cover for Moog Subsequent 25 & Sub Phatty synthesisers
Notes: Sometimes a synth comes along which changes your whole approach to making music - these amazing machines must be protected! Dust, liquid and accidental impact have taken many a good analogue synthesizer down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Subsequent 25/Sub Phatty can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, in the studio and onstage. Decksaver's Subsequent 25/Sub Phatty cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers.
Length: 52.4cm
Width: 32.3cm
Height: 6.7cm
Material: Smoked polycarbonate
… Read moreLength: 52.4cm
Width: 32.3cm
Height: 6.7cm
Material: Smoked polycarbonate
! low stock $48.00
Click for better price!
or call +44 20 7424 1960
quote 829326
quote 829326
People also bought...
Decksaver Erica Synths Perkons HD-01 Soft-Fit Dust Cover (drum machine dust cover)
Cat: 908470 Rel: 23 Jan 23
Smoked polycarbonate cover for Erica Synths Perkons HD-01
Notes: The versatile Erica Synths Perkons HD-01 is a sight to behold and hear with its highly crafted sound engine and features. It's a hybrid of a drum machine and synthesizer with a powerful set of four sonically versatile hybrid voices. The plethora of 80 buttons and over 40 knobs are all there to create a unique sound texture.
With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.
Working with this wonderful unit, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Erica device.
With years of experience working with plastics, Decksaver have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.
Utilising our Soft-fit inserts, you can be sure of a great fit to your device.
Decksaver's super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.
Dressing your unit in a Decksaver cover should mean you will never have to worry about your Perkons getting damaged at home, in the studio, or at the gig.
Dimensions
Weight: 0.702 kg
Length: 46.9 cm
Width: 32.6 cm
Material: Smoked clear polycarbonate.
… Read moreWith their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.
Working with this wonderful unit, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Erica device.
With years of experience working with plastics, Decksaver have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.
Utilising our Soft-fit inserts, you can be sure of a great fit to your device.
Decksaver's super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.
Dressing your unit in a Decksaver cover should mean you will never have to worry about your Perkons getting damaged at home, in the studio, or at the gig.
Dimensions
Weight: 0.702 kg
Length: 46.9 cm
Width: 32.6 cm
Material: Smoked clear polycarbonate.
1 in stock $48.00
Click for better price!
or call +44 20 7424 1960
quote 908470
quote 908470
People also bought...
Decksaver UDO Audio SUPER 6 Desktop Dust Cover (synthesiser dust cover)
Cat: 908482 Rel: 30 Jan 23
Smoked polycarbonate cover for UDO Audio Super 6 Desktop
Notes: Coming out of Bristol, England, the UDO Super 6 Desktop is a fully-featured analogue-hybrid 12 voice synthesizer that packs the same punch as the original Super 6 but with the benefits of a more compact footprint.
The magnificent vibrant warm sounds that come from the device have to be heard to be believed.
With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.
Working with these wonderful units, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting UDO device.
With years of experience working with plastics, Decksaver have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.
The super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.
Dressing your unit in a Decksaver cover should mean you will never have to worry about your Super 6 getting damaged at home, in the studio, or at the gig.
Dimensions
Weight: 0.686 kg
Length: 46 cm
Width: 30.3 cm
Height: 5.2 cm
… Read moreThe magnificent vibrant warm sounds that come from the device have to be heard to be believed.
With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.
Working with these wonderful units, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting UDO device.
With years of experience working with plastics, Decksaver have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.
The super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.
Dressing your unit in a Decksaver cover should mean you will never have to worry about your Super 6 getting damaged at home, in the studio, or at the gig.
Dimensions
Weight: 0.686 kg
Length: 46 cm
Width: 30.3 cm
Height: 5.2 cm
1 in stock $48.00
Click for better price!
or call +44 20 7424 1960
quote 908482
quote 908482
People also bought...
Decksaver Waldorf Iridium/M/Kyra Dust Cover (synthesiser dust cover)
Cat: 908486 Rel: 07 Dec 22
Smoked polycarbonate cover for Waldorf Iridium/M/Kyra
Notes: The Waldorf Iridium, M & KYRA machines are gloriously high-quality devices, with each one having its own unique synth capabilities.
Just on the base level, the Kyra has a 128-Voice virtual analog synth with 8 parts, whilst the Iridium has a 16-Voice Synthesizer and the M has an 8-Voice Polyphonic Wavetable Synthesizer.
That is just the surface level of musical power they have.
With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.
Working with these wonderful units, we have designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of these exciting Waldorf devices.
With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.
This super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.
Dressing your Waldorf in a Decksaver cover should mean you will never have to worry about your Iridium, M or KYRA getting damaged at home, in the studio, or at the gig.
Fits:
Iridium
M
Kyra
Dimensions:
Weight: 0.665 kg
Length: 44.5 cm
Width: 30.8 cm
Height: 4.5 cm
Material: Smoked clear polycarbonate.
… Read moreJust on the base level, the Kyra has a 128-Voice virtual analog synth with 8 parts, whilst the Iridium has a 16-Voice Synthesizer and the M has an 8-Voice Polyphonic Wavetable Synthesizer.
That is just the surface level of musical power they have.
With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.
Working with these wonderful units, we have designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of these exciting Waldorf devices.
With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.
This super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.
Dressing your Waldorf in a Decksaver cover should mean you will never have to worry about your Iridium, M or KYRA getting damaged at home, in the studio, or at the gig.
Fits:
Iridium
M
Kyra
Dimensions:
Weight: 0.665 kg
Length: 44.5 cm
Width: 30.8 cm
Height: 4.5 cm
Material: Smoked clear polycarbonate.
2 in stock $48.00
Click for better price!
or call +44 20 7424 1960
quote 908486
quote 908486
People also bought...
Moog Subsequent 25 Ballistic Cordura Dust Cover (black) (synthesiser dust cover)
Cat: 926168 Rel: 07 Mar 23
Protect your Moog Subsequent 25 when not in use.
Notes: Protect your Moog Subsequent 25 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.
Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 25 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access
… Read moreCustom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 25 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access
1 in stock $47.60
People also bought...
LOCI D Dinky Versatile Expandable Modular Desktop Stand (black) (modular desktop stand)
Cat: 933564 Rel: 14 Mar 23
Versatile expandable modular desktop stand.
Notes: Loci Dinky
A great modular stand suitable for smaller items such as tablets all the way up to desktop modules.
Assembled in seconds
Super strong desktop stand
Precision laser cut from 6mm oak veneer
Beautifully detailed
Non-slip bands
Packs flat to slide in your case
… Read moreA great modular stand suitable for smaller items such as tablets all the way up to desktop modules.
Assembled in seconds
Super strong desktop stand
Precision laser cut from 6mm oak veneer
Beautifully detailed
Non-slip bands
Packs flat to slide in your case
1 in stock $47.49
Click for better price!
or call +44 20 7424 1960
quote 933564
quote 933564
People also bought...
iConnectivity mioXC 1-In/1-Out MIDI-To-USB-C Interface (1x1 MIDI to USB-C interface)
Cat: 825879 Rel: 08 Nov 21
USB Type-C 1x1 MIDI-to-USB cable interface for Mac, PC, iOS, or Android
Notes: mioXC - The USB Type-C 1x1 MIDI interface for Mac, PC, iOS, or Android
Tiny in size and price, yet big on connectivity! mioXC is a pocket-sized powerhouse! mioXC is a fuss-free and simple 1x1, 16 channel MIDI interface you can use to connect your MIDI compatible gear. Whether you have a controller keyboard, synthesizer, drum machine or whatever; mioXC lets you connect them to your Mac, PC, iOS, or Android computing device.
What Makes mioXC Unique?
Even the most basic tasks need to be done right; it's surprising how many of iConnectivity's competitors' interfaces get it wrong. mioXC has been engineered, from the ground up to, to be the interface that its manufacturers would want to use themselves.
Modern USB Connectivity - Equipped with both USB Type-C and USB Type-A connectivity, mioXC lets you enjoy easy connectivity with most modern computing devices.
Driver Compatibility - Interfaces that use their own drivers have to be updated all the time, or they stop working properly. Likewise some designs were USB Class-Compliant years ago, but today they aren't anymore. iConnectivity's drivers have been engineered to today's strict guidelines, and keep them updated, to ensure compatibility for years to come.
MIDI Management - iConnectivity interfaces deliver MIDI reliably no matter what. When the MIDI data-stream gets heavy, these interfaces plough on where other interfaces choke.
Rock-Solid Electrical Design
- Some MIDI interfaces introduce noise, or worse, crash your system. You'll never get that from an iConnectivity interface.
Performance Optimized - A MIDI interface that works too slowly is useless. mioXC uses a powerful 32-bit ARM Cortex processor, ensuring dense MIDI and SysEx streams are managed with ease.
The iConnectivity Advantage: iConnectivity's name on your interface means that time was taken to do it right, whether it's the simple 1 x 1 models to iConnectivity's uniquely sophisticated high-end interfaces.
What's in the box
One mioXC MIDI Interface.
One USB Type-C to USB Type-A adapter
Macintosh
Mac OS X
1 free USB port
Windows
Windows 7 or later
1 free USB port
iOS
iOS 8 or greater*
CoreMIDI compatible app
*Apple Lightning to USB Camera adapter required for use with Lightning equipped iOS devices (adapter not included)
Android
Android 8.0 or higher with USB-C connector
… Read moreTiny in size and price, yet big on connectivity! mioXC is a pocket-sized powerhouse! mioXC is a fuss-free and simple 1x1, 16 channel MIDI interface you can use to connect your MIDI compatible gear. Whether you have a controller keyboard, synthesizer, drum machine or whatever; mioXC lets you connect them to your Mac, PC, iOS, or Android computing device.
What Makes mioXC Unique?
Even the most basic tasks need to be done right; it's surprising how many of iConnectivity's competitors' interfaces get it wrong. mioXC has been engineered, from the ground up to, to be the interface that its manufacturers would want to use themselves.
Modern USB Connectivity - Equipped with both USB Type-C and USB Type-A connectivity, mioXC lets you enjoy easy connectivity with most modern computing devices.
Driver Compatibility - Interfaces that use their own drivers have to be updated all the time, or they stop working properly. Likewise some designs were USB Class-Compliant years ago, but today they aren't anymore. iConnectivity's drivers have been engineered to today's strict guidelines, and keep them updated, to ensure compatibility for years to come.
MIDI Management - iConnectivity interfaces deliver MIDI reliably no matter what. When the MIDI data-stream gets heavy, these interfaces plough on where other interfaces choke.
Rock-Solid Electrical Design
- Some MIDI interfaces introduce noise, or worse, crash your system. You'll never get that from an iConnectivity interface.
Performance Optimized - A MIDI interface that works too slowly is useless. mioXC uses a powerful 32-bit ARM Cortex processor, ensuring dense MIDI and SysEx streams are managed with ease.
The iConnectivity Advantage: iConnectivity's name on your interface means that time was taken to do it right, whether it's the simple 1 x 1 models to iConnectivity's uniquely sophisticated high-end interfaces.
What's in the box
One mioXC MIDI Interface.
One USB Type-C to USB Type-A adapter
Macintosh
Mac OS X
1 free USB port
Windows
Windows 7 or later
1 free USB port
iOS
iOS 8 or greater*
CoreMIDI compatible app
*Apple Lightning to USB Camera adapter required for use with Lightning equipped iOS devices (adapter not included)
Android
Android 8.0 or higher with USB-C connector
! low stock $47.23
Click for better price!
or call +44 20 7424 1960
quote 825879
quote 825879
People also bought...
Decksaver Behringer X-Touch Dust Cover (MIDI controller dust cover)
Cat: 879535 Rel: 11 Jul 22
Smoked polycarbonate cover for Behringer X-Touch
Notes: Since its beginning, Behringer has entered the music equipment world with a bang, constantly releasing desirable and value-led gear across the music spectrum such as DJ mixers, synthesisers, drum machines and interfaces - the list goes on.
Close to the top of Decksaver's customer request list, the X-Touch is a universal remote control for DAWs, which allows you to control and fine-tune any track or recording through the use of its 9 fully automated and touch-sensitive 100mm motorized faders.
While the X-Touch might be the perfect controller for your Ableton, Logic or the like, it doesn't have the perfect protection against damage and any other bad mishaps.
To fix this problem Decksaver have carefully crafted and manufactured right here in the UK, a cover to protect the Behringer X-Touch. This super durable polycarbonate lid features extreme durability and offers the highest degree of protection against spills, dust and accidental impact.
Weight: 1.1kg
Length: 45.4cm
Width: 31cm
Height: 4.4cm
Material: Smoked clear polycarbonate
… Read moreClose to the top of Decksaver's customer request list, the X-Touch is a universal remote control for DAWs, which allows you to control and fine-tune any track or recording through the use of its 9 fully automated and touch-sensitive 100mm motorized faders.
While the X-Touch might be the perfect controller for your Ableton, Logic or the like, it doesn't have the perfect protection against damage and any other bad mishaps.
To fix this problem Decksaver have carefully crafted and manufactured right here in the UK, a cover to protect the Behringer X-Touch. This super durable polycarbonate lid features extreme durability and offers the highest degree of protection against spills, dust and accidental impact.
Weight: 1.1kg
Length: 45.4cm
Width: 31cm
Height: 4.4cm
Material: Smoked clear polycarbonate
2 in stock $47.23
Click for better price!
or call +44 20 7424 1960
quote 879535
quote 879535
People also bought...
Decksaver Behringer Eurorack Go Dust Cover (modular synthesiser case dust cover)
Cat: 862508 Rel: 10 Mar 22
Smoked polycarbonate cover for Behringer Eurorack Go
Notes: The tools we use to compose and produce music are dear to our hearts.
Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
… Read moreDust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.
Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.
This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.
Shields delicate controls and internal components from damage at home, on the road and on stage.
Dimensions
Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm
2 in stock $47.23
Click for better price!
or call +44 20 7424 1960
quote 862508
quote 862508
People also bought...
Citronic USB Audio Interface: 2 Microphone + 1 Instrument (USB 2+1 audio interface)
Cat: 922286 Rel: 19 Jan 23
Desktop USB soundcard for a computer-based recording studio.
Notes: Desktop USB soundcard for a computer-based recording studio. Featuring 2 independent microphone inputs on XLR/jack sockets and a separate 6.3mm instrument input. Each input has a gain control and there is an optional echo effect with separate control. Monitoring is via a stereo 6.3mm headphone jack or L+R RCA line output on the rear of the unit for connecting monitor speakers. Power to the interface and two-way digital audio is connected via a USB type-C socket at the rear. Simple yet versatile operation for project studios and DAW recording setups.
Power supply: 5Vdc (from USB)
Connection: USB type-C
Controls: Mic1, Mic2, Inst3, Effect, Monitor
Input connections: 2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power: +48V switchable to XLR inputs
Frequency response: 10Hz - 30kHz (-0.5dB)
Input impedance: instrument1M Ohm
Input impedance: mic3k Ohm
Max. input sound level: Mic or Instrument +2dBu, Line +22dBu
Dynamic range: 100dB (A-weighted)
Sampling format: 48kHz, 16-bit
Monitor outputs: Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions: 160 x 110 x 57mm
Weight: 529g
In the box
The box for this item contains:
USB2+1 Audio Interface
1.5m USB C to A lead
… Read morePower supply: 5Vdc (from USB)
Connection: USB type-C
Controls: Mic1, Mic2, Inst3, Effect, Monitor
Input connections: 2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power: +48V switchable to XLR inputs
Frequency response: 10Hz - 30kHz (-0.5dB)
Input impedance: instrument1M Ohm
Input impedance: mic3k Ohm
Max. input sound level: Mic or Instrument +2dBu, Line +22dBu
Dynamic range: 100dB (A-weighted)
Sampling format: 48kHz, 16-bit
Monitor outputs: Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions: 160 x 110 x 57mm
Weight: 529g
In the box
The box for this item contains:
USB2+1 Audio Interface
1.5m USB C to A lead
2 in stock $47.08
People also bought...
ESI U22 XT 2x2 24-Bit/96kHz USB 2.0 Audio Interface (2x2 USB audio interface)
Cat: 635315 Rel: 26 Sep 22
2-input/2-output 24-bit/96kHz USB 2.0 audio interface
Notes: U22 XT offers a maximum of flexibility as fully bus powered USB device with pristine professional 24-bit audio quality.
The interface features 2 analog input and 2 analog output channels with RCA line inputs, a microphone preamplifier with XLR input and support for +48V phantom power, a Hi-Z instrument input for guitars, a high quality headphone output and TRS line outputs. Master and headphone volume as well as monitoring are controlled on the front panel.
On the software side, U22 XT provides low latency drivers with support for WDM, ASIO 2.0 and CoreAudio based on our EWDM and DirectWIRE technology.
Included with U22 XT is the Bitwig Studio 8-Track software, the trim and effective digital audio workstation to start producing, performing, and designing audio like a pro. With Bitwig Studio 8-Track, you can start working right out of the box without other additional software. Record and arrange, improvise and perform, or do it all at once, with this professional solution developed by musicians, for musicians.
If you're looking for a really powerful USB audio solution for your PC or Mac to start working out of the box, then U22 XT is for you!
U22 XT is also available as a complete recording bundle with a microphone and headphone, the U22 XT cosMik Set.
Features
2 input / 2 output 24-bit / 96kHz USB 2.0 Audio Interface
microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered
max. 24bit/96kHz
line input with RCA connectors
line output with balanced 1/4" TRS connectors
headphone output with 1/4" connector
ADC with 102dB(a) dynamic range
DAC with 108dB(a) dynamic range
input / output monitoring controlled on front panel
master volume control on front panel
supports Windows Vista, Windows 7, Windows 8.1, Windows 10 and Windows 11 with ASIO 2.0, MME, WDM and DirectSound incl. DirectWIRE support
supports Mac OS X (10.7 and above) via the native CoreAudio USB audio driver from Apple (no driver install required)
supports many Linux distributions via the ALSA USB audio class support
includes Bitwig Studio 8-Track digital audio workstation software
includes license of inTone 2 ESI Edition from Audified
dimensions roughly 17.5cm x 12.0cm x 4.5cm
… Read moreThe interface features 2 analog input and 2 analog output channels with RCA line inputs, a microphone preamplifier with XLR input and support for +48V phantom power, a Hi-Z instrument input for guitars, a high quality headphone output and TRS line outputs. Master and headphone volume as well as monitoring are controlled on the front panel.
On the software side, U22 XT provides low latency drivers with support for WDM, ASIO 2.0 and CoreAudio based on our EWDM and DirectWIRE technology.
Included with U22 XT is the Bitwig Studio 8-Track software, the trim and effective digital audio workstation to start producing, performing, and designing audio like a pro. With Bitwig Studio 8-Track, you can start working right out of the box without other additional software. Record and arrange, improvise and perform, or do it all at once, with this professional solution developed by musicians, for musicians.
If you're looking for a really powerful USB audio solution for your PC or Mac to start working out of the box, then U22 XT is for you!
U22 XT is also available as a complete recording bundle with a microphone and headphone, the U22 XT cosMik Set.
Features
2 input / 2 output 24-bit / 96kHz USB 2.0 Audio Interface
microphone preamp with +48V phantom power support
Hi-Z instrument input with 1/4" connector
USB bus powered
max. 24bit/96kHz
line input with RCA connectors
line output with balanced 1/4" TRS connectors
headphone output with 1/4" connector
ADC with 102dB(a) dynamic range
DAC with 108dB(a) dynamic range
input / output monitoring controlled on front panel
master volume control on front panel
supports Windows Vista, Windows 7, Windows 8.1, Windows 10 and Windows 11 with ASIO 2.0, MME, WDM and DirectSound incl. DirectWIRE support
supports Mac OS X (10.7 and above) via the native CoreAudio USB audio driver from Apple (no driver install required)
supports many Linux distributions via the ALSA USB audio class support
includes Bitwig Studio 8-Track digital audio workstation software
includes license of inTone 2 ESI Edition from Audified
dimensions roughly 17.5cm x 12.0cm x 4.5cm
1 in stock $46.78
People also bought...
Synths & Wood Roland Aira Compact S-1/J-6/T-8/E-4 Triple Stand (MDF) (synthesiser stand)
Cat: 957949 Rel: 19 Jul 23
Stand designed to support 3 Roalnd AIRA compact synthesisers.
Notes: Triple MDF stand for the Roland Aira Compact Range S1, E4, J6 & T8
This stand has been precision machined from MDF and fits any 3 of the Roland Aira Compact models.
Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.
The units are held in place into a recess into the side panels so are rock solid once assembled.
Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.
A single version and triple versions are also available.
… Read moreThis stand has been precision machined from MDF and fits any 3 of the Roland Aira Compact models.
Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.
The units are held in place into a recess into the side panels so are rock solid once assembled.
Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.
A single version and triple versions are also available.
1 in stock $46.70
Click for better price!
or call +44 20 7424 1960
quote 957949
quote 957949
People also bought...
CoverUp Pro Native Instruments Maschine MK3 Desktop Stand (groovebox stand)
Cat: 959744 Rel: 23 Oct 23
Stand designed for Native Instruments Maschine MK3.
Notes: One of Native's latest creations has its ergonomic stand ready for studying.
Now you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.
At the base, there are 3m rubber feet so that the equipment does not move at any time.
Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm
… Read moreNow you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.
At the base, there are 3m rubber feet so that the equipment does not move at any time.
Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm
1 in stock $46.69
Click for better price!
or call +44 20 7424 1960
quote 959744
quote 959744
People also bought...
CoverUp Pro Roland MC-707 Desktop Stand (drum machine stand)
Cat: 960866 Rel: 15 Nov 23
Stand designed for the Roland MC-707.
Notes: The latest addition to the Roland family has its exclusive stand.
Specially designed for the Roland MC-707s.
Taking advantage of the shape of its cabinet to securely hold the equipment.
Achieving a very comfortable position during use.
These stands are lightweight, detachable, and take up very little space, perfect for live performers.
In the studio, they save space and improve the working position.
All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.
With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland MC-707s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland MC-707s.
… Read moreSpecially designed for the Roland MC-707s.
Taking advantage of the shape of its cabinet to securely hold the equipment.
Achieving a very comfortable position during use.
These stands are lightweight, detachable, and take up very little space, perfect for live performers.
In the studio, they save space and improve the working position.
All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.
With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland MC-707s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland MC-707s.
1 in stock $46.44
Click for better price!
or call +44 20 7424 1960
quote 960866
quote 960866
People also bought...
CoverUp Pro Roland TR-8S Desktop Stand (drum machine/groovebox stand)
Cat: 959749 Rel: 14 Nov 23
Stand designed for the Roland TR-8S.
Notes: The latest addition to the Roland TR family has its exclusive stand.
Specially designed for the Roland TR-8s.
Taking advantage of the shape of its cabinet to securely hold the equipment.
Achieving a very comfortable position during use.
These stands are lightweight, detachable, and take up very little space, perfect for live performers.
In the studio, they save space and improve the working position.
All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.
With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland TR-8s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland TR-8s.
Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm
Models: TR8S, MC707
… Read moreSpecially designed for the Roland TR-8s.
Taking advantage of the shape of its cabinet to securely hold the equipment.
Achieving a very comfortable position during use.
These stands are lightweight, detachable, and take up very little space, perfect for live performers.
In the studio, they save space and improve the working position.
All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.
With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland TR-8s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland TR-8s.
Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm
Models: TR8S, MC707
1 in stock $46.44
Click for better price!
or call +44 20 7424 1960
quote 959749
quote 959749
People also bought...
Decksaver Allen & Heath CQ-12T Dust Cover (digital studio mixer dust cover)
Cat: 1009950 Rel: 19 Apr 24
Dust cover designed to fit the Allen & Heath CQ-12T
Notes: Introducing the Decksaver cover, meticulously crafted for the Allen & Heath CQ-12T mixer. This cover, engineered with exacting precision and made from superior-grade material, offers a bespoke-fit solution that is unrivalled. It provides your CQ-12T with unparalleled defence against common hazards like dust, liquid spills, and accidental knocks or impacts.
Understanding the significance of your mixer as a vital component of your audio setup, this Decksaver cover has been designed to ensure your CQ-12T remains in pristine condition, regardless of the setting. Whether in the studio, at a live performance, or during transportation, the cover acts as a reliable shield, preserving the functionality and aesthetics of your mixer.
Its sleek, transparent design not only delivers robust protection but also showcases the sophisticated build of your CQ-12T, integrating flawlessly with its professional appearance. The precise fit ensures that every knob, fader, screen, and input is covered, yet remains easily accessible for quick setups and teardowns. This design principle means that you don't have to choose between safety and style.
Furthermore, the Decksaver cover for the CQ-12T is lightweight and durable, making it an ideal accessory for DJs on the move. It adds an additional layer of security against the challenges of travel and frequent use, protecting your investment from the wear and tear of the road.
With this Decksaver cover, you acquire not just a protective measure, but a declaration of professionalism. It reflects your dedication to quality and the importance you place on keeping your equipment in its best condition. Embrace the peace of mind and confidence that comes with knowing your Allen & Heath CQ-12T is well-protected, allowing you to concentrate on what you do best; creating and performing music.
Weight: 0.151 kg
Length: 27.4 cm
Width: 23.7 cm
Height: 4 cm
Material: Smoked clear polycarbonate.
Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.
… Read moreUnderstanding the significance of your mixer as a vital component of your audio setup, this Decksaver cover has been designed to ensure your CQ-12T remains in pristine condition, regardless of the setting. Whether in the studio, at a live performance, or during transportation, the cover acts as a reliable shield, preserving the functionality and aesthetics of your mixer.
Its sleek, transparent design not only delivers robust protection but also showcases the sophisticated build of your CQ-12T, integrating flawlessly with its professional appearance. The precise fit ensures that every knob, fader, screen, and input is covered, yet remains easily accessible for quick setups and teardowns. This design principle means that you don't have to choose between safety and style.
Furthermore, the Decksaver cover for the CQ-12T is lightweight and durable, making it an ideal accessory for DJs on the move. It adds an additional layer of security against the challenges of travel and frequent use, protecting your investment from the wear and tear of the road.
With this Decksaver cover, you acquire not just a protective measure, but a declaration of professionalism. It reflects your dedication to quality and the importance you place on keeping your equipment in its best condition. Embrace the peace of mind and confidence that comes with knowing your Allen & Heath CQ-12T is well-protected, allowing you to concentrate on what you do best; creating and performing music.
Weight: 0.151 kg
Length: 27.4 cm
Width: 23.7 cm
Height: 4 cm
Material: Smoked clear polycarbonate.
Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.
1 in stock $46.44
Click for better price!
or call +44 20 7424 1960
quote 1009950
quote 1009950
People also bought...
CoverUp Pro Akai Professional APC40 MKII Elevated Desktop Stand (MIDI controller stand)
Cat: 959727 Rel: 24 Oct 23
Elevated stand designed for the Akai Professional APC40 MKII.
Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.
The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.
Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.
Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.
In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.
… Read moreThe stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.
Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.
Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.
In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.
1 in stock $46.18
Click for better price!
or call +44 20 7424 1960
quote 959727
quote 959727
People also bought...
CoverUp Pro Akai Professional APC40 MKII Desktop Stand (MIDI controller stand)
Cat: 959728 Rel: 20 Feb 24
Stand designed for the Akai Professional APC40 MKII.
Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.
The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.
Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.
Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.
In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.
… Read moreThe stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.
Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.
Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.
In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.
1 in stock $46.18
Click for better price!
or call +44 20 7424 1960
quote 959728
quote 959728
People also bought...
Meng Qi Honey Mini Touch-Based Noise Instrument (noise instrument)
Cat: 1008035 Rel: 10 Apr 24
Mini touch-based noise instrument
Notes: Honey is a palm-sized, touch-based noise instrument based on the bytebeat principle. It runs on a single AAA battery and emits sound through a speaker. It doesn't have an audio jack. It creates dynamic sounds by manipulating variables and mathematical operations through touch.
The internal dynamic equations consist of five variables and four operations, with six possible operators for each operation. They are constantly changing and forming new equations, creating chaotic randomness.
If the unit does not respond correctly, the battery needs to be replaced.
Powered by one AAA battery
… Read moreThe internal dynamic equations consist of five variables and four operations, with six possible operators for each operation. They are constantly changing and forming new equations, creating chaotic randomness.
If the unit does not respond correctly, the battery needs to be replaced.
Powered by one AAA battery
6 in stock $45.93
Click for better price!
or call +44 20 7424 1960
quote 1008035
quote 1008035
People also bought...
Joranalogue 90cm Premium Patch Cables With 3.5mm Mono Mini-Jack Connectors (white, pack of 8) (patch cables)
Cat: 981074 Rel: 16 Nov 23
3.5mm mono mini-jack connectors premium patch cables
Notes: What started as a simple plan to develop a new line of patch cables, quickly became an engineering feat in typical Joranalogue fashion. After countless hours of stripping cables, benchmarking crosstalk and high frequency performance, and designing in-house cable testing tools, Patch is the result of these efforts.
Patch is a series of top-quality patch cables for the discerning modularist, available in black and white, and a variety of lengths. Constructed using a custom-made coaxial base cable and over moulded mini-jack plugs, protected by unique laser-cut aluminium shells, these Eurorack cables are designed to outlast and outperform.
Lengths 15, 30, 60 and 90 cm are available in 8-packs, while the extra-long 150 cm cables are supplied in 4-packs.
Premium patch cables with 3.5 mm mono mini-jack connectors for Eurorack modular synthesiser use.
Engineered for audio, CV as well as analogue video signals.
Unique anodised aluminium shells and heavy duty bend reliefs for long life span.
7 inner signal and 40 outer shield conductors of 100 % ultra-pure oxygen free copper.
Extra-flexible PVC outer sleeve: satisfying 'droop' without crinkles.
Safely packaged in a reusable cotton bag with branded hook-and-loop cable tie included.
Incredibly fun to patch with. (Seriously!)
Designed in Belgium; made in China.
… Read morePatch is a series of top-quality patch cables for the discerning modularist, available in black and white, and a variety of lengths. Constructed using a custom-made coaxial base cable and over moulded mini-jack plugs, protected by unique laser-cut aluminium shells, these Eurorack cables are designed to outlast and outperform.
Lengths 15, 30, 60 and 90 cm are available in 8-packs, while the extra-long 150 cm cables are supplied in 4-packs.
Premium patch cables with 3.5 mm mono mini-jack connectors for Eurorack modular synthesiser use.
Engineered for audio, CV as well as analogue video signals.
Unique anodised aluminium shells and heavy duty bend reliefs for long life span.
7 inner signal and 40 outer shield conductors of 100 % ultra-pure oxygen free copper.
Extra-flexible PVC outer sleeve: satisfying 'droop' without crinkles.
Safely packaged in a reusable cotton bag with branded hook-and-loop cable tie included.
Incredibly fun to patch with. (Seriously!)
Designed in Belgium; made in China.
1 in stock $45.93
Click for better price!
or call +44 20 7424 1960
quote 981074
quote 981074
People also bought...
Synths & Wood ASM Hydrasynth Desktop Module Dual Angled End Cheeks (ASM Hydrasynth Module end cheeks)
Cat: 833574 Rel: 18 Jun 21
Solid oak dual angle stand for ASM Hydrasynth Desktop Module
Notes: These solid oak end cheeks have been precision-machined and hand finished from FSC certified European Oak.
These cheeks have the option of 2 different working angles and heights to suit your needs.
The stand is assembled by removing the original aluminium end cheeks and replacing them with these, using the supplied 6x screws.
Please note: you will get only the 2x oak end cheeks, so you must purchase your own ASM Hydrasynth.
The item will need assembly as it is sent flat packed, all screws are provided this includes small rubber feet.
… Read moreThese cheeks have the option of 2 different working angles and heights to suit your needs.
The stand is assembled by removing the original aluminium end cheeks and replacing them with these, using the supplied 6x screws.
Please note: you will get only the 2x oak end cheeks, so you must purchase your own ASM Hydrasynth.
The item will need assembly as it is sent flat packed, all screws are provided this includes small rubber feet.
1 in stock $45.67
Click for better price!
or call +44 20 7424 1960
quote 833574
quote 833574
People also bought...
UDG Ultimate Height Adjustable Laptop/DJ Controller/Production Gear Stand (white) *** LIMITED TIME OFFER WHILE STOCKS LAST *** (laptop/DJ controller/production gear stand)
Cat: 864891 Rel: 18 Feb 22
Stand designed to fit laptops up to 19", iPad, DJ or MIDI controllers, mixer or production gear.
Notes: The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360- well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear.
Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.lbs
Specifications
Colour: White
Weight: 1,85 kg / 4.07 lbs
Outer Dimensions (W x H x D)
Folded: 28.0 x 27.3 x 3.5 cm | 11.0 x 10.7 x 1.4 inch - Unfolded: 28.0 x 27.3 x 26.5 - 38.0 cm | 11.0 x 10.7 x 10.4 - 14.9 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Z-style set-up position to accommodate heavier production gear
Airflow constructed tray prevents equipment from overheating
Rugged, durable metal construction, anti-scratch resistant powder coating
Extras
Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
360 degree rotatable laptop tray
2-clicks quick-release mechanism for easy assembly and breakdown
No loose parts
Protective transportation sleeve included
Fits:
Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear. Maximum load: 15.0 kg / 33.06 lbs
… Read moreIts 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.lbs
Specifications
Colour: White
Weight: 1,85 kg / 4.07 lbs
Outer Dimensions (W x H x D)
Folded: 28.0 x 27.3 x 3.5 cm | 11.0 x 10.7 x 1.4 inch - Unfolded: 28.0 x 27.3 x 26.5 - 38.0 cm | 11.0 x 10.7 x 10.4 - 14.9 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Z-style set-up position to accommodate heavier production gear
Airflow constructed tray prevents equipment from overheating
Rugged, durable metal construction, anti-scratch resistant powder coating
Extras
Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
360 degree rotatable laptop tray
2-clicks quick-release mechanism for easy assembly and breakdown
No loose parts
Protective transportation sleeve included
Fits:
Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear. Maximum load: 15.0 kg / 33.06 lbs
1 in stock $45.66
People also bought...
Analog Cases Critter & Guitari Organelle M Glide Case (synthesiser case)
Cat: 836928 Rel: 15 Sep 21
GLIDE case for the Critter & Guitari Organelle M
Notes: The Critter & Guitari Organelle M is an extremely mobile machine. This GLIDE case has been custom molded to fit and protect your Organelle M when you're on the go.
Description:
Made to easily fit into a backpack or suitcase, this case provides real protection. The exterior is rigid, and is topped with waterproof faux leather, while the interior features a soft velvet lining. There's even an interior pocket for storing your cables. With a snug fit, you won't need to worry that your Organelle M could be dislodged during transport.
Specifications:
Perfect fit for your Critter & Guitari Organelle M
Premium faux leather exterior and soft velvet lining
Mesh compartment for holding cables
Interior dimensions: 13.5 x 3.5 x 2.5 inches
… Read moreDescription:
Made to easily fit into a backpack or suitcase, this case provides real protection. The exterior is rigid, and is topped with waterproof faux leather, while the interior features a soft velvet lining. There's even an interior pocket for storing your cables. With a snug fit, you won't need to worry that your Organelle M could be dislodged during transport.
Specifications:
Perfect fit for your Critter & Guitari Organelle M
Premium faux leather exterior and soft velvet lining
Mesh compartment for holding cables
Interior dimensions: 13.5 x 3.5 x 2.5 inches
1 in stock $45.66
Click for better price!
or call +44 20 7424 1960
quote 836928
quote 836928
People also bought...
Analog Cases Beyerdynamic/Sennheiser/Shure/Sony/Audio-Technica Studio Headphones Pulse Case (studio headphones case)
Cat: 883007 Rel: 09 Aug 22
Pulse case designed for studio headphones!
Notes: Keep your headphones safe for many sessions and gigs to come with the PULSE Case For Studio Headphones! This durable molded case can fit any model of professional studio monitor headphones from Beyerdynamic, Sennheiser, Shure, Sony, Audio-Technica, and other leading brands. Like all PULSE cases, this case is compact and ultra-lightweight, so it's easy to travel with.
Description
The PULSE Case for Studio headphones is made from durable and lightweight EVA, designed to protect and preserve your headphones during transport. EVA is often used in sports equipment for its shock-absorbing capabilities, so you be confident your studio headphones will be well protected. The case's interior is lined with soft velvet, which will help prevent scratches and any snags on your headphones.
The PULSE Case For Studio Headphones is a universal case that can fit any professional studio monitor headphones. This includes the most popular models from Beyerdynamic, Sony, Sennheiser, Shure and more!
Specifications
The perfect size to fit most professional studio headphones
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 8.62 x 6.69 x 4.09 inches
Exterior dimensions: 9.65 x 7.48 x 4.33
… Read moreDescription
The PULSE Case for Studio headphones is made from durable and lightweight EVA, designed to protect and preserve your headphones during transport. EVA is often used in sports equipment for its shock-absorbing capabilities, so you be confident your studio headphones will be well protected. The case's interior is lined with soft velvet, which will help prevent scratches and any snags on your headphones.
The PULSE Case For Studio Headphones is a universal case that can fit any professional studio monitor headphones. This includes the most popular models from Beyerdynamic, Sony, Sennheiser, Shure and more!
Specifications
The perfect size to fit most professional studio headphones
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 8.62 x 6.69 x 4.09 inches
Exterior dimensions: 9.65 x 7.48 x 4.33
1 in stock $45.41
Click for better price!
or call +44 20 7424 1960
quote 883007
quote 883007
People also bought...
Analog Cases Korg Drumlogue Pulse Hardcase (drum machine hardcase)
Cat: 934599 Rel: 19 Jul 23
Pulse case for the Korg Drumlogue.
Notes: PULSE Case for Korg Drumlogue
Looking for a way to keep your KORG Drumlogue drum machine protected on the go? Look no further than our PULSE case. Specifically designed to fit the Drumlogue and its power supply, this case is the ultimate solution for traveling musicians who want to keep their gear safe.
Crafted with a super soft velvet interior, the PULSE case will protect the wooden side panels and sleek aluminium exterior of your Drumlogue from scratches and other damage. Additionally, a handy mesh pocket is included to store any extra cables or accessories you may need for your performances. Don't risk damaging your gear - keep your Drumlogue safe and sound with the PULSE case.
Description
Inside the case, you'll find a luxurious velvet-like material that will keep your gear safe and snug. On the outside, the case is made from durable EVA that holds its shape, so you can be confident that your equipment is well-protected.
Thanks to the handy moulded rubber handle, transporting this case is a breeze. Plus, its compact size makes it easy to tuck into a larger backpack or suitcase when you're on the move.
Designed to accommodate your Drumlogue and power supply, this case has everything you need to create music on the go. And with a roomy interior pocket, you'll have plenty of space for cables and other essential accessories.
Specifications
Perfect fit for your Drumlogue + cables
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Interior dimensions 14.96 x 7.32 x 3.15 Inches
Exterior dimensions 15.94 x 8.86 x 3.39 Inches
… Read moreLooking for a way to keep your KORG Drumlogue drum machine protected on the go? Look no further than our PULSE case. Specifically designed to fit the Drumlogue and its power supply, this case is the ultimate solution for traveling musicians who want to keep their gear safe.
Crafted with a super soft velvet interior, the PULSE case will protect the wooden side panels and sleek aluminium exterior of your Drumlogue from scratches and other damage. Additionally, a handy mesh pocket is included to store any extra cables or accessories you may need for your performances. Don't risk damaging your gear - keep your Drumlogue safe and sound with the PULSE case.
Description
Inside the case, you'll find a luxurious velvet-like material that will keep your gear safe and snug. On the outside, the case is made from durable EVA that holds its shape, so you can be confident that your equipment is well-protected.
Thanks to the handy moulded rubber handle, transporting this case is a breeze. Plus, its compact size makes it easy to tuck into a larger backpack or suitcase when you're on the move.
Designed to accommodate your Drumlogue and power supply, this case has everything you need to create music on the go. And with a roomy interior pocket, you'll have plenty of space for cables and other essential accessories.
Specifications
Perfect fit for your Drumlogue + cables
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Interior dimensions 14.96 x 7.32 x 3.15 Inches
Exterior dimensions 15.94 x 8.86 x 3.39 Inches
1 in stock $45.41
Click for better price!
or call +44 20 7424 1960
quote 934599
quote 934599
People also bought...
Moog Subsequent 37 Ballistic Cordura Dust Cover (B-STOCK) (synthesiser dust cover)
Cat: 946423 Rel: 07 Mar 23
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***
Protect your Moog Subsequent 37 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.
Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 37 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access
… Read moreProtect your Moog Subsequent 37 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.
Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 37 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access
1 in stock $45.41
People also bought...
CoverUp Pro Ableton Push 1 & Push 2 Desktop Stand (MIDI controller stand)
Cat: 959743 Rel: 14 Nov 23
Stand designed for the Ableton Push 1 or Push 2.
Notes: These supports allow the equipment to be used in an inclined position in such a way that its operation is more comfortable.
The two feet that support the equipment are connected by two 6mm wooden rods. that give it greater stability and prevents the feet from separating.
The temples and the silicone legs are included.
… Read moreThe two feet that support the equipment are connected by two 6mm wooden rods. that give it greater stability and prevents the feet from separating.
The temples and the silicone legs are included.
1 in stock $45.15
Click for better price!
or call +44 20 7424 1960
quote 959743
quote 959743
People also bought...
Analog Cases 1010Music Blackbox & Bluebox Glide Case (sampler/studio mixer case)
Cat: 837664 Rel: 07 Jan 22
Case designed to fit the 1010music Blackbox & Bluebox
Notes: The Blackbox and Bluebox gives you complete recording and mixing capabilities in the palm of your hands. With a portable sampler and mixer this powerful, you're going to want a case to protect it while you're on the go.
The GLIDE case for the Blackbox and Bluebox is custom molded to fit perfectly, exactly without taking away from the amazing portability of the device. The high resolution touch screen on the Blackbox and Bluebox are great for writing full songs or applying effects with a minimal design, so a case that prevents any scratches or cracks will be a lifesaver.
The GLIDE Case is made of durable and stress tested EVA material, which will prevent any damage from drops or spills, and it also features an interior pocket to hold any cables for recording in the wild.
Custom designed for the 1010music Blackbox and Bluebox
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 6.25 x 5.5 x 1.5
… Read moreThe GLIDE case for the Blackbox and Bluebox is custom molded to fit perfectly, exactly without taking away from the amazing portability of the device. The high resolution touch screen on the Blackbox and Bluebox are great for writing full songs or applying effects with a minimal design, so a case that prevents any scratches or cracks will be a lifesaver.
The GLIDE Case is made of durable and stress tested EVA material, which will prevent any damage from drops or spills, and it also features an interior pocket to hold any cables for recording in the wild.
Custom designed for the 1010music Blackbox and Bluebox
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 6.25 x 5.5 x 1.5
1 in stock $45.15
Click for better price!
or call +44 20 7424 1960
quote 837664
quote 837664
People also bought...
Decksaver Arturia Keystep Pro Dust Cover (keyboard controller dust cover)
Cat: 801875 Rel: 18 Dec 20
Polycarbonate shell cover for Arturia Keystep Pro Keyboard Controller
Notes: Custom engineered in the UK for the Arturia Keystep Pro Keyboard Controller, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
… Read more1 in stock $45.15
Click for better price!
or call +44 20 7424 1960
quote 801875
quote 801875
People also bought...
CoverUp Pro Teenage Engineering OP-1 Studio Desktop Stand (synthesiser stand)
Cat: 1007491 Rel: 09 Apr 24
Studio desktop stand designed for the Teenage Engineering OP-1
Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.
The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.
The Live version of this support has a slight incline and is intended for use in a live or standing situation.
Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.
… Read moreThe Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.
The Live version of this support has a slight incline and is intended for use in a live or standing situation.
Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.
1 in stock $44.88
Click for better price!
or call +44 20 7424 1960
quote 1007491
quote 1007491
People also bought...
CoverUp Pro Teenage Engineering OP-1 Live Desktop Stand (synthesiser stand)
Cat: 1007490 Rel: 09 Apr 24
Live desktop stand for the Teenage Engineering OP-1
Notes: CoverUp designed two ergonomic support models for the OP-1: Studio and Live versions.
The Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.
The Live version of this support has a slight incline and is intended for use in a live or standing situation.
Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.
***Please note: The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***
… Read moreThe Studio support has a higher incline and is elevated. This is ideal for seated use, improving screen visibility, and the height allows it to be positioned even behind other desktop equipment.
The Live version of this support has a slight incline and is intended for use in a live or standing situation.
Both supports have rubber feet to prevent slipping and are adorned with two well-known characters that appear on the OP-1.
***Please note: The OP-1 is not included, it is shown in the photos for demonstration purposes only. ***
1 in stock $44.88
Click for better price!
or call +44 20 7424 1960
quote 1007490
quote 1007490
People also bought...
Decksaver Ableton Push 3 Dust Cover (MIDI controller dust cover)
Cat: 965227 Rel: 05 Oct 23
Dust cover designed for Ableton Push 3.
Notes: Introducing the ultimate guardian for your prized Ableton Push 3 - the Decksaver cover! Unlock the full potential of your music production powerhouse while ensuring it remains in pristine condition for years to come. Crafted with meticulous precision and unrivalled expertise, our lid is designed to complement the brilliance of your Ableton Push 3.
The Ableton Push 3 is more than just a controller; it's a gateway to a world of limitless creativity. Its seamless integration with Ableton Live empowers you to bring your musical ideas to life with unparalleled ease. However, with great innovation comes the responsibility to protect your investment from the challenges of the studio and the stage.
This Decksaver cover is built to provide an impenetrable shield against dust, dirt, liquid spills, and accidental knocks. Made from premium-quality polycarbonate (to our own unique recipe), this cover ensures your Ableton Push 3 remains immaculate and free from wear and tear, so you can focus solely on the creative duties of making music.
Designed with precision, the custom-fit mould embraces your Push 3 like a second skin. Whether you're performing live, producing in the studio, or taking your music on the road, our cover ensures your creative flow remains uninterrupted.
As pioneers in protective solutions for musical gear, Decksaver takes immense pride in our stringent quality standards. The design for the Ableton Push 3 Decksaver cover has been rigorously tested to meet the highest level of fit, durability and reliability, ensuring it withstands the demands of your musical journey.
Join the league of top-tier music producers and DJs who trust Decksaver to safeguard their musical instruments. Elevate your music production experience with the confidence that your Ableton Push 3 is cocooned in some of the finest protection available.
Seize the opportunity to explore new sonic dimensions and compose your musical opus without worry. Choose Decksaver, choose excellence, and choose to take your music production to new heights with the Ableton Push 3 Decksaver cover.
Your journey to sonic greatness starts here!
Dimensions
Weight: 0.7 kg
Length: 38.8 cm
Width: 32.5 cm
Height: 4.5 cm
Material: Smoked clear polycarbonate.
… Read moreThe Ableton Push 3 is more than just a controller; it's a gateway to a world of limitless creativity. Its seamless integration with Ableton Live empowers you to bring your musical ideas to life with unparalleled ease. However, with great innovation comes the responsibility to protect your investment from the challenges of the studio and the stage.
This Decksaver cover is built to provide an impenetrable shield against dust, dirt, liquid spills, and accidental knocks. Made from premium-quality polycarbonate (to our own unique recipe), this cover ensures your Ableton Push 3 remains immaculate and free from wear and tear, so you can focus solely on the creative duties of making music.
Designed with precision, the custom-fit mould embraces your Push 3 like a second skin. Whether you're performing live, producing in the studio, or taking your music on the road, our cover ensures your creative flow remains uninterrupted.
As pioneers in protective solutions for musical gear, Decksaver takes immense pride in our stringent quality standards. The design for the Ableton Push 3 Decksaver cover has been rigorously tested to meet the highest level of fit, durability and reliability, ensuring it withstands the demands of your musical journey.
Join the league of top-tier music producers and DJs who trust Decksaver to safeguard their musical instruments. Elevate your music production experience with the confidence that your Ableton Push 3 is cocooned in some of the finest protection available.
Seize the opportunity to explore new sonic dimensions and compose your musical opus without worry. Choose Decksaver, choose excellence, and choose to take your music production to new heights with the Ableton Push 3 Decksaver cover.
Your journey to sonic greatness starts here!
Dimensions
Weight: 0.7 kg
Length: 38.8 cm
Width: 32.5 cm
Height: 4.5 cm
Material: Smoked clear polycarbonate.
7 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 965227
quote 965227
People also bought...
Decksaver Roland TR-909 Dust Cover (drum machine dust cover)
Cat: 589882 Rel: 23 Nov 15
Drum machine dust cover.
Notes: Cult vintage drum machines like Roland's TR-909 are practically museum pieces, especially in pristine condition. For one to come to any harm doesn't bear thinking about! The studio elements of dust, smoke and liquid have taken many a good 909 down over the years - this is where Decksaver steps in.
Precision trimmed for perfect fit whilst accommodating cables, the TR-909 can sit ready for operation.
These beautiful machines are without doubt an investment worth protecting as prices continue to soar.
… Read morePrecision trimmed for perfect fit whilst accommodating cables, the TR-909 can sit ready for operation.
These beautiful machines are without doubt an investment worth protecting as prices continue to soar.
1 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 589882
quote 589882
People also bought...
Decksaver Novation Peak Soft-Fit Dust Cover (synthesiser dust cover)
Cat: 661387 Rel: 30 Aug 17
Protective dust cover specifically designed to fit the Novation Peak
Notes: Our Novation Peak Cover is the first Decksaver to feature Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
… Read more 1 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 661387
quote 661387
People also bought...
Decksaver Korg Minilogue & Minilogue-XD Dust Cover (synthesiser dust cover)
Cat: 618310 Rel: 06 Jul 16
Fitted hard cover specifically designed to fit the Korg Minilogue
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in.
Precision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation.
Slides straight into a flight or soft case for maximum protection during transportation.
Shields delicate controls and internal components from damage at home, on the road and on stage.
*Photographed Korg Minilogue keyboard is not included
… Read morePrecision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation.
Slides straight into a flight or soft case for maximum protection during transportation.
Shields delicate controls and internal components from damage at home, on the road and on stage.
*Photographed Korg Minilogue keyboard is not included
2 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 618310
quote 618310
People also bought...
Decksaver Solid State Logic UF1 Dust Cover (DAW control centre dust cover)
Cat: 965244 Rel: 03 Oct 23
Dust cover designed for Solid State Logic UF1.
Notes: The ever-reliable Decksaver offer up one of their trademark covers for SSL's UF1 DAW control centre. You know the drill by now: solid plastic construction, perfect fit and class-leading protection from dust and accidental damage.
Suppliers notes:
In the realm of music production, the Solid State Logic UF1 holds the power to transform your creative visions into reality.
Yet, the relentless threats of dust, liquid mishaps, and unforeseen impacts loom large, ready to compromise your production hub.
Enter the Solid State Logic UF1 Decksaver cover your steadfast guardian designed to preserve the heart of your musical journey.
Exclusively tailored in the UK, this cover is the embodiment of super-durable polycarbonate technology. Precision moulded to perfectly match the contours of your UF1, it forms an impervious shield against potential disasters. Misplaced beverages and accidental mishaps are no match for the robust protection offered by this cover.
Crafted with meticulous attention to detail, this cover accommodates cables seamlessly while ensuring unobstructed access to your unit's controls. Whether you're composing in the comfort of your studio, producing on the go, or performing on stage, the UF1 Decksaver lid safeguards delicate components and controls, securing your unit's long-lasting performance.
Don't let unexpected incidents hinder your creative flow. With protection in place, you gain the confidence to pursue your musical endeavours without hesitation. When it's time to transport your masterpiece, this cover seamlessly slips into equipment cases, providing unparalleled protection every step of the way.
Elevate your music production experience with unwavering protection. The Solid State Logic UF1 Decksaver cover where innovation meets resilience to ensure your musical journey knows no bounds.
Dimensions
Weight: 0.45 kg
Length: 21 cm
Width: 27.1 cm
Height: 3.4 cm
Material: Smoked clear polycarbonate.
… Read moreSuppliers notes:
In the realm of music production, the Solid State Logic UF1 holds the power to transform your creative visions into reality.
Yet, the relentless threats of dust, liquid mishaps, and unforeseen impacts loom large, ready to compromise your production hub.
Enter the Solid State Logic UF1 Decksaver cover your steadfast guardian designed to preserve the heart of your musical journey.
Exclusively tailored in the UK, this cover is the embodiment of super-durable polycarbonate technology. Precision moulded to perfectly match the contours of your UF1, it forms an impervious shield against potential disasters. Misplaced beverages and accidental mishaps are no match for the robust protection offered by this cover.
Crafted with meticulous attention to detail, this cover accommodates cables seamlessly while ensuring unobstructed access to your unit's controls. Whether you're composing in the comfort of your studio, producing on the go, or performing on stage, the UF1 Decksaver lid safeguards delicate components and controls, securing your unit's long-lasting performance.
Don't let unexpected incidents hinder your creative flow. With protection in place, you gain the confidence to pursue your musical endeavours without hesitation. When it's time to transport your masterpiece, this cover seamlessly slips into equipment cases, providing unparalleled protection every step of the way.
Elevate your music production experience with unwavering protection. The Solid State Logic UF1 Decksaver cover where innovation meets resilience to ensure your musical journey knows no bounds.
Dimensions
Weight: 0.45 kg
Length: 21 cm
Width: 27.1 cm
Height: 3.4 cm
Material: Smoked clear polycarbonate.
1 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 965244
quote 965244
People also bought...
CoverUp Pro Teenage Engineering EP-133 KO II Standalone Studio Stand (audio sampler stand)
Cat: 1000879 Rel: 20 Feb 24
Stand designed to fit the Teenage Engineering EP-133 KO II audio sampler
Notes: This ergonomic stand model is specially designed for the new sampler/sequencer by Teenage Engineering. To achieve a more comfortable use of this beautiful machine, we decided to offer two possible positions: Studio and Live.
The Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.
Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.
… Read moreThe Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.
Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.
1 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 1000879
quote 1000879
People also bought...
Decksaver Solid State Logic UC1 Dust Cover (hardware plug-in controller dust cover)
Cat: 862484 Rel: 11 Mar 22
Smoked polycarbonate cover for Solid State Logic UC1
Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit, the Solid State Logic UC1 can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, on the road and onstage.
… Read more2 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 862484
quote 862484
People also bought...
Decksaver Solid State Logic Big Six Dust Cover (studio mixer dust cover)
Cat: 908659 Rel: 07 Dec 22
Smoked polycarboante cover for Solid State Logic Big Six
Notes: The SSL SiX may be a compact desktop mixing console, but it packs a real punch and is feature laden whether at a live gig, in the studio or on location.
Decksaver's professional mixer range of mixer covers gives audio engineers peace of mind whatever the scenario.
Designed and engineered in the UK specifically for the analogue SiX, our smoked clear Decksaver cover is manufactured from polycarbonate, a tough transparent plastic made to our own specification.
Each design is rigorously tested before it carries our name so you can rest assured.
Shields faders, buttons, knobs and lights from dust, liquid and accidental impact whilst keeping cables and settings intact.
Recommended by the industry, used by professionals.
Dimensions
Weight: 0.65kg
Length: 32.4cm
Width: 27.5cm
Height: 9.04cm
Material: Smoked clear polycarbonate.
… Read moreDecksaver's professional mixer range of mixer covers gives audio engineers peace of mind whatever the scenario.
Designed and engineered in the UK specifically for the analogue SiX, our smoked clear Decksaver cover is manufactured from polycarbonate, a tough transparent plastic made to our own specification.
Each design is rigorously tested before it carries our name so you can rest assured.
Shields faders, buttons, knobs and lights from dust, liquid and accidental impact whilst keeping cables and settings intact.
Recommended by the industry, used by professionals.
Dimensions
Weight: 0.65kg
Length: 32.4cm
Width: 27.5cm
Height: 9.04cm
Material: Smoked clear polycarbonate.
2 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 908659
quote 908659
People also bought...
Decksaver Behringer RD-9 Dust Cover (drum machine dust cover)
Cat: 879569 Rel: 13 Jul 22
Smoked polycarbonate cover for Behringer RD-9
Notes: In 2021, Behringer released one of their most anticipated products - the Behringer RD-9. Inspired by the legendary Roland TR-909 drum machine, the machine boasts 58 buttons and 33 knobs, perfect for crafting your drum sequences to absolute excellence.
Commonly seen in producers' studios when they are crafting beats and instrumentals, it is a highly used piece of equipment within the music industry. To protect those creative ideas evolving from your drum machine, we designed and manufactured a hard shell protective cover!
The Decksaver Behringer RD-9 cover is custom-moulded to perfectly fit whilst accommodating cables, meaning the RD-9 can sit ready for operation while being fully protected. This super durable polycarbonate shell features extreme durability and offers the highest degree of protection.
You will never have to worry about your Behringer RD-9 getting damaged with your Decksaver cover!
Weight: 1kg
Length: 48.2cm
Width: 26.1cm
Height: 4cm
Material: Smoked clear polycarbonate.
… Read moreCommonly seen in producers' studios when they are crafting beats and instrumentals, it is a highly used piece of equipment within the music industry. To protect those creative ideas evolving from your drum machine, we designed and manufactured a hard shell protective cover!
The Decksaver Behringer RD-9 cover is custom-moulded to perfectly fit whilst accommodating cables, meaning the RD-9 can sit ready for operation while being fully protected. This super durable polycarbonate shell features extreme durability and offers the highest degree of protection.
You will never have to worry about your Behringer RD-9 getting damaged with your Decksaver cover!
Weight: 1kg
Length: 48.2cm
Width: 26.1cm
Height: 4cm
Material: Smoked clear polycarbonate.
1 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 879569
quote 879569
People also bought...
Decksaver Behringer K-2/Neutron/Pro-1/Toro/Pro-800 Soft-Fit Dust Cover (synthesiser cover)
Cat: 791938 Rel: 04 Nov 20
Dust cover designed for the Behringer K-2, Neutron, Pro-1, Toro or Pro-800
Notes: The instruments we employ for crafting and bringing music to life hold a special place in our hearts. Throughout the years, the relentless forces of dust, liquid spills, and unfortunate accidents have claimed the functionality of many cherished synthesizers. This is precisely where Decksaver steps in.
Meticulously designed to offer a flawless fit while accommodating cables, this Decksaver cover ensures that your Behringer Pro-800, K-2, Toro, Neutron, or PRO-1 synthesizer is always poised for action. It serves as a robust shield, safeguarding the intricate controls and delicate internal components of your instrument, whether it's in the comfort of your home, the creative confines of your studio, or the electrifying stage.
What sets this Behringer cover apart is the proprietary Soft-fit technology, which delivers an additional layer of protection to those susceptible wooden cheek panels that grace these exceptional synthesizers.
Fits:
K-2
Neutron
PRO-1
Toro
PRO-800
Dimensions:
Weight: 0.75 kg
Length: 43.6 cm
Width: 14.8 cm
Height: 6.6 cm
… Read moreMeticulously designed to offer a flawless fit while accommodating cables, this Decksaver cover ensures that your Behringer Pro-800, K-2, Toro, Neutron, or PRO-1 synthesizer is always poised for action. It serves as a robust shield, safeguarding the intricate controls and delicate internal components of your instrument, whether it's in the comfort of your home, the creative confines of your studio, or the electrifying stage.
What sets this Behringer cover apart is the proprietary Soft-fit technology, which delivers an additional layer of protection to those susceptible wooden cheek panels that grace these exceptional synthesizers.
Fits:
K-2
Neutron
PRO-1
Toro
PRO-800
Dimensions:
Weight: 0.75 kg
Length: 43.6 cm
Width: 14.8 cm
Height: 6.6 cm
1 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 791938
quote 791938
People also bought...
Decksaver Roland SPD-SX Pro Dust Cover (sampling pad dust cover)
Cat: 1009944 Rel: 23 Apr 24
Dust cover designed to fit the Roland SPD-SX Pro
Notes: The Roland SPD-SX Pro, with its forefront sampling capabilities and performance attributes, has not merely cemented itself as an indispensable apparatus for electronic drummers and percussionists but has also emerged as one of the most ardently requested and sought-after Decksaver covers.
In acknowledgement of this considerable demand, Decksaver are delighted to present the Decksaver cover for the Roland SPD-SX Pro, meticulously fashioned from premium polycarbonate. This material is chosen for its outstanding durability and protective qualities, guaranteeing your instrument is defended against dust, spills, and even significant accidental impacts.
Custom-designed to fit the SPD-SX Pro precisely, this cover encases every pad, button, and control, whilst ensuring trouble-free access to all essential connections. The design has been thoroughly devised with the artist's requirements in mind, facilitating swift and straightforward application or removal. This proves particularly advantageous for performers and studio professionals who necessitate efficiency in both the setup and dismantling processes. Whether you're on tour, in the recording studio, or merely storing your SPD-SX Pro at home, this cover acts as a dependable shield, protecting your instrument's sensitive components from the rigours of its environment.
Opting for the highly sought-after Decksaver cover for your Roland SPD-SX Pro transcends a mere practical choice; it symbolises a commitment to maintaining the integrity and longevity of your instrument. It represents an essential investment for any musician dedicated to safeguarding their Roland SPD-SX Pro, ensuring it remains in peak condition for every performance and creative endeavour.
Weight: 0.461 kg
Length: 36.6 cm
Width: 33.9 cm
Height: 4.3 cm
Material: Smoked clear polycarbonate.
WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.
… Read moreIn acknowledgement of this considerable demand, Decksaver are delighted to present the Decksaver cover for the Roland SPD-SX Pro, meticulously fashioned from premium polycarbonate. This material is chosen for its outstanding durability and protective qualities, guaranteeing your instrument is defended against dust, spills, and even significant accidental impacts.
Custom-designed to fit the SPD-SX Pro precisely, this cover encases every pad, button, and control, whilst ensuring trouble-free access to all essential connections. The design has been thoroughly devised with the artist's requirements in mind, facilitating swift and straightforward application or removal. This proves particularly advantageous for performers and studio professionals who necessitate efficiency in both the setup and dismantling processes. Whether you're on tour, in the recording studio, or merely storing your SPD-SX Pro at home, this cover acts as a dependable shield, protecting your instrument's sensitive components from the rigours of its environment.
Opting for the highly sought-after Decksaver cover for your Roland SPD-SX Pro transcends a mere practical choice; it symbolises a commitment to maintaining the integrity and longevity of your instrument. It represents an essential investment for any musician dedicated to safeguarding their Roland SPD-SX Pro, ensuring it remains in peak condition for every performance and creative endeavour.
Weight: 0.461 kg
Length: 36.6 cm
Width: 33.9 cm
Height: 4.3 cm
Material: Smoked clear polycarbonate.
WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.
1 in stock $44.62
Click for better price!
or call +44 20 7424 1960
quote 1009944
quote 1009944
