Back catalogue: Studio Equipment

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: Replacement faceplate for Xaoc Devices' Timiszoara module.

Notes: Optional accessory replacement panel for Xaoc Devices' Koszalin module.

Black anodised alu + heavy duty screen printing.

Notes: Replacement panel for the Xoac Devices Sofia module.

Notes: Replacement panel for the Xoac Devices Poczdam module.

Notes: Tiny but mighty busboard for the tiny but mighty Micronova

This tiny 100x30mm busboard is a perfect companion to Micronova. It provides six additional power headers and is the exact same size as Micronova - perfect for your custom case build.

Includes one 16-pin to 16-pin Eurorack power cable for connecting the busboard to your Micronova or other power supply. If you need them, grab some 16-pin to 10-pin power cables for connecting power to your modules.

100 mm x 30 mm x 13 mm

Notes: Quality wooden sides for Vermona Retroverb Lancet. Looks great on your desktop.

Note: Retroverb Lancet unit is sold separately.

Notes: Perfourmer Rack Ears from Vermona are designed to mount the famed German manufacturer's analog four-voice synthesizer into a 19" rack. For sturdy, reliable performance, these heavy-duty black ears are the way to go.

Black metal rack ears- set of two ears

Notes: A Producer looking for a professional, durable case solution for the Universal Audio Volt 1/ 2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Volt 1/ 2, this case is perfect for the travelling Producer that needs to protect their equipment.

Specifications

Weight: 0,40 kg / 0.88 lbs

Colour: Black
Outer Dimensions (W x H x D) 20.0 x 14.7 x 6.3 cm | 7.9 x 5.8 x 2.5 inch
Inner Dimensions (W x H x D) 19.0 x 13.7 x 5.3 cm | 7.5 x 5.4 x 2.1 inch
Material: Durashock molded EVA foam
Protection: Cover main material 600D polyester with 5 mm EVA durashock molded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective top removable foam

Extras

Removable divider for extra cables or power adapter
Heavy duty handle
Easy grip zipper pulls

Fits

Universal Audio Volt 1 or Volt 2, power adapter, extra cables

Notes: A Digital DJ looking for a professional, durable case solution for your Korg Volca series? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Korg Volca series, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight 0,39 kg / 0.858 lbs
Outer Dimensions (W x H x D): 23.3 x 15.5 x 5.6 cm | 9.2 x 6.1 x 2.2 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extras

Easy grip zipper puller
Convenient carry handle

Fits:

Korg Volca Series:
Volca Beats
Volca Keys
Volca Bass
Volca Sample
Volca FM
Volca Kick
Volca Modular
Volca Drum
Volca Mix

Notes: A Digital DJ/ Producer looking for a professional, durable case solution for your Universal Audio Apollo X4? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Universal Audio Apollo X4, these cases are perfect for the travelling DJ/ Producer that needs to protect their equipment.

Color: Black
Weight: 0,77 kg / 1.694 lbs
Outer Dimensions (W x H x D): 27.8 x 20.2 x 7.6 cm | 10.9 x 7.9 x 2.9 inch
Inner Dimensions (W x H x D): 23.8 x 16.2 x 6.6 cm | 9.4 x 6.4 x 2.6 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior
Extra's:
Heavy-duty handle
Convenient carry handle
Easy grip zipper puller

Fits Universal Audio Apollo X4

Please note: The Audio Apollo X4 is not included in this purchase, it is shown for demonstration purposes only.

Notes: A Digital DJ looking for a professional case solution for your NI Maschine MIkro MK3 interface? Then don't look further as UDG has developed a super light EVA Hardcase Protector designed for life on the road. The UDG Creator NI Maschine Mikro MK2 Hardcase Protector is constructed from durable lightweight compression moulded EVA material with a laminated Nylon exterior. The Case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the NI Maschine Mikro MK3 Interface, the Case is perfect for the travelling artists that needs to protect their equipment.

Specifications

Colour: Black
Weight: 0,65 kg / 1.43 lbs
Outer Dimensions (W x H x D) 36.0 x 21.1 x 5.8 cm | 14.1 x 8.3 x 2.3 inch
Inner Dimensions (W x H x D) 32.5 x 18.2 x 4.8 cm | 12.8 x 7.2 x 1.7 inch
Material: Durashock molded EVA foam
Protection: Soft fleece interior

Extras:

Easy grip zipper puller
Heavy duty handle

Fits:
NI Maschine Mikro MK3 interface.

Notes: A Digital DJ looking for a professional, durable case solution for your Ableton Push controllers? Then look no further, UDG have developed a super light EVA hard case designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Ableton Push controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.

Notes: A Digital DJ looking for a professional, durable case solution for your Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Focusrite Scarlett 4i4/ Clarett 2Pre/ 4Pre/ NI Komplete Audio 6 MK2/ Roland TR-6S, these cases are perfect for the travelling DJ that needs to protect their equipment.

Specifications

Colour: Black
Weight: 0,40 kg / 0.88 lbs
Outer Dimensions (W x H x D): 24.9 x 21.3 x 7.6 cm | 9.8 x 8.3 x 3.0 inch
Inner Dimensions (W x H x D): N/A
Material: Durashock molded EVA foam
Protection: Water repellent laminated nylon exterior
Black soft fleece interior

Extras

Heavy duty handle
Easy grip zipper puller

Fits:

Focusrite Scarlett2 2i4, 4i4, 6i6, 18i8, Clarett 2Pre, 4Pre
NI Komplete Audio 6 MK2
Roland TR-6S
Motu UltraLite AVB, UltraLite MK5
and extra cables

Notes: The UDG Ultimate Height Adjustable Laptop Stand features a height adjustable telescopic laptop shelf that rotates 360- well suited for mobile DJs and electronic musicians. The stand can accommodate laptops up to 19 inch as well as iPads, tablets or a variety of equipment such as controllers, mixers or production gear.

Its 4-prong rotating tray features an anti-slip surface to hold the laptop securely in demanding environments. The stand features a telescopic height adjustment of 23 to 35 cm (9.1 - 13.8 inch) and can be folded flat with no loose parts, offering convenience and portability.lbs

Specifications
Colour: White
Weight: 1,85 kg / 4.07 lbs

Outer Dimensions (W x H x D)
Folded: 28.0 x 27.3 x 3.5 cm | 11.0 x 10.7 x 1.4 inch - Unfolded: 28.0 x 27.3 x 26.5 - 38.0 cm | 11.0 x 10.7 x 10.4 - 14.9 inch
Inner Dimensions (W x H x D): Not Applicable
Material: Metal
Protection: Z-style set-up position to accommodate heavier production gear
Airflow constructed tray prevents equipment from overheating
Rugged, durable metal construction, anti-scratch resistant powder coating

Extras

Telescopic height adjustable (23 - 35 cm | 9.1 - 13.8 inch)
360 degree rotatable laptop tray
2-clicks quick-release mechanism for easy assembly and breakdown
No loose parts
Protective transportation sleeve included

Fits:

Accommodates laptops up to 19 inch, iPad, controller, mixer or production gear. Maximum load: 15.0 kg / 33.06 lbs

Notes: A Digital DJ looking for a professional, durable case solution for your Novation Circuit Tracks/ Rhythm? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Novation Circuit Tracks/ Rhythm, these cases are perfect for the travelling DJ that needs to protect their equipment.

Weight: 0.99 kg / 2.178 lbs
Colour: Black
Outer Dimensions (W x H x D): 29.5 x 25.0 x 7.0 cm | 11.6 x 9.8 x 2.7 inch
Inner Dimensions: (W x H x D) N/A
Material: Durashock molded EVA foam
Protection: Water repellent laminated nylon exterior
Black soft fleece interior

Extras:
Heavy duty handle
Easy grip zipper puller
Fits: Novation Circuit Tracks/ Rhythm

Notes: A music producer/ sound engineer looking for a professional, durable case solution for your Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante, this case is perfect for the travelling A music producer/ sound engineer that needs to protect their equipment.

Specifications

Colour: Black
Weight: 0,40 kg / 0.88 lbs
Outer Dimensions (W x H x D): 23.8 x 14.9 x 8.5 cm | 9.4 x 5.9 x 3.3 inch
Inner Dimensions (W x H x D): 22.8 x 13.9 x 7.5 cm | 8.9 x 5.5 x 2.9 inch
Material: Durashock moulded EVA foam

Protection:

Cover main material 600D polyester with 5 mm EVA durashock moulded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Removable divider for extra cables or power adapter
Heavy duty handle
Easy grip zipper pulls

Fits

Strymon Timeline/ Bigsky/ Mobius/ Nightsky/ Volante

Notes: A music producer/ sound engineer looking for a professional, durable case solution for your Motu M4 or M2? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Motu M4 or M2, this case is perfect for the travelling music producer/ sound engineer that needs to protect their equipment.

Specifications

Colour: Black
Weight: 0,54 kg / 1.188 lbs
Outer Dimensions (W x H x D): 23.3 x 15.5 x 5.6 cm | 9.2 x 6.1 x 2.2 inch
Inner Dimensions (W x H x D): N/A
Material: Durashock moulded EVA foam

Protection:

Covers main material 600D polyester with 5 mm EVA durashock moulded body
Water repellent laminated nylon exterior
Black soft fleece interior
Protective egg-crate foam prevent damage from vibrations & shocks

Extras

Heavy duty handle
Easy grip zipper pulls

Fits

Motu M4 or M2

Notes: The unwanted magnetic charge, which is generated on the recording and playback heads during use is removed by this electronic, demagnetising wand in an electronic manner.

Once used effectively, the sound is clear. Demagnetising takes only 3 to 5 seconds for each head.

Important! As a very strong magnetic field is generated by this accessory, do not use it if you have a pace-maker and do not use in the close vicinity of friends or family with a pace-maker.

*This product has a european-style 2-pin plug*

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: The ZEUS Passive Bus Board is used to distribute power to modules coming from either the first generation of ZEUS Powered Bus Board, uZEUS or any other power supply available from other manufacturers. The Passive Bus Board contain both standard quick fit terminals as well as screw terminal block for connecting to power. The quick fit connect are mounted on the bottom side of the bus board to provide clean wiring, while the screw terminal blocks available simultaneously upfront for the most simple and easy connection to power if needed.

Although called Passive, the ZEUS Passive Bus board can produce up to 220ma of +5V supply by its own built in regulator, giving you the confidence that a 5V supply will be there for you in case one of your new modules requires it.

NOTE: This board does not interface with Zeus Studio Bus

Notes: AC/DC Adapter for uZeus micro power supply

Notes: This brick style AC power adapter is made to power your uZEUS/HEK's. When powering a uZEUS it will double the capacity of the uZEUS +12V rail up to 2000mA. This is especially great for system with digital modules that consume most of their current from the +12V rail. It is rated at 3000mA and is made with heavy gauge wire for better grounding and a specifically set output voltage that helps keep the uZEUS cooler. It is a good option for users maxing out the standard adapter shipped with the Happy Ending Kit.

Notes: The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow..

Before you begin:
Please get a Phillips head screw driver. It is also recommended to have eight eurorack modules available to help align the Z-Rails but this is not mandatory.

The kit contains:
2 x Brackets, left and right
2 x Adhesive foam strips
12 x Phillips pan head machine screws
12 x Nylon washers
1 x Allen Wrench 3mm

Notes: The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Before you begin:
Please get a Phillips head screw driver. It is also recommended to have eight eurorack modules available to help align the Z-Rails but this is not mandatory.

The kit contains:
2 x Brackets, left and right
2 x Adhesive foam strips
12 x Phillips pan head machine screws
12 x Nylon washers
1 x Allen Wrench 3mm

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: A Bluetooth adapter that enables wireless remote control for compatible TASCAM products. When used with the product control app on a smart phone or tablet, remote control and other available functionality is possible.*j

*AK-BT1 does not support sound communication

Main Features:

Supporting Models
Portacapture X8
And remote control app Portacapture Control.
Remote control of Portacapture X8 transport operation, gain adjustment, mixing, and various parameter settings

Specifications:

Bluetooth Adapter AK-BT1
Bluetooth version: v5.0 (Bluetooth Low Energy)
Transmission distance: about 10m*j
Frequency range used: 2.4GHz band

Other

Dimensions: 22.3(W)× 14.9(H)× 5.7(D)mm - including protrusions
Weight: 1.5g
Operating temperature range: 0-40 -C (32 - 104-F)
Included Items: AK-BT1 × 1
Owner's Manual (including warranty) × 1

Notes: The 1-row rack for AE modular is 16 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:41.3 x 11.2 x 4.5 cm (width x depth x height)

Notes: This is a variant of the standard red / black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: Dave Smith Instruments Tempest Replacement Oak End Cheeks

These solid oak replacement end cheeks have been precision machined and hand finished from FSC Certified oak.

They are sent as a pair and will be oiled to bring out the grain, they can still be stained any colour if you prefer them darker or more like the original etc.

These are a great addition to the Tempest, and add a nice look as well as been hard wearing.

Notes: These solid oak end cheeks have been precision-machined and hand finished from FSC certified European Oak.

These cheeks have the option of 2 different working angles and heights to suit your needs.

The stand is assembled by removing the original aluminium end cheeks and replacing them with these, using the supplied 6x screws.

Please note: you will get only the 2x oak end cheeks, so you must purchase your own ASM Hydrasynth.

The item will need assembly as it is sent flat packed, all screws are provided this includes small rubber feet.

Notes: This stand has been hand crafted from Solid Oak to give your Console 1 a much nicer working angle.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen key are provided, to assemble your stand ready for use.

The item will need assembly as it is sent flat packed. All screws and tools are provided; this includes the small rubber feet. However, you must buy your own Console 1.

Notes: Dual Oak Veneer stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form Oak Veneered MDF and fits any 2 of the Roland Aira Compact models.

Once assembled this takes up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Dual Black Valchromat HDF stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form black Valchromat HDF and fits any 2 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Dual MDF stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form MDF and fits any 2 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Triple MDF stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined from MDF and fits any 3 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Solid Osk Replacement Korg MicroKorg End Cheeks

The end cheeks have been precision machined from FSC Certified solid Oak

These are fixed to your Microkorg by removing the original end cheeks and replacing using the existing screws.

The Oak has been oiled and should stay looking beautiful for a long time.

These are a great addition to amazing Korg Microkorg synth and it give a much nicer look.

NOTE: You must buy your own Synth; all you will get is 2 wooden cheeks.

Notes: Solid Oak Replacement End Cheeks for the Modal Electronics Argon 8m and Cobalt 8m Synthersizer.

These FSC Certified Oak end cheeks have been precision machined using a CNC.

They fix to your synth by removing the original end cheeks and replacing them with these using the original screws.

The Oak comes oiled to bring out the grain and should stay looking beautiful for a long time.

These are a great addition to amazing Modal Synths, and give a vintage look.

NOTE: you must buy your own synth; all you will get is 2 wooden cheeks

Notes: This AC Power Adapter comes with a locking DC extension cable. The connector of the DC extension cable screws down to the DC jack, preventing noise interference when the cable is bumped.

There are two voltage options:
12V: used with original 5A Power Supply and newer Five Amp Power.
19V: used with Deluxe Power, Super Power, Case Power Mini and Case Power.
Note: If you are replacing a power brick on a Synthrotek power supply, use the same voltage as was originally sent (unless the brick is 15V, then change to it to 19V).

AC input: 100-240V, 1.6A, 50-60Hz

DC output:
12V at 5A
19V at 4.74A

Center positive 2.1mm pin

Comes with a 3-prong power cable, which will work in the US and some other countries. If you are in Europe, etc. you can get a separate volex connector that will work in your country. We don't carry international connecting cables, but you can find them easily on the web.

Notes: Add a bit of fun to your EuroRack synth with these new glow in the dark patch cables. They work best when charged under a light source briefly.

Features:

Quality nickel plated 3.5mm Mono TS male connection
Reliable and robust, designed to be easy to patch
Available in 15cm, 30 cm or 50cm
Cables built to high specification multi strand copper 26 awg *1C with foil shielding
Planet friendly and recyclable
Pack of 5 cables

These glow in the dark cables have not been anywhere near nuclear reactors or other sources of radiation!

Notes: Synth Cables v2 LED Patch Cables are packed with the latest technology.

Now 50% slimmer with all-new adonised aluminium barrel and ultra flexible slim cable. Bicolour LED Pulses Green and Red for Positive and Negative voltages.

Visualise your patches like never before.

Ideal for Gates, Triggers and CV outputs.

Visualise, identify and diagnose signal flow.

Built for EuroRack modular, semi modular, midi controllers and other CV sources.

Specifications

v2 super slim adonised aluminium barrel
3.5mm mono jack connector
Bicolour Green Red LED
Ultra flexible white PVC cable
Available in 30cm and 60cm lengths

Please Note- You may see a very small drop in voltage as LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.