Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

new vinly this week
ホーム  Back Catalogue  Studio Equipment  Studio Equipment
Subscribe here to receive our weekly roundup of the latest studio equipment products

Filter

Format: All Vinyl CD DJ Equipment Studio Equipment
Options
150/434(ページ1/9)の商品
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z すべて
1  2  3  4  5  6  7  8  9  »
0HP Button Utility Module
0HP Button Utility Module (utility module)
Cat: 956529 Rel: 17 Jul 23
 
Utility module.
Notes: The 0HP Butt0n from Mystic Circuits is a deceptively useful yet simple entry into the 0HP modular line. Two buttons that work in tandem to create a variety of switching behaviours. Use either the latching or momentary button to activate or deactivate two connected signals. Some clever routing also allows the latching button to change the momentary button from normally open to normally closed. Similar signal paths to Mystic Circuits' 0ttenuator module allow both channels to be used separately, two signals to be mixed together or one signal to be sent to two destinations.
Read more
 1 in stock $29.71
0HP Envelope Utility Module
Cat: 956541 Rel: 17 Jul 23
 
Utility module
Notes: Dont let the name fool you, this module is quite a bit more than just an envelope. ePatch in a gate and your output will behave as a normal sustain- release envelope, staying high while the gate is high and slowly decaying once it goes low. Patch in audio and you have an envelope follower, extracting amplitude data from whatever signal is coming in. Patch in any positive control voltage and you have a slew, adding glide whenever the incoming voltage falls. All three modes boast voltage control over the release/ response time and can use the on board input mult to either daisy chain multiple envelopes or to extract amplitude data from an audio input and then send the audio somewhere else. Possibly Mystic Circuits' most useful 0HP module yet.

Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence we aim to make modular synthesis accessible and fun for the veteran and new user alike.
Read more
 1 in stock $38.91
0HP Filter Utility Module
Cat: 956543 Rel: 17 Jul 23
 
Utility module
Notes: An audio filter in a tiny package! A blend between Mystic Circuits' "AND - gate" and their "Vactrol Low Pass Gate" circuits, the cutoff frequency can be modulated at audio rate. It also features a voltage controlled clipping circuit which allows for further wave shaping. The response of this circuit is much faster than that of the Vactrol Low Pass Gate, so it will react to very plucky envelopes and even triggers.

Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of their fabulous rare colors. With a robust line of modules planned in the future, full DIY kits and an open hardware license we aim to make modular synthesis accessible and fun for the veteran and new user alike.
Read more
 1 in stock $38.66
1010 Music 3.5mm TRS Patch Cables (pack of 5, 30cm)
Cat: 877200 Rel: 25 May 22
 
A five pack of black TRS cables with male 3.5mm minijacks on either end of a 30cm/11.75 cable with 1010music printed on the jacks.
Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.

Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 60 cm / 23.5"
Pack size: 5 Pack
Read more
 2 in stock $28.39
1010 Music Bitbox MK1 & MK2 Replacement Faceplate (black)
Cat: 882303 Rel: 29 Jun 22
 
Black Faceplate for Bitbox MK1 or MK2
Notes: You can now update your Bitbox mk1 or mk2 with a black faceplate. Now you can have an all black rack and have digital sampling capabilities. This is just the faceplate.

Give your module a facelift

These replacement faceplates are designed for use with the module in the traditional orientation with the screen on top. These are the same faceplates used when manufacturing our modules, but now in black. They are anodized aluminium with a bead blasted finish.

Swapping out a faceplate is easy to do, and requires a small wrench or pliers. Here are the steps to replace a faceplate:

Remove the module from the rack.
Use a small wrench or pliers to remove the small round nuts around each of the mini jacks. Note that these nuts have a notch on the top side of them. This notch fits into a specialized tool that can be used to remove these nuts more easily.
Gently tug on the four knobs to pull them off.
Use a small wrench or pliers to remove the hex nuts from the knob stems.
Remove the washers from the knob stems.
Gently pull up on the faceplate and it will slide off easily.
Place the new faceplate on the module.
Replace the washers on the knob stems.
Use a small wrench or pliers to replace the hex nuts on the knob stems.
Use a small wrench or pliers to replace the small round nuts around each of the mini jacks. Note that the notch should be on the top side of the nuts, the side away from the faceplate.
Look at the underside of the knobs and the post that they rest on. You will see that the knobs are keyed. Line up the flat edge of the hole in the knob with the flat edge of the post, and then push the knob onto the post. If you have the knob aligned properly, it should go on with moderate pressure. If it seems to require more force, please check the alignment.

Weight: 0.19 lbs
Dimensions: 5.5 × 5 × 0.25 in
Touchscreen product: bitbox, fxbox, synthbox, toolbox
Read more
 2 in stock $31.54
AE Modular 2-Row 12x2 Narrow Case (B-STOCK)
Cat: 936906 Rel: 19 Oct 20
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


This 2-row rack for AE modular is 12 units wide with 2 rows; the MASTER module consumes 2 units so you have 22U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 31,1 x 21.7 x 4.5 cm (width x depth x height)

Read more
 1 in stock $33.18
Akai Professional LPD8 MKII 8-Pad USB MIDI Controller
Cat: 903021 Rel: 30 Sep 22
 
8 Velocity and Pressure sensitive pads with co-molded rubber tops from the MPC series.
Notes: Still one of the best value pad controllers on the market, Akai's trusty LPD8 offers eight MPC-style pads and eight rotary controls. Simple, effective and compatible with most hardware and software.

Supplier's Notes:
Premium pad performance

Great things come in small packages and the the LPD8 delivers in a big way. The sleek MIDI pad controller features 8 velocity-sensitive RGB pads from the flagship MPC X and is up to any pad performance-based duties for the modern beat-making music producer. Produce beats, trigger one-shot samples and loops, or connect to any general MIDI-based DAW for easy hands-on controlling and creation.

Legendary pad performance

LPD8 features the same pads from the top-of-the-line MPC X standalone hardware. The sturdy yet super responsive pads are the standard for any music maker looking for dynamic performance without compromising creativity.

Assignable knob controls

LPD8 features 8 assignable rotary knobs for precise control of parameters and values in your DAW. Adjust reverb or delay wetness, dial in parametric eq, trim loops and samples, and so much more with the accuracy you need for your music creation workflow.

Sleek compact design

LPD8 fits in wherever you need it. Sit it on your desk, neatly against your laptop computer for a streamlined process, or pack it into your producer bag with your headphones and accessories ensuring you're always ready to create anywhere.

MPC plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Controls:

(8) velocity-sensitive, RGB-lit pads
(8) 270- knobs
(4) UI buttons

Programs: 4 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 12.1" x 3.2" x 1.3" / 306 x 81 x 34 mm
Weight: 0.86 lbs./0.39 kg
Read more
 6 in stock $48.22
Click for better price!
or call +44 20 7424 1960
quote 903021
Akai Professional LPK25 MKII 25-Key USB MIDI Keyboard Controller
Cat: 903031 Rel: 30 Sep 22
 
LPK25 Laptop Keyboard Controller
Notes: Updated version of Akai's much-loved mini keyboard controller. Second-generation model gets a visual makeover plus updated keybed for improved playability. Superb value.

Supplier notes:
Mini keys, major performance

The LPK25 is the perfect companion for piano and keyboard-playing musicians everywhere. When inspiration calls, this sleek 2-octave MIDI controller makes for easy composing and creating in even the tightest spaces while still delivering an incredibly responsive experience.

A real controller for a real creation

LPK25 features the revolutionary Gen 2 Dynamic keybed which premiered on the legendary MPK mini mk3 MIDI controller. The keys offer an exquisite playing experience with careful attention to velocity response. Whether you're playing a gentle upright piano, a super synthesizer plugin, or triggering notation into your favourite composition software, LPK25 becomes a natural extension of your creativity, ensuring you won't miss a beat.

Built-in clock and arpeggiator

The onboard arpeggiator and clock make for powerful control of any destination, whether software instrument, hardware device, or USB enabled modular gear, all via a single USB cable.

Compact production partner

When not in use, LPK25 stores away quickly and neatly until your next creative session. Pack it in your everyday carry bag and keep it handy for use with your laptop, smart phone, or tablet.

MPC Plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Keyboard
25 keys, velocity-sensitive
10-octave range (127 MIDI notes)

Arpeggiator
Range: 1-4 octaves
Modes: Up, Down, Exclusive, Inclusive, Order, Random, or Latching
Time Divisions: 1/4-note, 1/4-note triplet, 1/8-note, 1/8-note triplet, 1/16-note, 1/16-note triplet, 1/32-note, or 1/32-note triplet
Tempo: 30-240 BPM via Tap Tempo button (internal sync). Based on software tempo (external sync)
Swing: 50%, 55%, 59%, 61%, or 64%
Programs: 8 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 13.7" x 4.0" x 1.5" / 348 x 102 x 38mm
Weight: 0.99 lbs. / 0.45 kg
Read more
 5 in stock $40.44
Click for better price!
or call +44 20 7424 1960
quote 903031
Akai Professional LPK25 MKII 25-Key USB MIDI Keyboard Controller (B-STOCK)
Cat: 961351 Rel: 01 Jan 90
 
***B-STOCK: Box opened, product unused***
Notes: Updated version of Akai's much-loved mini keyboard controller. Second-generation model gets a visual makeover plus updated keybed for improved playability. Superb value.

Supplier notes:
Mini keys, major performance

The LPK25 is the perfect companion for piano and keyboard-playing musicians everywhere. When inspiration calls, this sleek 2-octave MIDI controller makes for easy composing and creating in even the tightest spaces while still delivering an incredibly responsive experience.

A real controller for a real creation

LPK25 features the revolutionary Gen 2 Dynamic keybed which premiered on the legendary MPK mini mk3 MIDI controller. The keys offer an exquisite playing experience with careful attention to velocity response. Whether you're playing a gentle upright piano, a super synthesizer plugin, or triggering notation into your favourite composition software, LPK25 becomes a natural extension of your creativity, ensuring you won't miss a beat.

Built-in clock and arpeggiator

The onboard arpeggiator and clock make for powerful control of any destination, whether software instrument, hardware device, or USB enabled modular gear, all via a single USB cable.

Compact production partner

When not in use, LPK25 stores away quickly and neatly until your next creative session. Pack it in your everyday carry bag and keep it handy for use with your laptop, smart phone, or tablet.

MPC Plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Keyboard
25 keys, velocity-sensitive
10-octave range (127 MIDI notes)

Arpeggiator
Range: 1-4 octaves
Modes: Up, Down, Exclusive, Inclusive, Order, Random, or Latching
Time Divisions: 1/4-note, 1/4-note triplet, 1/8-note, 1/8-note triplet, 1/16-note, 1/16-note triplet, 1/32-note, or 1/32-note triplet
Tempo: 30-240 BPM via Tap Tempo button (internal sync). Based on software tempo (external sync)
Swing: 50%, 55%, 59%, 61%, or 64%
Programs: 8 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 13.7" x 4.0" x 1.5" / 348 x 102 x 38mm
Weight: 0.99 lbs. / 0.45 kg
Read more
 1 in stock $43.12
ALM M3 6mm Modular Synthesiser Case Mount Screws (pack of 100)
Cat: 911511 Rel: 16 Nov 22
 
Custom ALM finger friendly case mount screws sized M3 with a 6mm depth.
Notes: Custom ALM finger friendly case mount screws sized M3 with a 6mm depth.

No screwdriver necessary - makes your daily case rearranging ritual even easier!

These low profile and stylish screws stay out of hands way and will fit underneath a Decksaver lid with ALM cases.

Available in boxes of 100 screws.
Read more
 8 in stock $31.29
Analog Cases 1010Music Blackbox & Bluebox Glide Case
Cat: 837664 Rel: 07 Jan 22
 
Case designed to fit the 1010music Blackbox & Bluebox
Notes: The Blackbox and Bluebox gives you complete recording and mixing capabilities in the palm of your hands. With a portable sampler and mixer this powerful, you're going to want a case to protect it while you're on the go.

The GLIDE case for the Blackbox and Bluebox is custom molded to fit perfectly, exactly without taking away from the amazing portability of the device. The high resolution touch screen on the Blackbox and Bluebox are great for writing full songs or applying effects with a minimal design, so a case that prevents any scratches or cracks will be a lifesaver.

The GLIDE Case is made of durable and stress tested EVA material, which will prevent any damage from drops or spills, and it also features an interior pocket to hold any cables for recording in the wild.

Custom designed for the 1010music Blackbox and Bluebox

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 6.25 x 5.5 x 1.5
Read more
 1 in stock $45.75
Click for better price!
or call +44 20 7424 1960
quote 837664
Analog Cases 13.3" XTS Flex Tray For Large XTS Desktop Stand System
Cat: 981290 Rel: 15 Jan 24
 
13.3" Flex tray for large XTS stand
Notes: Extend your Large XTS Stand's functionality with a Flex Tray: the perfect solution for using multiple pieces of gear on a single desktop stand!

The XTS Flex Tray is available in two lengths: 13.3" or 17.7". It attaches easily and securely to your Large XTS Stand, with no tools required.

The 13.3" Flex Tray can hold 2-3 small pedals or synths. The 17.7" Flex Tray can fit an Elektron Digitakt and Digitone, two SP-404s, 2 large pedals like a Strymon BigSky or Timeline, or up to 6 compact pedals like Chase Bliss.

The XTS Flex Tray is compatible with the Large XTS Stand. For other XTS Stand size options, check out our complete XTS Desktop Stand System.

Flex Tray for Large XTS Stand
Xtend your XTS Stand's functionality
Use multiple pieces of gear on a single desktop stand
2 sizes available for ultimate versatility
Crafted from 100% solid sheet metal

Specs

13.3" Flex Tray

Length: 13.3"
Width: 8.3"
Weight: 2.9 lbs
Fits 2-3 small pedals or synths
Read more
Tags: Stands
 1 in stock $25.77
Analog Cases Akai Professional MPC Studio 2 Pulse Case
Cat: 871600 Rel: 14 Apr 22
 
Pulse case designed for the Akai Professional MPC Studio 2
Notes: Taking your creativity on the go is easy with our PULSE Case for the Akai MPC Studio 2! With a rigid exterior made from molded EVA material and a plush velvet interior, you can feel confident knowing your MPC Studio 2's LCD screen and touch-sensitive pads are totally protected. This ultra-compact and totally flat case will pack easily into your backpack, so you can use the entire world as your studio!

Description

These PULSE cases are made from a durable EVA material that is custom molded to your Akai MPC Studio 2. This secure fit will prevent your MPC from shifting and moving if you throw your case into your backpack or luggage when you're on the move.

The nylon strap makes carrying this case a breeze and the secure fit will prevent your MPC from shifting and moving as you throw your case into your backpack or luggage.

The interior of the PULSE case features a mesh pocket for storing extra cables or notes. The case is also lined with high-quality, soft velvet. This ensures that the sleek exterior, LCD screen, and pads are protected as you move.

Specifications

Custom molded to the Akai MPC Studio 2
Made from a lightweight and durable EVA material
Internal storage pocket for extra cables
Lightweight and easy to carry
Exterior: 14.76 x 8.46 x 2.56
Read more
 1 in stock $41.29
Click for better price!
or call +44 20 7424 1960
quote 871600
Analog Cases Beyerdynamic/Sennheiser/Shure/Sony/Audio-Technica Studio Headphones Pulse Case
Cat: 883007 Rel: 09 Aug 22
 
Pulse case designed for studio headphones!
Notes: Keep your headphones safe for many sessions and gigs to come with the PULSE Case For Studio Headphones! This durable molded case can fit any model of professional studio monitor headphones from Beyerdynamic, Sennheiser, Shure, Sony, Audio-Technica, and other leading brands. Like all PULSE cases, this case is compact and ultra-lightweight, so it's easy to travel with.

Description

The PULSE Case for Studio headphones is made from durable and lightweight EVA, designed to protect and preserve your headphones during transport. EVA is often used in sports equipment for its shock-absorbing capabilities, so you be confident your studio headphones will be well protected. The case's interior is lined with soft velvet, which will help prevent scratches and any snags on your headphones.

The PULSE Case For Studio Headphones is a universal case that can fit any professional studio monitor headphones. This includes the most popular models from Beyerdynamic, Sony, Sennheiser, Shure and more!

Specifications

The perfect size to fit most professional studio headphones
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 8.62 x 6.69 x 4.09 inches
Exterior dimensions: 9.65 x 7.48 x 4.33
Read more
 1 in stock $46.02
Click for better price!
or call +44 20 7424 1960
quote 883007
Analog Cases Focusrite Scarlett 2i2 GLIDE Case
Cat: 883010 Rel: 09 Aug 22
 
GLIDE case for the Focusrite Scarlett 2i2
Notes: A portable interface needs a secure and mobile case! The compact GLIDE case features a soft, velvet-lined interior to keep your 2i2 looking new, and you'll have plenty of room to store cables in the mesh compartment built into the lid. The compact GLIDE case is designed to keep the footprint of your 2i2 small and lightweight while protecting your gear.

Description

The GLIDE case for the Focusrite 2i2 is custom molded to fit your interface perfectly without taking away from its portability. The case is made from the durable EVA material designed to protect your interface when you throw it in your backpack or carry it to and from your session.

The interior of the GLIDE case features a mesh pocket for storing any extra cables you might have. The soft, velvet-lined interior will protect the sleek exterior of the 2i2 while keeping the knobs and inputs safe from knocks and debris. Become as portable as you need to be while knowing your Focusrite 2i2 will be looking good as new!

Specifications

Custom molded to the exact dimensions of the Focusrite 2i2
Separate storage pocket for cables
Durable EVA exterior
High-quality, velvet-lined interior
Interior: (7.68 x 4.09 x 2.2) inches
Exterior: (8.19 x 4.92 x 2.68) inches
Read more
 1 in stock $37.60
Analog Cases Korg Drumlogue Pulse Hardcase
Cat: 934599 Rel: 19 Jul 23
 
Pulse case for the Korg Drumlogue.
Notes: PULSE Case for Korg Drumlogue

Looking for a way to keep your KORG Drumlogue drum machine protected on the go? Look no further than our PULSE case. Specifically designed to fit the Drumlogue and its power supply, this case is the ultimate solution for traveling musicians who want to keep their gear safe.

Crafted with a super soft velvet interior, the PULSE case will protect the wooden side panels and sleek aluminium exterior of your Drumlogue from scratches and other damage. Additionally, a handy mesh pocket is included to store any extra cables or accessories you may need for your performances. Don't risk damaging your gear - keep your Drumlogue safe and sound with the PULSE case.

Description

Inside the case, you'll find a luxurious velvet-like material that will keep your gear safe and snug. On the outside, the case is made from durable EVA that holds its shape, so you can be confident that your equipment is well-protected.

Thanks to the handy moulded rubber handle, transporting this case is a breeze. Plus, its compact size makes it easy to tuck into a larger backpack or suitcase when you're on the move.

Designed to accommodate your Drumlogue and power supply, this case has everything you need to create music on the go. And with a roomy interior pocket, you'll have plenty of space for cables and other essential accessories.

Specifications

Perfect fit for your Drumlogue + cables
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Interior dimensions 14.96 x 7.32 x 3.15 Inches
Exterior dimensions 15.94 x 8.86 x 3.39 Inches
Read more
 1 in stock $46.02
Click for better price!
or call +44 20 7424 1960
quote 934599
Analog Cases Korg SQ-64 Pulse Hardcase (black)
Cat: 864414 Rel: 22 Feb 22
 
PULSE case custom-designed to fit form to the exact dimensions of the Korg SQ-64
Notes: The new PULSE Case For The Korg SQ-64 is the ideal solution for protecting your SQ-64. If you're transporting your SQ-64 to a live performance or just performing with friends, you'll feel confident stepping into any environment with the PULSE Case for the SQ-64.

Description

The PULSE Case has been custom-designed to fit form to the exact dimensions of the Korg SQ-64. Made out of a molded EVA material, the PULSE case will protect the knobs, screen, and pads during transport.

The PULSE cases interior is lined with black velvet material to prevent any scratches on the screen of your SQ-64. The PULSE Case also includes a mesh pocket for storing any additional USB or patch cables you might have. If you're throwing your sequencer in your backpack or stepping out into the live environment, the PULSE case is the logical sequence in protecting your SQ-64.

Specifications

Perfect fit for your Korg SQ-64
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Exterior: (15.04 x 5.71 x 1.97) Inches
Read more
 1 in stock $41.29
Click for better price!
or call +44 20 7424 1960
quote 864414
Analog Cases Presonus Studio 24C Glide Hardcase
Cat: 883013 Rel: 09 Dec 22
 
GLIDE Case for the PreSonus Studio 24c
Notes: The GLIDE Case for the PreSonus Studio 24c is the ideal solution for keeping your audio interface safe and protected. The custom-molded design and velvet-lined interior provide exceptional protection when you're on the go. When you need to pack up and move at a moment's notice, you can be confident that the GLIDE case will keep the knobs and inputs of your Studio 24c safe from any bumps or falls!

Description

The GLIDE case is molded to the exact dimensions of the PreSonus Studio 24c. This means your interface will be secure inside the case without shifting or moving during transport. The interior is lined with soft velvet to keep your Studio 24c safe from any scuffs or scratches. We have also included a mesh pocket for extra cables.

The exterior of the GLIDE case is made of a durable and stress-tested EVA material. This will protect the inputs and knobs of your Studio 24c from any unintended drops or spills during transport.

Specifications

Custom designed for the PreSonus Studio 24c
Durable EVA exterior
Soft, velvet-lined interior
Mesh compartment for holding cables
Interior dimensions: (7.44 x 6.5 x 2.05) Inches
Exterior dimensions: (8.19 x 7.28 x 2.44) Inches
Read more
 1 in stock $38.13
Analog Cases Roland MC-101/TR-6S Glide Case
Analog Cases Roland MC-101/TR-6S Glide Case (groovebox/drum machine case)
Cat: 838236 Rel: 15 Sep 21
 
Glide case designed for the Roland MC-101 or TR-6S
Notes: With the Roland MC-101, you can produce music anywhere, anytime. Keep your unit protected while you're on the move with this durable and lightweight GLIDE case.

Description:

Custom-molded to fit the MC-101 or TR-6S, this case will provide the protection you need. The exterior is rigid and waterproof, while the interior is lined with soft velvet. Made from high-quality, premium materials, you'll never have to worry about your MC-101 while it's in our GLIDE case.

Specifications:

Custom designed for the Roland MC-101 or TR-6S

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 9.75 x 5 x 2 inches

Exterior dimensions: 10.5 x 6 x 2.75 inches
Read more
MRP:$47.33 SAVE 12%
 1 in stock $41.55
Click for better price!
or call +44 20 7424 1960
quote 838236
Analogue Solutions 90cm CV LED Patch Cables (pack of 5)
Cat: 839533 Rel: 28 Jul 21
 
Pack of 5 90cm CV LED patch cables
Notes: 5 x LED CV cables - mono mini jack- ideal for Eurorack.

These will light red / green as the signal swings from a positive to negative voltage.

The colours are swapped for each end:
Jack 1: red / green (+/-), Jack 2: green / red (+/-).

Expect a very small drop in signal power! Light requires energy! However, in most applications, you will not notice any drop.

The cables are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty, they have practical advantages too:
Help seeing what's going on in the dark!
Help diagnose signal flow.
Read more
 1 in stock $42.07
Click for better price!
or call +44 20 7424 1960
quote 839533
Analogue Solutions LED CV Jack Pins (pack of 5)
Analogue Solutions LED CV Jack Pins (pack of 5) (LED jack pins - mono mini jack)
Cat: 860633 Rel: 13 Jan 22
 
5 x LED jack pins - mono mini jack. Ideal for Eurorack.
Notes: Branded Analogue Solutions LED Jack Pins.

These will light red / green as the signal swings from a positive to negative voltage.

Use the for diagnostics - or, just because they look cool (especially in the dark!)

The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty - they have practical advantages too!

Help seeing what's going on in the dark!

Help diagnose signal flow.
Read more
 1 in stock $29.45
Arturia MicroFreak Gooseneck Vocoder Microphone
Cat: 789250 Rel: 26 Oct 20
 
Microphone for Arturia MicroFreak Vocoder
Notes: The perfect companion to MicroFreak's Vocoder engine. This specially designed microphone attachment lets you add your vocals to MicroFreak's unique mix of digital and analog.

Transform your toplines, harmonies, and spoken word into inspiring modulated textures.

With its gooseneck design, this electret microphone is built with ergonomics and ease of use in mind. Adjust its height and angle to suit your setup, and connect it directly to MicroFreak's head-phone connector. Thanks to an additional socket on the microphone's base, you can still connect your headphones for monitoring.

In terms of sound, the microphone is designed to work perfectly with the MicroFreak Vocoder engine's 16-band frequency range, ensuring accurate detection of the complex harmonics of the human voice. MicroFreak will detect when the mic is connected and automatically set the gain, but this can be easily adjusted in the utility menu.

Jump from subtle synthesized harmonies to robot vocals in no time with the MicroFreak Vocoder Microphone!
Read more
 2 in stock $28.93
Befaco M2.5 Knurlies Synth Module Screws With Washers (pack of 50)
Cat: 699919 Rel: 06 Nov 18
 
Pack of 50 Knurlies Eurorack M2.5 rack screws
Notes: 50 of Befaco's unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.

Each Knurlie comes with a fitted plastic washer to prevent rack rash.
Read more
 8 in stock $20.51
Befaco M3 Knurlies Synth Module Screws (pack of 50)
Cat: 668668 Rel: 09 Nov 17
 
Pack of 50 screws specially designed for Eurorack
Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!

Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.

These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
Read more
 More than 10 in stock $22.35
Bocuma Nudols 3.5mm Mono Minijack Patch Cables (black/2x30cm/2x60cm/1x90cm)
Cat: 929638 Rel: 19 May 23
 
Black patch cables, 5x pack, assorted lengths.
Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.
Read more
 1 in stock $31.02
Bocuma Nudols 3.5mm Mono Minijack Patch Cables (grey/2x30cm/2x60cm/1x90cm)
Cat: 929630 Rel: 19 May 23
 
Grey patch cables, 5x pack, assorted lengths.
Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.
Read more
 1 in stock $31.02
Chroma MIDI Fighter Twister/Spectra/3D/Classic Dust Cover
Cat: 938326 Rel: 26 Apr 23
 
Protective dust cover lids for MIDI Fighters.
Notes: Protective dustcover lids for Midi Fighters.

Custom-designed dust cover made to rest on top of your gear and protect it from liquid spills, impacts, and dust.

The Chroma Cover can be inverted to act as a stand, bringing it up closer to mixer height.

4 rubber feet keep the cover in place in "stand mode" even during more intense button-mashing performances.

Designed by the DJ Techtools team to fit Midi Fighter Twisters, Spectras, 3Ds, and Classics.

Chroma have made their very own covers for the Midi Fighter lineup - made to protect your expensive controllers from disaster both on-stage and in the home or studio. We've heard from hundreds of Midi Fighter owners who want a better way to keep their units safe. Think of a Chroma Cover as a way to invest in the future perfection of your gear - repelling any issues from liquid or impact.

The Chroma Cover works perfectly in tandem with our Chroma Case - a hardshell travel case for the same Midi Fighter models.
Read more
 2 in stock $41.55
Click for better price!
or call +44 20 7424 1960
quote 938326
Chroma MIDI Fighter Twister/Spectra/3D/Classic Hardcase
Cat: 938321 Rel: 26 Apr 23
 
Protective hardcase for MIDI Fighters.
Notes: Protective hard case for Midi Fighters

Molded case with rugged ripstop shell designed to prevent impact and scratching damage to controllers

Designed by DJ Techtools team to fit Midi Fighter Twisters, Spectras, 3Ds, and Classics.

Includes additional organization pockets and loops for cables, adapters, and more

The Chroma Case for the Midi Fighter Spectra, Midi Fighter Twister, 3D, and Classic is designed to be a high-quality protective enclosure for your controller. The lightweight design is made to be a snug fit for the Midi Fighter while also providing a few extra spots for accessories or cables.

The Chroma Case works perfectly in tandem with our Chroma Cover - an impact resistant lid that doubles as a stand for the same Mdii Fighter units.
Read more
 1 in stock $37.34
Citronic CU-50 USB Recording Condenser Microphone & Stand
Cat: 877411 Rel: 10 May 22
 
Compact studio condenser microphone for podcasting and vocal recording.
Notes: USB Recording Microphone and Stand

Compact studio condenser microphone for podcasting and vocal recording. Fitted with a back-electret capsule, driven by an onboard preamp. Echo effect and mute function are switchable via 2 illuminated buttons at the front. Connection to a PC or Mac computer is via the supplied USB lead and operates as a plug & play USB audio device.The complete assembly is housed in a black anodised die-cast body with a large steel grille for the capsule. Supplied with a collar clamp and mini tripod for convenient, table-top operation.

Specifications

Capsule: 14mmO back electret
Polar pattern: Cardioid
Connection: USB type B (power & digital audio)
Lead length: 1.5m
Frequency response: 20Hz - 20kHz
Sampling format: 16-bit
Sample rate: 44.1kHz or 48kHz
Controls: Echo on/off, Mute on/off
S/N ratio: 78dB
Sensitivity: -40dB (i2dB)
Dimensions: 147 x 50mmO (microphone only)
Weight: 272g (microphone only)

In the box

The box for this item contains :

CU-50 compact USB studio microphone
Threaded collar clamp
Mini tripod stand
USB A to B lead
Read more
MRP:$31.56 SAVE 22%
 1 in stock $24.71
Citronic ECM20 Cardioid Condenser Microphones Stereo (pair)
Cat: 922311 Rel: 19 Jan 23
 
A pair of miniature cardioid condenser microphones, recording in stereo, overheads for drums and drop mics for chorus sections..
Notes: A pair of miniature cardioid condenser microphones with compact dimensions and ultra-high sensitivity. Applications include recording in stereo, overheads for drums and drop mics for chorus sections.

Power supply: 9 - 52V phantom power
Frequency response: 50Hz - 17kHz
Polar pattern: Cardioid
Sensitivity: -45dB (0dB=1V/Pa @ 1kHz)
Output impedance: 200 Ohms +/-30% (@ 1 kHz)
Max. input: SPL136dB (@ 1kHz ?1% T.H.D)
Dimensions (each): 83 x 20mmO
Weight (each): 28g

In the box

The box for this item contains :

2 x miniature condenser microphones
Read more
MRP:$62.06 SAVE 32%
 2 in stock $42.03
Citronic SMK-7 Studio Condenser Microphone Kit (shock mount/pop filter/pop shield/XLR lead/mount with clamp)
Cat: 877410 Rel: 10 May 22
 
Studio microphone kit comprising a condenser microphone with shock mount, pop filter, pop shield, XLR lead and adjustable arm mount with clamp.
Notes: Studio Microphone Kit

Studio microphone kit comprising a condenser microphone with shock mount, pop filter, pop shield, XLR lead and adjustable arm mount with clamp. Designed for use with mixing consoles or audio interfaces that have phantom power at the input. Delivers crisp and clear vocals and instrument recordings for project studios, online broadcasts and DAW based applications.

Phantom power: +48V required
Power source: Phantom power 5-48V required
Capsule: 26mmO back electret condenser
Polar pattern: Cardioid
Sensitivity: -38dB i 2dB @ 1kHz (0dB = 1V/Pa)
Impedance: 150 Ohms
S/N ratio: 78dB
SPL: max.132dB @ 1kHz (<1%THD)
Frequency response: 20Hz - 20kHz
Dimensions: 157 x 46mmO (microphone only)
Weight: 228g (microphone only)

In the box

The box for this item contains :

Studio condenser microphone
Spider shock mount holder
Worktop clamp
Articulated arm mount
Foam pop filter
Gooseneck pop shield
XLR F-M lead 2.5m
Read more
MRP:$47.33 SAVE 33%
 2 in stock $31.59
Citronic USB Studio Condenser Microphone Kit (black)
Citronic USB Studio Condenser Microphone Kit (black) (USB condenser microphone/shock mount/pop filter/pop shield/USB B to A cable/arm mount kit)
Cat: 922274 Rel: 19 Jan 23
 
Complete recording kit comprising a USB condenser microphone with shock mount, pop filter, pop shield, USB type B to A cable and adjustable arm mount with clamp.
Notes: Complete recording kit comprising a USB condenser microphone with shock mount, pop filter, pop shield, USB type B to A lead and adjustable arm mount with clamp. Designed for use with either a PC or Mac computer running a digital recording software suite. The UMK-7 delivers clear vocal or instrument pickup to provide studio quality results from an affordable and uncluttered setup.

Power supply: 5Vdc (from USB)
Capsule16mm: O back electret condenser
Polar pattern: Cardioid
Sensitivity: -48dB +/-2dB @ 1kHz (0dB = 1V/Pa)
Output impedance: 150 Ohms
S/N ratio: 78dB
SPL max.132dB @ 1kHz: (<1%THD)
Frequency response: 30Hz - 18kHz
Dimensions: 157 x 46mmO (microphone only)
Weight: 206g (microphone only)

In the box

The box for this item contains :

USB studio condenser microphone
Spider shock mount holder
Worktop clamp
Articulated arm mount
Foam pop filter
Gooseneck pop shield
USB B to A lead 1.5m
Read more
MRP:$47.33 SAVE 18%
 2 in stock $38.91
CoverUp Pro Ableton Push 1 & Push 2 Desktop Stand
Cat: 959743 Rel: 14 Nov 23
 
Stand designed for the Ableton Push 1 or Push 2.
Notes: These supports allow the equipment to be used in an inclined position in such a way that its operation is more comfortable.

The two feet that support the equipment are connected by two 6mm wooden rods. that give it greater stability and prevents the feet from separating.

The temples and the silicone legs are included.
Read more
Tags: Stands
MRP:$51.54 SAVE 11%
 1 in stock $45.75
Click for better price!
or call +44 20 7424 1960
quote 959743
CoverUp Pro Akai Professional APC40 MKII Desktop Stand
Cat: 959728 Rel: 20 Feb 24
 
Stand designed for the Akai Professional APC40 MKII.
Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.
Read more
 1 in stock $45.49
Click for better price!
or call +44 20 7424 1960
quote 959728
CoverUp Pro Akai Professional APC40 MKII Elevated Desktop Stand
Cat: 959727 Rel: 24 Oct 23
 
Elevated stand designed for the Akai Professional APC40 MKII.
Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.
Read more
Tags: Stands
 1 in stock $47.07
Click for better price!
or call +44 20 7424 1960
quote 959727
CoverUp Pro Akai Professional Force Desktop Stand
Cat: 959729 Rel: 21 Feb 24
 
Stand designed for the Akai Professional Force.
Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.
Read more
 1 in stock $47.60
Click for better price!
or call +44 20 7424 1960
quote 959729
CoverUp Pro Native Instruments Maschine MK3 Desktop Stand
Cat: 959744 Rel: 23 Oct 23
 
Stand designed for Native Instruments Maschine MK3.
Notes: One of Native's latest creations has its ergonomic stand ready for studying.

Now you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.

At the base, there are 3m rubber feet so that the equipment does not move at any time.

Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm
Read more
Tags: Stands
 1 in stock $47.07
Click for better price!
or call +44 20 7424 1960
quote 959744
CoverUp Pro Roland SH-4D 15 Degree Desktop Stand
Cat: 968738 Rel: 23 Oct 23
 
Stand designed for the Roland SH-4D.
Notes: Durability is a key feature of this stand. We understand the demands of a busy studio environment, and we've built this stand to withstand the test of time. Its sturdy construction ensures stability and reliability, providing a secure base for your equipment. This way, you can focus on creating music with confidence, knowing that your gear is well-supported.

At the core of CoverUp's production process is the use of recycled sticky woods. By repurposing and transforming these materials into an innovative stand, we give new life to what was once considered waste. With this sustainable approach, we not only reduce the strain on natural resources but also promote a circular economy, where materials are reused and repurposed to minimize waste.

Beyond its practicality, the Stand adds a touch of elegance to your studio setup. Its sleek design and natural wood texture provide a visually appealing backdrop for your synth, elevating the overall aesthetics of your workspace. The stand seamlessly integrates with any decor style, allowing you to create a studio environment that inspires your creativity.

Keep your studio organized and optimized for productivity with the Stand. Its compact footprint and efficient design ensure that your workspace remains clutter-free, giving you the freedom to focus on your music. With everything neatly organized and within reach, you can streamline your production process and unleash your artistic potential.

Upgrade your music production setup with the Stand. Experience the perfect blend of ergonomic design, durability, and sustainability. By choosing this stand, you're not only investing in a high-quality product but also making a positive impact on the environment. Embrace the future of music production with this exceptional stand that combines functionality with sustainability.
Read more
Tags: Stands
 1 in stock $44.71
Click for better price!
or call +44 20 7424 1960
quote 968738
CoverUp Pro Roland SP-404 Desktop Stand
Cat: 955461 Rel: 23 Oct 23
 
Stand for Roland SP-404
Notes: Introducing the Stand for Roland SP404 - the ultimate companion for elevating your music production experience to new heights while keeping your studio organized. Crafted with ergonomic design and durability in mind, this stand is meticulously engineered to enhance your creativity and provide a sustainable solution for your studio setup.

Constructed using eco-friendly PLA material, this stand showcases Coverup's commitment to sustainability. The PLA material is derived from plant-based sources, making it biodegradable and renewable. By opting for this ecological material, your studio setup not only looks great but also minimizes its impact on the environment.

The ergonomics of the Stand for Roland SP404 Synth have been carefully considered to optimize your workflow and enhance your comfort. Its thoughtfully designed angles and heights create a natural and relaxed position, allowing you to focus on your music without straining your wrists or experiencing discomfort. The result? A more enjoyable and productive music production process.

Additional information
Weight: 0,300 kg
Dimensions: 24 × 17 × 90 cm

Durability is a key feature of this stand. This stand has been to withstand the test of time with the demands of a busy studio environment. Its sturdy construction ensures stability and reliability, providing a secure base for your Roland SP404 Synth. This way, you can focus on creating music with confidence, knowing that your gear is well-supported.

At the core of the production process is the use of recycled sticky woods. By repurposing and transforming these materials into an innovative stand, this gives
new life to what was once considered waste. With this sustainable approach, it not only reduces the strain on natural resources but also promote a circular economy, where materials are reused and repurposed to minimize waste.

Beyond its practicality, the Stand for Roland SP404 adds a touch of elegance to your studio setup. Its sleek design and natural wood texture provide a visually appealing backdrop for your synth, elevating the overall aesthetics of your workspace. The stand seamlessly integrates with any decor style, allowing you to create a studio environment that inspires your creativity.

Keep your studio organized and optimized for productivity with the Stand for Roland SP404 . Its compact footprint and efficient design ensure that your workspace remains clutter-free, giving you the freedom to focus on your music. With everything neatly organized and within reach, you can streamline your production process and unleash your artistic potential.

Upgrade your music production setup with the Stand for Roland SP404 today. Experience the perfect blend of ergonomic design, durability, and sustainability. By choosing this stand, you're not only investing in a high-quality product but also making a positive impact on the environment. Embrace the future of music production with this exceptional stand that combines functionality with sustainability.
Read more
Tags: Stands
 1 in stock $47.07
Click for better price!
or call +44 20 7424 1960
quote 955461
CoverUp Pro Teenage Engineering EP-133 KO II Standalone Live Stand
Cat: 1000875 Rel: 20 Feb 24
 
Stand designed to fit the Teenage Engineering EP-133 KO II audio sampler
Notes: This ergonomic stand model is specially designed for the new sampler/sequencer by Teenage Engineering. To achieve a more comfortable use of this beautiful machine, we decided to offer two possible positions: Studio and Live.

The Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.

Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.
Read more
 1 in stock $45.49
Click for better price!
or call +44 20 7424 1960
quote 1000875
CoverUp Pro Teenage Engineering EP-133 KO II Standalone Studio Stand
Cat: 1000879 Rel: 20 Feb 24
 
Stand designed to fit the Teenage Engineering EP-133 KO II audio sampler
Notes: This ergonomic stand model is specially designed for the new sampler/sequencer by Teenage Engineering. To achieve a more comfortable use of this beautiful machine, we decided to offer two possible positions: Studio and Live.

The Studio version has a higher angle and elevation, allowing it to be placed in our setup without obstructing rear connectors of other equipment. The Live version has a lower angle, and the front of the EP-133 remains at the level of the supporting surface. This facilitates its use while standing.

Both versions have silicone pads on their bottom to prevent slipping or scratching the surface where it rests. The wooden rods that connect both sides of the stand provide rigidity and stability to the assembly.
Read more
 1 in stock $45.49
Click for better price!
or call +44 20 7424 1960
quote 1000879
Crazy Tube Circuits XT Footswitch Jr. For Sidekick Jr.
Cat: 969287 Rel: 18 Oct 23
 
Footswitch designed for the Sidekick Jr.
Notes: External footswitch. Accessory for Sidekick JR.

Use the XT footswitch to control the operation of the modulation section of the Sidekick JR independently. Engage or true bypass the modulation effect.

XT footswitch bypasses the onboard modulation operation assign toggle switch of the Sidekick JR.

Connect to the XT jack input of the pedal.

Passive operation - no power needed for the XT footswitch to operate properly - use standard TS instrument jacks / cable only.

XT footswitch function is not affected by the power-up bypass/engage preset function of the onboard footswitches of Sidekick JR.

Dimensions (W x L x H) : 54 x 51 x 49 mm
Weight 0.91 kg
Made in Greece
Read more
 1 in stock $49.96
Click for better price!
or call +44 20 7424 1960
quote 969287
Decksaver 1010 Music Blackbox & Bluebox Dust Cover
Decksaver 1010 Music Blackbox & Bluebox Dust Cover (sampler/mixer/recorder dust cover)
Cat: 804759 Rel: 21 Dec 20
 
Polycarbonate shell cover for 1010 Music Blackbox
Notes: Custom engineered in the UK for the 1010 Music Blackbox Sampler & Bluebox Mixer & Recorder, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $31.54
Decksaver Ableton Push 2 Dust Cover
Decksaver Ableton Push 2 Dust Cover (MIDI controller dust cover)
Cat: 600910 Rel: 16 Feb 16
 
Protective polycarbonate cover specifically designed to fit Ableton Push 2 controller
Notes: Engineered specifically for the Ableton Push 2 controller. Tough but lightweight polycarbonate shell protects from damaging elements such as smoke, dust, liquid and accidental impact.

Precision moulded for an exact fit whilst accommodating cables, your Push 2 can sit ready for operation. Slides straight into a flight case or controller bag ready for transportation. Shields delicate controls from damage in the studio, in transit and on stage.
Read more
MRP:$47.33 SAVE 27%
 1 in stock $34.56
Decksaver Ableton Push 3 Dust Cover
Decksaver Ableton Push 3 Dust Cover (MIDI controller dust cover)
Cat: 965227 Rel: 05 Oct 23
 
Dust cover designed for Ableton Push 3.
Notes: Introducing the ultimate guardian for your prized Ableton Push 3 - the Decksaver cover! Unlock the full potential of your music production powerhouse while ensuring it remains in pristine condition for years to come. Crafted with meticulous precision and unrivalled expertise, our lid is designed to complement the brilliance of your Ableton Push 3.

The Ableton Push 3 is more than just a controller; it's a gateway to a world of limitless creativity. Its seamless integration with Ableton Live empowers you to bring your musical ideas to life with unparalleled ease. However, with great innovation comes the responsibility to protect your investment from the challenges of the studio and the stage.

This Decksaver cover is built to provide an impenetrable shield against dust, dirt, liquid spills, and accidental knocks. Made from premium-quality polycarbonate (to our own unique recipe), this cover ensures your Ableton Push 3 remains immaculate and free from wear and tear, so you can focus solely on the creative duties of making music.

Designed with precision, the custom-fit mould embraces your Push 3 like a second skin. Whether you're performing live, producing in the studio, or taking your music on the road, our cover ensures your creative flow remains uninterrupted.

As pioneers in protective solutions for musical gear, Decksaver takes immense pride in our stringent quality standards. The design for the Ableton Push 3 Decksaver cover has been rigorously tested to meet the highest level of fit, durability and reliability, ensuring it withstands the demands of your musical journey.

Join the league of top-tier music producers and DJs who trust Decksaver to safeguard their musical instruments. Elevate your music production experience with the confidence that your Ableton Push 3 is cocooned in some of the finest protection available.

Seize the opportunity to explore new sonic dimensions and compose your musical opus without worry. Choose Decksaver, choose excellence, and choose to take your music production to new heights with the Ableton Push 3 Decksaver cover.

Your journey to sonic greatness starts here!

Dimensions

Weight: 0.7 kg
Length: 38.8 cm
Width: 32.5 cm
Height: 4.5 cm

Material: Smoked clear polycarbonate.
Read more
 4 in stock $45.22
Click for better price!
or call +44 20 7424 1960
quote 965227
Decksaver Akai MPC Live & MPC Touch Dust Cover
Cat: 630036 Rel: 21 Oct 16
 
Protective equipment cover specifically designed to fit the Akai MPC Live & MPC Touch
Notes: Custom engineered for the Akai MPC Live and MPC Touch. This super durable polycarbonate shell protects your controller from damaging elements such as smoke, dust, liquids and impact. Precision trimmed for perfect fit whilst accommodating cables, the MPC Live/Touch can sit ready for operation. Slides straight into a flight case or controller bag, ideal for transportation. Shields delicate faders, controls and internal components from damage at home, on the road or in the club.
Read more
 1 in stock $41.55
Click for better price!
or call +44 20 7424 1960
quote 630036
Decksaver Akai Professional APC40 MK2 Dust Cover
Cat: 551851 Rel: 30 Oct 14
 
Dust cover designed to fit the Akai Professional APC40 MK2
Notes: The APC40 MK2 has solidified its reputation as a cutting-edge MIDI controller, admired by musicians for its seamless integration with Ableton Live and advanced features. Its intuitive workflow, extensive control options, and enhanced performance capabilities make it an indispensable tool for DJs, producers, and live performers alike.

Understanding the importance he of safeguarding this valuable piece of equipment, we have developed a tailored solution: the Decksaver cover. Designed with meticulous precision, our custom-molded polycarbonate cover is crafted to perfectly fit the contours of the APC40 MK2, ensuring optimal protection.

Our Decksaver cover offers comprehensive safeguarding against a range of potential hazards, including dust, spills, and accidental impacts. Constructed from high-quality polycarbonate material, our cover provides exceptional durability, ensuring the longevity of your APC40 MK2.

With a Decksaver cover adorning your APC40 MK2, you can perform with confidence in any setting. Whether you're on stage, in the studio, or on the move, our cover delivers reliable protection, preserving the pristine condition of your MIDI controller. Trust in Decksaver to provide the ultimate shield for your valuable APC40 MK2, ensuring its longevity and uninterrupted performance for years to come. Let your creativity thrive, knowing that your APC40 MK2 is safeguarded by the unparalleled protection of Decksaver.

Key features:
Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, switches and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Dimensions:
Weight 0.42 kg
Length 42.6 cm
Width 25.6 cm
Height 2.6 cm
Read more
MRP:$49.44 SAVE 15%
 1 in stock $42.07
Click for better price!
or call +44 20 7424 1960
quote 551851
Decksaver Akai Professional MPC Live II Dust Cover
Decksaver Akai Professional MPC Live II Dust Cover (music production centre dust cover)
Cat: 796099 Rel: 18 Nov 20
 
Dust cover designed to fit the Akai Professional MPC Live II, MPC Live II Beatclub Edition & MPC Live II Timbaland Edition
Notes: Units like the Akai MPC Live 2 sequencer are music-production powerhouses - they are the fulcrum of your setup and cannot go unprotected.

Our super durable polycarbonate shell offers protection from dust, spillages and accidental impact.

Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation.

Shields delicate controls and internal components from damage on the road, at home or in the club.

Key features:

Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, pads and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Fits:

MPC Live II Beatclub Edition
MPC Live II Timbaland Edition

Dimensions:

Weight 0.850kgs
Length 41.60cm
Width 24.80cm
Height 3.00cm
Read more
MRP:$42.07 SAVE 13%
 3 in stock $36.55
Decksaver Akai Professional MPC One & MPC One+ Dust Cover
Decksaver Akai Professional MPC One & MPC One+ Dust Cover (music production controller dust cover)
Cat: 791899 Rel: 04 Nov 20
 
Polycaronate shell cover for Akai MPC One Standalone Music Production Controller
Notes: Units like the Akai MPC One sequencer are music-production powerhouses, they are the fulcrum of your setup and simply cannot go unprotected. This super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. The Akai MPC One Standalone Music Production Controller Cover slides straight into a flight case or controller bag, perfect for transportation, and it also shields delicate controls and internal components from damage on the road, at home or in the club.

DIMENSIONS:

Weight: 0.76kg
Length: 28.2cm
Width: 28cm
Height: 3.9cm
Read more
MRP:$42.07 SAVE 13%
 1 in stock $36.55
Decksaver Akai Professional Rhythm Wolf/Tom Cat Light Edition Dust Cover
Cat: 575725 Rel: 08 Jun 15
 
Protect hardcase cover specifically designed to fit the Akai Rhythm Wolf
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue groovebox down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, the Rhythm Wolf can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $21.03
150/434(ページ1/9)の商品
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z すべて
1  2  3  4  5  6  7  8  9  »
Cart subtotal: