安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: Studio Equipment

ホーム  Back Catalogue  

Studio Equipment

Options
150/355(ページ1/8)の商品
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z すべて
1  2  3  4  5  6  7  8  »
Cat: 711995 Rel: 12 Dec 18
 
External power supply for Pod enclosure
Notes: Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15-20V / 90W / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

Compatible power bricks are available wherever ROW POWER modules are sold. You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 30W output power
- Low-noise output

Please note: IEC cable not supplied
Read more
 4 in stock $30.37
Cat: 720435 Rel: 11 Feb 19
 
Bus stick, shrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
Read more
MRP:$46.51 SAVE 17%
 3 in stock $38.75
Cat: 527767 Rel: 14 Apr 14
 
UK mains 240V - 12V current converter for Access Virus TI models
Notes: New replacement power adapter for Access Virus Models that use 12vdc power supplies.

Converter block has figure-of-8 connector and converts a 240V UK mains current to 12V for compatible Access Virus TI models.
Read more
 1 in stock $32.73
Cat: 563703 Rel: 09 Mar 15
 
Spring reverb tank for Intellijel Springray module, large size
Notes: Large sized spring reverb tank, Accutronics 9BB2C1B with 3×2 springs and medium decay (1.75 - 3 seconds).
Read more
 1 in stock $35.10
Cat: 458032 Rel: 02 Jun 12
 
8-point balanced patchbay
Notes: The ARTcessories TPatch is a compact 8-point balanced patchbay that organises your cables into a convenient central location on your studio desktop. Designed for maximum flexibility, the TPatch has 1/4" TRS phone connectors user selectable normal and half-normal modes.

The compact black-anodized all aluminum case and it's passive design allow the TPatch to provide years of trouble free service.

The specifications:

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions (mm): 47 H x 117 W x 99 D
Weight: 0.38kg

Connectors: 1/4" TRS balanced phone jacks
CMRR: > -90 dB (typical)
Isolation: > -80 dB (typical)
Dimensions: 47mm x 117mm x 99mm
Weight: 0.38kg.
Read more
 2 in stock $42.29
Click for better price!
or call +44 20 7424 1960
quote 458032
Cat: 699920 Rel: 06 Nov 18
 
Pack of 100 Knurlies Eurorack M2.5 rack screws
Notes: 100 of Befaco's unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.

Each Knurlie comes with a fitted plastic washer to prevent rack rash.
Read more
 More than 10 in stock $30.86
Cat: 668667 Rel: 09 Nov 17
 
Pack of 100 screws specially designed for Eurorack
Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!

Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.

These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.
Read more
 More than 10 in stock $33.51
Cat: 486281 Rel: 11 Apr 13
 
4 channel line mixer ideal for boosting main mixer input options
Notes: Despite its ultra-compact size, this 4-channel line mixer is big on features! It yields the highest sonic quality at all output levels, boasting ultra low-noise 4580 operational amplifiers for outstanding audio performanceithe same op amps found in its much bigger brethren. Expanding on the capabilities of standard-size mixers is where the MX400 does extremely well, for example as a sub-mixer. If you are running short on available channels on your main mixer and need to bring the output of three different keyboards into your mix, you can simply connect them to the MX400, work out the keyboard mix, and connect the MX400's output to a single input on your main mixer. It will catch your eye because it's cute as a button, but you'll want to own one because of what it can do for your performance.

Read more
 More than 10 in stock $26.75
Cat: 600910 Rel: 16 Feb 16
 
Protective polycarbonate cover specifically designed to fit Ableton Push 2 controller
Notes: Engineered specifically for the Ableton Push 2 controller. Tough but lightweight polycarbonate shell protects from damaging elements such as smoke, dust, liquid and accidental impact.

Precision moulded for an exact fit whilst accommodating cables, your Push 2 can sit ready for operation. Slides straight into a flight case or controller bag ready for transportation. Shields delicate controls from damage in the studio, in transit and on stage.
Read more
 9 in stock $36.65
Cat: 499558 Rel: 29 Jul 13
 
Premium polycarbonate decksaver for Ableton Push controller
Notes: The perfect way to protect your Ableton Push. Designed and manufactured in the UK and precision engineered from premium quality polycarbonate, (the same plastic used in bullet-proof glass), this cover sits securely over your deck with no fixing, modification or adhesive required. The cover is easily mounted and removed in seconds and it will protect from dust, dirt and spillages, and will even shield the deck from scratches, impact or collision. Unlike ugly flightcases or tacky stickers, the decksaver maintains the attractive styling of the Ableton Push whilst offering a level of protection like no other. You'll see the decksaver used and endorsed by clubs, bars and studios nationwide.
Read more
 2 in stock $38.75
Cat: 551851 Rel: 30 Oct 14
 
Protective Decksaver specifically designed to fit Akai Pro APC40 MK2
Notes: Decksaver Pro. Designed and engineered in the UK
Read more
 1 in stock $36.65
Cat: 600913 Rel: 16 Feb 16
 
Protective & lightweight polycarbonate cover specifically designed to fit Arturia Beatstep Pro controller
Notes: Engineered specifically for the Arturia Beatstep Pro controller. Tough but lightweight polycarbonate shell protects from damaging elements such as smoke, dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Beatstep can sit ready for operation.

Slides straight into a flight case or controller bag ready for transportation. Shields delicate controls from damage in the studio, in transit and on stage.

*Please note Arturia Beatstep is not included
Read more
 3 in stock $20.94
Cat: 575733 Rel: 08 Jun 15
 
Protective equipment hardcase cover specifically designed to fit the Arturia Microbrute
Notes: Light Edition Cover - still made from super durable polycarbonate but reaching you at a more affordable cost.

The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good synth down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, the MicroBrute can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation whilst preserving your settings - important for a non-preset machine. Shields delicate keys, controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $27.23
Cat: 575735 Rel: 08 Jun 15
 
Protective synth hardcase specifically designed to fit the Arturia Minbrute
Notes: The tools we use to compose and produce music are dear to our hearts.

The studio elements of dust, smoke and liquid have taken many a good synth down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, the MiniBrute can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate keys, controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $34.83
Decksaver Boss RC505 Cover (polycarbonate shell cover)
Cat: 766129 Rel: 28 Feb 20
 
polycarbonate shell cover
Notes: The tools we use to compose and perform music are dear to our hearts. Dust, liquid and accidental impact have taken many a good looper down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the RC-505 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $41.90
Click for better price!
or call +44 20 7424 1960
quote 766129
Cat: 678141 Rel: 27 Feb 18
 
Protective dust cover, custom moulded to fit the Dave Smith Instruments Tempest drum machine
Notes: The Dave Smith Instruments Tempest cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the Tempest can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $41.90
Click for better price!
or call +44 20 7424 1960
quote 678141
Cat: 575737 Rel: 08 Jun 15
 
Protective hardcase cover specifically designed to fit the Korg Electribe 2
Notes: Custom engineered for the Korg Electribe 2, protects your unit from damaging elements such as smoke, dust, liquids and impact.

Precision trimmed for perfect fit whilst accommodating cables, the Electribe can sit ready for operation.

Slides straight into a flight case or controller bag, ideal for transportation.

Shields delicate faders, controls and internal components from damage at home, on the road or in the club.
Read more
$35.45 SAVE 20%
 2 in stock $28.36
Cat: 618310 Rel: 06 Jul 16
 
Fitted hard cover specifically designed to fit the Korg Minilogue
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in.

Precision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate controls and internal components from damage at home, on the road and on stage.

*Photographed Korg Minilogue keyboard is not included
Read more
 5 in stock $40.84
Click for better price!
or call +44 20 7424 1960
quote 618310
Cat: 563052 Rel: 25 Feb 15
 
Polycarbonate protective cover, specifically designed to fit Korg MS20 Mini synth
Notes: Polycarbonate protective cover, specifically designed to fit Korg MS20 Mini synth
Read more
 1 in stock $46.08
Click for better price!
or call +44 20 7424 1960
quote 563052
Cat: 551856 Rel: 24 Oct 14
 
Fits Volca Keys, Volca Bass & Volca Beats
Notes: Decksaver Pro. Designed and engineered in the UK
Read more
 2 in stock $22.97
Cat: 678140 Rel: 27 Feb 18
 
Protective dust cover, custom moulded to fit the Moog Minitaur controller
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good synth down over the years. This is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the Minitaur can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation whilst preserving your settings. Shields delicate keys, controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $35.10
Cat: 630037 Rel: 21 Oct 16
 
Protective equipment cover specifically designed to fit the Moog Sub 37 & Little Phatty
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, your Moog can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $40.10
Click for better price!
or call +44 20 7424 1960
quote 630037
Cat: 520389 Rel: 03 Feb 14
 
Polycarbonate protective cover to fit Native Instruments Maschine studio controller
Notes: Engineered specifically for the NI Maschine Studio controller. Designed for the Digital DJ. The tough polycarbonate shell design is lightweight and impact resistant.

Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag - perfect for transportation. The cover shields delicate faders and knobs from damage - on the road, in the home, or at the club!
Read more
 1 in stock $37.70
Cat: 600912 Rel: 16 Feb 16
 
Protective polycarbonate cover specifically designed to fit Novation Circuit controller
Notes: The tools we use to compose and produce music are dear to our hearts.

The studio elements of dust, smoke and liquid have taken many a good unit down over the years. This is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, your Novation Circuit can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage in the studio, in transit and on stage.

*Please note, Novation Circuit is not included*
Read more
 1 in stock $26.98
Cat: 589874 Rel: 23 Nov 15
 
Protective equipment cover specifically designed to fir the Novation Launch Control XL
Notes: Engineered specifically for the Novation Launch Control XL controller. Tough but lightweight polycarbonate shell protects from damaging elements such as smoke, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launch Control XL can sit ready for operation. Slides straight into a flight case or controller bag ready for transportation.

Shields delicate controls from damage on the road, at home or in the club.
Read more
 1 in stock $29.85
Decksaver Novation Launch Pad X Cover (polycarbonate shell cover)
Cat: 766126 Rel: 28 Feb 20
 
polycarbonate shell cover for Launchpad X
Notes: Engineered in the UK specifically for the Novation Launchpad X Controller, a tough but lightweight polycarbonate shell protects from dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launchpad X can sit ready for operation. Slides straight into a bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $30.65
Decksaver Novation Launchpad Mini Cover (polyarbonate shell cover)
Cat: 766127 Rel: 28 Feb 20
 
polycarbonate shell cover
Notes: Engineered in the UK specifically for the Novation Launchpad Mini Controller, a tough but lightweight polycarbonate shell protects from dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launchpad Mini can sit ready for operation. Slides straight into a bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 3 in stock $29.59
Cat: 589872 Rel: 23 Nov 15
 
Protective equipment cover specifically designed to fit the Novation Launchpad Pro
Notes: Engineered specifically for the Novation Launchpad Pro controller. Tough but lightweight polycarbonate shell protects from damaging elements such as smoke, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launchpad Pro can sit ready for operation. Slides straight into a flight case or controller bag ready for transportation.

Shields delicate controls from damage on the road, at home or in the club.
Read more
 1 in stock $30.65
Decksaver Novation Launchpad Pro Mk3 Cover (polycarbonate shell cover)
Cat: 766124 Rel: 28 Feb 20
 
polycarbonate shell cover
Notes: Engineered in the UK specifically for the Novation Launchpad Pro MK3 Controller, a tough but lightweight polycarbonate shell protects from dust, liquid and accidental impact. Precision moulded for an exact fit whilst accommodating cables, your Launchpad Pro MK3 can sit ready for operation. Slides straight into a bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 2 in stock $30.65
Cat: 661387 Rel: 30 Aug 17
 
Protective dust cover specifically designed to fit the Novation Peak
Notes: Our Novation Peak Cover is the first Decksaver to feature Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $43.98
Click for better price!
or call +44 20 7424 1960
quote 661387
Cat: 589875 Rel: 23 Nov 15
 
Protective equipment cover specifically designed to fit Roland AIRA MX-1
Notes: The tools we use to compose, perform and mix music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good unit down over the years. This is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the Aira MX-1 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $38.99
Cat: 551853 Rel: 24 Oct 14
 
Decksaver protective case specifically designed to fit Roland Aira System 1
Notes: Decksaver Pro. Designed and engineered in the UK
Read more
 1 in stock $40.84
Click for better price!
or call +44 20 7424 1960
quote 551853
Cat: 551854 Rel: 24 Oct 14
 
Decksaver protective cover specifically designed for Roland Aira TR8
Notes: Engineered specifically for the Roland Aira TR-8, the Decksaver TR-8 cover is a tough polycarbonate shell that is lightweight and impact resistant. Precisely engineered to fit, leaving cables in place, it shields delicate faders and knobs from dust, scratches and damage, to protect your investment at home, in the studio or on the road.
Read more
 1 in stock $30.12
Cat: 551859 Rel: 24 Oct 14
 
Decksaver protective cover specifically designed to fit Roland Aira VT3
Notes: Decksaver Pro. Designed and engineered in the UK
Read more
 1 in stock $22.53
Decksaver Roland TB303 Cover (equipment cover)
Cat: 661390 Rel: 30 Aug 17
 
Protective dust cover specifically designed to fit the Roland TB303
Notes: Cult vintage grooveboxes like Roland's TB-303 are practically museum pieces, especially in pristine condition. For one to come to any harm doesn't bear thinking about! The studio elements of dust, smoke and liquid have taken many a good 303 down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the tr-303 can sit ready for operation. These beautiful machines are without doubt an investment worth protecting as prices continue to soar.
Read more
 2 in stock $29.59
Decksaver Roland TR808 Cover (equipment cover)
Cat: 589881 Rel: 23 Nov 15
 
Protective equipment cover specifically designed to fit Roland TR-808
Notes: Cult vintage drum machines like Roland's TR-808 are practically museum pieces, especially in pristine condition. For one to come to any harm doesn't bear thinking about! The studio elements of dust, smoke and liquid have taken many a good 808 down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, the tr-808 can sit ready for operation.

These beautiful machines are without doubt an investment worth protecting as prices continue to soar.
Read more
 1 in stock $39.80
Decksaver Roland TR909 Cover (equipment cover)
Cat: 589882 Rel: 23 Nov 15
 
Protective equipment cover specifically designed to fit Roland TR-909
Notes: Cult vintage drum machines like Roland's TR-909 are practically museum pieces, especially in pristine condition. For one to come to any harm doesn't bear thinking about! The studio elements of dust, smoke and liquid have taken many a good 909 down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, the TR-909 can sit ready for operation.

These beautiful machines are without doubt an investment worth protecting as prices continue to soar.
Read more
 1 in stock $39.80
Cat: 630040 Rel: 21 Oct 16
 
Protective equipment cover specifically designed to fit the Teenage Engineering OP1
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the OP-1 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 3 in stock $26.98
Cat: 589869 Rel: 23 Nov 15
 
Protective equipment cover specifically designed to fit the Universal Audio Apollo Twin
Notes: Custom moulded from super-durable polycarbonate to fit the contours of the Universal Audio Apollo Twin audio interface. An integral and vital part of countless producer's setups, we wouldn't like to wager how many sessions have been ruined by misplaced coffees and beers infiltrating these units.

The Decksaver Universal Audio Apollo Twin cover offers insurance against these little disasters.

Fits:

Apollo Twin MK1 (windows & mac)
Apollo Twin MK2 Solo / Duo / Quad
Read more
 2 in stock $33.79
Cat: 553191 Rel: 29 Oct 14
 
3 button footswitch for control over selected Digitech effects pedals
Notes: The DigiTech FS3X is a welcomed addition to several DigiTech products; The Jimi Hendrix Experience, The JamMan and Expression Factory to name a few. The FS3X provides increased functionality and convenient Hands-free control over UP/DOWN selection of Models, Mode changes, Loop selection, auto START/STOPS and arms auto record where applicable.

Compact and portable its small foot-print takes very little space on stage or in your gig bag. Durable 3 button metal chassis construction. A 10' stereo TRS cable is included with each unit.
Read more
 1 in stock $26.17
Cat: 755436 Rel: 12 Nov 19
 
Passive Eurorack bus board
Notes: The A-100BUS from Doepfer is a simple passive busboard for use with Eurorack modules. It features 14 power headers along with three sets of spade terminals for connection to power supplies such as the Doepfer PSU3 and daisy-chaining with other A-100 bus boards.
Read more
 1 in stock $37.70
Notes: Bus board to connect 14 modules

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).

In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.

The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.
Read more
 1 in stock $35.10
Cat: 719337 Rel: 04 Feb 19
 
4 socket extension reel with integrated carry handle and overload cutout - 15 metre length
Notes: A 4 socket extension reel with integrated carry handle and overload cutout with reset button. Maximum current when used fully wound is 5 A. Maximum current when used fully unwound is 13 A.

Suitable for Home or Office Use
4 UK Socket Outlets
Handbag Design for Ease of Transport
Read more
 1 in stock $20.94
Cat: 719338 Rel: 04 Feb 19
 
Extension reel with stand, carry handle and over heat protection - 15 metre length
Notes: A Red and Black 4 socket extension reel with stand, carry handle and over heat protection. 4.4 A maximum current fully wound, 13 A maximum current fully unwound.

Indoor use only
Designed for UK usage
With carry handle for ease of transport
Read more
 1 in stock $25.67
Cat: 758855 Rel: 05 Dec 19
 
Eurorack cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
Read more
 2 in stock $24.08
Cat: 755444 Rel: 05 Nov 19
 
Eurorack cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
Read more
 More than 10 in stock $29.58
Cat: 742138 Rel: 14 Aug 19
 
Adapter cable, 10cm
Notes: 2.5mm TRS male to 5-pin DIN MIDI female adapter for UNO Synth & UNO Drum - 10cm / 3.9". Also suitable for other MIDI interfaces using 2.5mm TRS to 5-pin DIN MIDI.
Read more
 2 in stock $30.82
Cat: 654073 Rel: 02 Nov 17
 
Micro-USB-OTG to Mini-DIN cable
Notes: Android Micro-USB-OTG to Mini-DIN cable for iRig HD-A, iRig HD, iRig Pro, iRig Pro Duo, iRig MIDI 2.

- 60cm / 23.6"
Read more
 4 in stock $31.41
IK Multimedia PSU For iRig Mix (power supply unit)
Cat: 654061 Rel: 02 Nov 17
 
Power supply unit
Notes: PSU for IK Multimedia iRig Mix mobile mixer.
Read more
 1 in stock $42.94
Click for better price!
or call +44 20 7424 1960
quote 654061
Cat: 755449 Rel: 21 Nov 19
 
Protective carry case for your Uno Drum
Notes: To protect your UNO Drum when you're carrying it around, you can order the UNO Drum Travel Case, a durable, 100% polyester case featuring a stitched-in UNO Drum logo.

Size: 11.8" (30cm) x 7.8" (20cm) x 3.1" (8cm)
Read more
 1 in stock $38.40
150/355(ページ1/8)の商品
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z すべて
1  2  3  4  5  6  7  8  »

Filter

Back Catalogue: Studio Equipment
Release Date
Close