安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: Studio Equipment

ホーム  Back Catalogue  

Studio Equipment

Options
150/2,273(ページ1/46)の商品
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z すべて
1  2  3  ...  46  »
1010 Music Blackbox Portable Sampler & Groovebox With Sequencing & Effects
Cat: 731197 Rel: 24 Jun 19
 
Compact sampling studio
Notes: Innovative little sampler groovebox. Works as a standalone unit or as a sequencer for other gear. A nice left-field alternative to the usual MPCs and Electribes.

Supplier's notes:
Blackbox is a portable sampler and groovebox that lets you record, save/load, apply effects and edit one-shot samples and beat-sliced loops. Create sequences with samples by tapping on pads, playing a virtual keyboard, using external MIDI controllers or by drawing-in notes using a standard Piano Roll editor on a fast touchscreen interface. Sequences can be played back to create song sections and entire compositions. Finish your song by mixing it, adding stereo effects and by saving it as a Preset for fast and easy recall.

Perform songs live and trigger samples on the fly. Blackbox makes it easy to create and perform music anywhere thanks to its compact and rock-solid hardware design. Just throw it in a backpack and hit the club.

Record hours of song ideas, jam sessions, and performances thanks to a microSD slot that enables you to expand internal memory.

Blackbox comes with gigabytes of premium samples and loops by SoundTrack Loops and Loopmasters to let you start making beats right out of the box.

Blackbox - your own personal sampler.

What Is Included:

- Blackbox compact sampling studio
- MicroSD card with blackbox firmware, about 60 presets and approximately 900 WAV files
- USB power cable and USB wall wart with 3 international adapters
- 2 MIDI Adapters - Male 3.5mm TRS to Female 5 pin DIN, MIDI Class B standard
- Quick Start guide to get you playing right away
Read more
 9 in stock $596.63
Click for better price!
or call +44 20 7424 1960
quote 731197
2hp Zero HP Mult Cable Splitter (green with white artwork)
2hp
Cat: 782932 Rel: 23 Jul 20
 
Cable splitter
Notes: Just when you thought 2HP couldn't go any smaller, the Zero HP Mult has now arrived! The ZHM a 1 to 5 cable splitter, providing utility outside your case for increased patchabilty. Whether it is sending out a master clock, modulation, or simply lengthening a cable to reach the far ends of your rack, the Zero HP Mult is ready for duty!
Read more
MRP:$6.53 SAVE 17%
 2 in stock $5.44
4ms 10 Pin Multi Power Cable
4ms 10 Pin Multi Power Cable (Eurorack power cable)
Cat: 711993 Rel: 12 Dec 18
 
Flexible power cable for Eurorack modules
Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.
Read more
MRP:$7.84 SAVE 24%
 6 in stock $5.98
4ms 16 Pin Multi Power Cable
4ms 16 Pin Multi Power Cable (Eurorack power cable)
Cat: 711994 Rel: 12 Dec 18
 
Flexible power cable for Eurorack modules
Notes: 16-conductor ribbon cable with four 16-pin connectors (20" total length), for connecting more than 2 modules in a Pod.
Read more
MRP:$7.84 SAVE 24%
 7 in stock $5.98
4ms 1HP Blank Panel (black)
Cat: 725495 Rel: 15 Apr 19
 
Official 1HP 4ms blank panel
Notes: Make Noise blank panel - 1HP width. Black coloured PCB material with Make Noise logo.
Read more
MRP:$5.23 SAVE 27%
 9 in stock $3.82
4ms 2HP Blank Panel (black)
Cat: 725496 Rel: 15 Apr 19
 
Official 2HP 4ms blank panel
Notes: Make Noise blank panel - 2HP width. Black coloured PCB material with Make Noise logo.
Read more
MRP:$5.23 SAVE 22%
 8 in stock $4.09
4ms 3 Pin Audio Jumper Cable For Connecting Listen Series & Wav Recorder Modules
Cat: 725492 Rel: 15 Apr 19
 
Jumper cable for daisy chaining 4ms Listen modules and/or 4ms WAV recorder
Notes: The Audio Jumper 3-pin cable can be used to connect two Listen 4, Listen 4 Quarters and/or Listen IO modules to form a larger mixer. It's also possible to connect a WAV recorder with a Listen module for direct recording.
Read more
MRP:$2.61 SAVE 27%
 2 in stock $1.91
4ms 45W Power Brick For Pods Or Row Powers (powers 150-250HP)
Cat: 711990 Rel: 12 Dec 18
 
External power supply for Pod enclosure
Notes: Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15V/3A (45W) / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 20W output power
- Low-noise output
Read more
MRP:$18.29 SAVE 17%
 6 in stock $15.10
4ms 45W Power Brick For Pods Or Row Powers (powers 150-250HP) (B-STOCK)
Cat: 785766 Rel: 12 Dec 18
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15V/3A (45W) / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 20W output power
- Low-noise output
Read more
 1 in stock $14.61
4ms 4HP Blank Panel (black)
Cat: 725497 Rel: 15 Apr 19
 
Official 4HP 4ms blank panel
Notes: Make Noise blank panel - 4HP width. Black coloured PCB material with Make Noise logo.
Read more
MRP:$5.23
! low stock $4.90
4ms 6HP Blank Panel (black)
Cat: 725498 Rel: 15 Apr 19
 
Official 6HP 4ms blank panel
Notes: Make Noise blank panel - 6HP width. Black coloured PCB material with Make Noise logo.
Read more
MRP:$5.23
 3 in stock $4.90
4ms 8HP Blank Panel (black)
Cat: 725499 Rel: 15 Apr 19
 
Official 8HP 4ms blank panel
Notes: Make Noise blank panel - 8HP width. Black coloured PCB material with Make Noise logo.
Read more
MRP:$7.84 SAVE 10%
 2 in stock $7.08
4ms 90W Power Brick For Pods Or Row Powers (powers 300-500HP)
Cat: 711995 Rel: 12 Dec 18
 
External power supply for Pod enclosure
Notes: Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15-20V / 90W / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

Compatible power bricks are available wherever ROW POWER modules are sold. You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 30W output power
- Low-noise output

Please note: IEC cable not supplied
Read more
 3 in stock $30.22
4ms Bus Stick With 13 Connectors & Shrouded Headers
Cat: 720435 Rel: 11 Feb 19
 
Bus stick, shrouded
Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.
Read more
MRP:$48.34 SAVE 17%
! low stock $40.28
Click for better price!
or call +44 20 7424 1960
quote 720435
4ms Flying Bus Cable With 7 Connectors & Male Pins
Cat: 752440 Rel: 28 Oct 19
 
Flying bus cable - male pins
Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules.

Can be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.
Read more
MRP:$16.98 SAVE 18%
 More than 10 in stock $13.89
4ms Pod 20 Powered Eurorack Module Enclosure Case
Cat: 706834 Rel: 12 Dec 18
 
20HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$117.59 SAVE 22%
 1 in stock $91.46
4ms Pod 26 Powered Eurorack Module Enclosure Case
Cat: 706837 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$129.34 SAVE 21%
 1 in stock $102.34
Click for better price!
or call +44 20 7424 1960
quote 706837
4ms Pod 26 Unpowered Eurorack Module Enclosure Case
Cat: 706836 Rel: 12 Dec 18
 
26HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 Unpowered is 26HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$71.86 SAVE 26%
 2 in stock $53.34
4ms Pod 32 Beta Powered Eurorack Module Enclosure Case
Cat: 752442 Rel: 25 Oct 19
 
32HP metal enclosure for Eurorack modules with built-in power supply - Beta version
Notes: Limited Beta version of the popular Pod32. These are new, fully tested and functional units. The only difference between the Pod32 Beta and the regular Pod32 is that the Beta version has fewer holes to screw in modules. Most common Eurorack sizes will fit from 4HP to 32HP, but some odd sizes and combinations won't fit. Please refer to the product image, or visit the 4ms website for possible module combinations.

This Pod requires a power brick (not included). Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack module, or add a couple more modules to your monster system!

Made from 100% anodized aluminium, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Read more
MRP:$82.31 SAVE 18%
 1 in stock $67.51
Click for better price!
or call +44 20 7424 1960
quote 752442
4ms Pod 32 Powered Eurorack Module Enclosure Case
Cat: 706840 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$142.41 SAVE 17%
 1 in stock $117.59
Click for better price!
or call +44 20 7424 1960
quote 706840
4ms Pod 32 Unpowered Eurorack Module Enclosure Case
Cat: 706839 Rel: 12 Dec 18
 
32HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 Unpowered is 32HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$77.08 SAVE 17%
 1 in stock $64.23
4ms Pod 34X Powered Eurorack Enclosure Case
Cat: 769782 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

This Pod requires a power brick (not included).

Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:
34HP Pod, black anodized aluminum
Extra deep (2.16"/55mm) fits virtually every Eurorack module
Built-in power supply with four Eurorack power headers
M3 x 8mm pan-head screws, stainless steel (10)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.65A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz
Read more
MRP:$160.70 SAVE 13%
 3 in stock $139.36
Click for better price!
or call +44 20 7424 1960
quote 769782
4ms Pod 34X Unpowered Eurorack Enclosure Case
Cat: 769784 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz
Read more
MRP:$83.62 SAVE 17%
 2 in stock $69.68
Click for better price!
or call +44 20 7424 1960
quote 769784
4ms Pod 40X Powered Eurorack Enclosure Case
Cat: 725502 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X is 40HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$173.76 SAVE 19%
 4 in stock $141.53
Click for better price!
or call +44 20 7424 1960
quote 725502
4ms Pod 48X Powered Eurorack Enclosure Case
Cat: 725517 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$185.52 SAVE 16%
 2 in stock $155.70
Click for better price!
or call +44 20 7424 1960
quote 725517
4ms Pod 48X Unpowered Eurorack Enclosure Case
Cat: 725518 Rel: 12 Apr 19
 
Portable, compact enclosure that turns Eurorack modules into table-top instruments
Notes: The Pod40X Unpowered is 48HP with 2" (51mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$95.37 SAVE 18%
 1 in stock $78.39
Click for better price!
or call +44 20 7424 1960
quote 725518
4ms Pod 60 Powered Eurorack Module Enclosure Case
Cat: 711005 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules with built-in power supply
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.
Read more
MRP:$209.04 SAVE 19%
 1 in stock $169.83
Click for better price!
or call +44 20 7424 1960
quote 711005
4ms Pod 60 Unpowered Eurorack Module Enclosure Case
Cat: 711004 Rel: 12 Dec 18
 
60HP metal enclosure for Eurorack modules
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 Unpowered is 60HP with 1.34" (34mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.
Read more
MRP:$101.91 SAVE 18%
! low stock $83.84
Click for better price!
or call +44 20 7424 1960
quote 711004
4ms Pod 64X Powered Eurorack Enclosure Case
Cat: 769789 Rel: 20 Mar 20
 
Eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz
Read more
MRP:$232.56 SAVE 12%
 3 in stock $203.59
Click for better price!
or call +44 20 7424 1960
quote 769789
4ms Pod 64X Unpowered Eurorack Enclosure Case
Cat: 769793 Rel: 20 Mar 20
 
eurorack enclosure case
Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X Unpowered is 64HP with 2.16" (55mm) of available module depth. No power supply is included, you must supply your means of powering modules with a DIY power supply or a front-facing module such as the Row Power. Two holes on the rear face are plugged with removable plastic plugs, and can be used for DIY applications.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum

Includes:

64HP Pod, black anodized aluminum
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Unpowered: requires you to provide your own Eurorack power system
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.42 kg = 14.9 oz
Read more
MRP:$107.13 SAVE 17%
 2 in stock $89.27
Click for better price!
or call +44 20 7424 1960
quote 769793
4ms Right Angle Barrel Power Cable For Daisy Chaining Row Powers & Pods
Cat: 725489 Rel: 15 Apr 19
 
Right angle 2.1mm barrel plug
Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.

Both ends of the cable have a right-angle plug.
Read more
MRP:$5.23
 7 in stock $4.90
Access Virus TI Replacement External Power Supply
Cat: 527767 Rel: 14 Apr 14
 
UK mains 240V - 12V current converter for Access Virus TI models
Notes: New replacement power adapter for Access Virus Models that use 12vdc power supplies.

Converter block has figure-of-8 connector and converts a 240V UK mains current to 12V for compatible Access Virus TI models.
Read more
 3 in stock $34.02
Access Virus TI2 Darkstar Keyboard Synthesizer
Cat: 527756 Rel: 21 Jul 14
 
Special black/gun metal edition edition of the Virus TI Polar
Notes: There are not many modern synthesizers which can claim to have shaped the sound of music -- from electronica to soundtrack -- as much as the Virus line of synthesizers has. The Virus is known as much for its flexibility and powerful sound as for Total Integration, our award winning way to interconnect a hardware synthesizer with your DAW.

The first Virus was released in 1997 and each new iteration has added more features more powerful hardware, and greater musical potential. That evolution explains why the Virus TI series is so sought after and why it receives such praise from owners, press, and fans all over the world.

Artists including Depeche Mode, Madonna, Linkin Park and The Prodigy tour with a Virus-based setup. Producers such as Sasha, Pete Tong, Roger Sanchez and Dr. Dre consider the Virus a core part of their studios. Composers such as Hans Zimmer, James Newton Howard, John Powell and Mark Isham are enthusiastic Virus users, utilising its signature sound for their Hollywood blockbuster soundtracks.

The Virus TI line of synthesizers includes 4 different variations: two keyboard models and two desktop versions. The great news is that all of these instruments produce the same award-winning sound. In this way, Access offer you a choice of formats without compromising the most important aspect of any instrument: how well it performs musically.

Designed as the ideal companion to any DJ or project studio, this 37-key model is not only compact but also stunningly beautiful. The side panels are a mix of wood and pure aluminium, while the white LEDs add class and style. The sound engine is exactly that used in the powerful and versatile TI Desktop and Keyboard models.

Even though the Virus is truly multi-talented instrument with great range, you still instantly know it when you hear a it in a production. That's because Access really "get" synthesizer basics: outstanding oscillators, amazing filters and breathtaking effects.

Every part, even in multi-mode, comes with its own chain of independent effects (including reverb and delay). The massive voice count makes it possible to stack even complex sounds for the first time without breaking a sweat.
Read more
 1 in stock $2,327.75
Click for better price!
or call +44 20 7424 1960
quote 527756
Access Virus TI2 Desktop Synthesizer
Cat: 527748 Rel: 14 Apr 14
 
Desktop synthesiser module with all-metal enclosure with wooden front strip
Notes: This synthesizer will make any desktop proud! The TI Desktop features an all-metal enclosure with a wooden strip on the front. Loads of knobs and buttons give direct access to the most important sound shaping parameters.

This range of instant access hands-on control will delight those who don't like menu diving. Like all other Virus TI synthesizers, a stereo analogue input offers the power to process external signals through the Virus' sound engine.

An optional 19" rack mounting kit is available for purchase.

There are not many modern synthesizers which can claim to have shaped the sound of music -- from electronica to soundtrack -- as much as the Virus line of synthesizers has. The Virus is known as much for its flexibility and powerful sound as for Total Integration, our award winning way to interconnect a hardware synthesizer with your DAW.

The first Virus was released in 1997 and each new iteration has added more features more powerful hardware, and greater musical potential. That evolution explains why the Virus TI series is so sought after and why it receives such praise from owners, press, and fans all over the world.

Artists including Depeche Mode, Madonna, Linkin Park and The Prodigy tour with a Virus-based setup. Producers such as Sasha, Pete Tong, Roger Sanchez and Dr. Dre consider the Virus a core part of their studios. Composers such as Hans Zimmer, James Newton Howard, John Powell and Mark Isham are enthusiastic Virus users, utilising its signature sound for their Hollywood blockbuster soundtracks.
Read more
 2 in stock $1,768.13
Click for better price!
or call +44 20 7424 1960
quote 527748
Access Virus TI2 Polar Keyboard Synthesizer
Cat: 527752 Rel: 21 Jul 14
 
Award winning hardware synthesiser with up to 90 voices (dependent on patch)
Notes: There are not many modern synthesizers which can claim to have shaped the sound of music -- from electronica to soundtrack -- as much as the Virus line of synthesizers has. The Virus is known as much for its flexibility and powerful sound as for Total Integration, our award winning way to interconnect a hardware synthesizer with your DAW.

The first Virus was released in 1997 and each new iteration has added more features more powerful hardware, and greater musical potential. That evolution explains why the Virus TI series is so sought after and why it receives such praise from owners, press, and fans all over the world.

Artists including Depeche Mode, Madonna, Linkin Park and The Prodigy tour with a Virus-based setup. Producers such as Sasha, Pete Tong, Roger Sanchez and Dr. Dre consider the Virus a core part of their studios. Composers such as Hans Zimmer, James Newton Howard, John Powell and Mark Isham are enthusiastic Virus users, utilising its signature sound for their Hollywood blockbuster soundtracks.

The Virus TI line of synthesizers includes 4 different variations: two keyboard models and two desktop versions. The great news is that all of these instruments produce the same award-winning sound. In this way, Access offer you a choice of formats without compromising the most important aspect of any instrument: how well it performs musically.

Designed as the ideal companion to any DJ or project studio, this 37-key model is not only compact but also stunningly beautiful. The side panels are a mix of wood and pure aluminium, while the white LEDs add class and style. The sound engine is exactly that used in the powerful and versatile TI Desktop and Keyboard models.

Even though the Virus is truly multi-talented instrument with great range, you still instantly know it when you hear a it in a production. That's because Access really "get" synthesizer basics: outstanding oscillators, amazing filters and breathtaking effects.

Every part, even in multi-mode, comes with its own chain of independent effects (including reverb and delay). The massive voice count makes it possible to stack even complex sounds for the first time without breaking a sweat.
Read more
 1 in stock $2,099.11
ACL Kazu To EVE1 Connection Cable
ACL Kazu To EVE1 Connection Cable (module connection cable)
Cat: 698460 Rel: 08 Aug 18
 
Module connection cable
Notes: This cable is needed to connect the ACL KAZU PSU module to the EVE busboard. The cable is equipped with two five-pin connectors, which are compatible to KAZU and EVE-1.

Module and bus board are not included.
Read more
 1 in stock $8.34
ACL System 2 Desktop Modular Synthesiser
ACL System 2 Desktop Modular Synthesiser (desktop modular synthesiser)
Cat: 765867 Rel: 17 Jul 20
 
Desktop modular synthesiser
Notes: Beautiful complete modular system from Berlin-based Audiophile Circuits League. Based around two contrasting VCOs and a ladder filter, but with massive depth beyond the basics.

Supplier notes:
With System II Audiophile Circuits League presents a powerful modular Synthesizer with two full-featured Oscillators and an extremely musical Lowpass filter. Based on the Multifunction Discrete VCO and the Variable Sync VCO, System II serves with an unbelievably vast sound spectrum, from thick basses to aggressive Leads. The new VC Dual Amp provides a crystal clear sound, which can be perfectly integrated in the studio thanks to the high quality Audio Interface.

System II is a beautiful compact system, suitable for all situations.

System 2 is a modular instrument built entirely from ACL components. The search for a microcomputer in this system would be in vain because all modules are analog and for the most part discrete.

The whole thing comes in a metal case with oak side panels. A KAZU power supply is also included. - However, not as a module, but discreetly installed inside. This leaves four partial units for personal additions. The KAZU power supply is characterized by minimal interference and voltage peaks. The same applies to the built-in EVE 1 bus board. The result: extremely clear high-end sound.

Included modules:
Multifunction Discrete VCO
2 x Oktave
Variable Sync VCO
Discrete Core Ladder VCF
Gate Mix
2 x Multi II
Envelope X3
2 x QLFO
2 x VC Dual Amp
Audio Interface
EVZ1-Gehause 6U 84TE (incl. Kazu PSU, EVE1 Busboard, AC Adapter 15V - 3.34 A)
Read more
 1 in stock $4,223.26
Acorn FP1 Universal Foot Switch Pedal
Cat: 474676 Rel: 03 May 13
 
Universal foot switch
Notes: The Acorn Instruments FP1 universal foot switch works with any product requiring a standard TS connection foot switch. It's a tried-and-true, solid design with a 6" cable and a polarity switch.
Read more
 2 in stock $15.77
Adastra L01 Portable Megaphone (10W)
Cat: 647286 Rel: 24 Apr 17
 
Compact, portable megaphone with 10 watt output & optional siren
Notes: A compact megaphone with folding handle and wrist strap for ultimate portability. Announcements are amplified from the integral rear microphone up to 10W output with an optional siren for alerts. Easy to carry and store yet capable of delivering impressive sound projection.
Read more
MRP:$15.68 SAVE 17%
 3 in stock $13.05
Adastra MM321 Rack Mixer With Bluetooth & USB/FM Player
Cat: 655661 Rel: 29 Jun 17
 
Rack-mountable 1U mixer with built-in media player & Bluetooth receiver
Notes: 3 mono inputs connect via XLR microphone or line input (switchable). Each of these inputs has switchable +20V phantom power for use with condenser microphones or D.I. boxes and channel 1 has a variable priority function. Two stereo auxiliary line inputs are provided on RCA connectors with a stereo record output. Media player operating modes include 3.5mm Aux input, USB audio player, FM radio tuner and Bluetooth receiver for playback from a smart phone or tablet. Main left and right outputs are fed to XLR with an additional mono summed output on 6.3 jack. Versatile yet easy to use as a main mixer for background music, public address and house PA systems.
Read more
MRP:$259.99 SAVE 40%
 3 in stock $155.68
Click for better price!
or call +44 20 7424 1960
quote 655661
AKG K275 Over Ear Closed Back Foldable Studio Headphones
AKG
Cat: 647249 Rel: 20 Feb 19
 
Over-ear, closed-back, foldable studio headphones
Notes: You can't take the studio out of these headphones - perfect for critical listening applications such as studio recording or live mixing.

The AKG Foldable Studio Headphones Line is built on a legacy of 70 years of quality, and features our latest transducer and acoustic technologies. As a result, the family delivers unparalleled audio performance for musicians, engineers, and producers who need superb accuracy from reliable headphones that stand up to today's mobile lifestyle.

With large 50 mm transducers and a closed-back, over-ear design, the K275 are perfect for professional critical listening applications such as studio recording or live mixing. Just pick them up and you'll immediately find the roadworthy design takes away the worry of damage while traveling. Try them on and you'll realize they still provide the superior studio-quality sound you expect from AKG. And you'll never get tired of wearing AKG Foldable Studio Headphones because their ergonomic design provides a comfortable fit - even during long sessions.

As the gold standard of professional-quality sound with over one million studio headphones sold, AKG knows what it takes to build world-class headphones - high-quality, durable parts working together to provide amazing sound matched with optimal fit and comfort.
Read more
 1 in stock $144.00
AKG K361 BT Over Ear Closed Back Studio Headphones With Bluetooth
AKG
Cat: 761991 Rel: 18 Feb 20
 
foldable studio headphones with Bluetooth
Notes: Very nice headphones from one of our favourite brands. Comfortable closed-back, over-ear design for good isolation. Clear, accurate sound plus built-in mic and Bluetooth for on-the-go use with a phone.

Supplier's notes:
Whether you're an artist, engineer, podcaster or beat maker, you're always in creative mode. AKG K361-BT Professional Studio Headphones strike the perfect balance between studio-quality sound, Bluetooth functionality, plush comfort and a sleek, sturdy design that stands up to your mobile lifestyle.

K361-BTs are precision-engineered to reproduce natural, balanced audio in exceptional detail, so you can make more confident decisions when you're mixing and editing. They deliver the deepest bass and highest highs in their class, with a stunning frequency response of 15 Hz to 28 kHz. K361-BTs offer the convenience of switchable Bluetooth wireless and wired connectivity; a built-in microphone allows two-way Bluetooth communications. Plush, ergonomic earcups cradle your ears in supreme comfort - because once you hear how amazing your K361-BTs sound, you won't ever want to take them off.
Read more
MRP:$142.41 SAVE 24%
 3 in stock $108.87
AKG K361 Over Ear Closed Back Studio Headphones
AKG
Cat: 739904 Rel: 29 Jul 19
 
Foldable over-ear headphones featuring superior isolation & extended bass response
Notes: Whether you're an artist, engineer, podcaster or beat maker, you're always in creative mode. AKG K361 Professional Studio Headphones strike the perfect balance between studio-quality sound, plush comfort, and a sleek, sturdy design that stands up to your mobile lifestyle.

K361s are precision-engineered to reproduce natural, balanced audio in exceptional detail, so you can make more confident decisions when you're mixing and editing. They deliver deeper bass and higher highs than any other model in their class, with a stunning frequency response of 15 Hz to 28 kHz. Plush, ergonomic earcups cradle your ears in supreme comfort - because once you hear how amazing your K361s sound, you won't ever want to take them off.
Read more
 1 in stock $91.39
AKG K371 BT Over Ear Closed Back Studio Headphones With Bluetooth
AKG
Cat: 761994 Rel: 12 May 20
 
Bluetooth studio headphones
Notes: Great all-rounders from AKG, designed primarily for studio use but serving double duty as everyday headphones thanks to built-in Bluetooth streaming. Great sound and clean, stylish design.

Supplier's notes:
Whether you're an artist, engineer, podcaster, video editor or content producer, you're always in creative mode. AKG K371-BT Professional Studio Headphones strike the perfect balance between studio-quality sound, Bluetooth functionality, plush comfort and a sleek, sturdy design that stands up to your mobile lifestyle.

K371-BTs are precision-engineered to match AKG's Reference Response acoustic target to reproduce natural, balanced audio in extraordinary detail, so you can make more confident decisions when you're mixing and editing. They deliver deeper bass and higher highs than any other model in their class, with a stunning frequency response of 5 Hz to 40 kHz. K371-BTs offer the convenience of switchable Bluetooth wireless and wired connectivity; a built-in microphone allows two-way Bluetooth communications. Plush, ergonomic earcups cradle your ears in supreme comfortibecause once you hear how amazing your K371-BTs sound, you won't ever want to take them off.
Read more
 1 in stock $158.95
Allen & Heath ZED10 Mixer
Cat: 431966 Rel: 17 May 12
 
Multipurpose studio mixer for live sound & recording
Notes: The Allen & Heath ZED-10 mixer is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio input/output making it easy to capture stereo recordings.

Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards.

Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. The ZED-10 is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED-10 is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED-10, select the USB routing on the mixer and the device on your computer and that's it. CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations.

SEND OPTIONS
1) Main Mix Left + Right (Post master Level)
2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)
3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS
1) To Playback input (through jack socket break contacts)
2) To Stereo 2 channel (through jack socket break contacts)

ZED-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-10's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character
Read more
 1 in stock $216.66
Click for better price!
or call +44 20 7424 1960
quote 431966
Allen & Heath ZED10FX Mixer
Cat: 431968 Rel: 17 May 12
 
Multipurpose studio mixer with FX
Notes: Ten-channel version of one of the most cost-effective mixers on the market. Great sound, good EQ and handy built-in effects. Check out the 12-channel version if you prefer faders for level control.

Supplier's notes:
The Allen & Heath ZED-10FX mixer is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio in/out making it easy to capture stereo recordings.

Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards. Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. We've added a set of fabulous effects to give shimmering reverbs and enhance your sound.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS:
1) Main Mix Left + Right (Post master Level)

2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)

3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS:
1) To Playback input (through jack socket break contacts)

2) To Stereo 2 channel (through jack socket break contacts)

ZED-10FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-10FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

ZED-10FX's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character.

The ZED-10FX is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects.


Read more
 1 in stock $260.59
Click for better price!
or call +44 20 7424 1960
quote 431968
Allen & Heath ZED12FX Mixer
Cat: 431967 Rel: 17 May 12
 
Multipurpose studio mixer with FX
Notes: The ZED-12FX is ideal for groups who need to travel light. Even with its small footprint, the 12FX squeezes in 4 auxiliary channels and swept semi-parametric EQ on top of the already impressive feature set including configurable USB audio in/out makes it easy to capture stereo recordings.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED-12FX is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

MUSIQ
ZED-12FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-12FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

Based on the proven pre-amps from the hugely successful PA series, ZED-12FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a
higher input impedance.
Read more
 1 in stock $424.60
Click for better price!
or call +44 20 7424 1960
quote 431967
Allen & Heath ZED12FX Mixer (B-STOCK)
Cat: 764072 Rel: 17 May 12
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The ZED-12FX is ideal for groups who need to travel light. Even with its small footprint, the 12FX squeezes in 4 auxiliary channels and swept semi-parametric EQ on top of the already impressive feature set including configurable USB audio in/out makes it easy to capture stereo recordings.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED-12FX is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

MUSIQ
ZED-12FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-12FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

Based on the proven pre-amps from the hugely successful PA series, ZED-12FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a
higher input impedance.
Read more
 1 in stock $397.28
Allen & Heath ZED16FX USB Mixer For Live Sound & Recording
Cat: 482506 Rel: 03 Apr 13
 
Multipurpose USB mixer with 10 mono mic/line inputs
Notes: One of our favourite small live/studio mixers, shown here in 16-channel form with built-in digital effects. Clean sound, decent three-band semi-parametric EQ and built-in audio interface. Very impressive.

Supplier notes:
The ZED-16FX is ideal for groups who need to travel light. It gives musicians, venues and hire companies access to 10 full mono channels, 3 stereo channels and a high quality effects unit in a compact, rack mountable format. Configurable USB audio in/out makes it easy to capture stereo recordings.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on the ZED is super-flexible and super-easy: No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your Zed, select the USB routing on the mixer and the device on your computer and that's it. CD quality audio to and from your PC or Mac.

The ZED-16FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ, with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, the ZED-16FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge, 69dB of range to be exact, and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

The ZED-16FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Allen & Heath's DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point, this quality and integration is only available from the ZED-FX. The ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing, in fact, it's just as easy as using effects pedals. To alter effects parameters, the Tap button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on Plate Reverb, or the depth on Chorus.

Based on the proven pre-amps from the hugely successful PA series, ZED-16FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.
Read more
 1 in stock $506.44
Click for better price!
or call +44 20 7424 1960
quote 482506
Allen & Heath ZED16FX USB Mixer For Live Sound & Recording (B-STOCK)
Cat: 775919 Rel: 03 Apr 13
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


One of our favourite small live/studio mixers, shown here in 16-channel form with built-in digital effects. Clean sound, decent three-band semi-parametric EQ and built-in audio interface. Very impressive.

Supplier notes:
The ZED-16FX is ideal for groups who need to travel light. It gives musicians, venues and hire companies access to 10 full mono channels, 3 stereo channels and a high quality effects unit in a compact, rack mountable format. Configurable USB audio in/out makes it easy to capture stereo recordings.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on the ZED is super-flexible and super-easy: No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your Zed, select the USB routing on the mixer and the device on your computer and that's it. CD quality audio to and from your PC or Mac.

The ZED-16FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ, with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, the ZED-16FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge, 69dB of range to be exact, and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

The ZED-16FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Allen & Heath's DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point, this quality and integration is only available from the ZED-FX. The ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing, in fact, it's just as easy as using effects pedals. To alter effects parameters, the Tap button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on Plate Reverb, or the depth on Chorus.

Based on the proven pre-amps from the hugely successful PA series, ZED-16FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.
Read more
 1 in stock $470.04
150/2,273(ページ1/46)の商品
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z すべて
1  2  3  ...  46  »

Filter

Back Catalogue: Studio Equipment
Release Date
Close