Back catalogue: Studio Equipment

Notes: The Moon Op Amp Fuzz is a supermassive destroyer, spinning galaxies of gain. Tidal wave bass response gives you tones heavy as gravity itself.

The filter control offers an expanded range of usable tones and the filter switch gives you three distinct EQ phases: Scooped Mids 'classic', Flat EQ, or Full Range.

Feed the Moon Op Amp Fuzz with your favourite drive pedals and unlock worlds of complex tones.

The Moon's massive sound is achieved with a quad op amp delivering four stages of gain and fuzz. This circuit has its roots in Keeley's popular Dark Side pedal. In that design the tone and gain of the pedal were both tailored to be a vintage sounding fuzz for lead work. Keeley wanted to go 180 degrees in the other direction with this pedal's tone, the purpose being to achieve infinite sounding dreamy deep fuzz.

This is a punishingly heavy op amp fuzz designed to extend your guitar or bass frequencies as low as possible. This also means that your lead tones are as harmonically as rich as possible. So thick is the fuzz that your notes will rise and peak into brilliant feedback.

Keeley's most lunar sounding pedal: Moon Op Amp Fuzz.

Notes: The MUSE DRIVER - Andy Timmons Full Range Overdrive is an overdrive workstation that allows you to orchestrate everything from a clean boost to a treble supercharger, a chimey tube-amp overdrive to a square-wave, germanium fuzz generator and more.

This Pedal combines a three-control blues driver circuit with two switches for the voicing of Drive and Tone characteristics. Robert and Andy developed these switches to give players a broad range of drive tones. The Drive toggle engages two germanium diodes for a smoother, slightly compressed drive. Switch to Andy's clipping style for a brighter and more articulate attack.

Every part of the circuit has been optimized for tone and the demanding needs of a recording and touring artist such as Andy Timmons. Simply adding the MUSE DRIVER to your pedalboard will make your rig sound better. This professional grade overdrive can be switched between true-bypass and buffered bypass at any time.

Andy Timmons - Tone Switch

This drive pedal gives you two tone control circuits to choose from. When the Tone Switch is up and in the AT Position the tone control features Andy's preferred voicing and low-end response. Each note in a chord is clear and articulate. If the Tone Switch is down and in the RK Position that features the legendary Phat Boost providing more low-end frequency response, perfect for pushing up vintage or single coil pickups.

Full Range Overdrive - Germanium Toggle Switch

The MUSE DRIVER combines JFET saturation, diode clipping, and op-amp clipping in order to create its harmonically rich tone. Drive Switch UP for AT Clipping - this mode features asymmetrical LED and silicon diode clipping and is Andy's Super AT Mod sound. Drive Switch Down for RK Clipping - now the circuit features two germanium diodes for clipping. This mode can sound a bit like a vintage fuzz pedal with a softer, smoother feel.

Muse Driver - Buffered Bypass or True Bypass

The pedal features our industry leading buffer for noise-free switching. Keeley Electronics have developed a buffer which not only makes your rig sound better, it gives you silent switching with no tone loss. Switch between true-bypass and buffered on the fly. Simply press and hold the foot switch for two seconds and the pedal will switch between true-bypass and buffered bypass! You decide what works best in your rig.

Made In The USA

Keeley Electronics design, engineer, and manufacture the Keeley Electronics/Andy Timmons MUSE DRIVER in Oklahoma City. Everything about the MUSE DRIVER is geared towards the professional musician and their quest for an inspiring tone when performance demands it. From the meticulously built circuit boards to the newly fabricated aluminium enclosure; we make guitar effect pedals like finely crafted musical instruments.

Notes: A clever pedal design based on classics. Mix and match tone and distortion circuits from legendary Nobels ODR-1 Natural Overdrive and Ibanez Tube Screamer. Versatile stuff.

Supplier's notes:
Imagine the ability to combine the best and defining characteristics of different overdrive & boost pedals in order to create hybrid sounds no one has ever played through before. That is exactly what Keeley have engineered with the Noble Screamer.

It's a 4-in-1 pedal that gives you two very familiar drive circuits and two brand new amp-like overdrive and distortion tones. It's almost like pedal-modelling, except these are 100% analogue circuits, and you decide which tone-control or clipping-section you want to play through.

Toggle between battle-tested, classic overdrive effects or innovate your sound using new hybrid tones; let your ears be the judge. Even with all of these features, the pedal remains a user-friendly three knob overdrive. The innovation in the Noble Screamer doesn't end there; this new design features true-bypass or buffered, truly silent switching, on the fly. The Keeley Noble Screamer Overdrive and Boost is entirely manufactured at Keeley Electronics and is the first release in a new aluminium enclosure.

The Noble Screamer gives you two tone control circuits to choose from - a Broad Spectrum Tone Control or Narrow Focus Filter Control.

When the Tone Switch is up and in the OD Position you will hear a 'Spectrum' type of tone control that has the ability to go from a flat EQ to an EQ that has a boost in the treble and bass response. If it is in the TS Position you have a Low Pass Filter that rolls off the high frequencies only.

Diode Clipping

Also the pedal offers both styles of diode clipping - Hard and Soft Clipping: If the Clipping Switch is in the OD Position it features Hard Diode Clipping which is an edgier, more aggressive tone. When in the TS Position that uses Soft Diode Clipping, like a tube amplifier softly overdriven.

Buffered and True Bypass

The Keeley Noble Screamer features Keeley's Vitamin K Infused Buffer for noise free switching. Keeley have developed an amazing sounding buffer which not only makes your rig sound better, it gives you silent switching with no tone loss.

No more pops and clicks to distract from your music. If you want to turn that feature off and go back to true bypass, simply press and hold down the foot switch for two seconds and the pedal will switch to True-Bypass. This is great for players that want the effect of plugging directly into their amp when the pedal is off.

Alternatively, players that want a strong and clear signal even when the Noble Screamer is turned off, simply hold the stomp switch down for two seconds and the effect is back to Buffered Bypass. Enjoy truly silent switching and let your music be the only voice.

Made In The USA

Keeley design, engineer, and manufacture the Noble Screamer in Oklahoma City. Everything about the Noble Screamer is geared towards the professional musician and their quest for an inspiring tone when the performance demands it. From the inside of the pedal and its meticulously built circuit boards and metal construction audio jacks to the outside of the effect its newly fabricated aluminium enclosure; Keeley make guitar effect pedals to be finely crafted musical instruments.

Notes: 4-in-1 RAT and SD-1 Style Overdrive and Distortion

Keeley put two very different overdrive & distortion pedals in one box and gave you two new sounds in the process. The Keeley Electronics Super Rodent is a 4-in-1 pedal that gives you two well-known distortion circuits and two brand new sounds by way of the toggle switches! It's almost like pedal modelling, except these are 100% analogue circuits and you decide which tone-control or clipping-section you want to play through.

You can play through the classic yellow 'Japanese Super O-Drive' or a 'Rodentia Michigander' distortion circuit, or even better, you can Frankenstein new monster tones with the two hybrid modes.

The creative design keeps the pedal a simple and space-saving three-knob distortion pedal with an amazing tone. It only takes two seconds to make the Super Rodent either buffered-bypass or true bypass, whatever works best on your pedalboard. The Keeley Super Rodent Overdrive and Distortion is entirely designed and manufactured by Keeley Electronics in a new aluminium enclosure.

Tone Control

The Super Rodent gives you two tone control circuits to choose from. When the Tone Switch is down and in the RT Position the tone control simply rolls off high-frequencies. If the Tone Switch is up and in the SD Position you have an active low pass filter and more bass and treble frequencies are available.

Diode Clipping

Hard or Soft Clipping: The Super Rodent gives you both styles of diode clipping. Diodes are used to create hard clipping distortions or smooth overdrive sounds. If the Clipping Switch is in the RT Position it features Hard Diode Clipping which is an edgier, more aggressive tone. When the Clipping Switch is in the SD Position that uses Soft Diode Clipping, like a softly overdriven tube amplifier.

Buffered and True Bypass

The Keeley Super Rodent features our Jfet buffer for noise free switching. Keeley have developed an amazing sounding buffer which not only makes your rig sound better, it gives you silent switching with no tone loss.
No more pops and clicks to distract from your music. If you prefer true bypass, simply press and hold down the foot switch for two seconds and the LED will flash twice to indicate success. True Bypass is great for players that want the effect of plugging directly into their amp when the pedal is off.

Alternatively, players that want a strong and clear signal whether the Super Rodent is on or off, simply hold the stomp switch down for two seconds and the effect is back to Buffered Bypass (LED flashes three times). Enjoy truly silent switching and let your music be the only voice.

Made In The USA

Keeley have designed, engineered, and manufactured the Super Rodent in Oklahoma City. Everything about the Super Rodent is geared towards the professional musician and their quest for an inspiring tone when the performance demands it. From the inside of the pedal and its meticulously built circuit boards and metal construction audio jacks to the outside of the effect its newly fabricated aluminium enclosure; Keeley make guitar effect pedals to be finely crafted musical instruments.

Notes: Welcome to a new era of the most iconic fuzz/distortion sound the world has ever known. You know, that epically huge and super saturated tone (some might call it big and muffy) that has defined the signature sound of so many artists and countless records in the past few decades. It's arguably one of the pedals with the biggest impact on the entire industry, which has seen it modified over and over and over again. So much that you think it's all been done, right? Well, KMA Machines have a surprise for you right here!

Holding three different Gain Modes, a pre- or post-EQ Clean Blend, active Bass and Treble controls, a foot-switchable and expression-controllable parametric Mid-EQ as well as a switchable top-boost for even more raspy, grinding bite, CHIEF DISRUPTOR is the most flexible, beautifully balanced and LOUDEST muff-style pedal you'll ever hear!

Over the years, different muff drives had different levels of gain, so KMA Machines derived three major distinctive gain structures all based on what was thought to be the best versions. The Vintage Mode (VTG) will give you every shade of discrete overdrive, while the Tight Mode will give a more focused and modern tone with less bass and super crisp harmonics. Heavy Mode is the essence of what we all love about muffs. Heavy, sustaining and crazy thick fuzzy distortion, with bone-shaking lows and chewy mids. Just crank the Disruption (Gain) Control and you'll see this in action.

Tonal shaping was one of the true weak points of classic muff pedals, and this has been remedied with the Chief Distruptor. KMA Machines opened the gates to more modern tonal flexibility through the active Bass and Treble controls, which let you boost or cut highs and lows with up to 15 dB, while the parametric Mid-EQ with adjustable centre-frequency and level boost/cut allows you to fine tune the mids with extreme precision, for everything from classic scooped fuzz tones, modern mid-focused dirt tones and all the way to cocked-wah saturation.

You can take complete hands-free control of the Mid-EQ frequency via an expression-pedal. This lets you make instant tone changes on the fly, as well as unleash fast and quacky wah-like sounds or slow and enveloping phaser-like sweeps. If you feel like the filter needs to be more resonant for screaming synth-like sweeps or needs to be subtler, then you can adjust the Q of the Mid-EQ via an internal trimpot. The mids can also be turned on and off via the relay-based soft-switch, allowing you to kick in the mids for soaring solos, cutting chords or when you want to get filter freaky. Having super saturated mids and lows can sometimes result in a perceived loss of highs. To fix this, just engage the Top-Boost to give your high-mids a big push for more crunchy harmonics and bite to cut through any band mix. The Top Boost has been tweaked, but if you feel like it's either too loud or not loud enough, you can also adjust the Top Boost Level via an internal trimpot.

The gain control has been carefully balanced to achieve total control of even the slightest harmonic nuances. So, whether you're looking for low gain drive, crunchy medium gain rhythm tones, singing or saturated lead sounds or skull-crushing doom tones, the Disruption control can and will cover all of them! A lot of gain rules! But gain also means compression, and the more you compress your sound, the more your instrument will lose definition. To preserve your precious core tone the CHIEF DISRUPTOR sports a clean blend control and a toggle switch to define the insert position. Insert your dry signal before the EQ section for a more cohesive sound or place it post-EQ to keep your dry signal completely unaffected.

Last but not least, KMA Machines have implemented stacked headroom topology to keep the EQs from getting saggy when cranked, all which results in the tightest, most punchy and LOUDEST muff-style tone on the market. Go forth and empower your creative side, with tone that has true vision to inspire. If you are ready for a change in distortion history, then it's time to follow the CHIEF DISRUPTOR!

Notes: Floating above your head, delicate and elusive yet dreamy and sweeping. Always in motion until it dissolves and merges with the all immersive atmosphere around it. Just close your eyes and let the KMA Audio Machines' Cirrus Delay and Reverb carry you across the open sky, onto its sonic cloudscapes.

Cirrus is KMA Audio Machines' first step into the fully digital realm. But KMA have come up with a special and versatile, dynamically modulated combined Delay and Reverb pedal that will forever change your perception of time and space.

Made up of a Delay side and a Reverb side, both sides of Cirrus sport the most important basic controls such as Time (up to 1.5 sec). Repeats for the Delay and Decay and Damp for the Reverb. Plus, each side has its own mix control as well. So far so good, but now it's time to jump down the sonic wormhole!

This little Spatial-Temporal Modifier gives you three different Delay AND Reverb modes, which all sport a special dynamic feature that is controlled by your picking attack. This enables you to create sounds that are certifiably out of this world! To set the sensitivity of how the sound reacts, every section has its own sensitivity control.

The different Delay and Reverb modes cover vastly different modulated areas.

Modulated Delay Mode (MOD) fluctuates the Delay signal for a dynamic dancing tape echo-inspired modulation that'll deliver everything from subtle sways, to crazy pitch-bends. The Sample & Hold Mode (S/H) adds a sequencer-like filter in front of the Delay line, perfect for synthy textures. Play softly for subtle filter action or hit it hard for more pronounced electro-vibes. The third Delay Mode (OCT) blends in a high octave as your notes decay for unique shimmery dimensions, shining through like tiny stars in the cloudy night sky.

Over to the Reverb section, Modulated Reverb Mode (MOD) will decorate your trails with silky smooth movement, whereas the two other Modes deliver either an opening Low-pass Filter (LP) or a closing High-pass Filter (HP). The harder you pick the more the Low-pass will open up and bring in those shimmering highs, as if you're opening and closing portals to far away galaxies simply through your playing. Contrary to that, the closing High-pass will cut your lower frequencies when picking harder which will create cool lo-f textures. However, the ambient party doesn't stop here!

A big part of creating a signature sound comes from your pedal order and we know that a lot of you like to get creative there. Well, the Cirrus obliges! Set the Order Toggle to "Reverb" to run the Delay into the Reverb or flip it to "Delay" to switch it the other way - either direction will give you worlds of inspired soundscapes. You even get another Toggle Switch to set the Delay Tap subdivision, so you can get the right rhythms rolling fast. Toggles are awesome!

Now, on to the footswitches - Tap-Tempo on the left (neat!) and the much-needed Bypass Switch on the right (classic!). But wait, we actually made these stompers cool - the humble Bypass and Tap-Tempo Switches are suddenly full of additional creative secrets!

Besides the standard latching mode, the Bypass Switch offers some cool, yet creative and simple to use options. When the pedal is off, you can engage the pedal momentarily by holding the Switch down for sudden bursts of ambience. When the pedal is on though, holding down the Switch maxes out the Decay, jumping you straight into infinite reverb wonderland. You can also hold down the Tap-Tempo Switch to max out the repeats for infinite echoes. Plus, you can even hold down BOTH at the same time to enter an endless cascading dream state!

The Cirrus has been equipped with an Expression Pedal input (standard TRS connection) and a Selector Switch, giving you complete hands-free control over whatever key parameter of Cirrus you want. In addition, an internal switch can turn the Reverb and Delay trails on or off to taste, plus the individual Reverb and Delay mix controls help to tailor your sound exactly as you see ft.

As the final piece of the tonal puzzle, a Serial FX-Loop was added, letting you put any pedal in front of the Delay/Reverb line, to further flavour your own signature sound.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 220mA current draw)

Every pedal is designed, assembled, silkscreened, tested and numbered by hand in our small workshop. We use external manufactured PCBs to guarantee our high quality standard and keep the price of our pedals reasonable. The use of an indestructible powdercoated die-cast enclosure ensures a maximum durability.

Notes: Fuzzly Bear 2 - Unleash the Beast, again

"Through the untamed wilderness of the forest strives a grizzly monster, its glistening eyes peeking through the undergrowth. Endowed with razor sharp claws and bone-crushing teeth, this beast will rip through any intruder that dares to trespass into its domain. A thundering, sizzling roar distortedly echoes through the woodland. It's here! It's time to face the Fuzzly Bear!"

In 2013, KMA Machines' first ever production pedal was inspired by an old, obscure and highly underrated fuzz box from the 1970s - the Jordan Bosstone. The original Bosstone wasn't even a pedal, it was a device you plugged directly into your guitar, which brought a host of problems. Hence, KMA Machines greatly refined the circuit for the original Fuzzly Bear, to get the essence of that old-school sound, but giving it some modern twists by sorting out the low end and adding a Bias control, to help players explore lots of new tonal capabilities of this long-forgotten box of dirty tricks.

With Fuzzly Bear 2, KMA Machines put this now classic re-imagined fuzz into a modern, more pedal board friendly enclosure with top mounted jacks, enhanced it with relay-based silent switching and improved electronics.

Back in the day, the main reason why the Jordan Boss Tone did not conquer the world of effects was actually due to its massive lack of bass. However, its core fuzz sounds could be truly heavenly with tones ranging from a purring overdrive, to downright vile and aggressive fuzz assaults. But when you awoke it, dug in and found 'that' tone, boy was it good and not at all harsh and gritty, like so many other fuzz designs at the time could be.

When designing and modifying the circuit, all the fuzzy goodness was kepy, but KMA Machines brought back the essential low end and gave some more tonal control, all to make this new take take fit more modern styles without compromising the core sound and simplicity.

The GAIN knob delivers a whole range of different fuzz shapes. Back it off to get a dirty chunky overdriven tone, turn it up to give the FUZZLY BEAR 2 a thick and thicker coat of fur. Set the gain fully clockwise and magic will happen! The pedal's smooth, warm and cosy decay turns into a starved and gated fuzz sound that almost gives a ghost octave, pseudo trumpety kinda vibe - perfect for classic tunes of yesteryear.

Fuzzly Bear 2 SKIN/MEAT control adjusts the bias of the circuit. Think of it as the claws of the beast. You can dial in a sharp drive tone that only brazes the skin, a thick and meaty wall of fuzzy fur that can rip right through the intruder's flesh and anything in between.

Don't confuse this pedal with a cute brown bear cub - this is the Fuzzly Bear 2 and it will maul your face off!

Notes: The ultimate metal tone? An evolution of the brand's excellent Wurm distortion with the addition of an ultra-fast VCA-based noise gate, ideal for HM-2-inspired chainsaw tones. Heavy.

Supplier's Notes:
Fusing together the powerful evolution of KMA's highly regarded Wurm Distortion with an intuitive, yet versatile and ultra-fast Noise Gate, Guardian of the Wurm is the perfect metal monster. From chugging hard-rock, droning doom metal and grinding Swedish death metal, the beast abides. But through its highly tweakable control set, the pedal can be tamed to provide impeccable clarity to your riffs, making this the definitive dirt pedal for metal, prog-rock, shoegaze, indie and beyond.

Power by opt. 9 V PSU (9 V DC, centre -, 2.1 mm, >150 mA max. current draw)

Notes: Amazingly versatile phaser business in this brilliantly designed pedal. Watch the demo video to hear the amazing range of sounds this one can do. Best phaser ever? Might just be.

Supplier's Notes:

Jump into spaceship Horizont and begin your trek into star- filled galaxies, all while discovering the incredible vastness of the sounds created by this inter-dimensional multi-spatial stereo analog JFET Phaser. The unexpected is waiting for you behind the far away horizon and it will be a journey you'll never forget!

The Horizont's mission is to push way beyond the classic phasing sounds of yesteryear, and take you to uncharted phaser worlds the second you plug in. By combining lush analog JFET phasing with digitally controlled dynamics, Horizont creates a vivid and expressive modulation experience, all while providing experimental and creative features that'll kick phasing well into the 21st century.

Besides the more common phaser controls, the Horizont offers a plethora of new and exciting options for all the interstellar tone chasers out there. To greatly broaden the range of phasing tones available, KMA implemented a digital LFO with no less than eight different waveforms: Ramp Up/Down, Sine/Triangle/Square wave, a sweeping waveform, Sample & Hold and a random slope waveform going from 20s down to 40ms.

The implemented envelope generator is one of Horizont's absolute key features. It transforms your input signal into a control source to modulate the speed of the digitally controlled LFO or lets you manually phase for a resonant touch wah- like sound, depending on the state of the SWP- and SPURTCONTROL-Switch.

Set the SPURTCONTROL switch to LFO to let the SPURT knob adjust the internal phasing speed. However, by flicking the switch to ENV (Envelope) mode, it allows you to dynamically modulate the speed along the full LFO speed range, based on how loud the input source is (e.g. when you attack the strings hard). You can also combine the SPURT knob and the envelope by flicking the toggle to LFO+ENV where SPURT then sets the minimum speed. For even more control, you can even plug in an external expression pedal/CV-source (0-5V) to alter the minimum speed on-the-fly or you can use the TAP TEMPO switch (tap just twice) to set the speed to fit in with the tempo of your music.

The EXP-Mode switch also lets you choose between a manual phasing mode, controlled by an expression-pedal or an external CV source. Setting the EXP-Mode switch to the middle position will disable any external expression control.
The SWP (Sweep) switch lets you decide to use either the LFO or the envelope of your instrument signal to control the phasing.

The envelope can be set to upwards or downwards operation via the ENV switch, seeing the LFO either slowing down or speeding up, or flipping the orientation when phasing manually from lows to highs and vice versa. In conjunction with the FUEL (Sensitivity) and the DECAY controls, the envelope can be tailored perfectly to your needs.

The EMPH (Emphasis) mode from the original Astrospurt Phaser was kept, but have reworked and refined it extensively for the Horizont. The four toggle-switches determine the stage in which the phase-shifted signal is fed back into itself, while the REG (Regeneration) control sets the feedback amount. We also smoothed out the overall sound of the EMPH mode for a more pronounced, and crisp vocal-like tone. Each of the different switch variations and turn of the REG control will yield different results, seeing you discover new wild, fuzzy and noisy galaxies as you travel deeper down this sonic wormhole.

In order for you to levitate through spacetime, a stereo output has been added to the Horizont. You can switch between a standard stereo output or a panning output, via the STEREOPAN switch. Synchronized with the LFO speed, the upper cycle of the LFO sends the signal to the OUT1 and the bottom cycle to the OUT2. This is without a shadow of a doubt the most liquid and astonishing phasing experience you'll ever embark upon. But wait, there's more! Stop and take a deep breath, set the MIX control to fully clean and the Horizont is transformed into a Tremolo on-the-spot, with all the other aforementioned features.

Last but by no means least, the Horizont was equipped with an FX-Loop right in front of the phase-shifting line. This enables you to add your own secret sonic weapons to this spaceship, seeing you create your very own unique phasing sounds.The pedals' headroom was also increased drastically by boosting the internal circuit voltage to 18V, from the regular 9V input, to give the cleanest phasing possible no matter what instrument or line source you use.

Notes: From the outset, KMA Machine's goal was to create the most flexible analogue upper octave pedal ever yet produced. Based on a highly refined and improved version of the Shriek circuit from KMA's venerated MOAI MAEA pedal, the MANDRAKE brings an even more robust and present upper octave to the sonic table. By combining that upper-octave might with a versatile, yet highly intuitive user interface, the pedal provides a ton of killer tonal options in a very modern and pedalboard-friendly package.

"The humanesque abomination, begat of the evils that once fertilised his empire of dirt, now senses the bleak emptiness of the air that surrounds him. In recognition of his harvest and the perpetual change to his existence, his mesmerising scream is both devastating and euphoric, so all those that encircle him are subdued from the aural toxicity that emanates from the disfigured effigy."

Octave up pedals (as used by so many legendary performers including Hendrix, Tony Iommi, Josh Homme, Billy Corgan, Jack White and so many more), can really give added bite to your sound. But often, many of these fun tools can be untamed and lead to nasty clashing overtones.

With MANDRAKE however, KMA didn't want to just make a one trick pony octave up device. The powerful and ultra-fast tracking Shriek circuit was expanded on with its edgy and fuzzy character that's reminiscent of many of the best vintage octave-up devices. To do this, a 2nd order Low-Pass Filter was introduced, a TIMBRE and individual Mix controls to KMA's well-regarded circuit to make it way more versatile in a single pedal. Let's look at those cool new things in more detail.

The FILTER control helps to tame your upper harmonics, as well as to improve tracking, letting you achieve unhinged, cutting and shrieking mayhem when the control is fully turned all the way to the left. While turning the knob in the other direction gives a more mellow and blooming synth-like texture. The FILTER section is also very useful for tailoring the upper octave effect to different instruments and pickups, where getting the right tone is not a "one size fits all" equation.

In addition, to enable the octave voicing in MANDRAKE to be sculpted exactly to your own personal taste, the TIMBRE control defines the amount of fuzzy gain present in the upper octave. This allows you to perfectly blend in the pedal's tonality with the rest of your signal chain. Turning the control fully counterclockwise, gives a slightly crunchy and percussive tone that's ideal for melodic arpeggio enhancements. While cranking the TIMBRE knob fully clockwise will transform MANDRAKE into a crushingly saturated doom-hammer, instantly ready to wreak havoc with each power chord you throw at it!

Topping off the features, the DRY and OCT+ controls allow the dry signal and effected upper octave to be mixed independently, for precise tonal balancing. This is especially handy when using MANDRAKE together with other dirt pedals or when you just want to retain the natural body and attack of your instrument.

Subtle descant or decimating octaval Armageddon? With MANDRAKE the choice is totally yours!

Notes: When you add drive, dirt or other sound manipulation devices to your signal, the trade-off is always noise. So, many players turn to noise gates to help tame these unwanted nasties. Unlike many noise gates on the market, the PYLON ATB Noise Gate seeks to not only drive back the hordes of fizz and hum, but also arms and reinforces your tonal attack, shutting down the noise and yet helping you enjoy your rig's true potential.

This advanced, multi-functional and super-versatile pedal not only features an ultra-fast Gate with a smooth trigger, an integrated Boost section, an External Trigger Input for external bypass switching or Gate-triggering, a relay-based Channel Switcher for your amp but also sports a built-in Audio Transformer to help enhance and balance your rig. Hear and feel the quiet in the eye of the storm!

"Deep within the solitude of the temple, the Sau's of the Per-Ankh assembled in silence. Their conclusion was self-evident. Only those pure of tone could be received in the temple and find sonic peace. From the centre of their silent circle, the Orb swelled and raised above the Pylons. Erupting in a rain of light and spewing forth daggers of lightning, their new God subdued and separated the chaotic ocean of noise from the perfect breeze of stillness. Peace reigned once more, the hordes of cacophony overcome."

When talking about signal gain, we all know drive circuits at full tilt can be noisy malice monsters. To help get a grip on your noise floor, PYLON's NOISE GATE is based on a high-performance Blackmerr VCA and provides lightning-fast and precise performance. To find the right spot, simply choose between one of the two detection-range settings and dial in the THRESHOLD to taste. With either softly decaying notes using HIGH mode or a fast-closing response in LOW mode, you're sure to be able to dial in super tight tones when you need it, but without interfering with your sonic signature. Fast palm-mutes? No problem. Decaying notes? Dead simple to accomplish and just so you know when it is operating, the white status LED will also turn blue as soon as the gate starts to act.

Providing up to 30 dB of gain, the integrated BOOST circuit can really help to fine tune your tone, but it can also serve as an attenuator too. Its CUT control will tighten up your low end and is selectable between 65-730 Hz to ensure a mid-focussed and cutting lead sound when pushing your amp's preamp into saturation. Choosing between three different modes for the boost's on/off state, gives you plenty of options on how you want to use it. Either leave it ON to always help shape your tone, OFF if you don't need it, or use SYNC mode so it is activated with the GATE. Both CUT & BOOST knobs are backlit, in order to show you the on/off status of the BOOST section at a glance.

Using transformers in pro-audio gear is nothing new, but while they help to easily match the impedance of low-level and unbalanced signals such as from guitar or bass instruments, PYLON's audio-grade-transformer also gives additional warmth with associated nice low-frequency harmonics. Your guitars, synths or in fact anything you put through the pedal will never have sounded so solid. The pedal gives more 'heft' and enhances the core tone, in a much finer way and without any of the phase issues that can happen when using EQ alone!

However, when the output transformer is boosted even further in level, it can overload many amplifier or pre-amp inputs and make things appear muddy, especially with high levels of additional gain. So, to help tame superfluous low end (especially for rhythm chugging and soloing), KMA Machines added a fixed built-in roll off that affects everything below 65 Hz when the internal BOOST section is activated.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, >160mA current draw)

Notes: Queequeg 2

Sub Generator

Reawaken The Depths Below

KMA Machines released the original Queequeg in 2016. The pedal was our take on how simple and effective an analogue monophonic suboctave device could be.

Time doesn't stand still and so with Queequeg 2, KMA's aim was not only to update the device with a more striking appearance, but also add an additional sub-octave and the ability to switch and mix between them. With a small footprint, the updated pedal also has top mounted jacks and relay based soft switching for the modern age. Queequeg 2's super, easy-to-use and ultra-fast tracking sub-octaver works equally well on guitar, bass and synth, so these classic earth-shakingly awesome tones can find their way to any setup out there.

"Releasing the harpoon from his grasp, Queequeg gazed into the depths of the bleak waters that stretched down endlessly beneath him. Mindful to the aim of his adversary, the giant whale plunged further and further into the darkness of the abyss. This subaqueous dominion would forever be his rightful place. Queequeg 2- look deep down and believe."

Thickening up your tone slightly, blasting out faux bass-synth resonances or even filling in for a missing bass sound are just some of Queequeg 2's specialties. The pedal's super quick tracking benefits from KMA's custom all-analogue circuit design, giving you very organic and smooth suboctave tones.

Dead simple to operate, this tonally deep submergence vehicle offers three sub-octave settings to choose from. These allow you to turn your guitar into a filthy bass guitar with ground shaking lows, alternatively adding extra depth to basses and mono synths alike. The toggle switch lets you select between either the first octave (-I), the second (-II) or mix both together (-I/-II) which gives you a thunderously massive wall of sound, it even changes colour depending on the mode.

With its one knob MIX control, you are able to dial in just the right blend of the generated octaves and your clean signal. From completely clean on the left, to 100% suboctave action on the right and all with different sonic blends in between, you're sure to find your mighty vessel of tone.

Beware - don't let your lows be dragged under! Queequeg 2 draws the line right here and ends your hunt for an easy-to-set and great-sounding all-analogue and thundering sub-sonic beast!

Notes: Next-level version of KMA's excellent Tyler frequency splitter pedal. Variable 12dB/oct high- and low-pass filters, isolated effect loop sends, wet/dry mix control and relay-based soft switching.

Supplier's Notes:
Expanding on the already rich feature-set of KMA Machines' popular Tyler pedal, the upgraded Tyler Deluxe is the ultimate Swiss Army Knife for creative musicians to use on their pedalboards, live or in the studio. Ideal for Bass, Guitar or any other amplified instrument, it offers a host of new features and functions and is perfect for developing new sounds with an existing collection of pedals or splitting signals into multiple amplifiers/differing signal chains. All of this helping to lead musicians' creativity down new inspiring parallel paths.

Do you remember the sounds coming from the woods, as a rough and towering man was wielding his frequency-splitting axe? Driven by nature's most primordial force, that man then dropped his simple axe, picked up his power saw and evolved into something more. Something bigger, stronger and more versatile. Standing tall is Tyler Deluxe - the ultimate frequency-selective signal-splitting tool, ideal for developing new sounds and leading your creativity down new inspiring parallel paths.

KMA Machines' Tyler (active and variable two channel crossover/signal splitter) has successfully found its place on many bass and guitar players' boards around the world, helping them refine and define their tone. However never to stand still, the team at KMA Machines decided to step up the game and create a more advanced, versatile and flexible solution, based on the great feedback from users.

The heart of the pedal is still the same essential filter sections, which splits your signal into different loops with HIGH PASS and LOW PASS paths (both filters have a 12 dB/oct. roll-off with a variable cut-off frequency from 20 Hz to 3 kHz). The rest of the vital tonal organs have had a thorough upgrade, which has resulted in an improved noise floor too. So, let's dive into everything that makes this pedal Deluxe.

Since the original Tyler was also used as an advanced AB/Y box by many, it was found that ground loops could occur - no more with Tyler Deluxe ! Both SENDs are now transformer coupled (with TRIAD Magnetics) to give you a nice and warm saturation, while avoiding ground-loops (internal slide-switched ground-lift). To be prepared for almost every situation and every pedal, both loops also got their own phase inversion switch (+/-) to get rid of potential unwanted phase cancellation.

The next new must-have feature is there to ensure the transparency of your setup; the good old CLEAN blend has been added

So far so good, but the deluxe delights don't stop here! A master phase-switch ensures a fixed and reliable interaction with your set filter frequency in every situation, no matter if you either have a loop engaged or not. But wait, for all of you who wants to follow Tyler's evolution, another claimed feature has been added. The LP-CUT and HP-CUT switches will now mute your loops when bypassed, which will give you tons of new options to be creative, by only using the engaged loops without having clean artefacts pass through when disengaging one of the loops.

Modern times brings modern needs, so Tyler Deluxe is now equipped with relay-based soft-switches, an internal step-up to increase the headroom for hotter input signals and low-noise op-amps to improve the overall sound-quality and usability.

Some fun examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the high-pass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the HP LOOP footswitch and you will never turn off Tyler Deluxe again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and Tyler Deluxe will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any of your dirt pedals, for a very pronounced and punchy sound all coming from one amp.

If there ever was a Swiss army knife for your tone, then Tyler Deluxe must surely be it. So, fire up your frequency saw and start defining your own unique sonic path.

Notes: With our WURM Distortion pedal, KMA Machines brought you a highly regarded, yet unabashed sonic love letter to the legendary filthy 'doom and gloom' distortion sound of the original Boss HM2 MIJ pedal, taking it much further and pushing the envelope of how destructive it could be.

Adorned in an iconic black and orange colour-scheme reminiscent of its inspiration, WURM 2 takes the essential ingredients of KMA's now classic pedal, adding the ability to switch between EQ settings right on the front of the pedal. In addition, we squeezed it into a smaller and more pedal board friendly enclosure with top mounted jacks, improved the electronics and enhanced it with relay-based silent switching, all helping to make WURM 2 a more flexible metal-distortion pedal than ever before.

Main Features:

High-Gain Metal Distortion pedal
Modern take of the classic and now sought-after original Boss HM2 MIJ
Wide range of metal-distortion tones from chainsaw, to plain evil and gritty
Highly configurable 4-band active EQ
3 distinct types of EQ frequency controls to tailor your tone now accessible on the front
Compact enclosure with top-mounted jacks will fit into any setup
True Bypass, with silent relay-based soft switching

Specifications:

Product Type:
High-Gain Distortion with Active 4-Band EQ

Bypass Type:
True Bypass

Power Supply Requirements:
9 V DC - Centre (-) negative 2.1mm

Current Draw (max):
>60 mA

Product Dimensions / Weight:
H: 60 mm / 2.36 inch
W: 74 mm / 2.91 inch
D: 128 mm / 5.04 inch
Weight: 350 g / 12.35 ounces

Calling a pedal legendary or a cult classic is often stretching the truth, but when it comes to the Boss HM-2 MIJ it's absolutely on the money. From its beyond brutal and grinding distortion tones, bands like Dismember and Entombed birthed Swedish chainsaw metal. While WURM 2 absolutely nails that death-metal sound, its thick walls of gain and sustain is not all about that genre the pedal is also adept for so many other styles, from Shoegaze to Prog Rock. To give you an idea, famous players like David Gilmour, Prince, Johnny Marr, Belinda Butcher, Lee Ranaldo, Daron Malakian and more have all made their mark with this style of distortion.

The TERROR control dials in all the malice and the evil distortion sounds you are searching for. Crank it up and feel the tremors of the WURM 2 under your feet, tremors that would even frighten the wits out of a young Chuck Norris!

EQ Section
Dead simple to operate, this tonally deep submergence vehicle offers three sub-octave settings to choose from.
These allow you to turn your guitar into a filthy bass guitar with ground shaking lows, alternatively adding extra depth to basses and mono synths alike. The toggle switch lets you select between either the first octave (-I), the second (-II) or mix both together (-I/-II) which gives you a thunderously massive wall of sound, it even changes colour depending on the mode.

EQ Style
For the WURM pedal, we developed our own EQ stack and added an internal EQ STYLE switch to help you carve out additional tonal variations. In WURM 2, this is now on the front of the pedal to make it easier to access and for even more tonal options on-the-fly. Selecting HM-II mode will get you that classic 'chainsaw' High-Mids character.
However, in KMA mode the EQ is a little more tonally balanced, less peaky and a bit wider in response. If balanced and less peaky sounds too boring for you, select BOTH to fatten and double up the tone stacking, letting you ramp up the LOWS and the H-MIDS and rip that Swedish forest completely to shreds!
With all of this extra tone shaping, the pedal can sometimes begin to feedback at extreme settings. So, if this proves too much and to help tame that high-frequency content, we added a new internal control to smoothen things out. By flipping the dip-switch to activate the input filter, this will help to tame the high frequencies when absolutely everything is maxed out.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, >60mA current draw)

Notes: TR-S

Power Tube Reactor

The feel and response of a tube amp, in a pedal. Meet a build-it-yourself pedal that delivers the warmth and response of a tube amp. The Nu:Tekt TR-S uses a Nutube to deliver previously unachievable compression thanks to exclusive patent-pending technology - meaning you get the feel of a tube amp even when recording or playing through a transistor amp.


What is a Nutube?
Developed by Korg; a Nutube - similar to a conventional vacuum tube/valve - has an anode grid filament structure, and operates exactly as a triode vacuum tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.

Overview

Meet a build-it-yourself pedal that delivers the warmth and response of a tube amp. The Nu:Tekt TR-S uses a Nutube to deliver previously unachievable compression thanks to exclusive patent-pending technology - meaning you get the feel of a tube amp even when recording or playing through a transistor amp.
Alongside amazing tone, one of the hallmarks of the Nu:Tekt series is that they're assembled by you! The TR-S kit doesn't require soldering, and the necessary tools are included - in fact, it's the easiest and fastest unit to assemble in the entire Nu:Tekt series!
Recreate the tube experience

The TR-S features an exclusive patent-pending circuit design, for compression that mimics the sag of a vacuum tube power amp - only possible with Nutube. Achieve this sought-after sound in any setting, even when playing through a transistor amp or recording into a DAW. The TR-S features four knobs on the panel, as well as three trimmer knobs hidden inside the top cover, allowing for even greater control over your sound. Go beyond the guitar and experience what the TR-S can do when you connect other instruments as well!

Easy assembly

Assemble the Nutube-driven TR-S with ease, just like a model kit - no soldering required. All necessary tools are included, along with a circuit diagram in the owner's manual. Perfect for those who love building their own effect units with top-notch performance and sound.

Specifications

Vacuum tube Nutube.6P1.
Inputs Mono 14" Jack
Outputs Mono 14" Jack
Power 9v battery, or DC9V AC adapter (both sold separately)
Approx. 5 hours battery life
Consumption 85mA
Dimensions 122 x 96 x 55mm
Weight 340g (without battery)

Notes: ***B-STOCK: Box opened, product in perfect working order***


3 Channel 80s/90s Preamp

The VESTA contains a brand new set of voices from KRS along with a familiar feature set. Based on a couple of your favourite amps of the 80s and 90s, you'll feel right at home. Picture a classic Crunch tone suitable for rock and blues, along with a familiar 90s high-gain sound. If modern extended range high-gain is your thing, the CERES delivered. If you're more at home on a 6 string, the VESTA may be your preference.

It's smooth, chunky, thick, and more low-mid focused. It takes boosts just like your favourite vintage high-gain amps. It responds incredibly well to the guitar's volume control. Note: The Clean channel is identical to the CERES'.

Top mounted jacks allow for easy integration into your existing pedal board. Unique to our pedal operation, we include 3 bypass modes - True Bypass, Buffered Bypass, and Clean Bypass. In True and Buffered bypass the pedal operates as expected, no tonal coloration. The Clean Bypass mode enables the top row of Tone and Volume knobs accessing the Clean channel. These various Bypass Modes allow for integration into any style of rig - from driving a power amp directly (Clean mode), hitting a clean amp down the chain on your pedal board (True Bypass mode), or at the start of your pedal board, driving your other pedals into a clean amp (Buffered mode).

The preferred operating method is to run the VESTA into the input of the effects loop return of any amplifier head or directly into a power amp, but it will also work just as well when run into a clean channel with some EQ tweaking. For example, a typical Fender style clean circuit sounds best with Mids cranked, Bass around noon, Treble around 9-10:00, and Bright OFF. Tweak to taste...

Time based effects (delay, chorus, flange, etc) should be placed after the VESTA, before the power amp. A simple loop switcher can even be used to create effects loop(s) between the VESTA and power amp.

The VESTA includes two integrated footswitch buttons to activate the 3 channels. The left button toggles between Bypass and Rhythm/Lead.

The right button toggles between Rhythm and Lead. With the Bypass Mode switch set to Clean, bypassing the pedal actually activates the Clean channel.

Both distortion channels have the same switches and controls, and work in the same manner. However, Rhythm is inherently tighter and more aggressive than the Lead channel. Lead is more compressed and smoother and fatter overall. The Clean channel is not designed to get the "pushed" sound with the Level increased, rather it is designed to stay clean.

The gain controls in all channels feature the same range from clean to saturated signals and operate as close as possible to the full size KSR amps. They function without any unwanted top-end artifacts typically associated with solid-state circuits. The VESTA EQ options then make for a highly versatile Pre-Amp pedal giving you as much control.

Notes: This is a digital effects pedal in a compact format, including reverse delay - pitch shifter - delay and modulated reverb.

Effects engine is 12 bit and includes analogue filtering before and after digital conversion, based on vintage eighties units' topologies, but it allows for all the effects to be simultaneously available.

Despite its complexity, operation is simple and intuitive, all functions are directly controlled by the corresponding knob.

Pots controls:

1-Blend controls mix of effects over final output signal
2-Octave blend mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component 5-Balance controls mixture from reverb and
delay.
6-Sample rate controls the frequency operation for the whole pedal, modifying delay time
and reverb decay.
7-Reverse blends the reverse component with the direct signal.

Indicators:

Signal: indicates clipping, the input path has compression and limiting so it gives an idea of how hard you are driving the pedal.

Tap: blinks at the rate of the delay, depending on tap and sample rate.

Tap/freeze: turns red while tapping time, blue indicates reverb freeze.

Bypass: global effect on/off

Footswitches:

1-Tap/ freeze works as a tap tempo for the delay and reverse delay, and freeze/infinite for reverb, selected by the associated toggle switch. Max delay time is around 6 seconds, depending on sample rate setting.

2-Bypass: buffered bypass for the whole pedal.

Power consumption: 150 milliamps.

Notes: Fuzz meets synth meets reverb in this clever pedal. Built-in drone VCO, noise generator, LFO and effects allow you to warp and twist input signals into completely new tones and textures.

Supplier's Notes:
Grone 2 Dark Drone machine Pedal Version

Blocks description

Drone VCO:

Generates sound based on equations converted to analogue signals, there are sixteen equations selected by algorithm up pot. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an expression jack input, EXP2 for controlling sampling rate.

NOISE GENERATOR: White noise with noise level pot.

Voltage Controlled Filter: MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION 1 amount pot, Expression jack input 1 controls filter cuttoff.

LFO1: Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

FUZZ Section: gain stage that affects input signal, with controls for input gain and level.

Effects Section: Consists of a chorused reverb with delay, adding octave up or down component, with freeze function

Pots controls:
1-Blend controls mix of effects over final output signal
2-Octave blends mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component
5-Balance controls mixture from reverb and delay.
6-Pitch controls the sampling rate of the whole effects section, modifying delay time and reverb decay.

Footswitches:
1- Synth: mutes or enables the drone VCO and noise generator
2-Filter: Bypass for the VCF
3-Fuzz: Bypass for the fuzz that processes the input signal.
4-reverb: Bypass for the reverb/delay section
5-Freeze: toggles freeze function for reverb section

Jacks:
Input, Expression 1 input (VCF) Expression 2 (VCO sample rate), Output

Notes: This new pedal in Maneco's line is a versatile fuzz device , true stereo and with powerful tone shaping capabilities.

Main features:

True Stereo operation
Silicon Transistors gain stage.
Big Muff tone stack
Buffered clickless Bypass
Input gain for fine tuning distortion quality, also adapting for wide range of input signals
Bass, guitar , drum machines and synthesizer friendly
9v standard power supply, center tip negative

Notes: While the OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar.

Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue - this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching. Even the PC board is the same one that Maxon's been using for the past 30+ years, complete with empty slots where parts for the FET switching circuit have been left out!

Like the original, the current production OD-9 features the NJM (JRC) 4558D Op Amp - an essential component for authentic "TS" tone. The NJM is smoother sounding and less compressed than other Op Amps, offering superior sound quality with low noise.

The absence of the FET switching circuit gives the OD-9 some added output and a slightly more open sound than the OD808, making it perfect for the classic rock tones that it helped to define.

If your future plans include a meteoric rise to rock & roll stardom, then rely on the legendary tones of the OD-9 to fuel your ascent.

The OD-9 is a true-to-spec reissue of the legendary 1980's OD-9/TS-9 circuit, with the addition of true bypass switching for clean, uncolored tone when bypassed.

TECH TALK:

Input is fed into a 2SC1815 emitter/follower transistor to optimize the signal's impedance structure. From here it's on to the first section of an NJM 4558D Op Amp - NJM is the company formerly known as the Japan Radio Corporation (JRC) - the legendary manufacturer that designed and built tons of these components in the late 70's/early 80's.

In this non-inverting Op Amp there are diodes in the feedback loop that clip the signal gradually as well as a High-Pass filter that keeps low frequencies from being distorted as much as high frequencies - the classic "808" configuration that creates the tone we all know and love.

After this is a passive LP filter and then an active tone stage that uses the other half of the Op Amp to create a HP filter that brings back frequencies cut by the inter-stage LP filter. After the tone stage it's through the volume pot, another E/F 2SC1815 to provide a low impedance output and then the true bypass switch.

The OD-9 features Mechanical True Bypass switching via a Fujisoku 4PDT switch - input signal is sent to ground when bypassed.

Input Impedance: 500K Ohms

Input Jack: 1/4 inch standard phone jack

Output Impedance: 10K Ohms or less

Output Jack: 1/4 inch standard phone jack

Outputs: 1

Equivalent Input Noise: -114 dB or less (input shorted IHF-A weighted)

Maximum Output Level: 0 dBm

Maximum Gain: +40 dB (at 1.5 KHz)

Controls: Drive, Tone, Level

Switch: Normal/Effect (true bypass configuration)

Power Supply: 9V Manganese dry cell battery (6F22) or special AC adaptor

Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor)

Current Consumption: 6 mA (9 V) / 7 mA (10 V)

Dimensions (whole): 74 mm (W) x 124 mm (D) x 54 mm (H)

Weight: 580 g

Accessories: 9V Manganese dry cell battery (S-006P) x 1

Warranty Card: x 1

User's Manual: x 1

Notes: A multi-voice synthesizer that will track your guitar for tight monosynth leads, complex chord polyphony, or multi-note sequenced arpeggiation. All without any special pickup installation. Just put it on your board and discover your own reality. The Enzo isn't limited to guitar; use it on any instrument whether drum machine, vocals or other synths. Completely transform your input signal and synthesize. Use the full synth palette of multimode analog style synth filters, ring modulation, envelopes and much much more to drive punchy, thick synth textures. Or, explore an altered state of your pure instrument signal by transforming it with pitch, time and modulation effects. Plug in to a revelation generator.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

Premium low noise Analog signal path throughout

Digitally controlled Analog Dry path for wet/dry mix

Analog Devices JFET input circuitry

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable translucent coat of vibrant gold over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall

Notes: A unique take on delay and looping, the Meris LVX is designed for ultimate flexibility when processing guitar, synth or line level sources. Stereo in/out, fully customisable signal path and supreme sound quality.

Supplier's Notes:
Meris LVX Modular Delay System

LVX is a Modular Delay System which breaks the paradigm of pre-set delay types in favor of freedom and flexibility.

A completely new UI and user experience has been designed from the ground up to make LVX immediately intuitive to navigate. The architecture of LVX allows ultimate creative freedom to design a custom delay.

The pedal features discrete processing elements and control signal modifiers that can be connected as desired for nearly infinite flexibility in crafting custom sounds. Make room for new memories.

Specs

Conversion: 24 bit A/D and D/A
DSP: 32 bit floating point
Sample Rate: 48000 Hz
Input Impedance: 1 Meg Ohm
SNR: 115 dB Typical
Frequency Response: 20Hz-20kHz
Max Input Level: +9 dBu (instrument level setting), +12.5 dBu: (line/synth level setting)
Power: 9V DC center-negative, 300mA, 2.1mm jack
Bypass: Selectable True Bypass (Relay) or Analog Buffered Bypass
Dimensions 7.25" wide, 4.5"" long, 2" tall. (Same depth and height as all other pedals.)
Weight: 24 ounces

Notes: Inspired by Vangelis' majestic soundtrack for the sci-fi masterpiece Blade Runner, Mercury7 is designed to send both humans and androids into an eternal dream state with its wealth of stunning reverb algorithms.

From subtle plates and huge cathedrals to massive building soundscapes, swirling modulation, epic auto-swells and cascading shimmering pads. Whether you're looking to capture the sound and feel of well-known earthly spaces, or that of huge starlit galaxies far away, the Mercury7 is sure to deliver!

Meris has left no stone unturned in their journey to bring ultra-advanced studio reverb capabilities to your pedalboard. The Mercury7 takes everything that made the original and highly regarded Mercury7 500-series studio rack-unit amazing and distils it all into a compact, sturdy and super intuitive pedal fit for any rig and instrument out there.

Mercury7 sports two different reverb algorithms (Ultraplate and Cathedra), which alone deliver a superb range of ambient tones. Now throw in the ability to modulate, pitch-shift, swell, sustain and EQ the reverb in a million different ways via its rich control set and ALT functions and you have a reverb pedal that has your back whether you're going for smooth on-stage ambience or otherworldly sound designs that could easily form the backdrop to your favourite movie.

In addition, Mercury7 holds one of the most impressive stereo reverb images ever made, vast MIDI capabilities and the ability to seamlessly morph between sounds via an external expression pedal. Mercury7 is in essence way more than just another reverb pedal. It's a deep and highly musical creative instrument in its own right.

Premium quality 24 bit A/D and D/A

32 Bit floating point DSP hardware

-115 dB Signal to Noise Ratio (typical)

Premium low noise Analog signal path throughout

Auto Swell Envelope (variable and foot-switchable)

Analog Devices JFET input circuitry

Wet/Dry signal mix occurs in the Analog domain

Selectable True Bypass (Relay) or Analog Buffered Bypass

Durable transparent blue powder coat over brushed aluminum

Current draw < 150 mA

Dimensions - 4.25" wide, 4.5" long, 2" tall

Notes: MOOER's reverb effects have been substantially upgraded in the first reverb pedal from The New Micro Series. This sparkling gem features seven different reverb effects catering to the far-out guitar astronauts and the psychedelic space cadets. Go to infinity and beyond with the Infinite Trail fade out or keep things brief with the traditional Trail On feature. The shimmering blue finish also adds a bit of sparkly flare to any pedal setup.

Features:
*7 different reverb effects from classic to psychedelic.
*INFINITE trail function.
*Trail On function allows effects to fade out naturally.
*Supports buffer bypass or true bypass.
*Storable preset for each effect.
*Firmware updatable via USB.

Specifications:
*Input: 1/4" mono jack (impedance 2.2M Ohms)
*Output: 1/4" mono jack (impedance 100Ohms)
*Power supply: 9V DC transformer (internal negative external), MOOER Micro
*Power is recommended
*Current Draw: 200mA
*Dimensions: 93.5mm(D) x 42mm(W) x 52mm(H)
*Weight: 155g
*Accessories: User Manual

Notes: MOOER has unveiled its latest effect pedal innovation, the MVP1 AUTUNER vocal processor. Unlike most of MOOER's products, this pedal is designed primarily for use with vocals, offering precise pitch correction and exceptional vocal enhancement features. However, MOOER hasn't forgotten about its primary audience, so AUTUNER still provides features that will interest guitarists.

Due to the pedal's primary focus on vocals, the device includes several features specifically designed for microphone usage. This includes XLR input and output, in addition to support for 48V phantom power, ensuring that the pedal supports both dynamic and condenser microphones. However, AUTUNER also includes standard 1/4" guitar inputs and outputs, along with convenient footswitch control to switch between mixed or individual signals.

The pitch correction features behind AUTUNER are highly versatile. With an LED button, users can choose between flat, warm, and bright vocal tones, each indicated by a different colour. Once a tone has been chosen, the 'correction' dial can be used to define the sensitivity of the pitch correction. Users can also press and hold the left footswitch to trigger the pitch correction's vocal synthesizer mode.

AUTUNER's versatility shines particularly brightly thanks to its built-in effects modules. The first of these is delay; the delay module can be can controlled with its dedicated dial, with users having the option to choose between tape delay, digital delay, slapback delay, or bypass. The pedal's left footswitch serves as a tap switch, which allows the user to determine the speed of the delay module.

A reverb module is also featured within AUTUNER. This too has its own dedicated dial, which can be used to morph between room delay, hall delay, and plate delay. Whilst the pitch correction features of the pedal are limited only to vocals, these delay and reverb modules ensure that the pedal has plenty of dedicated features to offer MOOER's guitarist fanbase.

As is common with MOOER products, AUTUNER features a wide range of control mechanisms. In addition to the left footswitch's dual functionality, the right footswitch also acts as a bypass for the pitch correction and effects, whilst still ensuring the tone processing remains active. The pedal's tonal enhancements can then be fully bypassed with the 'flat' tone option.

In addition to its core features, the MVP1 AUTUNER also includes a gain dial, a 48V phantom power switch for internal microphone amplification, a grounding switch, and a DC 9V 500mA power input. Overall, the features of this pedal ensure that musicians have everything they need for impressive pitch correction, vocal synthesis, and special processing, whilst ensuring that they never have to rely on external batteries.
Vocal pitch correction feature with a controllable sensitivity dial
Footswitch-controllable vocal synthesizer mode
Three vocal tone modes: flat, warm, and bright
Four delay modes: tape, digital, slapback, and OFF
Four reverb modes: room, hall, plate, and OFF
Tap tempo footswitch for delay speed
Bypass footswitch functionality for isolating the tone from effects
Multifunctional footswitches for 'hidden mode'
LED button for tonal control
Two output modes: mixed and individual
XLR input and output
1/4" input and output
Internal 48V Phantom Power amplification
48V Phantom Power toggle switch for condenser microphones
Line in toggle switch for instruments and dynamic microphone
Gain dial
Ground/Lift toggle switch
DC IN 9V 500mA power input

Notes: MOOER is proud to announce their first standalone drum machine pedal as part of the ever-growing X2 lineup of enhanced classics. The Drummer X2 is a powerful practice and live performance tool that provides players with a fully customizable groove station featuring 121 different drum grooves, 11 song banks, and a full array of EQ and parameter adjustments that can be made on the fly.

The Drummer X2 let guitarists employ the popular drum grooves from 11 different genres of music, with 11 different groove variations from each genre. Favorite grooves and tempos can easily be saved in one of the 11 song banks, each with 7 customized rhythm slots so they can quickly be recalled later. For fast cycling through presets, the Drummer X2 also supports external footswitches. In addition to the SPEED, GENRE, LEVEL, and PATTERN knobs, the Drummer X2 also boasts an EQ knob for making quick adjustments on the fly and for increasing compatibility with FRFR and non-FRFR devices. Timing can also alternatively be adjusted by utilizing the TAP TEMPO function with the right footswitch or external footswitch.

The Drummer X2 features a two-footswitch UI for fast toggling on/off, scrolling through drum grooves, and queuing up a fill using the FILL function, triggered by the right footswitch, all handled comfortably while playing. Specialized editor software is available to easily manage presets and update firmware and can be downloaded from the official MOOER website. Like with other X2 devices, the Drummer X2 includes Stereo I/O and a 14" External Control out for connecting a footswitch.11 different musical genres with 11 different grooves from each style.

Specifications:

Input: 2*1/4" mono audio input jack (impedance value 1Mohm)
Output: 2*1/4" mono audio output jack (impedance value 510ohm)
Num. of saving slot: 77
Num. of groove: 121
Power requirements: 9V 300mA, center negative (Original power supply is recommended, to avoid unexpected noise)
Dimension: 75mm(D) * 115mm(W) * 33mm(H)
Accessories: Power supply, USB-C to USB-A cable, Quick Guide, LOGO Sticker

Notes: E7 is the MOOER Polyphonic Guitar Synth Pedal is the second pedal of MOOER New Micro series. As a brand-new design Micro series, we have added 7 LED indicators on the right side of the shell, providing more possibility to the New Micro series.
E7 can transform your guitar into a typical electronic synthesizer, without the need for special pickups or instrument modifications. It is named as E7, for its seven different MOOER custom synthesizer tones. Each tone with an individual arpeggiator, high/low frequency cut, attack, speed function, allow users to shape the tone in their mind easily, explore the horizon of tone with the E7.

Features:
*7 different types of brand-new MOOER SYNTH tones
*Individual Arpeggiator for each tone
*7 slots for storing users' presets
*Firmware upgradeable via USB

Specifications:
*Input: 1/4" mono jack (impedance 2.2M Ohms)
*Output: 1/4" mono jack (impedance 100Ohms)
*Power supply: 9V DC transformer (internal negative external), MOOER Micro Power is recommended
*Current Draw: 150mA
*Dimensions: 93.5mm(D) x 42mm(W) x 52mm(H)
*Weight: 155g
*Accessories: User Manual

Notes: Proper futuristic amp modelling and effects courtesy of Mooer's next-level GE1000, featuring AI-driven auto-EQ and a five-inch touchscreen. Hook up to the GE Cloud app to edit and share sounds.

Supplier's Notes:
MOOER has consistently pleased the guitar pedal market with its GE multi-effect range, and its latest addition, the GE1000, is set to be no exception. The GE1000, built with a futuristic and sleek "Walking Star" design, builds upon past GE products, offering an even larger range of guitar processing effects, preamps, amp simulators, and features than previous entries.

The GE1000 comes preloaded with an impressive bank of guitar effects and amp simulations, but this is augmented further through MNRS GE Cloud support. MOOER's MNRS files consist of IR samples from real amplifiers, facilitating authentic feeling tones that can be downloaded, uploaded, and shared via MOOER's 'GE Cloud' app for free. The GE1000 also supports third-party IR files of up to 2048 sample points, enabling further expansion of the pedal's portfolio of amp simulators.

Further adding to the GE1000's impressive amplification and tone features, the GE1000 includes a cutting-edge AI-driven automatic equalizer, a first for MOOER. This automatically adjusts a 5-band EQ based on the user's playing and music style choice, providing further possibilities for creativity whilst still providing the flexibility of a manual-controlled EQ interface.

MOOER hasn't only focused on tone and pitch with the GE1000 exclusively, which is illustrated perfectly by the integrated Groove Station rhythmic toolkit, consisting of a style-specific drum machine and a looper. These features have been designed to work both independently and in tempo synchronization, making them adaptable for all types of jam. The looper even includes automated record and count-in functions, activating the loop recording when an input signal is detected, providing a unique hands-free looping experience.

MOOER has always excelled at providing innovative UI experiences, and the GE1000 is set to continue this trend. The pedal features a 5-inch high-quality coloured touch screen designed for intuitive multi-effect workflows while keeping some fan favourites from previous GE pedals. These include the signature MOOER multi-purpose control dials, buttons, and a quick-access expression pedal.

Additional flexibility can be found within the pedal's cutting-edge control systems, including programmable MIDI ports, bundled preset management software, and compatibility with the MOOER mobile app.

This level of flexibility is matched by the pedal's audio routing solutions, which feature Bluetooth playback, USB audio interfacing, serial and parallel TRS stereo FX LOOP compatibility, and industry-standard input and output ports.

Notes: The MOOER GROOVE LOOP brings together both the MICRO LOOPER and MICRO DRUMMER into one micro pedal, for the ultimate in a portable jamming companion. Both elements can be used independently from one and other or simultaneously.

When used simultaneously the looper will be automatically synchronised to keep in time with the selected drum groove, and an intro click will be played when recording the first loop to ensure you're in time with the groove.

The tap tempo button makes adjusting the groove speed very easy and independent playback level controls for both the Drums and the Looper ensure GROOVE LOOP is a breeze to dial in and adjust on the fly.

Notes: Excellent value from this smart little pedal, combining a looper with a built-in drum machine. Pick a rhythm backing, dial in a tempo and then improvise over the top to build up loops and grooves.

Supplier's Notes:
The Groove Loop X2 aims to serve as the ultimate looper and drum machine combo pedal whether in the practice room or on stage. The X2 looper features a whopping 14 save slots that can store loops of up to 10 minutes in length in each slot. Looper controls are familiar and flexible with the ability to toggle count-in mode on/off and an automatic mode that detects and begins the looper once an instrument signal is detected. Time Stretch functionality is also included to allow users to alter the speed of playback without affecting the original pitch.

On the drum machine, the Groove Loop packs in a huge variety of drum grooves separated by 11 different genres, each with 11 different variations that can be easily selected with the included GENRE and PATTERN knobs. Drum machine tempo can be set manually by Tap Tempo or when used in combination with the Looper, tempo will be automatically detected while playing.

The X2 edition of the Groove Loop also adds many requested features such as split stereo inputs and outputs. Looper and Drum machine can also be split to two different outputs for added flexibility. A justify function is included to make sure your drum groove and loop is perfectly in sync and free editor software cand be downloaded from mooeraudio.com and connected to the Groove Loop for easier editing of stored tracks.

Specifications:
Input: 2*1/4'' mono audio input jack (Impedance value 1M ohms)
Output: 2*1/4" mono audio output jack (Impedance value 510 ohms)
EXT CTRL: 1/8" stereo audio jack
Saving slots: 14
Total recording time: 140 minutes (Stereo audio)
Export audio file format: MP3/WAV/FLAC/APE
Sample rate/Sample depth: 44.1 kHz/24bit
Import audio file format: MP3/WAV/FLAC/APE
Export audio file format: WA
Power requirements: 9V 300mA (Center negative). Original power supply is recommended to avoid unexpected noise.
Dimensions: 75mm(D)x115mm(W)x33mm(H)
Weight: 0.334kg

Notes: MOOER burst onto the music products scene in 2010 and has been impressing guitarists ever since. However, the company has expanded it's horizons this year with its VP vocal processing pedal series. The MVP2 Harmonier is a powerful example of this - it's a versatile and innovative vocal processor pedal designed to elevate both vocal and guitar performance, offering tonal precision, creativity, and convenience in one compact pedal.

At its core, the pedal offers a versatile pitch harmonizer effect. The 'Key' dial allows users to choose to harmonize their important with any note in the chromatic scale, with the 'Sharp' LED button being used to select sharp notes. Once chosen, the 'Mode' dial facilitates further customization, offering 11 different harmony modes that control the harmony's interval. This includes all classic intervals such as octaves, fifths, and thirds.

The 'Level' dial adjusts the volume of the harmonizer effect, but Harmonier offers even further tonal flexibility thanks to its reverb function. Users can press and hold the 'Sharp' button while rotating the 'Level' dial, which allows them to adjust the volume of the pedal's internal reverb module. The pedal also offers tone modes: flat, warm, and bright. These can be controlled by activating the pedal's unique 'hidden mode' and using the 'sharp' button.

'Hidden mode' is activated by pressing and holding both of the pedal's footswitches, but this is just one example of Harmonier's unique control system. The left footswitch can be held to save effect presets, and pressed to scroll through 7 preset slots. The right footswitch can be pressed to turn on the pedal's effects, pressed again to isolate the reverb, and held to turn off all effects except for the tone setting.

Unlike most of MOOER's pedal offerings, Harmonier supports both XLR and 1/4" inputs and outputs. These can be used in 'mixed mode' by holding the right footswitch whilst plugging in the power supply or repeating this action again to switch to 'individual mode', which isolates the signals to their given ports.

Alongside its fundamental functionalities, the pedal features a gain dial, a 48V phantom power switch designed for internal microphone amplification, a grounding switch, and a DC 9V 500mA power input. Collectively, the MVP2 Harmonier's features guarantee that both vocalists and guitarists have all the necessary tools to augment their instrument's sounds with stunning harmonies, without ever having to worry about the pedal's batteries running low.
12 pitches with 11 different harmony mode
11 harmony modes that provide different harmonic intervals
High-quality internal reverb module with adjustable volume
3 tone modes: flat, warm, and bright
7 preset slots
Dual-functionality LED button
Two multi-functional footswitches
Customizable effect, tone, and reverb isolation
Two output modes: mixed and individual
XLR input and output
1/4" input and output
Internal 48V Phantom Power amplification
48V Phantom Power toggle switch for condenser microphones
Line in toggle switch for instruments and dynamic microphone
Gain dial
Ground/Lift toggle switch
DC IN 9V 500mA power input

Notes: Ever since MOOER launched onto the guitar pedal scene in 2010, it has been producing pedals that have consistently pushed the boundaries of audio effect processing. 2023 has seen many impressive new entries, but the new Harmony X2 is set to sit at the top of Christmas lists this year. This device is a highly specialized and versatile harmonic shifting pedal, complete with every harmonic capability a guitarist could need for live performance and recording.

First and foremost, users of the Harmony X2 can select between the 12 pitches of the chromatic scale to customize their harmonies, with each pitch facilitating both major and minor scales. Once a root note has been chosen, a further 11 harmony modes enable further customization of harmonic intervals, including classics such as thirds, fifths, sevenths, and octaves.

Interestingly, the Harmony X2 is designed to specifically facilitate independent stereo harmonies. This means that guitarists can choose separate harmonic intervals for the left and right output, both of which can also have their volume adjusted independently by their dedicated dials. This allows the pedal to stand out from other harmonic pedals, facilitating harmonically rich tones that make optimum use of the stereo field.

After experimenting with these versatile parameters, guitarists can finely tune the intensity of the effect with the 'Dry' dial, determining the level of unprocessed guitar signal in the overall mix. Once satisfied, users can then save their favourite harmonic combinations with the 'Save' button, enabling them to return to their favourite preset at any time.

Despite the advanced nature of the Harmony X2 pedal, its use has been designed to be very simple. A dual foot-switch setup is provided to seamlessly toggle harmonic effects independently for both left and right pannings, and a simple and sleek combination of dials and LED indicators help the user clearly visualize their harmonic effects.

The Harmony X2 supports standard 1/4" inputs and outputs, with both containing two ports to facilitate both mono and stereo usage. However, these can interestingly be used in 'mixed' or 'individual' mode, enabling outputs that either correlate or merge the stereo inputs. The pedal is powered by the included DC 9V power supply, ensuring that guitarists never are never limited by the frustrating process of swapping out batteries during a performance or recording session.

Features:
High-quality pitch processing module
12 pitch options with 11 harmonic modes
Two dials for isolated left and right harmonic customization
Two dials for left and right harmony volumes
Dedicated dial for adjusting the level of dry signal
Support for both major and minor scales
LED indicator for harmony mode
Two LED indicators for major or minor mode
Multi-purpose 'Save' button
Dual-footswitch setup for independent harmonic bypassing
Two 1/4" inputs, supporting both mono and stereo
Two 1/4" outputs that support stereo mixed or individual output modes
Powered by included 9V DC power supply

Notes: MOOER has been impressing musicians with its unique effect pedals for over a decade, and the new MVP3 Loopation is set to continue this trend. It's a versatile and feature-packed pedal designed to enable musicians to create seamless loops with their voice and instruments and is part of MOOER's recent VP series which provides versatile support for microphone input.

Loopation provides 11 save slots for recorded audio loops, with 8 of these slots featuring 5 minutes of recording time, and the other three having 10 minutes. Slots can be selected with the simple 'song' dial, and once audio has been recorded, the files will automatically save onto the device. The pedal offers two recording modes: real-time, and auto.

Recording in real-time mode is activated when the right footswitch is pressed, in the same style as traditional loop pedals. In contrast, the auto mode enters standby when the right footswitch is pressed and begins recording once signal is detected, stopping recording with another press.

However, the looping functions don't stop there. Pressing the right footswitch commences file playback, and during playback, another right footswitch press will enable dub mode, which will continue until the footswitch is pressed once again. Playback can be halted with two quick presses of the right footswitch, or alternatively by switching to a different save slot.

When playback is stopped, users can delete all recorded layers by holding the right footswitch for 1 second, or by holding the second 'stop' footswitch press. Finally, users can undo their dubs by holding the left footswitch whilst an overdub is playing and can complete this motion again to restore this deleted layer. If the musician wishes to reverse the audio file, this can be achieved through a single left footswitch press.

Loopation provides both XLR and 1/4" inputs, which can be used in either 'mixed' or 'individual' mode. Users can toggle between these modes by holding the right footswitch while plugging in the power supply. In mixed mode, both inputs will be active, which can be balanced using the 'mix' dial, whereas, in individual mode, the input signals will be isolated to their respective outputs. The master dial allows users to adjust the overall volume of both outputs.

Amazingly, Loopation augments these features further with built-in reverb and tonal effects. By holding the 'tone' button whilst rotating the 'master' dial, the reverb volume can be adjusted. The tone button can also be used independently to switch between the pedal's three tone modes: flat, warm, and bright.

Finally, Loopation offers a gain adjustment knob, a 48V phantom power switch tailored for internal microphone amplification, a grounding switch, a line-in switch, and a DC 9V 500mA power input. When combined with the impressive looping features of the pedal, musicians are left with a complete toolkit for full compositional processes, whether this is in the studio, at home, or during a live performance.
11 loop memory slots with up to 70 minutes of recording time
Unlimited overdubs within each memory slot
Features for overdubbing, deleting, undoing, redoing, and reversing recordings
Built-in volume-adjustable reverb module
Dial for adjusting volume balance between XLR and 14" input
Master volume dial
Dual-functionality LED button
Two multi-functional footswitches
Two output modes: mixed and individual
XLR input and output
1/4" input and output
Internal 48V Phantom Power amplification
48V Phantom Power toggle switch
Line in toggle switch
Gain dial
Ground/Lift toggle switch
DC IN 9V 500mA power input

Notes: The Looper X2 is the culmination of over a decade of experience developing easy-to-use standalone and combination pedals. The Looper X2 supercharges practice sessions as well as live performances by empowering the player to start jamming as soon as possible.

The Looper X2 is a dual-footswitch operated looper pedal aimed at providing fast loop creation with no shortage of space to save your favorite tracks and samples. With 11 song banks, each bank featuring 7 save slots, the Looper X2 provides a total of 300 minutes recording time (2.5 mins per slot in bank 1-9, 10 min each in bank 10, 11). Each slot also corresponds to common song structures as to make organizing sections and tracks easier, as indicated on the front of the pedal. Save slots and recorded tracks can also be managed using the specialized editor software that can be downloaded for free, and compatible with Mac and Windows PCs.

Additional features of the Looper X2 include a FADE knob for controlling and toggling the Fade out function for each loop. Users can also toggle an Auto Rec function to start recording a loop every time a guitar signal input is detected by employing the THRESHOLD knob. Additional knobs include separate volume level controls for Recording and Playback, as well as an 11-option knob for scrolling through the song banks. The dual footswitch setup offers familiar Looper controls and for users desiring more control, the Looper X2 also supports an external footswitch that can perform a variety of operations like cycling through different parts of the current selected song bank. See the manual for more information on compatibility.

The Looper X2, like with other X2 devices, includes Stereo I/O and a 14" External Control out for connecting a footswitch as well as True Bypass to stay quiet when not in use.

Specifications:

Input: 2*1/4" mono audio input jack (impedance value 1Mohm)
Output: 2*1/4" mono audio output jack (impedance value 510ohm)
Num. of saving slot: 77
Recording capacity: Approximate 300 minutes (stereo)
Sample rate/sample depth: 44.1kHz/24bit
Import audio file format: MP3/WAV/FLAC/APE
Export audio file format: WAV
Power requirements: 9V 300mA, center negative (Original power supply is recommended, to avoid unexpected noise)
Dimension: 75mm(D) * 115mm(W) * 33mm(H)
Accessories: Power supply, USB-C to USB-A cable, Quick Guide, LOGO Sticker

Notes: MOOER, a leading music gear company, is proud to announce the release of Micro Looper II, a powerful and compact loop pedal that provides an impressive 480 minutes of recording time spread across three saving banks.

Featuring three saving banks and 16 slots per bank, the Multi-Saving-Slot Micro Looper Pedal offers users up to 480 minutes of recording time, with each slot providing up to 10 minutes. The pedal also includes unlimited recording layers, allowing musicians to easily create complex and layered loops.

With its AUTO REC function, the Micro Looper II automatically starts recording as soon as an input signal is detected, making it easy to capture spontaneous musical ideas without having to press any buttons.

Specifications:

Number of saving slots: 48
Maximum recording capacity of each slot:10 minutes
Sample rate/sample depth: 44.1kHz/24bit
Input: 1/4'' mono audio jack (impedance value: 470k ohm)
Output: 1/4'' mono audio jack (impedance value: 100 ohm)
Power requirements: 9V 120mA, centre negative (it is recommended to use the isolated power supply to avoid unexpected noise)
Dimensions: 93.5(D) × 42 (W) × 52mm (H)
Weight: 157g
Accessories: Owner's manual

Notes: The new Preamp Model X comes loaded with a host of new features that make it easy to customize your digital preamp and cab setup. Featuring 3 global cab sim files, support for third-party impulse response files, and 14 preset slots, each with two different channel settings to customize, the Model X offers plenty of space to prepare for long gigs or the freedom to explore and save different tonal combinations.

Where the Preamp Model X excels compared to previous Mooer preamp pedals is in the user interface and digital editor software. The expanded footswitch layout of the X2 gives users two settings to choose from: one for preset scrolling and one for A/B channel switching. This allows users to quickly cycle through presets at just a tap of the foot. The editor software is free and can be downloaded from Mooer's website (www.mooeraudio.com) and allows users the comfort of a desktop interface when customizing and tweaking presets, loading third-party impulse response files, or updating the Model X2's firmware.

The Preamp Model X has been specifically designed to be compatible with files created using Mooer's MNRS sampling technology. Simply download these files from Mooer Studio (www.mooerstudio.com) and load them into your Model X2 using the editor software. The Model X2 is also compatible with Mooer's GIR/GNR cab sim files as well as other major third-party impulse response filetypes.

Specifications:

Input: 1*1/4" Monoaural jack (Impedance value: 1M ohms)

Output: 1*1/4" Monoaural jack (Impedance value: 510 ohms)

Num. of Preset Slot: 14

Num. of Factory Amp Model: 28 (Can be replaced by imported GNR file)

Num. of Factory Cab Sim: 3 (Global cab sim, can be replaced by imported GIR/IR file)

IR Spec: 44.1kHz/24bit/1024points

Power supply: 9V DV center negative (Please ensure the voltage value of power supply is not more than 9V, ensure the polarity is correct.)

Current Draw: 300mA

Weight: 0.334kg

Dimensions: 75mm(D)*115mm(W)*33mm(H)

Accessories: Owner's manual, USB TYPE-C to TYPE-A cable; DC 9V power supply, sticker.

Notes: MOOER has been impressing musicians around the globe since 2010 with its cutting-edge guitar pedals, and this is set to continue with the new MOOER Purer Octave pedal. MOOER has taken a minimalistic and sleek approach to the design of Purer Octave, whilst leveraging a cutting-edge repitch algorithm to go beyond the functionality of regular octave pedals.

Purer Octave provides guitarists with 15 different polyphonic octave effect combinations in addition to one detune effect. The DSP algorithm separates the high and low input frequencies to ensure every preset operates seamlessly without spectral artifacts or distortions. These two frequency bands can be isolated or combined dynamically through the independent "SUB" and "UPPER" dials, allowing guitarists to finely craft the perfect effect to suit their specific needs.

Despite the minimalistic interface, Purer Octave users can still save their own presets by using the pedal's three-way toggle switch. Guitarists can choose whether to use the pedal's dials in real-time to craft their sound and once they are satisfied with the effect, they can leverage the three-way switch to save their favorite effects. Bypassing the effect simply requires a foot press from the guitarist, the status of which is indicated via an LED light.

Purer Octave is presented within a compact pedal case with a glossy orange finish, complete with an intuitive and tidy user interface. The pedal provides a standardized 14" mono input and output, powered by a 9V DC power port. These features ensure that Purer Octave can be used on the move by any guitarist, offering a truly flexible and intuitive product for octave effect perfection.

Specifications

INPUT: 1/4" mono audio jack (impedance value 470k Ohms)
OUTPUT: 1/4" mono audio jack (impedance value 100 Ohms)
Power supply: 9V DC (center negative)
Current draw: 120mA
Dimension: 93.5 (D) × 42 (W) × 52mm (H)
Weight: 157g
Accessories: Owner's manual.

Notes: MOOER, one of the world's leading guitar pedal innovators, has never been a stranger to octave pedals. The company has already enjoyed a successful response to its "Pure" and "Purer" Octave pedals, but the company's latest offering, the Tender Octaver X2, aims to take guitar octave capabilities to the next level.

Unlike the Pure and Purer Octave pedals which focus on pitch-shifting by the semitone, the Tender Octaver X2 is designed with a more specialized intention, focussing solely on octave shifts. When using the pedal, users can choose between two different octave shift modes, facilitating the addition of both subjacent and upper frequencies to a guitar signal. Both options have two dedicated rotatable dials, one for determining the volume of the added octave, and one for fine-tuning its tonal colour.

Both of these octave effects can be used independently and can be toggled on or off with their own easy-access footswitches, each paired with its own LED light to indicate its current activation status. Furthermore, both effects can also be used simultaneously, empowering guitarists to experiment with unique tri-octave guitar presets.

However, these subjacent and upper octave effects need not be explicit if the guitarist using the Tender Octaver X2 is looking for a more subtle octave manipulation. Thanks to the octave volume dials and the "Direct" dial for dry signal volume adjustment, anything from an explicit pitch shift to a subtle octave underlay can be achieved within the same pedal.

The pedal also contains 14 preset slots, allowing users to experiment and save their favourite parameter combinations with the "Save" button. In classic MOOER fashion, this has been presented in a minimalistic fashion, with 7 LED lights representing the full range of 14 save slots, lighting up blue or red depending on which half of the slots are being browsed. Each slot can be saved into or browsed through the two "Sub" and "Upper" footswitches, providing a further example of MOOER's dedication to making the most out of a minimalistic interface.

Using the pedal will be as simple as plugging it into the included DC 9V power supply, and plugging in a guitar with a standard 1/4" guitar cable. Overall, the Tender Octave X2 is set to be an exciting new addition to MOOER's octave pedal catalogue, and if paired with the "Pure" or "Purer" Octave products, just about any pitch-shift combination is made possible for guitarists of any style or experience level.

Features:
Precise octave-shifting DSP algorithm
Two octave effect options - subjacent and upper
Two effect volume dials, one for each octave
A 'Direct' dial for adjusting the dry signal volume
14 unique user preset slots
A dual-function 'Save' button for presets
7 dual-color preset LEDs, with red representing one half of presets, and blue representing the other half
Two additional LEDs, indicating the activation status of both octave effects
Two footswitches that function both independently and simultaneously for effect toggling and preset browsing
1/4" mono input and output
DC 9V power supply
Minimalistic and compact casing design

Notes: Black Truck combines 6 individual effects pedals, a high precision tuner, an effects loop and a loop switcher, bringing them all together into a single portable unit that's built for the road.

Although incredibly versatile and useful as a tool for all styles of music, Black Truck has been designed primarily for hard rock and heavy metal musicians. With this in mind, a carefully selected array of popular analogue pedals from the Mooer Micro Series make up the Compressor, Overdrive and EQ modules.

A brand new 'amp like' analogue hi-gain distortion has been developed specifically for this product which, in itself, covers a huge spectrum of tonal possibilities and a wide range of gain.

These analogue modules are complemented well by a multi-modulation pedal and a digital ambience engine, simply named Space, which consists of a high-quality digital delay and a stereo reverb. Both of these digital modules are fully controllable by the dedicated tap tempo control footswitch.

When used in conjunction with the integrated loop switcher, Black Truck can very easily be programmed to provide one step presets.

Following a lot of feedback previously from the Red Truck, an independent volume control has been added to the cab simulated output so it can be used simultaneously with the main outputs.

Notes: Second-gen Immerse offers true studio-quality stereo reverb in a compact pedal format. Eight high-quality algorithms with simple, user-friendly controls and top quality sound. Lush.

Supplier's Notes:
The Immerse Mk II raises the bar with eight rich stereo reverbs in one easy to use pedal. No user manual required. Experience studio-quality tone that can be used with instruments of all stripes.

Five controls:

Effect Select
Mix, from 100% dry to 100% wet
Reverb Depth
Tone / Echo Time / Hold Time (depending on effect)
Pre-Delay / Modulation / Blend (depending on effect)

Specifications:

Electrical

Input level: instrument / consumer line level
Input impedance: > 1 MO
Gain: unity
Frequency response: 20 Hz - 20 kHz
Total harmonic distortion: < 0.005%
Signal-to-noise ratio: > 107 dBA

Power

Input: 9-12 V DC, 80 mA
Connector: center-negative, 5.5 mm OD x 2.1 mm ID

Physical
Dimensions: 2.9" x 4.6" x 2.0" / 73 mm x 117 mm x 51 mm
Weight: 8.84 oz / 251 g

Notes: Modulated digital reverb with an analogue dry signal path, the clock control lets you adjust the core frequency of the DSP, creating a smooth pitch shift in time, allowing you to create from a sharp traditional plate-like reverb to an underworld cavernous ambience.

Dedicated sustain footswitch to create an infinite modulated ambience, trails option to combine momentary activation and be able to add lush movement at any time.

Soft footswitch bypass latch & momentary
2 Modulation depths (off @ center position) MOD toggle
DSP clock control for deep cavernous textures
Trails toggle
2nd delay line with analog feedback
Pre-delay
Damp control
Infinite sustain footswitch
Top mounted jacks

Notes: True bypass studio-grade compressor in small form factor offering full control of your overall tone. OTA based parallel compression with variable output current, input voltage controlling a carefully designed envelope circuit. Optimized for low noise operation.

Analogue compressor with OTA topology
Controls: Ratio, Threshold, Release, Attack, Brite (high cut), Level (compressed signal), Blend
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: Dual channel analogue overdrive with real tube-like compression featuring 3 clipping options with carefully hand picked germanium diodes, smooth and sensitive to picking strength.

3 different gain levels from clear boost with a touch of dirt to high gain overdrive, full EQ with air control to manipulate the presence of your pickups, a MOSFET boost circuit lets you push your amp into natural breakup.

Order toggle switch to add volume or an extra gain stage.
Side A: BB style circuit with bass, air, treble, drive and volume control
Ge, Si and LED asymm clipping toggle
3 level gain toggle.
Side B: MOSFET boost +20dB with level control
A > B or B > A stack order toggle
Top mounted jacks

Notes: Full featured stereo digital delay with an analogue dry signal path, carefully designed algorithms to cover all the delay needs in any genre, from pristine clear echoes and warm repetitions to trembling modulation.

The secondary footswitch options will let you manipulate the most important features while allowing you to play your instrument. Infinite repeats or insta-wobbles are at the tip of your toes.

6 complex delay algorithms: Digital, Analog, Tremelo Delay, Chorus Delay, Chorus +Tremelo, and Filtered Delay
Stereo TRS output (Tip mono)
Soft footswitch bypass latch & momentary.
Tap tempo/RAMP for infinite sustain or modulation via S R M toggle
True Bypass, Buffered or Trails via TB B TR toggle
Tempo divisions
Damp control
Modulation
EXT jack (Tap Tempo & RAMP)
Top mounted jacks

Notes: Analogue tones are on the menu with this beautifully designed bucket brigade chorus/vibrato. Warm, organic sound with lots of modulation options and expression pedal input.

Supplier's Notes:
The Tempest features a full analogue pitch shifting circuit designed around a BBD chip

Offers digital control and 4 different RAMP options over Rate, Depth or Blend.

Expression or Ramp are selectable via firmware, and the expression jack can be used for external tap/ramp & engage control.

Lag Control
4 different wave shapes
Tone control
Blend 100% dry CCW, 100% wet CW and rich lush chorus at 50%
Rate, Depth and Blend ramping engine
Tap tempo w/subdivisions
Ramp up, Ramp down, bounce up&down, bounce down/up
EXP or CV input jack to control over ramp parameters
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: The ODR-1 30th Anniversary Overdrive - Limited Gold Sparkle Edition commemorates three decades since the pedal's introduction in 1993.

Ideal for blues and crunchy rock sounds (or for that extra punch when soloing), the Nobels ODR-1 has been the first choice and secret weapon for many players and top studio guitarists for 30 years. To celebrate this milestone, Nobels have produced a very special gold sparkle finish edition and added a new versatile and convenient Bass Cut Pot for more even more tonal flexibility.

Limited to 5000 units worldwide, each pedal is numbered and includes a certificate, a sticker, a special plectrum and features the original ODR-1 front cover design.

The top selling ODR-1 pedal has developed its own almost cult following since it was first designed and engineered way back in the eighties. At NAMM 2020, the pedal was upgraded to the now current ODR-1BC model. With the addition of a (much-requested) bass cut switch to help tame low end (if needed for humbuckers etc.) as well as newly developed power circuitry for enhanced headroom, it makes the pedal way more versatile for the modern age.

However, in celebration of three decades of Natural Overdrive, the ODR-1 30th Anniversary Overdrive now features an even more useful and convenient variable Bass Cut Pot, based on feedback from musicians around the world. It also retains all the other upgraded features from the BC model such as higher headroom and Glow-in-the-Dark knobs, as well as Nobels' Spectrum control- one of the most important ingredients of the original pedal's success.

The very special gold sparkle finish makes this edition look as stunning as it sounds and only a limited number of ODR-1 30th Anniversary Overdrive pedals will be released, just 5000 worldwide.

So grab a piece of legendary overdrive history while you can!

Notes: Ideal for blues and crunchy rock sounds (or for that extra punch when soloing), the Nobels ODR-1 has been the first choice and secret weapon for many players and top studio guitarists for nearly 30 years. In fact, this top selling pedal has developed its own almost cult following since it was first designed and engineered in the eighties.

When the original circuit was developed, there seemed to be countless overdrives on the market that had what many people describe as a 'nasal' tone, but Nobels worked hard on creating a very 'open' sounding pedal that works with you and your amplifier. The result was the ODR-1, German engineering at its finest with stacks of resistors and capacitors forming very precise filters and signal shaping, giving you a pedal that responds to your dynamics and adds texture to your tone in a very natural, musical way - all while allowing the character of your guitar to be fully retained.

Step forward to 2020 with the latest model ODR-1BC.

With numerous requests from the pedal community and professional players worldwide, Nobels have added the option of an internal Bass Cut switch under the battery cover to help tame your low end if needed. In standard mode though, you still get the full frequency response of the original that is perfect for warming up single coils etc. In addition, the internal power circuitry has been increased to allow for 9-18 V capability to provide extra headroom, if your playing styles and tone goals require it. These new features haven't altered the fundamental tone and vibe, but have increased the versatility of the pedal massively for modern rigs.

With the drive control, the distortion can be easily adjusted from almost clean to maximum drive. The circuit also works very well with your guitar's volume control, so by backing off the volume you can clean up your tone. The tonal range is controlled by the Spectrum control tone pot with mid-click and fluorescent pointers on the Glow-in-the-Dark knobs. Turn the knob clockwise and it increases the bass and treble at the same time, while turning it counter clockwise has the opposite effect. The midrange stays untouched in either direction, to ensure a transparent yet warm tone wherever the Spectrum knob is placed.

Notes: The ODR-mini delivers creamy, natural overdrive - Everything from pushed clean amp tones to gain filled stacks! It has the same tones as its legendary brother - the ODR-1. You'll love the warm mid-gain tones for rock and blues, and the screaming hard rock sounds from the ODR-1 Mini. Plus the mini features true-bypass switching, the SPECTRUM pot with mid-click, fluorescent pointers on the "GitD" - knobs (Glow-in-the-Dark). Guaranteed to be a BIG part of your sound while a small part of your pedal board.

Electr. stab. power supply 9-18 Volt DC, with min. 100 mA, 2.1 mm plug, center negative, (optional)

Effect-Type: Overdrive
Analogue
Mono/Stereo: Mono In, Mono Out
Control: Drive, Tone, Level
Bypass Modus: True Bypass
9-18 Volt, center negative
Consumption 25 mA
Dimensions (BxLxH / mm): 42 x 93 x 50
Weight: 175 gr
Country of origin: China
Solid metal housing
Low current consumption
inkl. tape

Notes: The Reissue series 6ixty 5ive overdrive puts the sound of the famous1960s black panel amplifiers right at your feet. Emulating the drive of these classic models gives a range of tones from just over-the-edge all the way to burning tube overdrive whilst retaining the guitar's natural voice and clearly defined edge. The all analogue circuit has a Gain control to adjust the amount of drive and the resulting output is balanced by the Level control. A Trim pot on the rear of the pedal further controls the saturation of the gain stage, bringing natural sounding compression and sustain into play. Bass and Treble controls provide tone shaping as you would find on a classic amplifier. Use as an "always on" drive pedal or switch in for a gain boost with a classic edge whenever the mood needs it.

Classic 1960's black panel amplifier tones
Level and Gain with Trim pot for drive & saturation settings
Bass & Treble EQ controls
True bypass switching
Batteries9V PP3 (supplied)
Power supply: Optional 9Vdc 300mA regulated (not supplied)
Controls: Level, Gain, Bass, Treble, Trim & foot switch
Input impedance: 1M Ohms
Output impedance: 10k Ohms
Dimensions: 121 x 77 x 48mm
Weight: 230g

In the box

The box for this item contains :

Reissue series 6ixty 5ive overdrive pedal
9V PP3 battery

Notes: Amp Academy Pedal

The Amp Academy is a complete valve amp modelling rig in a compact stomp box format. 3 storable scenes with 2 channels, selectable from 6 separate classic amplifier models. Each patch has Gain, Master and Boost for overdriven tones and 3-band EQ + Presence control. As with a real professional tube amp, there is an effects loop and internal rever effect. The addition of a noise gate helps to keep everything silent when no notes are played. Balanced or unbalanced outputs give flexible options for live performances via FRFR speakers, mixing console, or even for direct recording. All settings are fully editable via USB using the proprietary Amp Academy software and even self-made or third party IRs can be loaded for custom amp modelling. Next time you are carrying your heavy valve amplifier around, consider this incredibly flexible and pocket-sized alternative.

Power supply: 9Vdc, 100mA (min) pin-negative (not included)
Controls: Gain, Master, Boost, NR, Bass, Middle, Treble, Presence
Connections: Guitar in/out (6.3mm), Loop (6.3mm TRS), Aux (3.5mm), DI (XLR)
Dimensions: 115 x 105 x 58mm
Weight: 440g