Back catalogue: Studio Equipment

Notes: Acoustic isolation pads decouple monitor speakers and eliminate vibrations/resonance, and in some instances eliminates resonant coupling from the surface to which the speakers are situated.

Using the angled isolation pads gives greater detail and depth across the frequency spectrum, allowing for easier and cleaner mixing. The high density foam allows the speaker to be separated from the surface while the non-slip surface ensures the speaker stays in place. The kit contains 2 components for different configurations (horizontal/angled).

Product Dimensions (mm): 250x370

Notes: Two height adjustable monitor stands

A pair of high quality studio monitor stands with unique auto-lock ratchet system and tripod base

High quality studio monitor stands

Adjustable height up to 1.1 metre / 43.3 inches

Auto-lock ratchet system

3 x foot tripod base for easy studio placement

Height: 680mm x 1100mm / 26.7 x 43.3 inches
Maximum load: 40Kg / 88lb
Material: O 35mm / 1.37 inches aluminum pole and steel outer pole
Surface and colour: black powder coated
Weight: 3.2Kg / 7lb
The top plate is 224mm x 232mm

The Novopro SMS80R studio monitor speaker stands have been designed for ease of use as well as safety. The stand has an integral auto-lock ratchet system which allows you to adjust the height and lock in that adjustment without the usual slipping, dropping and inconvenience you get with standard monitor stands.

Kit includes the following:

2 x SMS80R monitor speaker stands
1 x allen (hex) key
2 x cable management clips
1 x instruction manual

Notes: Two steel monitor stands, extendible from 75-130 cm. Max. load each: 30 kg.

- Adjustable monitor stands with cotter lock
- Particularly suited for 5.1 systems or close-range monitors
- Sturdy cast iron foot
- Comes as a pair
- Powder-coated steel version
- Colour: Black

Notes: Adjustable Studio Monitor Floor Stand

The adjustable monitor floor stand by QTX is perfectly designed for studio and home use, providing a sturdy platform for your speakers. Adjust the height of the stand using the hand fastener and safety pin to one of the 5 height positions, up to 540mm high. Foam surface pads are provided to minimize unwanted vibrations and ensure your monitor stays firmly in place. This stand is recommended for use with small and midfield studio monitors. Maximum weight capacity.

Plate dimensions: 240 x 230mm
Base: dimensions: 250 x 225mm
Height: 300mm (minimum)
Height adjustments: 340mm, 390mm, 440mm, 490mm, 540mm
Max. weight load: 15kg
Weight: 2.53kg

In the box

The box for this item contains:
1pcs adjustable studio monitor floor stand

Notes: Elevated Desktop Speaker Stands

These desktop speaker stands from QTX are compactly designed for use in the studio, home and office. These stands provide a platform for your speakers allowing perfect positioning and optimize listening height. Foam surface pads are provided to minimize unwanted vibrations. These stands are designed for use with small nearfield monitor speakers and bookshelf speakers.

Plate dimensions: 160 x 130mm
Base dimensions: 190 x 130mm
Height: 130mm
Max. load: 5" speaker
Dimensions: 190 x 130 x 130mm
Weight: 2.3kg

In the box

The box for this item contains :
Elevated Desktop Speaker Stand Pair

Notes: The new MS Series studio reference monitor stands from Ultimate Support offer unparalleled innovation and strength for professional, project, and home studios alike. The MS-80 is a desktop monitor stand that features non-slip, high-density acoustic foam and an angle-adjustable base that allows the end user to fine tune the sweet spot. The MS-90 is a column monitor stand that offers internal cable management channels and 6000 Series aluminum construction while the MS-100 is essentially a combination of the two!

From top to bottom, all three MS Series stands feature sonic isolation and decoupling components. The MS-90 delivers four non-marring sound decoupling pads that stabilize monitors of varying sizes. The MS-100 and MS-90 feature two rubber couplers between the column and the top/bottom plates and spike decoupling designs under the top and bottom base plates. Add the MS-90 to your studio and discover what you've been missing in your mix!

The MS-100 and MS-90 offer three internal channels that run the length of the column. So your studio remains clear of untidy cables, two channels are designed for audio and power respectively. For additional stability, the larger third channel can be filled with shot or sand.

The MS Series studio monitor stands are made from the highest quality materials, such as Series 6000 aluminum, and backed by award-winning design that marries both form and fashion. The modern studio owner will love the contemporary look while the veteran engineer will appreciate the solid build and versatility.

Depending on the needs of your studio, the MS-90 is available in two studio standard heights: 45" and 36". Both are identical in construction and features except for height. Choose the height that's best for your studio design!

Notes: ***B-STOCK: Original box damaged, product in different packaging but product is in perfect working order***


iKlip Grip Pro is the new large-grip, compact multifunctional iPhone and camera stand with an integrated detachable Bluetooth shutter control that is really 4 accessories in one: super secure tabletop tripod, large-grip video handle, monopod handle and standard tripod adapter. iKlip Grip Pro can securely hold any iPhone with or without a case, and features a standard mounting system for connecting small mobile video cameras like GoPror, compact digital cameras and stand-mount audio field recorders.

iKlip Grip Pro features a large, ergonomic handle that expands into a sturdy tripod, an integrated locking extension pole that extends up to 62 cm (24") for getting those "above the crowd" shots and selfies, plus a detachable Bluetooth shutter control for remote shooting.

It's all about the Grip:

First, iKlip Grip Pro is designed to firmly hold your iPhone. Second, iKlip Grip Pro is designed so you can firmly hold your iPhone because actually, you need both.

Firm Grip - Hold the Phone:

The secret to iKlip Grip lies in its ingenious expandable and secure holding bracket that allows you to precisely position your iPhone at any angle for capturing photos, video and audio. iKlip Grip Pro features an expandable spring-loaded soft-touch rubber bracket that provides secure superior holding power, and it holds your iPhone with or without a case for an added layer of protection. Repositioning your iPhone is as simple as expanding the brackets to release it then re-securing it. And the iKlip Grip Pro holding bracket features standard UNC 1/4"-20 tripod screw threads so it can be mounted to any standard tripod as a mobile device adapter.

Firm Support - the tabletop tripod

iKlip Grip Pro has a large ergonomic (a fancy name for "designed to actually fit in your hand") design that is comfortable and really "fits" your hand. The new larger grip is perfect for stabilizing video and capturing "blur free" photos, especially in zoom modes.

And while the base for iKlip Grip serves as a sturdy, steady handle when you're at a concert or trying to grab the perfect shot of the band for your Facebook feed, it also transforms itself (with a little help from you) into a compact tabletop tripod you can position on any relatively level surface for ultra-steady media gathering. The trick lies in its ingeniously designed locking handle - when closed and locked, iKlip Grip Pro is a handle suited for most "handler" tasks like selfies or ultra-steady video shooting on the go. But when unlocked, the handle magically transforms into a firm and sturdy tabletop tripod that is ultra-secure and steady. In tripod mode, you can easily shoot steady video and photos from a single location, or use the front-facing camera for hands-free FaceTime with your friends or live broadcast. All you have to do is fold the legs out you'll have a nice tabletop tripod for your video chats, Facebook Live, SnapChat or Periscope productions.

Firm Extension:

iKlip Grip Pro also features an integrated ultra-stable, locking 4-segment telescopic extension pole. At any time you can simply unlock the pole and extend it to your desired length, up to a max of 62 cm (24.4"). And since the pole is integrated into the design, no additional assembly is required - it's always there and ready.

The pole extension is perfect for the distant "selfie", but also ideal for getting "above the crowd" for audience-less band shots, closer-than-they-appear shots and anything in between. The extender also works in tripod mode so you can position your iPhone at the perfect distance above the table top.

Remote Control:

iKlip Grip Pro comes with an integrated yet removable Bluetooth smartphone shutter remote control that lets you remotely activate the shutter button in video and photo apps. A holder clip on the handle lets you use it as a thumb-activated shutter control, or when using iKlip Grip Pro as a table top tripod, you can easily detach the controller to capture shots remotely - perfect for shooting live video of your band or taking group photos. The remote is universally compatible with iOS 5.0 and above and can be operated up to 10 meters away from the device, perfect for capturing live performances, family vacation photos, movies and selfies.

Tripod Adapter:

If you remove the iPhone holder grip from the iKlip Grip Pro, you'll actually have two products: a standard UNC 1/4"-20 universal handle, monopod or tripod for small digital cameras and action video cameras, plus a secure grip iPhone holder that can be used on standard tripods. This is handy when you need a more professional tripod in demanding situations but still want to use your iPhone for capturing stills and video.

Notes: Many monitoring setups contain a subwoofer as an essential ingredient. Although many studio monitors such as the aktiv 05, uniK 04 or uniK 05+ for example, provide sufficient bass frequency response for many applications, adding a aktiv 10s subwoofer will help you to provide a much better picture of the low frequencies in your mix. Whether you are producing classical 2.1 sound or 5.1 / 7.1 surround sound productions, aktiv 10s will easily and quickly become an important part of your monitoring setup. It's compact size with a stylish design, yet powerful output will easily convince you.

Features/specifications

10" bass reflex powered subwoofer
Amplifier power: 150W@100Hz, 4 Ohm, 0.1% THD
Subwoofer crossover frequency: 50Hz - 180Hz (adjustable)
Separate satellite output crossover frequency: @100Hz and flat (adjustable)
Phase control
Input level control
Power mode: standby and on
Inputs: balanced XLR, unbalanced 1/4" TRS
Outputs: balanced XLR
Input impedance: 20kOhm balanced, 10kOhm unbalanced
Foot switch input as mute control
Dimensions: 340mm(H) x 340mm(W) x 340mm(D)
Weight: 14 kg

Notes: CR8S-XBT

8" powered studio subwoofer

The CR8S-XBT subwoofer brings a tight, clean bass to your studio monitoring or home listening setup. This subwoofer is designed to meet the demands of modern musicians and content creators while offering Bluetooth connectivity for easy streaming

Feel the bass

Ready to upgrade your listening experience? With the Mackie CR8S-XBT subwoofer, you won't just hear the bass-you'll feel it too. The CR8S-XBT houses an 8" polypropylene-coated woofer within an all-wood sealed enclosure. The result? You get powerful bass reinforcement that delivers the bottom end you've been dreaming of.

Product features
Premium 8" Woofer and Wood Cabinet
Sleek, Brushed Metal Grille with Outlined Design Flexible I/O-1/4" TRS, RCA and Bluetooth
Included CRDV Desktop Volume Remote

Studio-quality sound

How else are you going to hear those deep 808s when you're mixing or listening to music? Adding the CX8S-XBT to your setup brings powerful low-end to your studio or home audio system. You'll know it when you feel it.

Sleek cosmetics

Sounding great is only half the battle-your multimedia monitors should reflect your style too. The sharp aesthetic of CR8S-XBT monitors looks great in the studio, the bedroom or any home listening setup. Be bold and make it loud without sacrificing style.

Bluetooth streaming

Effortlessly pair any Bluetooth-enabled device for easy streaming. We'll let you in on a secret. Paired with the CR8S-XBT, you can transform a set of regular CR-X monitors into Bluetooth monitors that you can pair with any compatible device. Has your dream come true yet?

Control it

All the control you need is always within reach. We include a CRDV desktop remote to give you control over the input and output levels of your subwoofer and stereo speakers. You'll never have to get up from your chair to adjust volume ever again.

Flexible inputs and outputs

In addition to Bluetooth connectivity, you can connect your subwoofer using TRS or RCA cables. This makes it easy to use your subwoofer in a studio or a home listening setup-the choice is all yours.

Wattage: 200W
Driver Size: 8"
Bluetooth: Yes

Notes: Intended for serious personal studios and professional music-production environments, the Erisr Pro Sub 10 helps you take charge of the low-frequency foundation of your mix. An ideal companion to Eris Pro- and Eris Studio-series reference monitors, the Eris Pro Sub 10 complements full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a natural sound.

Powerful and musical, the PreSonusr Eris Pro Sub 10 active, front-firing studio subwoofer is designed to deliver fast and accurate transient response, extending low frequencies down to 20 Hz, allowing you to hear the full-spectrum range of your mix. Driven by 170W (RMS) Class AB amplification, the Eris Pro Sub 10's 10-inch, glass-composite, low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors. A continuously variable lowpass filter (50 Hz to 130 Hz) allows you to create a seamless crossover transition between the full-range studio monitors and subwoofer for the most accurate listening environment possible.

Features

10-inch, front-firing, glass-composite, low-frequency transducer
Front-firing, bass-reflex acoustic port
Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
Left and right, balanced XLR and 14-inch TRS and unbalanced RCA main inputs
Left and right balanced XLR and 14-inch TRS outputs and XLR subwoofer output for connecting a second Eris Pro Sub 10

Versatile connectivity

Erisr Pro Sub 10 subwoofers provide the connections needed to act as the central hub for a basic monitoring setup, including left and right balanced XLR and 14-inch TRS and unbalanced RCA main inputs. Connect full-range monitors with left and right balanced XLR or 14-inch TRS outputs. An XLR subwoofer output lets you connect a second Pro Sub 10.

Seamless system integration

The Erisr Pro Sub 10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. A switchable highpass filter on the full-range outputs helps avoid frequency cancellation and reinforcement in the subwoofer's upper range, while a polarity-invert function ensures your system is in phase. A momentary footswitch (included) makes it easy to compare your mix with or without sub-bass frequencies.

Electronics
Voltage: 220-240V UK
Wattage: 250W Peak, 170W RMS

Performance
Peak SPL: 113 dB (@ 1 Meter)

Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Input Gain Range: -30 to +6 dB Low Pass Filter Control: 50 Hz to 130 Hz
Audio switches: Polarity Switch: 0 degrees or 180 degrees Ground Lift Switch: On/Off High Pass Filter Switch: On/Off Bypass Footswitch: On/Off
Monitor inputs: 2- Balanced XLR, 2- Balanced 1/4" TRS, 2- Unbalanced RCA
Power amplifier type: Class AB

Dimensions: 15.70 x 12.60 x 16.00 in
Weight: 37.00 lbs
Depth: 16" (40.6 cm)
Height: 15.75" (40 cm)
Width: 12.6" (32 cm)

Accessories
1-Button Footswitch Included

Notes: Great value sub from one of the rising brands in the studio monitor market. 10-inch speaker design reproduces frequencies all the way down to 20 Hz for precise monitoring of bass.

Supplier's notes:
To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The Temblor T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.

An ideal companion to Eris and Sceptre active reference monitors, the T10 complements full-range monitors without overshadowing them, extending the reach of your full-range system's low end with a musical and natural approach.
Powerful and musical, Temblor features high-quality components and design that enable it to deliver fast and accurate transient response, extending low frequencies without a hint of "tubbiness" or overshoot.

The Temblor T10 is an active subwoofer with a 10-inch glass-composite driver, built-in crossover, high-temperature voice coil, and damped rubber surround. Its cabinet features a front-firing, bass-reflex acoustic port and optimized, resonance-suppressing internal bracing. The enclosure has integrated rubber feet for stable placement.

In addition to outstanding accuracy and a frequency response that ranges from 20 Hz to 130 Hz, this combination of features enables the subwoofer to produce higher volume - up to 113 dB SPL - with less power than a sealed-box design. But make no mistake; the T10 has plenty of juice: 250 watts of Class AB power.

The result is a subwoofer that delivers accurate, tight low end and outperforms subs costing far more. With Temblor T10, you hear what the foundation of your mix really sounds like so you can produce your best mix from top to bottom.

The T10 provides more user controls than any other subwoofer in its class, enabling seamless integration into your listening environment.

The Temblor T10's extensive user controls include input gain (-30 dB to +6 dB, continuously variable) and a continuously variable low-pass filter (50 Hz to 130 Hz) that let you create a seamless crossover transition between your full-range studio monitors and subwoofer for a more accurate listening environment.

A switchable high-pass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors, avoiding destructive cancellation and reinforcement in the T10's upper range.
The result is a subwoofer that can be adjusted to perfectly complement not only our Sceptre CoActual and Eris active studio monitors but virtually any studio monitor.

The T10 also features a momentary footswitch (included) that bypasses the subwoofer, high-pass filter, and Sub Out. This allows your audio source signal to pass directly through the Temblor T10 to the full-range studio monitors, making comparing your mix with or without sub frequencies quick and easy. This helps to ensure your mix will sound good on a wide variety of systems.

Of course, we didn't forget the "small things" that can make a big difference: polarity invert and a ground-lift switch.

No other subwoofer anywhere close to the Temblor T10's price range offers a comparable selection of inputs and outputs.

The Temblor T10 provides a choice of three input pairs: two sets of balanced inputs (XLR and 1/4" TRS) and one pair of RCA unbalanced inputs. Pairs of inputs are provided in order to accept a stereo signal from your audio source.
When both of the balanced connections are in use, the TRS inputs will take precedence over the XLR inputs. The RCA inputs will sum into either balanced connection.

You get two pairs of balanced outputs: XLR and 1/4" TRS. The full-range signal connected to the stereo inputs on the T10 is passed through to these outputs so you can connect them to your main left and right studio monitors. If the High Pass Filter switch is engaged, frequencies below 80 Hz are not sent from these outputs.

The T10 also has a balanced XLR output that sends the low-frequency signal from the low-pass filter to a second Temblor T10 for the ultimate in smooth low end.

Notes: Ever since the 1970's the iconic white woofer and signature sound of Yamaha's nearfield reference monitors have become a genuine industry standard for a reason - their accuracy. Unlike studio monitors with added bass or treble frequencies which may sound more flattering at first, HS Series speakers were designed to give you the most honest, precise reference possible, providing an ideal sonic platform to build on throughout the mixing process.

By combining acquired knowledge and expertise with state-of-the-art sound technologies, Yamaha's speaker engineering team have examined, then optimized, every aspect that has contributed to making these monitors the most trusted in the business. The second generation HS Series also adds a new 6.5" model to the lineup, bringing its exceptional accuracy to an even greater variety of recording environments.

8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz
22Hz - 150Hz frequency response
High-power 150W amplifier exclusively designed for low frequencies
LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
XLR and TRS phone for inputs and XLR for outputs

Notes: The Theremini is a reimagination of one of the oldest electronic musical instruments, and Bob Moog's first love - the Theremin. Its design fuses the experience of playing an instrument you don't actually touch, with a powerful sound engine derived from Moog's award winning synthesizer, Animoog. The Theremini guarantees immediate success to anyone at any skill level or physical ability, while also providing new ways to experiment with music, education, and gestural control.

Assistive pitch correction allows each player to adjust the instrument's level of playing difficulty. When activated the Theremini will play every note in a selected scale perfectly, making it impossible to play a wrong note. As the assistive pitch correction is decreased, more expressive control of pitch and vibrato becomes possible. When deactivated, the Theremini will perform as a traditional Theremin and there is absolutely no pitch correction.

A built-in tuner supplies real-time visual feedback of each note as it is played, as well as its proximity to perfection. This is useful for correcting a user's playing position, and for educating younger players about pitch and scales.

The Presets section of the Theremini allows you to select from 32 wave or wavetable-based presets, store a selected scale, set and recall a specified playing range, and specify settings for the included stereo delay and more.

Recessed in the top of the Theremini is a compact speaker perfect for private rehearsal and quick setup anywhere. Silent rehearsal is also possible via the front panel headphone jack. Simply plug in ear-buds or headphones and the built-in speaker becomes silent.

For live performance and gestural control, the rear panel of the Theremini features stereo line level audio outputs, a Pitch CV output with selectable range, and a mini USB jack for MIDI connectivity to the free Theremini Mac / Windows software editor and Theremini iPad editor.

Specifications

Pitch detection: Heterodyning analogue oscillator
Synthesis engine: Animoog-derived wavetable
Presets: 32
Display: 128 x 64 pixel backlit LCD
Internal speaker: 2-inch, full-range
Headphone jack: 1/8" (3.5mm) TRS headphone jack
Audio outputs: 1/4"TS Mono/Stereo; Line Level

Notes: MoCo is a fully passive monitor controller that helps you to provide perfect control over the playback volume of your studio monitors.

"Fully passive" means that there are no active components involved, that could in any way alter the audio signal - keeping the maximum sound quality level for your studio monitors. MoCo provides two separate stereo inputs (one with balanced 1/4" TRS connectors, one with both unbalanced RCA and unbalanced 1/8" TRS connectors) and two separate stereo outputs (one with balanced XLR connectors, one with balanced / unbalanced 1/4" TRS plus unbalanced 1/8" TRS connectors). MoCo does not change your signals from unbalanced to balanced: what goes in, goes out!

Via one switch you can select the input signal and with separate buttons, each output can be enabled. Also there is a switch that changes the monitor signal to mono and you can mute the playback audio signal quickly at the touch of a button. A quick swap of the left and right audio signal channels is also possible. And of course, the stylish big knob in the center of MoCo controls the actual playback volume.

Features/specifications

2x mono balanced 1/4" TRS input (input A)
2x mono unbalanced RCA input (input B)
1x stereo unbalanced 1/8" mini jack input (input B)
2x mono balanced XLR output (output A)
2x mono balanced / unbalanced 1/4" TRS output (output B)
1x stereo unbalanced 1/8" mini jack output (output B)
Selected high quality potentiometer for passive volume control
A/B input selection switch
L/R switch to swap left & right audio channels
Independent A and B buttons to enable and disable the outputs
Mono downmix button (mixes left to right channel and right to left channel)
Mute button to mute output signal instantly
Approx. dimensions: 164 mm (length), 130 mm (width), 55 mm (height)

Notes: With a Fostex PC-1e(B), you can remotely control the volume of both left and right speakers which makes it a great addition for music and video playback on a PC. It is compact for desktop use.

The passive type Fostex PC-1e(B) volume controller features a robust metal chassis and machined aluminum knob. It does not need a battery to power. It also comes with a stereo mini cable (80cm) and 2 RCA pin cable (100cm).

Notes: With a Fostex PC-1e(W), you can remotely control the volume of both left and right speakers which makes it a great addition for music and video playback on a PC. It is compact for desktop use.

The passive type PC-1e(W) volume controller features a robust metal chassis and machined aluminum knob. It does not need battery to power. It also comes with a stereo mini cable (80cm) and 2 RCA pin cable (100cm).

Notes: The Mackie Big Knob Passive Monitor Controller is the perfect addition to any studio, delivering professional source/monitor selection and precise level control that made the original Big Knob such a popular choice. Featuring an intuitive layout, the Big Knob monitor controller features balanced/unbalanced 1/4'' jack L/R source inputs, along with 1/4'' jack L/R mono outputs.

Notes: The Ultimate CUBE Bass Experience for Home and Beyond

For over four decades, CUBE amplifiers have brought exceptional value to musicians everywhere, offering great sound and versatile features in portable, go-everywhere designs. The DUAL CUBE BASS LX is the most advanced compact CUBE bass amp yet, filled with evolved BOSS technologies for the ultimate home practice experience. This thunder box punches well above its size, delivering rich, full sound and a host of fun rhythm patterns to groove with. A generous array of connectivity options are also included, extending its range to performing, recording, and many other applications.

Stage Sound at Home

With its custom stereo speaker system and advanced cabinet design, the DUAL CUBE BASS LX delivers big, refined tones that you won't believe are coming from such a small amp. Five different preamp types are available, offering uncoloured sounds for studio and slap playing, vintage sounds for classic styles, and aggressive modern tones for heavy genres. With natural feel and organic response honed with decades of BOSS amp development, you have an endlessly inspiring platform to hone skills and explore new techniques.

Find Your Voice

The DUAL CUBE BASS LX features a variety of bass-tuned effects, including many with expansive stereo sound. Shape your core tone with compression or drive, add colour with touch wah, flanger, or chorus, and bring in spatial depth with delay or reverb. Each amp type includes three user memories, allowing you to store gain, EQ, and effect setups for quick recall. The DUAL CUBE BASS LX Editor lets you dive even deeper, providing access to effect variations and detailed parameter tweaks from your Mac or Windows computer.

Get in the Groove

Make your practice sessions more fun and productive with the powerful onboard Rhythm Guide. There are nine rhythm types with three pattern variations each, spanning from a basic metronome to realistic drum grooves in rock, jazz, metal, Latin, and other styles. Using the DUAL CUBE BASS LX Editor, you can explore a total of 91 rhythm variations and save your favorites in the amp. With the high-performance stereo speakers, rhythms and backing music are presented in full-range detail for a rich, immersive experience.

Beyond the Bedroom

Thanks to its ultra-flexible connectivity, the DUAL CUBE BASS LX goes far beyond the capabilities of other compact amps. Use the stereo XLR line output to directly connect to a PA system and perform on stage. Or capture mix-ready sounds in music software on a computer or mobile device via USB or i-CUBE-Link. If you like to livestream, you can capture your voice with a headphones mic and send it to the USB and i-CUBE Link outputs along with your bass sound. And with the ability to use AC or battery power, you can play absolutely anywhere.

Expand Your Possibilities

With optional FS-series footswitches, you can operate the Rhythm Guide hands free and unlock access to the onboard looper to create layered performances. And by connecting the optional Bluetoothr Audio MIDI Dual Adaptor, you can go even further with a smartphone or tablet. Wirelessly stream music from your device and jam along, or use the iOS/Android version of the DUAL CUBE BASS LX Editor to tweak functions remotely. Or pair the EV-1-WL Wireless MIDI Expression Pedal for cable-free operation of wah and volume.

Standard Features
Ultra-portable stereo bass amplifier with professional sound and features
Two custom-designed 5-inch speakers
10-watt stereo power amp (5 watts x 2)
Five preamp types: Super Flat, Flat, Vintage, Modern, and Rock
Compressor/drive control tuned for bass
Chorus, flanger, touch wah, delay, and reverb effects
Three-band equalizer
Store amp and effects settings in 15 memories (3 memories for each amp type)
Powered via AC adaptor (included) or eight AA batteries
Onboard rhythms with 27 different patterns (nine types and three variations each)
Edit sounds, access additional rhythm variations, and more with the dedicated DUAL CUBE BASS LX Editor
Stereo XLR balanced line output
Phones/Rec jack with support for an inline headphones microphone
USB audio for direct recording and livestreaming
Control jack for up to two external footswitches
i-CUBE Link/Aux In jack for audio playback
Selectable Loopback function for USB and i-CUBE Link/Aux In
Onboard looper (requires optional footswitch)
Connector for optional Bluetoothr Audio MIDI Dual Adaptor (BT-DUAL)


Specifications

Rated Power Output: 10 W (5 W+5 W)
Nominal Input Level: INPUT: -10 dBu (1 M ohm), i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level: LINE OUT L, R: -10 dBu
Speakers: 12 cm (5 inches) x 2
Controls: POWER switch, COMP/DRIVE knob, DRIVE button, AMP TYPE knob (SUPER FLAT, FLAT, VINTAGE, MODERN, ROCK), MEMORY button, GAIN knob, VOLUME knob, BASS knob, MIDDLE knob TREBLE knob, EFFECTS knob (CHORUS, FLANGER, T-WAH), DELAY/REVERB knob, START/STOP button, PATTERN knob (METRONOME, JAZZ, ROCK, BLUES, R&B, FUNK, METAL, LATIN, COUNTRY), VARIATION button, TAP TEMPO button, VOLUME knob (RHYTHM GUIDE), MIC VOL knob, MASTER knob, LOOPBACK switch (i-CUBE LINK/AUX IN), LOOPBACK switch (USB)
Indicators: POWER, DRIVE, MEMORY, START/STOP, VARIATION, REC, PLAY, DUB

Connectors:
INPUT jack: 1/4-inch phone type
PHONES/REC OUT jack: Stereo Miniature phone type (Stereo, CTIA)
i-CUBE LINK/AUX IN jack: Stereo Miniature phone type (Stereo, CTIA)
LINE OUT L, R connectors: XLR type
FOOT SW jack: 1/4-inch TRS phone type
Bluetooth ADAPTOR connector: Dedicated connector
USB port: USB B
DC IN jack
Power Supply: AC adapter (DC 9 V), Alkaline battery (AA, LR6) x 8, Rechargeable Ni-MH battery (AA, HR6) x 8Current Draw370 mA
Expected battery life under continuous use: Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)

*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.

Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adapter, Power cord, Mini cable (4-pole miniature phone type)

Options (sold separately):
Footswitch: FS-5U, FS-6, FS-7
Bluetoothr Audio MIDI Dual Adaptor (MODEL BT-DUAL)
Wireless MIDI Expression Pedal: EV-1-WL

Size & weight
Width: 341 mm / 13-7/16 inches
Depth: 205 mm / 8-1/8 inches
Height: 261 mm / 10-5/16 inches
Weight (excluding AC adaptor): 4.4 kg / 9 lbs 12 oz

Notes: Crafted with the breakthrough design philosophy behind the acclaimed Katana guitar amp series, the Katana-110 Bass delivers premium sound and advanced features perfectly tuned for the needs of serious bassists. Three unique amp characters and onboard BOSS effects provide a wide range of tones, backed by a stage-ready, 110-watt class AB power amp, custom 10-inch woofer, and tweeter with on/off switch. And with comprehensive EQ, flexible connectivity, and more, the Katana-110 Bass is ready to take on any playing situation, from stage to studio to everyday practice at home.

Refined Tone And Authoritative Power

The Katana-110 Bass brings you high-performance amplification fuelled by decades of BOSS knowledge and expertise. Armed with 110 watts of time-tested class AB power, this gig-ready amp provides big volume, punch, and presence and smooth, natural drive as you turn up the gain. Three unique preamp types are also available-each with a powerful three-way Shape switch to fine-tune the character-so you'll always have the perfect sound for any style or genre.

Vintage-A classic tube voice with organic tone and natural drive.
Flat-Smooth, clear, and dynamic tone with rich harmonic character.
Modern-Quick dynamic response with extended bass range.

Command The Stage

With its custom-designed speaker system and rock-solid combo cabinet, the Katana-110 Bass produces a commanding voice to drive your band in any musical situation. The fundamental tone of the 10-inch woofer is complemented with a tweeter for high-frequency definition that's ideal for slap and other modern playing styles. Our efficient bi-amp design delivers clear and balanced sound, and the tweeter can be turned off with a panel switch for a more traditional bass tone if desired.

Four Independent Effects Sections

The Katana series is famous for its onboard BOSS effects, and the Katana-110 Bass is no exception. Dedicated comp/limiter and drive sections provide core processing, while FX1 and FX2 offer a treasure trove of options from the BOSS bass effects library, from standards like chorus and flanger to octave, bass synth, and more. The FX2 section also includes delay and reverb, and over 60 total effect types are available for loading via the BOSS Tone Studio editor.

Precision Sound-Crafting Tools

With the intuitive panel controls on the Katana-110 Bass, you can quickly refine your tone in detail. The studio-inspired Blend section lets you mix in some dry signal, which you can pre-shape from the panel with three customizable settings for the optimum tonal fusion. A comprehensive four-band EQ is also on hand, complete with three selectable frequency centres in the low-mid and high-mid bands.

Rich Performance Versatility

The flexible Katana-110 Bass is your perfect partner for any live gig. Six Tone Setting memories are available for storing and recalling the sounds you create, including preamp type, EQ, Blend, and effect settings. You can switch memories from the panel and go even further with optional footswitches, an expression pedal, and the GA-FC Foot Controller. There's also a balanced XLR output for connecting to a house PA, along with a switch to select between direct, pre, or post signals.

Recording And Practice Powerhouse

The Katana-110 Bass is equally suited for studio recording and home playing. The compact footprint takes up minimal space, and the variable Power Control lets you dial up cranked-amp tones at family-friendly volume levels. A headphones/recording jack provides a direct output with effects and mic'd cab emulation with three Air Feel settings, while USB lets you interface with computer production software and track with great tone.

Specifications
Output Power: 60 W continuous (RMS), 110 W peak
Nominal Input Level: INPUT: -10 dBu (1 M ohm), POWER AMP IN: -10 dBu (20 k ohms), AUX IN: -10 dBu (20 k ohms), RETURN IN: -10 dBu (100 k ohm)
Speaker:
WOOFER: 25 cm (10 inches) x 1
TWEETER: x 1
Controls: POWER switch, MASTER VOLUME knob, POWER CONTROL switch (STANDBY, 1 W, MAX), TWEETER button

[INPUT EFX]: COMP button, DRIVE button, COMP knob, DRIVE knob

[AMPLIFIER]: PAD button, SHAPE button, TYPE knob (VINTAGE, FLAT, MODERN), GAIN knob, VOLUME knob

[BLEND]: BLEND button, DRY LEVEL knob

[EQUALIZER]: LOW MID button, HIGH MID button, BASS knob, LOW MID knob, HIGH MID knob, TREBLE knob

[EFFECTS]: FX1 button, FX2 button, TAP button, FX1 knob, FX2 knob

[TONE SETTING]: CH1 button, CH2 button, CH3 button, PANEL button

[BALANCED OUT]: GND LIFT switch (OFF, ON), SELECT (POST, PRE, DIRECT)
Indicators: COMP, DRIVE, PAD, SHAPE, BLEND, LOW MID, HIGH MID, FX1, FX2, TAP, CH1, CH2, CH3, PANEL, TWEETER

Connectors:
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
BALANCED OUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
GA-FC jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
BLUETOOTH ADAPTOR SLOT: Bluetooth Audio MIDI Dual Adaptor
AC IN jack
Power Consumption: 77 W
Accessories: Owner's manual, Power cord, GA-FC sticker

Options (sold separately): Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
GA FOOT CONTROLLER (GA-FC)
Bluetooth Audio MIDI Dual Adaptor (Model BT-DUAL)

Size & weight
Width: 470 mm / 18-9/16 inches
Depth: 300 mm / 11-13/16 inches
Height: 500 mm / 19-11/16 inches
Weight: 16.8 kg / 37 lbs 0.6 oz

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead

Notes: The Wireless ME TX is an ultra-compact wireless transmitter that makes recording professional audio for your videos effortless - perfect for expanding a RODE Series IV wireless system. It features both a 3.5mm TRS input for connecting external microphones like lavaliers or VideoMics, along with a built in omnidirectional mic, and thanks to the intelligent GainAssist technology, you can simply clip it onto your subject to be recording crystal-clear wireless audio in seconds.

Note: This product requires a RODE Series IV RX (receiver) to operate, such as the Wireless ME RX, Wireless GO II RX, RODECaster Pro II, RODECaster Duo or Streamer X.

Simple-to-use wireless transmitter for the RODE Series IV wireless system
Series IV 2.4 GHz digital transmission for crystal-clear recording with over 100m range
Intelligent GainAssist technology automatically adjusts volume levels on-the-fly
High-quality, built-in omnidirectional microphone
3.5mm TRS input for connecting external lavalier microphones or VideoMics
In-built rechargeable lithium-ion battery - up to 7 hours battery life
Requires a RODE Series IV receiver to operate (including Wireless ME RX, Wireless GO II RX, RODECaster Pro II, RODECaster Duo or Streamer X)

Acoustic & electrical specifications

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 50Hz - 20kHz
Frequency Response:50 Hz - 20 kHz +/-3 dB
Maximum Input Level (3.5mm): 0 Gain 96.8dB
Microphone Preamp Gain: 0 Gain 118.0dBSPL per IEC 60268
Equivalent Noise (dBA): 0 Gain 17.7dBA, 50 Gain 18.3dBA, 75 Gain 19.7dBA, 100 Gain 19.9dBA
Analogue Inputs: TRS (Lavalier Microphone Input)
Analogue Outputs: TRS
Input Impedance: 2.2kO
Output Impedance:100O
Output Connection: 3.5mm headphone jack, USB-C
Computer Connectivity: USB-C (USB 2.0)
Form Factor: USB-C Broadcast Microphone
Power Requirements:5V @ 500mA (USB Bus Power)
Number of Preamps: One (1)Bit
Depth: 24-bit
Sample Rate:48 kHz

Operating Systems Requirements:

macOS 10.11 above, Windows 7 and above
iOS: iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air (3rd generation), iPad Air 2, iPad Air, iPad mini (5th generation), iPad mini 4, iPad mini 3, iPad mini 2, iPad (7th generation), iPad (6th generation), iPad (5th generation), iPod touch (7th generation), iPod touch (6th generation)
Android: Samsung S10+, Samsung A20, Samsung A51, Nokia 5.1, Nokia 8.1, Google Pixel 3a, Moto G7 Power
Power Requirements: Inbuilt Rechargeable Lithium-ion Battery Charged Via USB5V, 0.3A
Operating Time: 7 Hours
Transmission Range: 200m Line of sight

Mechanical specifications

Weight: 32g
Length: 44mm
Width: 45.3mm
Height: 18.3mm

Included Accessories:2 x Furry Windshields1 x SC22, 30cm USB-C to USB-C cable
RODE Software Compatibility: RODE Central, RODE Connect, RODE Reporter, RODE Capture

What's in the box

Wireless ME Transmitter Transmitter (TX)
Furry Windshields
SC22

Notes: The Wireless ME is an ultra-compact wireless microphone system targeted towards a more entry-level consumer audience.

With intelligent GainAssist technology that automatically controls audio levels, auto-paired RX and TX out of the box, seamless compatibility with cameras, smartphones and computers (cables included), and microphones built into both the transmitter and receiver, the Wireless ME makes capturing crystal-clear wireless audio in a wide range of content creation applications incredibly easy.

Harness the Freedom of Wireless

The Wireless ME utilises RODE's state-of-the-art Series IV 2.4 GHz digital transmission with 128-bit encryption to deliver incredibly stable wireless audio at a range of over 100m. Simply connect the receiver to your camera, smartphone or computer, attach the transmitter to you or your talent and hit record to capture pristine audio for your content - hands-free, no wires!

Get Recording in Seconds

With the Wireless ME, you can be recording pristine audio in seconds. The transmitter and receiver are automatically paired out of the box, and with in-built microphones, convenient clips for attaching to clothing or your camera, and all necessary cables included, you can start creating right away.

Perfect Audio, Every Time

The Wireless ME features broadcast-grade omnidirectional microphones for capturing high-quality sound for your videos. It also features our groundbreaking GainAssist technology to make capturing crystal-clear audio easier than ever before.AThis utilises intelligent algorithms in the Wireless ME's audio processor that automatically control your audio levels to ensure they are perfectly balanced and to prevent your audio from clipping.

Wireless You and Wireless ME

The Wireless ME is the first wireless microphone to feature microphones built into both the transmitter and receiver, allowing you to capture audio from in front of and behind the camera - ideal for recording everything from two-way interviews to voice overs for video content.

Pro Audio, Pocket-sized

Its convenient in-built clip design allows it to be attached to clothing and mounted onto your camera with ease, no extra gear required. The ultimate grab-and-go microphone.

Everything You Need to Start Recording

The Wireless ME comes with everything you need to start recording right away. This includes four cables for connecting to phones, tablets, cameras, computers and more, as well as two furry windshields for recording outdoors and in windy conditions. It also comes with a handy pouch for safely storing your Wireless ME.

Specifications

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Dynamic Range: 100dB
Max SPL: 122dB SPL
Equivalent Noise (dBA): 22dBA
Analogue Inputs: TRS (lavalier microphone Input)
Output Connection: 3.5mm TRS USB-C
Computer Connectivity: USB-C
Bit Depth: 24-bit
Sample Rate: 48 kHz

Minimum Operating Systems Requirements

macOS 10.15 above
Windows 10 and above
iOS 14
Android 11

Power Requirements: In-built rechargeable lithium-ion battery charged via 5V USB

Operating Time: 7 hours

Transmission Range: 100m

Mechanical Specifications
Weight (grams)
TX 32
RX 32

Weight (grams): TX 32 RX 32

Dimensions (millimetres)
TX: 44mm x 45.3mm x 18.3mm
RX: 44mm x 45.3mm x 18.3mm

Box contains:

1 x Receiver, 1 x Transmitter
1 x USB-C to Lightning cable (SC21)
1 x USB-C to USB-C cable (SC22)
1 x 3.5mm TRS to TRS cable (SC2)
1 x 3.5mm TRS to TRRS cable (SC7)
2 x Furry Windshields
1 x Carry Pouch

Notes: The Wireless PRO is the ultimate wireless microphone, packed full of powerful features that offer incredible flexibility for recording pristine audio for your content. Never lose a take with 32-bit float on-board recording, keep all your video and audio flawlessly synchronised with timecode, and capture incredible-sounding content effortlessly with intelligent GainAssist technology. The Wireless PRO delivers everything you could possibly want from a compact wireless microphone system, and much more.

State-of-the-art Wireless Audio

RODE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.

Never Lose a Recording

There's nothing worse than pulling your audio into your editing software and realising your recording clipped and can't be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.

Audio and Video, Perfectly in Sync

With the Wireless PRO's timecode capability, you can perfectly synchronise your audio and video with ease - no need for complex and expensive external timecode systems.

Pristine Audio in Any Situation

In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.

The Ultimate Pro Recording Kit
The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are perfect for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips.

Connect to All Your Devices

Thanks to its analogue (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers.

Easy Configuration and Control

Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere using your computer or smartphone with the RODE Central app. Complete control over your setup, so you can be ready for any recording situation.

Monitor and Record

Monitor your audio in the field with the Wireless PRO's high-power headphone output, complete with on-board level control, or connect a headset or narrator microphone such as a lavalier to capture a third audio track. Ultimate versatility.
Specifications Acoustic & Electrical (Wireless PRO)

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dB SPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5m TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 10.15 above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Acoustic & Electrical (Charge Case)
Mechanical
Battery Capacity: 4200 mAH
Power Requirements: 5V/3A via USB-C
Charging Time: 2.5 hours
Charge Current: 2A (maximum)
Total charges (TXs and RX): 2 complete charges
Connection Type: USB-C (SuperSpeed USB-C cable required for optimal data transfer speeds)

Mechanical
Weight (grams)
TX: 35RX: 36
Charge Case: 177
Total: 284

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
Charge Case: 101 (W) x 82 (L) x 70 (D)

What's in the Box:

Wireless PRO TX
2 x Transmitter
30cm USB-C Lightning Cable
1 x SC21
30cm USB-C to USB-C Cable
1 x SC22
Premium Lavalier Microphone
2 x Lavalier II
Magnetic Clip for Wireless GO
2 x MagClip GO
Furry for the Wireless Go II
3 x Furry
Wireless PRO Receiver
1 x Receiver
Wireless PRO Charge Case
1 x Charge Case (PRO)
Wireless PRO Accessory Case
1 x Accessory Case
SC34 USB-C to C SuperSpeed Cable
1 x SC34
3.5mm TRS Patch Cable
1 x SC2

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Wireless PRO is the ultimate wireless microphone, packed full of powerful features that offer incredible flexibility for recording pristine audio for your content. Never lose a take with 32-bit float on-board recording, keep all your video and audio flawlessly synchronised with timecode, and capture incredible-sounding content effortlessly with intelligent GainAssist technology. The Wireless PRO delivers everything you could possibly want from a compact wireless microphone system, and much more.

State-of-the-art Wireless Audio

RODE pioneered the ultra-compact wireless microphone category with the original Wireless GO and this legacy carries on with Wireless PRO. Utilising state-of-the-art Series IV 2.4GHz digital transmission and proprietary near-zero latency codec with 128-bit encryption, it delivers crystal-clear, incredibly stable audio with a range of up to 260m. Wireless audio you can rely on in almost any recording application.

Never Lose a Recording

There's nothing worse than pulling your audio into your editing software and realising your recording clipped and can't be used. With the Wireless PRO, this is a thing of the past. 32-bit float on-board recording means your audio is safely backed up every time you record, with the ability to recover any recording in post-production that was too loud or too quiet. Never worry about setting your gain perfectly again. Gamechanger.

Audio and Video, Perfectly in Sync

With the Wireless PRO's timecode capability, you can perfectly synchronise your audio and video with ease - no need for complex and expensive external timecode systems.

Pristine Audio in Any Situation

In addition to its 32-bit float on-board recording, the Wireless PRO offers a plethora of features that promise pristine audio in any situation. Ensure your audio is smooth and balanced with intelligent GainAssist technology. Precisely match your mic to your camera with flexible gain controls and tailored presets. Add an extra layer of protection with the safety channel. Perfect recordings, every time.

The Ultimate Pro Recording Kit
The Wireless PRO comes with everything you need to get set up and recording wireless audio right out of the box. Included are two professional Lavalier II microphones that are perfect for recording on-screen talent, as well as furry windshields for outdoor use, a pair of MagClip GO to attach your transmitters anywhere, a smart charging case and a handy accessory pack to store your lavs, cables and clips.

Connect to All Your Devices

Thanks to its analogue (3.5mm) and digital (USB-C) outputs, the Wireless PRO is universally compatible with cameras and other audio devices, both iOS and Android smartphones and tablets, and Windows and Mac computers.

Easy Configuration and Control

Check your audio levels at a glance with the bright LCD display and configure settings on the fly with dedicated controls for everything from gain adjustment to triggering recordings. Customise the system to your needs anywhere using your computer or smartphone with the RODE Central app. Complete control over your setup, so you can be ready for any recording situation.

Monitor and Record

Monitor your audio in the field with the Wireless PRO's high-power headphone output, complete with on-board level control, or connect a headset or narrator microphone such as a lavalier to capture a third audio track. Ultimate versatility.
Specifications Acoustic & Electrical (Wireless PRO)

Acoustic Principle: Pre-polarised pressure transducer
Polar Pattern: Omnidirectional
Frequency Range: 20 Hz - 20 kHz
Maximum SPL: 123.5 dB SPL
Equivalent Noise (A-Weighted): 22 dBA
Signal-to-noise Ratio: 72 dB
Analogue Inputs: 3.5mm locking TRS (TX)
Analogue Outputs: 3.5m TRRS (RX)
Transmission Range: 260m (line of sight)
Digital Connectivity: USB-C
Operating System Requirements: macOS 10.15 above, Windows 10 and above, iOS 14 and above, Android 11 and above
Power Requirements: In-built rechargeable lithium-ion battery, charged via USB-C (5V, 0.4A)
Operating Time: Up to 7 hours

Acoustic & Electrical (Charge Case)
Mechanical
Battery Capacity: 4200 mAH
Power Requirements: 5V/3A via USB-C
Charging Time: 2.5 hours
Charge Current: 2A (maximum)
Total charges (TXs and RX): 2 complete charges
Connection Type: USB-C (SuperSpeed USB-C cable required for optimal data transfer speeds)

Mechanical
Weight (grams)
TX: 35RX: 36
Charge Case: 177
Total: 284

Dimensions (millimetres)
TX: 46.5 (W) x 44 (L) x 20 (H)
Charge Case: 101 (W) x 82 (L) x 70 (D)

What's in the Box:

Wireless PRO TX
2 x Transmitter
30cm USB-C Lightning Cable
1 x SC21
30cm USB-C to USB-C Cable
1 x SC22
Premium Lavalier Microphone
2 x Lavalier II
Magnetic Clip for Wireless GO
2 x MagClip GO
Furry for the Wireless Go II
3 x Furry
Wireless PRO Receiver
1 x Receiver
Wireless PRO Charge Case
1 x Charge Case (PRO)
Wireless PRO Accessory Case
1 x Accessory Case
SC34 USB-C to C SuperSpeed Cable
1 x SC34
3.5mm TRS Patch Cable
1 x SC2

Notes: Be Heard Anywhere

Wherever you perform, high-quality sound with great projection is essential to capture listeners and stand out from the pack. With the portable CUBE Street II by your side, you have the tools you need to deliver your message with confidence in any mobile setting, from musical performances on the street to public speaking events.

Evolved from the best-selling Roland CUBE Street-and newly rebranded with the BOSS name-this battery-driven powerhouse provides rich stereo sound for busking and other mobile gigs. Dual channels allow you to plug in mics and instruments and sound great immediately, with no extra gear to carry around. A vocal harmony function, looper, and effects are also on hand to lift your performances and impress the crowd. And with the optional Bluetoothr Audio MIDI Dual Adaptor (BT-DUAL), you can wirelessly stream backing tracks and control CUBE Street II functions from your phone or tablet.

Travel Light with Powerful Sound

Compared with its popular predecessor, CUBE Street II is even lighter and more durable thanks to its modern ABS injection-moulded design. The output power has been doubled too, giving you 10 total watts of crisp and clean stereo sound to cut through street traffic, train arrivals, and other noise challenges on the gig. In quieter situations where you don't need as much headroom, kicking in Eco mode reduces the power to extend battery life.

All the Connectivity You Need

With two ultra-versatile input channels, CUBE Street II supports all types of musicians and performers. The Mic/Instrument channel features a combo jack for either an XLR balanced mic or an instrument such as a keyboard or Roland's Aerophone. Equipped with a standard 14-inch jack, the Guitar/Mic channel provides plug-and-play sound for guitarists with seven acoustic and electric amp types, as well as settings for a line-level instrument or unbalanced mic. And if you ever need to expand your sonic reach, dedicated outputs are available for connecting to a house PA or another CUBE Street II.

Make Your Performances Shine

CUBE Street II is packed with features to enhance your sound and bring fresh energy to shows. Each channel provides dedicated three-band EQ and reverb, and there's a chorus/delay effect on the Guitar/Mic channel. The harmony function on the Mic/Instrument channel creates impressive vocal harmonies that will make audiences wonder where the background singers are hiding. Harmonies are produced as you sing based on the guitar chords you play or a key you set, and you can bring them in and out as needed with an optional footswitch. There's a built-in looper too, providing a powerful and fun way to create backing tracks on the spot.

From the Street to the World

CUBE Street II helps you reach both in-person and global audiences at the same time. Via i-CUBE Link and USB, you can send the amp's audio output to video, livestreaming, or music production apps for on-the-spot capture. The i-CUBE Link jack provides a mono output and connects to most phones and tablets with the included cable, while USB supports a stereo digital connection to a computer or an iOS device.*

*An Apple adaptor may be required to connect an iOS device to the CUBE Street II via i-CUBE Link or USB.

A Grab-and-Go PA for Everyone

While designed with performing musicians in mind, CUBE Street II excels in any situation that requires high-quality sound. It's easy to move and sets up anywhere, making it perfect for speaking in presentations, workshops, and school events. And with the ability to play music as well-either wired through the aux input or wirelessly with the optional Bluetoothr Audio MIDI Dual Adaptor (BT-DUAL) -CUBE Street II is ideal for background entertainment and impromptu karaoke performances.

Specifications

Rated Power Output: 10 W (5 W + 5 W)
Nominal Input Level: MIC/INSTRUMENT INPUT: -40 dBu (2 k ohm)/-20 dBu (11 k ohm), GUITAR/MIC INPUT:-10 dBu(1 M ohm), i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level: LINE OUT : -10 dBu (MONO)
Speakers: 16 cm (6.5 inches) x 2

Controls: POWER switch, OUTPUT POWER switch (MAX, ECO), LOOPER button, STOP button

[MIC/INSTRUMENT]: SELECT switch (MIC, INST), VOLUME knob, HARMONY knob, KEY button, BASS knob, MIDDLE knob, TREBLE knob, REVERB knob

[TUNER]: TUNER button

[GUITAR/MIC]: AMP TYPE knob (NORMAL, BRIGHT, WIDE, INSTRUMENT, CLEAN, CRUNCH, LEAD, ACOUSTIC SIM, MIC), GAIN knob, VOLUME knob, BASS knob, MIDDLE knob, TREBLE knob, CHORUS/DELAY knob (CHORUS, DELAY) REVERB knob, [i-CUBE LINK/AUX IN], i-CUBE LINK/AUX IN knob

Indicators: POWER, TUNER, KEY, REC, PLAY

Connectors

[INPUT]: MIC/INSTRUMENT jack: Combo type (XLR type, 1/4-inch TRS phone type), balanced; GUITAR/MIC jack: 1/4-inch phone type; i-CUBE LINK/AUX IN jack: 4-pole miniature phone type

[OUTPUT] LINE OUT jack: 1/4-inch phone type; PHONES/REC OUT jack: Stereo miniature phone type

[FOOT SW]: SW 1 HARMONY/MIC/INST jack: 1/4-inch TRS phone type, SW 2 LOOPER/GUITAR/MIC jack: 1/4-inch TRS phone type

Bluetooth ADAPTOR connector: Dedicated connector
USB port: USB B type
DC IN jack

Power Supply
AC adaptor (DC 9 V)
Alkaline battery (AA, LR6) x 8
Rechargeable Ni-MH battery (AA, HR6) x 8

Current Draw: 390 mA

Expected battery life under continuous use:

[OUTPUT POWER switch: MAX (Maximum power output: 10 W)]
Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)

[OUTPUT POWER switch: ECO (Maximum power output: 5 W)]
Alkaline battery: Approximately 11 hours
Rechargeable Ni-MH battery: Approximately 14 hours (*1)

*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.

Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adaptor, Power cord, Mini cable (4-pole miniature phone type)

Options (sold separately):
Bluetoothr Audio MIDI Dual Adaptor: BT-DUAL
Carrying case: CB-CS1
Footswitch: FS-5U, FS-6, FS-7

Size & weight

Width: 414 mm / 16-5/16 inches
Depth: 285 mm / 11-1/4 inches
Height: 255 mm / 10-1/16 inches
Weight (excluding AC adaptor): 4.4 kg / 9 lbs 12 oz

Notes: Customizable tones for jamming and practice

With its impressive sound, built-in effects, and the ability to swap COSM amp types via a free app for iOS and Android devices, the CUBE-10GX is the perfect small amp for jamming, bedroom practice, and recording. Built to the respected CUBE standard, the CUBE-10GX delivers big, full tones with its custom 8-inch speaker and heavy-duty cabinet design. Clean, Crunch, and Lead amp types come ready to play from the factory, but you can easily switch them out from your favourite mobile device. The CUBE KIT app includes multiple amps to choose from, including vintage classics, ultra-heavy gain machines, and even amps for bass and acoustic-electric guitar. The compact CUBE-10GX also includes options for shaping your tones even further with three-band EQ and onboard chorus, delay, and reverb effects.

Big Sound, Compact Package

Packing versatile amp sounds, simple-yet-powerful tone controls, and high-calibre effects, the CUBE-10GX is ideal for both beginning guitarists and experienced players looking for a great sounding small amp. Renowned CUBE construction quality provides rich, full sound and maximum durability, with a custom-designed 8-inch speaker, ultra-rigid cabinetry, heavy-duty corner protectors, and more. From bedroom practice to jamming with friends to tracking in the studio, the CUBE-10GX delivers top-shelf guitar tones wherever you play.

Easily Customize Amp Types from Your Smart Phone or Tablet

Out of the box, the CUBE-10GX comes ready to rock with Clean, Crunch, and Lead COSM amp types. But that's just where the fun starts-using the CUBE KIT app for iOS and Android devices, you can load up those three slots with a variety of different amp types and adapt the sound of the CUBE-10GX for the music you like to play! Available as a free download, CUBE KIT includes seven additional COSM amp types to cover any style, from jazz to classic rock to high-gain metal. For enhanced versatility, there are even amp types designed for bass and acoustic-electric guitar. Simple and intuitive to use, CUBE KIT makes it easy to customize the CUBE-10GX's sound in seconds.

Three-Band EQ, Built-in Effects, and More

The CUBE-10GX is equipped with Bass, Middle, and Treble controls for fine-tuning your tone, plus three high-quality effects. Chorus, delay, or reverb can be dialled up easily with a single intuitive knob, and the reverb section offers plate and retro spring variations for a wide range of sound. Via the rear-panel Aux In jack, you can plug in a music player or smart phone and riff along with your favourite tunes. There's also a Rec Out/Phones jack, which mutes the onboard speaker and provides a direct output complete with COSM speaker modeling. This is a great feature for quiet practice with headphones, and also for tracking the CUBE-10GX's pro COSM tones directly into your favourite recording devices.

Specifications

Maximum Power Output: 10 W
Nominal Input Level (1kHz)INPUT: -10 dBu (1 M ohm), AUX IN: -10 dBu
Speaker: 20 cm (8 inches)
Controls: POWER switch, AMP TYPE switch (CLEAN, CRUNCH, LEAD), GAIN knob, VOLUME knob, BASS knob, MIDDLE knob, TREBLE knob, EFFECT knob (CHORUS, DELAY, REVERB, SPRING)
Indicator: AMP TYPE

Connectors:
INPUT jack: 1/4-inch phone type
AUX IN jack: Stereo miniature phone type
REC OUT/PHONES jack: Stereo miniature phone type

Power Supply: AC adaptor (DC 5.7 V)
Current Draw: 700 mA
Accessories: Owner's manual, AC adapter

Size & weight

Width: 346 mm / 13-5/8 inches
Depth: 179 mm / 7-1/16 inches
Height: 317 mm / 12-1/2 inches
Weight: 4.7 kg / 10 lbs. 6 oz.

Notes: The Classic CUBE, Evolved for Maximum Flexibility

For over four decades, CUBE amplifiers have brought exceptional value to musicians everywhere, offering great sound and versatile features in portable, go-everywhere designs. The DUAL CUBE LX Guitar Amplifier carries on this long tradition, evolved with the latest BOSS advancements for unmatched flexibility. This desktop powerhouse is the ultimate guitar amp for home practice and jamming with friends. And with a generous array of connectivity options, its range extends to performing, recording, and many other applications.

Meet the Moment

With its compact size and authentic BOSS tones, the DUAL CUBE LX delivers instant gratification for everyday playing at home. And its ultra-flexible design lets you go much further when you want, providing advanced features that reach well beyond the capabilities of other desktop amps.

Practice and Jam Anywhere

Indoors and out, enjoy big, immersive sound with custom-designed stereo speakers and versatile power with the included AC adaptor or eight AA batteries.

Perform On Stage

Use the stereo Line Out jacks to directly connect to a PA system and perform with pro BOSS amp sounds, complete with mic'd cab emulation and expansive stereo effects.

Record to Your Favourite DAW

Use the DUAL CUBE LX to capture mix-ready sounds in music software on a computer or mobile device via USB or i-CUBE-Link.

Elevate Your Livestreams

With the Phones/Rec jack and mic volume control, you can capture your voice with a headphones mic and send it to the USB and i-CUBE Link outputs along with your guitar sounds.

Play Along with Backing Music

The DUAL CUBE LX offers many ways to play along with backing music from a mobile device or computer, including a stereo aux input, USB and i-CUBE Link Loopback, and an optional Bluetoothr adaptor.

Authentic Amp Tones

With its finely tuned stereo speaker system, the DUAL CUBE LX produces full, punchy guitar tones that belie the amp's small footprint. Choose from eight versatile amp types, all with natural feel and organic response honed with decades of BOSS amp development. Whatever your style or skill level, you'll find expressive sounds to build techniques and deliver inspired performances. There's also a dedicated mic preamp type, allowing you to use the amp as a portable vocal PA system.

Onboard BOSS Effects

The DUAL CUBE LX includes a variety of BOSS stereo and mono effects to enhance your sound. Out of the box, you can spice up tones with four mod effect types or Heavy Octave and add ambience with delay or two types of reverb. If you want to go even deeper, it's possible to change out effects and adjust settings via the DUAL CUBE LX Editor.

Deep Sound Customization

The intuitive panel controls on the DUAL CUBE LX make it easy to craft compelling sounds in the moment. Each amp type includes three user memories, allowing you to store all the knob settings for quick recall. And with the DUAL CUBE LX Editor, there's a world of additional creative power to explore. Select different amp and effect variations, adjust detailed parameters, and more from your Mac or Windows computer.

Stereo In for Modelers and Pedalboards

The DUAL CUBE LX features a special Stereo In amp type for connecting stereo devices, complete with advanced spatial processing that makes it sound like you're playing through a much larger cabinet. By default, it provides rich, full-range sound for an amp/effects processor such as the GT-1000, GT-1000CORE, GX-100, GT-1, or IR-200. With the DUAL CUBE LX Editor, you can alternately choose a neutral guitar amp tone inspired by the famous Roland JC-120, giving you an ideal platform for exploring the stereo capabilities of pedals like the BOSS 500 and 200 series.

Expand Your Possibilities

With optional FS-series footswitches, you can operate the onboard looper and switch memories while performing.


Specifications

Rated Power Output: 10 W (5 W+5 W)
Nominal Input Level: GUITAR/STEREO IN L, R: -10 dBu (1 M ohm), i-CUBE LINK/AUX IN: -20 dBu (15 k ohm)
Nominal Output Level: LINE OUT L/MONO, R: -10 dBu
Speakers: 10 cm (4 inches) x 2
Controls: POWER switch, AMP TYPE knob (ACOUSTIC SIM, JC CLEAN, US COMBO, BRIT COMBO, HI-GAIN STACK, METAL STACK, EXTREME, MIC, STEREO IN), MEMORY button, GAIN knob, VOLUME knob, BASS knob, MIDDLE knob, TREBLE knob, EFFECTS knob (CHORUS, FLANGER, PHASER, TREMOLO, HEAVY OCTAVE), DELAY/REVERB knob (DELAY, REVERB, SPRING), TAP button, MIC VOL knob, MASTER knob, LOOPBACK switch (i-CUBE LINK/AUX IN), LOOPBACK switch (USB)
Indicators: POWER, MEMORY, TAP, REC, PLAY, DUB

Connectors: GUITAR jack/STEREO IN L, R jacks: 1/4-inch phone type, i-CUBE LINK/AUX IN jack: Stereo Miniature phone type (Stereo, CTIA), FOOT SW jack: 1/4-inch TRS phone type, Bluetooth ADAPTOR connector: Dedicated connector, USB port: USB B type,, DC IN jack

PHONES/REC OUT jack: Stereo, Miniature phone type (Stereo, CTIA), LINE OUT L/MONO, R jacks: 1/4-inch phone type

Power Supply: AC adapter (DC 9 V), Alkaline battery (AA, LR6) x 8
Rechargeable Ni-MH battery (AA, HR6) x 8
Current Draw360 mA

Expected battery life under continuous use
Alkaline battery: Approximately 8 hours
Rechargeable Ni-MH battery: Approximately 10 hours (*1)

*1 When using batteries having a capacity of 2,500 mAh.
* These can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: Owner's Manual, Leaflet USING THE UNIT SAFELY, AC adaptor, Power cord, Mini cable (4-pole miniature phone type)
Options (sold separately)
Footswitch: FS-5U, FS-6, FS-7
Bluetoothr Audio MIDI Dual Adaptor (MODEL BT-DUAL)
Wireless MIDI Expression Pedal: EV-1-WL
Size & weight

Width: 341 mm / 13-7/16 inches
Depth: 162 mm / 6-7/16 inches
Height: 215 mm / 8-1/2 inches
Weight (excluding AC adaptor): 3.3 kg / 7 lbs 5 oz

Notes: Updated version of Boss's popular Katana amp, here in 100W combo incarnation. Designed with versatility in mind, the Katana offers five core amp characters, effects and Tube Logic valve emulation.

Supplier's Notes:
Katana MkII takes the acclaimed Katana guitar amp series to the next level, turbocharging the core platform with more sounds, more effects, and more features. Newly voiced variations are now available for all five amp characters, doubling the tonal options. And the onboard effects categories have been expanded from three to five, providing even more real-time processing to choose from. The usability has been ramped up too, with a power amp input for modelers and multi-FX, easy stereo expansion for dual amp setups, updated editor software, and many other enhancements.

More Sounds, More Versatility

The stage-class Katana MkII lineup picks up where the first generation left off, building on the same core tones and features that have made the series such a worldwide smash. If you loved the original Katana amps, you'll love Katana MkII even more. And if you're new to the party, get ready for sound, feel, and versatility that soars far beyond its price class.

Five Amp Characters, Ten Overall Tones

Katana MkII's five primary amp characters offer everything from organic vintage tones to modern high-gain sounds, plus a dedicated voice optimized for acoustic-electric guitar. The characters have now been extended with newly voiced variations, providing a wider palette of tone options to craft your personal sound.

Five Effects At Once

Katana MkII now includes five simultaneous effects categories, putting the tone-shaping power of a massive pedalboard right inside your amp. Independent Booster, Mod, FX, Delay, and Reverb sections come loaded from the factory with three variations in each, providing 15 ready-to-play effects to choose from. Connecting to BOSS Tone Studio lets you dive much deeper if you want-customize the sections with over 60 different effect types, change the order with four different chains, and much more.

Full-Throttle Sound Every Time You Plug In

Backed by BOSS's Tube Logic approach, Katana MkII delivers the authentic output distortion characteristics of genuine tube amplifiers, with the sound and feel becoming richer and more responsive as you turn up the volume. But unlike that classic tube amp, Katana MkII's variable Power Control makes it easy to fly in the sweet spot without getting fired from the gig or kicked out of the house. Just throttle back the overall volume as needed to enjoy inspiring, cranked-amp sound anywhere you play, from bedroom to stage.

Amplify Your External Gear

The Katana-100 MkII rocks as a standalone amp, but it also excels as a powered cabinet for a favourite preamp, modeler, or multi-effects unit. Connecting to the rear-panel Power Amp In jack bypasses Katana MkII's preamp and effects, letting you tap straight into the Tube Logic power section, complete with grab-and-go Power Control. And with BOSS Tone Studio, the input can be easily optimized for your particular gear with a high-pass filter and adjustable gain.

One-Touch Recall Of Custom Setups

One of the Katana-100 MkII's most powerful features is the ability to store favourite amp character and effects setups in Tone Setting memories for instant recall. After you've dialled in a sound with the panel controls, simply save it to the desired memory with a quick button hold. Eight Tone Settings (two banks of four) are available, with fast selection right from the panel. And for hands-free operation on the gig, just connect external footswitches or the GA-FC foot controller.

Specifications

Rated Power Output: 100 W
Nominal Input Level
INPUT: -10 dBu (1 M ohm)
AUX IN: -10 dBu (20 k ohms)
RETURN IN: -10 dBu (100 k ohm)
Speaker: 30 cm (12 inches) x 1
Controls: POWER switch, MASTER knob, PRESENCE knob, POWER CONTROL switch (STANDBY, 0.5 W, 50 W, 100 W)
[AMPLIFIER] VARIATION button, AMP TYPE knob (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN), GAIN knob, VOLUME knob

[EQUALIZER]: BASS knob, MIDDLE knob, TREBLE knob

[MULTI EFFECT]: BOOSTER button, MOD button, FX button, DELAY button, REVERB button, TAP button, BOOSTER knob, MOD knob, FX knob, DELAY knob, REVERB knob

[TONE SETTING] CH1 button, CH2 button, CH3 button, CH4 button, PANEL button

[STEREO EXPAND] STEREO EXPAND switch
Indicators: VARIATION, ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN, BOOSTER, MOD, FX, DELAY, REVERB, TAP, CH1, CH2, CH3, CH4, PANEL

Connectors
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
LINE OUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
GA-FC jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
AC IN jack
Power Consumption: 77 W
Accessories: Owner's manual, Power cord, GA-FC sticker

Options (sold separately) Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
GA FOOT CONTROLLER (GA-FC, GA-FC EX)
Amplifier Stand: BAS-1

Size & weight

Width: 530 mm / 20-7/8 inches
Depth: 248 mm / 9-13/16 inches
Height: 484 mm / 17-1/2 inches
Weight: 14.8 kg / 32 lbs 11 oz

Notes: Katana MkII takes the acclaimed Katana guitar amp series to the next level, turbocharging the core platform with more sounds, more effects, and more features. Newly voiced variations are now available for all five amp characters, doubling the tonal options. And the onboard effects categories have been expanded from three to five, providing even more real-time processing to choose from. The usability has been ramped up too, with a power amp input for modelers and multi-FX, updated editor software, and many other enhancements.

More Sounds, More Versatility

The stage-class Katana MkII lineup picks up where the first generation left off, building on the same core tones and features that have made the series such a worldwide smash. If you loved the original Katana amps, you'll love Katana MkII even more. And if you're new to the party, get ready for sound, feel, and versatility that soars far beyond its price class.

Five Amp Characters, Ten Overall Tones
Katana MkII's five primary amp characters offer everything from organic vintage tones to modern high-gain sounds, plus a dedicated voice optimized for acoustic-electric guitar. The characters have now been extended with newly voiced variations, providing a wider palette of tone options to craft your personal sound.

Five Effects At Once

Katana MkII now includes five simultaneous effects categories, putting the tone-shaping power of a massive pedalboard right inside your amp. Independent Booster, Mod, FX, Delay, and Reverb sections come loaded from the factory with three variations in each, providing 15 ready-to-play effects to choose from. Connecting to BOSS Tone Studio lets you dive much deeper if you want-customize the sections with over 60 different effect types, change the order with four different chains, and much more.

Full-Throttle Sound Every Time You Plug In

Backed by BOSS's Tube Logic approach, Katana MkII delivers the authentic output distortion characteristics of genuine tube amplifiers, with the sound and feel becoming richer and more responsive as you turn up the volume. But unlike that classic tube amp, Katana MkII's variable Power Control makes it easy to fly in the sweet spot without getting fired from the gig or kicked out of the house. Just throttle back the overall volume as needed to enjoy inspiring, cranked-amp sound anywhere you play, from bedroom to stage.

Amplify Your External Gear

The Katana-50 MkII rocks as a standalone amp, but it also excels as a powered cabinet for a favourite preamp, modeler, or multi-effects unit. Connecting to the rear-panel Power Amp In jack bypasses Katana MkII's preamp and effects, letting you tap straight into the Tube Logic power section, complete with grab-and-go Power Control. And with BOSS Tone Studio, the input can be easily optimized for your particular gear with a high-pass filter and adjustable gain.

One-Touch Recall Of Custom Setups

One of the Katana-50 MkII's most powerful features is the ability to store favourite amp character and effects setups in Tone Setting memories for instant recall. After you've dialled in a sound with the panel controls, simply save it to the desired memory with a quick button hold. Four Tone Settings (two banks of two) are available, with fast selection right from the panel. It's also possible to connect external footswitches for hands-free control on the gig.

Specifications

Rated Power Output: 50 W
Nominal Input Level: INPUT: -10 dBu (1 M ohm), AUX IN: -10 dBu (20 k ohms)
Speaker: 30 cm (12 inches) x 1

Controls:

POWER switch, MASTER knob, POWER CONTROL switch (STANDBY, 0.5 W, 25 W, 50 W)

[AMPLIFIER]: VARIATION button, AMP TYPE switch (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN), GAIN knob, VOLUME knob

[EQUALIZER]: BASS knob, MIDDLE knob, TREBLE knob

[MULTI EFFECT]: BOOSTER button, MOD button, FX button, DELAY button, REVERB button, TAP button, BOOSTER knob, MOD knob, FX knob, DELAY knob, REVERB knob

[TONE SETTING]: CH1 button, CH2 button, PANEL button

Indicators: VARIATION, BOOSTER, MOD, FX, DELAY, REVERB, TAP, CH1, CH2, PANEL

Connectors
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
AC IN jack
Power Consumption: 47 W
Accessories: Owner's manual, Power cord

Options (sold separately):
Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
Amplifier Stand: BAS-1

Size & weight

Width: 470 mm / 18-9/16 inches
Depth: 238 mm / 9-3/8 inches
Height: 398 mm / 15-11/16 inches
Weight: 11.6 kg / 25 lbs 10 oz

Notes: Serious Rock DNA forged into a compact, battery-powered amp

BOSS Katana amps have received accolades from guitarists everywhere for their fantastic sound and feel, onboard effects, and great value. Now, the Katana-Mini makes serious Katana tone accessible in a small, go-anywhere amp that runs on batteries. Offering sound quality that far exceeds other amps in its class, this miniature powerhouse features an authentic multi-stage analogue gain circuit for big, expressive sound, plus a traditional analogue EQ and an onboard tape-style delay. Ultra-compact and travel-ready, the Katana-Mini delivers inspiring Katana tone anywhere you want to play.

Unlike typical small, battery-powered guitar amps that offer so-so sound quality, the Katana-Mini produces big, full tone that inspires you to plug in and play for hours at a time. BOSS's comprehensive design approach includes a custom speaker, advanced hardware, refined circuitry, and special component selection, which all work together to produce maximum sound quality in a minimum footprint. The amp also incorporates BOSS's decades of research in energy efficient design, providing class-defying power and punch from only six AA-size batteries.

Inspiring Tones, Ready to Rock

The Katana-Mini's all-analogue input circuitry includes multiple gain stages that drive three classic sound settings, offering the same cascaded gain approach found in high-end amp designs. This is what gives the Katana-Mini its satisfying tone and quick, interactive feel, with distortion that's easily controlled with input volume and picking strength. Inspired by BOSS's flagship Waza amp, the Katana-Mini's Brown setting delivers expressive, high-gain tones rich with harmonics, perfect for heavy riffs and soaring solos. Crunch provides overdrive that's ideal for rock rhythms and bluesy leads, while Clean offers up crisp, sparkling tones with punchy dynamic response.

Analogue Tone Stack and Onboard Delay

In contrast to the limited EQs found in other small amps, the Katana-Mini comes equipped with a genuine three-band analog tone stack. This provides natural sound shaping via familiar bass, mid, and treble controls, just like the tone stack in a full-size stage amp. In addition, you can enhance your sound further with the Katana-Mini's cool tape-style delay. Using the dedicated time and level knobs, it's simple to dial in everything from subtle reverb-like ambience to long, warm delay repeats.

Jam at Home or Grab and Go

Thanks to the Katana-Mini's advanced-yet-compact design, you can plug into serious guitar tone any time and any place. Weighing just under three pounds, it sits easily on a tabletop or shelf at home. And with the integrated handle and battery operation, it's easy and convenient to grab the amp and play anywhere you want, indoors or out. With the aux input, you can even plug in your smartphone and jam along with your personal music library or tracks streamed from the web. And for private practice and recording situations, you'll want to take advantage of the phones/recording output, which features special cabinet voicing for real mic'd amp tone.

Specifications

Rated Power Output: 7 W
Nominal Input Level: INPUT: -10 dBu (1 M ohm), AUX IN: -10 dBu (20 k ohm)
Speaker: 10 cm (4 inches)
Controls: POWER switch, TYPE switch

GAIN knob: VOLUME knob

[EQUALIZER]
BASS knob
MIDDLE knob
TREBLE knob

[DELAY]
TIME knob
LEVEL knob
Indicators: POWER

Connectors
INPUT jack: 1/4-inch phone type
AUX IN jack: Stereo miniature phone type
PHONES/REC OUT jack: Stereo miniature phone type
DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 6, Rechargeable Ni-MH battery (AA, HR6) x 6, or
AC adapter (sold separately)
Current Draw: 350 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 7 hours
Rechargeable Ni-MH battery: Approximately 9 hours (When using batteries having a capacity of 2500 mAh.)
* This can vary depending on the capacity of the batteries and the conditions of use.
Accessories: Owner's manual, Alkaline battery (AA, LR6) x 6
Option (sold separately): AC adaptor (PSB series)

Size & weight

Width: 230 mm / 9-1/16 inches
Depth: 116 mm / 4-5/8 inches
Height: 181 mm / 7-1/8 inches
Weight (including battery): 1.2 kg / 2 lbs 11 oz

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Johnny Brook 20 Watt Amplifier is an ideal portable solution for any aspiring musician. It is suitable for most Electric and Electro Acoustic Guitars.

This ultra-portable amplifier is big on features: includes Volume Control (treble and bass), (6.5in.) 20 Watt speaker, 6.35 mm Input and 6.35 mm Headphone Output. It can also be used as a music speaker for your MP3 player, phone or laptop.

Notes: NuX Mighty 8BT is a compact guitar amplifier with features that enable it to be more than just a bedroom combo. Powered from the included 12V mains adaptor or optionally from 8 x AA batteries for portable use. The guitar input has clean, overdrive and distortion modes with modulation/delay effects and digital reverb. Settings can be customised for tone and effects and these are stored for each of the 3 modes. Deeper effects editing is provided by the Bluetooth link using the Might app, which is available from Google Play or App Store. A mic input is also included with a dedicated reverb send for vocals. A built-in drum machine is controlled by a simple but intuitive tap tempo/style button and rotary volume control. Aux in and headphone out complete the control panel to provide a multi-purpose jamming and recording amp for guitar players of all genres.

Notes: Mighty Lite BT now reaches the mkII generation with this reinvented model, adding new features, modes and computer editing to an already winning formula, bringing a world of sonic possibilities to the guitar player in a compact and convenient package. Keeping with the desktop form factor and powered by 6 x AA batteries or optional 9V adaptor, the mkII adds a USB type-C port which can connect to a PC or Mac computer to edit settings using the Mighty Editor software. In addition, the Bluetooth connection enables wireless editing via the Mighty Amp app. Both software and app are free to download from www.nuxefx.com. Mighty Lite BT mkII also supports audio streaming over Bluetooth for backing tracks and a built-in drum machine for solo practice. New features include effects, modulations and new amp models with an IR loader for flexible cabinet simulation, which can be programmed and stored into 7 internal presets. This new version offers a huge palette of tones in a manageable and versatile package for bedroom practice, project studios and travelling guitar players.

Bluetooth audio streaming and preset editing
USB type-C port for PC/Mac editing and firmware
Mighty Editor™ software and Mighty App™ free to download
Inbuilt drum machine and metronome
Digitally modelled effects, modulations, delay and reverb
Selectable amp models, cabinet IR loader and acoustic IRs
5 Watt speaker
Runs from 9Vdc power adapter (not supplied) or USB via power bank or 6 AA Batteries
Suitable power supply: 173.290UK
Power supply: 9Vdc (6 x AA battery or optional adaptor) or USB-C (185mA)
Power in: 9Vdc, 120mA (5.5 x 2.1mm DC jack pin negative)
Inputs: Guitar in (6.3mm jack), Aux in (3.5mm jack)
PC Com: portUSB type-C
Speaker: 75mmO (3") 5W, 4 Ohm
Phones output: 3.5mm jack
Dimensions: 166 x 124 x 98mm
Weight: 720g

In the box
The box for this item contains :
Mighty Lite BT mkII amplifier

Notes: Lead: Searing, high gain lead tone that's perfect for solos.

With amPlug 2, the crucial analog circuit has been drastically improved, and each model now provides three modes. Guitar types provide multi-effect functionality, and a rhythm function has been added to the bass type. A foldable plug mechanism that rotates 180 degrees and an auto power-off function are additional features that contribute significantly to improved convenience and ease of use.

The amPlug is the simplest way to get serious sound; occupying virtually no space, it's an ideal choice for any guitarist or bassist.

Plug Directly Into Your Guitar:

The Vox amPlug 2 Guitar Headphone Amp plugs directly into your guitar for authentic amp sounds through your headphones. The high-quality analog design simulates the circuitry of a vacuum tube amp and delivers rich, lead tones that you might not expect from such a compact unit.

Rotating Function:

With the Vox amPlug 2 Guitar Headphone Amp players are able to rotate it in five steps up to 180 degrees for optimum visibility. This innovative design is also compact and easily stored in a guitar case or bag. In addition, this updated model is equipped with an Aux-in jack, which is ideal for practising and connecting an MP3 player for jamming along to music.

Excellent Battery Life:

Unlike the previous model, the new Vox amPlug 2 now features an auto power-off function which automatically turns off by detecting audio signals of up to thirty minutes. This useful function prolongs the battery life, and further enhances the convenience of the amPlug.

Notes: The GALACTAVISE is Allpedal's flagship compressor. Built with the musician's needs in mind, it boasts an uncompromisingly sweet compressor circuit with a Mix control for dialling in that perfect balance of compressed tone and clean tone.

The top end can often be make or break with many compressor circuits, so AllPedal also added the ability to adjust just the right amount with the Presence control. Made with the highest quality components for a low noise floor and road-worthy durability.

Let the GALACTAVISE blast your tone into orbit!

GALACTAVISE is the best guitar compressor pedal for musicians seeking to balance their sound's dynamics. As the best compression pedal on the market, it allows guitarists to control their volume levels efficiently, ensuring a consistent sound output. This guitar compression pedal is an essential tool for both studio recording and live performance.

As with all their effect pedals, AllPedal took special care in the GALACTAVISE's aesthetics with its finish, sophisticated artwork and anodized knobs.

GALACTAVISE is proudly made by hand in Paducah, KY in the USA using the latest cutting-edge technology in the pursuit of ultimate tone.

Notes: Allpedal Microdose

Advanced Analogue Optical Phaser The Microdose is an optical, stage selectable analogue phaser, handcrafted with our hyper-detailed approach to usability, and tone. The Microdose is the first phaser launched by AllPedal, sometimes liquid-y smooth, sometimes chewy and lush.

Beginning with the Level control, you can always dial in the perfect volume for your phase tone. It also gives you the ability to mix in additional dry signal for a pleasant, subtle phasing effect. This control can also take you into pitch modulation territory when set to 100% wet. Res adds feedback, which makes for those over-the-top phase tones we all know and love. The Depth control adjusts the intensity of the effect, giving you everything from vintage 70's phase tones to sounds from a sci-fi soundscape. The wide range Rate control allows for both extremely slow and extremely fast modulation. Coupled with the Multiplier knob and the Tap Tempo switch, getting your effect locked in to the beat couldn't be easier. Sixteen wave shapes are available via the Waveform control and the Wave Set selector switch. Lastly, the Microdose includes an Exp pedal input for controlling the Rate. It works with many instruments including electric guitar, synthesizers, and bass.

Microdose is proudly made by hand in Paducah, KY in the USA using the latest cutting-edge technology in the pursuit of ultimate tone.

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: The Nectar "Tone Sweetener" strikes aperfect balance between versatility and simplicity. It offers a wide range of tones, spanning from a vintage tweed-style crunch to a full-bodied overdrive, and even a modern high-gain fuzz that pairs wonderfully with any guitar, pedal or amp.

Use the mode toggle to switch between the DRIVE and FUZZZ modes, while the LEDS indicate the selected mode, even when the effect is bypassed. Fine-tune your sound with the TASTE control to set the perfect eq for each guitar or amp.

The Nectar's responsiveness is truly unparalleled, like a delicate bee collecting pollen. Every nuance of your playing is enhanced and sweetened in the best way possible, with plenty of headroom.

True Bypass Design
Power requirement: 9V, 30mA
Made in California, USA

Notes: Ever loved something so much you wanted to "bee-come" it? While Beetronics' circuits are primarily original, their bees had classic favourites they "Wannabee-d," so Beetronics embraced these buzzing wonders as their own hive of inspiration, infusing a generous dose of honeyed innovation to craft the ultimate dual overdrive.

The WANNABEE "BEELATERAL BUZZ" is a dual-drive pedal like no other. It combines two classic circuits, each offering three distinct FLAVORS, and lets users weave them together however they like. They can run them side by side or have one flow into the other, unlocking a world of tonal possibilities, as sweet as a jar of honey.

Circuit #0, Beetronics's Bluesbreaker-inspired creation, harmonizes vintage amp tones with crystal-clear crispness, all while preserving that beloved tube-like warmth. Plus, its three flavours give users control over the low-end oomph. Circuit #1 is Beetronics's take on the legendary Klon. All those iconic transparent overdrive tones are here, with a sweet honey twist. Unlike any other Klon, Beetronics' Circuit #1 offers a unique trio of flavours that grant users control over their clean blend level.

This pedal's core houses a truly exceptional Routing System, crafted by Beetronics' expert bees. It's the gateway to exploring unique tones. What makes it stand out is that it lets users not only choose the order of the circuits but also blend them in parallel, something other dual-drive pedals can't do.

In the centre position, users can use the volume controls to mix both circuits in parallel. And with the footswitch, they're in charge of when each circuit kicks in. Flick it to the right, and Circuit #0 flows into Circuit #1; shift left, and Circuit #1 flows into Circuit #0. When chaining one circuit into another, users can simply crank up the volume on the first to push the second into a thrilling buzz of distortion.

The WANNABEE draws inspiration from Beetronics' favourite overdrive circuits and then elevates them to a whole new level, enhancing their tone with a touch of honey and introducing innovative features. It unlocks a world of possibilities by blending both circuits in the most unique ways. Beetronics hopes this can be the ultimate overdrive tool to help users truly BEE THEMSELVES.

Product specs

Pedal Dimensions 5.5" x 4" x 2.5" (including knobs, switches and etc)
Pedal Weight - 1.1 lbs / 0.5 kg
Package Size - 6" x 5.25" x 3"
Requires 9VDC power supply (Centre Negative)
*Does not include power supply

Notes: Unbelievable "talking" wah effects!

The BOSS AW-3 Dynamic Wah pedal gives guitarists a wide range of classic auto-wah and dynamic wah effects, plus a new "Humanizer" effect which can simulate human vowel sounds. A Bass input provides a variety of funky wah sounds for bass guitar.

A "Talking" Pedal

The AW-3 Dynamic Wah is the first compact wah pedal to incorporate human voice-type sounds through a new "Humanizer" Mode. Of course, you can also choose from standard up-and-down wah effects, plus a Tempo Mode and resonant synth-like Sharp Mode.

Endless Possibilities

Choose from both fixed and auto wah settings using the Manual control or pedal for tempo input. By connecting an optional expression pedal, the AW-3 can also be used for Pedal Wah effects. A dedicated Bass input permits direct processing of bass guitars.

Specifications:

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
MODE knob
SENS knob
MANUAL knob
DECAY knob
Pedal switch

Indicator: CHECK indicator (Used for indication of check battery)

Connectors:
GUITAR IN jack: 1/4-inch phone type
BASS IN jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
EXP/CTL jack: 1/4-inch phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 50 mA

Expected battery life under continuous use:
Alkaline: Approx. 8 hours
*These figures will vary depending on the actual conditions of use.

Accessories:
Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
Alkaline battery (9 V, 6LR61)
Options (sold separately):
AC adaptor: PSA series
Expression Pedal: EV-30/FV-500H/FV-500L, Roland EV-5
Footswitch(momentary-type): FS-5U/FS-6/FS-7

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 430 g / 1 lb

Notes: Next-Generation Guitar Compressor for Expressive Players

Powered by BOSS's MDP technology, the CP-1X is a new type of multiband compressor for guitar that preserves the character of your instrument and technique for unlimited musical expression. Intelligent processing analyses your signal in multiple dimensions as you play, providing advanced dynamics control that never colours or muddies your tone like typical stompbox compressors can. The simple, four-knob interface makes it easy to dial in sophisticated results, while the handy gain reduction indicator always shows you how much compression is being applied. Optimized for all types of guitars, the CP-1X offers next-generation performance for every style of music.

Intelligent Processing for Natural Sound

When you first plug into the CP-1X, you're in for a totally new guitar compressor experience. Typical stompbox compressors colour and restrict your sound, and are hard to dial in for various playing styles. The innovative CP-1X eliminates these drawbacks and more, opening up a world of expressive potential. The powerful MDP engine analyses your guitar's many different tonal elements in real time, providing natural compression that intelligently follows and adapts to your playing. With this high-tech approach, your true tone and technique always comes through, even when using aggressive settings for that effected "squish."

Tap Into New Levels of Musical Expression

No matter what kind of guitar or style you play, the CP-1X always delivers rich, musical tone. From mellow phrases and arpeggios to heavy rhythms, fast solos, and beyond, every playing nuance remains detailed and defined. The pedal also provides superior performance for chicken pickin' country licks, funky rhythm grooves, and other standard guitar compressor applications, and works great as a booster thanks to its punchy, transparent sound. On seven- and eight-string guitars, the CP-1X easily controls upper-range dynamics without compromising your powerful low-end tone. And when used with acoustic-electric guitar, the natural, lush overtones are fully preserved as you go from gentle fingerpicking to full-chord strums.

Studio-Level Results with Simple Controls

With the knobs on most pedal compressors, what you see is what you get. Not so with the CP-1X, as the pedal's controls interact with each other at a highly detailed level. When you turn a knob, numerous interlocked parameters are adjusted under the hood at once. This gives you dynamics control and tone shaping ability that far exceeds standard compressor pedals, providing results previously attainable only with high-end studio processing. The good news is that you don't need to be a sound engineer to use the CP-1X-its sophisticated MDP processing has been meticulously fine-tuned by the BOSS engineers to let you dial in ultra-polished tone with familiar stompbox controls.

High-End Features for Pro Performance

The CP-1X features pro-level 18-volt input circuitry that provides ample headroom for the hottest guitar pickups, ensuring exceptional clarity with any instrument. A 16-segment gain reduction indicator clearly displays the compression amount, making it easy to see what the pedal's doing. The CP-1X's noise performance is also extremely low in comparison with other compressors, another huge benefit brought by BOSS technology.

MDP: Advanced Tech, Superior Tone

Leveraging decades of research and development, BOSS's proprietary Multi-Dimensional Processing (MDP) technology offers a fresh approach to achieving exceptional guitar tones. In real time, MDP analyses the various elements that make up the sound, including frequency, overtones, dynamics, pickup response, and more. Various playing characteristics are analysed as well, such as note register, single notes vs. chords, bends, vibrato amount, and others. Each individual element is then processed in unique ways to produce optimized tones as you play. With its ultra-detailed, high-tech approach, MDP delivers tone quality and playability that reaches far beyond the limits of traditional effects processing.

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
BypassL Buffered bypass

Controls:
Pedal switch
COMP knob
RATIO knob
ATTACK knob
LEVEL knob

Indicators: CHECK indicator (Serves also as battery check indicator), GAIN REDUCTION indicator
Connectors:
INPUT jack
OUTPUT jack
DC IN jack
Power Supply: Alkaline battery (9V, 6LR61), AC adaptor (sold separately)
Working Voltage: 18 V
Current Draw90 mA

Expected battery life under continuous use: Alkaline: Approx. 2 hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Alkaline battery (9V, 6LR61)
Option (sold separately) AC adaptor (PSA series)

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 450 g / 1 lb

Notes: Improves your overall tone

The CS-3 Compression Sustainer pedal compresses louder signals while boosting lower signals, providing smooth sustain without degrading the original sound quality. This is the perfect pedal for guitarists and bassists who want to sound their best.

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: SUSTAIN knob, ATTACK knob, TONE knob, LEVEL knob, Pedal switch
Indicator: CHECK indicator (Serves also as battery check indicator)
Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, DC IN jack
Power Supply: Carbon-zinc battery (9V, 6F22) or Alkaline battery (9V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 20 mA

Expected battery life under continuous use: Carbon: Approx. 10.5 hours, Alkaline: Approx. 26 hours
*These figures will vary depending on the actual conditions of use.
Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery/9 V type (6F22)
Options (sold separately) AC adaptor: PSA series
Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight: 380 g / 14 oz

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The DD-200 Digital Delay brings together sounds and features inherited from the flagship DD-500 into an even smaller footprint. Twelve different modes offer an inspiring variety of delay colours from modern digital to classic analogue, letting you dial up everything from basic echoes to rich ambient pads and everything in-between. There's also a looper that's always ready to use, plus a selectable carryover function for seamless transitions between memories.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current DD-200 system software

Twelve Modes, Unlimited Sounds

With 12 different modes to choose from, the DD-200 provides nearly any flavour of delay in an amazingly compact size. At your command are super-clean digital delays, gritty analogue echoes, and spot-on retro sounds from the Roland RE-201 Space Echo and Binson Echorec 2. There's also a variety of options for creating reverse effects, lo-fi tones, and pulsing rhythmic sounds with layered delays. And with the Tera Echo, Shimmer, and Pad Echo modes, immersive ambient colours are just a knob twist away.

Dial in Sounds Fast

The DD-200 features a no-nonsense interface, making it easy to craft inspiring sounds in the heat of the moment. Essential delay parameters are provided on dedicated controls for direct, hands-on access. And in each mode, the function of the PARAM knob changes to parameters tailored for the selected type, delivering extended control with no need to menu dive.

Save and Recall Your Favourite Setups

The DD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall. If you crave deeper control, setups can be directly recalled via program change messages from an external MIDI device. And by enabling the carryover function, delay repeats will keep sounding as you change memories for smooth, free-flowing transitions.

Deep Real-Time Control

By default, the DD-200's multi-function footswitches provide access to basic functions like bypass, memory scrolling, tap tempo, and looper control. But you can easily reassign them to hold, warp, and many other functions. External control is also possible via footswitches or an expression pedal, and MIDI I/O is even provided on space-saving mini TRS jacks. Via MIDI, you're able to chain multiple 200 series pedals and select memories on all of them at once, and also control a wide range of functions from MIDI devices like the ES-8 and ES-5 effects switchers.

Ready-to-Go Looper

Any time you're ready, pressing the DD-200's two footswitches together puts you into looper mode. Up to 60 seconds of mono recording time is available, and operation is simple and direct with the onboard switches. And since the looper engine functions independently, you're able to develop expressive loops with any of the DD-200's rich delay sounds.

DD-200 Delay Modes

Standard-Clear digital delay. PARAM adjusts the delay attack.
Analog-Emulates classic analogue "BBD" delays like the BOSS DM series. PARAM controls character and distortion amount.
Tape-Emulates the warm tape-based sound of the legendary Roland RE-201 Space Echo. PARAM selects different combinations of three playback heads, and also adjusts the amount of distortion in the delay sound.
Drum-Models the drum-based Binson Echorec 2. PARAM selects different combinations of four playback heads, and also adjusts the amount of distortion in the delay sound.
Shimmer-Pitch-shifted delay for lush, heavenly textures. PARAM adjusts the delay brightness.
Tera Echo-Spacious, animated ambience effect derived from the BOSS TE-2 pedal. PARAM adjusts the sound character.
Pad Echo-Newly developed delay sound for creating drifting ambient textures. PARAM adjusts the delay attack.
Pattern-Rhythmic sounds with 16 delay lines layered together. PARAM selects different pattern variations.
Lo-Fi-Delay sound with fat, distorted character. PARAM adjusts the distortion effect.
Dual-Two different delay lines connected in series. PARAM adjusts the time of the second delay.
Reverse-Backwards delay for cool psychedelic effects and other unique tones. PARAM adjusts the delay attack.
Ducking-Delay with a built-in ducking effect. PARAM adjusts the input sensitivity.

*The product names mentioned on this page are registered trademarks or trademarks of their respective owners. These names are used because it is the most practical way of describing the sounds that are simulated.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point

Modes: 12 modes
STANDARD, ANALOG, TAPE, DRUM, SHIMMER, TERA ECHO, PAD ECHO, PATTERN, LO-FI, DUAL, DUCKING, REVERSE

Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohm
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohms
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass

Controls:
ON/OFF switch, MEMORY/TAP switch
MODE knob, TIME knob, FEEDBACK knob, E. LEVEL Knob, PARAM knob, TONE knob, MOD DEPTH knob
TAP DIVISION button, MEMORY button

Display: 7 segments, 3 characters (LED)
Indicator: TAP DIVISION indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 225 mA

Expected Battery Life Under Continuous Use
Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.

Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

0 dBu = 0.775 Vrms

Notes: BOSS's iconic DD-3 Digital Delay has been a pedalboard staple since 1986, loved everywhere for its great sound and simple operation. With the DD-3T, we've updated the classic stomp with enhanced functionality while fully retaining the original's sound and control layout. It's now possible to tap in delay tempos using the onboard switch or an external one, with your choice of three beat subdivisions. And the direct output jack has been moved next to the main output, providing easier connectivity for wet/dry setups.

In continuous production for over three decades, the DD-3 has been the go-to delay stomp for countless players. Based on the DD-2-the world's first digital delay pedal from 1983-the DD-3 is revered for its warm, round delay tone and simple controls that let you dial in sounds fast. The DD-3T's sound circuitry and controls are identical to the DD-3, delivering every drop of that classic vibe you know and love.

A key addition the DD-3T brings is tap tempo, an essential feature for creating the rhythmic delay effects at the heart of many guitar styles. In delay mode, hold the pedal switch for two seconds to toggle between bypass and tap operation. And for on-demand tap control, simply connect an external footswitch. When the DD-3T receives tap input, up to 800 ms of delay time is available, and the Mode knob sets the tap subdivision (quarter-note triplet, dotted-eighth note, or quarter note).

The DD-3T features a direct output jack like the DD-3, but it's been moved next to the main output jack to make connections easier. Plugging a cable into the direct out converts the main out to delay only, allowing you to send wet and dry signals to different amps for wide, immersive sounds. And if your amp or switcher has a parallel effects loop, just connect a dummy plug to the direct out to mute the dry sound for effect-only blending.

The original DD-3 (and DD-2 before) included a forward-thinking Hold function, which allowed you to capture a sound up to 800 ms long, play it continuously, and jam over the top. Many years later, BOSS further developed this creative concept with the successful Loop Station products, which helped spawn the new musical style of live looping. The DD-3T includes the same Hold function as the DD-3, but it's been renamed "Short Loop" to reflect today's common usage.

Specifications

Nominal Input Level: -20 dBu
Input Impedance: 1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DIRECT OUT jack: 1/4-inch phone type
TEMPO jack: 1/4-inch phone type
DC IN jack

Power Supply: Alkaline battery (9 V, 6LR61), AC adaptor (PSA series: sold separately)
Current Draw: 70 mA

Expected battery life under continuous use: Alkaline: Approx. 5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")

Alkaline battery (9 V, 6LR61)

Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7

Size & weight

Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 420 g / 15 oz

Notes: Introducing the DD-8, the most wide-ranging and feature-rich BOSS compact series delay ever. This loaded pedal delivers more of everything-more great sounds, more delay time, more control options, and more connectivity. And it does it all in a standard BOSS pedal that slides easily into any mono or stereo setup. Eleven modes provide delay colours from basic to exotic, plus a looper with unlimited overdub capability and external control support. For maximum versatility in a minimum amount of space, there's no better delay stomp than the DD-8.

Equipped with a diverse selection of delays, the DD-8 packs impressive sonic range into one small pedal. Clean digital delays, vintage analogue and tape types, and modulation echo are available, plus specialty delays like shimmer and reverse. There's a new Warm type for softer echo tones, and a +RV type that blends delay and reverb together. Warp is perfect for dynamic ambient textures, while the new GLT type is great for glitchy rhythmic effects.

Everything sounds bigger and better in stereo, and the DD-8 delivers with full stereo I/O support and your choice of three output modes. The default independent mode provides linked parallel delays on the left and right channels, allowing you to maintain the true balance of stereo input sources in the effect sound. There's also a panning mode for ping-pong delay effects, and a wide stereo mode for enhanced spatial depth.

The DD-8's extensive real-time delay options help bring your music to life. You can tap in tempos with the onboard pedal switch, and control the Warp and GLT modes for unique expressive effects. Adding one or two footswitches unlocks more creative possibilities, like on-demand tap tempo, extended looper control, and a cool Twist effect for soaring echo sounds. Alternately, an expression pedal can be used for continuous control of level, feedback, or delay time-or all of them at once.

Having a looper on your pedalboard is a handy thing-it's great for practice, checking sounds at gigs, and creating on-the-fly backing while performing. The DD-8's looper mode has you covered, so you don't have to take up precious space with a dedicated pedal. All looper functions can be controlled with the onboard switch, providing all-in-one operation. But if you prefer to work with extended controls, just connect one or two footswitches to operate the looper's stop and clear functions externally.

The DD-8's inputs and outputs have smart functionality, allowing you to set the pedal for any application simply by connecting cables in different ways. A variety of mono and stereo connections are supported, including discrete dry and effect outputs for wet/dry setups. It's even possible to defeat the dry signal entirely, perfect for delay-only blending in a parallel effects loop.

Analog-Classic analogue BBD delay sound.
Standard-Clear digital delay.
Tape-Vintage tape-based delay sound.
Warm-Digital delay with a softer sound.
Reverse-Backwards delay for cool psychedelic effects and other unique tones.
+RV-Digital delay with reverb added.
Shimmer-Pitch-shifted delay for lush, shimmering textures.
Mod-Digital delay with modulation added on the repeats.
Warp-Unique delay with expressive pedal control. Holding the pedal switch increases feedback and level, allowing you to create ambient swell effects.
GLT-Newly developed delay mode that creates glitchy machine-gun effects when the pedal switch is pressed. Adjust the Feedback and Time knobs for a wide variety of sounds.
Loop-Loop recorder with overdub capability and up to 40 seconds of recording time with mono input (20 seconds with stereo input).

Specifications

Nominal Input Level: -20 dBu
Input Impedance1 M ohm
Nominal Output Level: -20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Bypass: Buffered bypass
Controls: MODE knob, TIME knob, FEEDBACK knob, E.LEVEL(Effect Level) knob, CARRYOVER switch
Pedal switch
Indicator: CHECK indicator (Used for indication of check battery)

Connectors: INPUT-A(MONO)/INPUT-B jack: 1/4-inch phone type
OUTPUT-A(MONO)/OUTPUT-B jack: 1/4-inch phone type
TEMPO/EXP jack: TRS 1/4-inch phone type
DC IN jack

Power Supply:
Alkaline battery (9 V, 6LR61)
AC adaptor (PSA series: sold separately)

Current Draw: 100 mA

Expected battery life under continuous use
Alkaline: Approx. 3.5 hours
*These figures will vary depending on the actual conditions of use.

Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (9 V, 6LR61)
Options (sold separately)
AC adaptor: PSA series
Footswitch: FS-5U, FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

Size & weight
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height: 59 mm / 2-3/8 inches
Weight (including battery): 440 g / 1 lb

Notes: The Benchmark in Guitar Distortion

The DS-1 Distortion is a true icon in the world of guitar effects. Introduced in 1978, BOSS's first distortion pedal defined a bold new sound, delivering hard-edged attack and smooth sustain that's been a staple of players for generations. The DS-1 is the top-selling BOSS compact pedal ever, and its original, unchanged design continues to inspire the creation of great music everywhere. The classic DS-1 tone is behind the signature sounds of numerous rock legends, and is ready to fuel your own signature sound today.

Genre-Defining Distortion

Before the DS-1, most distortion pedals produced harsh, buzzy tones and muddy sound at high gain settings. In 1978, BOSS engineers changed all that by developing a unique distortion circuit for the DS-1 that produces tight, hard-edged gain with rich harmonics while retaining the unique characteristics of different guitars and playing techniques. Hard rock, metal, and punk styles began to flourish in the '70s and '80s, and the DS-1's tone had a defining influence on these genres. That trend has endured through multiple generations, and players around the world continue to seek out the classic DS-1 sound.

Gain from Mild to Heavy

From its modest three-knob interface, many different sound colours can be coaxed from the DS-1. Its pioneering two-stage circuit incorporates both transistor and op-amp gain stages. This approach is critical to the DS-1's characteristic low-frequency fullness, which is loved by guitarists that play heavy music genres. The distortion knob offers an extremely wide range, from a mild boost for driving amps and pedals to full-throttle gain for monster rock riffs.

Powerful Tone Shaping

Unlike typical tone controls that only cut highs, the DS-1's tone circuit features an innovative design that offers far more range. Turning the knob clockwise increases highs and decreases lows, while going counter-clockwise has the opposite effect. This lets you dial in everything from tight, cutting rhythm sounds to smooth, fat lead voices. The tone control is particularly effective for maintaining low-end definition when using the DS-1 as a booster with vintage-style amps, which often sound muddy when driven with other distortion pedals.

Nominal Input Level-20 dBu
Input Impedance: 1 M ohm
Nominal Output Level-20 dBu
Output Impedance: 1 k ohm
Recommended Load Impedance: 10 k ohms or greater
Controls: Pedal switch, TONE knob, LEVEL knob, DIST knob
Indicator: CHECK indicator (Used for indication of check battery)
Connectors:
INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
DC IN jack
Power Supply:
Alkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22)
AC adaptor (PSA series: sold separately)
Current Draw10 mA

Expected battery life under continuous use:
Carbon: Approx. 50 hours
Alkaline: Approx. 80 hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Carbon-zinc battery (9 V, 6F22)
Option (sold separately)AC adaptor (PSA series)

Size & weight (incl. battery)
Width: 73 mm / 2-7/8 inches
Depth: 129 mm / 5-1/8 inches
Height59 mm / 2-3/8 inches
Weight: 360 g / 13 oz

Notes: Premium tone for players on the go

Ultra-portable and easy to use, the GT-1 delivers pro-level tones everywhere you play. Driven by the powerful BOSS GT-series engine, it gives you access to a huge selection of world-class amps and effects for all types of music. A streamlined interface enables quick and intuitive sound creation, while an assignable control switch and expression pedal provide dynamic real-time effects adjustment. And by connecting to BOSS TONE CENTRAL, you can download free pro patches, editing software, and more. Equally suited for beginners, weekend warriors, and traveling players, the GT-1 packs premium sound in a compact and rugged package.

Exceptional Sound

Thanks to its Premium BOSS sound engine, the GT-1 provides tone quality and sound-shaping ability that far exceeds typical compact multi-effects. A history of BOSS processing is at your fingers, from classics such as the OD-1 Overdrive to modern effects powered by innovative MDP technology. There's a huge selection of COSM amp tones on tap too, including vintage legends and BOSS original amps optimized for ideal tone and response. Specialized effects like Acoustic Simulator, Guitar Simulator, and others provide numerous tonal options, and there's even a looper to enhance your practice sessions and stage performances.

Portable Tone Partner

The GT-1 was designed for musicians on the move. It's surprisingly lightweight and compact, yet still delivers the rugged durability that BOSS is famous for. The modern design is easy to slip in and out of a guitar bag's accessory compartment, with no worries of hard edges causing damage to your axe. AC or battery power provides flexibility for any performing situation, and up to seven hours of battery life is available for street performing and other mobile gigs.

Easy Patch Selection and Sound Creation

With the GT-1, it's simple to find fantastic tones for your style, and just as simple to customize them to taste. Beginners can get great sounds right away, while more experienced players will appreciate how quick and intuitive it is to adjust sounds. The Easy Select function allows you to choose patches by genre, distortion, or effect type, while Easy Edit lets you tweak drive, modulation, and echo tones to perfection with little effort. Dedicated panel buttons provide quick on/off switches for effect groups, and also unlock deep-dive parameters for microscopic fine-tuning.

BOSS Tone Central and BOSS Tone Studio

At BOSS Tone Central, you'll find tons of free patch collections for playing all types of music with the GT-1. Created by pro guitarists, these patches are dialled-in and ready to use, and make great starting points for advanced players who like to create their own custom sounds. The free BOSS Tone Studio software provides a full-featured editor/librarian for the GT-1, as well as integrated access to all the patch collections at BOSS Tone Central.

Maximum Control in a Small Space

The GT-1's three footswitches are smartly designed to provide patch selection, tuner access, looper control, and more in a minimal footprint. The dedicated CTL1 switch is freely assignable to functions like tap tempo, effects on/off, and numerous others, while the expression pedal and toe switch are assignable to volume, wah, and various effects parameters. If you crave more control, there's even a jack for connecting up to two external footswitches or an expression pedal. And in addition to providing access to BOSS Tone Central and BOSS Tone Studio, the GT-1's USB jack lets you record tones with your favourite DAW.

Specifications

Sampling Frequency: 44.1 kHz
AD Conversion: 24 bits + AF method
* AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 24 bits
Effects: 108 types
Patches: 99 (User) + 99 (Preset)
Phrase Loop: 32 sec
Nominal Input Level: INPUT: -10 dBu, AUX IN: -20 dBu
Maximum Input LevelINPUT: +7 dBu, AUX IN: 0 dBu
Input Impedance: INPUT: 1 M ohm, AUX IN: 27 k ohms
Nominal Output LevelOUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater
Controls: DOWN switch, UP switch CTL1 switch, EASY SELECT button, EASY EDIT button, FX1/COMP button, OD/DS button, PREAMP button, FX2/MOD button, DELAY button, REVERB button, MEMORY EDIT button, EXIT button

Display: Graphic LCD (132 x 32 dots, backlit LCD)
Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks: 1/4-inch phone type, CTL2, 3/EXP2 jack: 1/4-inch TRS phone type, AUX IN jack: Stereo miniature phone type, PHONES jack: Stereo miniature phone type, USB COMPUTER port: USB type B, DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 4, AC adaptor (sold separately)
Current Draw: 200 mA

Expected battery life under continuous use:
Alkaline: Approx. 7 hours
* These figures will vary depending on the actual conditions of use.
Accessories: Owner's manual, Leaflet "USING THE UNIT SAFELY", Alkaline battery (AA, LR6) x 4

Options (sold separately):
AC adaptor: PSA series
Footswitch: FS-5U, FS-5L, FS-6, FS-7
Expression Pedal: FV-500L, FV-500H, Roland EV-5

Size & weight

Width: 305 mm / 12-1/16 inches
Depth: 152 mm / 6 inches
Height: 56 mm / 2-1/4 inches
Maximum height: 74 mm
2-15/16 inches
Weight (including battery): 1.3 kg / 2 lbs 14 oz

Notes: High-end amps and effects from vintage to modern with advanced flexibility

With the new GT-100 Version 2.0 update, BOSS' high-end multi-effects processor is now even more powerful than before, adding a host of great new features to its already formidable arsenal. Two new amp types are included, along with cutting-edge MDP effects, an acoustic guitar simulator, and an improved rotary effect. A convenient Guitar-to-MIDI function is on board as well, letting you connect to a computer to play soft synths and input MIDI note using your normal guitar. The GT-100's USB audio capabilities have been expanded too, providing greater flexibility for re-amping applications. And with the BOSS TONE STUDIO software, you can now edit GT-100 patches from a friendly graphical interface on your computer.

Advanced COSM Amps: Beyond Vintage

With its next-generation COSM processor, the GT-100 ushers in a new era of expression and sonic capabilities. Recreating the meticulous details of vintage amps and how they behave, the GT-100 excels in not only cloning classic amps, but in creating a new world of unimagined tones as well. The Amp Customize function lets you mutate classic amps beyond reality to construct completely new, unimagined sounds!

Simple and Intuitive User Interface

The GT-100's unique dual-LCD and eight-knob user interface provides fast access and intuitive control. There are no menus to navigate; every function is instantly available. The tone-customizing functionality has been improved as well-all patches, amps, and overdrives/distortions can be created from scratch and/or customized with the friendly graphical Tone Grid.

New Tonal Possibilities with the Accel Pedal

A new dimension of expression is available with the Accel pedal, which enables control of multiple parameters simultaneously, as well as time-variant effects such as Feedbacker, S-Bend, Twist, and more. Experiment with creative combinations of parameters and bring dynamic new sounds to your performances by interacting in real time with this cool pedal.

A/B Channel Divider Function

Another notable feature in the GT-100 is the versatile A/B Channel Divider. This lets you assign different amps and effects to each channel, either for blending together or switching between them with a footswitch. Going even further, you also have the ability to switch channels by playing strength or frequency range. With each channel capable of driving its own effects and amps settings, the range of tones gets wider and wilder! You can assign smooth, mild lead tones to the mid-to-high pitches, for example, and heavy, cutting tones to the lower notes-the tonal possibilities are endless.

Edit and Organize Sounds with BOSS TONE STUDIO

Available as a free download for Mac or Windows, BOSS TONE STUDIO gives you an intuitive graphical interface for creating and editing GT-100* effects patches from your computer via USB. The software also makes it easy to organize and archive patches, and to load them as needed for different gigs and recording sessions. If your computer has Internet access, BOSS TONE STUDIO provides an integrated connection to the BOSS TONE CENTRAL website, where you can preview and download free gig-ready patches created by top guitar pros directly into the GT-100.

*GT-100 Version 2.0 software is required for compatibility with BOSS TONE STUDIO.

BOSS TONE CENTRAL: Your Web Home for Free Patches, Instructional Vids, Artist Tips, and More

BOSS TONE CENTRAL is the ultimate destination for all players that use BOSS products. Evolving to include a growing selection of BOSS gear, this site gives you access to lots of premium content, including demo videos and free patches created by famous guitarists, touring pros, and session players.

Specs

AD Conversion: 24 bits + AF method

*AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (S/N) ratio of the A/D and D/A converters.
DA Conversion: 24 bits
Sampling Rate: 44.1 kHz
Program Memories: 400: 200 (User) + 200 (Preset)

Effect Type:

COMP, PREAMP(*1), OD/DS(*2), EQ, FX1/FX2(*3), DELAY, CHORUS, REVERB, PEDAL FX, NS1/NS2, ACCEL FX

*1 PREAMP
NATURAL CLEAN, FULL RANGE, COMBO CRUNCH, STACK CRUNCH, HiGAIN STACK, POWER DRIVE, EXTREME LEAD, CORE METAL, JC-120, CLEAN TWIN, PRO CRUNCH, TWEED, DELUXE CRUNCH, VO DRIVE, VO LEAD, MATCH DRIVE, BG LEAD, BG DRIVE, MS1959 I, MS1959 I+II, R-FIER VINTAGE, R-FIER MODERN, T-AMP LEAD, SLDN, 5150 DRIVE, BGNR UB METAL*, ORNG ROCK REVERB*, CUSTOM

*2 OD/DS

MID BOOST, CLEAN BOOST, TREBLE BOOST, CRUNCH, NATURAL OD, WARM OD, FAT DS, LEAD DS, METAL DS, OCT FUZZ, A-DIST*, BLUES OD, OD-1, T-SCREAM, TURBO OD, DIST, RAT, GUV DS, DST+, METAL ZONE, '60S FUZZ, MUFF FACE, CUSTOM

*3 FX1/FX2

T.WAH, AUTO WAH, SUB WAH, ADV. COMP, LIMITER, SUB OD/DS, GRAPHIC EQ, PARA EQ, TONE MODIFY, GUITAR SIM., AC.GUITAR SIM*, SLOW GEAR, DEFRETTER, WAVE SYNTH, SITAR SIM., OCTAVE, PITCH SHIFTER, HARMONIST, OVERTONE*, SOUND HOLD, AC. PROCESSOR, PHASER, FLANGER, TREMOLO, ROTARY1, ROTARY2*, UNI-V, PAN, SLICER, VIBRATO, RING MOD., HUMANIZER, 2X2 CHORUS, SUB DELAY, TERA ECHO*

*Newly Added Features (Version 2.0)
A-DIST is available in OD/DS and in SUB OD/DS of FX2.
OVERTONE and TERA ECHO are only available in FX2.

Nominal Input Level
INPUT: -10 dBu
RETURN: -10 dBu
AUX IN: -20 dBu

Input Impedance
INPUT: 1 M ohm
RETURN: 100 k ohms
AUX IN: 47 k ohms

Nominal Output Level
OUTPUT: -10 dBu/+4 dBu
SEND: -10 dBu

Output Impedance
OUTPUT: 2 k ohms
SEND: 2 k ohms

Dynamic Range: 100 dB or greater (IHF-A)
Displays: Graphic LCD (132 x 64 dots, backlit LCD) x 2

Connectors
INPUT jack (1/4-inch phone type)
AUX IN jack (Stereo miniature phone type)
OUTPUT L/MONO, R jacks (1/4-inch phone type)
PHONES jack (Stereo 1/4-inch phone type)
EXT LOOP jacks (SEND, RETURN; 1/4-inch phone type)
AMP CONTROL jack (1/4-inch phone type)
SUB CTL1, 2/SUB EXP jack (1/4-inch TRS phone type)
USB port
MIDI connectors (IN, OUT)
DC IN jack

Power Supply: DC 9 V
Current Draw: 600 mA

Accessories:
AC adaptor(PSB-1U + AC Cord Set)
USB Cap
Owner's Manual

Options (sold separately)

Footswitch: FS-5U
Dual Footswitch: FS-6, FS-7
Expression Pedal: FV-500L/500H, EV-30, Roland EV-5
AC adaptor (PSB-1U)

*When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
(PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A)

Size & weight

Width: 542 mm / 21-3/8 inches
Depth: 271 mm / 10-11/16 inches
Height: 80 mm / 3-3/16 inches
Weight: 4.8 kg / 10 lbs. 10 oz.

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

Outfitted with algorithms from the flagship MD-500, the MD-200 Modulation delivers an array of world-class effects in one small, convenient pedal. Twelve different modes provide every mod sound you need and more, and each includes customized controls that unlock deep tone shaping right from the panel. And with the powerful insert function, it's simple to patch in drive pedals and other effects for selectable pre or post processing.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current MD-200 system software.

Twelve Mod Essentials in One Pedal

Compact and mighty, the MD-200 gives you every key mod effect in a minimal footprint. Modern and vintage BOSS chorus effects are included, plus phaser, flanger, rotary, vibrato, and tremolo. Classic vibe and '70s phaser effects are also available, complete with selectable distortion for added versatility. BOSS's famous Slicer delivers lots of cool rhythmic grooves, while the rich Overtone effect dishes up fat octave tones and unique sonic colours. There's a highly adjustable auto wah as well, which can double as a foot wah when an expression pedal is connected.

Dial in Sounds Fast

With the MD-200's simple and direct interface, it's easy to craft inspiring sounds in the heat of the moment. Using dedicated controls, you can quickly dial in rate, depth, and level for any selected mode. You can also tap in the rate with a footswitch while playing, and visually set note subdivisions right from the panel. Going further, three additional parameter knobs dynamically change functions with each mode, providing extended tone shaping with no need to menu dive.

Save and Recall Your Favourite Setups

The MD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall. And if you crave deeper control, setups can be directly recalled via program change messages from an external MIDI device.

Instantly Change Effect Order for Optimum Tone

Using the MD-200's insert loop function, you're able to patch external pedals, set the ideal effect order, and save the setting to an onboard memory. For example, you can place a phaser or classic vibe before an external pedal in one memory, a chorus or flanger after in the next, and then switch between them. This is particularly useful with drive pedals, where the signal order can have a dramatic effect on the selected mod sound.

Deep Real-Time Control

By default, the MD-200's multi-function footswitches control bypass, memory scrolling, and tap tempo, but you can easily reassign them to alternate functions as needed. External control is also possible via footswitches or an expression pedal, and MIDI I/O is even provided on space-saving mini TRS jacks. Via MIDI, you're able to chain multiple 200 series pedals and select memories on all of them at once, and also control various functions from MIDI devices like the ES-8 and ES-5 effects.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes:12 modes; CHORUS, CE-1 CHORUS, FLANGER, PHASER, VINTAGE PHASER, CLASSIC VIBE, VIBRATO, TREMOLO, ROTARY, AUTO WAH, SLICER, OVERTONE
Memory: 127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohm
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohms
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/TAP switch, MODE knob, RATE knob, DEPTH knob, E. LEVEL knob, PARAM 1 knob, PARAM 2 knob, PARAM 3 knob, TAP DIVISION button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: TAP DIVISION indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack

USB port: USB micro B-type (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 225 mA
Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately)
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight
Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height (including rubber foot)65 mm 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery)680 g / 1 lb 8 oz

0 dBu = 0.775 Vrms

Notes: Dial in Professional Sounds in Seconds

The BOSS ME series has been a favourite of performing guitarists for over three decades, combining multi-effects power with intuitive hands-on control for crafting tones in seconds. The ME-90 is the most advanced ME model to date, offering exceptional audio quality, flagship-grade AIRD amp models, IR loading, an effects loop, and more. Compact, battery-powered, and filled with premium BOSS tones, this versatile all-in-one processor makes it easy to build customized sound setups for every playing situation.

Fast Sound Creation

With its knob-driven interface and diverse effects selection, the ME-90 lets you build configurations and tweak tones with the ease of a stompbox-filled pedalboard-without the hassle of fastening tape, power distribution, and multiple connection cables. Just dial up an amp model or effect type within a category and turn the knobs to get the sound you want. There are 36 preset patches with ready-to-play pro tones, plus 36 user patches for storing your custom creations.

Flexible Real-Time Control

The ME-90 features eight footswitches with smooth, quiet operation and an expression pedal with an integrated toe switch. Use Memory mode to call up complete patch setups with the footswitches, and then switch to Manual mode for direct on/off control of each effect category within the patch. The footswitch LEDs light in different colours for quick identification in the heat of a performance. It's also possible to set all LEDs to light in a fixed colour for each mode if desired.

High-Quality BOSS Effects

The ME-90 puts a massive library of BOSS effects at your command, offering seven different categories filled with selections derived from the flagship GT-1000. Everything you need is here, from overdrives and distortions to pitch/mod effects, delays, and high-quality reverbs. You also get 11 dedicated Pedal FX, a looper, and specialized effects such as acoustic simulation and down tuning. There are 60 effect types in total, with access to over 20 more via BOSS Tone Studio. A send/return loop is available for external pedals, complete with the ability to save the on/off status in patches and place the loop before or after amp models in the signal chain.

Premium Amp Sounds with AIRD Technology

Along with its effects, the ME-90 includes amp models ported from the GT-1000, driven by our advanced AIRD technology for authentic tube tone and touch response. Eleven onboard amp types offer everything from clean combo sounds to punishing high-gain stacks, and you can access more selections in BOSS Tone Studio. Each amp includes a dedicated cab sound for connecting to a PA or recording device, and you can load three of your favourite speaker IRs to personalize sounds to your taste.

Edit, Customize, and Expand

BOSS Tone Studio for macOS and Windows extends your creative range, allowing you to edit tones and change out some amp and effect types with alternate selections. In addition, you can save and organize patches for different gigs, download pro setups at BOSS Tone Central, and swap patches with the ME-90 community on BOSS Tone Exchange. The ME-90 also supports the optional Bluetoothr Audio MIDI Dual Adaptor, enabling you to stream music from a mobile device and wirelessly shape tones using the dedicated BTS editor app for iOS and Android.

Light, Durable, and Ready to Travel

The ME-90 is lighter than its previous generation model while maintaining the rock-solid durability that BOSS is famous for.

Specifications
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 32 bits
Processing: 32-bit floating point
Effects: 97 Types
Memories: 36 (User) + 36 (Preset)
Phrase Loop: 38 sec. (MONO)
Tuner Internal Detection: +/-0.1 cent
Nominal Input Level: INPUT: -10 dBu, RETURN: -10 dBu
Maximum Input Level: INPUT: +7 dBu, RETURN: +7 dBu
Input Impedance: INPUT: 1 M ohm, RETURN: 1 M ohm
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu, SEND: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater, SEND: 10 k ohms or greater

Controls:BANK DOWN/AMP switch, BANK UP/EQ switch, CTL/REV switch, MEMORY/MANUAL switch, 1/COMP switch, 2/OD/DS switch, 3/MOD switch, 4/DELAY switch, PEDAL FX switch, Gt. AMP/LINE switch, POWER switch, EXIT button, WRITE button, CTL button, EDIT button, PREAMP TYPE knob, GAIN knob, BASS knob, MIDDLE knob, TREBLE knob, LEVEL knob, REVERB knob, COMP/FX1 TYPE knob, SUSTAIN/SENS/-1OCT knob, ATTACK/TONE/-2OCT/DEPTH knob, LEVEL/PEAK/DIRECT knob, OD/DS TYPE knob, DRIVE knob, TONE knob, LEVEL knob, MOD TYPE knob, RATE/KEY knob, DEPTH/HARMONY knob, E.LEVEL/RESONANCE knob, DELAY TYPE knob, TIME knob, FEEDBACK knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob, PEDAL FX pedal
Display: 7 segments, 2 characters (LED)

Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
PHONES jack: Stereo miniature phone type
USB COMPUTER port: USB Type-C(R)
Bluetooth ADAPTOR connector: Dedicated connector
DC IN jack

Power Supply: Alkaline battery (AA, LR6) x 4 or AC adapter
Current Draw: 190 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 6.5 hours
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: STARTUP GUIDE, Alkaline battery (AA, LR6) x 4, Leaflet "USING THE UNIT SAFELY"

Options (sold separately)
AC adaptor: PSA-S series
Bluetooth(R) Audio MIDI Dual Adaptor: BT-DUAL
Carry Bag: CB-ME80,CB-BU10

Size & weight

Width: 443 mm / 17-1/2 inches
Depth: 220 mm / 8-11/16 inches
Height: 67 mm / 2-11/16 inches
Maximum Height: 93 mm / 3-11/16 inches
Weight(including battery): 2.9 kg / 6 lb / 7 oz