ダンスミュージック検索結果

Notes: The 0HP Butt0n from Mystic Circuits is a deceptively useful yet simple entry into the 0HP modular line. Two buttons that work in tandem to create a variety of switching behaviours. Use either the latching or momentary button to activate or deactivate two connected signals. Some clever routing also allows the latching button to change the momentary button from normally open to normally closed. Similar signal paths to Mystic Circuits' 0ttenuator module allow both channels to be used separately, two signals to be mixed together or one signal to be sent to two destinations.

Notes: Dont let the name fool you, this module is quite a bit more than just an envelope. ePatch in a gate and your output will behave as a normal sustain- release envelope, staying high while the gate is high and slowly decaying once it goes low. Patch in audio and you have an envelope follower, extracting amplitude data from whatever signal is coming in. Patch in any positive control voltage and you have a slew, adding glide whenever the incoming voltage falls. All three modes boast voltage control over the release/ response time and can use the on board input mult to either daisy chain multiple envelopes or to extract amplitude data from an audio input and then send the audio somewhere else. Possibly Mystic Circuits' most useful 0HP module yet.

Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of Mystic Circuits' fabulous rare colours. With a robust line of modules planned in the future, full DIY kits and an open hardware licence we aim to make modular synthesis accessible and fun for the veteran and new user alike.

Notes: An audio filter in a tiny package! A blend between Mystic Circuits' "AND - gate" and their "Vactrol Low Pass Gate" circuits, the cutoff frequency can be modulated at audio rate. It also features a voltage controlled clipping circuit which allows for further wave shaping. The response of this circuit is much faster than that of the Vactrol Low Pass Gate, so it will react to very plucky envelopes and even triggers.

Whether you need some extra utilities for your studio behemoth or you need to save space on the road, 0HP gives you options. Mystic Circuits' modules come as a small circuit board mounted to a colorful piece of laser cut plexiglass, with a small chance to get one of their fabulous rare colors. With a robust line of modules planned in the future, full DIY kits and an open hardware license we aim to make modular synthesis accessible and fun for the veteran and new user alike.

Notes: This is a 5 pack of 60cm/23.5" TRS cables with male 3.5mm minijacks on either end, and the 1010music logo printed on the jacks.

Use these cables to connect your 1010music Eurorack modules to other modules that also use stereo minijack connections. The cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.

Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.

Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 60 cm / 23.5"
Pack size: 5 Pack

Notes: You can now update your Bitbox mk1 or mk2 with a black faceplate. Now you can have an all black rack and have digital sampling capabilities. This is just the faceplate.

Give your module a facelift

These replacement faceplates are designed for use with the module in the traditional orientation with the screen on top. These are the same faceplates used when manufacturing our modules, but now in black. They are anodized aluminium with a bead blasted finish.

Swapping out a faceplate is easy to do, and requires a small wrench or pliers. Here are the steps to replace a faceplate:

Remove the module from the rack.
Use a small wrench or pliers to remove the small round nuts around each of the mini jacks. Note that these nuts have a notch on the top side of them. This notch fits into a specialized tool that can be used to remove these nuts more easily.
Gently tug on the four knobs to pull them off.
Use a small wrench or pliers to remove the hex nuts from the knob stems.
Remove the washers from the knob stems.
Gently pull up on the faceplate and it will slide off easily.
Place the new faceplate on the module.
Replace the washers on the knob stems.
Use a small wrench or pliers to replace the hex nuts on the knob stems.
Use a small wrench or pliers to replace the small round nuts around each of the mini jacks. Note that the notch should be on the top side of the nuts, the side away from the faceplate.
Look at the underside of the knobs and the post that they rest on. You will see that the knobs are keyed. Line up the flat edge of the hole in the knob with the flat edge of the post, and then push the knob onto the post. If you have the knob aligned properly, it should go on with moderate pressure. If it seems to require more force, please check the alignment.

Weight: 0.19 lbs
Dimensions: 5.5 × 5 × 0.25 in
Touchscreen product: bitbox, fxbox, synthbox, toolbox

Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.

Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.

Notes: Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.

Notes: Power brick for powering Pods. One power brick can power up to 10 typical Pods. Pods can be daisy-chained using a Barrel Cable or Long Barrel Cable.

15-20V / 90W / 2.1mm Barrel Plug (5.5mm outer diameter) / Positive Centre.

Compatible power bricks are available wherever ROW POWER modules are sold. You also may use your own power brick if it meets the following requirements:

- 15V to 20V DC
- Positive centre 2.1mm barrel plug
- Minimum 30W output power
- Low-noise output
- Compatible with an IEC C5 cable

Please note: IEC cable not supplied

Notes: Bus Sticks are low-profile, small footprint power distribution boards for powering up to 13 modules using shrouded (keyed) headers. Simply connect to a Row Power module using the included cable. Attaches to your case using adhesive pads (included) or by drilling and screwing.

Notes: This book is about synthesis, the underlying technical specifications with added interviews of artists and manufacturers.

Sound Synthesis, Oscillation and Waveforms, Wavetables, Samples, Filters, Distortion, Resonators, Amplification, Effects, Modulations, Envelopes, LFOs, AM, RM, FM, PD, Arpeggiators, Sequencers, Modularity, Jacks, Racks, Voltages, Gates, Clocks, Triggers, CVs, Interfaces, MIDI, Analog, Digital, Hybrid- & Software-Designs, Polyphony, Literature, Rhythm Sources and much more.

In other words, all you want to know for a good start into the worlds of patching your own sound ideas with Modular Synthesizers, conventional Synthesizers and Software Synthesizers!

Full color print, 300 pages, English language

Notes: The 2CVADD-HQ is a dual precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.

The module offers three CV inputs for each of the both units; the first unit has an additional fourth input where the CV is subtracted - meaning "transposition downwards".

If you would like to have transposition buttons to shift by one or two octaves (or a free offset), take a look at the CVADDER-HQ module.

Notes: 2TONE is a dual bass-treble tone control, that is a quite useful companion for the MIXCONSOLE, to shape the overall spectrum of individual signal paths.

Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.

Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.

Notes: The MIXCONSOLE JACKOUT is an extension for the MIXCONSOLE with 1/4" (6.5mm) jack sockets for master left/right output and for the FX send and returns - all via mono sockets (unbalanced). This avoids the need for separate adapter cables.

The module is connected via a small internal connection cable to the right of the MIXCONSOLE or as neighbour of the MIXCONSOLE XLROUT module.

Notes: The NYLE FILTER is an adaption of the Steiner Filter for the AE modular palette. It contains the classic filter curves lowpass/highpass/bandpass with adjustable filter frequency and resonance. The unique feature of this filter type is, that there are separate inputs for lowpass/highpass/bandpass (not separate outputs as with other filters). This allows quite unusual sounds, if different signals are fed into the different inputs.

Each input has its own attenuator; for frequency CV control there are two inputs with individual attenuators. Additionally, the resonance can also be CV controlled!

The sound goes from quite soft filtering with low resonance setting to a quite intense resonance peak to full self-resonance.

Notes: On-ear memory foam cushions covered with REPREVE®, a soft, lightweight and comfortable performance material with low isolation. Made from high quality fibers from recycled materials including plastic bottles. Emphasises midrange detail for a well balanced sound profile.

Notes: Neon straight 1.2m thermo plastic cable with a one button remote and inline microphone. Compatible with most smartphones.

Notes: Coiled neon yellow 1.5m thermo plastic cable with soft touch surface. Extends up to 3.2m. Perfect for DJing or small studio use. Comes with 1/4 to 1/8 screw-on adapter.

Notes: Still one of the best value pad controllers on the market, Akai's trusty LPD8 offers eight MPC-style pads and eight rotary controls. Simple, effective and compatible with most hardware and software.

Supplier's Notes:
Premium pad performance

Great things come in small packages and the the LPD8 delivers in a big way. The sleek MIDI pad controller features 8 velocity-sensitive RGB pads from the flagship MPC X and is up to any pad performance-based duties for the modern beat-making music producer. Produce beats, trigger one-shot samples and loops, or connect to any general MIDI-based DAW for easy hands-on controlling and creation.

Legendary pad performance

LPD8 features the same pads from the top-of-the-line MPC X standalone hardware. The sturdy yet super responsive pads are the standard for any music maker looking for dynamic performance without compromising creativity.

Assignable knob controls

LPD8 features 8 assignable rotary knobs for precise control of parameters and values in your DAW. Adjust reverb or delay wetness, dial in parametric eq, trim loops and samples, and so much more with the accuracy you need for your music creation workflow.

Sleek compact design

LPD8 fits in wherever you need it. Sit it on your desk, neatly against your laptop computer for a streamlined process, or pack it into your producer bag with your headphones and accessories ensuring you're always ready to create anywhere.

MPC plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Controls:

(8) velocity-sensitive, RGB-lit pads
(8) 270- knobs
(4) UI buttons

Programs: 4 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 12.1" x 3.2" x 1.3" / 306 x 81 x 34 mm
Weight: 0.86 lbs./0.39 kg

Notes: Updated version of Akai's much-loved mini keyboard controller. Second-generation model gets a visual makeover plus updated keybed for improved playability. Superb value.

Supplier notes:
Mini keys, major performance

The LPK25 is the perfect companion for piano and keyboard-playing musicians everywhere. When inspiration calls, this sleek 2-octave MIDI controller makes for easy composing and creating in even the tightest spaces while still delivering an incredibly responsive experience.

A real controller for a real creation

LPK25 features the revolutionary Gen 2 Dynamic keybed which premiered on the legendary MPK mini mk3 MIDI controller. The keys offer an exquisite playing experience with careful attention to velocity response. Whether you're playing a gentle upright piano, a super synthesizer plugin, or triggering notation into your favourite composition software, LPK25 becomes a natural extension of your creativity, ensuring you won't miss a beat.

Built-in clock and arpeggiator

The onboard arpeggiator and clock make for powerful control of any destination, whether software instrument, hardware device, or USB enabled modular gear, all via a single USB cable.

Compact production partner

When not in use, LPK25 stores away quickly and neatly until your next creative session. Pack it in your everyday carry bag and keep it handy for use with your laptop, smart phone, or tablet.

MPC Plugin instruments

Innovative sampling and efficient sequencing are only a part of the iconic MPC experience. MPC Beats also features a great selection of ground-breaking MPC plugin instruments. Discover Tubesynth, Bassline, and Electric plugin instruments for a wide range of synth, monophonic leads and basses, as well as pads, electric keyboard sounds, and much more for rich musical productions and arrangements.

Insert effects

MPC Beats includes a premium collection of world-class mixing and mastering plugins. Powerful insert effects like Half Speed, Mother Ducker, and AIR Talk Box add instant vibe and character to your tracks to quickly achieve modern sound and feel. Process audio, dial-up creative effects, and finalize your tracks to commercially ready songs for sharing anywhere.

Key specs

Keyboard
25 keys, velocity-sensitive
10-octave range (127 MIDI notes)

Arpeggiator
Range: 1-4 octaves
Modes: Up, Down, Exclusive, Inclusive, Order, Random, or Latching
Time Divisions: 1/4-note, 1/4-note triplet, 1/8-note, 1/8-note triplet, 1/16-note, 1/16-note triplet, 1/32-note, or 1/32-note triplet
Tempo: 30-240 BPM via Tap Tempo button (internal sync). Based on software tempo (external sync)
Swing: 50%, 55%, 59%, 61%, or 64%
Programs: 8 stored programs, configurable via free downloadable editor software
Connections: (1) USB port
Power: Via USB
Dimensions (width x depth x height): 13.7" x 4.0" x 1.5" / 348 x 102 x 38mm
Weight: 0.99 lbs. / 0.45 kg

Notes: Custom ALM finger friendly case mount screws sized M3 with a 6mm depth.

No screwdriver necessary - makes your daily case rearranging ritual even easier!

These low profile and stylish screws stay out of hands way and will fit underneath a Decksaver lid with ALM cases.

Available in boxes of 100 screws.

Notes: The Blackbox and Bluebox gives you complete recording and mixing capabilities in the palm of your hands. With a portable sampler and mixer this powerful, you're going to want a case to protect it while you're on the go.

The GLIDE case for the Blackbox and Bluebox is custom molded to fit perfectly, exactly without taking away from the amazing portability of the device. The high resolution touch screen on the Blackbox and Bluebox are great for writing full songs or applying effects with a minimal design, so a case that prevents any scratches or cracks will be a lifesaver.

The GLIDE Case is made of durable and stress tested EVA material, which will prevent any damage from drops or spills, and it also features an interior pocket to hold any cables for recording in the wild.

Custom designed for the 1010music Blackbox and Bluebox

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 6.25 x 5.5 x 1.5

Notes: Taking your creativity on the go is easy with our PULSE Case for the Akai MPC Studio 2! With a rigid exterior made from molded EVA material and a plush velvet interior, you can feel confident knowing your MPC Studio 2's LCD screen and touch-sensitive pads are totally protected. This ultra-compact and totally flat case will pack easily into your backpack, so you can use the entire world as your studio!

Description

These PULSE cases are made from a durable EVA material that is custom molded to your Akai MPC Studio 2. This secure fit will prevent your MPC from shifting and moving if you throw your case into your backpack or luggage when you're on the move.

The nylon strap makes carrying this case a breeze and the secure fit will prevent your MPC from shifting and moving as you throw your case into your backpack or luggage.

The interior of the PULSE case features a mesh pocket for storing extra cables or notes. The case is also lined with high-quality, soft velvet. This ensures that the sleek exterior, LCD screen, and pads are protected as you move.

Specifications

Custom molded to the Akai MPC Studio 2
Made from a lightweight and durable EVA material
Internal storage pocket for extra cables
Lightweight and easy to carry
Exterior: 14.76 x 8.46 x 2.56

Notes: Whether you're recording vocals, voiceover, or a podcast, don't leave home without the new GLIDE Case For The Audio-Technica AT2020 / AT2020USB+! This lightweight and durable, molded case will provide excellent protection for your microphone. The customized die-cut foam insert matches the exact dimensions of the AT2020 and accessories, so you can be confident that your mic is totally secure while you're on the move!

Description

The GLIDE Case is made using a high-quality and lightweight EVA material used in performance sports equipment. The case is molded to perfectly house the Audio-Technica AT2020USB+, which complements the compact design and small footprint.

To keep everything together, we've also included a pocket inside the top lid to store cables or notes so you can keep everything together. Your AT2020USB+ will travel safely and in style with the soft velvet interior and the durable EVA exterior. Make the most out of your portable setup with the GLIDE Case For The Audio-Technica AT2020USB+!

Specifications

Perfect fit for your Audio-Technica AT2020USB+ and accessories
Space for the collapsable tripod
Made of durable and lightweight EVA material
Soft, velvet-lined interior
Exterior: (8.07 x 7.13 x 2.91) Inches

Notes: Keep your headphones safe for many sessions and gigs to come with the PULSE Case For Studio Headphones! This durable molded case can fit any model of professional studio monitor headphones from Beyerdynamic, Sennheiser, Shure, Sony, Audio-Technica, and other leading brands. Like all PULSE cases, this case is compact and ultra-lightweight, so it's easy to travel with.

Description

The PULSE Case for Studio headphones is made from durable and lightweight EVA, designed to protect and preserve your headphones during transport. EVA is often used in sports equipment for its shock-absorbing capabilities, so you be confident your studio headphones will be well protected. The case's interior is lined with soft velvet, which will help prevent scratches and any snags on your headphones.

The PULSE Case For Studio Headphones is a universal case that can fit any professional studio monitor headphones. This includes the most popular models from Beyerdynamic, Sony, Sennheiser, Shure and more!

Specifications

The perfect size to fit most professional studio headphones
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions: 8.62 x 6.69 x 4.09 inches
Exterior dimensions: 9.65 x 7.48 x 4.33

Notes: The Critter & Guitari Organelle M is an extremely mobile machine. This GLIDE case has been custom molded to fit and protect your Organelle M when you're on the go.

Description:

Made to easily fit into a backpack or suitcase, this case provides real protection. The exterior is rigid, and is topped with waterproof faux leather, while the interior features a soft velvet lining. There's even an interior pocket for storing your cables. With a snug fit, you won't need to worry that your Organelle M could be dislodged during transport.

Specifications:

Perfect fit for your Critter & Guitari Organelle M

Premium faux leather exterior and soft velvet lining

Mesh compartment for holding cables

Interior dimensions: 13.5 x 3.5 x 2.5 inches

Notes: A portable interface needs a secure and mobile case! The compact GLIDE case features a soft, velvet-lined interior to keep your 2i2 looking new, and you'll have plenty of room to store cables in the mesh compartment built into the lid. The compact GLIDE case is designed to keep the footprint of your 2i2 small and lightweight while protecting your gear.

Description

The GLIDE case for the Focusrite 2i2 is custom molded to fit your interface perfectly without taking away from its portability. The case is made from the durable EVA material designed to protect your interface when you throw it in your backpack or carry it to and from your session.

The interior of the GLIDE case features a mesh pocket for storing any extra cables you might have. The soft, velvet-lined interior will protect the sleek exterior of the 2i2 while keeping the knobs and inputs safe from knocks and debris. Become as portable as you need to be while knowing your Focusrite 2i2 will be looking good as new!

Specifications

Custom molded to the exact dimensions of the Focusrite 2i2
Separate storage pocket for cables
Durable EVA exterior
High-quality, velvet-lined interior
Interior: (7.68 x 4.09 x 2.2) inches
Exterior: (8.19 x 4.92 x 2.68) inches

Notes: PULSE Case for Korg Drumlogue

Looking for a way to keep your KORG Drumlogue drum machine protected on the go? Look no further than our PULSE case. Specifically designed to fit the Drumlogue and its power supply, this case is the ultimate solution for traveling musicians who want to keep their gear safe.

Crafted with a super soft velvet interior, the PULSE case will protect the wooden side panels and sleek aluminium exterior of your Drumlogue from scratches and other damage. Additionally, a handy mesh pocket is included to store any extra cables or accessories you may need for your performances. Don't risk damaging your gear - keep your Drumlogue safe and sound with the PULSE case.

Description

Inside the case, you'll find a luxurious velvet-like material that will keep your gear safe and snug. On the outside, the case is made from durable EVA that holds its shape, so you can be confident that your equipment is well-protected.

Thanks to the handy moulded rubber handle, transporting this case is a breeze. Plus, its compact size makes it easy to tuck into a larger backpack or suitcase when you're on the move.

Designed to accommodate your Drumlogue and power supply, this case has everything you need to create music on the go. And with a roomy interior pocket, you'll have plenty of space for cables and other essential accessories.

Specifications

Perfect fit for your Drumlogue + cables
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Interior dimensions 14.96 x 7.32 x 3.15 Inches
Exterior dimensions 15.94 x 8.86 x 3.39 Inches

Notes: The new PULSE Case For The Korg SQ-64 is the ideal solution for protecting your SQ-64. If you're transporting your SQ-64 to a live performance or just performing with friends, you'll feel confident stepping into any environment with the PULSE Case for the SQ-64.

Description

The PULSE Case has been custom-designed to fit form to the exact dimensions of the Korg SQ-64. Made out of a molded EVA material, the PULSE case will protect the knobs, screen, and pads during transport.

The PULSE cases interior is lined with black velvet material to prevent any scratches on the screen of your SQ-64. The PULSE Case also includes a mesh pocket for storing any additional USB or patch cables you might have. If you're throwing your sequencer in your backpack or stepping out into the live environment, the PULSE case is the logical sequence in protecting your SQ-64.

Specifications

Perfect fit for your Korg SQ-64
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded interior
High-quality black velvet lining
Exterior: (15.04 x 5.71 x 1.97) Inches

Notes: The GLIDE Case for the PreSonus Studio 24c is the ideal solution for keeping your audio interface safe and protected. The custom-molded design and velvet-lined interior provide exceptional protection when you're on the go. When you need to pack up and move at a moment's notice, you can be confident that the GLIDE case will keep the knobs and inputs of your Studio 24c safe from any bumps or falls!

Description

The GLIDE case is molded to the exact dimensions of the PreSonus Studio 24c. This means your interface will be secure inside the case without shifting or moving during transport. The interior is lined with soft velvet to keep your Studio 24c safe from any scuffs or scratches. We have also included a mesh pocket for extra cables.

The exterior of the GLIDE case is made of a durable and stress-tested EVA material. This will protect the inputs and knobs of your Studio 24c from any unintended drops or spills during transport.

Specifications

Custom designed for the PreSonus Studio 24c
Durable EVA exterior
Soft, velvet-lined interior
Mesh compartment for holding cables
Interior dimensions: (7.44 x 6.5 x 2.05) Inches
Exterior dimensions: (8.19 x 7.28 x 2.44) Inches

Notes: With the Roland MC-101, you can produce music anywhere, anytime. Keep your unit protected while you're on the move with this durable and lightweight GLIDE case.

Description:

Custom-molded to fit the MC-101 or TR-6S, this case will provide the protection you need. The exterior is rigid and waterproof, while the interior is lined with soft velvet. Made from high-quality, premium materials, you'll never have to worry about your MC-101 while it's in our GLIDE case.

Specifications:

Custom designed for the Roland MC-101 or TR-6S

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 9.75 x 5 x 2 inches

Exterior dimensions: 10.5 x 6 x 2.75 inches

Notes: You can now carry your mic with style thanks to the GLIDE Case For The Shure Super 55! Analog Cases have created the ideal case for one of the music world's most recognizable microphones so that you can transport and protect the Super 55 with ease. The GLIDE Case For The Shure Super 55 has a custom die-cut foam insert that matches the exact dimensions of your microphone, so you can be confident your investment is secure during transport!

Description

The GLIDE case is made of a durable, molded EVA material that will protect your Shure Super 55 from any knocks and falls. The GLIDE Case has been custom fitted to the exact dimensions of the microphone, with a die-cut padded foam insert to keep your Super 55 secured and cushioned when you're on the go.

The interior is lined with black velvet material to prevent any scratches on the classic-looking, sleek exterior of your Super 55. Whether you're packing down from a podcast or hanging your microphone from the roof, keep your Super 55 safe and portable in the GLIDE case!

Specifications

Perfect fit for your Shure Super 55
Die-cut foam interior to secure your microphone
Made of durable and lightweight EVA material
Soft, velvet-lined interior
Exterior: (10.63 x 6.3 x 2.56) Inches

Notes: If you own a portable recorder, a lightweight and compact case to transport it is a must! The molded EVA exterior and soft, velvet interior of our GLIDE case will keep your DR-40X clear of debris and the LCD screen clear from any scratches. Whether you're recording a concert, doing some field recordings, or recording directly in from an external source, keep your TASCAM DR-40X in pristine condition in our GLIDE case!

Description

The GLIDE case is made of a durable, molded EVA material that will help to protect your DR-40X from any knocks and falls. The GLIDE Case has been custom fitted to the exact dimensions of the TASCAM DR-40X, keeping your recorder totally secure during transport.

The GLIDE Cases interior is lined with black velvet material to prevent any scratches on the screen of your DR-40X. The GLIDE Case also includes a mesh pocket for storing any additional cables or recording notes you might have. From recording front of house at the show to the ambiance of the trail, the GLIDE Case is the ideal solution for protecting your TASCAM DR-40X.

Specifications

Custom designed for the TASCAM DR-40X
Durable molded EVA exterior
Super-soft velvet lining
Interior dimensions 8.07 x 3.74 x 2.36 inches

Notes: Branded Analogue Solutions LED Jack Pins.

These will light red / green as the signal swings from a positive to negative voltage.

Use the for diagnostics - or, just because they look cool (especially in the dark!)

The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty - they have practical advantages too!

Help seeing what's going on in the dark!

Help diagnose signal flow.

Notes: Protect your Orba with this impact-resistant softshell case, made from durable EVA plastic foam, and lined with soft fabric. Beneath the zippered lid is a compartment for your charging cable, and there's a lanyard for carrying or clipping the case to your backpack.

Notes: The perfect companion to MicroFreak's Vocoder engine. This specially designed microphone attachment lets you add your vocals to MicroFreak's unique mix of digital and analog.

Transform your toplines, harmonies, and spoken word into inspiring modulated textures.

With its gooseneck design, this electret microphone is built with ergonomics and ease of use in mind. Adjust its height and angle to suit your setup, and connect it directly to MicroFreak's head-phone connector. Thanks to an additional socket on the microphone's base, you can still connect your headphones for monitoring.

In terms of sound, the microphone is designed to work perfectly with the MicroFreak Vocoder engine's 16-band frequency range, ensuring accurate detection of the complex harmonics of the human voice. MicroFreak will detect when the mic is connected and automatically set the gain, but this can be easily adjusted in the utility menu.

Jump from subtle synthesized harmonies to robot vocals in no time with the MicroFreak Vocoder Microphone!

Notes: The custom designed AT8175 microphone pop filter clips onto the front of the mic to provide added protection against plosives. Designed to fit 20 Series vocal microphones.
The AT8175 is compatible with the following microphone models: AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+

Features

Microphone pop filter clips onto the front of the mic.
Perforated steel mesh design allows for passage of clear speech and adds protection against plosives.
Compatible with the following 20 Series vocal microphones: AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+.

Specifications

Dimensions 74 mm (2.9") × 63 mm (2.5") × 88 mm (3.5") (W × D × H)
Weight 31.1 g (1.1 oz)

Notes: ***B-STOCK: Box opened, product in perfect working order***


Enter the Behringer CP35 ATTENUATORS Module. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The CP35 features 4 passive attenuators with linked inputs and 4 separate outputs. Each attenuator knob can be used to adjust the level of the input signal passively from - 8 to unity gain. Connecting a single signal to the first input will allow it to pass to all 4 outputs to have up to 4 variations of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 and 4 leaving input 1 to feed out of output 1. Having multiple inputs allows you to attenuate 4 separate signals and be more flexible with your tone.

Along with the standard outputs, the CP35 also features 6-volt outputs. These outputs give a reference voltage of -6 Volts out of one pair and +6 Volts out the other. Also included are two banks of 4-point multiple circuits for you to be able to route multiple copies of input signals to other modules. The CP35 can be a powerful addition to your synthesizer rig by allowing you to have multiple sources output to multiple modules so you can shape and sculpt sounds that are sure to blow everyone away!

Installing the CP35 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP35 to be mixed with other synth modules for a truly unique set up.

Notes: Replacement coiled cable with gold-plated 3.5mm mini plug and 6.35mm adapter, for DT 250-series headphones.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Bring your Eurorack performances to life with the 2HP wide 4Ch mixer, perfect for mixing signals in your modular system. This compact yet powerful module is a must-have for anyone who wants to design their soundscapes with precision and flexibility. Whether you want to mix audio, CVs, or both, our 4Ch mixer gives you the freedom to fully unleash your creativity.

Space-saving design

With its slim design of only 2HP, this blender fits seamlessly into any Eurorack setup without taking up much space.

Four Channels

Equipped with four independent inputs, this mixer allows you to mix a variety of signals at the same time. Perfect for complex sound structures and experimenting with multi-layered soundscapes.

Intuitive operation

Each of the four channels has its own volume control, allowing you to quickly and easily adjust the mixing ratio. This way, you always have full control over your audio.

Flexibility of use

Although compact, this blender is incredibly versatile. It can be used for both audio and CV signals, making it a versatile tool for all kinds of musical experiments.

High sound quality

Despite its small size, the mixer offers excellent sound quality with no audible loss or distortion, so you can be sure that your music will sound exactly as you intended.

Notes: Bring the rhythm of your dreams to life with the 2HP wide Eurorack compatible Clock Divider. This compact but powerful module has been carefully designed to control your rhythmic arrangements with precision and flexibility. Whether you want to create complex rhythmic patterns or just sync your Eurorack modules, our Clock Divider is the perfect solution for any synth lover.

Space-saving design

With its narrow width of only 2HP, this clock divider fits seamlessly into any Eurorack setup without taking up a lot of space.

Versatile partial ratios

Equipped with four outputs for 1:2, 1:4, 1:8 and 1:16 ratios, this module offers you a wide range of rhythmic possibilities. From simple halvings to complex rhythmic structures, you can structure your sounds exactly the way you want them to.

Intuitive visualization

Each of the four outputs, as well as the input clock, are equipped with an LED that gives you immediate visual feedback. This feature makes it easier for you to grasp and adjust the rhythmic structure of your performance or track at a glance.

Reset Input

The handy reset input allows you to reset the divider cycle at any time. This is especially useful for controlling your rhythmic patterns in real-time and ensuring that your setup is always in sync, no matter how complex your arrangements are.

Notes: Unlock the endless possibilities of modular signal path control with the revolutionary 2HP wide Dual Voltage Controlled Analog Switch, which can be seamlessly integrated into any Eurorack system. This compact but powerful module is the perfect solution for those who want to control their signal chains with maximum precision and flexibility, without compromising on quality or space.

Dual-channel design

With two independent, voltage-controlled switches in one module, you can maximize your creative possibilities without sacrificing valuable space. Route, sync or share signals with unprecedented simplicity.

Voltage Control

Each channel responds to control voltages, allowing you to dynamically switch between signal paths. This allows for responsive and vivid interaction with your sound, ideal for complex patches and performances.

Compact Efficiency

At just 2HP, this module packs incredible functionality that adds versatile switching options to your Eurorack configuration without losing track.

Intuitive operation

Despite its advanced features, the Dual Voltage Controlled Analogue Switch remains intuitive to use. The clear layout and labeling of the controls make it easy to focus on what's important: your creativity.

Perfect for experimental setups

Whether you're performing live, recording in the studio, or just experimenting with new signal paths, this dual switch opens up new dimensions of sound manipulation. It's the ideal tool to add a new level of dynamic control to your Eurorack system.

Notes: Expand the connectivity options in your Eurorack system with the versatile 2HP Eurorack compatible Passive Multiple. This compact module is an indispensable helper when it comes to efficiently distributing signals within your modular setup. With its intelligent design and two normalized channels, it offers a flexible solution for a wide range of patch requirements.

Space-saving design

With its slim design of only 2HP, the Passive Multiple fits seamlessly into any Eurorack system without taking up much space.

Flexible Signal Distribution

Thanks to the two normalised channels, this module can be used either as a 2x 1->3 multiple for distributing a signal to up to three targets, or as a 1x 1->6 multiple to send a signal to up to six targets. This flexibility makes it a true all-rounder for your patch environment.

Optimized for gate and trigger

The module is specially designed for the distribution of gates and triggers. It allows you to route a signal unchanged to multiple outputs, which is ideal for complex signal paths.

Limited CV signal suitability

Although the passive multiple can also be used for CV signals, it is only suitable to a limited extent due to its passive design. For precise voltage distribution, especially with pitch CV, we recommend using a buffered multiple to avoid signal loss and inaccuracies.

Dimensions
2 HP
14 mm deep

Current Draw
Module does not draw current

Notes: Tap into the world of precise signal processing with the 2HP Eurorack-compatible Precision Rectifier. This compact but powerful module is a must-have for anyone who wants to modify their audio signals with the utmost precision. Not only does it provide rectified solid wave, but it also provides dedicated outputs for the positive half-wave as well as the inverted negative half-wave of the input signal. Perfect for experimental sound designers and creative synth users.

Compact format

At just 2HP, this Precision Rectifier offers a powerful feature extension for your Eurorack system without taking up a lot of space.

Versatile signal processing

Get access to rectified full wave to fully modify your input signal, ideal for dynamic effects and creative signal paths.

Dedicated Half-Wave Outputs

In addition to full-wave rectification, the module offers separate outputs for the positive half-wave and the inverted negative half-wave. This special feature allows you to play with the original character of the input signal and create unique sound textures.

Precise signal processing

The Precision Rectifier is designed for the highest level of accuracy, so you can count on clear and precise signal processing, no matter how complex your requirements are.

Notes: Dive into the world of subtle tone modulation with the revolutionary 2HP Eurorack compatible Slew Limiter. This compact but powerful module is the secret weapon in your synth setup to create smooth transitions between your sounds, giving you the opportunity to expand your musical expression in a unique way.

With its slim design of only 2HP, the Slew Limiter fits seamlessly into any Eurorack system without taking up valuable space.

Create smooth transitions between notes or modulate CV signals to create organic, vibrant effects such as portamento/glide, or complex modulated patches.

Adjustable rise and fall times give you complete control over the speed of signal changes, from instant jumps to smooth, slow transitions. Versatile uses: Whether for smoothing control voltages, creating legato effects for monophonic melodies or for creative sound design - this slew limiter is a true all-rounder.

Thanks to its clean layout and simple controls, you can make the settings you want instantly, making it ideal for live performances and studio sessions.

CV control via rise/fall

A unique feature is the ability to control rise and fall times via external CV signals, allowing you to dynamically react to your performance or patch.

Shape Control

The Shape slider allows you to fine-tune transitions over a wide area. Whether it's a slow exponential increase, linear transitions, or a subtle adjustment through the logarithmic characteristic, it's all at the service of the music