ダンスミュージック検索結果

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Professional 6-channel audio mixer, with DSP effect unit, integrated MP3 player and Bluetooth receiver.

Input channels: 6
Number of mix/mono: 4
No. of stereo: 1
Mic input: 0.6 mV, bal. 4 x XLR
Line input: 80 mV (stereo), 2 x 6.3 mm jack L/R - 7 mV (mono), 4 x 6.3 mm jack
Aux input: 340 mV, 1 x 6.3 mm jack L/R
Master output: 760 mV, 1 x 6.3 mm jack L/R
Effect send: 9 V, 1 x 6.3 mm jack
Headphones: = 8 O, 1 x 6.3 mm jack
USB: yes
Bluetooth: yes
Frequency range: 20-20,000 Hz
THD: < 0.03%
S/N ratio: > 75 dBA
Equalizer bass: i15 dB/80 Hz
Equalizer midrange: i15 dB/2.5 kHz
Equalizer treble: i15 dB/12 kHz
Phantom power: +48 V
Power supply: ~ 230 V/50 Hz/20 VA
Mains voltage: ~ 2 V
Mains frequency: 50 Hz
Power consumption, operation: 20 VA
Admiss. ambient temp.: 0-40 -C

Notes: The Black3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black2 and Green2?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Black3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Black3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Black2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Review: CircoLoco Records is a new record label forged in partnership with the iconic video game creators Rockstar Games. After four editions of colour coded releases, we now have the entire collection of 20 tracks compiled here on one 5xLP package. From the Black edition there's the tunneling techno of Adam Beyer's powerful 'Break It Up', from the Violet edition you have Margaret Dygas' majestic broken beat journey 'Wishing Well', as well as tINI with the neon-lit disco of 'What If, Then What?' featuring Amiture (Green) and Sama Abdulhadi with the steely and hypnotic techno of 'Reverie' taken from the Blue series - plus many more.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Comes with multi-region power supply

Notes: TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user's probability settings. By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you're looking for a controlled random source, or an evolving melody generator, TM has you covered.

Notes: Are you a synth enthusiast looking for the ultimate addition to your setup? Look no further than the Novation Summit - a powerhouse synthesizer that delivers unparalleled sound quality and versatility.

With 16-voice polyphony and dual-filter architecture, the Summit allows you to create rich, complex sounds that are both dynamic and expressive. And with its intuitive interface and advanced features, including dual stereo effects engines and an arpeggiator, the Summit is perfect for both studio production and live performance.

But with a piece of gear as valuable as the Novation Summit, it's essential to protect it from any potential damage. That's where Decksaver comes in! Decksaver's custom-moulded polycarbonate cover is specifically designed to fit the contours of the Summit, providing maximum protection against dust, spills, and accidental impacts.

Crafted from ultra-durable polycarbonate material, this Summit cover is super-tough yet lightweight, ensuring that your precious synth is always safeguarded without weighing you down. So whether you're transporting your Summit to a gig or storing it at home, you can rest easy knowing that it's protected by a Decksaver cover.

Investing in the Novation Summit is a big step for any musician, but protecting your investment is just as important. So why wait? Grab a Decksaver cover today and keep your Summit safe and sound!

Features Decksaver's own Soft-fit inserts to protect delicate wooden cheek panels.

Dimensions

Weight 1.65 kg
Length 101.5cm
Depth 31 cm
Height 5.5cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires, and sunlight.

Review: Swimming by the late Mac Miller, released in 2018, stands as a poignant testament to the rapper's artistic evolution and introspective depth. The album is a sonic exploration of self-discovery and resilience, addressing themes of mental health and personal growth. Miller's introspective lyricism, coupled with lush production and jazzy instrumentation, creates a soulful and immersive soundscape with tracks like 'Self Care' and 'Ladders' showing his lyrical vulnerability and musical versatility. Swimming not only received critical acclaim but also serves as a bittersweet reflection on Miller's artistic prowess and leaving an indelible mark on fans in the process.

Notes: The Flex premium broadcast-style boom arm is a key element to any ergonomically sound, clutter-free setup. An internal spring design and integrated cable routing channel deliver seamless design and operation while remaining visually appealing. Content Creators, Podcasters and Musicians can all benefit from the freedom and efficiency achieved by the Flex. Flex is the perfect solution for many of MXL's most popular microphones like the 770, 990, and BCD-1.

Gone are the days of that clunky boom arm drooping down while trying to record the perfect podcast. Flex's internal suspension system and adjustable weight calibration ensure that your mic will stay put so you can keep your focus on creating. A sleek, modern design allows you to add the functionality of a boom arm without the eyesore of another "thing".

Boom: Extruded Aluminum

Mount: Desktop C Clamp

Rotation: 360 degrees

Max Reach: 32"

Mount thread: 5/8" threading with a 3/8" adapter

In the box:

Flex boom arm
C-Clamp for desktop
3/8" to 5/8" adapter

Notes: Synthrotek's original Mean Screamer Pedal goes way beyond a typical tube screamer clone with a couple of great mods. An original 4558 OP-AMP IC has been used to give it that beautiful classic boost.

Notes: Use the Pico Platform compressor / limiter on any instrument for precise and powerful control of your signal's volume and of course, extended sustain on leads. Add subtle dynamic control to level out peaks and valleys in your signal or give your sound a real squeeze for extra sustain and pop. The Pico Platform is extremely transparent with no tonal colouring, making it extremely versatile and easy to work into your existing set up.

The Pico Platform's control set is simple yet comprehensive. Use the Sustain control to adjust the compressor ratio or limiter threshold for a subtle or extreme effect. The addition of a Blend knob allows for adding seamless sustain while preserving attack and tone. Adjust the Attack control to set when the compressor activates after a transient. Use the Mode button to choose between Compressor and Limiter modes and Soft Knee or Hard Knee compression curves for smoother or more dramatic compression styles.

Studio-style compressor / limiter to precisely tune dynamics
Compressor and Limiter modes for a wide range or compression styles
Selectable Hard Knee / Soft Knee compression curves
Sustain adjusts Compressor ratio or Limiter threshold
Attacks adjusts attack time
Blend adjusts dry/wet ratio
Volume control overall output level
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Zoom H1essential - 32-Bit Float Recording for All

The World's Easiest Recorder, Just Got Easier

With the push of a button the H1essential captures perfect audio for musicians, podcasters, filmmakers, and content creators. Simply hit record and discover the power of 32-bit float.

32-Bit Float Magic

With 32-bit float recording, you never have to adjust levels. The H1essential captures every nuance of your sound ensuring high-quality audio with every take

The First Handy Recorders with Accessibility

The Essential Series was designed with Accessibility for the blind and visually impaired. Navigate the menu with audible descriptions through the built-in speaker or headphones. Creators can choose English, Spanish, French, Japanese, German, Italian or Chinese.

Loud and Clear

The onboard X/Y microphones capture clean audio up to 120 dB SPL, equivalent to the sound of a high-performance engine.

The Perfect Practice Companion for Musicians

Musicians can use the H1essential to record every rehearsal, a great way to improve your playing. Features like overdubbing and playback-speed-adjustment are great for writing and practicing.

Sound Makes the Scene

The H1essential is great for filmmakers. Record and send audio directly to your camera or use it to record sound effects to complete your scene.

For Storytellers

Podcasters can mount the H1essential on a tripod for sit down conversations or use 'mono mode' for on-the-go interviews.

Big Features, Small Package

The H1essential has advanced features such as overdubbing, pre-record, auto record, and playback speed adjustment.

Features

32-bit float recording: perfect audio with no need to set gain
120 dB SPL 90 degree XY Mics
Records up to 96kHZ sample rate
New OLED Display
Overdubbing, auto record, pre-record and timer functions
USB Microphone Function
Audio guidance function for the blind and visually impaired
10 hours of battery life on 2 AAA Batteries or USB-C Bus power

Specs

Inputs

Built-in mic: 90 degree XY stereo format
Directionality: Unidirectional
Sensitivity: -37 dB/1 Pa at 1 kHz
Maximum sound pressure input: 120 dB SPL

MIC/LINE IN jack

Connector: Stereo mini jack
Input impedance: 2 kO or more
Plug-in power: 2.5 V

Built-in mic
90 degree XY stereo format
Directionality: Unidirectional

Outputs

PHONE / LINE OUT jack
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(into 32O load)
Output impedance: 10 O or less
Built-in speaker Type: 20 x 30mm oval dynamic speaker
Practical maximum output: 250mW

Recorder
Recording formats:
WAV
44.1/48/96 kHz, 32-bit Float
Stereo / Mono
BWF and iXML formats supported

Recording media
4-32GB cards compatible with the microSDHC specification
64GB-1TB cards compatible with the microSDXC specification

Display
OLED: 128 x 64

USB
Connector: USB Type-C (Use a USB cable that supports data transfer.)
USB Mic: USB 2.0 High Speed
48 kHz, 24-bit
File transfer: USB 2.0 High Speed

Power

2 AAA batteries Alkaline, Lithium, or Rechargeable NiMH
AC adapter: ZOOM AD-17: DC 5 V/1 A
USB bus power is supported.

Estimated continuous operation time using batteries

Alkaline batteries: About 10 hours
NiMH batteries (800 mAh): About 9 hours
Lithium batteries: About 18 hours
Stereo recording, 48kHz/32-bit float, no headphones, Power Save 1min
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.
They will vary greatly according to use conditions.

Power consumption: 5 W maximum
Dimensions: 53.9 mm (W) × 136.6 mm (D) × 29.0 mm (H)
Weight (including batteries): 92 g
Note: 0 dBu = 0.775 Vrms

Notes: The SlingBag is a medium size bag that holds approximately 50 Vinyl records or a (MIDI) controller, an Audio Interface, a Headphone and cables. A perfect bag for the starting DJ.

It has a pocket on each side and one full size pocket in the front. Next to this the bag features the special steel bolts which make it impossible for grips and straps to break loose from the bag. The SlingBag can be used as a set in combination with the UDG SlingBag Trolley. A perfect size bag for a quick DJ set!

*Photographed records are not included

Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.

Notes: Excellent value from this simple but effective envelope filter pedal. User-friendly controls help you quickly dial in a tone with three different filter modes. Sounds as good on synth as it does on guitar or bass.

Supplier's Notes:
Envelope controlled filter is an effect type that ventures beyond the mainstream yet is equally at home in a wide range of genres and equally effective on guitar, bass, keys, horns and more. Electro-Harmonix is a pioneer in this effect category and has been making envelope controlled filter pedals since the 1970s! The Nano Q-Tron springboards off that deep heritage.

Here's how it works: The Nano Q-Tron responds to the user's playing style and dynamics. The volume of the input signal it receives (also called the envelope) controls the cutoff or center frequency of a swept filter. This allows the Nano Q-Tron to create tone-altering effects ranging from subtle to dynamic, auto-wah to ultra-funky. It's all about how you play and it's super interactive.

Specifications

Circuit: Analog
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 10mA

Notes: Enter a galaxy of rich and vibrant delays. The Dreadbox Nostalgia 3 Stage Delay is a superb effect module that can give you amazing results in moments. Delay is a true staple in the effects world and it can take your modular music to the next level via just a few cables.

The Dreadbox Nostalgia 3 Stage Delay is ideal for a range of modular music styles, from ambient to acid house. This 10HP module fits snugly in your system and has enough CV control to keep even the most avid patcher satisfied.

117 mA +12V
25 mA -12V
35 mm deep
10HP

Notes: A-100SSB is a combination of power supply and bus board with 8 connectors for A-100 modules, planned for applications with up to 8 modules and a max. current of 380 mA.

- Wide range mains voltage input 100-240V AC / 50-60 Hz
- IEC inlet on board for the connection of a suitable mains cable (a suitable mains cable has to be purchased by the customer locally, it's not included with the A-100SSB)
- Switching supply with +12V/380 mA and -12V/380mA for the operation of A-100 modules up to 380 mA total supply current
- Safety cover at the bottom side (covers all elements that lead mains voltage)
- On board fuse
- 8 bus connectors
- LED displays for +12V, -12V and +5V
- Dimensions: about 270 mm (length) x 55 mm (width) x 35 mm (height)
- Several 3mm holes for mounting the unit on a rear panel or bottom plate

Notes: Continuing from the appeal of the G2M and B2M, the i2M Musicport combines the features of both these units (to support both guitar and bass) with an optimised USB interface for even faster MIDI performance. Featuring extended MIDI features and configurability to satisfy the most demanding users, and a high-impedance audio interface that won't suck the tone from your instrument, the i2M Musicport is the new way to connect your musical instruments to your computer.

Designed particularly for guitar and bass, it works with most musical instruments including wind instruments and the human voice. Now you can record great-sounding tracks and play synthesizers and samplers how you have always wanted to: by using your favourite instrument.

Plug and Play

Using class-compliant USB drivers built into your computer's operating system, and with no special instrument set up required, the i2M Musicport offers a true plug-and-play experience for all musicians.

Ultra-Fast Monophonic MIDI Conversion

Although latency is unavoidable when converting musical pitch into MIDI mes-sages, the unique technology used in the i2M Musicport reduces this to a minimum. Not only is the MIDI conversion extremely fast, but accurate and ro-bust. In fact, the pitch-bend detection of the i2M Musicport is more accurate than many popular guitar tuners!

Fine nuances of your playing are captured by the i2M Musicport: note velocity is determined from how hard you play; and subtle vibrato and bends are con-verted to ultra-accurate pitch-bend messages with virtually no latency. Every-thing from the emotional subtlety of a 'cello solo to the most extreme use of a guitar's whammy bar are tracked flawlessly.

The optimised USB MIDI interface further minimises latency by intelligently managing data packets and avoiding the inherent delays in the traditional MIDI hardware protocol.

Flexible MIDI Architecture

The MIDI converter architecture is very flexible and powerful comprising six zones (splits), each with configurable pitch bend, MIDI channel, transpose and other parameters.

Hi-Z USB Audio Interface

The i2M Musicport features a very high-impedance (Hi-Z) audio input circuit. This means it won't degrade the tone of your musical instruments, unlike typi-cal "line" inputs - often a problem with electric guitars and dynamic micro-phones. The input pre-amp also has adjustable gain to accommodate a wide variety of musical instruments.
High quality 16-bit, 44.1 kHz (CD quality), and 48 kHz (DVD quality) digital audio can be recorded into your favourite audio application, or used live, for example through amp-simulators with great-sounding results.

An ASIO driver (only supported on Windows operating systems) is available to provide low latency audio and features the unique ability to use any other au-dio device (even other ASIO devices) as the output audio device so you can hear everything you do in real time.

Future-Proof (Upgradeable Firmware)

To support new features and to make it futureproof, the firmware (internal software) of the i2M Musicport can be upgraded. This means you can invest with confidence in the i2M Musicport.

Pocket-Sized / Gigantic Possibilities

Fashioned as an in-line 1/4" jack-to-USB adapter, and about the size of a car key-fob, the i2M Musicport has an ultra-compact design that can easily fit into your pocket. But this tiny box will redefine your musical possibilities.

An invaluable composition tool, the i2M Musicport will let you access new sounds with ease, enable you to create tab and scores, provide you with new inspiration and let you have more fun than you thought possible.

Desktop Editor Software

The i2M Musicport features a very flexible and powerful MIDI converter archi-tecture with 6 zones enabling MIDI to be sent on up to 6 MIDI channels simul-taneously, with each zone being independently configurable. You can custom-ise each of the operating modes for your particular requirements and ex-change these settings with other i2M Musicport users.

Four presets can be stored on the i2M Musicport so you can switch between these without requiring the Desktop Editor Software. This software is available for Microsoft Windows, and OSX (10.5 and above).

Note: the i2M Musicport doesn't include its own MIDI sounds, you must use suitable software (sampler, synthesizer, sound module etc) or your computer to record or to hear the MIDI output.

Specs:

Power supply: USB bus powered
Size: 75mm x 28mm x 28mm
Weight: 40 g
Input (Instrument): 6.35mm (1/4") mono jack | 10 MOhm impedance
Switches:MODE button to select active preset
Computer: Standard Type B USB socket
Drivers: Class-compliant (built into operation system)
Preamp Gain: -12dB (cut) to +15dB (boost) in 3dB steps
Audio: 16-bit, 44.1kHz (CD Quality) | 16-bit, 48kHz (DVD Quality)

Box Contents:

i2M musicport
Printed Operators' Manual (in English)
1m USB cable

Notes: Module A-147-5 contains four voltage controlled low frequency oscillators (VCLFO) with triangle waveform outputs. All LFOs share a common frequency control. Each of the LFOs 2, 3 features a Delta control which is used to shift the frequency of the LFO in question up or down. With the Delta controls at center positions the frequencies of all LFOs are roughly the same. To control the frequencies by external control voltages four CV inputs are available which follow roughly the 1V/oct standard.

The module has these controls and in/outputs available:

Control F: manual control of the frequency for all four LFOs
Control Delta F2, F3 and F4: manual control of the frequency shift up/down for the LFO in question
Sockets CV 1...4: Frequency control voltage inputs (normalled from top to bottom)
Sockets with triangle symbol 1...4: triangle outputs
LEDs: visual displays of the triangle outputs (red = positive, yellow = negative output voltage)

Application examples:

Generation of four triangle modulation signals with a common frequency control for all LFOs and individual controls for the frequency deviation of each LFO, manually adjustable and controllable by external control voltages
Generation of modulation signals for polyphonic FM/PWM applications. For this the four CV inputs are connected to the same control voltages which are used to control the frequencies of the corresponding VCOs. That way each LFO follows the frequency of the associated VCO with the possibility to control the frequency of all VCOs (control F) and the frequency deviations (Delta F controls). For the simultaneous modulation depth control the Quad VCA module A-130-4 is recommended.
Generation of complex modulation signals by summing up the outputs (e.g. by means of a mixer module A-138n / A-138i / A-138j)

Technical notes:

The level of the triangle outputs is about +/-5V (10Vpp)
The manually adjustable frequency ranges from about 0.025 Hz (about 40 seconds) to about 50 Hz with the delta controls of LFOs 2, 3 and 4 about center position
The frequency deviations adjusted by the delta controls are about +/-1:5. Example: with 1 Hz in center position the frequency shift ranges from about 0.2 Hz in position -5 to about 5 Hz in position +5 (1 Hz/5 = 0.2 Hz, 1 Hz*5 = 5 Hz).
The manual frequency controls and the control voltage inputs have an exponential control behavior
With external control voltage the max. frequency is about 150 Hz, the minimum frequency
The scale of the CV inputs is roughly 1V/oct (not adjustable)
The CV inputs are normalled from top to bottom. Provided that only socket CV1 is patched CV1 controls the frequencies of all four LFOs.
When each CV input is patched to it's own control voltage each LFO is controlled individually by it's own CV. In this case CV1 controls only the frequency of LFO1.
Internally the rectangle outputs are available at four terminals (typ level +/-10V or 20Vpp). If required they can be wired to four sockets of a DIY breakout module made by the user, 1k protection resistors are recommended to avoid short circuits. If lower levels are required passive attenuators (voltage dividers) may be used.
Internally is even an (unbufferd) triangle sum signal available. For this each of the four triangle outputs is simply connected to the sum output terminal via a 47k resistor. This output has high impedance and should be buffered or amplified to avoid level drop when the load changes (e.g. by means of an A-180-3 or A-180-4 or A-183-3).
By changing the values of the capacitors in the LFO circuits even other frequency ranges are possible (e.g. Quad VCO to form kind of a cloud VCO). Pay attention that the accuracy of the CV input scales is not sufficient for precise 1V/oct VCO applications. The 1V/Oct scales cannot be adjusted and the circuits are not temperature compensated.

Dimensions
4 HP
45 mm deep

Review: When people think Black Sabbath, they're most likely thinking of their initial tenure with the incomparable Ozzy Osbourne, while then there's the other camp who recognise the greatness of the Oz-Man but opt to worship at the shrine of Ronnie James Dio. Unfairly forgotten to time, however, is the 90s tenure of the metal giants' third vocalist Tony Martin, who would ultimately serve as their second-longest running frontman across 1989's Headless Cross, 1990's Tyr, 1994's Cross Purposes and 1995's Forbidden. Now, for the first time, this entire era comes home to vinyl via Anno Domini: 1989-1995, with remasters of the entire collection, and a fully remixed version of Forbidden handled by nine-fingered guitar hero Tony Iommi himself. Also included are a thick booklet, previously unseen photos, a poster from the Headless Cross tour as well as a replica concert book. For the often forgotten third subset of Sabbath diehards, Tony Martin finally has his flowers.

Notes: Serious Rock DNA forged into a compact, battery-powered amp

BOSS Katana amps have received accolades from guitarists everywhere for their fantastic sound and feel, onboard effects, and great value. Now, the Katana-Mini makes serious Katana tone accessible in a small, go-anywhere amp that runs on batteries. Offering sound quality that far exceeds other amps in its class, this miniature powerhouse features an authentic multi-stage analogue gain circuit for big, expressive sound, plus a traditional analogue EQ and an onboard tape-style delay. Ultra-compact and travel-ready, the Katana-Mini delivers inspiring Katana tone anywhere you want to play.

Unlike typical small, battery-powered guitar amps that offer so-so sound quality, the Katana-Mini produces big, full tone that inspires you to plug in and play for hours at a time. BOSS's comprehensive design approach includes a custom speaker, advanced hardware, refined circuitry, and special component selection, which all work together to produce maximum sound quality in a minimum footprint. The amp also incorporates BOSS's decades of research in energy efficient design, providing class-defying power and punch from only six AA-size batteries.

Inspiring Tones, Ready to Rock

The Katana-Mini's all-analogue input circuitry includes multiple gain stages that drive three classic sound settings, offering the same cascaded gain approach found in high-end amp designs. This is what gives the Katana-Mini its satisfying tone and quick, interactive feel, with distortion that's easily controlled with input volume and picking strength. Inspired by BOSS's flagship Waza amp, the Katana-Mini's Brown setting delivers expressive, high-gain tones rich with harmonics, perfect for heavy riffs and soaring solos. Crunch provides overdrive that's ideal for rock rhythms and bluesy leads, while Clean offers up crisp, sparkling tones with punchy dynamic response.

Analogue Tone Stack and Onboard Delay

In contrast to the limited EQs found in other small amps, the Katana-Mini comes equipped with a genuine three-band analog tone stack. This provides natural sound shaping via familiar bass, mid, and treble controls, just like the tone stack in a full-size stage amp. In addition, you can enhance your sound further with the Katana-Mini's cool tape-style delay. Using the dedicated time and level knobs, it's simple to dial in everything from subtle reverb-like ambience to long, warm delay repeats.

Jam at Home or Grab and Go

Thanks to the Katana-Mini's advanced-yet-compact design, you can plug into serious guitar tone any time and any place. Weighing just under three pounds, it sits easily on a tabletop or shelf at home. And with the integrated handle and battery operation, it's easy and convenient to grab the amp and play anywhere you want, indoors or out. With the aux input, you can even plug in your smartphone and jam along with your personal music library or tracks streamed from the web. And for private practice and recording situations, you'll want to take advantage of the phones/recording output, which features special cabinet voicing for real mic'd amp tone.

Specifications

Rated Power Output: 7 W
Nominal Input Level: INPUT: -10 dBu (1 M ohm), AUX IN: -10 dBu (20 k ohm)
Speaker: 10 cm (4 inches)
Controls: POWER switch, TYPE switch

GAIN knob: VOLUME knob

[EQUALIZER]
BASS knob
MIDDLE knob
TREBLE knob

[DELAY]
TIME knob
LEVEL knob
Indicators: POWER

Connectors
INPUT jack: 1/4-inch phone type
AUX IN jack: Stereo miniature phone type
PHONES/REC OUT jack: Stereo miniature phone type
DC IN jack
Power Supply: Alkaline battery (AA, LR6) x 6, Rechargeable Ni-MH battery (AA, HR6) x 6, or
AC adapter (sold separately)
Current Draw: 350 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 7 hours
Rechargeable Ni-MH battery: Approximately 9 hours (When using batteries having a capacity of 2500 mAh.)
* This can vary depending on the capacity of the batteries and the conditions of use.
Accessories: Owner's manual, Alkaline battery (AA, LR6) x 6
Option (sold separately): AC adaptor (PSB series)

Size & weight

Width: 230 mm / 9-1/16 inches
Depth: 116 mm / 4-5/8 inches
Height: 181 mm / 7-1/8 inches
Weight (including battery): 1.2 kg / 2 lbs 11 oz

Notes: Verb Core Deluxe offers 8 different reverb effects in a single, straightforward stomp box format. A selection of classic and contemporary reverb types are available, with new features such as buffered tail bypass and kill dry functions. Each reverb type has adjustable Decay, Level and Tweak, which affects a different parameter depending upon the delay type selected. The dry signal follows an all-analogue signal path, keeping the signal pure and helping to avoid unwanted noise. If you need a reverb on your pedal board, this could be the answer to all your needs.

Mono or full stereo signal path
True bypass or buffered with reverb tails
8 distinct reverb types
Hold the footswitch for additional freeze function
USB-C port for firmware updates

Power supply: 9Vdc (PP3) battery or optional power adaptor
DC input connection: DC5521 jack (for optional adaptor - pin-negative)
Current consumption: <120mA
Controls: Decay, Level, Tweak, Reverb type
Modes: Room, Hall, Plate, Damp, Shim, Spring, Tre-verb, Mod-verb
Inputs: L+R 6.3mm mono jack
Outputs: L+R 6.3mm mono jack
Sampling format: 48kHz, 24-bit
Input impedance: 1M ohm
Output impedance: 1k ohm
Dynamic range: 104dB
Dimensions: 122 x 72 x 47mm
Weight: 270g

In the box

The box for this item contains:

Verb Core Deluxe pedal
Alkaline PP3 battery

Notes: Lots of functionality in a compact format thanks to Doepfer's typically smart approach. Eight linear VCAs with three mixers built in for good measure. Can be used for both audio and CV signals. Versatile.

Supplier notes:
Module A-130-8 contains eight linear voltage controlled amplifiers (VCAs). Each VCA features a control voltage input (CV), a signal input (In) and a signal output (Out). In addition three mixers are included: the socket labelled "1-4" outputs the sum of the VCAs 1-4, the socket labelled "5-8" outputs the sum of the VCAs 5-8, the socket labelled "1-8" outputs the sum of all eight VCAs.

The signal inputs are able to process levels up to 10Vpp without clipping. Each CV input is equipped with a trimming potentiometer that is used to adjust the sensitivity of the CV input in question. In the factory the module is adjusted for the CV range 1...+5V but can be re-adjusted by the user for other control voltage ranges (e.g. 0...+10V).

The amplification range for each single VCA is 0...1. The signals of the sum outputs have a lower amplification to avoid distortion.

The VCAs and mixers are fully DC coupled, i.e. the module can be used for the processing of both audio and control voltage signals. The control voltage and signal inputs can be normalled by means of small solder pads (e.g. 1 > 2 > 3 > 4 and so on, or 1 > 5, 2 > 6, 3 > 7, 4 > 8 for the stereo application mentioned below).

Typical applications:
any kind of VCA application (e.g. voltage controlled attenuation of audio or control voltage signals)
two voltage controlled mixers with four channels each
voltage controlled stereo mixer with four channels each, for this the control voltage inputs have to be correspondingly patched or internally normalled: CV1=CV5 /CV 2=CV6 / CV3=CV7 / CV4=CV8
voltage controlled mixer with eight channels
add-on for the planned Joystick module A-174-4

HP : 6

Notes: DJ-specific version of AIAIAI's modular TMA-2 XE headphones, featuring 40mm S01 drivers, slim H01 headband, on-ear PU leather E02 earpieces and straight 1.5m C05 cable. Quality sound with loud, punchy response and eco-friendly credentials.

Supplier's Notes:
Modular DJ headphones.

Balanced sound
Clear sound at high volume levels
High sound isolation
Weighing only 168g
Modular headphone design

Modular DJ headphones with balanced sound for DJ performance and music exploration.

Signature bio-diaphragm drivers engineered to deliver high volume levels and minimise distortion when performing in loud environments. Weighing only 168g for enhanced comfort over extended periods of time.

Balanced sound; punchy bass

Critically acclaimed sound specifically designed for live performance. Punchy bass and balanced sound for DJ performance and music exploration.

The speaker unit contains a bio-cellulose diaphragm made from bacterial cellulose, an organic compound grown using certain types of bacteria. The precision-grown diaphragm from bio-cellulose is stiffer, lighter, and stronger than regular PET speaker units, allowing the sound-producing diaphragm to vibrate without the levels of distortion found in other speakers.

Each of these qualities results in more accurate and detailed sound from the speaker with the ability to retain clarity of sound at high volumes.

Lightweight & durable

Put to the test and trusted in the most vigorous environments - on the road, in the studio, and on stage. This requires the highest standards and zero compromise.

Modular product design

With interchangeable components such as earpads, cables, and speaker units, you can upgrade or change parts of your headphones to improve sound quality, comfort and style.

Weighing only 168g

Slim headband design made from high grade nylon covered in neoprene, results in a total headphone weight of only 168g.

High grade materials

Speaker units made from 30% recycled plastics and diaphragms made from bio-cellulose. Ear-cushions made from soft and resilient vegan leather.

The TMA-2 DJ XE comes with a number of specific features suitable for live DJing.

Cable lock

Make sure the cable are not pulled out while playing by locking it to the speaker unit.

Adjustable cups

Change the position of the speaker units for the perfect headphone fit.

Angled stereo plug

Reduce the risk of pulling the plug from the mixer, and less intrusive cable when you are beat mixing.

Stereo jack adapter

Change from a stereo mini jack (3.5 mm) to a larger stereo jack (6.3 mm) with the adaptor.

In the box

S01 . Balanced sound - Bio-diaphragm

Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

H01 . Slim - PU foam

Slim and lightweight polycarbonate headband with soft, durable PU foam padding.

E02 . On ear - PU leather

Soft on-ear memory foam cushions covered with PU leather. The thickness and materials gives high isolation and a punchy sound. Strong bass and low end dynamics.

C05 . Straight - 1.5m - Adapter

Straight black 1.5m thermo plastic cable with soft touch surface. Comes with 1/4 to 1/8 screw-on adapter.

As a music creator, you need headphones that can keep up with your evolving needs and styles. These TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

By investing in this modular headphone system, you're not just buying headphones - you're investing in a long-term solution that evolves with your music. This reduces electronic waste while ensuring that you always have the optimal headphones just for you.

Diaphragm: Bio-cellulose
Driver diameter: 40 mm
Impedance: 32 Ohm
Magnet: High-grade Neodymium
Max power: 100 mW
Rated power: 40 mW
Resonance freq: 80 Hz