ダンスミュージック検索結果

Notes: Complete system built on Tangible Waves's AE modular format. Includes analogue sound sources, drum sampling, sequencing and everything needed to make music in a single unit.

Supplier's Notes:
The Synth Explorer "Ultimate" is a fully featured modular synthesizer which has been designed primarily for educational purposes. It offers a lot of synthesis features in a very small and portable package and includes the modules that invite for DIY modification and experimentation with code and circuits.

This system includes the following modules:

MASTER I/O (power, MIDI, CV/Gate, Audio in/out)
2OSC/d (two oscillators with sawtooth and square waveforms)
DRUMKIT 010 (lofi drum samples)
2LFO (two low frequency oscillators with various waveforms)
2ENV (two attack/decay envelopes with looping function)
WASPFILTER (an iconic filter with a lot of character)
SVFILTER (a state variable filter which can go into self oscillation)
2VCA (two voltage controlled amplifiers)
BRAEDBOARD (a blank canvas for circuit experiments)
2S&H (dual sample and hold)
2ATT/CV (dual attenuator and CV generator)
MM-DIV (multi mode clock divider)
SEQ8 (8 step CV and Gate sequencer with different run modes)
QUANTIZER (4 channel CV quantizer with many different scale modes)
METER (oscilloscope, frequency spectrum, tuner, voltmeter)
GRAINS (fully programmable module based on the Arduino)
MIXER 4-4 (two 4 channel mixers)
DELAY (analogue delay)
HPAMP (headphone amplifier with dual outputs and volume control)

Notes: All-analogue, digitally-controlled mixer with 10 stereo inputs, three stereo outputs, clickless mutes, save and recall, MIDI, and CV via expanders.

Xer Mixa is a mixer with 10 stereo-paired inputs, three stereo-paired output busses, tactile controls, and a 100% analogue signal path with low noise and crosstalk, pristine sound quality, and ultra-high headroom. A digital control interface harnesses the true power of hybrid design, allowing for state save and recall, per-channel pan law and pre/post send settings, multichannel editing, and MIDI I/O.

Xer Mixa features 8 interactive fader-controlled channels and two aux inputs, all with clickless mutes. Configuration options abound for per-channel pan-law settings, pre- or post-fader sends, and channel settings are made simple with the screen. Settings can be saved into preset slots for easy recall for performances or sessions.

Xer Mixa is a compact 32HP, with a streamlined and easy-to-use interface. CV control over almost any parameter is available through the rear-panel connecting Expando Expandi, which adds CV 8 inputs to Xer Mixa. Connect up to two Expando Expandis for easy CV control over channel levels, pan, aux sends, and more. Xer Mixa and Expando Expandi are available together as a discounted bundle, or individually.

Whether you have a massive studio rig or a compact performance system, Xer Mixa is the perfect choice for an expressive mixer.

Notes: A revolutionary keyboard controller that puts the world's best sound library at your fingertips. Get direct, hands-on control of virtual instruments from NI and thousands more from developers like Arturia, Heavyocity, Korg, Output, Spitfire Audio, and u-he.

Browse and tweak everything from synths and drums to orchestral libraries and scoring tools - all seamlessly integrated with Kontrol's tactile controls and large, high-res screen. Then play with a new level of expression and freedom thanks to a best-in-class keybed, polyphonic aftertouch, Light Guide, and Play Assist features. And with a comprehensive package of included software, featuring the industry-leading sampling platform Kontakt 7, you'll be ready to go from day one.

Polyphonic aftertouch

Take expression one step further with the slightest pressure on individual keys. Bring new layers of nuance to your playing with cutoff, pitch, vibrato, and much more, without reaching for an extra encoder or dial. All three models come complete with polyphonic aftertouch on an industry-leading keybed developed in collaboration with Fatar.

Thousands of instruments made real

Kontrol brings the world's best virtual instruments to life in a genuinely immersive experience. Whatever you're playing, get in-depth control thanks to an unparalleled direct connection to Kontakt. Find sounds quickly with intuitive on-screen navigation, then adjust and play them with intelligent auto-mapping that understands the parameters.

Included software

Kontrol comes with a host of creative music production tools - all fully integrated with the hardware, to give you everything you need to start making music straight out of the box.

Included software
Kontakt 7
A free Kontakt instrument of your choice
Komplete 14 Select
Komplete Kontrol Software
Stradivari Cello

An internet connection and a graphics card that supports Direct 3D 11.1 (feature level 11_0) or higher are required to download and activate this product. Once installed and activated, the product can be used offline.

NKS 2 NKS (Native Kontrol Standard) is NI's technical standard for virtual instruments and effects. It's used across the industry and ensures that all compatible plugins are precisely mapped to controls. Kontrol marks the launch of NKS 2, which powers the unmatched software integration experience.

S49 MK3 Dimensions: 802.2 × 323 × 86 mm
Weight: 5.5kg

Hardware specifications:
1 high-resolution colour screen with glass surface (1280 × 480)
CNC machined, bead blasted and anodized aluminum, 8 × encoder caps, 1 × 4D encoder cap, 2 × wheels (pitch and mod)
RGB illuminated pitch and mod wheels
New button-islands that form a continuous dustproof control surface and are grouped by function

System requirements

MIDI 2.0 compatible
Intel Core i5, Apple M1 (and equivalent or higher)
macOS 13 (Ventura) or higher (compatible with macOS 12 in MIDI 1.0 mode)
Windows 10 (latest service pack) or higher
8 GB RAM

Notes: A revolutionary keyboard controller that puts the world's best sound library at your fingertips. Get direct, hands-on control of virtual instruments from NI and thousands more from developers like Arturia, Heavyocity, Korg, Output, Spitfire Audio, and u-he.

Browse and tweak everything from synths and drums to orchestral libraries and scoring tools - all seamlessly integrated with Kontrol's tactile controls and large, high-res screen. Then play with a new level of expression and freedom thanks to a best-in-class keybed, polyphonic aftertouch, Light Guide, and Play Assist features. And with a comprehensive package of included software, featuring the industry-leading sampling platform Kontakt 7, you'll be ready to go from day one.

Polyphonic aftertouch

Take expression one step further with the slightest pressure on individual keys. Bring new layers of nuance to your playing with cutoff, pitch, vibrato, and much more, without reaching for an extra encoder or dial. All three models come complete with polyphonic aftertouch on an industry-leading keybed developed in collaboration with Fatar.

Thousands of instruments made real

Kontrol brings the world's best virtual instruments to life in a genuinely immersive experience. Whatever you're playing, get in-depth control thanks to an unparalleled direct connection to Kontakt. Find sounds quickly with intuitive on-screen navigation, then adjust and play them with intelligent auto-mapping that understands the parameters.

Included software

Kontrol comes with a host of creative music production tools - all fully integrated with the hardware, to give you everything you need to start making music straight out of the box.

Included software
Kontakt 7
A free Kontakt instrument of your choice
Komplete 14 Select
Komplete Kontrol Software
Stradivari Cello

An internet connection and a graphics card that supports Direct 3D 11.1 (feature level 11_0) or higher are required to download and activate this product. Once installed and activated, the product can be used offline.

NKS 2 NKS (Native Kontrol Standard) is NI's technical standard for virtual instruments and effects. It's used across the industry and ensures that all compatible plugins are precisely mapped to controls. Kontrol marks the launch of NKS 2, which powers the unmatched software integration experience.

S61 MK3 Dimensions: 967.4 × 323 × 86 mm
Weight: 6kg

Hardware specifications:
1 high-resolution colour screen with glass surface (1280 × 480)
CNC machined, bead blasted and anodized aluminum, 8 × encoder caps, 1 × 4D encoder cap, 2 × wheels (pitch and mod)
RGB illuminated pitch and mod wheels
New button-islands that form a continuous dustproof control surface and are grouped by function

System requirements

MIDI 2.0 compatible
Intel Core i5, Apple M1 (and equivalent or higher)
macOS 13 (Ventura) or higher (compatible with macOS 12 in MIDI 1.0 mode)
Windows 10 (latest service pack) or higher
8 GB RAM

Notes: Debut release from Pioneer parent company AlphaTheta, the Wave-Eight offers ultra-low-latency hi-fi sound over wireless SonicLink connection. Up to eight hours operation with built-in battery, waterproof design, and impressive portability thanks to 12.7 kg total weight per unit.

Supplier's Notes:
SonicLink ultra-low-latency wireless technology

Cable-free DJing is possible with the WAVE-EIGHT, thanks to SonicLink. This ultra-low-latency technology wirelessly transmits audio much faster than a Bluetooth connection so only a fraction of a second passes between pressing play on the decks and hearing the track through the speaker.

Switchable sound modes

The WAVE-EIGHT features several modes you can change between with a single switch to create the type of sound you need, including Mono, Stereo, and Subwoofer mode.

Combinable with the OMNIS-DUO

If you combine the WAVE-EIGHT with the OMNIS-DUO portable all-in-one DJ system, which also features battery power, you can play cable-free for total freedom.

Battery power and waterproof design

A full battery charge gives you 8 hours of music on the WAVE-EIGHT. The unit is also waterproof, with an IPX4 rating, so it's ideal for using outdoors.
And there's a USB Type-C port for
charging a phone or other device.

Professional sound quality
With a highly efficient Class D amplifier, a newly developed 8-inch driver, and a Vortex Bass Accelerator which delivers clear and powerful bass, the WAVE-EIGHT will bring the vibes and the punch to your party's sound, even in outdoor settings. To cover larger events and spaces, you can easily add more units to your setup with the SonicLink connection.

Easy portability

The extendable handle, casters, and additional grab handles make it easy to carry the WAVE-EIGHT to any location on your own. There's a pole socket built-in too, so you can mount the speaker on a stand for extra height.

SonicLink ultra-low-latency wireless technology
Combinable with the OMNIS-DUO
Professional sound quality
Switchable sound modes
Battery power
Waterproof design
Easy portability

Dimensions: (W × H × D) 300 × 554 × 337 mm / 11.8" × 21.8" × 13.3?"
Weight: 12.7 kg / 28.0 lbs.
Frequency range: 2.4 GHz (2.4000 GHz - 2.4835 GHz)
EQ modes: Music / Music (Low Cut) / Flat / Flat (Low Cut) / Vocal / Subwoofer (Low Cut mode is intended for use on units that are combined with a WAVE-EIGHT set to Subwoofer mode.)
Battery life / Battery spec: Approximately 8 hours
Internal battery charging time: Approx. 4 hours with power off / Approx. 6 hours with power on
Terminal
Input: XLR/TRS combo jack × 2, 1/4" TRS jack × 1, 3.5 mm stereo mini jack × 1
Output: XLR × 1

Notes: ***B-STOCK: Box opened, missing documentation, product in perfect working order.***


Hands-on controller for DJ software or to expand the power of your Denon players and controllers. Plug into an SC6000 player or similar to add dedicated controls for the second layer. Excellent value.

*** Introducing Engine DJ version 3.0 ***

This product is compatible with Engine DJ 3.0, visit enginedj.com for more info.

Comprising of Desktop and OS platforms, Engine DJ is the world's first, and most advanced, embedded creative platform for DJs.

Internet-ready music streaming

Access premier music streaming services directly on Engine DJ compatible devices via Wi-Fi or wired connection without the need of a computer. Log in to your favourite music streaming service and start playing. Set and recall hot cues and loops as you would with physical media.

Control and sync music with lights

Automatically sync your DJ set with DMX, Nanoleaf and Philips Hue Smart Lights. Simply raise the channel fader and press play to see the automatic and synchronized light show. Get creative by customizing the light show on-the-fly with a variety of touchscreen controls.


Supplier's Notes:
Expand your creativity

Inheriting the same DNA from the ultimate club experience SC6000 PRIME, the Denon DJ LC6000 Prime is the world's most versatile DJ controller. Bringing professional club style layout, design and control to both standalone and laptop-based DJ workflows.

With the same look, design, and feel, as the flagship SC6000 Media Player, the versatile LC6000 gives DJs a professional hardware control for the second dual-layer audio output, unlocking Engine OS powered Media Players' full potential when controlling the secondary layer. Showing its true versatility, the LC6000 Prime is the ultimate DJ Controller for compatible DJ applications, giving DJs professional hardware control in their setup.

The stunning full size 8.5" jog wheel, multi-function performance pads, 100mm dual-precision pitch fader, and navigation control grants the DJ more power and ease to be creative in the mix. Powered and activated with just a single USB connection, the LC6000 Prime gives 'plug and play' a whole new meaning in the DJ booth. Connect one or multiple units to customise your setup and expand your creativity.

Unique power of dual-layer

Denon DJ has the only media player on the market that offers dual-layer playback with independent outputs for each layer. The LC6000 Prime adds physical control over the second layer, making it easier than ever to perform using just one media player.

Professional DJ controller

The LC6000's plug and play connectivity with DJ software, provides the ultimate club experience over one or multiple software decks, further expanding creative possibilities for the professional DJ. Compatible with Virtual DJ, Algoriddim Djay Pro AI & Serato DJ Pro.

8.5" jog wheel

At the heart of the LC6000 Prime is a full size 8.5", capacitive touch jog wheel that features a high-definition central display. This colour display shows track artwork or a custom DJ logo, layered with play head position and other essential performance information.

Expand your creativity

Completing the creative toolset, the LC6000 Prime has 8 robust multi-function performance pads offering Hot Cue, Loop, Roll, and Slicer for enhanced creativity and remixing 'on-the-fly'. Alongside this, the LC6000 has a dedicated loop section and navigation control, giving DJs complete and confident control of their performance.

Technical Specifications:

Platters: 8.5" / 216mm (diameter)
Metal construction with display & capacitive touch
Platter Display: 3.5" / 89mm (diameter)
Full-colour LED-backlit display
Connections: (1) USB Type-B port (for computer/media player connection), (1) DC power adapter input
Power Adapter: 12.0V, 2.0A
Dimensions (width x depth x height): 14.2" x 12.6" x 4.7" / 36 x 32 x 12cm
Weight: 6.24 lbs/2.83kg

Notes: One of the most trustworthy brands in the industry delivers another winner. Proper high-end business, with 12 analogue inputs and 12 outputs, plus an extensive array of digital connections. Great value at this price point.

Supplier's Notes:
Next-gen 28 x 32 USB3 audio interface - Builds on 22 years of proven success as an industry-leading audio interface brand.

New 3.9-inch TFT display - The bright, 24-bit RGB LCD provides 480 x 128 pixel high-resolution metering for all analogue and digital I/O, plus detailed status info and access to hardware settings from a simple and convenient menu.

Superb analogue audio quality and high-end converters - Renowned ESS Sabre32 DAC technology delivers 125 dB dynamic range. Support for all standard sample rates up to 192 kHz.

Ultra-low latency and proven, high-performance MOTU drivers - Round-trip latency (RTL) performance as low as 2 ms at 96kHz with high-performance DAW hosts.

Universal connectivity - Connects to your computer with 5 Gbps USB3 (compatible with USB2) for up to 60 audio channels. Class-compliant firmware and industry standard drivers work with any audio apps. Connects to an iPad™ with USB-C or a Lightning adapter kit (sold separately).

60 simultaneous audio channels - 28 inputs and 32 outputs, including two combo XLR/TRS mic/line/hi-Z guitar inputs with send/return inserts, 8 TRS analogue (line-level) in/out, separate main outs on XLR jacks, two banks of 8-channel optical I/O, stereo RCA S/PDIF digital I/O, and two front-panel headphone outputs.

Advanced mic channels - Cutting-edge components deliver ultra-transparent sound with -114 dB THD+N, 118 dB dynamic range and -129 dBu EIN. Each mic channel provides individual controls for +74 dB of preamp gain, -20 dB pad, 48V phantom power, and phase invert. All settings can be controlled remotely from a computer or iOS device. Each mic channel includes a dedicated send/return insert for outboard gear processing.

Flexible insert returns - When nothing is connected to the front-panel mic inputs, the two rear-panel returns function as additional line inputs with identical signal path characteristics as the other eight line inputs.

DSP mixing and effects processing - Flexible 24-input digital mixer with 8 stereo busses and DSP effects, including reverb, 4-band EQ, gate and compression.

Wi-Fi control - If the 828 is connected to a computer on your Wi-Fi network, you can control everything wirelessly from the CueMix 5 app running on mobile devices or other computers on the same network - even multiple devices at the same time. Manage access to the 828 with network discovery and password protection.

Precision boost/trim for analogue I/O - Calibrate analogue input and output signals in precise 1 dB increments. Apply phase invert individually to analogue inputs.

Control room features - Control your sessions with front-panel "talk" button and "A/B" speaker select buttons to quickly compare your mixes on two sets of studio monitors.

Two flexible headphone outputs - With independent volume control, each headphone output can mirror each other, the Main Outs, any other analogue output pair, any CueMix bus, or any USB output channels. Or you can create a completely customized mix for each headphone that includes live 828 inputs and built-in reverb.

Two banks of optical I/O - Connect outboard digital processors, digital mixers or other gear with 16 channels of ADAT at 44.1/48 kHz or 8 channels of SMUX at 88.2/96 kHz. Bank A can optionally provide stereo TOSLink (optical S/PDIF) I/O up to 96 kHz.

Foot switch input - Connect a standard foot pedal switch (sold separately) for hands-free punch-in and punch-out while recording. Or map the pedal to any keystroke function in your host software.

MIDI in/out/thru - connect MIDI gear without the need for a separate MIDI interface.

Word clock in/out/thru - Supports all sample rates up to 192 kHz.

DC-coupled TRS outputs - Use the 828 to manipulate and sequence voltage-controlled modular synthesizers from a host DAW.

Loopback for live streaming and podcasting - Easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the 828 in your host software for live streaming or podcasting.

Guitar re-amping - Connect your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic'd up amp simultaneously. Then re-amp the dry signal later with different amps and cabs - or amp modelling plug-ins - to experiment with different tones.

CueMix 5 app - Control mixing and settings from your Mac, PC or iOS device.

Performer Lite - Workstation software with over 100 included instruments, dozens of effects and 6 GB of included loops to make music right away. Also includes Ableton Live Lite.

Next-gen 28 x 32 USB3 audio interface with DSP, mixing and effects
New 3.9-inch 24-bit RGB LCD with precision metering for all I/O
Superb analogue audio performance driven by ESS Sabre32 Ultra™ DAC Technology
Ultra-low latency and proven, high-performance MOTU drivers (~2 ms RTL with a 32 sample buffer @ 96 kHz)
Universal connectivity with 5 Gbps USB

Technical Specifications
Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz

Mic/line/instr inputs
2 x XLR/TRS "combo" jacks
Individual -20 dB pad and 48V phantom power
Preamp gain: +74 dB in 1 dB increments
1 MO impedance on the line/instr inputs
Independent balanced send/return inserts

Analogue inputs
8 x 1/4-inch TRS line in (balanced/unbalanced)
2 x 1/4-inch insert returns function as balanced TRS line inputs (with no mic inputs connected)
Max level: +21 dBu
+20 dB digital gain on each input

Analogue outputs
8 x 1/4-inch TRS line out (balanced, DC coupled)
2 x male XLR out
Max level: +21 dBu
2 x 1/4-inch TRS stereo headphone
2 x 1/4-inch TRS sends (balanced, pre-converter)

Digital I/O
2 banks (16 ch) of ADAT optical I/O at 1x sample rates
2 banks (8 ch) of S/MUX optical I/O at 2x sample rates
Bank A switchable to stereo TOSLink I/O (optical S/PDIF)
1 x stereo S/PDIF I/O on RCA (up to 96 kHz)

Computer I/O
1 x USB-C 3.2 Gen 1 (5 Gbps) Type C - USB2 compatible USB audio class compliant (no driver needed)
1 x IF-certified USB 3.2 Gen 1 Type C-to-C cable included
Compatible with USB Type A (with a C-to-A cable, sold separately)
Total USB audio channels: see "Total Audio I/O" below
Round Trip Latency (RTL): ~2 ms (32 sample buffer at 96K)

Total audio I/O
28 in / 32 out (60 total channels) at 1x sample rates
20 in / 24 out (44 total channels) at 2x sample rates
10 in / 14 out (24 total channels) at 4x sample rates

MIDI I/O
1 x MIDI In
1 x MIDI Out/Thru
16 MIDI channels to/from computer host

Headphone
2 x 1/4-inch TRS stereo headphones
Output impedance: <1O
Max output: 14.4 dBu

Phantom power: 2 x individual +48V

Foot Switch
1 x 1/4-inch foot switch input
Mapping: pedal up/down to any host keystrokes

Sync I/O
1 x BNC Word Clock In
1 x BNC Word Clock Out/Thru
Sample rates: all (from 44.1 to 192 kHz)

Front panel
2 x XLR/TRS combo inputs
2 x 1/4" TRS headphone outputs
2 x potentiometer - headphone volume
2 x potentiometer - mic/instr input gain
1 x potentiometer - menu navigation
1 x large potentiometer - main volume
12 x switches - (2) 48V, (2) pad, (6) control room, (2) nav
1 x 3.9-inch 480 x 128 pixel 24-bit RGB TFT display
1 x latching power button

Power
Internal 100-240V autoswitching supply
50-60 Hz - 0.5A max

Dimensions and weight
(width x depth x height, enclosure only)
19 x 12.25 x 1.75 inches / 48.26 x 31.1 x 4.44 cm
11 lbs / 5 kgs

Notes: ***B-STOCK: Dent on the side, product in perfect working order***


This long-awaited FM voice module from Jomox is a self-contained synth in Eurorack format, patchable and compatible with other modules but capable of creating eight-voice polyphonic patches all on its own. Vastly powerful.

Supplier's Notes:
The Mod FM is a completely self-contained 8 voice FM synth in eurorack format, which can create powerful sounds out of the box without lacking the commonly provided CV modulation possibilities.

It provides 4 Operators and 2 LFOs/VCOs per voice. Additionally it has 2 analogue filters and analogue VCAs per voice which apply analogue warmth and depth to the Mod FM, although the FM engine is digital of course.

Each voice has own CV/Gate inputs and an individual output. There is a mix output which separates even and odd voices. Here you can mix internal effects like delay and reverb to the stereo output signal.

Next to the CV/Gate control, the Mod FM has Midi in and out in TRS type A format and a USB C connector which handles Midi too.

Even without diving too much into complicated modular setups you can create extremely good sounding and metallic FM sounds, snappy bases but also soft and deep sounding analogue style sounds.

Furthermore, the Mod FM offers a variety of external cv modulations in order to e.g. modulate each operator individually or control the FM envelopes.

The Mod FM is fully multitimbral, i.e. each voice can play an own sound in Multi Mode which gets stored as a complete multi set (not only vectorized). That is, you can copy a single sound to the desired multi, but editings made on that particular multi get stored along with the multi set.

Hence, we have the biggest advantage of the hybrid approach:

Modular is great but can be very complex, and you might be trapped in a system where you never reach again the desired sound of the latest session. Storability certainly helps.

The different sections in more detail:

Matrix FM:

4 operators are arranged in a matrix, in which every operator (= sine oscillator) can be modulated by each one of the other three.

The 16 endless potentiometers of the matrix adjust the modulation amount (FM amt) and the base frequency of the operators.

For each operator you can change the base frequency by the diagonal knobs.

There are several overtone modes that determine if one operator is controlled by the keynote (or CV) = base operator, or if it's locked in as overtone (= overtone operator) to the assigned base operator. For the base operator, the number resembles xxx semitones added to the keynote.

For the overtone operator, the adjusted number is the xxx = Nth overtone or harmonics to the base operator frequency.

The locked overtone operator tracks the base operator and is still able to modulate and being modulated.

Each operator has an ADSR envelope. This envelope can also be used to frequency-modulate the operator.

Algorithm:

The algorithms from the known FM synthesis are actually special cases to the whole matrix.

Because it gets pretty quickly uncontrollable if you turn all the knobs because of the feedbacks, Jomox have decided to implement the algorithms. There are 26 algorithms, that are derived from the DX9 with its 4 operators.

At this menu it's even possible to change the frequency mode of each operator to a fixed frequency that is edited in single Hz and which does not follow the keynote, but only modulation. That makes sense for e.g. percussive sounds.

LFO/VCO:

Each voice has 2 LFOs which can modulate either the frequency (FM) or the amplitude (AM) of an operator. Every LFO addresses 64 different wave forms that are displayed in the right OLED display.

There is another feature: each LFO can be switched into a VCO that covers the whole audio range. You can even mix it into the signal chain and it tracks to the keynote. The former LFO rate parameter turns into a detune parameter. That is, you can create classic sounding rectangle/sawtooth analogue basses or string pads - and much more of course.

Filter:

Each voice contains an analogue filter which is build up with the chip SSI2140 from Sound Semiconductor, which is an improved modern version of the old SSM2040, designed by Dave Rossum, and which had been used in Oberheim synths and the early SCI Prophet-5.

The filter has a classic 24dB output and a 12dB state-variable multimode-filter. The three basic characteristic outputs LP/BP/HP can be cross-faded continuously with one parameter called shape.

Both filter outputs 24dB/12dB can be mixed independently.

The ADSR for the filter is fast and cuts in very quick and directly, the resonance is well adjustable.

The filter section contains an own LFO for the cutoff which is independent from the digital sound engine and has also 64 waveforms.

The VCA is a fast transistor-VCA which is important for snappy sounds. The same transistor-VCA is used in all Jomox drum products. Therefore the ModFM can be used as a rich source for technoid drums and percussions of any kind.

Notes: NOON is a passive analogue drum/synthesizer. Each of the eight channels uses a unique analogue circuit with its own characteristics. No power supply is needed. Each circuit is triggered and powered individually from incoming gates or control voltages provided by voltage sequencers or modular systems. By using this unique method, we can increase instability and magnify organic aspects of traditional analogue electronic instruments. The sound of analogue, at its core, is the sound of sculpted electricity. By removing the stabilizing elements of a constant power source, we can listen to the sound of electronic circuits loading and unloading, powering up and powering down, and we can increase the natural chaotic movement of electricity. The loading of circuits creates natural ways to access swing and groove or ways to deconstruct a programmed rhythm sequence to make surprisingly new ideas.
Each channel is represented by a tuning fork. Incoming voltage can be thought of as a way to "strike" each fork with momentary voltage. Between every channel there are Link buttons which allow voltage sharing between channels. Linking them provides a wide mix of results depending on incoming voltage, active or inactive channels, slider settings, gate lengths and multichannel linking. The results can be described as cross modulation, growth (creating a larger and more complex circuit), or processing (filtering, distortion). Due to the cycles of voltage and this inherent instability, a definition of what is actually occurring between channels can be hard to pin down. The eight Mod buttons, which are located at the bottom of each tuning fork, change the behaviour and sound of each circuit. The eight latching CV buttons along the top allow the "?" Even and "?" Odd CV modulation inputs to route to even and odd channels. When incoming CV is unmuted, a channel's behaviour can change drastically and this behaviour can change further when channels are linked. These CV inputs are a way to add microtonal pitch changes and/or large textural movement to voices. The Even and Odd CV inputs are summed to their respective channels to provide a rhythmic modulation reference between multiple channels.

Limitations & Recommendations

A voltage sequencer, modular system or some form of external control voltage is required for use. This is a powerless instrument which relies upon receiving voltage and control from external sources.
Using sequencers which have the ability to vary gate length is highly encouraged due to the increase in sound possibilities and rhythmic movement.
Each model of voltage sequencer can have slightly different effects on the tonality of the instrument due to variations between manufacturers and feature sets.
Given the passive design of the device the reaction of the touch plates will vary greatly based upon what voltages are being received in which channel, if channels in are being touched in tandem, skin moisture and gate lengths. Using only trig signals can significantly lessen the touch plate response.
Channels 7 & 8 (Larynx & Bacid) will give best results being fed gate and cv voltage simultaneously. Sending trigs instead of gates to these channels may have less interesting results than found in other channels.

Specifications

Dimensions: 32cm x 18cm x 2.5cm / 12.5" x 7" x 1"
Materials: Gold plated PCB (2mm fiberglass) / routed Birch plywood case with clear coat / metal shaft sliders with rubber caps / concave and dual LED latching push buttons
Weight: 0.9 kg. / 2 lbs.
CV Inputs: 10 x 3.5mm jacks
Audio Input: 1 x 3.5mm jack
Audio Outputs: 10 x 3.5mm jacks

Notes: The ZED-12FX is ideal for groups who need to travel light. Even with its small footprint, the 12FX squeezes in 4 auxiliary channels and swept semi-parametric EQ on top of the already impressive feature set including configurable USB audio in/out makes it easy to capture stereo recordings.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED-12FX is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

MUSIQ
ZED-12FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-12FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

Based on the proven pre-amps from the hugely successful PA series, ZED-12FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a
higher input impedance.

Notes: One of our favourite small live/studio mixers, shown here in 16-channel form with built-in digital effects. Clean sound, decent three-band semi-parametric EQ and built-in audio interface. Very impressive.

Supplier notes:
The ZED-16FX is ideal for groups who need to travel light. It gives musicians, venues and hire companies access to 10 full mono channels, 3 stereo channels and a high quality effects unit in a compact, rack mountable format. Configurable USB audio in/out makes it easy to capture stereo recordings.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on the ZED is super-flexible and super-easy: No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your Zed, select the USB routing on the mixer and the device on your computer and that's it. CD quality audio to and from your PC or Mac.

The ZED-16FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ, with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, the ZED-16FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge, 69dB of range to be exact, and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

The ZED-16FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Allen & Heath's DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point, this quality and integration is only available from the ZED-FX. The ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing, in fact, it's just as easy as using effects pedals. To alter effects parameters, the Tap button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on Plate Reverb, or the depth on Chorus.

Based on the proven pre-amps from the hugely successful PA series, ZED-16FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

Notes: Live or in the studio, the ZED60-14FX is a compact, portable mixer that is ideal for small bands.

This mixer is a guitarist's dream. Two of the 8 mono channels have high impedance jack inputs that can take a normal line level or a low level input from a guitar pickup, so guitars can be plugged straight into the mixer without the need for DI boxes. These inputs have been crafted to recreate the sound of a classic tube preamp in a combo or head amp for incredible definition and warmth. Two stereo inputs are provided for MP3/CD players or keyboards.

The ZED60-14FX comes with a configurable USB audio in/out, making it easy to capture a stereo recording at the gig or in the studio. The mixer is also equipped with professional XLR main stereo outputs, a flexible monitoring section with headphone and speaker feed outputs and 16 stunning FX.

Most important of all, the ZED60-14FX lives up to the audio and build quality standards that have made Allen & Heath one of the most trusted names in professional audio for more than 40 years.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS:
1) Main Mix Left + Right (Post master Level)

2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)

3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS:
1) To Playback input (through jack socket break contacts)

2) To Stereo 2 channel (through jack socket break contacts)

ZED60-14FX features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED60-14FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point - this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

ZED60-14FX's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 7 & 8 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character.

Notes: A unique take on delay and looping, the Meris LVX is designed for ultimate flexibility when processing guitar, synth or line level sources. Stereo in/out, fully customisable signal path and supreme sound quality.

Supplier's Notes:
Meris LVX Modular Delay System

LVX is a Modular Delay System which breaks the paradigm of pre-set delay types in favor of freedom and flexibility.

A completely new UI and user experience has been designed from the ground up to make LVX immediately intuitive to navigate. The architecture of LVX allows ultimate creative freedom to design a custom delay.

The pedal features discrete processing elements and control signal modifiers that can be connected as desired for nearly infinite flexibility in crafting custom sounds. Make room for new memories.

Specs

Conversion: 24 bit A/D and D/A
DSP: 32 bit floating point
Sample Rate: 48000 Hz
Input Impedance: 1 Meg Ohm
SNR: 115 dB Typical
Frequency Response: 20Hz-20kHz
Max Input Level: +9 dBu (instrument level setting), +12.5 dBu: (line/synth level setting)
Power: 9V DC center-negative, 300mA, 2.1mm jack
Bypass: Selectable True Bypass (Relay) or Analog Buffered Bypass
Dimensions 7.25" wide, 4.5"" long, 2" tall. (Same depth and height as all other pedals.)
Weight: 24 ounces

Notes: Updated version of Rode's outstanding podcast/video/streaming mixer. Fully integrated audio production setup with microphone and instrument inputs, audio interface and built-in effects.

Supplier's Notes:
The RODECaster Pro II is the ultimate audio production solution for streamers, podcasters, musicians and content creators. Combining revolutionary features with superior sound quality, unmatched ease of use and endless customisability, it is all any creator will ever need to record incredible audio.

Combining all of the elements typically found in a professional podcasting, streaming or studio setup into one powerful, easy-to-use console, the RODECaster Pro II simplifies the audio production process, allowing any creator to get set up to record high-quality content in seconds.

The large (5.5-inch) high-definition, full-colour touchscreen with haptic feedback, tactile rotary encoder, bright RGB colour-coding and hands-on controls makes navigating the RODECaster Pro II super simple.

Pre-loaded presets and the intuitive VoxLab processing editor make capturing professional-quality sound effortless. Every feature, from setting up a microphone channel to programming the SMART pads, has been designed to maximise creativity, and every function can be controlled on-board via the user-friendly interface or with a computer via RODE Central for maximum convenience. Incredible audio, incredibly easy.

The RODECaster Pro II offers an unparalleled feature set designed to make anyone sound exceptional every time they hit record. Four studio-grade Neutrik combo inputs with our ultra-low-noise, high-gain Revolution Preamps deliver astonishing clarity and transparency with any microphone or instrument. Users can craft their own unique sound with a full suite of studio-quality APHEX processors, including the legendary Aural Exciter, Big Bottom and Compellor, and powerful on-board effects, including reverb, delay, pitch shifting, robot effects and more. A high-performance quad-core audio engine delivers significantly more processing power than any other content creation console on the market and unlocks huge potential for future updates.

The RODECaster Pro II features four high-end studio preamps that have been designed from the ground up to deliver pristine audio quality with any microphone or instrument. With an ultra-low noise level of just -131.5dBV and a whopping 76dB of gain on tap, they eliminate the need for microphone boosters, lifters or external processing, even with the most demanding dynamic mics. They are highly transparent, allowing every detail of what's plugged in to shine and providing a clean platform to shape and enhance the signal using the on-board processing and effects.

Every great recording starts with a great microphone and a great preamp. The RODECaster Pro II features four phenomenal preamps that rival boutique designs that cost thousands of dollars per channel, complete with broadcast-quality faders for precise gain adjustment, accurate digital level metering, and high-power headphone and speaker outputs for monitoring in stunning definition . Just add a RODE mic and you're golden.

To compliment these high-end preamps, the RODECaster Pro II offers studio-quality signal processing powered by one of the most revered names in pro audio: APHEX.

On-board is a suite of legendary APHEX processors each painstakingly remodelled for the RODECaster Pro II to deliver authentic emulations of classic hardware units. This includes the Aural Exciter for adding sheen and sparkle, Big Bottom for adding richness and depth, and the legendary Compellor master compressor/leveller for adding that all-important final touch. There is also a de-esser, noise gate, high-pass filter and equaliser, also powered by APHEX.

These can be tweaked to taste using the RODECaster Pro II's innovative VoxLab processing editor, which utilises three intuitive controls to change multiple parameters on multiple processors for achieving pro results in seconds, or via the advanced editor for granular editing (either on-board or with a computer). All settings can be saved as presets and re-loaded at any time on any channel.

Every podcast, every stream, every studio is different. The RODECaster Pro II is designed to adapt to any creative vision, with endless customisability allowing users to design their perfect setup no matter what kind of content they are creating.

Specifications

Acoustic & electrical

Processor: 1.5Ghz quad-core audio engine
Bit Depth: 24-bit
Sample Rate/s: 48kHz
Equivalent Noise: -131.5 dBV EIN
Gain Range: 76dB
USB Connectivity: 2 x USB-C connectors (dual audio interfaces)
Bluetooth Connectivity: Wide-band speech Bluetooth
MicroSD Card Transfer Rate: USB 3.0 130 MB/s
Screen: HDR with haptic feedback and auto brightness

Mechanical

Dimensions (mm): 305 x 270 x 60
Weight: 1950g
Included:1 x RODECaster Pro II
1 x SC27 USB-C to C cable
1 x USB-C Power Adaptor
1 x AC Power Cable

Notes: Designed for Serato and Algoriddim Djay, the long-awaited Mixon 8 Pro is a four-channel hybrid controller with detailed jogwheel displays. Standalone mixer and four FX paddles give versatility for creative mixing.

Supplier's Notes:
Enhanced jog wheels with real-time displays

Boasting sleek, touch-sensitive gun metal platters and high profile rims, the enhanced jog wheel design of the Mixon 8 Pro allows you to control your music precisely. And thanks to the new vivid on-jog displays, DJs are kept well informed with real-time track information, including virtual needle illumination, a playhead position indicator, and track time remaining or elapsed.

Four FX pedals for instant effects

As an industry first, the Mixon 8 Pro features 4 sturdy onboard FX Paddles, providing instant tactile control of all your effects. Each channel also has a 3-band EQ and dedicated sound colour filters to shape your music even more (LPF/HPF).

Stand-alone mixer inside

The powerful inbuilt standalone mixer with independent level meters for inputs and outputs gives you flexible connections to either turntables or media players so you can mix digital and analogue sources simultaneously (2x Phono/4x Line). For even more convenience, you can also route the dual Mic inputs (XLR/Jack) with dedicated talk-over functions into the mixer channels to perfectly EQ your live vocals with onboard controls.

Technical data

In- & outputs: XLR Master-Output, 6.3 mm jack Booth-Output (TRS), RCA Master-Output, 2x RCA-Input (Phono/Line), 2x RCA-Input (Line), 1x Combo-Mic-Input (XLR/jack (TRS)), 1x Mic-Input 6.3 mm jack (TRS), 1x USB-B, 1x USB-C/USB-B, 2x Headphones (6.3 mm/3.5 mm jack)
Dimensions: 657 x 68 x 391 mm
Dimensions docking station: 320 x 9 mm
Weight: 5,7 kg
Minimum system requirements: Please refer to the manufacturer's specifications for the system requirements of your DJ software.
Incl.: Controller, manual, USB cable (USB-A to USB-B), power supply (12V/3A)

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Third-generation version of NI's outstanding MIDI controller keyboard updates what was already a winning formula. Here in the 49-key version, offering outstanding control of software and immense playability.

Suppliers notes:
An intelligent keyboard controller in three size options, designed to be at the core of any studio. Virtual instruments meet the real world with seamless Kontakt integration and a high-resolution screen. Plus, polyphonic aftertouch delivers intuitive parameter control across all three models, in combination with weighted, hammer-action keys in the S88. All contained in an overhauled design that looks incredible and is built to last.

Dimensions: 802.2 × 323 × 86 mm
Weight: 5.5 kg

Thousands of instruments made real Virtual instruments are brought to life in a genuinely immersive experience. Whatever you're playing, get in-depth control and integration through advanced NKS technology. Find sounds quickly with intuitive on-screen navigation. Then fluidly adjust and play them thanks to intelligent auto-mapping. This unparalleled direct connection means you can play completely real-feeling Kontakt instruments, plus thousands of partner sounds, instruments, and effects, with no interruptions to your workflow.

Polyphonic aftertouch

Take expression one-step further and instinctively control parameters with the slightest pressure on each individual key. Modulate cutoff, pitch, vibrato, and much more without reaching for an extra control. All three models have an industry-leading keybed, developed in collaboration with Fatar to deliver the best possible polyphonic aftertouch experience.

Hardware specification

1 high-resolution colour screen with glass surface (1280 × 480)
CNC machined, bead blasted and anodized aluminium, 8 × encoder caps, 1 × 4D encoder cap, 2 × wheels (pitch and mod)
RGB illuminated pitch and mod wheels
New button-islands that form a continuous dustproof control surface and are grouped by function

Included software

Komplete Select
Komplete Kontrol Software
Stradivari Cello
Guitar Rig LE
Elements Suite
Hypha

System requirements

MIDI 2.0 compatible
Intel Core i5, Apple M1 (and equivalent or higher)
macOS 13 (Ventura) or higher (compatible with macOS 12 in MIDI
mode)
Windows 10 (latest service pack) or higher
8 GB RAM
An internet connection and a graphics card that supports Direct 3D 11.1 (feature level 11_0) or higher are required to download and activate this product. Once installed and activated, the product can be used offline.

Notes: Featuring a new cabinet, improved motor and a magnetic clamp to secure your record and speed up the cleaning process, the VC-S3 is Pro-Ject's flagship record cleaner, designed for larger collections. Great quality, great cleaning power.

Supplier's Notes:
The new VC-S3 is Pro-Ject's new premium record cleaning machine with completely new superior features. Vinyl records need a specific maintenance. The dry brush cleaning before playing the record is good to roughly remove dust. To effectively clean the grooves you need to wet clean the record. To achieve the perfect cleaning we also need a suitable cleaning fluid. Alcoholic cleaning fluids can destroy musical micro information of the grooves. That's the reason why Pro-Ject's designed our new eco-friendly non-alcoholic cleaning fluid called "Wash it 2". The new Wash it 2 is a pre-mixed liquid, so you don't have to dilute the concentrate yourself anymore. This avoids acidentally using unsuitable tap water for mixing. With Wash it 2 you can optimize the cleaning performance again. The VC-S3 is very powerful and cleans records completely in one to two revolutions.

Made in Europe!

The new magnetic clamp not only seals the record label from cleaning fluid to avoid damage on the label, it also speeds up the whole cleaning process. Place your record on the machine, put on the clamp and you are ready to go - no more tedious screwing of the clamp anymore. The robust easy to use metal arm is mechanically stable and focuses all suction power directly onto the record surface. Paired with new self-adhesive arm strip your records get cleaned perfectly. The large internal container (2,5 litres) collects used fluid and is effortlessly easy to empty. When using the Wash it 2 cleaning solution, the fluid will also evaporate in the container, meaning the container will almost never need to be emptied even after cleaning thousands of records. It shows fill-up capacity and guarantees no spillage of used cleaning fluid. The new VC-S3 is made in Europe with high quality materials and an excellent build-quality. With many practical features and excellent mechanical operation, the VC-S3 effectively combines industrial design appeal with an easy solution to great sound from your vinyl records.

Technical Specifications

Cleaning speed: 30 RPM
Included accessories: Brush
Vacuum Arm
Self-Adhesive Arm Strip
Magnetic clamp
Wash it 2 (100ml)
Power cable

Power connection: 110/120 or 230/240 Volt; 50 or 60 Hz

Dimensions: 415 x 325 x 272 mm (W x H x D)
Weight: 8,0kg

Please Note: Pro-Ject Record Cleaning Machines are not intended for commercial use. They are home-use products.

Notes: Desktop version of Plankton's modular saturation unit. A patchable combination of analogue distortion and digital processing, combined into a versatile standalone effects unit.

Supplier's Notes:
SPICE is a modular saturation unit capable of a huge variety of sounds and colors. From subtle tube warmness to extreme fuzz distortion.

Features:

Rackable (38HP eurorack) modular desktop unit.

8 CV inputs with led level indicators.

6 main functions: Prefilter / Digital / Analog / Mixer / Envelope Follower / Feedback

Prefilter: High Pass and Low Pass filters to shape the sound before being processed. Both controllable via fader + CV input.

Digital: 12 bit Bit Crusher / Bit mute, Biswap and Bit inversion + Sample Rate reducer. Both controllable via potentiometer and CV inputs. It also offer an analogue input control with led clip indicator and a low pass filter to smooth the output signal. All the code will be Open Source

Analog: 7 analogue distortion circuits selectable with a rotary encoder + a sweet resonant state variable filter. Drive and Cutoff parameters are controllable via potentiometer and CV inputs. 2 of the circuits use the new Korg NU-TUBE.

Mixer: Dry and Wet controls to mixed the processed signal with the clean one of the input. Both controllable via fader + CV input.

Envelope Follower: A dedicated envelope follower with gain control and normal and inverted outputs to convert an incoming signal to an envelope. With its output you can control any of the CV parameters and shape the processed sound in many creative ways.

Feedback: a triple feedback section that sends the Wet input to the Prefilter, Digital and Analog sections. It's capable from a subtle resonance to a collapsed hardcore self generating tone.

Semi-modular architecture with pre-patched sections that can be restructured using patch cables. Each section (minus the feedback) can be used as an independent function from the rest.

Notes: Rackable (38HP eurorack) modular desktop unit.

8 CV inputs with led level indicators.

6 main functions: Prefilter / Digital / Analog / Mixer / Envelope Follower / Feedback

Prefilter: High Pass and Low Pass filters to shape the sound before being processed. Both controllable via fader + CV input.

Digital: 12 bit Bit Crusher / Bit mute, Biswap and Bit inversion + Sample Rate reducer. Both controllable via potentiometer and CV inputs. It also offer an analogue input control with led clip indicator and a low pass filter to smooth the output signal. All the code will be Open Source

Analog: 7 analog distortion circuits selectable with a rotary encoder + a sweet resonant state variable filter. Drive and Cutoff parameters are controllable via potentiometer and CV inputs. 2 of the circuits use the new Korg NU-TUBE.

Mixer: Dry and Wet controls to mixed the processed signal with the clean one of the input. Both controllable via fader + CV input.

Envelope Follower: A dedicated envelope follower with gain control and normal and inverted outputs to convert an incoming signal to an envelope. With its output you can control any of the CV parameters and shape the processed sound in many creative ways.

Feedback: a triple feedback section that sends the Wet input to the Prefilter, Digital and Analog sections. It's capable from a subtle resonance to a collapsed hardcore self generating tone.

Semi-modular architecture with pre-patched sections that can be restructured using patch cables. Each section (minus the feedback) can be used as an independent function from the rest.

Dimensions
38 HP

Current Draw
195 mA +12V
160 mA -12V

Notes: Simple and straight to the point, ARS's five-band EQ allows you to tweak and adjust the balance of frequencies to get the most from your system. Pristine audiophile sound quality.

Supplier's Notes:
The MODEL-5000 5 Band Equalizer is designed to adjust to all genres of music, and various sound sources such as vinyl, CD and PC.

Source sounds remains lively, while 5 Band Equalizer allowing effective and precise equalization that is not possible with isolators.
Wide Q filter gives instantaneous adjustment.
ARS MODEL-5000 will become your essential item on the site.

* 5 bandwidth of frequencies, HI / HI MID / MID / MID LOW / LOW, are finely level-controlled.
* For the input sources, either RCA unbalanced jacks or XLR balanced jacks (2HOT) can be connected.
* For the output sources, both RCA unbalanced jacks and XLR balanced jacks can be connected simultaneously since both jacks has independent output circuits.
* Knobs have brims on the centre point to easily identified the centre with a little light in the clubs.
* 50 mm width intervals between knobs give smooth operation to improve DJ performance.
* No power switch avoiding accidentally turning power off while playing.
* Minimizing the power noise by designing the main circuit board and the power circuit board independently and setting them apart.

Specs

Frequency Response: +-1dB 20Hz-20Khz (With no EQ)
Input: RCA Unbalanced Impedance 20K Ohm/ XLR Balanced Impedance 40K Ohm
Output: RCA Unbalanced Impedance 600 Ohm/ XLR Balanced Impedance 50 Ohm
Maximum Output Level: +20 dB
Equalizer Control: 75Hz, 300Hz, 1Khz, 3Khz, 10Khz, 5 Bands
Adjustable Range: i12dB
EQ In/Out Switch: Selector switch on the right side of the front panel.
Power Requirement: US-115V/EU-230V(Selectable)
Power Consumption: 10w
Dimensions: Front Panel 1U (W)482 x (H)44 x (D)195 mm
Front Panel Colour: Black

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Eurorack modular synthesizer case designed to meet the demanding requirements of project and professional studio environments. The Structure EP-270 provides massive amounts of clean, quiet power housed in beautiful, angled hardwood enclosures, full of classic synthesizer styling.

Uncompromising power and craftsmanship combine to create this stunning studio case. The Structure EP-270 offers 270HP of module space with a combined 9 amps of robust power.

Notes: The Michigan Synth Works SY-1 Drum synth is a full size, exact replica of the Pearl SY-1 Syncussion. Every detail has been replicated from the original board layouts to the mechanical construction. The assembled version has been modernized to use current manufacturing processes while still using the original board layouts and all parts have been carefully chosen to match the behaviour of the original. Case, boards, and I/O Boards are all interchangeable with the original Pearl device

The Syncussion:

The Syncussion is a 2 voice drum synthesizer with two oscillators per voice and six different modes. Five modes mix and modulate the oscillators plus a noise channel. Each voice has controls for TUNE, DECAY, SWEEP amount, SWEEP Speed, Sweep up/off/down, LFO amount, and LFO speed, LFO Shape (Tri or Square), and sample and hold

OSC Modes:

A: One oscillator sound, at this position the regular drum synthesizer sweep can be effected.

B. Sound of one oscillator adjusting the other osciIIator frequency; produces a metallic sound.

C. Sound of a mix of two oscillator outputs; sound is similar to that of a vibraphone.

D. Sound of mix of two oscillator outputs; produces a low to high sweep and is done by hitting pad softly or hard; there is no connection to SWEEP SPEED and SWEEP RANGE

E. Sound of one oscillator adjusting the other oscillator frequency with a mix of noise; produces a sound similar to hitting thin metal.

F. Sound of only noise

Triggering:

The SY-1 is designed to be triggered via drum triggers which output a very low pulse signal. Modern 5V trigger signals (v-trig) can be used, how it i recommended experimenting with simple audio samples or more dynamic triggers. One of the more interesting features of the Syncussion is the dynamic response to the drum triggers and just sending a straight pulse which maxes out the trigger inputs does not do the device justice.

Tuning:

The original SY-1 uses a tune pedal to adjust the pitch of both oscillators while playing. This functionality has been retained in the original configuration but is of limited use without the pedal. The expanded version DOES have per voice CV control (1v/Oct) as well as the MIDI.
The Michigan Synth Works SY-1 is available in 3 different versions:

1. Original I/O Configuration: The inputs and outputs use regular 1/4" Mono phone plugs:

Trig 1 In - Trig 2 In - Mute - Tune (via Tune pedal) - Mixed Output

The SY-1 ships with a metal base panel but the DIY wood case can be used instead. It is provided UNFINISHED and sold separately.

What's included:
SY-1 Synthesizer
Universal Power adapter (100-240V, 12V DC out, Tip Positive)

Notes: The Michigan Synth Works SY-1 Drum synth is a full size, exact replica of the Pearl SY-1 Syncussion. Every detail has been replicated from the original board layouts to the mechanical construction. The assembled version has been modernized to use current manufacturing processes while still using the original board layouts and all parts have been carefully chosen to match the behaviour of the original. Case, boards, and I/O Boards are all interchangeable with the original Pearl device

The Syncussion:

The Syncussion is a 2 voice drum synthesizer with two oscillators per voice and six different modes. Five modes mix and modulate the oscillators plus a noise channel. Each voice has controls for TUNE, DECAY, SWEEP amount, SWEEP Speed, Sweep up/off/down, LFO amount, and LFO speed, LFO Shape (Tri or Square), and sample and hold

OSC Modes:

A: One oscillator sound, at this position the regular drum synthesizer sweep can be effected.

B. Sound of one oscillator adjusting the other osciIIator frequency; produces a metallic sound.

C. Sound of a mix of two oscillator outputs; sound is similar to that of a vibraphone.

D. Sound of mix of two oscillator outputs; produces a low to high sweep and is done by hitting pad softly or hard; there is no connection to SWEEP SPEED and SWEEP RANGE

E. Sound of one oscillator adjusting the other oscillator frequency with a mix of noise; produces a sound similar to hitting thin metal.

F. Sound of only noise

Triggering:

The SY-1 is designed to be triggered via drum triggers which output a very low pulse signal. Modern 5V trigger signals (v-trig) can be used, how it i recommended experimenting with simple audio samples or more dynamic triggers. One of the more interesting features of the Syncussion is the dynamic response to the drum triggers and just sending a straight pulse which maxes out the trigger inputs does not do the device justice.

Tuning:

The original SY-1 uses a tune pedal to adjust the pitch of both oscillators while playing. This functionality has been retained in the original configuration but is of limited use without the pedal. The expanded version DOES have per voice CV control (1v/Oct) as well as the MIDI.
The Michigan Synth Works SY-1 is available in 3 different versions:

Expanded I/O Configuration: The inputs and outputs use 1/4" Stereo to 1/4" (3 included) to greatly expand the capabilities of the device. The Mod input is open for user modification, factory mods will be available. Please contact for details.

Trig 1,2 In - Mod 1,2 In - Mute - Tune 1,2 CV in - Output 1, 2

The SY-1 ships with a metal base panel but the DIY wood case can be used instead. It is provided UNFINISHED and sold separately.

What's included:
SY-1 Synthesizer
Universal Power adapter (100-240V, 12V DC out, Tip Positive)
Expanded I/O: 3x 1.5m TRS 1/4" Phone to 2x TS 1/4" Phone

Notes: The Michigan Synth Works SY-1 Drum synth is a full size, exact replica of the Pearl SY-1 Syncussion. Every detail has been replicated from the original board layouts to the mechanical construction. The assembled version has been modernized to use current manufacturing processes while still using the original board layouts and all parts have been carefully chosen to match the behaviour of the original. Case, boards, and I/O Boards are all interchangeable with the original Pearl device

The Syncussion:

The Syncussion is a 2 voice drum synthesizer with two oscillators per voice and six different modes. Five modes mix and modulate the oscillators plus a noise channel. Each voice has controls for TUNE, DECAY, SWEEP amount, SWEEP Speed, Sweep up/off/down, LFO amount, and LFO speed, LFO Shape (Tri or Square), and sample and hold

OSC Modes:

A: One oscillator sound, at this position the regular drum synthesizer sweep can be effected.

B. Sound of one oscillator adjusting the other osciIIator frequency; produces a metallic sound.

C. Sound of a mix of two oscillator outputs; sound is similar to that of a vibraphone.

D. Sound of mix of two oscillator outputs; produces a low to high sweep and is done by hitting pad softly or hard; there is no connection to SWEEP SPEED and SWEEP RANGE

E. Sound of one oscillator adjusting the other oscillator frequency with a mix of noise; produces a sound similar to hitting thin metal.

F. Sound of only noise

Triggering:

The SY-1 is designed to be triggered via drum triggers which output a very low pulse signal. Modern 5V trigger signals (v-trig) can be used, how it i recommended experimenting with simple audio samples or more dynamic triggers. One of the more interesting features of the Syncussion is the dynamic response to the drum triggers and just sending a straight pulse which maxes out the trigger inputs does not do the device justice.

Tuning:

The original SY-1 uses a tune pedal to adjust the pitch of both oscillators while playing. This functionality has been retained in the original configuration but is of limited use without the pedal. The expanded version DOES have per voice CV control (1v/Oct) as well as the MIDI.

MIDI equipped I/O Configuration: This is the same as the expanded i/o configuration but adds MIDI in place of the MOD input. The MIDI responds to velocity to gate level and pitch for each channel. 2 TRS-TS and TRS MIDI cables are included

Trig 1,2 In - MIDI In - Mute - Tune 1,2 CV in - Output 1, 2

The SY-1 ships with a metal base panel but the DIY wood case can be used instead. It is provided UNFINISHED and sold separately.

What's included:
SY-1 Synthesizer
Universal Power adapter (100-240V, 12V DC out, Tip Positive)
MIDI I/O: 2x 1.5m TRS 1/4" Phone to 2x TS 1/4" Phone, 1x 1.5M 3.5mm TRS to MIDI, 1x TRS 3.5mm to 1/4" TRS Adapter

Notes: ENNER is a very expressive sound tool that can generate bits, pads, FX, noises, clicks, glitches, but also function as a cool vocal mic with built-in analogue FX and much more! A musician with a rich imagination and who's experienced in playing ENNER can perform an entire exciting gig using just this synth.

As an instrument, ENNER is a unique analogue synthesizer with the key principle being that all signals that make sound pass through and are managed by your body. Your hands become the central part of the circuitry. Touching different contact pads with different parts of your fingers and palms with different amounts of pressure, letting signals pass through your body defines the mixing, volume, timbre, feedback and other parameters of synthesis. Human skin has much more complex electric properties than we think. The skin provides not just resistance but also some capacitive properties and even nonlinear dependence of conductivity from current, its direction and time during which the current was applied. All of this affects the sound, making you the key part of the synthesis process.

All pots of ENNER are metallic and also function as inputs or outputs. Touching a pot can change not only the parameters but also patch the audio signals.

ENNER consists of:

The array of filters with fixed frequency properties (the triangle in the centre): the stereo high pass filter (HPF), the stereo bandpass filter (high mid - BPFH), the stereo bandpass filter (low mid - BPFL), the stereo lowpass filter (LPF). Stereo means that the filters have separate inputs for left and right channels as well as separate outputs. Sliding on the filters' pads with your fingers you can create a rich stereo image where each channel may have not only individual volume properties but also timbral ones. The outputs of the filters are mixed together and connected to the main output. Also in the triangle, you have a stereo direct input (DIR) that lets you bypass the filters.

The modulated stereo delay. The input of the delay is the two pads on the top of the triangle (DLY blue). The output of the delay is mixed with filter output and connected to the main output. Also, you have delay output connected to the pads placed on the left and right sides from the top of the triangle (DLY orange) that lets you create feedback and other interesting effects. The delay has two separate lines (left and right) with individual TIME controls (BPEMR pots), common FEEDBACK and the common pot that defines the amount of self-modulation (BIZZARE). The BPEMR pots are also touch inputs for delay time modulation.

On the right side of ENNER, there is a five-voice synthesizer with individual adjustment of frequency for each voice (TUNE knobs) with the possibility to change the pitch of all voices simultaneously (PITCH knob). TUNE knobs are also the outputs of the voices, so by touching them you can patch the voices to the filter's inputs. The synthesizer has separate output pads for each voice (pads OUT 1-5), individual modulation inputs (MOD 1-5) and ring modulation outputs (the RING 12, 23, 34 numbers indicate which voices are sources for the ring modulation). Connecting MOD and OUT pads of one voice with your fingers will pitch it up. The fifth voice has an additional modulation pad MOD 5- which can shift the pitch of the fifth voice down (connect it to +12 pad or any pad that has some positive signal including the output of the fifth voice).

On the left side of ENNER, there is the second synth that has one master generator, the output of which is divided six times by two with individual outputs for each stage of division (PULSE 1-6). This synth is aimed at creating rhythmical clicks, basses and octave tones. The frequency of the master generator is defined by the TEMPO knob. The output pads &1,2,3 are logical multiplications of different PULSE outputs giving additional and more complex rhythm combinations.

ENNER is also an electro-acoustic noise instrument. It has a piezo pickup attached to the front panel that captures sound from the casing itself. There is metallic spring and you can attach rubber bands to the panel to create various acoustic sounds. The piezo mic can capture clicks and scratches you make with your fingers, and it also allows you to create filtered feedback. Not only that, it can even capture your voice singing over the panel! To get sound from the piezo you have to connect the PIEZO OUT pad with some filters or delay inputs. Applying filters and delay on the piezo out while the panel works as a mic, catching the audio signal from the speakers connected to the ENNER output lets you create very cool acoustic feedback-based effects. PIEZO GAIN adjusts the piezo sensitivity.

The bottom of the triangle (NOISE pad) is the output of static pink noise.

External in (EXT socket and EXT pad) lets you send an external audio signal to ENNER and process it through the array of filters, delay and other ENNER stuff.

All of these features make ENNER a simple yet powerful kit of sound sources and FX that give you a rich and diverse sound palette with many possible playing techniques that you can change very fast as there is no other control over the sound other than your touches.

Specs

Array of filters

Pads DIR - direct input (no filters)
Pads HPF - highpass filter in
Pads BPFH - bandpass filter high mid in
Pads BPFL - bandpass filter low mid in
Pads LPF - lowpass filter in
(L - left channel, R - right channel)

Pink noise generator

NOISE - noise output

Delay

Pads DLY(blue) - delay in
Pads DLY(orange) - delay out
(L - left channel, R - right channel)
Pots BPEMR - delay time (L and R) also time modulation inputs
The UROBOROS pot - feedback (both channels)
Pot BIZZARE - delay self-modulation

Piezo

Pad PIEZO OUT - the output
Pot PIEZO GAIN - piezo amplification (also piezo output)

The five-voice synth

Pads OUT 1-5 - outputs of the voices
Pads MOD 1-5 - modulation inputs of the voices (try to connect them with OUT)
Pads RING 12, 23, 34 - outputs of ring modulators that multiply outputs of different voices
Pad MOD 5- - an additional modulation input for the fifth voice (try to connect it with +12)
Pots TUNE 1-5 - frequency of the voices (also voices outputs)
Pot PITCH - transposing all voices at once.

Rhythm\Bass synth

Pads PULSE 1-6 - output of binary dividers
Pads &1, 2, 3 - additional outputs that are logical AND of different PULSE outputs.
Pot TEMPO - the frequency of the source generator

External

Socket EXT - external in
Pad EXT - connected to EXT socket tip

Power

+12V center + 0.2A. ENNER requires a good stabilized and filtered PSU. We recommend contemporary switching mode PSUs with a wide input range. The PSU is included.

Grounding

In order that when playing on ENNER there would be no hum from the electricity grid interferences, the device must be properly grounded! A normal grounding connection at the electric socket, which is carried through the power cord to your audio equipment to which the ENNER is connected, is sufficient.

What's in the kit:

ENNER
12V center plus PSU
Several rubber bands

Notes: Designed for Algoriddim djay PRO AI and fully compatible with the Neural Mix functions for real-time stem mixing, the RMX-95 is a next-generation digital DJ mixer with built-in dual 24-bit interface.

Supplier's Notes:
Standard redefined

The professional RMX-95 4+1 channel club mixer blurs the lines between analogue workflow and digital technology. The RMX-95 is a cutting-edge, extraordinarily versatile creative tool thanks to its dual-USB 2.0 interface, redesigned effects section, optional MIDI mapping of all controls and smooth integration of the djay PRO AI DJ software. The club mixer has a familiar and user-friendly interface, making it suitable for both professional and hobby DJs.

Connections galore

The RMX-95 also excels in terms of connectivity: Four CD, two line, and two phono inputs are available on the four input channels. The separate microphone channel has two microphone connections (1 x jack, 1 x jack/XLR combination jack) and an additional AUX input. The master output offers RCA or balanced XLR cable connections. The booth output has two jack connections for stereo operation. However, it can also be used in mono mode. A recording device can be connected to the Rec output via RCA jacks to record DJ sets - regardless of the master output level. Last but not least, the DJ mixer has two jacks for headphones.

Maximum flexibility:

Dual-USB audio interface

Superior 24-bit sound quality is provided by the ten inputs and outputs of the high-quality dual-USB 2.0 interface. The two USB ports allow smooth transitions between DJs and maximum flexibility when using different setups in a single club night. In addition, the active USB hub enables the connection of additional USB devices.

Fully digital architecture

The RMX-95's digital architecture transforms the DJ mixer into an individually mappable MIDI controller. As part of this, the setup menu provides a wealth of customisable options, such as EQ frequency range, Neural Mix™ EQ mode, audio interface routing, and zone routing for the booth output.

DVS-enabled for djay Pro AI & Neural Mix

The RMX-95 works with Algoriddim djay PRO AI via plug and play. The DJ app's ground-breaking Neural Mix function lets you isolate beats, melodies, and vocals in the mix in real time. The RMX-95 supports djay PRO AI's advanced DVS integration with Mac, PC, iPhone and iPad. The DJ software is also compatible with streaming services like Tidalj, Soundcloudj, Beatport Linkj or Beatsource Linkj.

Crisp cuts and smooth blending
The adjustable curve of all faders provides DJs with the creative flexibility they want while mixing. Turntablists and scratch wizzards can also upgrade the crossfader with the contactless RMX innoFADER.

Indestructible design
The club mixer's sleek black metal surface is not only eye-catching but also highly durable. The solid metal housing and hard-wearing metal shafts in all of the built-in potentiometers and switches provide a long service life, even with heavy club use.

RMX-95

High performance DJ Club Mixer with premium sound
24-bit dual 10 In/Out USB audio interface and USB hub
Beat FX & sound filters with frequency and resonance control

Technical data

Frequency Range: 20 Hz - 20 kHz +2/-3dB
Inputs: 7x line RCA, 2x phono RCA, 1x mic combo-XLR/jack, 1x mic 6.3mm jack (TR), 2x USB port
Outputs: master XLR (balanced), master RCA (unbalanced), booth (TRS) (balanced), rec RCA (unbalanced), 1x headphones 6.3mm jack, 1x headphones 3.5mm jack
EQ range classic at 70 Hz, 1 kHz, 13 kHz: -26 dB/+9 dB
-EQ range isolator at 70 Hz, 1 kHz, 13 kHz: -90 dB (total kill)/+9 dB
EQ range mic at 100 Hz, 10 kHz: -12 dB/+ 12dB
EQ headphones at 100 Hz, 10 kHz: -29dB
Power Source: AC100-240V, 50/60Hz
Power Consumption: 29 W
Dimensions: 322(W) x 387(D) x 107.5(H) mm

Notes: A unique graphical take on an oscillator design, E-RM's brand-new polygonal synthesis approach is unlike anything else we've seen. Stereo oscillator capable of a huge range of timbres. Innovative stuff.

Supplier's notes:
The polygonal synthesis is a kind of graphical complex amplitude shaping method. With the help of the built-in modulation sources, polygonal synthesis in polygogo opens up a wide range of sonic possibilities from clicky pinged sequences to unique dark thunderstorms, bass lines, leads and colored noise.

This mighty stereo oscillator impressed the audience with its wide range of possible timbres. The idea of sculpting a shape on the screen of the module that then translates into sound works really well and invites the user to interact with the module.

Notes: Explore modulation beyond the standard ADSR with Verbos's complex polyphonic envelope, opening up the potential of ADAsR and AHDsR slopes. Use the four envelopes independently or trigger sequentially in three separate modes.

Supplier's Notes:
The Verbos Polyphonic Envelope module is a set of four envelope generators which can be used together or independently. Cascade logic allows the four envelopes to trigger sequentially with subsequent envelopes starting at the Hold, Decay or End of the previous envelope.

Each envelope offers its own gate input, CV output and end pulse output, so it can be used in up to four-voice polyphonic patches. The three skew controls allow the times to change as each new envelope is switched on. All parameters can be voltage controlled.

Power consumption: 75mA at +12 V and 30mA at -12 V

HP : 22

Notes: Pro-quality record cleaning system from Dutch vinyl specialists Tonar. Ultrasonic cleaning aims to remove dust and dirt without damaging the grooves. Highly effective, gentle care for 7-inch, 10-inch and 12-inch records.

Supplier's Notes:
The Tonar Knosti Disco-Antistat Ultrasonic vinyl washing machine combines high-tech ultrasonic cleaning with the proven goat hair brush system. This ensures gentle, groove-deep cleaning of your records and an audible improvement in the sound image. During operation, the special anti-static cleaning fluid is permanently clarified by a filter system and dirt particles are filtered out to minimise impurities in the fluid and thus achieve the best possible cleaning result.

The Tonar-Knosti Disco-Antistat Ultrasonic set includes:
Ultrasonic record washer
200ml cleaning concentrate Disco-Antistat Ultraclean
1 litre Disco-Antistat BiDest, high-purity water
1 microfibre cloth
Label cover incl. axle with magnetic coupling
Power supply 230 VAC/12 VDC 3A
1 drying stand
1 sponge brush
1 Mixing bottle (for preparing the cleaning liquid from Disco-Antistat Ultraclean and Disco-Antist BiDest)

Some features of the Tonar Knosti Disco-Antistat Ultraclean: The cleaning time can be conveniently adjusted to the degree of soiling of the record, supported by a functional display. A clearly visible progress indicator informs about the cleaning status at a glance.

After use, the aged cleaning liquid can be conveniently filled back into the bottle at the touch of a button via a built-in pump. The permanent filtering of the cleaner prevents the liquid from accumulating dirt. Thus, a consistent cleaning result is achieved.

Thanks to the innovative magnetic coupling, inserting and removing the record is quick and easy. Driven by an electric motor, the record rotates evenly in the tank, thus achieving a homogeneous treatment with ultrasound.

What is Ultrasonic cleaning?

Ultrasonic cleaning works through high-frequency sound waves transmitted through liquid to scrub clean the surface of immersed parts. The high-frequency sound waves agitate the liquid solution, and cause the 'cavitation' of the solution's molecules. Cavitation means that bubbles are formed when sonic energy creates a void (or cavity) which gets trapped as a bubble in the liquid.
These microscopic bubbles implode with such force that contaminants adhering to surfaces are dislodged.

Hence, through ultrasonic cleaning, surfaces are cleaned through implosions of tiny bubbles.

The Tonar Knosti Disco-Antistat has a powerful ultrasonic transducer that generates the cavitation bubbles that act directly on removing the dirt from the record. The ultrasonic waves also reach places that are inaccessible to conventional cleaning methods and ensure cleanliness down to the depth of the groove. The loosened dirt particles are then wiped off on the well-known Disco-Antistat soft goat hair brushes.

Notes: Inspirational west coast sounds from one of the masters. Additive oscillator with eight harmonics, direct outputs and powerful CV control to scan, tilt and mix the waveforms.

Supplier's Notes:
For the first time in Eurorack, this oscillator module provides outputs for the first 8 harmonics as sine waves. Also included are triangle, saw, square waves.

A voltage controlled mixer with various methods of address allows the user to scan, tilt and mix the harmonics from both panel and external voltage control. It is built on a discrete, all analog triangle core with an old school discrete transistor exponential converter. It has inputs for linear and exponential FM, the exponential with a reversing attenuator. Of course there's a 1 volt/octave trimmed CV input as well.

Power consumption: 120mA at +12 V and 90mA at -12 V

HP : 32

Notes: One of the most impressive granular synthesis approaches in Eurorack, combining looping and granular effects with buffer sizes up to five minutes. Hugely creative and powerful dual-module setup.

Supplier's Notes:
There's a long history behind the granular concept and many reinterpretations of it's core principles, this is ADDAC's take on it.

In a loose description digital Granular refer to pieces of sound files being played at the same time with slight or completely different parameters originating what is commonly referred to as granular clouds. Normally there's a buffer size from which the granular engine snips it's pieces from and plays them according to the parameters set. This buffer size is normally small in size where grains are so small that can reach the hearing spectrum and be heard as a sort of ever changing complex wavetable, this is the principle behind granular synthesis.

ADDAC have added the possibility of long buffer sizes up to 5 minutes, allowing "softer" approaches to the granular principle using it as an effect that can generate from "accidental" effects like slight "stutters" to extreme processing and transformation of any incoming audio signal.

This module is conceptually deep but easy to grasp and operate as all controls are in its dedicated panel, all jack inputs and outputs have its own separate panel to allow no compromise when playing it's controls.

There are three main sections in this module:
Looper Engine: The Looper is where all the Real-Time recording happens. The audio input feeds the recording buffer, multiple controls allow to record and play loops into a list so that any sample in the list can be accessed at ay time and more acting as a standard looper
Granular Engine: The Granular acts upon the buffer of whatever LOOP is selected.
Output Mix The output mix allow individual control for the Dry Input, Looper Volume and Grains Volume.
Besides these main sections there's also a simple strip down MENU mainly used to LOAD and SAVE Banks, no Menu diving guaranteed.

For more detailed info, please refer to the User's Guide.

Audio Specs:
Audio input: Stereo, 16bit 44.1Khz
Audio output: Stereo, 16bit 44.1Khz

Tech Specs:
32HP + 13HP
4.5cm deep
240mA +12V
70mA -12V

Notes: Latest update to a modern classic drum machine. Pure analogue sound and rock solid build. Externally untouched but now with revamped internal circuits and USB MIDI. Also available with new, improved trigger inputs.

Supplier's Notes:
Introducing the brand new update to the classic drum and percussion synthesizer VERMONA DRM1. The DRM1 is a key part in Vermona's history. Its first generation, released in the 90s as Syncussion DRM1, caught wide attention. The MKII-version then continued and broadened the success and breathed new life into the VERMONA brand at the turn of the millennium. With the DRM1 MKIII, that Vermona have been building since 2006, it has now been a total of 25 years of DRM1! This makes it one of the longest-lived electronic musical instruments. And launching the next quarter-century is this analog drum synthesizer from VERMONA.

DRM1 MKIV: Familiar, yet evolved

At first glance, you may not notice any difference from its predecessor. Indeed, from the outside, there isn't any! The overall concept and user interface have remained the same: There are eight instrument channels, each with nine knobs for sound shaping, pan and volume control. The DRM1 is a musical instrument, a creative tool that wants to be touched and played.

Instead of trying to reinvent or change an already well-proven external design, with this update to version MKIV Vermon decided to focus on the inside. Time was taken to thoroughly listen into the circuits and put energy and care into its details: Thoughtfully tweaking frequency ranges, revamping control curves, adjusting levels and redesigning sub-circuits. The goal was to make the DRM1 MKIV the best drum synthesizer Vermona have ever built!

DRM1 MKIV: Sociable and dynamic

To make integration into your studio more comfortable, the DRM1 MKIV was equipped with USB-MIDI in addition to the standard MIDI connections.

The optional trigger inputs have been significantly upgraded. Beyond gate pulses, they now also accept different voltage levels for triggering the instrument channels dynamically. The DRM1 MKIV with trigger inputs can also convert the analog signals into MIDI notes via USB or the newly added MIDI OUT connector making it an incredibly versatile MIDI interface.

Whether you're controlling the DRM1 MKIV via a DAW, a hardware sequencer, or a modular system, you'll have the proper connection and further the ability to send the MIDI notes to additional devices.

DRM1 MKIV: More power under the hood

The power supply of the DRM1 MKIV is completely new. It now works anywhere in the world, without having to manually change the mains voltage. This is a huge relief for all of you who use the instrument at live shows. No less important: it works more energy-efficient than the old one!

Notes: Latest update to a modern classic drum machine. Pure analogue sound and rock solid build. Externally untouched but now with revamped internal circuits, USB MIDI and dynamic trigger inputs.

Supplier's Notes:
Introducing the brand new update to the classic drum and percussion synthesizer VERMONA DRM1. The DRM1 is a key part in Vermona's history. Its first generation, released in the 90s as Syncussion DRM1, caught wide attention. The MKII-version then continued and broadened the success and breathed new life into the VERMONA brand at the turn of the millennium. With the DRM1 MKIII, that Vermona have been building since 2006, it has now been a total of 25 years of DRM1! This makes it one of the longest-lived electronic musical instruments. And launching the next quarter-century is this analog drum synthesizer from VERMONA.

DRM1 MKIV: Familiar, yet evolved

At first glance, you may not notice any difference from its predecessor. Indeed, from the outside, there isn't any! The overall concept and user interface have remained the same: There are eight instrument channels, each with nine knobs for sound shaping, pan and volume control. The DRM1 is a musical instrument, a creative tool that wants to be touched and played.

Instead of trying to reinvent or change an already well-proven external design, with this update to version MKIV Vermon decided to focus on the inside. Time was taken to thoroughly listen into the circuits and put energy and care into its details: Thoughtfully tweaking frequency ranges, revamping control curves, adjusting levels and redesigning sub-circuits. The goal was to make the DRM1 MKIV the best drum synthesizer Vermona have ever built!

DRM1 MKIV: Sociable and dynamic

To make integration into your studio more comfortable, the DRM1 MKIV was equipped with USB-MIDI in addition to the standard MIDI connections.

The trigger inputs have been significantly upgraded. Beyond gate pulses, they now also accept different voltage levels for triggering the instrument channels dynamically. The DRM1 MKIV with trigger inputs can also convert the analog signals into MIDI notes via USB or the newly added MIDI OUT connector making it an incredibly versatile MIDI interface.

Whether you're controlling the DRM1 MKIV via a DAW, a hardware sequencer, or a modular system, you'll have the proper connection and further the ability to send the MIDI notes to additional devices.

DRM1 MKIV: More power under the hood

The power supply of the DRM1 MKIV is completely new. It now works anywhere in the world, without having to manually change the mains voltage. This is a huge relief for all of you who use the instrument at live shows. No less important: it works more energy-efficient than the old one!

Notes: A full-on digital modular system in a single module. Eight-voice polyphony, audio processing and CV/MIDI functionality, all customisable via the PC/Mac editor. Serious DSP power in 22 hp.

Supplier's Notes:
Integrate the power of EaganMatrix Sound Technology into your Eurorack! The EaganMatrix Module is a full-featured EaganMatrix Sound Engine for Eurorack, and can be controlled by control voltages and/or Midi. This versatile module can act as a sound source, a sound processor, a CV source (via connection to an external Control Voltage Converter), a Midi source, or a customizable combination of all these capabilities.

The EaganMatrix Module provides a truly versatile framework for both studio and live performance. Flexibility is key, due to its audio inputs and outputs, integrated CV inputs, external CV outputs (via Control Voltage Converter), and robust implementation of MPE and MPE+ Midi.

A single EaganMatrix Preset can give completely different sonic results, depending on how it is patched into a particular Eurorack ecosystem. Hundreds of System Presets are included with the EaganMatrix Module. In addition, an external cross-platform (Mac and PC) Haken Editor may be connected to modify and customize the supplied EaganMatrix System Presets, or create completely new presets from scratch.

The EaganMatrix Sound Technology, originally created for the gesturally highly sensitive Continuum, is now available to you in a Eurorack module. The EaganMatrix Module will quickly become a 'goto' component in your modular sound design and sonic composition.

Haken Audio's EaganMatrix Module offers:
Polyphony: Nominal 1, Maximum 8
Direct CV note control is limited to 1 voice at a time, but higher polyphony avoids voice stealing when EaganMatrix presets have long decays, and higher polyphony is often useful for Midi input.
4 Per-note CV Inputs: W, X, Y, Z
Gate (W) - Triggers at 1V, with max range -10V to +10V
Pitch (X) - 1V per octave, with programmable offset for Middle C; useful input voltages are a subpart of -10V to +10V (depends on the programmable offset selected)
Timbre (Y) - Function depends on EaganMatrix preset; voltage range is normally 0V to 5V, but -5V to +5V can be useful when combined with a programmable offset
Loudness (Z) - normally 0V to 5V, but -5V to +5V can be useful when combined with a programmable offset
4 Global CV Inputs: i, ii, iii, iv

Functionality depends on EaganMatrix preset; these CV affect all voices (notes from WXYZ and Midi); each global CV is normally 0V to 5V, but -5V to +5V can be useful when combined with a programmable offset
2 Analog Audio Inputs: Left and Right, or Mono
2 Analog Audio Outputs: Left and Right, or Mono Sum
-12dB switch selects between Eurorack Level and Line Level
Midi over USB
Allows bidirectional MPE and MPE+ connection to other devices; allows connection to the Haken Editor for editing and archiving EaganMatrix presets (USB-A cable included with purchase)
Universal 3.5mm Midi In (Type A, Type B, and TS)
Allows connection to other Midi devices without need of computer or USB (adapter to 5-pin DIN Midi In included with purchase)
Type B 3.5mm Midi Out
Allows connection to other Midi devices without need of computer or USB (adapter to 5-pin DIN Midi Out included with purchase)
i2c Port for Communication to the Control Voltage Converter
(a switch selects between 3.5mm Midi Out and i2c functionality)
12 Switches, 1 Rotary, and LED Matrix

A menu system allows stand-alone operation without need of computer, and provides monitoring for notes being played and CV input levels
The EaganMatrix is a modular digital synthesizer invented by Edmund Eagan, utilizing a DSP engine designed by Lippold Haken. This is the same EaganMatrix Sound Technology internal to the Continuum Fingerboard, the ContinuuMini, and Expressive E's Osmose keyboard. The EaganMatrix allows the user to finely craft their musical sound by digitally connecting audio and control modules via a patching matrix. The EaganMatrix Module contains a sophisticated digital modular patching world of its own, ready to interact with your other Eurorack modules to make musical results never before possible.

Power and size

The EaganMatrix Module requires +12V, +5V, ground, and -12V from your Eurorack enclosure.

A 16-pin standard Eurorack power cable is included with purchase.

Current requirements: 25mA at +12V and -12V. 300 mA max (190 mA avg) at +5V.

The processing power of the EaganMatrix Module is 2x, same as the ContinuuMini.

The EaganMatrix Module dimensions are 22 HP and 3cm depth.

Notes: Numark take on the mid-range controller market with this excellent offering, powered by the Engine DJ OS. Built-in Wi-Fi and speakers plus large 7-inch touchscreen for intuitive, creative mixing.

*** Update March 2024- Engine DJ 3.4 Performance Software for Hardware (OS) ***

New Features
Bluetooth Audio Input and Keyboard Connection for Supported Devices

Bluetooth Audio Input - Wirelessly play audio from a Bluetooth-capable device on your supported Engine DJ hardware

Assign to any individual hardware channel or main audio output
Assign to layer A or B on the Denon DJ SC6000 and SC6000M
Bluetooth transport controls allow you to play, pause, and track skip using the touch screen or hardware controls when connected to a capable Bluetooth device
Hardware screen displays Track Title, Artist, and track progress when connected to a capable Bluetooth device

Bluetooth Keyboard Support - Search for songs on your Engine DJ hardware more quickly and efficiently
Bluetooth menu option in the Control Center allows you to connect and manage Bluetooth keyboards and audio devices

Additional Bluetooth Compatibility Information

It is recommended that you confirm the Bluetooth connectivity and functionality of your computer, smartphone, or other device before using it in a live situation

Not all Bluetooth devices and audio applications provide support for Bluetooth Transport controls and track information

Track Progress is not updated on Engine OS when it is adjusted using the originating software/app

Engine DJ Preparation Software (Desktop)
Improvements and Fixes

Fixed an issue where sync manager export would take longer if SoundSwitch content is being packed

Fixed an issue where tracks would not pack via drag and drop if there are 2 drives with the same or similar names connected

Various other stability enhancements and improvements


Supplier's Notes:

The Mixstream Pro operates on Engine DJ OS, the ever-evolving embedded software platform that powers forward-thinking DJ hardware in DJ booths and on stages worldwide. Equipped with intuitive and familiar touchscreen workflows, lighting fast library navigation and song loading, expanded connectivity, plus a multitude of performance features, Engine DJ provides DJs with the tools they need to always be at their creative best.

BuiltiIn WiFi for streaming music- No laptop required to access millions of songs from top streaming services.

Built-in Speaker Monitors- Instant audio gratification! Start the party with the high-quality, custom-tuned built-in speakers.

Play With Your Music Like Never Before- The large, 7" high-definition touchscreen is your gateway to Engine DJ and hands-on control of your music.

Wireless Smart Lighting Control- Make your Philips Hue smart home lighting dance to the music for the ultimate party atmosphere.

Connect- WiFi | Philips Hue | DMX

Plug into an entire universe of music with the onboard WiFi. Wirelessly sync to Philips Hue smart home lighting for on-screen control of beat-synchronized light shows and custom color selections. DJs can take things even further with never-before-seen onboard control over DMX lighting.

Stream- Streaming Apps | Personal Cloud | No Computer Required

Experience the freedom of standalone streaming without the need for a laptop. Access millions of tracks from TIDAL, Beatport/Beatsource Streaming, Soundcloud GO+, and your personal Dropbox cloud. Tracks are buffered into internal memory for uninterrupted fun during your next party or gig.

Play- Engine DJ | Built-In Speakers | Pro DJ Features | USB/SD Card Slots

With the Engine DJ embedded operating system, an ever-evolving set of pro-level DJ features are literally at your fingertips via the 7" HD touchscreen. The USB and SD Card slots make it easy to access your current music library, and the high-quality, built-in speaker monitors let you practice and play whenever and wherever you like.

Powered by Engine DJ- The Mixstream Pro operates on Engine DJ OS, the ever-evolving embedded software platform that powers forward-thinking DJ hardware in DJ booths and on stages worldwide. Equipped with intuitive and familiar touchscreen workflows, lighting fast library navigation and song loading, expanded connectivity, plus a multitude of performance features, Engine DJ provides DJs with the tools they need to always be at their creative best.

Specs

Frequency Response: 20 Hz - 20 kHz +/- 1 dB
Dynamic Range: > 114 dB (A-weighted)
Signal-to-Noise Ratio: > 94 dB (A-weighted)
Headroom- Mic: > 16 dB, Outputs: > 16 dB, Channel Separation: < -110 dB (1 kHz, unity)
T.H.D.- Line: < 0.01% (1 kHz, unity), Microphone: < 0.05% (1 kHz, unity)

Speakers

Frequency Response (speakers) 20 Hz - 20 kHz +/- 1 dB

General

Analogue Input

Microphone: -40 dBu (unity), -60 dBu (minimum)

Analogue Output

Master, Balanced: +20 dBu (maximum), +4 dBu (unity)
Master, Unbalanced: +16 dBu (maximum), 0 dBu (unity)
Headphone Output: < 30 mW

Connections- Audio Outputs

2 XLR outputs (main left/right, balanced)
1 RCA output pair (main left/right, unbalanced)
1 1/4" (6.35 mm) stereo output (headphones)
1 1/8" (3.5 mm) stereo output (headphones)
Audio Inputs: 1 1/4" (6.35 mm) microphone input
Other: 2 USB port (for USB drives), 1 USB port (to computer), 1 SD card slot, 1 power adapter input

Power
Connection: DC, Center Positive

Voltage: 12.0 V 3.0 A

Dimensions (width x depth x height): 22.3" x 11.2" x 2.9"/566 x 284 x 74 mm
Weight 8.11 lbs. / 3.68 kg

Notes: Flagship instrument based on NI's excellent Maschine software but presented here in standalone format as an all-in-one groovebox, capable of creating everything from beats to synths and samples.

Supplier's Notes:
MASCHINE+ is a sampler, a drum machine, a synth, and an on-stage superpower. In short, it's whatever you make it. Leave the laptop behind, jam with your other gear, and create beats in minutes with a wealth of on-board sounds, instruments, and effects.

It's the iconic MASCHINE workflow, with fewer strings attached.

Standalone means more focus, more freedom, and more music making. Plug in, power up, and get creating straight away in the embedded MASCHINE+ production environment - from first ideas to finished tracks. Dial in effects to tweak your sounds, or sample audio and make it your own with an intuitive interface designed to keep the creative juices flowing. And if you want to bring your ideas into a DAW, copy them over, and boot up the MASCHINE software on your computer to pick up where you left off.

As well as its classic groovebox workflow, MASCHINE+ includes MASCHINE+ Selection: A dedicated package of nine synths and sampled instruments, 35 effects, and seven Expansions (including two of your own choosing) that work seamlessly in standalone mode. It includes heavy-hitters like MASSIVE, FM8, MONARK, PRISM, the MASCHINE Factory Selection, RAUM, and PHASIS. That means its 16 pads can sound like a dusty vintage drumkit, a warped wavetable lead, or an organic modal synth - pretty much anything you can think of if you flex your sound design skills.

Whether you're digging records or ripping radio edits, record any sound into MASCHINE+ and quickly chop and stretch the results into your own custom kits. Or transform and twist them in real-time with the Audio plug-in. The same goes for guitars, vocals, drums, and anything else - more sounds means more creative ways to make music.

Bring real expression to live performances with intuitive control over your music - tap out beats, run arpeggiators, or tweak synth melodies in real time. MASCHINE+ is an intuitive live sequencer, a fully-fledged groovebox, and a powerful performance synthesizer rolled into one.

Clips let you arrange your ideas with even more freedom. Create transitions across scenes, add unique variation to patterns, record MIDI directly into the full arrangement, and freely add audio wherever you need it. Once you've fleshed out your ideas, you can use MASCHINE+ as a powerful tool to push tracks past the finish line.

Play and sequence outboard gear and capture the results, or manipulate external audio in real time with effects. MASCHINE+ can control, mix, and manipulate the rest of your setup with MIDI, line, and mic inputs to bring everything together instantly. And if you want to work with a computer, it doubles up as a classic MASCHINE controller too.

MASCHINE+ is Wi-Fi enabled, which means you can install new sounds, instruments, and effects at the touch of a button, without a computer in sight. When it comes to jamming with others or playing out live, keep in sync with other music apps, DAWs, and compatible gear with Ableton Link.

Need more sounds? Expansions are great for giving MASCHINE+ some sonic love, with presets for its synths, one-shot samples, loops, and kits.

AUDIO INTERFACE SPECIFICATIONS

Line-In
Full Scale Level: +18,6 dBu
Dynamic Range: 100 dB
THD+N: 0.003 %
Frequency Response:: 20Hz-20kHz +/- 0.1 dB
Crosstalk L/R: -96 dB

Mic Input (max gain)
Full Scale Level: -32 dBu
Dynamic Range: 90 dB
THD+N: 0.01 %
Frequency Response:: 20Hz-20kHz +/- 0.4 dB

Mic Input (min gain)
Full Scale Level: -3.4 dBu
Dynamic Range: 102 dB
THD+N: 0.004 %
Frequency Response:: 20Hz-20kHz +/- 0.15 dB

Line Out
Maximum Output Level: +18.0 dB
Dynamic Range: 102 dB
THD+N: 0.003 %
Frequency Response:: 20Hz-20kHz +/- 0.5 dB
Crosstalk L/R: -100 dB

Headphone Out:
Maximum Output Level: 29.4 mW @ 33 Ohm load
Dynamic Range: 102 dB
THD+N: 0.007 %
Frequency Response:: 20Hz-20kHz +/- 0.35 dB
Crosstalk L/R: -60 dB

Dimensions: 322 x 301 x 51 mm / 12.68'' x 11.85'' x 2.01''

Weight: 2.50 kg / 5.51 lbs

Notes: Outstanding DJ turntable, designed to bridge the gap between vinyl and Serato. Solid analogue turntable underneath, embellished with digital features like pads, performance modes and an LCD screen for track info.

Supplier's notes:
This turntable is designed for a seamless integration with Serato DJ Pro, offering the possibility of controlling up to 7 different performance modes via the pad section. And thanks to the unique Platter Play mode, the pads can be used to control the platter's rotation speed to create melodies and authentic musical performances. The RP-8000 MK2 represents the perfect balance of a first-class professional turntable and an innovative musical instrument.

Real Time LC Display:
Besides all creative improvements, the RP-8000 MK2 has everything a DJ turntable should be equipped with. A digital LC display shows information regarding pitch, BPM, deck assignment, scales and notes, elapsed/remaining time of current track, as well as firmware settings. In Serato DJ Pro, it is possible, for example, to show the current BPM value of a track, in order to exactly match your tracks without the need to look at your computer monitor.

Pad section with 7 New Performance Modes:
Developed for application with Serato DJ Pro, and thanks to the seamless plug-and-play integration, the RP-8000 MK2 in a DVS setup offers unparalleled creative possibilities. The 8 large pads with RGB illumination can control over 7 different performance modes (Cue, Sampler, Saved Loops, Pitch Play, Loop, Loop Roll, Slicer), as well as 2 user modes, which can be custom assigned with individual preferred functions. Furthermore, by using the multi encoder it is possible to browse tracks directly from the turntable unit itself, and load them instantly to the respective deck. Thanks to its MIDI compatibility, the RP-8000 MK2 can communicate with every MIDI compatible DJ software - this way, an additional controller for performance modes is not necessary.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:
The RP-8000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Platter Play - Creative Platter Pitch Control:
Platter Play mode allows users to control the platter's pitch via the performance pads, opening up new possibilities for musical live performances and turning the RP-8000 MK2 into a legitimate musical instrument. A total of 22 scales and 34 notes are at your disposal with an option to create up to 9 user-defined scales. The two speed select buttons can be used for pitch bending in Platter Play mode and also to respectively increase or decrease the audio material's pitch in steps of one half-tone. Furthermore, the platter's speed can also be controlled via an external MIDI keyboard.

High-Resolution Pitch Section with Digital Fader:
By using the high-resolution pitch fader, you can adjust the platter speed in the classic turntable pitch range +/-8%. The RP-8000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch, allowing for increased creativity when manipulating and mixing records. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

Powerful Motor with Extensive Adjustment Possibilities:
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes the RP-8000 MK2 an extremely smooth running turntable. Also, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration-reducing rubber to eliminate unwanted vibrations and resonance.

Sturdy Casing Construction:
By using a combination of metal, rubber and synthetic materials, the RP-8000 MK2's housing is more reinforced and heavier than ever before. This results in a turntable that is extremely resistant to vibrations caused by heavy bass sounds, and its shock-absorbing feet help to further improve this isolation. The surface is coated with a scratch-resistant high-quality deep black metallic finish.

High-Quality Connections and Integrated Phono Pre-Amp:
Thanks to the recessed rear connection panel, the RP-8000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. Due to the additional output, the turntable can be connected to 2 mixers simultaneously, also allowing an easy switch from DVS to vinyl. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Notes: A typically weird and wonderful approach to sequencing from Soma Labs with this 'organismic sequencer', which generates Eurorack-friendly CV and gate signals based on 'dynamic equilibrium'.

Supplier's Notes:
ORNAMENT-8 is an organismic sequencer, or in a broader sense, a synthesizer of behaviour. A unique feature of ORNAMENT is its fully horizontal modular structure that consists of eight equal and independent cells which are special delay lines. It's in fact an analog computer with a temporal dimension, the behaviour of which is determined by patching and adjusting the temporal properties of each cell involved in the generation of the behaviour.

ORNAMENT can be controlled via Eurorack-compatible Control Voltage. The output of ORNAMENT is also standard CV signals that can control LYRA-8, PULSAR-23, Eurorack systems and any equipment that can receive CV, including non-audio ones such as lighting setups or electromechanical installations. For controlling LYRA-8 we developed a special adapter for easy connection to the LYRA sensors while also preserving the ability to play it normally with your fingers.

The adapter attaches to LYRA's surface using magnets which make installation easy and safe. ORNAMENT, as an organismic sequencer, complements LYRA's organismic synthesis nature, making them a perfect pair.

ORNAMENT-8 is based on a completely new principle of synthesis of behaviour. Instead of a vertical structure with a tempo generator on top and some memory for storing sequenced events, Soma Laboratory have have a dynamic equilibrium inside a horizontal structure without any memory, just an infinite "now" that generates the next moment of behaviour. In certain key aspects, it resembles a neural network where there is no difference between "processor" and "memory", where functions are blurred and all structures are very flexible. Because the ORNAMENT is fully modular, you can connect any number of ORNAMENTs into a single network, creating very complex multi-dimensional structures with the same complex behaviour. For those with philosophical inclinations, ORNAMENT is a playground the size of a box of chocolates where you can study fundamental laws of life and society, going beyond linear logical thinking.

ORNAMENT-8 was designed by Vadim Minkin, the new creative mind who recently joined SOMA laboratory. ORNAMENT is intended to be the first in a line of SOMA sequencers developing new principles of behaviour generation and control.

SPECIFICATIONS:

Number of cells: 8
Number of pulse converters: 4
Number of 3.5 mm mini-jack Eurorack adapters: 8
Number of contacts (inputs and outputs): 78
Input and output voltage range : 0-10 volts
Minimum cell delay time: 50 ms
Maximum cell delay time: 50 seconds
Maximum cell delay time at> Cv = 0 volts 5 minutes
Supply voltage: 12 volt center-plus
Current Consumption: 10-50 ma
Dimensions: 266 x 255 x 54 mm
Weight: 1.4 kg

As with any analog device, there may be a small variance in actual values.

Included:
ORNAMENT-8 i 1 pc.
Power supply 12v 1a i 1 pc.
Male-male power cord i 1 pc.
65 cm cable with alligator clips i 12 pcs.
30 cm cable with alligator clips i 14 pcs.

Notes: Typically experimental stuff from Soma, the Enner is a five-voice synth with an array of filters, electro-acoustic noise options, analogue effects and huge creative potential.

Supplier's Notes:
ENNER is a very expressive sound tool that can generate bits, pads, FX, noises, clicks, glitches, but also function as a cool vocal mic with built-in analogue FX and much more! A musician with a rich imagination and who's experienced in playing ENNER can perform an entire exciting gig using just this synth.

As an instrument, ENNER is a unique analogue synthesizer with the key principle being that all signals that make sound pass through and are managed by your body. Your hands become the central part of the circuitry. Touching different contact pads with different parts of your fingers and palms with different amounts of pressure, letting signals pass through your body defines the mixing, volume, timbre, feedback and other parameters of synthesis. Human skin has much more complex electric properties than we think. The skin provides not just resistance but also some capacitive properties and even nonlinear dependence of conductivity from current, its direction and time during which the current was applied. All of this affects the sound, making you the key part of the synthesis process.

All pots of ENNER are metallic and also function as inputs or outputs. Touching a pot can change not only the parameters but also patch the audio signals.

ENNER consists of:

The array of filters with fixed frequency properties (the triangle in the centre): the stereo high pass filter (HPF), the stereo bandpass filter (high mid - BPFH), the stereo bandpass filter (low mid - BPFL), the stereo lowpass filter (LPF). Stereo means that the filters have separate inputs for left and right channels as well as separate outputs. Sliding on the filters' pads with your fingers you can create a rich stereo image where each channel may have not only individual volume properties but also timbral ones. The outputs of the filters are mixed together and connected to the main output. Also in the triangle, you have a stereo direct input (DIR) that lets you bypass the filters.

The modulated stereo delay. The input of the delay is the two pads on the top of the triangle (DLY blue). The output of the delay is mixed with filter output and connected to the main output. Also, you have delay output connected to the pads placed on the left and right sides from the top of the triangle (DLY orange) that lets you create feedback and other interesting effects. The delay has two separate lines (left and right) with individual TIME controls (BPEMR pots), common FEEDBACK and the common pot that defines the amount of self-modulation (BIZZARE). The BPEMR pots are also touch inputs for delay time modulation.

On the right side of ENNER, there is a five-voice synthesizer with individual adjustment of frequency for each voice (TUNE knobs) with the possibility to change the pitch of all voices simultaneously (PITCH knob). TUNE knobs are also the outputs of the voices, so by touching them you can patch the voices to the filter's inputs. The synthesizer has separate output pads for each voice (pads OUT 1-5), individual modulation inputs (MOD 1-5) and ring modulation outputs (the RING 12, 23, 34 numbers indicate which voices are sources for the ring modulation). Connecting MOD and OUT pads of one voice with your fingers will pitch it up. The fifth voice has an additional modulation pad MOD 5- which can shift the pitch of the fifth voice down (connect it to +12 pad or any pad that has some positive signal including the output of the fifth voice).

On the left side of ENNER, there is the second synth that has one master generator, the output of which is divided six times by two with individual outputs for each stage of division (PULSE 1-6). This synth is aimed at creating rhythmical clicks, basses and octave tones. The frequency of the master generator is defined by the TEMPO knob. The output pads &1,2,3 are logical multiplications of different PULSE outputs giving additional and more complex rhythm combinations.

ENNER is also an electro-acoustic noise instrument. It has a piezo pickup attached to the front panel that captures sound from the casing itself. There is metallic spring and you can attach rubber bands to the panel to create various acoustic sounds. The piezo mic can capture clicks and scratches you make with your fingers, and it also allows you to create filtered feedback. Not only that, it can even capture your voice singing over the panel! To get sound from the piezo you have to connect the PIEZO OUT pad with some filters or delay inputs. Applying filters and delay on the piezo out while the panel works as a mic, catching the audio signal from the speakers connected to the ENNER output lets you create very cool acoustic feedback-based effects. PIEZO GAIN adjusts the piezo sensitivity.

The bottom of the triangle (NOISE pad) is the output of static pink noise.

External in (EXT socket and EXT pad) lets you send an external audio signal to ENNER and process it through the array of filters, delay and other ENNER stuff.

All of these features make ENNER a simple yet powerful kit of sound sources and FX that give you a rich and diverse sound palette with many possible playing techniques that you can change very fast as there is no other control over the sound other than your touches.

Specs

Array of filters

Pads DIR - direct input (no filters)
Pads HPF - highpass filter in
Pads BPFH - bandpass filter high mid in
Pads BPFL - bandpass filter low mid in
Pads LPF - lowpass filter in
(L - left channel, R - right channel)

Pink noise generator

NOISE - noise output

Delay

Pads DLY(blue) - delay in
Pads DLY(orange) - delay out
(L - left channel, R - right channel)
Pots BPEMR - delay time (L and R) also time modulation inputs
The UROBOROS pot - feedback (both channels)
Pot BIZZARE - delay self-modulation

Piezo

Pad PIEZO OUT - the output
Pot PIEZO GAIN - piezo amplification (also piezo output)

The five-voice synth

Pads OUT 1-5 - outputs of the voices
Pads MOD 1-5 - modulation inputs of the voices (try to connect them with OUT)
Pads RING 12, 23, 34 - outputs of ring modulators that multiply outputs of different voices
Pad MOD 5- - an additional modulation input for the fifth voice (try to connect it with +12)
Pots TUNE 1-5 - frequency of the voices (also voices outputs)
Pot PITCH - transposing all voices at once.

Rhythm\Bass synth

Pads PULSE 1-6 - output of binary dividers
Pads &1, 2, 3 - additional outputs that are logical AND of different PULSE outputs.
Pot TEMPO - the frequency of the source generator

External

Socket EXT - external in
Pad EXT - connected to EXT socket tip

Power

+12V center + 0.2A. ENNER requires a good stabilized and filtered PSU. We recommend contemporary switching mode PSUs with a wide input range. The PSU is included.

Grounding

In order that when playing on ENNER there would be no hum from the electricity grid interferences, the device must be properly grounded! A normal grounding connection at the electric socket, which is carried through the power cord to your audio equipment to which the ENNER is connected, is sufficient.

What's in the kit:

ENNER
12V center plus PSU
Several rubber bands

Notes: THE PIPE is a voice / breath / mouth-controlled dynamic FX processor and synthesiser.

It turns your voice into a powerful FX / beat / lead / soundscape synthesizer and it offers unprecedented levels of vocal processing, truly expanding the traditional boundaries of singing. Conventional singing with lyrics is also possible, and you can use the FX to add live modulations to your vocal performance.

Also, you can use the PIPE as a powerful FX processor for an external signal as a synth, drum machine etc.

THE PIPE has 12 different algorithms: ORPHEUS, FILTERRA, SYNTH, REVERB, MADELAY, PULSE, BASSDRUM (three versions), OCTAVA, GENERATOR, HARCHO!

The PIPE consists of the handheld part and a small break-out box with L R output jacks (1/4-inch) and DC IN for power. The handheld part and break-out box are connected by a single cable that contains both output channels and DC power.

The handheld part consists of the contact vocal mic (connected by a standard 1/4-inch jack), electronic components and the controls. You can easily attach a cable extension to the mic which opens up many more options. Attach it to a stand, or put it inside of or on the surface of acoustic instruments such as drums, guitars, trumpets etc. Also, you can use the mic in jack as external in and use the PIPE to process any signals you want.

Notes: You're making tomorrow's music... so why settle for yesterday's interface? AudioFuse is the revolutionary pro audio interface that sets a new standard in sonic quality, creative production and value. It fuses the superior sound of high-end analog studio consoles with the flexibility of a solid mobile interface- with all the connectivity you need for any recording or performance.

Whatever sound you need to capture, from the most delicate ambience to the heaviest cacophony, AudioFuse will reveal the beauty in everything.

Pro studio quality was the mantra right from the start with AudioFuse. Now you can transform your desktop, hotel room, concert- whatever, wherever- into a studio with world-class sound.

No compromises, each element of the AudioFuse has been selected to perfectly serve your sound, such as the two proprietary DiscretePROr microphone preamplifiers and the set of top-notch AD/DA converters.

Saving the purity of your sound and the passion it conveys is what AudioFuse is all about.

When creating and recording, you need an interface that lets you focus on the task at hand and keep distractions to a minimum.

With AudioFuse, we didn't want to settle for merely bringing you the sound quality of a pro studio, we wanted to bring you its workflow too. That's why you have detailed metering, talkback for instant communication with talent in the next room, inserts to add professional effects processing to your recording chain, A/B monitor switching, and direct access to the essential features so you can spend more time creating and less time setting up.

Wherever it comes from, whatever it has to travel through, and wherever it needs to go, AudioFuse will guide your sound.

AudioFuse connects with virtually everything: mics, instruments, turntables, studio equipment, Mac, PC, tablets, even iOS and Android phones. It all happens with a round-trip latency as low as 3 milliseconds so you'll feel right in the groove every time.

When you know your equipment is the best of the best, creativity can take care of itself.

When it is all about giving the best of yourself being able to rely on the best technologies becomes crucial. The lowest harmonic distortion, the most linear frequency response, the highest signal-to-noise ratio and the shortest latency, these technical terms may seem far removed from your creative process, but they are essential to delivering your music in the highest quality possible.

Capture the moment- at home, in the studio, on the road, or wherever creativity strikes.

AudioFuse has a super-solid aluminum chassis you can trust, complete with a hard cover to protect it from damage in your bag- or even just dust on your desktop. The build quality goes far beyond a great-looking exterior, as well. Your unit has to pass rigorous testing before it can be packed and shipped. It even comes with a test specification printout of your exact unit. Meet your new best friend for the studio and stage.

Notes: The Allen & Heath ZED-24 has an incredibly advanced feature. It has 23 independent sources to the mix, 10 independent outputs and 4 aux sends. Configurable USB audio input/output makes it easy to capture stereo recordings, playback and effects, a unique dual stereo input capability and some very advanced monitoring facilities. In fact, the ZED-24 mixer is so packed full of great features that you'd think it would cost much, much more.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on the ZED-24 is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED-24, select the USB routing on the mixer and the device on your computer and that's it.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

Send options:
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

Return options:
1) To Stereo 3 channel

ZED-24 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, ZED-24 has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

Notes: Serious mastering-grade kit. Stereo interface with high-end converters and headphone amp circuit for pristine sound quality. Proper clarity for critical listening.

*** Complimentary warranty on this product for 5 years if purchased from Juno- UK warranty only***

Supplier's notes:
The RME ADI-2 Pro FS is a two channel 24-bit / 768kHz AD/DA converter and USB 2 Digital Audio Converter, audio interface and high-end headphone amp with new jitter rejection SteadyClock FS technology.

The RME ADI-2 Pro FS is the most flexible converter available with balanced and unbalanced I/O, two headphone outputs, DSP-based signal processing and RME's latest Steady Clock FS jitter rejection technology. It offers Class Compliant USB compatibility, sample rates up to 768kHz as well as DSD record and Direct DSD playback.

It boasts a raft of analogue and digital I/O, including two servo-balanced analogue XLR/TRS Jack inputs, two separate balanced and unbalanced outputs on XLR and TS as well as two headphone outputs. Digital I/O include optical ADAT, Optical and coaxial SPDIF and AES accessible via a breakout cable.

Furthermore, its Class Compliant UAC 2 USB 2.0 port offers iOS compatibility and is necessary for firmware updates. It can also work as a 6-in / 8-out audio on Mac OSX and Windows via WDM and ASIO.

Using the latest in A-to-D technology the ADI-2 Pro FS offers best possible sound with highest signal-to-noise ratio, super low THD and noise. It supports sample rates up to 786kHz PCM and DSD recording in dual mono design, with 3dB improved signal to noise ratio. Two digital-to-analogue converters are used for the separate stereo outputs. The latest Integrated Sample Rate converter takes care of clocking issues between S/PDIF and AES thanks to RME's latest SteadyClock FS technology.

A high-resolution display shows controls for the ADI-2 Pro FS unique features including DSP effects like 5-band parametric EQ, binaural crossfeed, adjustable loudness filter, selectable AD/DA filters and four analogue reference levels. Furthermore, M/S processing is provided with stereo width control as well as phase loop. The display also shows RME's famous Spectral Analyser and 30-band bi-quad filtered analysis tool.

Notes: Big version of A&H's entry-level Zed series mixer. Originally intended for live applications but works very well as a studio mixer for hardware setups. A lot of mixer for your money.

Supplier's notes:
The Allen & Heath ZED-22FX mixer is ideal for groups who need to travel light. Featuring configurable USB audio input/output makes it easy to capture stereo recordings.

The ZED-22FX easily accommodates vocals, drums, guitar, bass and keys whilst also providing a dedicated FX bus and 16 internal time-delay effects, giving the whole mix extra ambience.

The ZED-22FX has an essential selection of 16 time-delay effects, designed for small groups who don't want to carry around an effects unit with their gear but who still want great quality FX at their gigs and on their recordings. Our DSP engineers worked hard, crafting and refining beautiful reverb algorithms to enhance every performance. These effects are available nowhere else at this price point, this quality and integration is only available from the ZED-FX. ZED effects are easily controlled using 3 buttons with 9 display LEDs. For example, the ideal delay time can be quickly tapped-in, or the perfect amount of reverb on the lead vocal can be dialled-in. There is one-stop navigation and editing - in fact, it's just as easy as using effects pedals. To alter effects parameters, the TAP button is held down and the up/down buttons pressed to adjust the specific parameter for that effect, for example, the decay length on PLATE, or the depth on CHORUS.

Based on the proven pre-amps from the hugely successful PA series, ZED-22FX has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

Notes: 24-channel flagship version of Korg's hybrid mixer, combining analogue and digital features designed by mixer royalty Greg Mackie and Peter Watts. Supremely flexible with great sound.

Supplier notes:
A mixer should not only sound good. It should be very easy to use.

Korg has collaborated with the legendary mixer design team of Greg Mackie and Peter Watts to create hybrid/analog mixing consoles that make creative mixing easy. Both the 24- and 16-channel models give you instant analog control for live mixing with stunning sound quality and more musician-friendly features than the competition - paired with the power of high-quality digital where it counts.

Use a SoundLink and you discover all the typical Greg Mackie features that are unique to SoundLInk; hear your first live mix and discover why Peter Watts helped design legendary Trident consoles and then hundreds of high-end studio processors and preamps. Besides designing mixers, Greg Mackie has been mixing on them for over 40 years.

When you listen to the "White Album", Rhianna's "Rated R" and "Loud", "Goodbye Yellow Brick Road" and literally hundreds of other familiar albums, you're listening to the legendary Trident mixing console sound. Peter Watts had an important role in Trident technology; he brings the same rich, warm preamp, EQ and dynamics quality to the products he designs today. HiVolt mic preamps give you the most headroom of any comparably-priced analog or digital mixer (16.5V internal voltage, even on stereo channels where other mixers skimp). They sound warm and musical.

It is the only small mixer that has Mute Groups. They let you instantly call up different combinations of channels for various groups on stage, different songs, sound checks, a solo acoustic number, a drum solo or different parts of a church service (choir, praise band, pastor. You get four Group options, each easily programmable and recallable.

Some musicians want to hear more of their own instrument or voice in their in-ear or floor monitor, a process that is complicated to change on other mixers. SoundLink's Musician's Phone feature provides one-knob boost of the complete left/right mix into the musician's individual track. Instead of having to change main mix settings or take up a bus, you have dedicated knobs for two musician's "more me" monitor mixes.

Instead of a generic digital effects processor chip, SoundLink mixers use a high-quality proprietary Korg custom chip that builds on all of Korg's multi-decade expertise: twenty four ultra-realistic digital effects. For example, all six reverb effects include an alternate "WARM" version - a touch veteran Korg users will tell you is very useful. Parameters of all effects can be tweaked, saved and recalled, and activated by an optional footswitch. Plus, you get test tone generators for use with the built-in 24-band Spectrum Analyzer that's another SoundLink exclusive in a mixer in this price range.

Digital processing and effects are frustrating if they're buried in some long, scrolling menu inside a menu. For EQ and other control features, and a row of individual L/R, AUX 1 and Aux 2 assign buttons for both Equalization and Dynamics makes mixing easier. SoundLink's Limiter, Compressor, Noise Gate are both effective without being harsh or exaggerated. Each has tweakable, recallable parameters. Coupled with a 31-band Spectrum Analyzer, our super-practical 31-band/9-band ParaGraphic EQ solves acoustical problems other small mixers can't handle.

Notes: Desktop version of the mega Hydrasynth. The same amazing synth engine, paired with polyphonic, pressure-sensitive touchpads, making it an interesting creative alternative to the keyboard version.

*** New 2.0 Firmware update for all Hydrasynth models - March 2023 ***

This is a free of charge update for all current and new users of Hydrasynth. The biggest news in this update includes:
Expanded memory to 8 banks (Keyboard, Desktop, and Explorer only)
NEW modulation source: VOICE MODULATOR
OSC Bit reducer
LFO quantizer
ENV quantizer
LFO Step Advance
Global FX bypass
Increased Vibrato resolution
New Sustain pedal options including Sostenuto
More LED options
Glissando in glide options
Arp Range goes to 6 octaves
Arp Step Offset parameter
More Rand/Init shortcuts (all STEP LFO steps, Wavescan waves, Voice mod offsets)
Local On/Off saved
......And more!
This is the first major update to the Hydrasynth family in a little, which adds a tonne of new features.


Supplier's notes:
The HYDRASYNTH Desktop / Rack has the same great sound engine as the HYDRASYNTH Keyboard. The sound engine is a sound designers dream synth as well as a performing musicians ideal. The sound engine is designed for maximum flexibility. At the same time, we designed the user interface in a way to allow you to edit the patch quickly with a minimal amount of paging and many workflow shortcuts.

Utilizing an advanced wavetable synthesis engine, 3 Oscillators, dual Wave Mutators and 2 filters that can be configured in series or parallel, the tone generating capabilities are unmatched.

As for the performance capabilities, The Hydrasynth Desktop / Rack has 24 polyphonic pressure touch pads so that you can play the unit without needing to connect a keyboard or other controller. Using multiple pad layout modes as well as quick to access scale modes, the Hydrasynth Desktop / Rack is easy to make music on.

The Hydrasynth Desktop / Rack comes with rack ears so that you can mount it in a standard 19" rack.

Notes: The NTG5 is a short, ultra-lightweight shotgun microphone ideal for use in the most demanding recording applications. Featuring a revolutionary acoustic design with circular ports replacing the linear slots found in other shotgun mics, it offers unmatched transparency and a more natural, uncoloured sound. Combined with a tightly controlled frequency response, smooth off-axis response, and very low self-noise (just 10dBA), the NTG5 sounds spectacular in a wide variety of applications, particularly location recording and demanding filmmaking scenarios where superlative audio is the imperative. No excuses.

The NTG5 is a boom operator's dream, weighing a mere 76g and measuring just over 20cm, making it ideal for use on long, demanding shoots. It also features RF-bias circuitry to ensure reliable performance in adverse environments, with excellent resistance to high humidity, severe cold, damp, and dust. The perfect location recording mic.

Revolutionary Acoustic Design:

The NTG5's body design has been completely overhauled, with circular acoustic ports replacing the linear slots found in other shotgun mics. The revolutionary design - the result of many months of specialised testing - delivers unmatched acoustic transparency, and a natural, uncoloured sound that will sound superb in a wide variety of applications.

A Boom Operator's Dream:

The NTG5 features a short, super-lightweight aluminium body (just 76g!), making it one of the most compact professional shotgun mics out there - a dream for boom operators who find themselves on long shoots, or filmmakers and sound recordists looking for a more portable and lightweight rig that delivers broadcast-grade audio.

The Perfect Location Recording Mic:

With a tightly controlled frequency response, low self-noise, highly directional supercardioid polar pattern, and smooth off-axis response, the NTG5 sounds spectacular in a wide variety of applications, while RF-bias technology and conformal coating ensure superior performance in harsh environmental conditions. It's the perfect mic for location recording and demanding filmmaking scenarios where superlative audio is imperative. No excuses.

Includes:

1 x NTG5 Microphone
1 x PG2-R Grip
1 x WS10 Windshield
1 x ZP1 Small Pouch Bag
1 x RM5 Microphone Clip
1 x PG2-R Pro Cable
1 x Foam Windshield

Notes: Analogue mixer, audio interface, effects and stereo digital recorder all in one box. Clever, versatile idea that makes a cost-effective entry point for various types of recording.

Supplier's notes:
Don't let the classic analogue mixer design fool you - the StudioLive ARc-series mixers were built to record. With a pristine analogue front-end, high-gain XMAX-L mic preamps, and a 24-bit, 96 kHz, USB-C compatible USB 2.0 audio interface, its hybrid design makes it simple to record studio productions and mix live shows from a single intuitive console. Add in a musical 3-band analogue EQ, mic/line boost for low-level vintage synths and broadcast microphones, all-new digital effects with rich reverbs and lush delays, Bluetooth connectivity, and a stereo SD recorder... and you have a mixing and recording powerhouse that fulfils the needs of both modern musicians and content creators.

A full-featured audio interface:

The StudioLive AR16c audio interface operates at up to 96 kHz for high-definition mixing and recording. Record each of the 16 inputs, plus the main mix for even more flexible recording options. Play back up to four streams for monitoring previously recorded tracks - plus a click. Twelve lauded XMAX mic preamps provide all the gain you need to capture even the most subtle details without adding any extra noise. The analogue mixer front-end makes connecting your gear to your computer intuitive, and creating monitor mixes is quick and easy. With a USB-C compatible connection, your StudioLive AR16c is ready to use as an audio interface for nearly any computer.

The channel that does it all - even Bluetooth connectivity:

The unique Super Channel can handle four stereo sources at once and makes it easy to integrate consumer devices into your studio workflow. Connect a turntable to the RCA inputs, use the 1/8-inch stereo input to plug-in your smartphone, or forget the cable and connect it via Bluetooth wireless technology. You can also toggle between a stereo playback stream from your computer and playback from the onboard SD recorder, making rehearsal a snap.

A complete recording solution for studio and stage:

The StudioLive AR16c audio interface and analogue mixer is tightly integrated with state-of-the-art recording software to help you realize your creative vision. Record multitrack live performances with one click thanks to PreSonus' Capture live-recording software. Create complete studio productions with our award-winning Studio One Artist DAW. With two professional recording applications included with your StudioLive AR16c, you're ready to record right out of the box.

Stereo recording without a computer:

Imagine you're rehearsing with your band and want to record your session to analyse later. Or perhaps you're in the middle of a songwriting session and want to capture your ideas as quickly as they come to you. Either way, the StudioLive AR16c's stereo SD recorder has you covered. Insert any SD/SDHC card and you're ready to record your main mix to listen to later, so you'll never forget a great song idea or an amazing guitar solo. Doing mobile interviews for your podcast? Leave the computer at home and record straight to SD.

Effects without latency:

Monitoring with reverb and delay helps to create better recordings. Any vocalist or guitarist will tell you that a little reverb makes them feel more comfortable while performing. The StudioLive AR16c mixer's onboard effects processor lets you add high-quality reverb, delay, or chorus to any channel for a professional monitor mix. Like what you hear in your headphones? Record the Main Mix and capture the effects mix, too - with or without the dry channels - to blend with your multitrack recording. Experiment in post-production to your heart's content.

All the connections you need with a familiar look:

Packed with all the connections and controls needed to mix and record in the studio and on the stage, the StudioLive AR16c is the ultimate recording solution. The eight mono channels and four stereo channels include a musical three-band EQ, plus one of PreSonus' famed XMAX high-gain mic preamps. Two dedicated monitor mixes with balanced outputs provide your musicians the custom mix they need. The USB-C compatible connector ensures your StudioLive AR16c audio interface will be the centre of your studio for years to come. And with high-resolution 96 kHz recording, a full complement of connections, and an instantly familiar workflow, the StudioLive AR16c is the perfect recording and mixing solution for the modern musician and content creator.

Notes: The ultimate Eurorack case.

At home, stage or into the studio, the Befaco 7U Case brings your system to the next level.

Power to the people

Equipped with Befaco's latest and most sophisticated power supply (Trolley Bus), the Befaco 7U Case supplies up to 5000mA of power. Ready to feed the most modern and power-hungry modules.

Connected to the world

The Befaco 7U Case rear panel count with a vast array of connections to pair your system with external devices. Each connector follows the Intellijel format, making them fully compatible with Intellijel's 1U modules.

Build to last

Designed with a high-quality Unibody Black Anodised Aluminum frame, the Befaco 7U Case is a slim and sturdy solution to travel with. The included PET-G clear cover keeps your modules safe even patched.

Designed to fit any situation, the Befaco 7U Case metal frame is a lightweight and strong device by itself. With a maximum depth of 53mm (power supply side) and 70mm (rest of the case), it can house the vast majority of modules out there. Equipped with a high-quality anti-vandalic power button and a Kensington lock connector, the Befaco 7U Case is also a safe device to travel with.

Because power is important for us, this new Trolley Bus systems drop up to 5000mA on the +12V rail, 2500mA on -12V, and 4000mA on +5V with high voltage stability under load and low noise. The case drives up to 36 modules over its 208HP (3U) and 104HP (1U) rows (Intellijel format).

6x 6,3" Jacks I/Os with Balanced and Unbalanced configuration, MIDI In/Out/Thru ports, USB Device Type B, and Apple compatible USB-A charging ports. The Befaco 7U Case offers a huge amount of connections fully accessible from its internal I/O Board.

Created with compatibility in mind, the rear panel ports are fully compatible with Intellijel 1U modules. The 1U row can be easily customized to be at the centre of the case with just two screws.

To keep your modules safe and dust free, a custom PET-G clear cover is included with the case. The cover has been designed to close patched, and a custom velcro belt is included to keep it safely closed.

To save space in your studio desk, the Befaco 7U Case is also Vesa mount fully compatible. It counts with Vesa threads at the bottom to easily attach it to desktop or wall Vesa stands.

Technical Specifications

External Dimensions (without cover): 53.5cms x 31cms x 8cms
External Dimensions (with cover): 53.5cms x 31cms x 14cms
Internal Row Dimensions: 2x 3U 104HP and 1x 1U 104HP (Intellijel format)
Power supply Specifications: +12V: 5000mA, -12V: 2500mA, 5V: 4000mA
Module Depth: 53mm (power supply side), 70mm (rest of the case)
Module Slots: 36
Weight (without cover): 2.6kg
Weight (with cover): 3.4kg
Rear connectors: 6x 6'3" Jack I/O (Balanced or Unbalanced), MIDI DIN In/Out/Thru, USB Device Type B, Apple compatible USB-A charging ports.
Power brick: 120W 2.5mm Barrel connector centre positive (included)
Cover: PET-G Clear cover (included)
Finish: Black Anodised Aluminum
Vesa 100 format threads. Recommended Vesa stand: >12kg
Kensington Lock

Notes: Designed to integrate sound sources from outside Eurorack, Verbos's Real World Interface offers three channels including built-in microphones, preamps, envelope followers and a frequency detector.

Supplier's Notes:
The Real World Interface is a 3-channel external processing module intended for connecting with sound sources outside the system. The channels are oriented as vertical channel strips. The left and right channels have a built-in condenser microphone, preamp, envelope follower with variable decay and gate extractor. In addition to a preamp, envelope follower and gate extractor, the centre channel also has an Automatic Gain Control (fixed high ratio compressor), fundamental extractor (tracking lowpass filter), frequency detector and locked oscillator. Internal microphones are useful for introducing electro acoustic room sounds into the modular. Envelope followers can be used to have external signal levels effect parameters such as filter cutoff or level for building dynamics processors. Gate extraction allows external sounds such as metronomes, clicks, claps or room sounds to advance sequencers, trigger sounds or initiate other events. The Frequency Detector can extract the pitch of simple monophonic sounds but is also a semi chaotic CV source in the tradition of such modules since their introduction in the 1960's. The Locked Oscillator plays a sine wave at the same pitch as the input signal.

Size: 18HP