ダンスミュージック検索結果

Notes: The Pedal I/O JACKS 1U Module allows you to patch standard 1/4? TS cables to and from your guitar/instrument pedals.

This module only works when connected to a Pedal I/O 1U module via ribbon cable.

Notes: Att 1U Passive Variable Signal Attenuator

This passive attenuator has a 100K linear potentiometer that is DC coupled. Perfect for adding attenuators to those 1U/3U modules without.

Width: 6HP
Depth: 18mm

Notes: SBSTRT features 256 recordings of raw, natural earth sounds, all of which were created by manipulating numerous materials such as metal, stone, ice, earth, plastic, wood, vegetables, fruit and liquid to name just a few. Everyday sounds you may hear in a construction site, warehouse, traffic, crowd, factory, subway, garden, park, office or forest have been identified, performed and captured for integrating into the modular synth. These raw & unprocessed sounds were carefully edited to highlight their percussive qualities, making them an ideal counterpart to the electronic modular sound palette.

All samples on the card are available for playback at 48k, 64k and 96k for maximum versatility in pitch control while maintaining latencies of as low as 0.25 ms.

Design by: Glitchmachines
Type: One Shot
Character: Percussive, Texture

Only compatible with the Tiptop Audio One Digital Audio Flux Eurorack Module.

Notes: ***B-STOCK: Without original box, product in perfect working order***


Gate Expander for Sweet Sixteen mkII.

This is an expander, brings 8 gate inputs for the Sweet Sixteen mkII.

The panel is reversible, so jacks & buttons can be in the left or right side.

The orientation of the 10 pin ribbon cable is marked by the 'do not plug power here!' legend on the PCB, so it could be with the red stripe facing that in both GESS and Sweet Sixteen mkII modules.

Notes: PERC features 256 percussion sounds with tight attacks and a bright harmonic spectrum. This collection is specifically focused on shorter percussive samples and includes material such as multi-layer drum & percussion hits, chopped & processed loops, synthesized FM strikes, mallet and bell tones, sampled drum machines, various toms and hand drums, obscure noise boxes, sampled old-school game chips and much more. PERC makes full use of ONE's snappy character.

All samples on the card are available for playback at 48k, 64k and 96k for maximum versatility in pitch control while maintaining latencies of as low as 0.25 ms.

Design by: Glitchmachines
Type: One Shot
Character: Percussive

Only compatible with the Tiptop Audio One Digital Audio Flux Eurorack Module.

Notes: Each of the three USB-A sockets on the USBPOWER module can be used to charge your mobile phone, connect a USB lamp or supply power to any other USB device. Furthermore, the output socket provides +5V and ground to supply e.g. DIY circuits on a breadboard.

Please note: This is only a power source via USB sockets; no USB data communication is possible here.

Includes additional USB lamp!

Notes: V Haus features 256 Deep House chords formed, structured and shaped from a variety of classic and modern day synths by Voltage Disciples chief sound designer Richard Somerville. The chord structures have been especially chosen to provide the configurations often used in Deep House and provide a starting point or stepping off point for complex chords in the modular environment. Some samples have subtle delays and reverbs which add characteristics often found in Deep House whilst others remain dry to allow the user further experimentation with modular delay's, reverbs and FX etc. With ONE's tape-like pitch control these chords turn into beautiful pads and bass material inside the modular.

Notes: The MIXCONSOLE JACKOUT is an extension for the MIXCONSOLE with 1/4" (6.5mm) jack sockets for master left/right output and for the FX send and returns - all via mono sockets (unbalanced). This avoids the need for separate adapter cables.

The module is connected via a small internal connection cable to the right of the MIXCONSOLE or as neighbour of the MIXCONSOLE XLROUT module.

Notes: Dual 1x5 Passive Multiple

Two rows of 1 x 5 Passive Multing

Notes: A passive multiple that fits nicely with the Klavis range.

Notes: This is an expander for Bartender and Barback, enabling CV control of the level of the send bus of up to 8 channels.

Each section of four jacks has a cable to connect to the mixer modules. To get 4 channels to work with Barback you want to connect it to the last Barback in the chain of two. It will then pass along channels 3 & 4 to the next Barback.

Dimensions
2 HP

Current Draw
Module does not draw current

Notes: When patching, you might feel inspired to add an effect mid patch - but how do you audition your new sound compared to the baseline, without a lot of continuous plugging and unplugging? The Bypass offers a solution. Quickly switch between the dry and wet signal output AND immediately hear the impact of your dynamics change, FX or EQ, switching back and forth at will.

The best part? It's a completely passive solution, drawing no power and requiring only an Intellijel 1U row. An invaluable tool for the studio, or the creative performer. The Bypass works similarly to an FX return circuit, taking a signal input and multiplying it to an output. A switch then allows the user to select either the dry input or the returned, wet input, for the final output.

Hand built, tested and guaranteed to take your abuse, the Bypass is the tool you wished you had in your arsenal yesterday - correct that mistake today!

Notes: Test your modules safely without reaching into your case! The TST has two keyed 16-pin headers on the front of the module so you can plug and unplug quickly and easily. Two 16-pin plugs are included to shield the power pins when the module is not in use. It also has LEDs to indicate the power status on each rail.

Please note: Use this module at your own risk. You will be exposing electricity to the front of your modular system. Be careful not to dangle patch-cables, etc. on the exposed pins. This may damage modules and your power supply. Be smart and safe!

Features and Specifications:
Two 16-pin connectors and plugs on the front side of the module
LED indicator for each rail
Module width: 3HP
Module depth: 5mm
Current draw:
+12V: 1mA
-12V: 1mA
+5V: 1mA
Includes keyed power cable, 2.5mm and 3mm screws

Notes: Gate Expander for Sweet Sixteen mkII.

This is an expander, brings 8 gate inputs for the Sweet Sixteen mkII.

The panel is reversible, so jacks & buttons can be in the left or right side.

The orientation of the 10 pin ribbon cable is marked by the 'do not plug power here!' legend on the PCB, so it could be with the red stripe facing that in both GESS and Sweet Sixteen mkII modules.

Notes: The MIXCONSOLE XLROUT module is an extension of the MIXCONSOLE and makes the master outputs available as two balanced XLR sockets.

The module is connected via a small internal connection cable to the right of the MIXCONSOLE or as neighbour of the MIXCONSOLE JACKOUT module.

Notes: The 1U Lil' Buff Mult is a precision buffered multiple in a small package. It fits in both Intellijel and PulpLogic 1U rows.

Features:

1 to 3 precision buffered multiple
Fits both Intellijel and PulpLogic 1U rows
Uses a typical 10-16 pin power cable
Specifications:
Module width: 6HP
Module depth: 25mm

Notes: This module allows you to connect balanced line level audio (+4 dBu) into your Eurorack modular system. It is a compact and easy way to patch in a rack mount/desktop FX units, external line-level instruments like synths and drum machines, outputs from your DAW, or many other line level sources.

Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.

Notes: Dual 4-way passive mult (one audio or cv signal in with multiple unbuffered outputs)

On the back of the pcb is a pair of solder points marked as "link". You can connect these (with a solder blob or small jumper wire) to turn the mult into a single 8 channel Mult instead of 2 x 4 channel.

Notes: Connect two AE cases with RACKLINK!

The RACKLINK is a module for connecting two AE cases; the kit contains of 2 identical modules and a connector cable (length 50 cm). The modules are placed in both cases and are connected by the cable.

By this, you get the following:

The second case is powered by the first one

All bus lines (CV, GATE, CONTROL, MIDI clock/start/stop) are connected to the second case

Additionally, there are 8 connections that can be freely used; so it is not necessary to have connections between two cases. E.g. the second rack can run a patch for a drone sound, the output is then sent via Racklink line 1 to the first rack and here patched to a mixer, via line 2 the second rack can receive a modulation signal from the first one. The lines are bi-directional!

Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.

Notes: Sound goes in, possibilities come out.

Meet Mosaic's line to modular level input converter. With the ability to input stereo audio, and a built-in gain knob to dial in your levels, Input allows you to process your desktop and pro audio gear inside the modular environment.

Tech Specs:
Width: 8HP
Depth: 38mm
Front Panel: Intellijel format, Pulp Logic replacement panels available here.

Notes: 2TONE is a dual bass-treble tone control, that is a quite useful companion for the MIXCONSOLE, to shape the overall spectrum of individual signal paths.

Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.

Notes: Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.

Notes: LinMix is a compact 6HP mixer suitable for audio signals and modulations CVs.

It is not AC coupled.

Tech specs:

-width 6HP
-42mm depth behind the panel, including the power connector
-standard 10 pin euro power (+12V / -12V) (works also at +15V / -15V)
-power consumption +12V 5mA , -12V 5mA

Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.

Notes: WAYOUT8 is a patchbay module for Eurorack systems used to group your DAW inputs and outputs, or manage signals going from one case to another. Wayout8 is grounded, meaning that even if nothing is plugged into the inputs your outputs are still grounded and will not pick up noise. The module is made so it can be mounted two ways, with outputs on the left or right, whichever is the most ergonomic placement in your case. All eight channels are passive so they do not modify your signals and can be used for audio and CV Gate. No power is required.

Notes: WAYOUT8 is a patchbay module for Eurorack systems used to group your DAW inputs and outputs, or manage signals going from one case to another. Wayout8 is grounded, meaning that even if nothing is plugged into the inputs your outputs are still grounded and will not pick up noise. The module is made so it can be mounted two ways, with outputs on the left or right, whichever is the most ergonomic placement in your case. All eight channels are passive so they do not modify your signals and can be used for audio and CV Gate. No power is required.

Size: 6HP
Depth: 10mm
No Power Required

Notes: A dual LFO with different waveforms and triangle-sawtooth blending.
The 2LFO module has two LFO units with different features and generates modulation voltages mostly below the audio range. This module offers

RATE knobs for controlling the frequency
SLOW / FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
SHAPE knob for the first LFO, blends from rising sawtooth to triangle to falling sawtooth
Triangle / Sawtooth switch for the second LFO; changes the waveform of the output
PULSEWIDTH knob for the second LFO, this sets the pulsewidth of the according output
control LEDs for the output waveforms
PWM input for modulation of the squarewave pulsewidth of the second LFO

Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.

Notes: The Man-Machine Interface, or MMI, is a passive touch and pressure sensitive controller which allows the user to direct CV and audio signals at will. The MMI consists of three input/output jacks, and five body contact surfaces in glorious gold.

The zig-zag body contacts correspond to the input/output jacks, with the top zig-zag connecting to the top jack, the middle zig-zag connecting to the middle jack, and the lower zig-zag connecting to the lower jack. The spiral patterns in between the zig-zags are comprised of the two adjacent jacks, so the upper spiral is comprised of the upper and middle jack, while the lower spiral is comprised of the middle and lower jack.

In order to operate the MMI, the user can touch any two points with their fingers, patch cables, a piece of fruit or vegetable, or any other conductive substance or object, in order to complete the connection. The degree of contact made with the MMI, and the resistance of the object completing the circuit, will determine the output that is sent along the circuit. For instance, if a user were to patch a VCO into the top jack, and patch the MMI into a filter in the middle jack, the VCO will be sent to the filter when the topmost zig-zag and lower zig-zag are connected by two fingers, for instance.

But how about the spirals? The spirals offer a way to make a connection with one finger. Using the example from before, the connection will instantly complete when the user touches the upper spiral pattern. Using this principle, it becomes possible to use the MMI in unusual and interesting ways, such as a rudimentary keyboard, a drum controller, a switch and any other number of weird and exciting purposes.

It is also possible to combine several MMI - using two different MMI, it is possible to reach across one zig-zag to another zig-zag, in order to make a different connection, or to place a particularly long vegetable across all the contacts just to see what will happen. The MMI is an unusual patching system for the experimental musician, and lends itself well to all manner of experimentation and weird instruments.

The MMI can bleed a tiny bit of signal when using sharp VCO waves like square waves, while other sounds like sine waves will have softer responses. This can easily be corrected with amplification or attenuation as needed.

The MMI takes up 4HP and is skiff friendly, and is also suitable for installing in external boxes as a passive control unit. You can combine any number of MMI to create increasingly complex keyboard-like arrangements, drum pad matrixes or advanced switch systems.

Dimensions
4 HP
14 mm deep

Notes: With the STOMP-IO module, you can integrate guitar effect pedals and similar devices into your AE modular system! For output (send) and input (return) return there is a mono minijack socket; two minijack to 1/4" socket adapters are included as effect pedals usually work with the latter ones. Send and return levels can be controlled with separate knobs.

Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Enter the Behringer CP35 ATTENUATORS Module. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The CP35 features 4 passive attenuators with linked inputs and 4 separate outputs. Each attenuator knob can be used to adjust the level of the input signal passively from - 8 to unity gain. Connecting a single signal to the first input will allow it to pass to all 4 outputs to have up to 4 variations of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 and 4 leaving input 1 to feed out of output 1. Having multiple inputs allows you to attenuate 4 separate signals and be more flexible with your tone.

Along with the standard outputs, the CP35 also features 6-volt outputs. These outputs give a reference voltage of -6 Volts out of one pair and +6 Volts out the other. Also included are two banks of 4-point multiple circuits for you to be able to route multiple copies of input signals to other modules. The CP35 can be a powerful addition to your synthesizer rig by allowing you to have multiple sources output to multiple modules so you can shape and sculpt sounds that are sure to blow everyone away!

Installing the CP35 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP35 to be mixed with other synth modules for a truly unique set up.

Notes: 1U TRS

Total flexibility for the Befaco 7U or Intellijel cases rear connectors Jacks.
The channels are reversible and can be used independently for Input or Output.
4 Inputs or Outputs (per module) can be obtained by "AND" cables.
Independent tip and ring attenuators are selectable for each channel to convert the Modular Input Level to Line Output Level.

Features

Selectable attenuator per channel
Fully compatible with Intellijel's 7U and Palette cases.
1U Intellijel format.

Specs

Current needs: Passive
Width: 6 HP
Depth: 20 mm (including power connector)
Designed, kits prepared and completed modules assembled in Barcelona

Notes: In recent years, stereo signal paths have increasingly found their way into the wonderful world of Eurorack synthesis - so naturally, utilities should follow suit. Introducing psATT, a simple solution to a problem you might not even realise you had. Far from just useful as an attenuator for audio sources in mixdowns, the psATT can also be used to bring stereo audio signals down to more manageable levels (such as line level), attenuate multiple signals simultaneously (like increasing the modulation depth of two LFO's at the same time! It's like having two hands, but with one hand!) and is even normalled, so if you only have a mono signal, the attenuated signal will be present at both outputs. That's what utility is all about!

There's not much else to say, except that it's passive, and draws no power - and it looks very classy in black and gold; and it's also only 2hp.

Notes: A multi-mode divider for clock and audio signals.

It can be used either for dividing clock signals (e.g. from an LFO, BEATDIVIDER) for rhythmical purposes but also for audio signals - in this case you get subharmonics / lower octaves squarewaves at the outputs, which can be mixed or used separately.

The module has eight outputs which - depending on the selected division mode - provide different division factors of the input signal:

Beat: musical/rhythmical clocks are generated as 1/1, 1/2, 1/4... 1/16 and triplets
Binary: the outputs work as binary counter (same as the predecessor module DIVIDER)
Decimal: The outputs have decimal divisions of the input, meaning half, third, quarter, fifth... of the input clock
Prime: The outputs use the prime numbers as division factors
Fibonacci: The outputs use the numbers of the fibonacci row as division factors

The reset input resets all output signals; in case of audio signals this can get quite unique, ringmodulator-like sounds.

The Shift knob shifts/rotates the outputs; usually, the fastest output is on output 1, but with shift the entire output pattern is shifted so the fastest output can be set to any position 1...8.

Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.

Notes: The 2CVADD-HQ is a dual precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.

The module offers three CV inputs for each of the both units; the first unit has an additional fourth input where the CV is subtracted - meaning "transposition downwards".

If you would like to have transposition buttons to shift by one or two octaves (or a free offset), take a look at the CVADDER-HQ module.

Notes: XMIX is a swiss knife for signal mixing and attenuating, offering four(!) mixers and two attenuators in a 1U module. It is designed especially with very small AE systems in mind.

You get:

A three channel mixer "A" with knobs
a passive mixer "B" with four channels
two four-channel mixers "C" and "D" with full level / one-third-level inputs
two attenuators with seven different attenuation levels

All mixers can be used / switched for audio and CV signals.

Notes: This module is a triple, three-way passive multiple in a compact but ergonomic design; useful for splitting CV signals from modules such as LFOs or envelopes etc.

Being passive; no power is required for the module to function.

Specifications

Format: Eurorack
Width: 4hp
Depth: approx. 15mm
+12V: 0mA
-12V: 0mA
+5V: 0mA

Notes: The DIODEFILTER is an adaption of the well-known diode ladder filter that became most popular by Roland's TB-303 bassline. And here it is for the AE modular!

Notes: NGM - 2×5 Passive Mixer with active Gain

For audio signals and control voltages.

Mixer A and Mixer B with 5 inputs each and level control knob per channel.

Width: 2 HP

Notes: TRS Split - CV/Audio signal distributor

TRS Split is a multipurpose CV and audio signal distribution module. It has three 3.5 mm TRS (tip/ring/sleeve - stereo) jacks and six ordinary 3.5 mm mono jacks.

It contains 3 identical sections set up as following:

Upper jack carries the tip signal
Middle jack carries the stereo/dual signal
Lower jack carries the ring signal

Each section can either split a stereo signal into two mono signals or join two mono signals into one stereo signal. The module does not have any active components and does not need a power supply.

Use cases:

When you plug a stereo signal carried by a stereo (TRS) cable into the middle jack, you receive two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. That way you can attack an "AUX" cable such as from your smartphone to your modular.

Or the other way around: Send two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. Receive a stereo signal at the middle jack to be used with a stereo (TRS) cable.

Converting from stereo to dual mono and back allows you to alter the two sides of a stereo signal with different effects/filters.

Some tuners such as the Korg NTS-2 accept inputs to tune two oscillators combined in one 3.5 mm stereo jack. With one splitter you can easily feed two VCO signals into such a tuner.

Switching sides

Two splitters can be used to switch tip and ring (left and right): Plug in a stereo cable in the middle jack of the first section. Connect mono cables to the upper and lower jack of the first section. Then connect the upper mono cable of the first section to the lower mono jack of the second section and the lower mono cable of the first section to the upper mono jack of the second section. The signals are switched. Plug a stereo cable in the middle of the second splitter and you're good to go.

Hint: This also works for MIDI signals. If you use MIDI over minijack, there are two standards A and B - some manufacturers use A some B - thus not all connections are working. Now you can easily switch between the standards using the TRS Split.

Note: The MIDI input of the DROID X7 automatically detects A and B, so there is no switching necessary. The MIDI output of the X7 can be set to A or B with a switch on the back of the module.

Stereo multiple setup

If you have a separate multiple in your modular, you can use the TRS-SPLIT to create a 1:2 stereo multiple as follows:

Plug a stereo cable in the middle jack of section 1, patch the mono cable from the upper jack into section 1 of your multiple (e.g. a 3/3/3 multiple) and feed two of the outputs back into the upper jacks of section 2 and 3. Do the same with the mono cable coming from the lower jack of section 1 going into the second section of a 3/3/3 multiple and patch two cables back into the lower jacks of section 2 and 3 of the TRS Split. Now the middle jacks of section 2 and 3 both carry the stereo signal.

Dimensions
2 HP
22 mm deep

Current Draw
Module does not draw current

Notes: TRS Tool - Stereo/Dual CV/Audio/MIDI signal multipurpose module

TRS Tool is a multipurpose CV and audio signal distribution module for working with 3.5 mm stereo jacks (tip/ring/sleeve). These jacks are common for stereo audio but also for MIDI.

The TRS TOOL has no active components and does not need a power supply. It contains 3 different sections set up as following from top to bottom:

TRS Split
The upper jack carries the tip signal
The middle jack carries the stereo/dual signal
The Lower jack carries the ring signal

Use cases:

When you plug a stereo signal carried by a stereo (TRS) cable into the middle jack, you receive two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. That way you can attack an "AUX" cable such as from your smartphone to your modular.

Or the other way around: Send two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. Receive a stereo signal at the middle jack to be used with a stereo (TRS) cable.

Converting from stereo to dual mono and back allows you to alter the two sides of a stereo signal with different effects/filters.

Some tuners such as the Korg NTS-2 accept inputs to tune two oscillators combined in one 3.5 mm stereo jack. With one splitter you can easily feed two VCO signals into such a tuner.

TRS Quad Multiple

Multiply a stereo signal. Four TRS jacks to be used with stereo minijack cables.

Use cases:

You could use this to multiply the signal for headphones - listen to patches together.

Or create sends - route one (or two) stereo signals to effects and use the third one as dry signal going to the mixer.

Experimental: multiply a MIDI signal to two or three receivers: NOTE: depending on the output power of the MIDI sender and the power draw of the MIDI receivers this might or might not work. MIDI uses a current of typically 5 mA instead of voltage levels for data transmission. So when you attach too many devices to one output the current might not be enough to drive all of them. So this is strictly spoken not covered by the MIDI standard, but might work anyway.

A/B Swapper
The bottom section of the module consists of two connected TRS jacks.
Whatever signal applies to the tip in jack A will be routed to the ring in jack B.
Whatever signal applies to the ring in jack A will be routed to the tip in jack B.

Use cases:

Switch the left and right side of a stereo audio signal.

Switch between MIDI standard A and B: If you use MIDI over minijack, there's two standards A and B - some manufacturers use A some B - thus not all connections are working. Now you can easily switch between the standards using the TRS Split.

Note: The MIDI input of the DROID X7 automatically detects A and B, so there is no switching necessary. The MIDI output of the X7 can be set to A or B with a switch on the back of the module.

Dimensions
2 HP
22 mm deep

Current Draw
Module does not draw current

Notes: This module is best if you need an oscillator for primary musical / melodic use.? It offers:



- two CV inputs 1V/octave

- Modulation input with Level-knob, switchable to frequency or pulsewidth

- PWM input

- Coarse / Fine knob for frequency

- Pulsewidth knob for square wave

- Square / Triangle / Sawtooth output

Notes: Tilt is the first in Laine's series of core modules, which will take cues from the main product line and strip back the features so both the module width and cost can be shrunk dramatically.

Comprising an 'Ambler' style tilt EQ network similar to the 'Stilts' topology, Tilt allows simultaneous cut and boost of low and high frequencies using a single control.

Tilt control circuits are known for the transparency of their cut and boost curves, coupled with the inherent emphasis gained from cutting one end of the frequency spectrum whilst boosting at the opposite end.

It sounds pretty good on all audio source material but is especially suited to tracking drums, guitar and lead, or manipulating effects sends and returns.

With the control knob at 12o'clock the sound passed is neutral. Turning the control knob clockwise will boost high and cut low frequencies pivoting from a fixed mid-range point. Turning the control anti-clockwise below 12 o clock will in turn boost low frequencies and cut the highs.

In addition to the EQ there is a soft clipping network which will begin to saturate signals over 15 volts peak to peak.

Tilt uses the same high quality OPA op amps, Alpha pots and ENIG PCBs as found in our main product line.

Features

Compact EQ tilt control in 1U
Soft clipping network
High-quality components used throughout

Specifications

Intellijel 1U format
Width 8HP
Depth 28mm
Power requirements ~10mA +12V/~10mA -12V
Impedance Input 100k / Output 1k

Notes: The famous MS 20 filter for AE modular!

This adaptation of the filter used first in Korg's MS-20 synth for AE modular offers control knobs for cutoff frequency, resonance and CV attenuator. Two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter this filter has a significant self resonance and also a very quick response to changes in the cutoff frequency.

The filter type is switchable between lowpass and highpass (LP/HP switch).

Notes: The CVADDER-HQ is a precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.

The module offers four CV inputs where three of them are summed, and the CV at the fourth input is subtracted - meaning "transposition downwards".

This module also allows transposing the incoming CV by one or two octaves or a variable offset by buttons.

A separate output provides the voltage of the internal transposition (+1, +2 octaves / free).

If the transposition buttons are not necessary and you prefer to have a dual precision adder, take a look at the 2CVADD-HQ module.