安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
101150/731(ページ3/15)の商品
«  1  2  3  4  ...  15  »
Cat: 731957 Rel: 03 Jul 19
 
Small compact joystick module with recording function - 8HP
Notes: The module can record the joystick movement up to a length of over a minute. The sequence remains stored in the battery-backed RAM after switching off. When playing the sequence, it can be manipulated in speed and playback direction.

There is a FREEZE function to hold the current joystick position plus an external reset input. In addition, a GATE is set during movement and a CV voltage is output as a function of the joystick movement. The ranges of the X / Y output voltages are bipolar +/- 5v or unipolar from 0 to + 10v. Both channels X and Y have a passive attenuator potentiometer, so that the voltage range can also be set lower.
Read more
 1 in stock $159.77
Click for better price!
quote 731957
Cat: 690905 Rel: 17 Dec 18
 
Flagship oscillator featuring ten individual waveform outputs - 26HP
Notes: We are proud to present our newest workpiece: The ACL Multifunction Discrete VCO combines a massive single saw tooth core with a strong sub oscillator - each of them with its individual wave shaper. As usual, we didn't spare any effort to bring you the best quality - from the inside right to the outside.

The module comes with saw, inverted saw, PW rectangle, triangle and sine - all important waveforms of a proper modular unit are featured. We constructed all signal paths in fully discrete design up to the outputs - but it is much more to it than just a clone of a classical VCO:

If you play with the linear detune, it is possible to create awesome "beating effects" between two or more VCOs. The direct relation between the linear detune and VCO response makes it possible to use the same frequency at every pitch - for an atmospheric, rich and alive sound.

If you play the VCO in LFO mode, the module enables to control the speed in the same way as in VCO mode. If you leave V/Oct CV, you can generate very long lasting sweeps.

Another strong feature are the big syncing capabilities: Adjust the sync amount manually or via CV between the range of sync and no sync - and surf through variable degrees from soft to hard sync.

The core should sync to all repeatable waveforms - approximately exceeding 1 V pp - but in case sync wave is important for some applications, it is possible to choose between falling and rising edge sync in order to hold the proper phase relation between the syncing and the synced wave.

The Gate Input gives you the option to reset the VCO core at the beginning of every note. This feature is highly recommended for the creation of bass and percussion patches if every attack should sound equal and systematic at each time the notes are played. The Gate Input can be used as hard-sync input as well, even in the same time with the Sync input.

You are free to modulate both the oscillator and sub oscillator rectangle wave pulse widths through their separate PWM Ins and PW pots.

On top of this, you also have the possibility to choose between different PWM "carrier" waves to change the PWM-behaviour: Rising and Falling Sawtooth will create an unsymmetrical PWM, while Triangle will create a very musical sounding symmetrical PWM.
Read more
 1 in stock $738.84
Cat: 742228 Rel: 05 Sep 19
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: More aggro filth from the troubled minds at Schlappi Engineering. This time it's a distortion/filter module with touch-sensitive metal conductors for hands-on control. Screaming saturation and self-resonance ideal for angry techno. Nasty.

Supplier notes:
The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 2 in stock $273.45
Click for better price!
quote 742228
Cat: 739126 Rel: 16 Jul 19
 
Expanded take on Mutable Instruments' famous Clouds granular texture synthesiser - black faceplate, 34HP
Notes: Clouds, the granular synthesis module from Mutable Instruments, was discontinued in 2017. Supercell brings back Clouds in a more accessible 34 hp form factor, offering an improved user interface and several additional features:

- Each of the Blend parameters (Feedback, Panning, Mix, and Space) have dedicated knobs with their own CV inputs and inverting attenuators (attenuverters).

- The inputs and outputs now have mute switches, stereo VCAs, and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- A stereo output gain control has been added, providing an additional +6 dB of gain to compensate for low output levels when using certain parameter combinations.

- The complex process of changing the sampling time and managing presets has been simplified with dedicated switches and status LEDs.

- Extensive modulation options for all parameters including direct patching of external CV, distribution of one CV to all parameters via the AUX input, or an internal smooth random CV that is normalized to any unpatched inputs when AUX is also unpatched. The attenuverters control the modulation depth in all three cases. As of firmware v1.01 the internal modulation rate can be adjusted within a range of 1 to 100 Hz.

- The inputs and outputs now include stereo VCAs and separate VU meters. The knobs act as offset controls when their respective VCA inputs are patched.

- Pitch is now controlled by two separate inputs: the V/Oct input is exponential and the Pitch input is linear. When both inputs are used, their voltages are summed.

- A manual Trig switch (for capturing individual grains) has been added, in addition to the Trig input that was present on Clouds.

All other features of the original Clouds remain intact, including access to the alternate modes. Thanks to Olivier Gillet for making the original Clouds hardware and firmware available under open-source licenses. Third-party firmware such as Parasites (by Matthias Puech) and Beat Repeat (by Julius Kammerl) will be supported in future firmware updates after the initial release of the module.
Read more
 3 in stock $481.47
Click for better price!
quote 739126
Cat: 673911 Rel: 15 Jan 18
 
Balanced TRS 1/4" input path to Eurorack modular signal level
Notes: This module allows you to connect balanced line level audio (+4 dBu) into your Eurorack modular system. It is a compact and easy way to patch in a rack mount/desktop FX units, external line-level instruments like synths and drum machines, outputs from your DAW, or many other line level sources.
Read more
 1 in stock $41.28
Cat: 643391 Rel: 29 May 18
 
Updated version of the Springray module with added parametric EQ
Notes: There are many excellent digital reverbs available these days but there is still nothing quite like the timeless and magical character of a true spring reverb.

For the Intellijel Springray II, each tank has a totally different set of characteristics, with many unexpected surprises when feeding it through a wide variety of sound sources. One of the most interesting results is how a slow attack saw waveform from a Dixie almost sounds like a realistic cello!

Version two of the Springray provides a number of changes and improvements to the original design. The shelving EQs have been replaced with a parametric EQ with frequency, Q, and gain controls. The CV inputs for feedback and mix balance have been replaced with inputs to control the filter frequency and gain. Lastly, the feedback and limiter circuits have been redesigned, and the drive quality has been improved.

PLEASE NOTE: Does not include Spring Reverb Tank.
Read more
 1 in stock $233.76
Cat: 687873 Rel: 01 May 18
 
Unique contact microphone & amplifier, based on Tom Whitwell's open-source module - 4HP
Notes: Ears is Mutable Instruments' take on Tom Whitwell's open-source Mikrophonie module - a contact microphone and amplifier.

A large palette of organic, physical sounds can be generated by scratching, tapping, and more generally collecting any kind of acoustic waves surrounding your modular case - even speaker feedback.

With its built-in envelope follower and gate detector, it can also be the gateway between external audio sources and your modular system.

Ears for your modular:

- Built-in contact microphone soldered right under the front panel, turning the panel and your entire case into a microphone.

- Increasingly spaced ridges on the panel, generating sonically interesting pulses or impulse combs when rubbed. Strike, pick or scratch digital resonators like Rings, Elements or the 4ms SMR.

- High-quality amplification stage suitable for external contact microphones, electro-acoustic instruments like guitars, or plain line-level signals.
Read more
 9 in stock $90.07
Cat: 704130 Rel: 01 Oct 18
 
Multimode filter based on the Steiner-Parker design - 8HP
Notes: Welcome to the Forbidden Planet, an all analogue multi-mode filter design influenced by the 1975 Steiner-Parker Synthacon model. Control the Forbidden Planet manually or through CV and take the sound of your Eurorack into new orbits.

Forbidden Planet has three filter input jacks: High Pass, Low Pass and Band Pass. The High Pass section is this module's signature sound - a crisp sharp-cut with no residue, designed to add High Pass filtering capability to Tiptop Audio's wide range of Eurorack modules. Send a throbbing kick drum through the High Pass section and filter out the rumbling lows while maintaining the pulse of the beat. The Bandpass is clear and useful in isolating a pie-slice-range-of-frequencies while cutting off the low and highs, great for accurate sound design or sculpting audio into that sweet spot. The Low Pass is an airy classic 12db two-pole analogue slope ideal for monophonic synth patches and filtering down to the essential low-end bass we all love.

The Forbidden Planet Resonance utilizes an internal feedback path which can sound smooth or aggressive depending on the knob setting. At a low setting, it emphasizes the cut-off harmonics, at middle settings it begins to self-oscillate, and towards maximum setting it forms interesting tones and all sorts of chopped grainy bits of self-oscillation perfect for entering into a sci-fi world.

The Forbidden Planet is an impressive multi-mode analogue filter which adds a broader filter spectrum to the Tiptop Audio modular family and unlocks forbidden creative possibilities in a small package.
Read more
 4 in stock $107.22
Cat: 739049 Rel: 19 Jul 19
 
Headphone amp capable of driving high impedance headphones via a 1/4" stereo Neutrik jack
Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.
Read more
 3 in stock $142.62
Cat: 739050 Rel: 19 Jul 19
 
Three-channel active/buffered attenuverter & summing mixer
Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Read more
 1 in stock $109.38
Cat: 557491 Rel: 19 Dec 14
 
Two channel low pass gate synth module
Notes: A two channel Low Pass Gate, providing simultaneous voltage control over amplitude and frequency content of a signal. It is in essence, a Voltage Controlled Filter Amplifier (VCFA) that has an extremely organic response to control signals. The Low Pass Gate is a classic West Coast synthesis circuit.

Revision 2 adds audio side-chain compression and expands CV generation and processing capabilities.
Read more
 2 in stock $199.44
Cat: 688915 Rel: 25 Jun 18
 
Open-source, cartridge-based, digital sound processing & generating platform
Notes: Tiptop Audio's Z-DSP is a cartridge-based open source digital sound processing and effects generating platform for your modular synthesizer. Lush audio processing, greater stereo depth and a unique set of digital synthesis is what the Z-DSP is all about.

The Z-DSP has a stereo digital sound processor with 24-bit sampling, 15kHz of bandwidth, voltage-controlled parameters of stereo feedback, program switching, DSP parameters, equal power crossfading dry/wet mixing, as well as sequential program control switching and a clear display - all in Eurorack format. A dedicated clocking input for the DSP chip does wonders to passing sound by bending the algorithms in an unexpected way, a hardware technique computer plugins can't do and is unique to the Z-DSP.

In a recent update, the Z-DSP (NS) got an all new design of its analogue circuitry, contributing to a lower noise signal path, clearer sound of the entire frequency range, lower distortion and better immunity to noise emitted by other modules sharing the same power supply. A new analogue dry/wet circuit has been implemented to remove the 3db gain drop when the mix knob passes through the centre of the dial making the use of this function more practical in a live application. A reverse polarity protection has been added as well. The new front-panel matches Tiptop's colourful design, and a single printed circuit board and surface mount technology improve reliability during production and use. The powerful Z-DSP engine remains the same as the original Z-DSP module and all cards are compatible across both versions.

An assortment of interchangeable cards, programmed by Tiptop Audio and specialists like Valhalla DSP, provide a wide range of boutique effects algorithms such as Halls of Valhalla, Time Fabric, Clocked Delays and Grain De Folie. Tiptop Audio also offers blank Z-DSP cartridges and a development tool called NumberZ for developers, students and power users who want to design their own effects and cards with the FV-1 DSP chip programming language. Blank cards can be loaded using programs that are freely available for non-commercial use and can be found in the modular community through online forums. With each card swap, the Z-DSP takes on new effect algorithms, changing like a digital chameleon and bringing colourful digital effects processing to your Eurorack setup.

The Z-DSP comes included with 2 cards: Halls of Valhalla and Dragonfly Delay MKII.
Read more
 1 in stock $417.13
Cat: 569586 Rel: 30 Jun 15
 
MIDI interface and MIDI event processor Eurorack synth module with 4 CV outputs and 4 trigger/gate outputs - 12HP size
Notes: Yarns is a MIDI interface providing up to 4 channels of CV/Gate conversion, and providing some of the MIDI message processing features of Mutable Instruments' MIDIpal, including arpeggiator, euclidean sequencer, and a SH-101 inspired step sequencer.

Yarns provides 4 CV outputs and 4 Gate/trigger outputs, which can be assigned to up to 4 voices. In single voice mode, note, velocity, modulation and aftertouch (or other CC) CV are produced, along with a gate, a trigger, and a clock/reset output. In two voices mode, two channel of note, modulation or aftertouch CV are produced, along with two gates, and clock/reset outputs. Finally, in four voices mode, four pairs of CV/Gate outputs are provided.

The 2 and 4-voice modes are available both in a "polyphonic" and "multitimbral" flavour. The former receives chords from one single MIDI channel and dispatches them to the voices; while the later provides independent monophonic parts - which can be addressed to different MIDI channels, keyboard ranges, or even velocity levels. Various note priority modes (low, high, last) and polyphonic allocation schemes (voice-stealing, random, cyclic) allows you to fine-tune the CV/Gate conversion to your playing style. Each voice has a built-in digital LFO to interpret modulation wheel messages as a vibrato; can respond to pitch-bend messages; or can be smoothed with a glide/portamento control - no need for a dedicated module and patches to get the right response from a MIDI keyboard!

Each part can generate sequences either through an arpeggiator/euclidean sequencer combo; or with a SH-101 style sequencer with step-by-step recording, storing up to 64 notes. The module can sync to an external MIDI clock, and generate a clock/reset output at any subdivisions of the MIDI clock.

Other unique features include support for microtunings (either through standard MIDI messages or from a selection of historical tunings or indian ragas), just intonation, and an audio output mode which can transform one, two, or four of the CV outputs into simple digital oscillators.
Read more
 2 in stock $265.93
Cat: 569587 Rel: 10 Apr 15
 
Dual Bernoulli gate synth module, 6HP size
Notes: A Bernoulli gate takes a logic signal (trigger or gate) as an input, and routes it to either of its two outputs according to a random coin toss. The knob controls how fair the coin toss is - with the knob in minimal position, the first output always win, with the knob in maximal position the second output always wins - with random fun in-between. And obviously, this bias is CV-controllable!

Branches packs two such gates in a small 6-HP panel. Get a sequencer to randomly skip steps, randomize drum patterns, dispatch events from a sequence to two subpatches, or patch a monster modular Pachinko machine...

Input specifications: 100k impedance, 0.6V threshold.
Output specifications: 5V HIGH level.
Response time: 15us.
6-HP.
Current consumption: +12V: 10mA, -12V: 1mA.
Read more
 2 in stock $94.35
Cat: 557453 Rel: 19 Dec 14
 
Compact voltage controlled oscillator (VCO) module specifically designed for generating SINE waves
Notes: A compact Voltage Controlled Oscillator designed for generating SINE waves, Variable wave-SHAPEs, SUB-Octaves, Oscillator SYNC and Linear FM in the analog domain.

The Sub-Timbral Oscillator is the more subtle and melodic friend to the DPO's complex harmonic lattice.
Read more
 1 in stock $190.86
Cat: 557504 Rel: 19 Dec 14
 
Output interfacing synth module with the added functionalities of FX Loop
Notes: Rosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system.

It is designed to facilitate live performance on the modular synthesizer by allowing the artist to preview and modify portions of a patch using the Auto-CUE system, while the audience is listening to a different portion of the patch as selected by the crossfader.

Additionally it allows for Stereo processing of all sounds via the FX Loop. The Rosie is suitable for headphone monitoring of the modular system and interfacing the modular system to a recording environment. Internal Level Matching and Limiting w/ overload indication makes it easy to connect the modular system in the studio or on stage.
Read more
 1 in stock $137.26
Cat: 563706 Rel: 10 Mar 15
 
Wavefolder/waveshaper synth module with cv input and dedicated attenuator
Notes: The uFold is a collaborated design with David G. Dixon.

This is the version II of the original uFold.

We looked very closely at how some of the most loved timbre shaping circuits worked in classic synth modules; Not just in how they were implemented electronically but how they sounded and how efficient they were to get great sounds. it was important that their design was very versatile in range of timbres but still easy to use and with well thought out control ranges.

When combining the Dixie, uVCA, uFade and uFold you can achieve extremely complex palette of sounds with just a few modules!
Read more
 1 in stock $154.42
Cat: 718062 Rel: 18 Feb 19
 
2-channel quantizer & step sequencer - 8HP
Notes: Scales is an 8hp dual-channel note quantizer and step sequencer. Fundamentally, it takes an input voltage, quantizes it to notes in a user-defined scale, and sends that quantized voltage to an output, where you can use it as a melodic pitch source for oscillators or any other module that expects to see discreet note values at its input.

Scales goes far beyond the fundamental, allowing you unprecedented control of the pitches and intervals hiding inside your control voltages; turn LFO's into arpeggiators; random voltages into harmonic counterpoint; and unquantized external CV sequencers into chromatically tuned note sequencers.

Quantization can be locked to an incoming trigger. There are a number of trigger output options as well, ranging from no triggering (good for pitch shifting drones); through triggers that sync with either of the two outputs (or both); to a trigger or gate transmitted in sync with one sent to the module's TRIG input.

Shift:

Scales features two independent outputs, enabling you to create shifted harmonic intervals within your chosen scale using only a single pitch input. Using the SHIFT input you can modulate changes on OUT A and/or OUT B.

You can also use the shift input to switch between scales or to change the root of any existing scale pattern or split Scales into two quantizers - each conforming to a common scale, but fed entirely different voltage sources.

Sequence:

Scales also features a 128-step SH-101 style step sequencer (complete with storage for up to 35 fully programmable patterns) - allowing you to feed OUT B with sequenced notes and rhythm patterns, while OUT A continues to function as a standard pitch quantizer for external voltages. You can even sync the sequencer to quantizer events on OUT A.
Read more
 1 in stock $276.65
Cat: 643381 Rel: 27 Mar 17
 
Lo-fi digital reverb effect unit
Notes: Digiverb is a lo-fi reverb effect unit that uses an Accutronic digital reverb "tank" module. The sound is somewhere between a virtual spring reverb and a dense multi tap delay but the effect is quite musical and interesting.

Use the Digiverb as a simple and fun way to add some extra dimensions to your patches!
Read more
 2 in stock $77.20
Click for better price!
quote 643381
Cat: 616167 Rel: 09 Jun 16
 
4 channel coltage controller signal polarizer synth module - 12HP wide
Notes: Blinds is a 4-channel voltage-controlled signal polarizer. Each channel consists of a polarizer circuit, also known as a four-quadrant multiplier. This circuit acts like a VCA, except that a negative control voltage will cause the output signal to be inverted, instead of being silenced. Blinds' outputs are daisy-chained, allowing adjacent groups of 2, 3, or all 4 channels, to be mixed together.

One can think of Blinds' as a voltage-controlled version of Shades, the control center for all the modulation CVs used in a patch. Many other uses are possible, though. For example, each individual channel can be used to scale/offset a CV; and with audio rate modulation signals, each channel acts like a ring-modulator, with massive potential for drones and feedback patches.
Read more
 3 in stock $155.49
Cat: 595782 Rel: 19 Jan 16
 
Percussion module based on sounds from a classic 909 - 8HP wide
Notes: Tiptop Audio Cymbal 909

The module was designed, tuned and tested to sound like the crash and ride sounds from a 909 fresh off the factory line. The sound circuits use a combination of low-fi 6 bit sound samples that pass through a series of analog elements that provide envelope and filtering to the source sound.
TipTop Audio enhanced the circuits by adding manual and voltage controllable tuning to each voice which result in a wide sound range: from hard industrial sound at the low end to the original crash/ride sounds to brilliant HihHts at high settings.

Like other TipTop drum voices also the Cymbl909 has high output level, allowing you to further enhance the sound by distortion and clipping. Play dynamically with the volume of the drum sounds with the Accent parameter, whose CV input is normalized to the gate input. Which means you just need to turn up the accent knob to play the sound with full punch.

Crash: tune CV input; gate input, normalized to accent CV input; Crash audio output
Ride: tune CV input; gate input, normalized to accent CV input; Ride audio output

60 mA +12V
40 mA -12V
0 mA 5V
8HP
Read more
 1 in stock $149.05
Cat: 620696 Rel: 10 Aug 16
 
Analog compressor and tone shaper synth module in Eurorack format - 18HP wide
Notes: Analog coloring compressor module:

- 100% analog signal path and sidechain feedforward compressor
- Unique (log based RMS) detector
- Output routed through a specially selected Edcor transformer with highly desirable saturation qualities.
- Three carefully designed analog circuits to impose specific character on the output signal:
- TUBE adds non-linear distortion providing second order harmonics
- TAPE adds symmetrical distortion providing both even and odd harmonics
- XFRM modifies the transformer feedback circuit, giving a boost to low bass content
- All three color circuits can be engaged in any combination to react differently based on the input drive level and makeup gain
- Sidechain routed through a voltage controllable SVF filter with LP, BP and HP modes. A trimmer on the PCB allows you to adjust Q. This filter can be used independently of the rest of the module.
- External sidechain input allows triggering of the compressor with external sources.
- Link IN/OUT allows two Jellysquashers to be chained together for stereo operation.
- Full CV control of sidechain cutoff, threshold, ratio, attack time, release time, and makeup gain.
- Wet/Dry control allows for "New York" style compression where there is a blend of the dry and compressed output signal.
- LED bargraph with selectable display modes to view the signal level in VU or the gain reduction in dB.
Read more
 1 in stock $321.69
Cat: 687377 Rel: 19 Jun 18
 
Compact Eurorack module based on the SH-5 monophonic synth filter section
Notes: Inspired by vintage Roland modular synths of the 1970s, these new additions to the SYSTEM-500 family not only expand on the SYSTEM-100m-based modules, but also explore fresh territory. Designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of vintage Roland modular synths, with all the advantages of a modern instrument. The SYSTEM-500 is made to exacting standards in a collaborative design and production process between Malekko in Portland, USA and Roland in Hamamatsu, Japan.

Classic System. New Format:

The SYSTEM-500 consists of Eurorack format modules that you can mix and match in any combination to create the ultimate Roland modular synthesiser. Each module is completely analogue and has been designed for maximum compatibility with the world of contemporary synthesiser and effects modules. The SYSTEM-500 is a compact, powerful system that opens vast possibilities for sound design and musical exploration.

SYSTEM-500 505 VCF:

Inject the sound of the Roland SH-5's revered filter section into your modular rig. The Roland SH-5 is one of the most sought after monosynths in history. Its dual architecture was deep and sounded massive. It also happened to have one of the most distinguished filters of any monosynth in history. Combining a multi-mode filter with a band-pass filter, it produced a sound that has propelled it to "favourite filter ever" territory for many. In stark contrast to the traditional Ladder filter design, the SH-5's filter maintained its bass response with a meaty resonance growl. With the SYS-505, Roland and Malekko have brought this highly-coveted filter, in all its sonic glory, to the Eurorack format. With switchable outputs, built-in VCAs, and CV control of cut-off, resonance, this dual filter gives you two different vintage filter characters in a flexible and compact 16hp module.
Read more
 2 in stock $320.63
Click for better price!
quote 687377
Cat: 687380 Rel: 20 Aug 18
 
Versatile Eurorack module inspired by Roland Systems-100m's output synthesiser
Notes: Inspired by vintage Roland modular synths of the 1970s, these new additions to the SYSTEM-500 family not only expand on the SYSTEM-100m-based modules, but also explore fresh territory. Designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of vintage Roland modular synths, with all the advantages of a modern instrument. The SYSTEM-500 is made to exacting standards in a collaborative design and production process between Malekko in Portland, USA and Roland in Hamamatsu, Japan.

Classic System. New Format:

The SYSTEM-500 consists of Eurorack format modules that you can mix and match in any combination to create the ultimate Roland modular synthesizer. Each module is completely analogue and has been designed for maximum compatibility with the world of contemporary synthesizer and effects modules. The SYSTEM-500 is a compact, powerful system that opens vast possibilities for sound design and musical exploration.

SYSTEM-500 531 MIX:

Inspired by the SYSTEM-100m's 131 output module, the SYS-531 brings an updated approach with convenient and modern features. With six high-quality inputs, each with level slider, pan knob, and performance-friendly mute button, the SYS-531 is your central hub for mixing mono or stereo (PRE only) signals. It has high-fidelity sound with low noise, ensuring that your modular rig sounds its best. The six pan knobs are CV controlled so you can create space and dimension, and achieve interesting stereo effects. There's even a boutique-quality stereo preamp, so you can bring in mic or line level signals -and abusing this preamp's gain knob gives you pleasing overdriven tones. The headphone section has an easy-to-reach, dedicated volume knob as does the multi-format output section that lets you use both 1/4"and 1/8" cables. There's even an LED level indicator for visual feedback.
Read more
 1 in stock $407.49
Click for better price!
quote 687380
Cat: 581798 Rel: 04 Jan 16
 
Dual envelope generator & low frequency oscillator (LFO) eurorack module - 16HP wide
Notes: Based on the classic SYSTEM-100M modular synthesizer, the SYSTEM-500 is a fully analog recreation of one of the most revered electronic instruments of all time. Newly designed in Eurorack format, the SYSTEM-500 delivers the classic character and functionality of the original with the advantages of a modern instrument. Built in the USA and assembled in Japan, the SYSTEM-500 is made to exacting standards with top-quality components and solid controls. And it's surprisingly affordable, turning the fantasy of finally owning this legendary instrument into reality.

The SYSTEM-500 consists of Eurorack format modules that you can mix and match in any combination to create the ultimate Roland modular synthesizer. Each module is completely analog and has been designed for maximum compatibility with the world of contemporary synthesizer and effects modules. The SYSTEM-500 is a compact, powerful system that opens up vast possibilities for sound design and musical exploration.

The 540 Dual Envelope Generator and LFO (low frequency oscillator) is a multi-purpose modulation source. This unit features two independent ADSR (attack, decay, sustain, release) envelope sections that produce variable voltages for controlling other Eurorack format synthesizer modules such as oscillators, filters, and VCAs. Each section can be triggered externally, internally, or manually with dedicated jacks for each envelope, as well as an inverted output.

Additionally, the 540 includes a voltage controlled LFO with 5 waveform outputs. Front panel controls adjust both frequency and delay time of the LFO start. Delay and reset can be triggered from either envelope 1 or 2.
Read more
 1 in stock $303.18
2hp
Cat: 649102 Rel: 11 May 17
 
Stereo reverb Eurorack module
Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.
Read more
 2 in stock $105.08
2hp
Cat: 649106 Rel: 11 May 17
 
MIDI Eurorack module
Notes: MIDI is a plug and play solution for interfacing with your computer or MIDI hardware. Four modes provide monophonic, duophonic, dual mono, and quad trigger operation.

MIDI clock, CC messages, and note on messages are all easily accessible between the four modes. The status LED provides clear indication of MIDI data being received by the module. Class compliant MIDI device on Mac/PC/Linux. Get connected with MIDI.
Read more
 1 in stock $90.07
2hp
Cat: 686043 Rel: 04 May 18
 
Multi-scale pitch quantizer
Notes: Tune is a multi-scale pitch quantizer. It features 11 scales ranging from chromatic to octatonic with everything in between. In addition, the bias control allows the user to transpose the melody to a different octave or starting note.

This functionality opens up every musical mode for each of its 11 scales and provides a performable control for transforming melodies on the fly.
Read more
 1 in stock $86.85
2hp
Cat: 638778 Rel: 21 Feb 17
 
Full featured two stage envelope generator module
Notes: EG is a full featured two-stage envelope generator. In addition to a colossal range from 3ms to 11 minutes per stage, EG features the ability to switch between linear and exponential curves on the fly, a built-in attenuator, and CV over attack and decay. Boasting more features than modules five times its size, EG can fill any envelope-sized gap in your system.
Read more
 1 in stock $83.63
2hp
Cat: 686006 Rel: 04 May 18
 
Four stage linear envelope module with two expressive ranges
Notes: ADSR is a four stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.
Read more
 1 in stock $95.43
Click for better price!
quote 686006
2hp
Cat: 686028 Rel: 04 May 18
 
Signal splitter module
Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.
Read more
 1 in stock $36.45
2hp
Cat: 680015 Rel: 12 Mar 18
 
Random voltage generator & gate source
Notes: Rnd is a random voltage generator and random gate source with an internal clock.

The quantized and smooth outputs are completely independent, and each feature an attenuator to fine tune the output voltage between 0V and 10V. This allows for a musically useful range to be defined. When externally clocked, random gates erupt from the gate output.

Great for modulation and chaotic rhythmic events, Rnd is a universal solution for adding unpredictability to your system.
Read more
 1 in stock $91.14
2hp
Cat: 686020 Rel: 04 May 18
 
Versatile hi hat with six oscillator architecture
Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.
Read more
 1 in stock $122.24
2hp
Cat: 686022 Rel: 04 May 18
 
Compact voltage controlled LFO featuring 8 waveforms
Notes: LFO is a voltage controlled low frequency oscillator. 8 waveforms are available with smooth morphing between each, allowing for complex and unique patterns.

In addition to sine, triangle, sawtooth, and square waveforms on the primary output, four alternate waveforms are accessible simultaneously via the secondary waveform output. The alternate waveforms have been designed with modulation in mind and provide an innovative voltage source to use on filters, oscillators, and everything else.

Animate your modulations with LFO.
Read more
 1 in stock $94.37
Click for better price!
quote 686022
2hp
Cat: 686037 Rel: 04 May 18
 
Snare drum module featuring classic to esoteric snare sounds & blips
Notes: Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
 1 in stock $116.87
2hp
Cat: 667369 Rel: 31 Oct 17
 
Gate-driven arpeggiator
Notes: Arp is a gate-driven arpeggiator with a multitude of chord types and playback modes. Voltage control over both root note and chord type allow for sequencing any combination of chords in any key imaginable.

With the rate of the arpeggio and reset capability in your own hands, you're free to create dynamic rhythmic melodies from your favourite chords. Take your tonality for a ride with Arp.
Read more
 1 in stock $106.15
2hp
Cat: 686040 Rel: 04 May 18
 
Random sequence generator module
Notes: TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user's probability settings. By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you're looking for a controlled random source, or an evolving melody generator, TM has you covered.
Read more
 1 in stock $98.64
Click for better price!
quote 686040
2hp
Cat: 686042 Rel: 08 May 18
 
2 channel passive attenuator
Notes: Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.
Read more
 3 in stock $40.21
Click for better price!
quote 686042
2hp
Cat: 709206 Rel: 05 Dec 18
 
Compact sampler featuring Micro SD slot for easy sample loading - silver faceplate
Notes: Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.
Read more
 1 in stock $138.32
2hp
Cat: 727385 Rel: 02 Oct 19
 
High fidelity audio processor focused on granular synthesis
Notes: 2hp Grain is a high-fidelity audio processor focused on granular synthesis. It's capable of generating granular clouds, microsound phrases, and unique textures that are derived from any input signal. The Density control sets the rate of granularization applied to the input signal and sets its position within the buffer. The Mix control sets the balance between live input and the granular audio stream for dialling in the perfect combination of sounds. In addition, there is a frequency control and associated v/oct input allowing for pitch accurate sequencing of grains. Particle patching has never been smaller with Grain.
Read more
 1 in stock $156.55
Click for better price!
quote 727385
2hp
Cat: 714255 Rel: 17 Dec 18
 
Speech synthesiser/formant oscillator with speech & FOF synthesis algorithms - 2HP
Notes: Vowel is a speech synthesis and formant oscillator. It synthesizes and approximates the human voice by generating vowel sounds. These can be manipulated to provide deep low baritones, or high pitched squeaks. Two unique algorithms provide separate takes on this exciting synthesis method and allow for a multitude of talking synth sounds.
Read more
 1 in stock $84.71
2hp
Cat: 686016 Rel: 04 May 18
 
Rhythmic pattern generator
Notes: Euclid is a rhythmic pattern generator based on ideas originally presented by Euclid, the Greek mathematician. The Euclidean algorithm can be adapted to create rhythms by taking the total number of active steps in a sequence, and then distributing them across the entirety of the pattern.

This creates cyclical rhythms that are immediately musical and can be used for everything from EDM to IDM. Bring your patches full circle with Euclid.
Read more
 1 in stock $96.50
Click for better price!
quote 686016
2hp
Cat: 686047 Rel: 04 May 18
 
Lush sounding, voltage controllable stereo reverb
Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.
Read more
 3 in stock $111.51
Click for better price!
quote 686047
2hp
Cat: 686009 Rel: 04 May 18
 
Dual utility attenuverter - 2HP
Notes: AVert is a dual attenuverter. Each channel offers the ability to attenuate and invert any input signal. The signal present at channel one is normalled to channel 2, allowing for two unique output signals from a single input. Get Inverted.
Read more
 1 in stock $79.35
Click for better price!
quote 686009
2hp
Cat: 706870 Rel: 15 Oct 18
 
Voltage controlled multi mode filter
Notes: MMF is an analogue, multimode filter with a 12dB per octave slope. Its sonic character swings all the way from classic low pass to squelchy acid lines. Simultaneous outputs of low pass, high pass, and band pass filter types are provided allowing for many variations of the input signal. Whether you're looking for smooth and creamy, or resonant and wild, MMF can go there.
Read more
 1 in stock $102.93
2hp
Cat: 727388 Rel: 23 May 19
 
Digital oscillator module with sub output & wavefolding - silver
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
 1 in stock $136.18
2hp
Cat: 635861 Rel: 30 Dec 16
 
Signal splitter module
Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.
Read more
 2 in stock $32.16
Cat: 584248 Rel: 15 Apr 16
 
Dual channel stepped voltage source and adder synth module - 6HP wide
Notes: 'Beast's Chalkboard' is dual channel stepped voltage source and adder for your eurorack modular synthesizer system. It primarily is intended as a dual octave switcher for VCO's but has many other uses including sequence transposition, FM ratio creation, buffered CV distribution and VCO calibration.

Technical Specifications:

Supply: +/-12V (Reverse voltage & polyfuse protection)
Current Draw: ~30ma
Size: 6 HP
Depth: 22mm (including power header)
Offset Error: +/- 10mV
Read more
 7 in stock $101.86
Cat: 584252 Rel: 15 Apr 16
 
12bit digital drum voice synth module with full voltage control and an analog EQ output path - 12HP wide
Notes: Dinky's Taiko' is a 12 bit digital drum voice with full voltage control and an analog EQ output path.

The drum voice consists of 3 parts; a digital noise source with controllable frequency and release time, a wavetable oscillator with start and end frequency settings together with a variable rate (and release time, and finally a mix and tone control for the audio output. All settings, bar the tone control, are both direct and voltage controllable.

The drum voice includes a trigger input as well as accent and choke trigger inputs to add further expressive and rhythmic control.
Read more
 2 in stock $201.59
Cat: 584261 Rel: 15 Apr 16
 
Dual voltage controlled oscillator (VCO) synthesiser module with authentic 4 operator digital FM - 38HP wide
Notes: 'Akemie's Castle' is a dual voltage controlled oscillator with authentic 4 Operator digital FM using 'new-old-stock' Yamaha IC's for audio signal generation.

Each of the 4 operators feature independent waveform selection, frequency multiplier and level control via direct panel operation and voltage control. Operators can be combined in various ways across both oscillators, which together with independent feedback control on each VCO, offer an extremely wide palette of sounds.

Oscillator A also features a chord mode providing a range of up to 5 voice chords and voltage controlled inversion.
Read more
 4 in stock $476.11
101150/731(ページ3/15)の商品
«  1  2  3  4  ...  15  »

Filter

Saved Searches
Save current search
Release Date
Close