ダンスミュージック検索結果

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Up to eight voices of digitally synthesised drums, percussion and synth sounds from this versatile module, featuring virtual analogue models as well as FM and wavetable options.

Supplier's Notes:
Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: The STEREO FX module brings hi-fi stereo effects into the Erica Synths Drum Series. Based on Erica Synths' new DSP engine, the module provides a wide range of custom delay and reverb effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features

Hi-Fi stereo FX module
3 delay and 3 reverb effects
Tap and clock synchronization of delay time
Delay time divisions and multiplications in sync mode
10 preset patches
CV control over delay time, feedback, and preset selection
The FX is developed in collaboration with the Dutch company 112dB which offers some of the best-sounding VST instruments.

Technical specifications:

Audio input level: -5V - +5V
Delay time: 3ms - 3s
CV level (full span): -5 - +5V
Power consumption: +123mA, -40mA
Module width: 10HP
Module depth: 35mm

Notes: Stereo version of Erica's DJ-style filter module designed with drums in mind. Simple three-knob interface gives control over joint low-pass/high-pass resonant filter with CV input.

Supplier's Notes:
As its name suggests, the Erica Synths DJ VCF STEREO module provides sound treatment functionality typically found on DJ decks - it is fully open when the cutoff knob is at 12:00. When turned counter-clockwise, lowpass filtering is applied and when turned clockwise, highpass filtering is initiated. Additionally, there is a nice-sounding, adjustable resonance parameter. This provides hands-on control over the sound during performances as well as unconventional timbre modulations that are hard to achieve with conventional state variable filters.

Features

Fully analogue stereo DJ-style VCF
Manual cutoff and resonance control
Two cutoff CV inputs, one with an attenuverter
Technical specifications:

Audio level: 10Vptp
CV level: -10V - +10V
Filter slope: 24dB/oct
Power consumption: +109mA, -101mA
Module width: 8HP
Module depth: 35mm

Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.

Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.

In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.

With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.

Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.

Features

Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout

Specifications

Intellijel 1U format
Width: 18HP
Depth: 32mm
Power requirements: ~60mA +12V/~58mA -12V
Control voltage range: 0-8V
Impedance Input: 100K / Output 1K

Notes: Sixteen Seconds Delay vintage eurorack version, inspired by the original looping delay from 1983.

The device topology is the same as first digital delays from that era, with an all-analogue signal path, pre emphasis and de-emphasis, compression and expansion, antialias and reconstruction filtering and input output buffering and mixing.

Digital processing is limited only to analogue to digital conversion, memory management and storage and digital to analogue conversion, all in glorious eight bits.

There's also an analogue triangle Low Frequency Oscillator for modulating delay time/pitch Maximum delay time has been increased to 32 seconds, there are toggle switches for slow/fast speed/pitch , freeze function and reverse playback.

On board modular inputs for CV control of sample rate, infinite/freeze, reverse, slow/fast, reverse, delay line retrigger for sync and stutter experimentation.

Slider illuminated controls are delay time coarse, delay time fine, sweep rate and depth, feedback and mix.

Proudly hand built in Uruguay, by Maneco Labs also creators for the Grone Drone machine Eurorack, Tabletop and Pedal drone generators among others.

Notes: The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier. But the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content. When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

The Fold knob controls the amount of times the waveform is folded in on its self (indicated by the red led window below the knob). The C.V. knob below is an attenuator for incoming control voltage corresponding to the Fold jack(indicated by the red led window above the jack, it only responds to positive voltage). So, the Fold knob acts like an initial amount of folding depending on its position. For example, with the Fold knob fully clockwise you can get even more folds with a control voltage in at the Fold jack. The Offset knob controls how much positive DC voltage(0 to 5v, clockwise) or negative(0 to -5v counter clockwise) DC voltage(indicated by the led window above the Offset jack, red for positive, yellow for negative) injected into the waveform via the Symmetry knob. With the Offset knob position at noon(0v) there will little effect from the Symmetry knob. The Offset jack is expecting +5v to -5v with knob position at noon to scan through the positive and negative voltage. The Symmetry knob controls the amount of negative or positive offset voltage(dependent on the Offset knob) mixed with the waveform(indicated by the yellow led window above the Symmetry jack). If positive voltage is mixed with incoming waveform more folds will occur on the positive troughs of the waveform, likewise, when negative voltage is introduced more folds happen on the negative troughs. This part of the circuit can also be broken down by thinking of the Offset as a voltage controlled crossfader swinging between positive and negative voltages into a VCA controlled by the Symmetry knob and jack. When a voltage is present at the Symmetry jack the Symmetry knob becomes an attenuator. The Symmetry jack only responds to positive voltage.

Width: 4hp
Panel Material: Double Sided PCB panel with Classic and Soulless
Reverse Power Protected
Current Consumption: +12v: 40mA, -12v: 35mA
Depth: 47mm or 1.75"
All through-hole build
Ships with M3 black nylon screws
Expandable: No

Notes: The Morphor Plectrum - Analogue BBD Pluck is the successor of Morphor's successful module. Now only 8 HP instead of 10 HP with additional CV-able feedback!

Plectrum is a high quality, fully analogue Eurorack module that can produce plucked string-like sounds. It is a compact all-in-one solution for generating amazing bass, acoustic guitar, percussion and other amazing sounds.

The module is based on the Karplus-Strong principle with a true analog audio path built with an authentic bucket brigade delay (BBD) circuit which is recognizable by its specific timbre. By using carefully chosen high quality components, this module has a rich, warm analogue sound.

Now being only 8 HP in width, you won't need a lot of space to get going and start creating some incredible sounds. If you're looking to fully sculpt the string-like sound, you can extend the internal Karplus-Strong loop by breaking out the signal and adding external modules like filters and/or FX modules to it.

Features

100% analogue
Karplus-Strong principle
Built with classic BBD chip
Break-out BBD loop
Internal/external loop switch
Trigger input
1V/oct input
Tune knob
Pitch modulation CV input
Feedback CV input
Colour CV input (i.e. internal loop LPF cut-off frequency)
Mono output

Specifications

Panel width: 8 HP
Panel height: 3 U
Module depth: 40 mm
Current draw: 12V : 40 mA | -12V : 40 mA | +5V : 0 mA
Dimensions: 128.5 x 40.3 x 40 mm
Weight: 259 g
Frequency Range: sub-audio range to roughly 800 Hz
Power Socket: 16-pin

Notes: Pikoloops is Manecolabs' take on the Pkocore, developed by InfiniteDigits.

Main features:

A lo-fi music mangler based on the Raspberry Pi Pico .
Capable of holding 8 minutes of 8-bit 33 kHz monophonic samples.
Tempo-synced with a selectable BPM between 60 and 300, with samples mangled by beat-synced effects (stutter, retrig, gate, tunneling).
Loaded with real-time effects like a resonant filter, timestretching, volume, and wavefolding.
Sequenced with a 128-step sequencer with recording/playback
Saved and loaded via EEPROM for instant patch recall.
Able to load custom firmware, new samples, all through USB-C.
Sync-compatible with eurorack devices.
12HP eurorack module

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Six segment generator. Looping or one shot envelope generator. Chainable, so it can be expanded to link multiple units.

An exact hardware replica of the Mutable Instruments Stages.

Dimensions
14 HP
25 mm deep

Current Draw
80 mA +12V
20 mA -12V
0 mA 5V

Notes: ***B-STOCK: Dent on the side, product in perfect working order***


This long-awaited FM voice module from Jomox is a self-contained synth in Eurorack format, patchable and compatible with other modules but capable of creating eight-voice polyphonic patches all on its own. Vastly powerful.

Supplier's Notes:
The Mod FM is a completely self-contained 8 voice FM synth in eurorack format, which can create powerful sounds out of the box without lacking the commonly provided CV modulation possibilities.

It provides 4 Operators and 2 LFOs/VCOs per voice. Additionally it has 2 analogue filters and analogue VCAs per voice which apply analogue warmth and depth to the Mod FM, although the FM engine is digital of course.

Each voice has own CV/Gate inputs and an individual output. There is a mix output which separates even and odd voices. Here you can mix internal effects like delay and reverb to the stereo output signal.

Next to the CV/Gate control, the Mod FM has Midi in and out in TRS type A format and a USB C connector which handles Midi too.

Even without diving too much into complicated modular setups you can create extremely good sounding and metallic FM sounds, snappy bases but also soft and deep sounding analogue style sounds.

Furthermore, the Mod FM offers a variety of external cv modulations in order to e.g. modulate each operator individually or control the FM envelopes.

The Mod FM is fully multitimbral, i.e. each voice can play an own sound in Multi Mode which gets stored as a complete multi set (not only vectorized). That is, you can copy a single sound to the desired multi, but editings made on that particular multi get stored along with the multi set.

Hence, we have the biggest advantage of the hybrid approach:

Modular is great but can be very complex, and you might be trapped in a system where you never reach again the desired sound of the latest session. Storability certainly helps.

The different sections in more detail:

Matrix FM:

4 operators are arranged in a matrix, in which every operator (= sine oscillator) can be modulated by each one of the other three.

The 16 endless potentiometers of the matrix adjust the modulation amount (FM amt) and the base frequency of the operators.

For each operator you can change the base frequency by the diagonal knobs.

There are several overtone modes that determine if one operator is controlled by the keynote (or CV) = base operator, or if it's locked in as overtone (= overtone operator) to the assigned base operator. For the base operator, the number resembles xxx semitones added to the keynote.

For the overtone operator, the adjusted number is the xxx = Nth overtone or harmonics to the base operator frequency.

The locked overtone operator tracks the base operator and is still able to modulate and being modulated.

Each operator has an ADSR envelope. This envelope can also be used to frequency-modulate the operator.

Algorithm:

The algorithms from the known FM synthesis are actually special cases to the whole matrix.

Because it gets pretty quickly uncontrollable if you turn all the knobs because of the feedbacks, Jomox have decided to implement the algorithms. There are 26 algorithms, that are derived from the DX9 with its 4 operators.

At this menu it's even possible to change the frequency mode of each operator to a fixed frequency that is edited in single Hz and which does not follow the keynote, but only modulation. That makes sense for e.g. percussive sounds.

LFO/VCO:

Each voice has 2 LFOs which can modulate either the frequency (FM) or the amplitude (AM) of an operator. Every LFO addresses 64 different wave forms that are displayed in the right OLED display.

There is another feature: each LFO can be switched into a VCO that covers the whole audio range. You can even mix it into the signal chain and it tracks to the keynote. The former LFO rate parameter turns into a detune parameter. That is, you can create classic sounding rectangle/sawtooth analogue basses or string pads - and much more of course.

Filter:

Each voice contains an analogue filter which is build up with the chip SSI2140 from Sound Semiconductor, which is an improved modern version of the old SSM2040, designed by Dave Rossum, and which had been used in Oberheim synths and the early SCI Prophet-5.

The filter has a classic 24dB output and a 12dB state-variable multimode-filter. The three basic characteristic outputs LP/BP/HP can be cross-faded continuously with one parameter called shape.

Both filter outputs 24dB/12dB can be mixed independently.

The ADSR for the filter is fast and cuts in very quick and directly, the resonance is well adjustable.

The filter section contains an own LFO for the cutoff which is independent from the digital sound engine and has also 64 waveforms.

The VCA is a fast transistor-VCA which is important for snappy sounds. The same transistor-VCA is used in all Jomox drum products. Therefore the ModFM can be used as a rich source for technoid drums and percussions of any kind.

Notes: The Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.

This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.

The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.

Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.

If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The Morphor Mixer - 5 Channel Amplifier is a flexible analogue mixer module that can find a home in every type of Eurorack setup.

Each of the five channels feature an attenuator knob and mute switch to allow for instant playability, for example in live settings.

Input signals can be AC or DC-coupled depending on your preferred setting.

The output stage also features an extra attenuation/gain stage that allows you to double the mixed signal. An additional master mute switch, clipping LED are nice-to-haves that complete this intuitive mixer module.

Weight: 102 g
Dimensions: 128.5 × 40.3 × 30 mm
Width: 8 HP

Notes: Originally designed as a percussion voice, the Incus Iteritas Alia also lends itself well to FM synth sounds, combining deep internal modulation with user-friendly front panel controls.

Supplier's Notes:
Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Incus Iteritas Alia

FM-based wave-mangling additive voice for synthetic percussion and instruments on a swappable oscillator platform

Incus Iteritas Alia is a new member of the Iteritas family, hammering big and bold sounds into your patches. Incus started as a percussion voice, and evolved into so much more: create kicks for any genre, snares, and metallic hits, or go melodic and create FM plucks, analogue-style basslines, and so much more. Incus uses a combination of waveshaping, saturation, wavefolding, FM, and additive synthesis, plus a slew of internal modulation, all behind easy-to-use parameters perfect for jamming.

IIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Incus Iteritas Alia

FM-based wave-mangling additive voice for synthetic percussion and instruments on a swappable oscillator platform

Incus Iteritas Alia is a new member of the Iteritas family, hammering big and bold sounds into your patches. Incus started as a percussion voice, and evolved into so much more: create kicks for any genre, snares, and metallic hits, or go melodic and create FM plucks, analogue-style basslines, and so much more. Incus uses a combination of waveshaping, saturation, wavefolding, FM, and additive synthesis, plus a slew of internal modulation, all behind easy-to-use parameters perfect for jamming.

IIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Proudly digital oscillator inspired by the last millennium on a swappable oscillator platform.

Ataraxic Iteritas Alia is a voltage-controlled and proudly digital oscillator based roughly on the original Ataraxic Translatron. Now brought to the Alia platform and beefed up with a suboscillator and performable hold button, it's back and ready to make some killer basslines or glitchy madness. Sound starts with waveshaped bit tables that are amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Ataraxic is ripe for sound design and exploration: a wide range of bright, digital timbres are readily available, and tuning below audio rates creates wonderfully unexpected textures. Guaranteed to make the fax machine jealous.

AIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Ataraxic Iteritas Alia

Proudly digital oscillator inspired by the last millennium on a swappable oscillator platform

Ataraxic Iteritas Alia is a voltage-controlled and proudly digital oscillator based roughly on the original Ataraxic Translatron. Now brought to the Alia platform and beefed up with a suboscillator and performable hold button, it's back and ready to make some killer basslines or glitchy madness. Sound starts with waveshaped bit tables that are amplitude modulated, folded, and distorted by the CV-controllable front panel controls. Ataraxic is ripe for sound design and exploration: a wide range of bright, digital timbres are readily available, and tuning below audio rates creates wonderfully unexpected textures. Guaranteed to make the fax machine jealous.

AIA is available on our 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: Alia is a 10HP oscillator platform much like the Versio and Legio platforms. Launched in 2023 with a reboot of the beloved Basimilus Iteritas and Manis Iteritas, along with a new oscillator, Debel Iteritas, Noise Engineering is back with three more firmwares for the platform.

Separate hardware is available for each module, and a customer with any Alia module can try any firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable.

Cursus Iteritas Alia

Dynamically generated wavetable oscillator using orthogonal functions on a swappable oscillator platform

Cursus Iteritas Alia is Noise Engineering's take on a wavetable-inspired additive oscillator. Cursus creates sounds from a dynamically generated wavetable, then gives the user spectral controls to sculpt and modulate. Cursus has three different algorithms, based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. All that math is hidden behind a set of friendly controls that produces an extremely wide variety of harmonic sounds, perfect for melodic sound design. Cursus has long been regarded as the gentlest Iteritas, but if you need some beef and extra low end, try mixing the suboscillator output into your patch.

CIA is available on Noise Engineering's 10HP Alia oscillator platform. Buy an Alia module and use the included USB cable to connect to the Noise Engineering Customer Portal and check out any other Alia firmware, free of charge, any time.

Width: 10HP
Depth: 22mm

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Oof. Frap casually serve up one of the best filters we've seen in a long time. Quad multimode circuits with saturation and feedback give you extensive routing options. Delicious.

Supplier's Notes:
cunsa /'cu?nsa/ s.f. [dialect of Modena of uncertain etymology, probably from a Latin *comptiare, derived from comptus, participle of comere 'organize,' 'decorate'] i curing, seasoning (of foods), tanning (of leathers).

Seasoning is crucial for cooking. It is a process that enhances the flavors, glues the ingredients together, and even adds some unexpected kick.

From a gentle refining touch to a shovelful of spice, CUNSA is the perfect seasoning tool for your patches. It can sweeten a sour lead or beef up an insipid bass line, and anything in between.

And, just like a good oil, you can even taste it by itself!

CUNSA is a quadruple analog pingable multimode resonant filter, saturator, mixer, and oscillator.

It is Frap Tools' sound seasoning tool: it can gently even a patch, applying a final touch, or it can set it on fire with a ridiculous amount of spice. It's up to you and your cooking style!

It consists of four multimode resonant filters with a custom saturation and feedback control that you can use independently or in various combinations and roles thanks to a series of seminormalizations.

Four Analogue Resonant Multimode Filters

CUNSA features four state-variable filters that can be used independently or linked and mixed. Each filter provides three behaviors simultaneously: lowpass, bandpass, and highpass. Each behavior has a 12 dB/oct slope, except for the lowpass, which can be either 12 or 24 dB/oct.

Unique 'Character' Circuit for Feedback and Distortion

CUNSA handles feedback and gain staging with extreme control and versatility. Besides the usual Q control that emphasizes the cutoff frequency, the Character circuit defines the amount of soft clipping when the filter overloads. High clipping guarantees a controlled behavior with fat tone and pure resonance, while low or no clipping lets the signal saturate the filter stages and make it scream.

V/oct Tracking and Quadruple Oscillator

Each filter responds to the V/oct signal with excellent tracking. It is thus possible to move the cutoff frequency along with the main melody or make CUNSA resonate with no input and transform it into a multiple oscillator. The V/oct inputs are seminormalled so you can control more filters with the same CV. Easy chords stabs!

Ping and Ring

CUNSA is ideal for percussive and organic tones. The Ping circuit offers a behavior similar to the BRENSO but AC-coupled. Instead of shooting the frequency to the moon with any trig, CUNSA gently responds to different incoming gates with a selectable decay curve. The Ping circuit can thus create natural decay sounds when fed with trigs or smoother envelopes with any other voltage, like a linear integrator with a custom decay.

Besides this, you can also feed the filter's audio input with trigs and make it ring at high Q settings.

Linked or Individual Filtering

The four filters can work independently or arranged in groups through seminormalled inputs and sum outputs. CUNSA can thus be a 4×1, 2×2, or a massive 1×4 filter. Even odd configurations are possible, like 1+2+1 or 3+1. Mono, stereo, or quadraphonic audio is at your fingertips.

Filter and Combo Behaviour

When the filter behavior is set to COMBINED, every control of the cutoff frequency also affects the input VCA, reducing the signal amplitude and saturation as it approaches the lowest range. It can make organic decays with the ping circuit or tame the low range at high Q and Character settings.

Four Seminormalizations for Group Use

Four inputs have a cascaded seminormalization: audio inputs, VCA CV, V/oct, and Ping. Every signal patched to a filter will thus feed also those at its right, making simultaneous use even simpler. To remove a seminormalization, simply patch a dummy cable to the corresponding input.

Analog Mixing Stage and Group Outputs

Every filter output can be routed to an analogue mix bus that sums the four filters and outputs them in three combinations: all, 1+2, and 3+4. These outputs allow for versatile audio processing. Just like we did with FUMANA, we added a gentle shelving EQ for the higher frequencies of the All output to provide additional timbral variety.

CV Inputs with Attenuators

Besides the seminormalled inputs, every filter features additional CV inputs for cutoff frequency, Q, and Character, each with a dedicated attenuverter.

Notes: Need an offset voltage? Of course you do, you probably need one all the time, and you can never seem to find one. Well, here's two.

Yes, the Stereo Offset boasts not one but TWO linked offset voltages, and even better, they can be independently set as unipolar or bipolar with jumpers on the back of the module. To further aid your adventure in offsetting, bicolor LEDs will indicate the current state of both outputs.

Smoothly transition between voltages to simultaneously control other functions in your system, either by applying identical voltages to two different places, or by using simultaneous unipolar and bipolar signals for advanced control over your Eurorack system.

Do the right thing - get an offset generator you will love.

Dimensions: 2 HP

Notes: Dual Full Wave Rectification for Fun and Profit

Are you sick and tired of having pesky negative waveforms interfering with your signals? Do you detest seeing the back-and-forth motion of AC waveforms going backwards, then forwards? Those days are OVER with the Herzlich Labs FWR, a dual full-wave rectifier that puts an end to negative waveforms!

When you plug a signal into the FWR, you get two outputs in return, which have fully rectified the input. All negative inputs will be kindly returned to you in pristine, fully positive form. Beautiful bouncy sine waves, turned into pure "Oops! All Positive Waveshapes"-cereal, just the way you like it.

Use it anywhere where you want ONLY positive vibes, or use it with an inverter to get ONLY negative signals, if you please. Yes, you get two of these functions in just 2hp!

Dimensions: 2 HP

Notes: Drawing inspiration from the MMI Maxima, the MMI Helios is intended as a middle ground between the gestural control surface of the Maxima and the fingertip control of the smaller MMI.

Less density, but a much higher degree of patch control is the key point of the Helios, which complements other MMI devices very well, and can be joined with other Helios (Helii?) to form larger and creative control surfaces.

The design is greatly simplified compared to the original MMI, with only two I/O jacks - either can function as input and output, and their interaction with each other is determined by touching both plates simultaneously to form a connection, or in cooperation with other MMI devices.

Available in a "right" and "left" version - one is an exact mirror image of the other, which makes it suitable for having two units adjacent to one another.

Dimensions: 8 HP

***Please note: the "righthand" version is not included, it is shown in the picture for demonstration purposes only. ***

Notes: SkipLog, a probability processor with sequence capturing and looping features, along a range of other versatile functions waiting to be explored.

SkipLog is a 3-channel rhythmic probability processor designed for inventive rhythmic exploration in modular setups. Introduce unpredictable rhythmic possibilitis to your creative flow.
SkipLog's basic operation is simple: when a trigger or gate is received at one of its three channels' inputs, the same channel’s Probability knob allows you to control the likelihood of these triggers or gates reaching the output. This inputs are internally connected .

SkipLog continuously captures the binary outcomes of its use, storing them for potential sequences. Activate the Loop function to break from pattern creation and loop the recorded sequences. Individual Loop Length knobs for each channel allow adjustment of the loop sizefrom 1 to 16 or 32 steps (as selected on the back), providing evolving rhythmic patterns.

To fine-tune your arrangement, SkipLog introduces functions like Mute for real-time channel silencing, Inv for signal inversion, and Choke for establishing channel priorities. Lastly, the G/T (Gate/Trigger) Mode enables users to specify whether the channel output is a gate or a trigger.

Dimensions
8 HP
33 mm deep

Current Draw
100 mA +12V
22 mA -12V

Notes: An ultra-compact 10HP VC filter with bags of personality. Camber can be treated as a subtle, non-intrusive sound design tool, or something much more lively.

Camber is designed to be a fun, tactile filter with a small footprint. It's sound is neutral enough for basic filtering without a fuss, with a much more aggressive tone available using high resonance settings in three-pole mode.

Filter Core

The core of the filter is based on a state variable topology using 2164 VCAs and 1% tolerance integrating capacitors. Resonance and feedback control is provided by the fantastic circuit design originally by Neil Johnson "Voltage Controlled 3-Pole State Variable Filter" recently made available in Sound Semiconductor documentation.

Operation

Camber is switchable between low pass and high pass responses with one pole (6dB) and three pole (18dB) flavours of each. It has full CV control of both cutoff frequency and resonance amount. The input is DC-coupled allowing LFO and CV signals to be routed through the filter. The filter will also act as a simple oscillator producing a clean sinusoidal signal with the resonance control turned *almost fully clockwise, and no signal at the audio input. Dialling in the resonance so that it is just under the point of self-oscillation allows the filter to be "Pinged" by sending gate signals to the audio input. This is useful for tuned percussion sounds and FX.

Specifications

Intellijel 1u format
Width 10HP
Depth 33mm
Power requirements ~40mA +12V/~40mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K

Notes: Tilt is the first in Laine's series of core modules, which will take cues from the main product line and strip back the features so both the module width and cost can be shrunk dramatically.

Comprising an 'Ambler' style tilt EQ network similar to the 'Stilts' topology, Tilt allows simultaneous cut and boost of low and high frequencies using a single control.

Tilt control circuits are known for the transparency of their cut and boost curves, coupled with the inherent emphasis gained from cutting one end of the frequency spectrum whilst boosting at the opposite end.

It sounds pretty good on all audio source material but is especially suited to tracking drums, guitar and lead, or manipulating effects sends and returns.

With the control knob at 12o'clock the sound passed is neutral. Turning the control knob clockwise will boost high and cut low frequencies pivoting from a fixed mid-range point. Turning the control anti-clockwise below 12 o clock will in turn boost low frequencies and cut the highs.

In addition to the EQ there is a soft clipping network which will begin to saturate signals over 15 volts peak to peak.

Tilt uses the same high quality OPA op amps, Alpha pots and ENIG PCBs as found in our main product line.

Features

Compact EQ tilt control in 1U
Soft clipping network
High-quality components used throughout

Specifications

Intellijel 1U format
Width 8HP
Depth 28mm
Power requirements ~10mA +12V/~10mA -12V
Impedance Input 100k / Output 1k

Notes: The MMI Maxima is the final word in MMI technology. Beautiful gold patterns form gradients of touch sensitive surface areas, each connected to an input/output. Drag, rub, pinch or tap your fingers across to form connections, and create evocative and unique performances. Utilize the various pattern densities and shapes in your performance, or create installations with whatever conductive material is to hand.

Operation is easy: simply plug any audio, LFO, CV, trigger, gate, offset or clock into any of the inputs on the front panel, and connect one or several outputs to destinations in your system. The symbols near the sockets correspond to the shapes on the panel, and all that remains is for you to form the connection between the desired symbols with your hand, or any other conductive object you may have. Connect multiple at the same time to achieve liquid, gradual mixing, evolving rhythmic patterns, mixed LFOs and more. Furthermore, touch the pressure plates more firmly or in more dense areas to form stronger connections - in practice, this means a signal will pass with more or less intensity, based on the pressure you apply.

There are countless possibilities here: the shapes make it easy to memorize your patch, and the many inputs and outputs allow for enormous creativity. Eight inputs and one output? No problem. Maybe you want eight outputs sharing one input? Also no problem. Why not patch in an offset voltage, and then use the pressure sensitivity to sweep a filter with the offset patched into the filter resonance CV control? Or maybe create volume swells by patching audio into a VCA, or even an effect, for reverb or delay swells. Maybe you want to create chords, crescendos or chaotic and swiftly changing drum patterns?

Although practice helps, there are no rules for playing the MMI Maxima. Use it upside down or downside up, rack it, tape it to your body or drill it into your guitar and use it with the expression input on your pedals (yes, this is actually possible. Seriously.) With no external power needed, it makes an excellent performance companion for any system, big or small, modular, semi-modular or even not-modular-at-all.

Intended as a controller for musicians and non-musicians alike, the purpose of the MMI Maxima is to put emphasis on your performance and expression, rather than your competence at the ivory keys or dexterity at a drum pad. Let your hands, slices of pickled cucumber or other conductive everyday objects do the talking, through a combination of clever patching and expressive play - with the MMI Maxima, you have a performance tool unlike any other at your disposal.

The MMI Maxima comes in a custom case, and does not require external power to operate. Enjoy the Maxima either as a standalone controller, or rack it in your system if you desire.

Dimensions
30 HP
30 mm deep

Current Draw
Module does not draw current

Notes: In recent years, stereo signal paths have increasingly found their way into the wonderful world of Eurorack synthesis - so naturally, utilities should follow suit. Introducing the Herzlich PSA, a simple solution to a problem you might not even realize you had. Far from just useful as an attenuator for audio sources in mixdowns, the PSA can also be used to bring audio down to more managable levels (such as line level), attenuate multiple signals simultaneously (like increasing the modulation depth of two LFO's at the same time! It's like having two hands, but with one hand!) and even function as a multiple: Attenuator 1 is normalled to Attenuator 2, so multing your stereo signal (or two mono signals) while attenuating the two signals individually is easy as pie.

There's not much else to say, except that it's passive, and draws no power - and it looks great!

Dimensions
4 HP

Current Draw
Module does not draw current

Notes: Beauty. Refinement. Attenuversion.

It's another Herzlich Labs release: the 2hp stereo Attenuverter. Two channels of connected attenuversion, allowing you to fully and smoothly invert any signals you plug in - turn negative to positive, turn phase to antiphase, and find all the variations in between.

With the usual pleasantly tactile sliding pot, the sAttenuverter is both performance friendly and inspiring to use. Extremely suitable for linked mono signals and stereo alike, it will feel right at home in the increasingly popular stereo setups in modular.

Dimension: 2 HP

Notes: Two bipolar LEDs allow you to visualize your voltages as they swing between positive and negative, as well as their level of intensity, without affecting the signal you input.

Think of it as a 1D oscilloscope in just 2hp! An easy way to grasp what your patch is currently doing, without sacrificing the money or space on more fully-fledged solutions. Useful as part of a patch to keep track of your oscillations, as a troubleshooting device to quickly verify that something is doing what it should be doing, or simply as a healthy dose of blinkenlights in addition to your existing array of sparkling LED pleasures. Best of all? You get two in just 2hp - you'll have to spend some serious cash to get that kind of function-per-hp density anywhere else!

Dimensions: 2 HP

Notes: Fade between two signals with the fader, just as nature intended

Do you have aspirations to smoothly fade between two signals? The Herzlich Crossfade lets you do exactly that, and exactly nothing else, using well-designed active circuitry and a smooth and performance friendly sliding potentiometer.

Whatever your aspirations are, this crossfader lets you live out your crossfading dreams in the simplest possible way, with not a fraction of an inch wasted on unnecessary features. Only delightful build quality and pleasantly smooth crossfading lies ahead for you.

Dimensions: 2 HP

Notes: Advanced generative sequencer featuring mutes per channel and transposition facilities.

Akropoli is an extension and enhancement of our successful Little Melody and High Towers modules, offering the features of both of these modules as well as some of it's own unique features such as mute buttons per channel, manual transpose knob and 1V/oct transpose CV input. Akropoli operates using Frequency Central's proprietary TOOL V2 code, and can count in integers as well as multiples for even more subtle and evolving variations.

Akropoli is a generative sequencer based around clock divisions and a chromatic quantiser, used to create in-the-moment licks and riffs. It is more that the sum of it's parts.

Akropoli's internal operations can be considered as 4 clock dividers patched into a CV mixer via attenuators. The attenuators select notes over a 5 octave range, the clock dividers determine how often those notes are added to the mix. The final output of Akropoli is quantized chromatically for fast set up and continuously pleasing results. Akropoli has an onboard transposition knob, as well as a 1V/oct transposition CV input.

The 4 clock dividers are labelled A, B, C, and D. They all receive clocks from the same source, the divisions may be selected using the presets and the individual division selectors. The clock dividers can be set to count up, down, or to one of a variety of modes that move between counting up and down. For further information on Presets and Modes see the Little Melody User Guide.

Additionally, each clock divider has it's own binary output (either high or low), these 4 outputs can be used to clock/gate/trigger other stuff on other modules to great effect.

Product Specifications

12V draw
50mA

-12V draw
36mA

5V draw
0mA

Depth
35mm

Notes: A unique analogue percussion module, based on principles from the legendary 909 twisted into new sonic territory. Capable of everything from classic kicks and snares to more experimental hits and complex VCO effects.

Supplier's Notes:
A machine is born

The Machine began as a quest to create a rich-sounding eurorack snare drum synthesis module to complement the existing Mutant Drums. The project quickly became too large and costly to justify the module being capable only of snare drum sounds. So, the decision was made to learn from the architecture of the TR-909's snare and kick circuits, in order to develop a module capable of generating multiple forms of analogue percussion, and various other effects.

Like the other Mutant Drums, the Machine has its roots in classic analogue percussion synthesis. Even though it can create totally alien sounds, it still has the capability to deliver those classic 909 house snares and kicks if you want them. There are no microcontrollers in the Machine. The signals and waveforms are all generated by discrete components and ICs, for a distinctly analogue sound, and user experience.

Features

Microcontroller-free analogue percussion synthesis engine
Unique Inverter Core oscillators form the MEMBRANE. Each analogue oscillator has three waveforms to select from
Capable of synthesizing everything from heavy-hitting bassdrums to classic 909-style snares and other complex timbres
Modular design gives the Machine many auxiliary purposes, great for modular sound design of many varieties, and not just percussion
The SNAPPY section is comprised of a voltage controlled noise oscillator, for modelling the noisy part of drum timbres
Both MEMBRANE and SNAPPY elements have an external input for replacing the built-in sound sources, opening up many avenues of possibility
13 control voltage and audio inputs, for a fully modular drum experience
7 audio and CV/gate outputs for maximum integration with other modules
Dedicated outputs for each WAVE and NOISE oscillator mean you can use the Machine as a complex VCO in your system, when not synthesizing percussion
Waveform scanning feature generates complex timbres from analog waveforms
The MEMBRANE's waveforms can be scanned through automatically by the wavescanner's voltage controlled clock generator, or an external clock or VCO can be used
SCAN FREQ CV forms a unique form of timbre control, making the Machine act like a complex oscillator at its WAVES output
The ENABLE input allows you to gate the wavescanner on and off with a CV or gate signal

Technical specifications

Width: 29HP | Depth: 30mm
Current draw: +139mA, -115mA @ 12V

Notes: The Morphor LFO - Dual is a slim (6 HP) dual LFO. Each channel features analogue triangle, square, sine, saw and inverted saw outputs and a cycle reset input.

Frequency ranges:

Low: 0.005 - 1.5 Hz
Med: 1.5 - 425 Hz
High: 15 - 4250 Hz

Features

100% analogue
Dual channel
Triangle wave output
Square wave output
Sine wave output
Saw output
Inverted saw output
Cycle reset input
Low/Med/High frequency selector

Specifications

Panel width: 6 HP
Panel height: 3 U
Module depth: 25 mm
Current draw: 12 V : 22 mA | -12 V : 22 mA | +5 V : 0 mA
Dimensions: 128.5 x 30.3 x 25 mm
Weight: 71 g
Power Socket : 10-pin

Notes: The Morphor Envelope - Dual ADSR is a slim (6 HP) dual envelope generator. Each channel features standard ADSR (Attack, Decay, Sustain, Release) analogue circuitry, providing the classic, rich envelope shaping tools essential for any modular enthusiast. It features separate control knobs for the attack, decay, sustain and release parameters, two independent channels for versatile envelope shaping and each channel comes equipped with gate, re-trigger, output, and an inverted output.

On the back of the module you can find tiny switches for each channel to change the overall length of the complete envelope:
Short: 5 ms - 30 s
Med: 25 ms - 60 s
Long: 60 ms - 200 s (=3.3 min)

Features

100% analogue
Dual channel
Attack length control
Decay length control
Sustain level control
Release length control
Inverted output
Re-trigger

Specifications

Panel width: 6 HP
Panel height: 3 U
Module depth: 40 mm
Current draw: 12 V : 32 mA | -12 V : 32 mA | +5 V : 0 mA
Dimensions: 128.5 x 30.3 x 40 mm
Weight: 111 g
Power Socket : 16-pin

Notes: 3xMIA is a 6-channel attenuverting mixer/offset/scale/polarizer

3 blocks of 2-channel attenuverting mixers, using dual concentric pots. Each channel can be switched to mix with the subsequent channel, allowing for 2-2-2, 4-2, 6 mix configurations.

With nothing plugged into an input, an offset is normalled to that channel. The inner knobs control the A inputs, while the outer knobs control the B inputs.

DC coupled, so it can be used for audio, CV, or both at the same time.

80 mA +12V
80 mA -12V
35 mm Depth
24HP wide

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


The Herzlich 4x4 Switched Passive Matrix Mixer is a fresh dose of hot old school synth flavor right into your signal chain - inspired by the Buchla and Synthi matrix mixers of yore, the Herzlich 4x4 Passive Switched Matrix Mixer will give you all the joys of an old school matrix mixer, and none of the pesky conveniences of a modern one!

Looking for a super clean, powered matrix mixer that will treat your signals with velvet gloves and behave with mind-numbingly boring predictability? Then you've taken a wrong turn, and instead of finding the pristine tedium you sought, you have uncovered a sleeping beast, an uncut diamond the size of a bell pepper and an all-red rainbow all in one. No power needed, and a super slim profile for even the shallowest skiff user.

The Switched Passive Matrix Mixer will set your heart ablaze with its glorious commitment to happy accidents and unapologetic jank. With absolutely no electronics to rein in the monster that resides in its circuitry, you will be delighted and shocked as you turn the knobs and click the switches, to find channels that bleed gently into each other, pots that alter channels other than their own, and switches that may take your desire to open and close them as suggestions rather than commands.

You'll think you've fallen asleep in the pale glow of your DAW and awoken to a nightmare at first, but very soon, you will discover it is a creative dream. Step into the shoes of the composers of yesteryear, and discover how your unintended accidents mixing CV or audio turn into beautiful and unexpected compositions. Find beauty in the strange interconnectedness of the switches and pots, as you try to brave and tame them. Reach synth transcendence with the psychedelic potential of passive matrix mixing, and open your heart to the multitudes of possibilities contained with the power of 70s circuit design.

Dimensions
20 HP
22 mm deep

Current Draw
Module does not draw current

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Expander module for the Tetrapad, Intellijel's multi-dimensional performance touch controller. Adds huge functionality, allowing you to sequence parameters and create complex modulation.

Supllier notes:
Tete is the long awaited and highly anticipated expander for the Tetrapad.

Some of the key features:

Three primary modes: VOLTAGES, NOTES and COMBO.

VOLTAGES mode:

Up to 16 voltage storage locations (grid) with 8 voltages stored at each location.

You have the choice to record and playback your recall of these locations in a looper style (just play freely and spend arbitrary amount of time at any location) or as a clocked sequence (SH-101 style). Additionally you can traverse the matrix using the X and Y CV inputs to get Cartesian style sequencing.

There is also variable slew that allows you to morph/glide between the values.

NOTES mode:

You can create sequences or loops in chord, scales or keyboard mode. The isomorphic keyboard grid can vary from 4 notes to 12 notes max. There are real-time performance looping, transposition and inversion capabilities via the CV inputs and dedicated loop button. In sequencer mode each step can be a tie, rest, or gate with size 25/50/75%. Basically we have created a way to very quickly and intuitively make chord sequences that are very musical and easy to manipulate. It is difficult to summarize in words but we will be sure to create some videos to demonstrate how easy and fun this is to play with. It definitely represents something unique in the landscape of Eurorack sequencers.

COMBO mode:

In this mode you can loop record your performance on any combination of the following functions:

fader, bipolar fader, drum hit, switch or LFO. Kind of like Elektron style parameter locking but all of the motions is recorded continuously instead of just in slices. Instantly turn a simple patch into a highly animated and complex beast.

With all of the above mentioned loop recording modes you can very easily overdub since the Tetrapad detects pressure/pressing. In combo mode you can erase individual channels.

All modes allow for internal or external clocking and configurable syncing.

All of the modes have special XYZ CV modulation assignments and make use of the dedicated CV outputs.

For example, in Looper mode one of the CV outputs generates a continuous ramp that represents the position in the loop. This can be used with devices like the Planar 2 in Interpolation mode to sync the recorded patterns together no matter what tempo.

Notes: Bartender? The power of gate signals at the touch of a button, please - but make mine a narrow one!

You already know what this is: it's a gate signal generator, and it generates gate signals. That's all there is to it. You press the button, the LED indicator lights up, and you get a 5v gate signal! Brilliant!

You get three, in just 2hp! That's 1 1/2 gate signal generators per hp! That's more than [competing product] from [competing brand]! You knew you made a good decision when you decided to look at this product.

All that remains now is to open your heart, and your wallet. Buy this gate generator - this version is the latching model (stays on or off after pressing). In fact, it works really well with the Quad Gate to Trigger Converter, also from Herzlich Labs - now you can generate both gates and triggers with ease! And in such little hp!

Oh, one more thing? Your friends are going to be very envious of this, when you show it off. Gold plated nuts, gold plated front panel, tastefully matte indicator LEDs, pleasantly tactile buttons, black hardware. All the details have received the closest care and attention.

Dimensions: 2 HP

Notes: Bartender? The power of gate signals at the touch of a button, please - but make mine a narrow one!

You already know what this is: it's a gate signal generator, and it generates gate signals. That's all there is to it. You press the button, the LED indicator lights up, and you get a 5v gate signal! Brilliant!

You get three, in just 2hp! That's 1 1/2 gate signal generators per hp! That's more than [competing product] from [competing brand]! You knew you made a good decision when you decided to look at this product.

All that remains now is to open your heart, and your wallet. Buy this gate generator - this is the momentary model (is normally off, and temporarily on when you press it). In fact, this also works really well with the Quad Gate to Trigger Converter, also from Herzlich Labs - now you can generate both gates and triggers with ease! And in such little hp!

Oh, one more thing? Your friends are going to be very envious of this, when you show it off. Gold plated nuts, gold plated front panel, tastefully matte indicator LEDs, pleasantly tactile buttons, black hardware. All the details have received the closest care and attention.

Dimensions: 2 HP

Notes: This is an expander for Bartender and Barback, enabling CV control of the level of the send bus of up to 8 channels.

Each section of four jacks has a cable to connect to the mixer modules. To get 4 channels to work with Barback you want to connect it to the last Barback in the chain of two. It will then pass along channels 3 & 4 to the next Barback.

Dimensions
2 HP

Current Draw
Module does not draw current

Notes: Two channel USB module.

Standard Mode - Send two channels into your USB device and receive two channels from USB.

Insert Mode - Send two channels to your USB device and get a copy of the sent signal in the outputs.

Toggle between the modes via a pair of jumpers on the back. The USB-B to USB-A cable is provided with the module. Why use the cutting edge USB-B? I felt the jacks were way more sturdy than mounting USB-C jacks vertically.

Expandable - Bartender, Barbacks, DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 4HP
12V: 10mA
-12V: 10mA

Notes: Dual three channel voltage controlled panning mixer

Mixer section

Channel 1 and Channel 2 are three channel mixers with potentiometers to control level of three different inputs for each channel. Each channel then has a potentiometer to control panning as well as CV control for panning and level control

Panning and VCA

The VC panners are equal loudness panning and the VCAs for each channel are linear response.

Built-in LFO

There is a built-in LFO that is normalled to the panning CV input of each channel. CH1 gets the standard LFO and CH2 gets an inverse, enabling alternating channel panning. The default is to use a TRI wave for the LFO, but there is a jumper on the back to switch it to SQU.

Width: 12hp
12V: 140mA
-12V: 120mA

Notes: A simple VC panner with CV-controlled level. The left input normals to the right input to give an easy way to add panning to a mono signal.

Expandable

Bartender, Barbacks, DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 4hp
12V: 40mA
-12V: 40mA

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

6HP Eurorack
+12v: 140mA
-12v: 22mA
Sinc - from Latin: "treasure"

Legio - from Latin: "legion, army"

"A lot of treasure"

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

Notes: Expander for the DROID with 4 pots and 2 buttons

The P4B2 controller provides 4 potentiometers and 2 push buttons for free assignment to any of the DROID's parameters.

Each potentiometer outputs a value between 0 and 1 and can be used for controlling every aspect of the functions of your DROID patch (configuration), such as the speed or depth of an LFO, the pitch of a sequencer step, all aspects of an envelope, clock division and multiplication and much much more.

The buttons can be used as momentary or toggle buttons, if you like with three or four states. Or you can group several buttons together so that they work like "radio buttons". Buttons can be used for various tasks like switching between different behaviours, selecting wave forms, switching steps of a step sequencer, changing the root or scale of a quantizer or chord generator and much more. Also you can use buttons for overlaying a single pots with multiple switchable functions.

You can attach up to 16 controllers to one DROID master. This is done with a 6 pin ribbon cable. This module gets its power from the DROID master.

Besides the P4B2 there are many other types of controllers for the DROID.

Dimensions
5 HP
25 mm deep

Current Draw
11 mA +12V
0 mA -12V
0 mA 5V

Notes: TRS Split - CV/Audio signal distributor

TRS Split is a multipurpose CV and audio signal distribution module. It has three 3.5 mm TRS (tip/ring/sleeve - stereo) jacks and six ordinary 3.5 mm mono jacks.

It contains 3 identical sections set up as following:

Upper jack carries the tip signal
Middle jack carries the stereo/dual signal
Lower jack carries the ring signal

Each section can either split a stereo signal into two mono signals or join two mono signals into one stereo signal. The module does not have any active components and does not need a power supply.

Use cases:

When you plug a stereo signal carried by a stereo (TRS) cable into the middle jack, you receive two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. That way you can attack an "AUX" cable such as from your smartphone to your modular.

Or the other way around: Send two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. Receive a stereo signal at the middle jack to be used with a stereo (TRS) cable.

Converting from stereo to dual mono and back allows you to alter the two sides of a stereo signal with different effects/filters.

Some tuners such as the Korg NTS-2 accept inputs to tune two oscillators combined in one 3.5 mm stereo jack. With one splitter you can easily feed two VCO signals into such a tuner.

Switching sides

Two splitters can be used to switch tip and ring (left and right): Plug in a stereo cable in the middle jack of the first section. Connect mono cables to the upper and lower jack of the first section. Then connect the upper mono cable of the first section to the lower mono jack of the second section and the lower mono cable of the first section to the upper mono jack of the second section. The signals are switched. Plug a stereo cable in the middle of the second splitter and you're good to go.

Hint: This also works for MIDI signals. If you use MIDI over minijack, there are two standards A and B - some manufacturers use A some B - thus not all connections are working. Now you can easily switch between the standards using the TRS Split.

Note: The MIDI input of the DROID X7 automatically detects A and B, so there is no switching necessary. The MIDI output of the X7 can be set to A or B with a switch on the back of the module.

Stereo multiple setup

If you have a separate multiple in your modular, you can use the TRS-SPLIT to create a 1:2 stereo multiple as follows:

Plug a stereo cable in the middle jack of section 1, patch the mono cable from the upper jack into section 1 of your multiple (e.g. a 3/3/3 multiple) and feed two of the outputs back into the upper jacks of section 2 and 3. Do the same with the mono cable coming from the lower jack of section 1 going into the second section of a 3/3/3 multiple and patch two cables back into the lower jacks of section 2 and 3 of the TRS Split. Now the middle jacks of section 2 and 3 both carry the stereo signal.

Dimensions
2 HP
22 mm deep

Current Draw
Module does not draw current

Notes: TRS Tool - Stereo/Dual CV/Audio/MIDI signal multipurpose module

TRS Tool is a multipurpose CV and audio signal distribution module for working with 3.5 mm stereo jacks (tip/ring/sleeve). These jacks are common for stereo audio but also for MIDI.

The TRS TOOL has no active components and does not need a power supply. It contains 3 different sections set up as following from top to bottom:

TRS Split
The upper jack carries the tip signal
The middle jack carries the stereo/dual signal
The Lower jack carries the ring signal

Use cases:

When you plug a stereo signal carried by a stereo (TRS) cable into the middle jack, you receive two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. That way you can attack an "AUX" cable such as from your smartphone to your modular.

Or the other way around: Send two separate mono signals by plugging in a mono (TS) cable in the upper jack to carry the left signal and a mono (TS) cable in the lower jack to carry the right signal. Receive a stereo signal at the middle jack to be used with a stereo (TRS) cable.

Converting from stereo to dual mono and back allows you to alter the two sides of a stereo signal with different effects/filters.

Some tuners such as the Korg NTS-2 accept inputs to tune two oscillators combined in one 3.5 mm stereo jack. With one splitter you can easily feed two VCO signals into such a tuner.

TRS Quad Multiple

Multiply a stereo signal. Four TRS jacks to be used with stereo minijack cables.

Use cases:

You could use this to multiply the signal for headphones - listen to patches together.

Or create sends - route one (or two) stereo signals to effects and use the third one as dry signal going to the mixer.

Experimental: multiply a MIDI signal to two or three receivers: NOTE: depending on the output power of the MIDI sender and the power draw of the MIDI receivers this might or might not work. MIDI uses a current of typically 5 mA instead of voltage levels for data transmission. So when you attach too many devices to one output the current might not be enough to drive all of them. So this is strictly spoken not covered by the MIDI standard, but might work anyway.

A/B Swapper
The bottom section of the module consists of two connected TRS jacks.
Whatever signal applies to the tip in jack A will be routed to the ring in jack B.
Whatever signal applies to the ring in jack A will be routed to the tip in jack B.

Use cases:

Switch the left and right side of a stereo audio signal.

Switch between MIDI standard A and B: If you use MIDI over minijack, there's two standards A and B - some manufacturers use A some B - thus not all connections are working. Now you can easily switch between the standards using the TRS Split.

Note: The MIDI input of the DROID X7 automatically detects A and B, so there is no switching necessary. The MIDI output of the X7 can be set to A or B with a switch on the back of the module.

Dimensions
2 HP
22 mm deep

Current Draw
Module does not draw current

Notes: Saturation is a sound designer's best friend. As applying saturation to a sound can make it sound warm, rich and defined. But without any other processing the opposite can happen; making the sound harsh, destroyed and undefined. An often used technique in music production is to saturate specific parts of the spectrum, adding harmonics to enrich the sound but not lose its original quality.

Wyvern takes this technique and makes it a creative sound design tool. When deconstructed Wyvern is built out of a specific chain: Filter EQ, Saturation, VCA, Dual Filter, Dry/Wet Balance. Different combinations of these stages can be used for a variety of sound design and patch situations. And it is all in stereo, so you can apply it to your final mix and stereo signals with ease too!

The Filter EQ stage has a high-shelf, low-shelf and bell curve to boost or diminish parts of the spectrum. When the gain is set to a minimum the EQ curves turn into low-pass, high-pass and notch respectively. A Resonance control puts emphasis on a certain frequency, or it can be used to make Wyvern scream. This is then sent to a Saturation stage. The Drive control sets the amount of Saturation of one of the three

Saturation types

Soft clipping puts more emphasis on the third harmonic and compresses the sound.

Hard clipping puts emphasis on odd harmonics. Finally an Allpass distortion adds phase shifts and distortion. The Saturation stage also has a level control which can be used to decrease the gain after saturation is applied and can function as a unipolar VCA. The Saturation stage is also accompanied with a clip indicator led and a boost switch to scale input signal correctly or simply add more or less harmonics.

The Post-Saturation stage is a high-pass and low-pass combo. Allowing you to select a frequency band from the previous stages. Along with a balance control to adjust the balance between the dry and wet signal.

Whether you are looking to destroy your sound or go for subtle analogue warmth; Wyvern has got you covered. Even when not used for saturation alone. It can be a Stereo Tone Controller, EQ, Filter, VCA and Phaser, all and anything in between. Making it a very fun and powerful sound design tool!

Features

- Filter EQ with Low-shelf, High-shelf, Bell, Low-pass, High-pass and Notch curves.
- Resonance to add emphasis on a frequency or to make it scream.
- Soft clipping, Hard clipping and Allpass distortion for a variety of flavors.
- Boost switch and clip indicator led to set Saturation scale.
- Level and VCA to adjust level while Saturation amount remains the same.
- High-pass and Low-pass combo to select a part of the spectrum.
- Dry/wet control to dial in the right amount of processed signal.
- Gain with increased and adjustable center detent position.
- V/oct tracking with temperature compensation.

165mA @ +12V // 150mA @ -12V

Notes: In recent years, stereo signal paths have increasingly found their way into the wonderful world of Eurorack synthesis - so naturally, utilities should follow suit. Introducing psATT, a simple solution to a problem you might not even realise you had. Far from just useful as an attenuator for audio sources in mixdowns, the psATT can also be used to bring stereo audio signals down to more manageable levels (such as line level), attenuate multiple signals simultaneously (like increasing the modulation depth of two LFO's at the same time! It's like having two hands, but with one hand!) and is even normalled, so if you only have a mono signal, the attenuated signal will be present at both outputs. That's what utility is all about!

There's not much else to say, except that it's passive, and draws no power - and it looks very classy in black and gold; and it's also only 2hp.