ダンスミュージック検索結果

Notes: The Fold Processor is a voltage-controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.

The wave folder creates new waveforms from standard sine, triangle, sawtooth, and square waves and includes a CV input with an attenuator, making it very easy to create beautifully animated folding sounds. Adjustable voltage-controlled Inject alters the bias point creating an even wider palette of sounds.

The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL-like glitched slides.

Overall results can sound evil at times and sweet at others, a true multi-faced devil.

Size: 12HP
Depth: 31mm
Power: +12V 60ma / -12V 55ma

Notes: Clever FM module that does digital-style through-zero FM using analogue circuits. Use any signals from other modules as your carrier and modulator, then phase modulate or wavefold in the FM Aid.

Supplier's Notes:
FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator. The module copies FM in how it is done in digital implementation, but in a completely analog circuit free of digital aliasing artifacts. Digital or software FM oscillators are mainly based on a ramp waveform which is then shaped to other waveforms. This is also represented in the FM AID module: sawtooth signal is expected on the Carrier input to give the indicated sine, triangle, sawtooth and square waveforms on the respective outputs. However the user is not limited to only use sawtooth for the Carrier and any other signal can be plugged giving many complex waveforms at the outputs.

All known FM tricks from digital implementation are also applied - you can endlessly experiment with the Carrier/Modulator frequency ratios, Modulation index (FM knob), Modulator's amplitude shaping (CV knob), feedback FM (output is fed back to the Modulator's input) and many other.
Carrier input has normalled connection to the Modulator's input. This internal routing is disconnected each time a plug is inserted in the Modulator's input. That is a handy option which allows the module to be used with only one signal source - this single signal will act as Carrier and Modulator at the same time. There won't be any frequency differences between Carrier and Modulator in this case, but many interesting wave folding sounds will be available anyway.

Technically speaking FM AID uses Phase Modulation, not Frequency Modulation. The sonic difference is that the produces sound is brighter.

SPECIFICATIONS

Carrier input level: -5V ... + 5V (can also accept inputs ranging from -1V ... +1V] to [-12V ...+12V] / [-15V ...+15V] using onboard trimmer)

Modulator input level: preferably -5V ... + 5V

CV input level: preferably -5V ... + 5V

outputs level: -5V ... + 5V

outputs impedance: 1 kOhm

module depth: 3 cm or 1,5 inches

power consumption: +45 /-45 mA at +/-12 Vdc, +50 /-50 mA at +/-15 Vdc

Notes: All channels support headphones with 16 - 600 Ohm impendances.

Superb sound with low distortion and great low end.

Linkable channels (B to A and C to A).

All inputs with multiples, ie feeding different mixer channels.

Mono input is normalized to stereo.

Protected with relais, assuring soft starts and DC protection for your headphones (> +/- 10V input)

Width: 12 HP

Notes: FONT is a massive sounding liquid filter- designed to bring you powerful basslines, tons of FM modulation and a clean resonance over your audio path.

It features two simultaneous outputs:
2-pole Low Pass
2-pole Band Pass

It can also work as a sine oscillator, tracking 1V/OCT when the resonance is at its maximum level.

FONT can be used to make basslines, acid patterns thanks to its organic and musically sounding resonance.

Ping it to produce percussion sounds such as, bongos, congas or toms.

Applying a pitch envelope, it really shines as a kick-drum machine!

22 mA +12V
25 mA -12V
0 mA 5V
15 mm deep
O 4.60 (10 Votes) Average Rating

Notes: High-resolution sound at a low price thanks to Tascam's US-HR range, provided here in 2-in, 2-out format with integrated MIDI in and out. Simple, no-fuss solution for hooking up to your DAW.

Supplier's Notes:
High-Resolution USB Audio/MIDI Interface (2 in, 2 out)

The US-2x2HR is a member of the Tascam US-HR series of high-resolution USB audio interfaces. It provides two mic/line/instrument switchable inputs and two balanced line outputs as well as MIDI I/O to your Windows or Mac computer or your iPhone or iPad. This interface is ideal for music creation and home recording with high demands on simple operation and studio-quality sound. The included loopback function and support for Open Broadcaster Software (OBS Studio), however, makes it also an excellent choice for podcast creation and live streaming.

The compact US-2x2HR incorporates a wealth of features, including high audio resolution up to 24-bit/192 kHz, ultra-low latency with a Windows buffer size starting at four samples, Ultra-HDDA mic preamplifiers with 48-volt phantom power for superior sound quality with ultra-low noise, a robust USB Type C connector, and a rich assortment of included software to start producing audio right away. This interface can also be used for mobile production or live streaming using your iPhone or iPad with the included Cubasis LE. Simply put, the US-2x2HR helps you create and distribute great-sounding audio wherever you go.

All US-HR models offer a unique dye-cast aluminum honeycomb structure on the side panels with a slight upward tilt. This design not only results in a sleek, eye-catching design, it also provides just the right amount of weight so the interface won't move when cables are connected or disconnected. Equally important, the upward tilt offers the ergonomic benefit of being angled in such a way as to make the interface easy to work with.

If you're a musician, producer or home-recordist who needs a solid, uncluttered, easy-to-use audio interface with superb sound quality, the Tascam US-2x2HR can be your reliable partner for many years.

The Ultra-HDDA (High-Definition Discrete Architecture) mic preamps used on the US-HR series feature a discrete construction. They have a higher number of components and are far away from mass-produced preamps. Their EIN (equivalent input noise) rating, which measures the absence of noise, is truly low for the US-2x2HR and US-4x4HR. Combined with a newly improved audio circuit and support for sampling rates up to 192 kHz, our in-house developed microphone preamplifier delivers enhanced audio performance with the most transparent and low-noise sound, reflected in a signal-to-noise ratio of 110 dB.

One issue when recording using a computer is latency, which is when audio signals are delayed through digital circuitry. Another is setting up the driver software that is used when connecting an audio interface to a computer. In order to eliminate these problems, our driver software introduces only very little latency and is easy to install. Furthermore, by making the external structure of these interfaces as simple as possible, the Tascam US-2x2HR and US-4x4HR allow users who are not expert users of audio equipment to operate them without concern.

The Settings Panel, which is installed on your computer, comes with a variety of functions. You can choose whether direct monitoring is done in mono or stereo and adjust the balance between input and computer signals. You can also switch the hardware inputs on and off individually and set the Windows buffer size according to your working environment.

For online broadcasting, Internet communication and other live streaming applications, the US-HR series interfaces offer a Loopback function which can merge input signals 1/2 with signals 1/2 coming from the computer (each can be set to mono or stereo) and send that mix to the broadcasting or other software on the computer. A software slider allows to adjust the final "broadcast" volume independently from the unit's line output level setting.

Instead of a computer, you can also use an iPad or iPhone together with the US-2x2HR/US-4x4HR to make music. Performance has been tested with not only the bundled digital audio workstation (Cubasis LE3), but also with other popular recording software - you can continue to use them even if you change DAW software. Since these units include MIDI inputs and outputs, you can connect MIDI keyboards, drum computers etc. to play sounds on the iPad or computer and thus expand your personal orchestra.

Maximum input level (Mic/Line/Inst): +10 dBu / +20 dBu / +10 dBV
Maximum input gain: 56 dB
Maximum output level: +20 dBu
Mic preamp equivalent input noise: 128 dBu
S/N ratio: 108 dB / 110 dB
Distortion (THD+N, mic to computer): 0,0013 %
Crosstalk: 95 dB
Power supply: USB / DC 5 V, 700 mA
Power consumption: 1.75 W
Overall dimensions (W x H x D): 186 mm x 65 mm x 160 mm
Weight: 1.1 kg

Notes: Sindikat is made to be placed in the heart of every modular setup: copy, invert, attenuate, scale, get different polarity versions simultaneously of two pair of mixes, mix CV as well as audio (up to 8 sources in total), mute or switch to add desired source to a bigger unity mix, scale two separate mixes with chosen gain.. All circuits can preserve their independent use and/or be combined!

Details & use:

The module consists of circuits designed to group the most useful operations for signal mingling in modular synth setups -but in the more fun manner!

It is designed in the way that the circuits can function independently -be patched to the other modules- or to be combined inside the module at the same time!

On the top of the module there is a buffered multiple (the bi-color led is indicating signal input and its polarity) : Next to the input there are two outputs giving the exact copy of the incoming signal. On the third output you'll get the 'attenuverted" version of that signal which is controllable by the dedicated attenuator/inverter potentiometer.

This signal can be further added (or muted) via its switch, internally to a unity gain mixer situated on the bottom of the module via its SUMM OUT.

This mixer has its own 3 inputs who will accept CVs as well as audio signals with an output gain of 1/3.

Its bi-color led will indicate the polarity of the incoming signals.

In the center of the module there is a CV Processor consisting of two mixers each mixing two signals- in the way that:
The first one takes two signals (A and B) and outputs simultaneously the positive version of their mix (AB+ OUT) and the negative version (AB- OUT).
Their gain is scaled by the potentiometer: going on 1x in the middle position to 2x fully turned. (After middle position with a stronger signal and due to higher gain it will start to saturate producing an distortion-like effect)
Further, via their switch, those mixes also can be added to a unity gain mix (SUMM OUT) and therefore creating a larger mix.
You'll do that by choosing which polarity output you want to send to a summing mix.
In the middle position of the switch the signal is "off" so you can use this to mute/un-mute the signal in the unity mix. Also, even if it is in "off" position this only breaks the internal link to a unity mix but you can still use their distinctive outputs to send your positive and negative mixes elsewhere in your system.

Goes the same for the second one: C and D inputs giving positive (CD+) output result and negative (CD-) simultaneously , all with gain select and the switch choice for summ positive or negative (or none) to a bigger unity mix.

You can also choose to use those two circuits as a simple attenuators for ex. by patching only one signal so you'll get an attenuator and polarizer at once!

The module can process CV and audio as well in every circuit.

Therefore, by summing eventually all the signals to a final "SUMM OUT" output you can create up to 8 sources -in the module- large mix!

Made for more fun with a modular!

This module fits perfectly well with Modulaire Maritime "Decca" switch-based manual control module.

As these modules are developed from practicing recording in "one take" (same for a live performing), combining them you get an extended control over CVs, gates and audio going on in the system, allowing to switch- stop/mute, change polarity, introduce/mix more gates, drums,.. on the fly.

8hp
25mm deep
Reverse voltage protected

Review: RECOMMENDED
How can heavy metal-ers not get excited about this one? While sporting a pretty serious price tag, this Super Deluxe edition of Black Sabbath's seminal fourth album is certainly one for the collectors, who will delight in the 11 additional studio recordings featured in the huge amount of bonus material here, which include snippets of studio dialogue, false starts and more rough around the edges nuances that bring the work to life.

As for the LP itself, it was something of a landmark moment in the band's journey - shifting the intensity and ferocity up at least three gears and then sticking a brick on the throttle to hold it in place. Perhaps Mojo's take on things puts it best; ""If booze and dope had helped fuel Sabbath's earlier albums, Vol. 4 is their cocaine ... Despite their spiraling addictions, musically Vol. 4 is another ambitious outing". Enough said.

Notes: DVCA

DVCA is a dual VCA based on the Mutable Instruments Veils. It features two separate voltage-controlled amplifiers, both with a gain and a response curve potentiometer, that is variable from linear to exponential. The outputs are normalized, so when no patch cable is present on output 1, output 2 will contain both signals, allowing the module to be used as a mixer. Several DVCAs can be daisy-chained for voltage-controlled mixer operation. It comes with jack lights that can be disabled via a jumper on the back.

These modules use tall bushing potentiometers to offer a more stable feel.

The module is fully assembled and tested. Eurorack power cable included.

Notes: Dual xFade is a compact voltage controlled crossfader suitable for both audio and CVs. Smaller knobs set manual crossfade between A<>B, and bigger knobs are CV attenuverters. LEDs show the adjusted positive and negative CV sides for easy monitoring.

Upper inputs (section 1) are normalled to lower inputs (section 2). Thus the same signal pair A&B can be differently crossfaded in both sections.

The switch clones section's 1 controls to the section 2, which is useful to make stereo Dry/Wet adjustment or stereo VCA.

This module can be used as:

two independent crossfades

two independent VCAs

stereo crossfade or Dry/Wet control

stereo VCA

panner

Four jumpers on the back can give optional 5x amplification for each A or B input. Sot it is easy to crossfade modular level with linear level from pedals. Installed jumpers give 1x amplification, removing jumpers gives 5x amplification.

Output 1 is mixed with output 2 if left unconnected.

Notes: Incredible sounding VCO module that helps you get incredibly rich signals out of your synthesizer. The Dreadbox Hysteria VCO features a huge frequency range of 16hZ to 32kHz. This gives you a lot of functional pitch to work with, allowing you to explore the sounds capable from this module.

The sounds themselves rest on a variable waveform selector - meaning you can scroll through the waveforms and blend them together. This can even be CV controlled, so you can obtain an evolving sound that changes over time. The modules in the Chromatic series give you a great starting point in the world of modular synths and are a must-have for beginners and professionals alike.

Power Consumption: 114mA @ +12V , 46mA @ -12V
10HP
35 mm deep

Notes: 4-input VCA stereo mixer w/ pan, stereo out, metering

50mm deep

Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector

Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplateADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate
This expansion allows extra I/O to the ADDAC506, namelly:

Four trigger inputs for the random engine.

Four CV random outputs from the random engine.

Notes: 3xVCA offers three high class amplifier circuits with linear characteristic. Thanks to AC / DC compatibility, a very low noise floor and basically no distortion, the module is not only a great partner for control voltages, but audio material as well. Besides a signal input and output, each VCA has its own CV input. The dual potentiometers regulate levels and bipolar CV attenuation values of all amplifiers. Using these rather unusual, yet very practical components, it was possible to equip the 3x VCA with a front panel that is only 6 HP wide. Switches allow the user to feed the results of one amplifier to the output of the next amplifier, so we can get 1+2, 2+3, and 1+2+3 outputs mix. Two-colored LEDs visualize CV and output signals.

60 mA +12V
60 mA -12V
35 mm Depth

Notes: The Octave Fuzz is SynthRotek's take on the classic 70's SuperFuzz circuit, made into a Eurorack module, which has improved on some aspects of the original as well, including an increased output.

Two distinct voices like the original: switchable between scooped midrange and massive midrange bump.

Aggressive: It will sound massive and in-your-face like no other circuit can. This is for sonic explorers and heavy music only. In short, it's not useful for EVERYTHING, but the things it DOES do it excels at. Sounds especially killer for keyboard and bass sounds.

Tuned to give a subtle distorted waveform one octave up via wavefolding (see the video to view this on an oscilloscope). (Completed modules come pre-tuned; there are calibration instructions at the end of the assembly instructions for the kits)

This circuit has been optimized for Eurorack. You can find a guitar pedal version here.

Current Draw:
32mA @ +12v
24mA @ -12v
0mA @ +5v

Notes: The Face The Fuzz is a modern take on a classic sound, modeled after the Dallas Arbiter Fuzz Face but with some important upgrades and modifications. Get the original Germanium PNP transistors for that classic tone just like the likes of Jimi Hendrix, Duane Allman, and George Harrison played!

What is the difference between Synthrotek's two fuzz pedals: Face the Fuzz and the Arbiter Fuzz Face Clone? The Arbiter Fuzz Face Clone uses the classic circuit that is known and loved by many, and everybody loves a classic. The Face the Fuzz pedal has been designed with a few key changes to make it more useful to the modern musician: a wider frequency response, the ability to daisy-chain the power with a 1 Spot, and the option to use temperature-stable Silicon transistors.

The Face The Fuzz comes with hand-tested and selected premium AC128 NOS PNP transistors. All of the AC128s for optimum gain and leakage current so that they are guaranteed to bias properly and sound great! Lower gain transistorshave been chosen for Q1 and higher for Q2 according to strict standards. Be assured that you will be playing a premium product that takes the guess work out of Germanium transistor testing.

Notes: Excellent value from this uniquely versatile pedal. Load or record acoustic guitar impulse responses and apply them to your electric guitar, transforming the tone and sound.

Supplier's Notes:

The Optima Air pedal is a programmable digital modelling acoustic guitar simulator for electric players. Plug in your electric guitar and morph it into any of 15 internal acoustic guitar models at will. An Impulse Response (IR) loader enables you to capture the tone profile of your favourite acoustic guitar and store it as a model that can be played from your electric guitar. To enhance the acoustic tone, the Optima Air is furnished with a foot-switchable studio quality preamp with 3-band EQ and a digital reverb section to generate ambience. The Optima Air also has an audio streaming USB interface providing, which can be used as a recording device and the USB can be used for remote editing via software which is downloadable for PC or Mac computer. Inputs and outputs include standard jack in and out, a D.I. XLR output, send/return effects loop, headphone output and aux line input for a myriad of connection possibilities. Optima Air is the acoustic guitar in a pedal for electric players either on stage or in the studio.

Power supply: 9Vdc, 500mA, negative centre (not supplied)
Sampling format: 24-bit, 48-kHz
Internal programmes: 15 models, 9 preset patches
DI output: XLR
USB computer interface: Micro USB port

The box for this item contains :

Optima Air pedal

Notes: Upgrade to Studio One 4 Professional from any prior version of Studio One Professional OR Producer!

There's a very good reason why so many musicians have switched to Studio One from older, more rigid programs. Built on a modern foundation that's not bogged down by legacy code, Studio One provides an efficient, creative companion from initial inspiration to final master. Its efficient, single-screen interface houses an unlimited number of tracks, intuitive editing tools, advanced virtual instruments, mastering, and video player- you spend your time creating music, not wondering what to click next. The 64-bit double-precision mix engine is state of the art, while the smooth, analog quality of the virtual instruments comes from proprietary techniques that provide much higher controller resolution. That's why Studio One just plain sounds better.

The reason why Studio One resonates with musicians is simple: PreSonus listens. Many new features in Version 4 are the direct result of user feedback, including AAF import/export so users can bring song data from their old DAW into Studio One. Add the most flexible arranging tools of any music program, full integration with Notion for superior notation, over 20 GB of carefully curated content, analog console emulation, advanced step sequencing, unified hardware control with the FaderPort series of hands-on controllers, and much moreiit's no wonder that Studio One continues to gain new followers every day.

Create Without Boundaries - Produce Without Limits

System Requirements:
Windows

Windows 7 (SP1 + platform update), Windows 8.1 or Windows 10 x64
Studio One 4 operates on 64-bit operating systems only.
Intelr Core Duo or AMD AthlonX2 processor (Intel Core 2 Duo or AMD Athlon X4 or better recommended)
4 GB RAM minimum (8 GB or more recommended)
Internet connection (needed for installation and activation)
Monitor with 1366 x 768 resolution (high-dpi monitor recommended)
A multi-touch enabled monitor is required for touch operation
40 GB hard-drive space
Mac

macOSr 10.11 or higher
Studio One 4 operates on 64-bit operating systems only.
Intelr CoreTM 2 Duo processor (Core i3 or better recommended)
4 GB RAM minimum (8 GB or more recommended)
Internet connection (needed for installation and activation)
Monitor with 1366 x 768 resolution (Retina display recommended)
A multi-touch enabled monitor with TUIO support is required for touch operation
40 GB hard-drive space

Notes: The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.

What's the difference between Black3 and Green3?
Approximately 15% of the Black3 production run meet higher specifications. These are hand selected from the batch and designated as Green3.

Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

The Green3 is hand assembled by Grado's team in Brooklyn, with some builders having over 25 years of experience. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. The coil winding techniques using ultra high purity copper wire, which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.

As in all Grado phono cartridges the Green3 is powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado's patented Flux-Bridger design allows the Green2 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.

Notes: The Hungry Robot Sample & Hold provides basic S&H functionality with some added bells and whistles. It uses an internal clock dialed into a very useful range. If the internal clock rate is not to your liking, you can bypass the Rate knob by patching a clock signal into Clk In. The Sample & Hold has a built in attenuverter giving a bit of added control over the random voltages that are outputted. White noise out for uses elsewhere. Traditionally a S&H samples voltages from chaotic white noise, but E.In allows you to bypass the white noise and patch in your own sample source (i.e. patching an LFO in for a bit crushed LFO). As with all Hungry Robot "Modular Boxes" the Sample & Hold can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-MINUS/PLUS: Attenuverter for output. Allows you to sweep between positive and negative voltage outputs.
-RATE: On board clock source ranging from approximately 25ms to 1000ms.

PATCH POINTS
-E.IN: Bypasses internal white noise as a sample source. Patch in any CV source that you want to sample from
-STATIC: Taps into white noise output (0-5V range)
-CLK IN: Bypasses internal clock with your provided external clock
-S&H OUT: Two buffered outputs of S&H voltage

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: Lovely little mono filter module in a compact desktop format. Based on the classic Prophet 5 filter, ideal for processing synths and signals, hooking up to Eurorack or other Hungry Robot modules.

Supplier's Notes:

The Hungry Robot VCF is an all analog, 4-pole low pass filter with a self-oscillating resonance control. It is a close replication of the filter circuit found on the famous Prophet 5. It uses a HM2040 which is a high quality, faithful replication of the original SSM2040 chip. This resonant filter has a beautiful tonal quality. The over-sized knobs provide a satisfying tactile response. The cutoff frequency can be controlled by external control voltage. It has a built-in attenuator and invert switch for the incoming CV. CV input does not track at 1V/Oct, but is scaled to act as a VCA when a 5V signal is applied to CV input. As with all Hungry Robot "Modular Boxes" the VCF can be powered by a simple 9V DC, Negative Center power supply.

KNOBS
-FREQUENCY: Sweeps the cutoff frequency of the filter.
-CV: Attenuator for incoming CV input.
-RESONANCE: Sets resonance of filter. Small volume drop is to be expected. Will self-oscillate at higher settings.

SWITCHES
-INVERT: Inverts the incoming CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-IN: Patch Audio Signal In
-CV: CV input for Frequency. Allows for CV control of this parameter.
-OUT: Patch Audio Signal Out

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Acapulco Gold is a dirt-simple distortion Device modeled after the sound of a cranked vintage Model T amplifier, bringing the openness, clarity, and crunch that only a dimed tube amp can provide, at a fraction of the size, and without expensive maintenance costs!

Since tone is in the hands, the controls of the Acapulco Gold are as simple as possible. The footswitch turns the pedal on and off, and the giant knob controls the output volume. That's it. The rest is at your fingertips. Want less gain? Turn down your guitar's volume knob. Need a darker rhythm tone? Roll back your guitar's tone control. Easy, right?

Big Knob: The big knob sets the output level, sometimes known as Volume. PLEASE BE CAREFUL, the Acapulco Gold is extremely loud!

With your guitar's volume all the way up, the Acapulco Gold roars like a wide-open Model T on the verge of explosion. At just-barely-backed-off, the Gold becomes a raunchy overdrive. At minimum guitar volume settings, the Acapulco Gold delivers a hazy, Nashville-sounding spank to your tone.

How about this? If your guitar has separate volume and tone controls for each pickup and a three-way selector switch, this little one-knob banger becomes a three-channel tone monster at the flick of your wrist!

This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.

This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 18 mA

Notes: With sleek design and studio-quality sound, these advanced monitors are the latest development of the classic series from Mackie; and have never been better. Whether studio-recording, referential listening or gaming, the easy setup with studio-standard sound of the CR4-X are an essential competent to the optimised listening experience. Rear panel inputs include balanced 14" TRS, 1/8" Stereo, and RCA. The box includes high-quality cables to enable a quick, easy, and reliable setup. The new and improved CR4-X carries its upgraded signature sound, a fresh new look with brushed metal front panel, plug-in and play setup, and professional audio components to ensure the absolute optimised sonic performance. 50 watts of clean sound, 4" polypropylene-coated woofer, and specially designed waveguides provide unparalleled clarity at all listening levels.

Notes: To monitor everything, the Mackie Producer Bundle provides Mackie's MC-100 Professional Headphones, which deliver clear rich lows and highs and very good noise isolation. They're excellent for tracking and referencing your mix.

The Mackie Creator Bundle is a must-have for content creators, podcasters, and streaming both in the personal studio and on the go. The Creator Bundle starts with Mackie's EM-USB cardioid condenser microphone, which connects directly to a computer via USB-C and captures everything with amazing detail-no EQ required. The mic includes onboard headphone monitoring, gain control, and mute and includes a tripod stand, mic clip, USB-C cable and other accessories.

The Creator Bundle also includes Mackie's MC-100 headphones-perfect for live production. For editing, critical listening, and general music listening, you can rely on Mackie's CR3-X multimedia monitor speakers, which deliver pro-quality sound using a 3-inch, polypropylene-coater woofer; 0.75-inch, ferrofluid-cooled, silk-dome tweeter; and 50W stereo amplifier. The CR3-X front panel sports a convenient on/off/volume control, a headphone jack that auto-defeats the speaker output, and a 1/8-inch Aux input for use with a media player or smartphone. On the rear are flexible 1/8-inch, 14-inch, and RCA line-level inputs. The speakers come with cables and other accessories.

Notes: Focused versatility seems an oxymoron when describing the features that led us to design the Mixwitch.

With only a pinch of mixing, inverting and controlled switching, we brew up a plethora of combinations and uses.

This is voltage processing magic!
The Mixwitch design comes from a frustration with attenuvertors (bipolar attenuators-inverters) whose off (neutral) position is difficult to retrieve, especially in live situations.

We went for a digitally-controlled analog path where polarity inversion would be at the touch of a button. So, the usefulness of attenuating/inverting can be realized by turning the pot down, swiftly pressing the inversion button and reopening the level. The zero level is where you expect it, with the pot full down.

Once we had a clean polarity control, we easily added a mute function offering the benefit of pre- adjusted pot settings ready to be activated at will.

The next step was to bring something extra, useful and creative. There are plenty of analog switches controlled by a clock; but arbitrarily selecting an input with a voltage is less known. Having both control capabilities combined with our specific mixer features creates a unique fusion: welcome to the Mixwitch !

Notes: The Switchblade Pro is our deluxe switching box featuring true mechanical bypass, soft switching, high quality and low noise buffers, volume controls for all input signals, high headroom and a multitude of possible configurations for all your signal routing needs. This compact pedal is a versatile and indispensable tool!

Notes: KR is based off of the concept of a guitar tonestack: you get a gnarly drive on the top and a super clean two-band shelving EQ with switchable midpoint after that. There are separate ins and outs, too, so if you want to EQ a thing and distort the other thing at the same time you can!

Kith Ruina's inspiration comes from the world of guitar amps. A drive into an EQ is an extremely common configuration for shaping guitar tone, and we find that it works extremely well for synths as well. A grungy drive into a pristine EQ gives excellent tone control, and with separate ins and outs for the two sections KR can be configured to fit into any patch you throw at it.

Notes: The updated Komplete Audio 6 is one of our favourite interfaces, packing six-in, six-out audio connectivity and MIDI into a neatly designed, stylish box with handy level control.

Supplier's notes:
Connect, create, and collaborate with our six-in, six-out audio interface. Featuring high-definition recording, ultra-low latency, and flexible connectivity, AUDIO 6 brings your whole setup together. You can plug in mics, guitars, and synths, create send and return loops with effects, and control synths and drum machines. Plus, you get all the software you need to capture performances, build songs, and polish recordings - bring any idea to life.

Whether recording your next album or gigging your latest release, your focus should be on creating at your best. With pro-grade sound, gig-ready portability, and plug-and-play simplicity, AUDIO 6 lets you do just that.

AUDIO 6 works with all your mics, instruments, and headphones. You've got a choice of connections and features: 48V phantom power, MIDI in/out, and four analogue outputs with additional CV/gate control for your analogue gear. Plus, easy-to-see top panel LED VU-meters for all four analogue inputs and the main stereo output.

Whether you're a solo performer, duo, or a full band, the AUDIO 6's pristine audio quality lets you sound as good on stage as in the studio. Turn your laptop into a live rig or vocal processor, with flexible connections to fit any performance. USB bus-power means fewer cables and power supplies, plus a big volume knob on top lets you make easy level adjustments while on stage.

Two high-power headphone outputs, with individual level controls, make it easy to collaborate. Hear exactly what you're recording, in real-time, with latency-free direct monitoring that lets you blend playback and monitored audio to your liking. We've also doubled their output power - great for stage use or high-impedance headphones.

Whether at a small band session or a freewheeling modular synth jam, having a flexible set of connections lets you bring your ideas together and capture music in the moment. XLR, TRS, S/PDIF, and MIDI aren't just letters, they're ways to make music happen - and we've put these connections right where you need them.

Notes: Erica Synths Pico VCO 2 - powerful, full analogue VCO with great tracking over 8 octaves just in 3HP! Combine two of those, add some PWM and have a sound of real analogue beast!

Features:

Manual TUNE and PWM controls
+-1 octave switch
1V/oct input with good tracking across 8 octaves
PWM CV input
Pulse and triangle waveform outputs
Input protection against overvoltage
Protection against reverse PSU connection

Technical specification:

Output signal amplitude: -5V - +5
PWM CV input (full span): -5V - +5V
Power consumption: +21mA, -19mA
Module width: 3HP
Module depth: 35mm

Notes: The power module from Endorphin.es is a module for the power supply of smaller modular systems such as skiff cases up to 104 TE width. The module consumes DC power between 12 and 20 volts from an external power supply unit. Voltages of up to +1000 mA and -700 mA are output, also depending on how strong the connected power supply is. In addition, there are two passive multiples.

Notes: The STAY Slim 2 tier keyboard stand is a lightweight (just 2.9kg) aluminium keyboard stand ideal for practice, studio and performance use. This model with curved arms on the top tier enables a peripheral such as smaller synth, laptop or mixer to be placed safely above the main keyboard. The stand is quick to put up and packs away quickly into the neat zip carry case that is included. Despite being so lightweight the keyboard can carry a 61 note keyboard of up to 10kg on each pair of arms. The tripod foot design raises the stand off the ground and provides a very stable plus gives room for sustain and other effects pedals to be placed exactly where you want them. In addition, the stands keyboard arms are height adjustable (top level max height is 1100mm) and the top deck arms are set at a 10 degree angle for ease of playing. Cables can be neatly run down the stand using the proved stretch clips.

- Maximum load capacity: 20 kg (10kg per tier)
- Automotive paint
- Ultra fast assembling
- Product net weight: starting at 2.8 kg
- Tote bag included

Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.

Notes: NuX Mighty 8BT is a compact guitar amplifier with features that enable it to be more than just a bedroom combo. Powered from the included 12V mains adaptor or optionally from 8 x AA batteries for portable use. The guitar input has clean, overdrive and distortion modes with modulation/delay effects and digital reverb. Settings can be customised for tone and effects and these are stored for each of the 3 modes. Deeper effects editing is provided by the Bluetooth link using the Might app, which is available from Google Play or App Store. A mic input is also included with a dedicated reverb send for vocals. A built-in drum machine is controlled by a simple but intuitive tap tempo/style button and rotary volume control. Aux in and headphone out complete the control panel to provide a multi-purpose jamming and recording amp for guitar players of all genres.

Notes: Everyone loves bass, so Minirig decided to take the Subwoofer to the next step - rather than the old 30 watts of power, it now has 40 watts of power! This ultimately gives you a cleaner low that matches the new Minirig 3.

Don't just hear the bass - feel the bass:

The Subwoofer works in harmony with your Minirig or Minirig Mini to enhance the low end.

Optimised Airflow Technology:

With Minirig's custom folded horn design you get bone shaking bass, in a small package.

Take the party on the road:

Chuck this little bass bin in your rucksack and complete your Minirig soundsystem set-up.

Notes: SOLINA, an emulation of the 70ies string machines!

The SOLINA module is based on th excellen work of Jan Ostman, who has developed a very good digital based emuation of the sound of the string synths that were popular in the music of the 70ies and 80ies, like ARP Solina (who gave this module it's name), Logan String and others.

Their unique sound is based on several, minor detuned sawtooth oscillators and an ensemble effect.

This module produces chords, which can be shaped in different ways, like selecting the base scale (minor, major), adding the 7th or a bass note and different variations of the chord. The sound can be shaped with a variable oscilator spread/detune, adding a phaser/ensemble and a tone knob for choosing the overall character between bass focused to only higher parts of the sound.

Notes: The Sumiko Pearl is a truly unique and precious find within the sea of entry-level phono cartridges. With decades of accolades to its name, the Pearl's smooth, natural sound reproduction breathes life into any recording with poise and transparency. Its diminutive price also belies its colossal ability to pull a complete sonic picture from each record it touches.

Rounding off the budget series with style and aplomb, the Pearl is an affordable audiophile marvel that's sure to delight.

Frequency Response:: 12Hz - 30kHz
Output Voltage: 4.0mV
Load Impedance: 47kO
Channel Seperation: 3dB @ 1kHz
Channel Balance: <0.5dB@ 1kHz
Stylus Type: Elliptical
Compliance: 12x10-6 cm/dyn
Tracking Force Range: 1.5 - 2.0g
Recommended Force: 2.0g
Cartridge Weight: 6.0g

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: MMF is an analogue, multimode filter with a 12dB per octave slope. Its sonic character swings all the way from classic low pass to squelchy acid lines. Simultaneous outputs of low pass, high pass, and band pass filter types are provided allowing for many variations of the input signal. Whether you're looking for smooth and creamy, or resonant and wild, MMF can go there.

Notes: Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.

Notes: Full-blooded distortion - Pit Viper is a solid state overdrive for hard-boiled musicians. The circuit can generate clean, beefy signal boosts. However, its true strengths lie in aggressively screaming distortions with a tangible character.

Pit Viper comes equipped with the following control elements:

- Toxicity: Gain potentiometer - Please turn up for heavy distortion.
- Hiss: Tone knob - Turn clockwise to cut the treble.
- Venom: Volume potentiometer
- Fear: Three-stage soft clipping switch - Activates normal soft clipping or a more tube-like version with less treble.
- Malice: Three-stage hard clipping switch - Activates beefy hard clipping or a spongier version with less treble.
- Blend: Dry / Wet potentiometer
- Bite: CV input plus attenuator to cut the high frequency range. Without a cable plugged in, the knob can be used for adjusting the treble manually.
- Saturation: CV input plus attenuator and on/off switch to influence gain and saturation.
- Filter: CV input plus attenuator and on/off switch to control the Viper's VCF circuit.

Via a jumper on the circuit board, users can choose between several filter types:

- Passive clipped low pass
- Unbuffered high pass
- Buffered high pass
- Buffered low pass

Furthermore, there is a trim potentiometer on the circuit board, which can be used to adjust the gain.

PLEASE NOTE: Any scratches on the front panel are part of the Pit Viper's design.

Notes: The DIGI DJ-Stashpack XL Plus is a versatile and lightweight gig bag that and was designed to be flexible in order to accommodate a variety of equipment. It features a practical, height-adjustable Rolltop opening to easily stash a battle-mixer, records, production gear or a DJ-controller. With its durable material, solid processing and a unique design, the new DIGI DJ-Stashpack XL Plus is perhaps the most versatile gear bag in the market.

Fits: Pioneer DDJ-SR2, Pioneer DDJ-RR, Pioneer DJS-1000, Numark NS6II, Numark NV2, Numark Mixtrack Pro 3, NI Kontrol S5, NI Kontrol S4, NI Kontrol S2, Reloop Terminal Mix 4, Roland DJ-202, Pioneer DDJ-SB2, Pioneer DDJ-RB, Numark Mixtrack Pro 2, Denon MC-4000, Vestax VCI-400, Vestax VCI-380, Akai MPK-25, Akai MPC Renaissance, Rane Seventy-Two, Rane Sixty-Two, Rane Sixty-Eigth, Pioneer DJM-S9, Pioneer DJM-900 SRT/NXT, NI Kontrol Z2, Laptop up to 17", 12" Vinyl, Accessories