ダンスミュージック検索結果

Notes: Alter is an effects processor for Eurorack format. There are two versions of the Alter which are visually identical except the names "Alter 1" and "Alter 2". This is Alter 1. Internally, 1 & 2 have an entirely different set of effects from the other. Each version features 7 unique and meticulously designed DSP effects.

Control

- Controls for mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects (note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to X and Y).
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Sift all have CV control inputs.
- Each control level or CV input is visualized on the control panel.

Ins and outs

- Stereo inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input
- Mono input is made stereo within the DSP and outputs to both left and right channels
- Stereo outputs for right and left channels

Effects

The effect is selected by the hexagonal touch pad. The effects for Alter 1 are as follows:
1 - long delay
2 - tight, notated granular delay
3 - plate reverb
4 - shimmering reverb
5 - distortion multi-filter
6 - pitch delay
7 - stutter glitch

Specs

Includes printed manual
+12V: 160mA
-12V: 0mA
+5V: 0mA
16HP width
25 mm Depth

Notes: Alter 2 is an effects processor for Eurorack format. There are two versions of the Alter which are visually identical except the names "Alter 1" and "Alter 2". This is Alter 2. Internally, 1 & 2 have an entirely different set of effects from the other. Each version features 7 unique and meticulously designed DSP effects.

Control

- Controls for mix, X, Y and filter as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects.
(note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to X and Y.)
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and filter all have CV control inputs.
- Each control level or cv input is visualized on the control panel.

Ins and outs

- Stereo inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input.
- Mono input is made stereo within the DSP and outputs to both left and right channels.
- Stereo outputs for right and left channels.

Effects

The effect is selected by the hexagonal touch pad. The effects for Alter 2 are as follows:
1 - Analogue delay
2 - Reverb with infinite capture and LP + HP filters
3 - Choral reverb
4 - Palindrome reverse delay - backward/forward repeat
5 - Time stretch
6 - Pitch shift (notated semi-tones)
7 - Time stretch glitch

Specs

Includes printed manual
+12V: 160mA
-12V: 0mA
+5V: 0mA
16HP width
25 mm Depth

Notes: Tone is a quad, voltage controlled filter with low pass and band pass outputs. Its four channel architecture enables the intuitive patching of shimmering, polyphonic textures. The 24dB slope provides a warm, buttery character. Self oscillation allows each channel to double as a sine wave oscillator with v/oct tracking across four octaves. Cascade OTA topology. A perfect match for the Chord.

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

6HP Eurorack
+12v: 140mA
-12v: 22mA
Sinc - from Latin: "treasure"

Legio - from Latin: "legion, army"

"A lot of treasure"

Notes: Stereo oscillator with wavemorphing, folding, and PM

"We may have just gotten the perfect Noise Engineering oscillator - in the most compact package possible." -- CDM Blog

Sinc Legio is a simple oscillator with some tricks up its proverbial sleeve. If you need some basic waveforms, Sinc has you covered - and it makes it easy to spice up those waveforms with phase modulation, wavefolding, or hard sync. Sinc pairs well with other oscillators in your system, too: hard-sync and stereo PM inputs make complex sounds easy to patch. Combine broad-ranging timbral parameters with a vintage-inspired chorus, and you're well on your way to stereo sound-design heaven in just 6 HP.

Sinc's multiple algorithms give a world of timbral possibility at the flip of a switch. Phase modulation, plucky FM, and bright and heavy modulation await. And on top of that, Noise Engineering have added a wavefolder to it. Shape and fold to your heart's content in Fold mode.

Not only is Sinc an incredible oscillator on its own, it's also part of the Legio platform. Use the included USB cable to connect to the Customer Portal and swap the firmware to any other Legio firmware, completely free, at any time. Let that sinc in!

Notes: The 1022GX record cartridge is recommended for the discerning listener. The diamond stylus is a Vital PH type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.

Notes: Delay and granular sampling combine to create unique ambience effects, creative reverbs and glitchy chaos. Hugely versatile pedal with five contrasting programs.

Supplier's Notes:
In the high woodlands of the north, undiscovered by most inhabitants, there ruled a clan of old, mystic Treefolk. On the first new moon of spring, these Treefolk could be heard grafting limbs to grow their young - splicing bits of branches from each generation to produce the next line of Treefolk. These new beings keep the lifeblood of all who came before in their new skin. These sounds are in part very old, but in part very new. They are referred to as... Fable.

Let your storybook adventure grows with the Fable Granular Soundscape Generator. The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds. The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analogue feedback path. Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms.

So, what exactly is this granular effect and why is it a magical experience when combined with delay? Granular is a digital processing technique of micro-sampling, wherein short samples called grains are read from a delay buffer. In the Fable, players can adjust these grains by manipulating their sampling length, position, and buffer size from which they're read. They can be played at double or half speed for pitch shift and time stretching effects, play them in reverse, read from multiple positions, and more, in order to achieve different effects.

It's a powerful but complex technique and Walrus Audio created five streamlined programs in the Fable that explore different aspects of its sonic range.

Programs

I. Reverse Delay into Reverse Granular

Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Reversal and re-reversal build up in the feedback paths, creating a complex and organically shifting soundscape. Turn grain size down for long, smooth reversed transients, and grain size up for stuttering reverse glitch madness.

II. Forward Delay into Octave Up Granular

Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Swarms of double-speed grains build up in the feedback path for bright and airy cascades of sound.

III. Analogue Delay into Octave Down Granular

Program 3 runs a warm, dark analogue-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Slowed down repeats combine with analogue-style processing to create deep, thunderous footfalls and thick, murky ambience.

IV. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)

Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Multiple points of sampled sound build upon each other in the feedback paths to create glitchy clouds and unique organic reverberance. Time in this program controls time-stretching of both granular algorithms, changing both the length and tonal character of the granular effect.

V. Forward Delay into Randomized Pitch Granular

Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. Pitch changes with each new grain, so play with the X knob in this program to control the rate of randomized pitch modulation.

Notes: Polydactyl Versio is Noise Engineering's take on a multiband dynamics processor. Polydactyl Versio is equally at home on single-instrument timbral processing and on end-of-chain gloss. Taking inspiration from Noise Engineering's Librae Legio, Polydactyl Versio applies a unique and transparent algorithm across three bands for maximal dynamic impact. Add in a multiband saturation knob and noise gate, throw in a limiter, and you have a processor that gives ultimate control of color and dynamics.

Polydactyl Versio is part of the Versio family: this platform module can be transformed into a completely different effect by loading a growing number of alternate firmwares, completely free! Plus, with open-source support and documentation at LibDaisy, you can write your own firmware. Grab a Polydactyl Versio and process your signal into submission or total rebellion with three separate bands, saturation, limiting, and noise gating.

Size and power:
10 HP
+12v: 125ma
-12v: 10ma
+5v: 0ma

Notes: With the Zomo Flightcase D-Live-4 NSE, you can expand your DJ gear with a reliable partner that securely accommodates and stylishly showcases your Denon DJ SC Live 4 DJ controller. This high-quality flight case stands out for its robustness and elegance and belongs to the trendy NSE Series - Night Style Edition, which is renowned for its unique aesthetics and durability.

The Flightcase D-Live-4 NSE is the perfect shield for your DJ controller, whether you're traveling by car or air. These resilient cases are ready to face any challenge and protect your valuable equipment from the toughest stage conditions.

The flight case is made from 9mm thick laminated plywood, providing extra stability. This material safeguards against impacts and scratches, effortlessly withstanding the demands of touring. The sturdy construction is further enhanced by robust ball corners and specially reinforced, black lacquered aluminum profiles that ensure long-lasting durability while adding an attractive appearance to the case.

The Zomo Flightcase D-Live-4 NSE is incredibly user-friendly. The lid and front panel can be quickly and easily removed before each gig, even with the DJ controller still inside the case. This allows you to be ready for action at any time and focus entirely on your performance.

Not only does the Zomo Flightcase excel in practicality, but it also boasts an impressive visual appeal. Its elegant NSE Edition in black is a true eye-catcher that commands attention and emphasizes your professionalism. The case features convenient butterfly latches for secure handling, allowing for easy opening and closing of the lid.

You can rely on its high durability and optimal fit, ensuring your DJ controller receives the placement it deserves-secure, protected, and stylish.

Zomo Flightcase D-Live-4 NSE Features

Perfect fit: Custom-made for the Denon SC Live 4, the Zomo Flightcase D-Live-4 NSE provides optimal protection and a snug fit, keeping your DJ controller safe and well-protected.
Premium construction: Crafted from laminated 9mm plywood, the flight case offers a robust and durable structure that withstands both impacts and scratches.
Additional protection through interior padding: Soft interior padding safeguards your DJ controller from damage and unwanted influences, providing a secure and protected storage space.
Quick and easy access: The lid and front panel of the flight case can be quickly and easily removed, even with the DJ device still inside the case. This is ideal for fast access before and after performances.
Elegant and eye-catching design: With its sleek design in the black NSE Edition, the Zomo Flightcase captures attention and highlights your professionalism as a DJ.
Sturdy butterfly latches: These ensure a secure closure of the flight case while remaining easy to use. They also provide the option to attach an optional lock for additional security.
Transport-friendly: Integrated handles make the flight case easy and comfortable to transport.
Long lifespan: The flight case's sturdy ball corners offer additional protection against impacts and vibrations, contributing to its extended lifespan.

Technical Specifications

Compatible devices: 1x Denon DJ SC Live 4
Exterior material: 9mm plywood
Colour: Black (NSE)
Weight: 13.7 kg
Exterior dimensions: 716 (width) x 501 (depth) x 206 (height) mm

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: Crafted with the breakthrough design philosophy behind the acclaimed Katana guitar amp series, the Katana-110 Bass delivers premium sound and advanced features perfectly tuned for the needs of serious bassists. Three unique amp characters and onboard BOSS effects provide a wide range of tones, backed by a stage-ready, 110-watt class AB power amp, custom 10-inch woofer, and tweeter with on/off switch. And with comprehensive EQ, flexible connectivity, and more, the Katana-110 Bass is ready to take on any playing situation, from stage to studio to everyday practice at home.

Refined Tone And Authoritative Power

The Katana-110 Bass brings you high-performance amplification fuelled by decades of BOSS knowledge and expertise. Armed with 110 watts of time-tested class AB power, this gig-ready amp provides big volume, punch, and presence and smooth, natural drive as you turn up the gain. Three unique preamp types are also available-each with a powerful three-way Shape switch to fine-tune the character-so you'll always have the perfect sound for any style or genre.

Vintage-A classic tube voice with organic tone and natural drive.
Flat-Smooth, clear, and dynamic tone with rich harmonic character.
Modern-Quick dynamic response with extended bass range.

Command The Stage

With its custom-designed speaker system and rock-solid combo cabinet, the Katana-110 Bass produces a commanding voice to drive your band in any musical situation. The fundamental tone of the 10-inch woofer is complemented with a tweeter for high-frequency definition that's ideal for slap and other modern playing styles. Our efficient bi-amp design delivers clear and balanced sound, and the tweeter can be turned off with a panel switch for a more traditional bass tone if desired.

Four Independent Effects Sections

The Katana series is famous for its onboard BOSS effects, and the Katana-110 Bass is no exception. Dedicated comp/limiter and drive sections provide core processing, while FX1 and FX2 offer a treasure trove of options from the BOSS bass effects library, from standards like chorus and flanger to octave, bass synth, and more. The FX2 section also includes delay and reverb, and over 60 total effect types are available for loading via the BOSS Tone Studio editor.

Precision Sound-Crafting Tools

With the intuitive panel controls on the Katana-110 Bass, you can quickly refine your tone in detail. The studio-inspired Blend section lets you mix in some dry signal, which you can pre-shape from the panel with three customizable settings for the optimum tonal fusion. A comprehensive four-band EQ is also on hand, complete with three selectable frequency centres in the low-mid and high-mid bands.

Rich Performance Versatility

The flexible Katana-110 Bass is your perfect partner for any live gig. Six Tone Setting memories are available for storing and recalling the sounds you create, including preamp type, EQ, Blend, and effect settings. You can switch memories from the panel and go even further with optional footswitches, an expression pedal, and the GA-FC Foot Controller. There's also a balanced XLR output for connecting to a house PA, along with a switch to select between direct, pre, or post signals.

Recording And Practice Powerhouse

The Katana-110 Bass is equally suited for studio recording and home playing. The compact footprint takes up minimal space, and the variable Power Control lets you dial up cranked-amp tones at family-friendly volume levels. A headphones/recording jack provides a direct output with effects and mic'd cab emulation with three Air Feel settings, while USB lets you interface with computer production software and track with great tone.

Specifications
Output Power: 60 W continuous (RMS), 110 W peak
Nominal Input Level: INPUT: -10 dBu (1 M ohm), POWER AMP IN: -10 dBu (20 k ohms), AUX IN: -10 dBu (20 k ohms), RETURN IN: -10 dBu (100 k ohm)
Speaker:
WOOFER: 25 cm (10 inches) x 1
TWEETER: x 1
Controls: POWER switch, MASTER VOLUME knob, POWER CONTROL switch (STANDBY, 1 W, MAX), TWEETER button

[INPUT EFX]: COMP button, DRIVE button, COMP knob, DRIVE knob

[AMPLIFIER]: PAD button, SHAPE button, TYPE knob (VINTAGE, FLAT, MODERN), GAIN knob, VOLUME knob

[BLEND]: BLEND button, DRY LEVEL knob

[EQUALIZER]: LOW MID button, HIGH MID button, BASS knob, LOW MID knob, HIGH MID knob, TREBLE knob

[EFFECTS]: FX1 button, FX2 button, TAP button, FX1 knob, FX2 knob

[TONE SETTING]: CH1 button, CH2 button, CH3 button, PANEL button

[BALANCED OUT]: GND LIFT switch (OFF, ON), SELECT (POST, PRE, DIRECT)
Indicators: COMP, DRIVE, PAD, SHAPE, BLEND, LOW MID, HIGH MID, FX1, FX2, TAP, CH1, CH2, CH3, PANEL, TWEETER

Connectors:
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
BALANCED OUT jack: 1/4-inch phone type
SEND jack: 1/4-inch phone type
RETURN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
GA-FC jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
BLUETOOTH ADAPTOR SLOT: Bluetooth Audio MIDI Dual Adaptor
AC IN jack
Power Consumption: 77 W
Accessories: Owner's manual, Power cord, GA-FC sticker

Options (sold separately): Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
GA FOOT CONTROLLER (GA-FC)
Bluetooth Audio MIDI Dual Adaptor (Model BT-DUAL)

Size & weight
Width: 470 mm / 18-9/16 inches
Depth: 300 mm / 11-13/16 inches
Height: 500 mm / 19-11/16 inches
Weight: 16.8 kg / 37 lbs 0.6 oz

Notes: When Empress released the original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better.

On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we've now added a fully variable sidechain high pass filter, and a two position 'tone + colour' circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.

Specifications:
Input Impedance 1M
Output Impedance 2.2k
Frequency Response (-3dB) 10Hz - 20kHz
Distortion less than 0.1%
Noise -101dB
Power Input Voltage 9 - 18 V DC (Negative tip)
Power Input Connector 2.1mm barrel connector (Negative tip)
Power Consumption ~ 100mA
Enclosure Material Die Cast Aluminum
Input connector 1/4" Jack
Output connector 1/4" Jack
Height (Enclosure only) 1.5"
Height (including controls) 2.5"

Notes: With Mantis, Tiptop took their years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis is beautiful and the color contrast between legs and body gives it its identity. Legs are offered in 4 different colors so anyone can find the right look.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

***UPDATE - MAY 2021 ***
As of May 2021, all Mantis cases shipped have a small update to the design. The connector for SyncBus is no longer included. This connector was never used as Tiptop didn't develop the cable for it, and the connector is no longer in production by the manufacturer so it was removed. The Mantis still has the same power supply and functions as before.

Notes: With Mantis, Tiptop took their years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis is beautiful and the color contrast between legs and body gives it its identity. Legs are offered in 4 different colors so anyone can find the right look.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

***UPDATE - MAY 2021 ***
As of May 2021, all Mantis cases shipped have a small update to the design. The connector for SyncBus is no longer included. This connector was never used as Tiptop didn't develop the cable for it, and the connector is no longer in production by the manufacturer so it was removed. The Mantis still has the same power supply and functions as before.

Notes: The RS-650 Echo / Reverb is a combination of the RS-310 and RS-440 which are based on the same circuit.

It offers both delay (echo) and reverb settings in one module. It is based on a bucket brigade device (BBD) with six parallel delay taps. Those six delay times have no relationship to each other and their outputs have different levels. You have to consider the reverb effect as a mixture of six different short delays what results in a dense sound. The clock frequency which scans the bucket brigade is audible and you'll have to use a low pass filter in order to eliminate or minimize it. In Reverb mode the delay time can be set between 2.5ms and 150ms and in Echo mode it spans from 75ms to 200ms.

All modules by Analogue Systems come ready to use with five years warranty mounted in the by the customer preferred rack or cabinet.

Depth: 65mm
HP : 12

Notes: Killer physical modelling module collab from two of the biggest names in their respective fields of hardware and software. Generates a huge range of percussion instruments plus synths and bass tones.

Supplier's notes:
Plonk uses a technique known as physical modelling to synthesize, with great realism, the way in which sound is produced by acoustic instruments. The Plonk module is, itself, focused primarily on creating percussive sounds - both pitched and un-pitched; natural and unnatural; acoustic-sounding or totally electronic.

Plonk does this by breaking sound creation into two distinct elements - the exciter and the resonator. The exciter is a mathematical model of the device used to strike a particular surface. Plonk, because it's percussion oriented, has two types of exciters: one modelled on a mallet, and the other providing a noise source. The resonator is a virtualization of the object being struck, which vibrates, resonates and creates the body of a sound. Plonk offers several types of resonators: beam; marimba; drumhead; membrane; plate; and string.

Plonk provides numerous parameters that let you shape, mould and design both the exciter and the resonator, thus enabling you to synthesize the sound of striking or scraping almost any type of object - real or imagined. In this way, Plonk can accurately model the sounds of kicks, snares, toms, cymbals, claps, tablas, congas and all manner of traditional percussion instruments. It can also model pitched percussive instruments, like vibes, marimbas, and even bass or guitar-like tones. Of course, it additionally excels at modelling instruments that heretofore never existed.

Best of all, the sounds created by Plonk are not static - any sound you design can respond dynamically to velocity, as well as four different modulation inputs. This means the sound of Plonk can change completely from note-to-note (or strike-to-strike). Because of this, Plonk is actually a duophonic (2-voice) module, which lets the sound of one note decay naturally when a second note (possibly employing an entirely different set of modelling values) is struck. Thus, hitting a new note does not choke the sound of the previously struck note (unless you want it to, of course)!

Plonk stores up to 128 patches in its internal memory, and ships with many presets programmed by professional sound designers and composers. You may overwrite these patches if you wish, and banks of patches may be transferred via MIDI System Exclusive over Plonk's built-in mini-USB port to facilitate offline storage by programs or websites that support this capability.

Plonk was developed in cooperation with Montreal-based Applied Acoustics Systems - physical modelling pioneers, and the creators of Tassman, Lounge Lizard, String Studio, Ultra Analog, Chromaphone and numerous other plugins. It is with great pleasure that Intellijel brings the potential of this physical modelling technology to a hands-on, CV-laden device capable of the sort of dynamic control and sonic exploration that modular synthesists demand.

Notes: Another clever one from Knobula, this chord-based sequencer/arpeggiator adds versatile harmonic options to your creative process. Pair it with the Poly Cinematic module for best results.

Supplier's Notes:
Generate extraordinary chords without using a keyboard.

Chord Pilot introduces a whole new take on the task of chord creation and performance offering 192 chord memories, a strummer, an arpeggiator and an 8 step chord progression sequencer, all in one compact 12hp package.

Knobula have thrown away the music theory rule book and instead offer a module that encourages the curious mind to discover alternative musical pathways, whether for generative patches or for EDM riffs.

To generate a new chord, Chord Pilot uses a series of controls that alter the width and spread of 'fingers' over a virtual keyboard before conforming them into a variety of musical moods from the pure and harmonious to the terrifying and cacaphonic.

Like all Knobula products, Chord Pilot has been designed primarily with performance in mind, to inpsire by experimentation, to lose yourself in the moment, and to occassionaly generate impossibly hard to play super chords.

With the ability to store and transfer chords in sets of eight, Chord Pilot makes a great companion module for Poly Cinematic, but it is equally at home serving any poly synth with a midi input.

Discover Chord Pilot, your guide, navigator and explorer to a whole new universe of musical harmony, and beyond.

Notes: Cleverly versatile MIDI foot controller designed for hands-free control of instruments, effects and software. Trigger patches, tap tempo, mute and unmute tracks, or perform your music in other innovative ways.

Supplier notes:
You've never had this much control over the beat, and it's all with your feet.

This is the only MIDI Footswitch built from the ground up to work with the BeatBuddy. It ships with a BeatBuddy Mode working right out of the box to boost your BeatBuddy with the following abilities:

Hands-free content control! Never bend down during a show to change a song again!
The ability to choose song parts out of order, including going to the past part.
Single BPM tempo adjustment.
Double time.
Half time.
Easy to format expression pedal tempo control.
Live tap tempo.
Expanded accent hit options including clap, snare, tambourine, hi-hat, and kick.
Single-press stop.
AEROS LOOP STUDIO AND MIDI MAESTRO
Experience full control over your live sound. This is the best MIDI Controller for live song and loop creation.
The MIDI Maestro also features an Aeros Loop Studio mode. It works right out of the box to boost your Aeros Loop Studio with these abilities:

Hands-free song control.
Single-press track muting/unmuting.
One-press undo/redo.
Single-touch new song part recording.
One-touch new track recording.
Mute/unmute any track (not selection specific).
Play song parts out of order.
MIDI MAESTRO AND YOUR GEAR
The MIDI Maestro puts the full power of MIDI into a package that's easy for anyone to use. It's the first MIDI Pedal controller that lets musicians skip on reading lengthy MIDI manuals and just jump right into playing. On top of being easy to use, it has great depth for those willing to explore its features.

With preset in app commands, easy customization, and presets for popular gear, the MIDI Maestro is the premier choice in MIDI Footswitches. Further, there's no stress about pressing the wrong button thanks to the built in displays. In addition, with 10 active pages per preset, and the ability to send up to six MIDI commands in a single press, you won't find yourself limited.

Notes: Very nice little physical modelling voice, serving up to eight notes of polyphony via stereo outputs. Plucked strings, tuned percussion, an excellent prepared piano mode and more.

Supplier notes:
Surface is a multi-timbral physical modeling voice. Its output ranges from plucked strings and marimbas, all the way to FM drums.

Each model features stereo outputs and up to eight unique voices that can be active at a time.

Notes: A typically comprehensive approach to noise sources from Befaco, featuring five different circuits plus two analogue multimode filters and plenty of CV controls for sculpting the output.

Supplier's Notes:
Noise plethora has three different noise generators:

The first two are identical and are composed of digital algorithms followed by a 12dB analog multimode filter.
Each program has two variables (Named X and Y) addressed by two manual controls and two associated control voltage INs.
Ships with an extensive (and expanding) algorithms library: textures, wave clusters, harsh noises, and glitches.

Generator C has three simultaneous outputs:

White. Flat Response Classic white noise.
Gritty. Granulous texture noise, with voltage-controlled grit quantity.
Filtered. Is the White or Gritty noise followed by a 24dB multimode VCF.

A total of 5 different noise sources in one module!

Dimensions:

14 HP
25 mm deep

Current Draw
110 mA +12V
67 mA -12V
0 mA 5V

Notes: Bluetooth-equipped version of Audio-Technica's excellent LP120 turntable. Built-in USB connection allows you to hook directly up to a PC for recording vinyl. Great value.

Supplier's Notes:
This version of Audio Technica's critically-acclaimed AT-LP120X USB, now features full wireless Bluetoothr 5.0 connectivity, allowing you to enjoy your favourite vinyl records on the latest Bluetoothr speakers and wireless headphone technology.

The LP120XBT-USB can be plugged into PC, Linux or Mac allowing you to record and convert your vinyl collection to digital tracks, while the fully manual tonearm puts you in control, allowing you to position and set playback wherever you like.

Taking Your Vinyl to the Next Level

Crystal Clear Bluetooth Wireless Audio

Compatible with most Bluetoothr speakers and headphones, the LP120XBT-USB pairs seamlessly to your devices. Simply press the Bluetoothr button, located next to the tonearm, for 4 seconds and connect to your chosen speakers, it's that simple.

You can also connect to Bluetoothr wireless headphones, giving you the flexibility to enjoy your vinyl records without the clutter of wires or having to be near your turntable and music setup. Sink into your comfiest chair and wirelessly enjoy over half a century of Japanese audio engineering and sound excellence.

Bluetooth 5.0 Technology

USB and Analogue Output

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

AT-VM95E Dual Magnet Phono Cartridge

Multiple Connectivity Options

Plug and Play

The LP120XBT-USB is designed to give you a high-quality listening experience that's easy to enjoy right out of the box. A built-in preamp means the LP120XBT-USB can be plugged directly into your existing speakers, or, with the simple press of a switch, connect wirelessly via Bluetoothr 5.0 to any Bluetooth-compatible speaker, supported home assistant or wireless headphones. Space saving with no external amps, no clutter and no mess; just incredible sound and reliable features designed with over half a century of Japanese audio innovation.

The LP120XBT-USB can also be plugged directly into your computer, for audio playback via your PC speakers or for simple and easy backup and transfer of your vinyl records to playback on your smart devices when on-the-go.

Over 55 Years of Analogue Excellence

Iconic Sound Loved The World Over

The LP120XBT-USB and LP120XUSB line are some of the best-selling turntables around the world, with over 2,500 5-star reviews on Amazon and consistently high feedback from beginners, music lovers, professionals and audiophiles. Audio Technica designed the LP120XBT-USB with you in mind, eliminating the need for expensive amps or convoluted speaker setups.

Based on the iconic DJ turntables and almost 60 years of Japanese audio innovation, the LP120XBT-USB lets you plug directly into your favourite speakers, or enjoy your vinyl collection wirelessly via Bluetoothr to your smart speakers or wireless and truly wireless headphones.

Specifications

Turntable
Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum

Notes: A multi-VCA module on steroids, the Morph 4 is designed as a modulation hub for an entire Eurorack system, capable of working in coutnless different ways. Proper versatile business.

Supplier's Notes:
Modulation is the core concept of modular synthesis: parameters changing over time, adding movement and musical interest to what would otherwise be merely static sounds. Being able to control the amplitude of signals throughout a patch is therefore essential, and one can never have too many voltage controlled amplifiers (VCAs).

Designed as a fully-featured modulation hub for Eurorack synthesisers, Morph 4 takes the basic concept of the multi-VCA module to the next level.

Four linear amplitude modulators are controlled by a master 'morph' parameter. The response of each modulator to this parameter is completely variable, both manually and under voltage control, and can be overridden if desired. Each response is triangular, with the 'position' parameter setting the maximum point along the morph axis, while 'span' determines the width of the triangle's base.

In addition to separate signal inputs and outputs, a variety of combined outputs is available as well: A+B, C+D, add (unity gain) and averaging mixes, and instantaneous minimum and maximum. Input normalisation makes it easy to send the same signal to multiple modulators, while output and modulator response LEDs provide essential visual feedback.

The combination of master control, fully flexible modulators and multiple combined outputs creates a module truly embodying the spirit of 'patch programmable' modular synthesis. Use Morph 4 as a voltage controlled mixer, dual crossfader, dual panner, interpolating scanner, interpolating distributor, quad VCA, quadraphonic controller, slope modifier, rectifier, complex waveshaper or something in between any of those- the choice is yours.

Notes: Kraken is a physical modelling snare drum with a wide range of sounds.

With 32 different shell models, nose algorithms and different distortion types as well as a pitch shifter, the snare sound can be customized as desired.

The additional CV inputs (velocity, accent, decay) can be used in conjunction with a sequencer or other modulation sources to create realistic drum patterns. With the optional pitch shifter at the output, reminiscent of old smapler and pitch shifter pedals, the tonal possibilities can be expanded even further.

Features:

Integrated distortion
Digital and analogue noise sources
Pitch shifter
100% digital synthesis, no samples
Great variety of sounds
Two trigger inputs, which produce a realistic "rimshot" sound when used simultaneously

Power consumption: 61mA at +12V and 17mA at -12V

Depth: 38mm

HP : 8

Notes: Pedal version of the excellent Golden Master module, featuring multi-band end-of-chain processing with EQ, compression and mid/side stereo widening effects. Ideal for bass or guitar.

Supplier's Notes:
On-stage mastering

Based on Endorphin.es' Golden Master eurorack module and our experience in electronic live music performances, Endorphin.es developed Golden Master - a multiband processor pedal to deliver high pressure audio for live concerts and venues: sound loud without overloading the master limiter.

Multiband processor consists of EQ, compressor and mid-side

24 bit 96 kHz audio I/O with 32 bit internal processing

Stereo enhancer for each of the 3 bands

High impedance inputs, pseudo-balanced outputs: works also as a DI-box on stage

One knob compressor per band along with global threshold allows you to intuitively achieve results

Dedicated expression pedal for master volume control

Two footswitches let you select presets and bypass with your feet

Notes: Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: The Shaped Dual EnvVCA is a two-channel analogue envelope generator with waveshapers and a stereo linear VCA. Unlike conventional analogue envelope modules, the waveform of each envelope can be controlled with a slider or CV without changing the envelope timing. With a wide time range from an hour to 2.5kHz, and a plethora of CV inputs and attenuverters, it can be used as an LFO, audio-rate oscillator, slew limiter, waveshaper, ASR/ADSR/complex EG, independent audio/CV VCA, envelope follower, sidechain processor, and general utility module. Each channel has dedicated linear outputs plus attenuverters and offset controls for the variable waveshape outputs, making it an ideal modulation source and stereo VCA.

100% analogue

Shaped Dual EnvVCA

20HP Eurorack format module
0.95" (24mm) maximum depth (includes power cable)
10-pin Eurorack power header

Power consumption
+12V: 255mA
-12V: 230mA

Audio/VCA
100k input impedance, 1k output impedance, DC-coupled
VCA gain range: -90dB to +2.0dB, linear response to CV from 0V to 5V
VCA unity gain: 4.4V CV
DC to 20kHz, +/-0.1dB

Envelope Times
Minimum rise or fall time: ~200us per segment (2.5kHz max frequency)
Maximum rise time: >20 minutes (typically > 40 minutes)
Maximum fall time: >12 minutes (typically > 20 minutes)

Jacks:
Env jack: Min = -10.2V, Max = +10.1V, maximum amplitude 9.3Vpp
Trigger jack: rising edge threshold = 1.25V
Follow jack: active range = 0V to +5V

EO* jacks:
EOR (channel A): <80mV low to >4.50V high gate output
EOF (channel B): <80mV low to >4.95V high gate output
Minimum stable pulse width: 1ms. Shorter than this may produce extra 50us pulses
Audio In/Out jacks: -10V to +10V maximum range without clipping

Notes: Monolith is a pitch-shifter reverb inspired by west coast synthesis techniques. It utilizes a time-domain based FM algorithm that acts as a shimmer.

Inputs:

In L and In R - audio input, left will be converted to stereo if there is no right input
Blend - knob and CV for controlling the fade between the dry and FM audio signals
DJ filter - knob and CV for controlling the reverb delay line filtering
Wet - knob and CV for controlling the reverb decay
Mod - knob and CV for controlling the scale of FM modulation. Low mod values correspond with microtonal pitch regions. High mod values correspond with multiple octave shifts.
On - button and CV gate for toggling on/off FM modulation. When FM modulation is turned on/off, the FM modulator oscillator is reset.
Quant - button and CV gate for toggling on/off FM pitch quantization.
Freq and v/oct - knob and CV for controlling the frequency of the FM modulator oscillator. Also control reverb pre-delay.
Shape - knob and CV for controlling FM modulator oscillator shape. Shape wavetable transitions from sine wave (8 o'clock) to triangle wave (12 o'clock) to square wave (4 o'clock).
Clock - CV gate for tempo syncing modulator oscillator period.

Outputs:

Out L and out R - audio output
Gate - CV gate out that is period synced with the FM modulator oscillator

100 mA +12V 40 mA -12V
14 HP 35 mm deep

Notes: In the high woodlands of the north, undiscovered by most inhabitants, there ruled a clan of old, mystic Treefolk. On the first new moon of spring, these Treefolk could be heard grafting limbs to grow their young - splicing bits of branches from each generation to produce the next line of Treefolk. These new beings keep the lifeblood of all who came before in their new skin. These sounds are in part very old, but in part very new. They are referred to as... Fable.

Let your storybook adventure grows with the Fable Granular Soundscape Generator. The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds. The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analogue feedback path. Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms.

So, what exactly is this granular effect and why is it a magical experience when combined with delay? Granular is a digital processing technique of micro-sampling, wherein short samples called grains are read from a delay buffer. In the Fable, players can adjust these grains by manipulating their sampling length, position, and buffer size from which they're read. They can be played at double or half speed for pitch shift and time stretching effects, play them in reverse, read from multiple positions, and more, in order to achieve different effects.

It's a powerful but complex technique and Walrus Audio created five streamlined programs in the Fable that explore different aspects of its sonic range.

Programs

I. Reverse Delay into Reverse Granular

Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Reversal and re-reversal build up in the feedback paths, creating a complex and organically shifting soundscape. Turn grain size down for long, smooth reversed transients, and grain size up for stuttering reverse glitch madness.

II. Forward Delay into Octave Up Granular

Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Swarms of double-speed grains build up in the feedback path for bright and airy cascades of sound.

III. Analog Delay into Octave Down Granular

Program 3 runs a warm, dark analogue-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Slowed down repeats combine with analogue-style processing to create deep, thunderous footfalls and thick, murky ambience.

IV. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)

Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Multiple points of sampled sound build upon each other in the feedback paths to create glitchy clouds and unique organic reverberance. Time in this program controls time-stretching of both granular algorithms, changing both the length and tonal character of the granular effect.

V. Forward Delay into Randomized Pitch Granular

Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. Pitch changes with each new grain, so play with the X knob in this program to control the rate of randomized pitch modulation.

Granular soundscape generator
Unique soundscapes ranging from smooth ambience to bizarre reverberance to chaotic glitchy swarms
Powerful dual DSP architecture with individual feedback paths
Combine delay programs in series with granular sampling algorithms
5 programs centered around sample and chop delay algorithms
Program 1: Reverse Delay into Reverse Granular
Program 2: Forward Delay into Octave Up Granular
Program 3: Analog Delay into Octave Down Granular
Program 4: Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)
Program 5: Forward Delay into Randomized Pitch Granular
Manipulate sampling length, position and buffer size of grains (short samples)
Play grains at double- or half-speed, reverse or from multiple positions to achieve different effects
Tap Tempo switch
Top-mounted Input and Output
Coated in a slate grey enclosure with white, black, cream, red, and orange ink
9-volt DC, Centre Negative, 300mA minimum
Buffered bypass
Power supply not included.
Designed and assembled in USA

Notes: Once upon a time, in a fairy tale world, there stood a hidden forest. On the eve of every full moon, magical and delicate sounds of light were heard bouncing and reverberating through the trees. These sounds carry artifacts of notes moving backward and stretching through time. They are referred to as, Lore. Walrus Audio is excited to announce their next experiment into ethereal ambiance called the Lore Reverse Soundscape Generator. Made up of five different programs, each utilizes different combinations of delay and reverb that feed into each other for time-warping ambient creations. to create the soundtrack to your storybook adventure. Featuring two DSP chips running in series, each with their own analogue feedback path, the Lore takes you on an adventurous journey rich with themes of reversing, time-stretching, pitch-shifting, and vast ambiance.

Explore vast time stretching and reverse sounds with five different custom programs:

I. Reverse Delay into Reverse Reverb
II. Reverse Delay into Octave Up Reverb
III. Reverse Delay into Octave Down Reverb
IV. Reverse Reverb into Forward Reverb.
V. Pitch Delay into Pitch Delay.

Further explore the Lore with momentary features for adjusting modulation speed and a time warping effect that can shift the clock rate up or down, giving a rising or sinking effect. The Lore comes coated in a muted green enclosure with cream, orange, brown and dark green ink with art by David Huttner. The die-cast enclosure's exact size 9,2 cm x 12,2 cm x 5,72 cm including knobs. Power requirements are 9VDC, centre negative (300mA minimum).

Dimensions and power consumption: 9,3 x 11,8 x 5,6 cm (W x D x H)
300 mA

In the box:

Walrus Audio Lore
Manual
Sticker
Guitar pick
Pouch

Notes: Stellar edition of the fantastic MicroFreak adds new features as well as a limited-edition paint job. Digital voices feed into the analogue filter to create a versatile hybrid sound engine.

Supplier's Notes:
MicroFreak Stellar is a hybrid synthesizer that combines digital oscillators, analogue filters, quirky modulation, a uniquely flat PCB keybed, and expressive sequencing with a subtly out-of-this-world aesthetic design.

Interplanetary synth explorer

Discover the same loveable hybrid beast that sent the synth world into a spin, but primed for launch and ready for an interplanetary sonic voyage. MicroFreak Stellar features the same inspiring, bonkers sound but embellished with a unique space-age design.

Digital, wavetable, sampling, granular...

Treat yourself to only the weirdest & most wonderful paraphonic synth sounds with MicroFreak's multimode sound engine. Choose from numerous algorithms, including Wavetable, Chord, 4 new Sample & Granular engines and many more, and immediately customize your patches with 4 intuitive con-trols and real-time visual feedback.

Multi-mode analogue filter

Unlock truly unique hybrid tones by combining MicroFreak's digital sound engines with a crunchy resonant analogue filter, inspired by the classic Oberheim SEM. With low-pass, band-pass, and high-pass modes, you can make this 'Freak whisper, scream, or launch into self-oscillating orbit.

Modulation matrix

Quickly rewire MicroFreak's architecture and delve deep into complex sound design with its modulation matrix, offering up to 7 simultaneous destinations and 5 sources, including an ADSR envelope, cycling envelope, and 6-shape LFO.

Sequencing & randomization

Blur the lines between sequencing & arpeggiation and create spontaneous melodies, motifs, and rhythmic patterns on the fly. MicroFreak encourages musical exploration, expression, and evolution with its unique Spice & Dice randomization feature, ribbon controller, and 4 lanes of automation.

A unique keybed

Change the way you play and unlock fresh musical expression with MicroFreak's distinct PCB keyboard. It's flat, it's fast, and it's fit for everything from lightning-fast solos to instant arp creation; not only is it pressure sensitive, but it offers poly-aftertouch too!

What's in the box

Box content

MicroFreak Unit
Universal PSU
Registration card
2x MIDI port adapters

Instrument dimensions

Size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Weight : 2.3 lbs. (1.02 Kg)

Notes: The Variable Q VCF (or VCFQ, for short) from Random Source is a skiff-friendly Eurorack adaptation of what is perhaps the most famous Serge filter. It is an effortlessly thick and colorful 12dB/oct multimode filter with ultra-smooth resonance that never ceases to amaze. Amazing tonal variety comes from combining outputs, automating resonance settings via CV, and adding grit using its adjustable-gain input.

Simple filtration is only one of the VCFQ's many uses, however. Its amazing trigger input turns rising-edge pulses into thick analog kicks and toms which roughly track notes thanks to a dedicated 1V/oct input. This module also becomes an ultra-powerful modulator in "Lo" mode, with decaying/syncable LFOs well within grasp using the trigger input, along with free-running oscillation when self-patched. When fed stepped sequences, sample and hold, or other LFOs, the VCFQ can even function as an effective slew limiter. And that's not all: for those lucky enough to own two VCFQs, dual-peak resonance and an ultra-thick 24dB/oct low-pass mode offer some of the most rewarding synth sounds in existence. In short, adding a VCFQ to one's Eurorack system is always worthwhile.

Features

Analog multimode filter designed in collaboration with Serge Tcherepnin
Automatic Gain Compensation and Variable Gain audio inputs
Trigger input
1V/oct and attenuverted frequency CV inputs
Attenuated Q CV input
Low Pass, Hi Pass, Bandpass, and Notch outputs
Hi/Lo range switch
This is the skiff-friendly, SMD version of the Random*Source VCFQ

Under licence from Serge Tcherepnin
Designed for High-end VCAs (THAT2180)
No matching of transistors required
No wiring needed

Dimensions
14 HP
26 mm deep

Current Draw
52 mA +12V
52 mA -12V

Notes: The ideal all-in-one portable PA system for live performances and DJ use. A versatile combination of mic and instrument inputs, with an internal battery for wireless use.

Supplier's Notes:
Portable battery powered speaker for performing musicians

Premium Portable Sound

The Alto Professional Busker is the battery-operated PA for the active on-the-go musical performers who demand top-tier sound in a portable solution that will be at home on any stage. With its optimized woofer and tweeter pairing for 200 watts of output, Busker delivers clear, focused sound that makes your music shine in any environment. Connect your mics and line level instruments or devices with the integrated 3-channel mixer with easily accessible control knobs to dial-in volume without stopping the music.

Powerful and Polished Performances

Give your vocals or guitars some extra shine and polish with the built-in Alesis FX processing for world class sound in even the most intimate settings, complete with dedicated knobs to adjust amounts independently. Busker features Bluetooth on Channel 3 to wirelessly

Your Way to Play and Perform Anywhere

200W of powerful, portable sound with 6.5"(165mm) woofer and 1" (25mm) tweeter
Battery Eco Mode for increased performance up to 24 hours
Compact, lightweight design that's easy to transport

Must-Have Creative Connections and Controls

Free Alto App (iOS/Android) for remote configuration and control
Bluetooth music streaming direct from your device
Integrated 3-channel mixer with built-in Alesis FX
2 XLR/TRS "Combo" inputs (for mics, instruments, & line level sources)
Aux input for non-Bluetooth devices

Sit, Stand, or Expand Your Busker

Versatile tilt or stand design for any setting
Use standalone or on a pole with DSP Speaker Use modes for tuned sound
Link two Buskers wirelessly via Bluetooth for stereo playback
Flexible horizontal and vertical monitor positions

All information subject to change altoprofessional.com stream backing tracks from your smart device. Play rhythm tracks while you jam along or rehearse with your favourite metronome app to keep your fingers loose before showtime. While you have your smart device out, pull up the free Alto App for iOS and Android to quickly load your favourite configuration settings. An available 1/8th AUX input means you can connect your favourite sound sources like drum machines or groove boxes to keep you on beat with one simple connection.

Road-Tested, Always Ready to Roll

Busker is built to travel from gig to gig seamlessly with a compact footprint that retains enough heft to pump out tight, punchy sound.

A rugged, durable exterior will stand up to the grind, while delivering the sound performance you can count on, night after night. Set it vertically on stage to enjoy accurate amplification, lay on an angle to project towards you, or pole mount it to keep your audience on their feet and immersed in your tunes. A dedicated XLR out enables a direct line to FOH or other destinations for those bigger gigs, all the while letting you enjoy your familiar custom-tailored sound up close and personally.

Long Lasting Battery

Maximize power in between charges with Battery Eco Mode, providing up to 24 hours of performance power. The Alto Professional Busker brings big sound to the best performers.

Technical Specifications

Output Power
Eco Mode: 50 W (peak)
Standard Mode: 200 W (peak)

Drivers
Low-Frequency: 6.5" (165.1 mm) woofer
High-Frequency: 1.0" (25.4 mm) tweeter

Max SPL 106 dB
Frequency Response 60 Hz - 20 kHz

Connectors
(2) Combo XLR-1/4" (6.35 mm) Inputs
(1) 1/8" (3.5 mm) AUX Input
(1) USB Charging Port
(1) XLR Line Out
(1) RCA Line Out
Charge Port 5V, 2.1 A

Bluetooth Specifications

Profile: A2DP, AVRCP
Version: 5.0 Codec: SBC
Frequency: 2402 - 2480 MHz Maximum Transmission Power: 10 dBm
Protocol: BLE
Range: 100 ft. (30.5 m)

Battery
Type: 6.6 Ah, 12 V, Lithium Ion
Life: Eco Mode: up to 90 hours; Standard Mode: up to 30 hours
Charging Time: 12 hours

Power
Connection: IEC
Voltage: 100-240 VAC, 50/60 Hz, 120 W; 220-240 VAC, 50/60 Hz; 120 W
Fuse: 100-120 V, T1.6AL AC250 V; 220-240 V, T0.8AL AC250 V

Notes: This new device is a powerful new CV controlled effects unit for your electronic music setup and pairs extremely well with the KOMA Field Kit.

- Looper
- Frequency Shifter
- Sample Rate Reducer/Bitcrusher
- Digital Delay
- Analogue Spring Reverb
- 4 Channel VCA Mixer
- 4 Step Mini Sequencer
- Envelope Generator

All of this, combined with the new 4 Channel CV Interface which allows you to route four CV signals throughout the device, means an incredible control over sound and timbre and a great addition to your mobile performance rig.

The Field Kit FX is built up from 7 separate functional blocks all focused on mangling and changing incoming audio and CV signals. They are designed to operate together as a coherent addition to our Field Kit Electroacoustic Workstation or alternatively together with other pieces of music electronics with the ability to use control voltage signals.

Notes: The updated Chronoblob offers versatile, creatively interesting delay. Four modes offer a choice of stereo settings or mono with patchable feedback send and return. Tape-style modulation allows for fun pitch bend effects.

Supplier's Notes:
Chronoblob2 is a digital delay module!

Just like his little brother, Chronoblob2 can sync to a clock signal. Patch one into the SYNC input and choose a multiplier or divider for rhythmic delays. Or leave SYNC unpatched for access to continuously variable delay times!

Chronoblob2 offers four different delay modes! Dual delay mode provides two separate delays with shared controls. Ping-pong mode extends this intermingling even further by placing each delay in the feedback loop of the other.

Single delay is the classic Chronoblob mode with feedback SEND and RETURN. Patch in a lowpass filter for smooth, shadowy echoes, or get weird with a wavefolder or any other effect! Cascade delay mode expands on this archetype by also placing the second delay inside the feedback loop of the main delay, creating a wild multiplying echo effect.

Chronoblob2 provides control voltage inputs for TIME, FEEDBACK, and DRY/WET, and bipolar attenuators for each so you can dial in just the right amount of control.

In Dual and Ping-pong delay modes, although both delay times are controlled by the main TIME knob, you can voltage-control each independently with the two TIME CV inputs. The right TIME CV is normalled to the left one so you can easily control both with the same signal. Additionally, the left TIME CV is normalled to five volts, allowing you to use the attenuators as offsets from the position of the main TIME knob.

Also in these 'pink' modes, the right audio input is normalled to the left input, and the right audio output is normally mixed into the left output (patching into the right jack breaks this connection).

Like the original Chronoblob, you can select the style of time modulation with the slide switch. Choose tape mode for sweeping pitchbend effects or fade mode for smoother, cleaner changes.

Chronoblob2 offers an INFINITE LOOP button and gate input to shut off the delay inputs and lock the feedback at 100%.

Specifications:
Audio: 16bit, 48kHz
Delay: 5ms to 2.73s
Power: +12V: 80mA, -12V: 15mA
Width: 12HP
Depth: 30mm (including power connector)

Includes power cable and Befaco Knurlies M3 mounting screws.

Notes: Ten channels, digital effects, USB audio interface plus reliable Allen & Heath build quality. A whole lot of mixer in a compact format.

Supplier's notes:
Hybrid compact mixer / 4×4 USB interface with FX:
ZEDi-10FX combines the robustness and hands-on control of an analogue mixer with a high quality 4 x 4 USB interface and an outstanding multi-model FX unit, making it a perfect all-round choice for musicians, recording artists and venues. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZEDi-10FX is a versatile companion for every step of the creative journey.

The studio quality, 24-bit / 96kHz, 4×4 USB interface makes it easy to capture stunning multitrack recordings direct from the mixer to a Mac or PC without the need for any extra equipment. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. ZEDi-10FX includes a specially created suite of studio quality reverbs, delays and special multi-model FX, crafted by Allen & Heath's acclaimed in-house effects aficionados. Guitarists will be pleased to know that two of ZEDi-10FX's mono channels feature Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

Mixer + USB interface
ZEDi-10FX offers the best of both worlds, incorporating a studio quality 4 in / 4 out, 24-bit/96kHz USB audio interface for hassle-free multitrack recording and playback to/from a Mac or PC, or to an iOS device using the iOS camera kit. The USB output source can be set up in several different ways to match your workflow.

Cubase LE Music Production Software included:
ZEDi-10FX comes with the acclaimed Cubase LE software. Cubase LE offers powerful yet easy-to-use software tools for audio recording, editing, MIDI sequencing and mixing. Its vast range of proven editing and sequencing tools can be used for a large range of music styles and areas of application. From singers and songwriters recording vocal lines to rock bands jamming in their rehearsal room, Cubase LE is as easy as it gets - with outstanding audio quality as well as time-saving recording and editing functionality.

Cubasis LE Mobile Music Production app:
The mixer also comes bundled with the Cubasis LE app. Cubasis LE is the compact version of Steinberg's streamlined, multitouch sequencer for the iPad, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze.

ZedFX multi model:
ZEDi-10FX boasts a brand new suite of studio quality reverbs and delays, painstakingly crafted to enhance your recordings and performances. Special multi-model effects provide uniquely dynamic combinations of reverbs and delays.

Exceptional audio quality:
ZEDi-10FX features an exceptional new preamp design, created by analogue guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analogue range is famous for. For tonal shaping, the precise 3 band MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

Road tough:
All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

Made for guitars:
ZEDi-10FX comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

It's an Allen & Heath:
Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: Arturia's 88-key controller is designed for those who place the emphasis on keyboard quality and feel. Piano-style hammer action makes it a nice choice for serious players.

Supplier notes:
Creating music in the digital world can be difficult. So many options, so many new things to learn. KeyLab Essential lets you focus on what's important.

8 pads, 9 rotaries, 9 faders, and an expressive keyboard, but so, so much more. Music is at the heart of this controller. Every aspect of KeyLab Essential has been carefully chosen to give you the best possible experience when creating and performing. KeyLab Essential makes navigating inside your recording software a breeze thanks to the dedicated DAW Command Center, and makes browsing your presets an exciting and inspiring experience.

Spend less time with a keyboard and mouse, and more time creating, performing, and playing.

The KeyLab 88 is a professional-grade 88-note MIDI keyboard controller designed with the working musician in mind. Featuring a new hammer-action keybed from Fatar and deep integration with our award winning Analog Lab software, the KeyLab 88 is unique with its robust, solid metal construction and classic wooden side panels.

An extensive array of controls, a stylish yet amazingly lightweight design, and brilliant integration with laptops and tablets: KeyLab 88 is perfect for modern keyboard players, pianists, demanding stage performers, and professional producers who will not compromise on quality. KeyLab 88 sets a new standard in professional controller keyboards.

As a professional hybrid synthesizer, KeyLab 88 offers the immediacy of a hardware synthesizer combined with the flexibility of a software-based solution.

Thanks to the top quality, hammer-action Fatar keybed, the KeyLab 88 is the ideal companion for demanding performers.

Notes: Revised take on the excellent Benjolin dual oscillator and filter from Rob Hordijk, featuring the 'rungler' stepped CV generator and extensive output options.

Supplier's Notes:
Benjolin V2 - Rob Hordijk's latest revision of the classic Benjolin. The core of the Benjolin continues to be two oscillators, the rungler (stepped CV generator), and a multimode filter.

This latest revision adds:

Reworked oscillator and filter sections

All levels are adjusted to eurorack standards

Two different steps modes (8/16 and 127)

Double and single clock rate

Externally clockable

External filter input with blend control

Notes: Fusion VCO2 is a full analogue sound source with lots of distinct features.

The core of the module is highly stable AS3340-based VCO with three simultaneously available waveforms, transistor-based suboscillator and detune function - two BBD delay lines that make frequency shifter that is mixed back to the principal oscillator in order to emulate two detuned VCOs. Tube crunch - distinct tube overdrive - is added on the top of the mix. Furthermore, Audio input mixes an external audio signal with the principal oscillator which results in crazy sonic experience. Fusion VCO2 is exactly what you need, if you wish to get really low frequencies and have a sound that sets your modular system apart from mass!

Features:
" Full analogue design
" Great tracking over 8 octave range
" Detune function for thickening the sound
" -1 oct transistor based suboscillator
" Tube overdrive circuit
" External audio input
" VCO synchronization
" Simultaneous waveform outputs

Dimensions
14 HP
42 mm deep

Current Draw
228 mA +12V
55 mA -12V

Notes: The Raster is a digital delay with a pitch and frequency shifter integrated into the feedback loop. Forward or reverse delay can be shifted once or have continuously shifted repeats. It delivers a wide range of sounds including modulated and harmonized delays, reverse delays, chorus, arpeggios, infinite descents, chaotic self-oscillation, and continuously evolving soundscapes.

The core of the Raster is a clean delay with up to 1600 milliseconds of delay time. Three delay ranges allow you to precisely dial in resonant feedback sounds and instantly change delay time with rhythmic shifts. The feedback control has infinite repeats at 3 o'clock and chaotic, textured feedback loops at higher levels. Knob responses are carefully tuned for exploration of self-oscillation and feedback on the verge of blowing up. A tone control sweeps from dark analog-style repeats to digital clarity and emphasizes the attack at higher settings. The left and right delay times can be set as a ratio, so a single knob changes both in sync. The two delay channels can be arranged in series, parallel or ping pong.

Pitch shifting repeats up or down in semitone steps creates tempo-synced arpeggios and alien organ sounds. The detune setting can dial in micro pitch shifts and chorused repeats. The left and right channels can be shifted by the same amount, a ratio, or opposite directions. At subtle settings, repeats evolve in a way that sounds natural, but different from analog delays.

Beyond pitch shifting, a combination phase/frequency shifter creates subtle evolving repeats, dissonant harmonies, and barber pole flanging. It can be pushed to extremes for ring modulation and inharmonic shifted delays that distort and break apart.

The Raster's modulation section has seven waveforms that can be assigned to delay time, pitch shift, or effect level (for tremolo). There are two random waveforms for glitchy pitch jumps, wow and flutter, and broken tape deck effects. Envelope and inverse envelope enable dynamic flanging and pitch bent delays. Stereo controls adjust the modulation amount and phase between channels, for subtle shifts or swirling psychedelic washes.

Capable of extreme sonic mayhem, the Raster can also be used with restraint to add unique character to your sound.

The Raster 2 is performance friendly, with 6 knobs and 9 switches. The original Raster was praised for its knob response and immediacy, and the Raster 2 maintains that simplicity while adding flexible modulation and extensive stereo functionality. Alternate knob settings are related to the primary knob function, labeled, and off at the center position. Both footswitches can be latching or momentary, for instant pitch jumps or quick blasts of echo. The bypass switch can also mute the output in bypass while always listening, to catch, repeat, and manipulate what you just played.

While designing the Raster 2, we wanted to enable as many classic rack mount digital delay tricks as possible while keeping the fast and intuitive control that made the original Raster so fun to use. Instead of multiple modes with generic knob names, all of the parameters are always available, so you can mix and match different effects and explore new sounds in between.

Size: 3.05" x 4.75" x 2.5"
Input impedance: 1 MO
Output impedance: < 1 kO
Bypass: analogue buffered
Power: 9 VDC, center negative
Current: 250 mA

Notes: Mess with time and space in real time with this impressive pitch-shifter and time-stretcher. Reverse and tape stop effects, looping, randomisation and much more, with optional expression and MIDI control.

Supplier's Notes:
The Tensor gives you live reverse and tape stop effects, pitch shifting, time stretching and hold functions that you can combine in creative ways. Slow down, speed up and rewind in real time. Stretch or compress time with no pitch change. Loop, overdub, and randomly slice phrases up to 9.4 seconds (4.7 seconds in stereo).

Intelligent randomization adapts to the knob settings. The results range from occasional CD skips, stutters, and rhythmic repeats to random slicing and erratic pitch shifts. Both foot switches have momentary and latching modes to inject pitch jumps, glitches, or instantly rewind what you just played.

The Tensor is in a pedalboard-friendly enclosure with all jacks on top. All controls are immediately accessible with well-spaced knobs for live tweaking, and USB MIDI for recording and sequencing.

Listen to music written around the Tensor: Tensor Tracks on bandcamp

New in firmware version 1.1:

Loop sampler functions (retrigger / stop / one shot) via MIDI or remote switch
31 presets via MIDI or remote switch
Expression pedal assignable to any knobs
Improved MIDI scaling for speed, time, and pitch
Kill dry mode (always mutes dry signal)

Size:3.05" x 4.75" x 2.5"
Input impedance:1 MO
Output impedance:< 1 kO
Bypass:Analogue buffered
Power:9V DC, center negative
Current:250 mA

Notes: Really versatile little MIDI controller designed to add hands-on control to software and even hardware. 16 push-button rotary encoders plus function buttons and OLED display.

Supplier's notes:
This all-rounder has 16 gridless push-encoders, 7 function buttons and a large OLED-display. Encoders are switchable to 16 groups that allow controlling a total of 256 control parameters per setup. The display shows the current values of all controls or editable encoder/group/setup names. Various kinds of MIDI commands are possible, like program change, pitch bend, aftertouch, NRPN, and control change in relative and absolute mode with different acceleration amounts. All these properties are easily and efficiently programmable on the device, allowing personalized customisation for each separate control.

The encoders can work as high resolution 14bit controllers too (NRPN, control change or pitch bend). This makes them suitable for sensitive parameters like resonating filter cutoffs, etc.

Use the internal 16 setups to save your individual settings. Backup and restore of all settings by SysEx dumps are possible too.

The factory settings are perfect to control music and video software products out of the box. Thus, any additional device programming isn't necessary for many applications.

The little box is also a great extension for your Ableton Live setup. There you can control all the continuous parameters like track volumes, rack macros, send amounts, and track pannings. A special control surface script for Ableton Live, including all necessary mappings, is enclosed in the package.

Working with this amazing power box will prove to you that it is a trustworthy, reliable, and invaluable asset to your productions.

Notes: The successor to Eowave's Fluctuations Magnetiques module is an even more advanced quad analogue filter, designed for cross modulation, complex routing and self-oscillating fun.

Supplier's Notes:
The Tempete Magnetique is a fully analogue complex filter/synthesizer module.

It was that was created as an evolution of the "Fluctuations magnetiques".

More than a mk2, Eowave designed it to push you to play with one of the most interesting things in modular synthesis: to divert the primary usage of a module to create unexpected and new sounds (aka this is not only 4 filters)

Tempete Magnetique is deeply inspired by the classical filters design as well as West Coast synthesis complex oscillators.

At it's core, has 4 multi-mode 12db filters that can be chosen to be routed in series or parallel, which can be used independently or combined and even cross-modulated, controlled by CV or with an integrated envelope follower (which can be used as a dynamic responsive envelope) and even pinged.

The Tempete Magnetique was designed to have several levels of use. The individual level with the use of separate filters, perfect for quadraphonic processing of different sources (A B C D).

The pair sections which allows for more complex stereo effects or to generate synthesis voices (X, Y) and finally, the global level with a cross-modulation of filters.

The independent outputs have been designed to be fed back into their input, turning them into oscillators (not really precise one, but you can make synth voice kind of V/Oct tuned with their very own sound, due to the fully analogical design, these oscillators may have strange behaviours sometimes, but this instability will bring you the warmth of analogue gears).

The pairs sections, of course, can filter an incoming signal, but can be transformed to full synthesis voice, percussion engine (exited by the ping input and modulated with the envelope follower) and way more.

This filter allows for anything from gentle, subtle filtering to a storm where the undulations of your sound and their intensity create new types of textures.

Main features:

Four independents or linkable multi-modes 12 db filter
Envelope follower who can act as end decay envelope sensible to the velocity
Cross modulation engine who modulate both pair of filters
Ping input
Outputs with phase correction to be fed to inputs

Some applications:

Filtering (obviously), can be used for quadraphonic or stereo filtering
Weird synth voice
Waveshaper
LFOs/oscillators generator
Crossover
External rhythm following - auto filtering
Drum generator

Technical details

22hp
Skiff friendly
Reverse power protection

Notes: Neat little interface module to help pad controllers play nicely with Eurorack. Hook up a device like a Launchpad or APC and jam out rhythms with retriggering options, dynamic control and MIDI sync.

Supplier's Notes:
Triggerpad is a dynamic trigger/gate sequencer in eurorack format on only 6hp. A USB MIDI controller with an 8×8 grid like Launchpad or APC is used to display and edit the patterns (see the list of compatible controllers). The user experience is tailored to live performance and detailed composition: dial in simple rhythms or complex polyrhythms, retrigger at audio rate, create dynamic percussions with velocity triggers or use longer pulses to create steppy modulations.

By using USB MIDI controllers that you might already have and maybe not use anymore, we avoid producing more plastic. Give your old gear a second life!

Dimensions & consumption

Width: 6hp
Depth: 39mm
+12V: 120mA (without USB MIDI controller connected)
-12V: 20mA
5V: 0mA
USB MIDI controllers consume up to 150mA on +12V

Connectivity

8 dynamic trigger/gate outputs (0-10V)
USB MIDI Host
Clock in
Clock out
Reset in
Reset out

Compatibility

Launchpad Pro Mk3
Launchpad X
Launchpad Mini Mk3
Launchpad Mini Mk2
Launchpad Pro
Launchpad Mk2
Launchpad S
APC Mini Mk1
APC Mini Mk2

Notes: With Melee, Walrus Audio have given you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less-is-more approach, Walrus have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out there.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs
The Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by David Huttner.
The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes: DSP, DSP+True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

High-Gain Distortion and Reverb combo
Controls: Vol, Tone, Decay, D>R|R>D (determines order of effects), Joystick (distortion level + reverb mix), bypass, sustain switch
Joystick control to meld reverb and distortion and inspire a wealth of creative output
Joystick controls reverb mix (x-axis) and distortion level (y-axis)
Switch signal-chain-order of distortion- and reverb-effect
D>R (distortion into reverb) or R>D (reverb into distortion)
D>R mode: traditional set up. Notes and chords remain their clarity
R>D mode: notes and chords are muddied to create a wall of sound
3 different reverb programs: Ambient, Octave and Reverse
Ambient Reverb: Huge reverb with massive trails
Octave Reverb: Lower octave on reverb trail. Like "Dark" mode on Walrus Audio Slo.
Reverse Reverb with Feedback: Add reversed reverb trails or push into reverse feedback overload.
Tone 3-way-toggle-switch sets the tone of reverb and distortion: normal, dark, bright
Decay 3-way-toggle-switch sets time of the reverb: minimum, medium, maximum
Set modulation via secondary control (decay 3-way-switch): none, slight (33RPM), high (45RPM)
Use momentary bypass to create a moment of texture
Sustain switch ramps up reverb trail to maximum or latches current reverb decay
3 bypass modes: DSP bypass, DSP+ true bypass, true bypass
9-volt DC, Centre Negative, 200mA minimum
Power Supply not included
Designed and assembled in the USA

Notes: The uniK 05+ is the result of extensive development work performed in Germany, defining a new quality level in its class. With its new 5" kevlar low frequency driver and a new custom engineered and powerful high frequency magnetostatic tweeter, the uniK 05+ offers many improvements over our successful uniK 05 and will easily become an important part of your studio setup with its clear and strong sound image.

What makes uniK 05+ unique?

The uniK 05+ studio monitor offers true full range quality with extended low end in a small case and an entirely new signal processing and amplifier unit with a perfect order low-z and low noise design. Mos-Fet Bi-amplification ensures a high slew-rate and fast setting, featuring true analog vintage sound processing with LC-like gyrator technology for a stressless and silky sound.

A completely new feature is the unique one knob sound character adjustment from smooth to bright, allowing you to change parameters for every room and preference. The additional high resolution High and Low switches add additional control. And of course the uniK 05+ studio monitor features a real precision gain attenuator, instead of a simple volume control.

The new design of the crossover ensures an excellent phase response and safe power limitation, driving the woofer and tweeter in phase for optimal step response. The tweeter features a newly upgraded magnetostatic design with extremely low moving mass for extended frequency and fast transient response and high sound resolution. The matching woofer consists of a kevlar composite cone with high stiffness ensuring better piston motion and excellent low-end sound reproduction.

Another new feature is the flexible rubber feet with discrete height adjustment. They are not only helpful to reduce unwanted vibrations, but also allow you to tilt the speaker towards the precise listening point - a great feature for typical near field applications.

Other new special features that are not standard in this class are standby to save power consumption (can be disabled) and a ground lift switch.

And with its copper colour woofer cone and the high quality matte cabinet finish, it looks quite uniK, too!

Notes: We have to admit being more than a little proud when thinking of the Action Filter's history. Twelve years ago we made the first version of this still popular stereo-filter with no end in sight. It still is built upon the same basic principle: ACTION!

Neither MIDI nor control voltage decide about filter sweeps and cues but you. Action Filter demands and supports your intuition and creativity. Reign over frequencies and rhythm instead of being a victim of technique.

What remains?

Like its predecessors, Action Filter 4 consists of a high-/lowpass filter-combination per stereo channel. Together, these either work as bandpass- or notch-filter with variable bandwidth and individual resonance per filter.

What's new?

Unspectacular but a spectacle nevertheless: Beside the mandatory RCA in- and outputs, Action Filter 4 is equipped with 1/4"-jacks. In addition, the FILTER MODE switch made it to the unit's front, labeled as STYLE.

Who is the Action Filter 4 dedicated to?

... of course for all action heroes! With jack- and RCA-connectors, Action Filter 4 is best suited for the DJ booth as well as for studio applications. You can use it to process full tracks or add that "certain something" to individual audio tracks. Emphasize or kill specific frequency bands and - on top of it - have lots of fun actively playing with frequencies! Simply: ACTION!