ダンスミュージック検索結果

Notes: Expand the lid from your case to be another powered rack. This set includes:

Rails
Handle and handle supports
Powered bus board
Case wiring
AC/DC power adapter
All hardware and thermal tape to complete the conversion

Notes: LOCUTUS is designed to interface Assimil8or with MIDI instruments, controllers, and sequencers to provide multichannel modulation and new polyphonic possibilities.

LOCUTUS includes a special attached cable to connect to the Assimil8or CPU behind the panel.

LOCUTUS is 6 HP wide and 25mm deep.

MIDI sources connected to LOCUTUS’ MIDI IN port can be used to modulate Assimil8or parameters using velocity, channel pressure, and MIDI CC (Continuous Controller) messages, select presets using MIDI Program Change (PC) messages, and/or optionally trigger Assimil8or channels with MIDI notes using user-selectable assignment modes. MIDI Setups can be configured with assignment modes including Dynamic, which intelligently cycles through Assimil8or’s channels to easily create polyphonic patches, Multi assignment modes ideal for playing multitimbral Assimil8or patches with MIDI sequencers, SP-1200 modes designed especially for triggering Assimil8or with SP-1200’s MIDI output, and more.

Locutus’ MIDI OUT port can be used to optionally transmit program messages when presets are changed and/or to send MIDI CC data based on the analog control voltages patched to Assimil8or’s 24 CV inputs. Using the new CV-to-MIDI options, Assimil8or and Locutus can be configured to control and modulate MIDI equipment using a eurorack modular system.

Notes: The Dual Stereo Gate (DXG) music synthesizer module is a Dual Stereo Low Pass Gate and Mixer. It follows in the footsteps of the QMMG, Optomix, RxMx, DynaMix, and LxD. Unlike its predecessors, the DXG is specifically oriented around mixing stereo signals, making it an important addition to any system containing modules like XPO, QPAS, Morphagene, Mimeophon, and other stereo modules by Make Noise or others.

Unique to the DXG is a new low pass gate circuit that does not use vactrols. This circuit is 100% analogue and its response was arrived at after many months tailoring it to meet or exceed the expectations that have been set by all the vactrol low pass gates that Make Noise has created over the years.

In the past, Make Noise produced the Dynamix module and Dynamics circuit in the 0-COAST, both of which are vactrolless LPGs; however, the DXG is a completely new approach which better implements the gentle single pole filtering of a low pass gate, while also emulating the slow decay and memory of the vactrol based low pass gate. This new circuit makes possible the consistency of response necessary for versatile stereo use, while also keeping the module small and affordable so that it can be a key part of just about any modular system.

As on all of Make Noise's low pass gates, the DXG's Control parameter is used to set both the amplitude and the frequency content of the sound that passes through it. The control parameter tends to open faster than it closes, imparting a subtle decay phase onto any envelope shape that is used to modulate it.

Unlike previous low pass gates made by Make Noise, all the DXG's inputs and outputs are stereo. Each set of inputs is normalled so that the left input can be used for a mono signal, sending a copy to both left and right outputs. The Auxiliary inputs are also a stereo pair with mono normalization. These normalizations allow for the DXG to be used as a simple three channel stereo mixer, with one or two of the channels additionally being used for dynamics control and note event generation. The Aux inputs can be used to chain together larger decentralized mixes using additional DXG modules, or X-PAN, Optomix, modDemix etc.

Features

- Make Noise's first Stereo Low Pass Gate

- Vactrol-free design for classic Low Pass Gate sounds, but with the balance and consistency needed for true Stereo

- Fully Stereo i/o for easy integration into a Stereo-equipped modular synthesizer

- All Left inputs normalled for easy use with Mono signals

- STRIKE Input allows use of Gate signal to trigger Low Pass Gate circuit, creating "plucking" or "pinging" sound from any Gate

- Summing stage with Stereo AUXiliary IN allows for chaining of multiple units, creating larger mixes

- Part of a decentralized mix console integrated throughout the system along with X-PAN, Optomix, XOH, etc.

- Pairs well with XPO, QPAS, Morphagene, Mimeophon, Spectraphon etc.

Width: 8hp
Power:
74mA @ +12V
86mA @ -12V
Module Depth (incl power cable): 43mm

Notes: New all CLEAR EDITION for the new Stokyo Record Mate Portable Record Player.

Portable turntable on the Columbia Portable GP series, reengineered with the original crew for an all brand-new construction (mainly internal parts, molds and arm assembly)

Classic adapter and tonearm function of playing records on the wall (upright)

Play 12-inch or 7-inch records (3 -inch records with the STOKYO 3"adapter) on RM-1 portable turntable w/ pitch adjust

Output via built-in "new improved" speaker or RCA output

Each unit is battery or AC powered (batteries not included)

This model is exclusive to North America at 120V, with the transformer included.

Product under limited warranty for 1 year of purchase from STOKYO and authorized dealers

Warranty is limited to the RM series only and not the domestic GP series in Japan.

A cool back story from one of the founders at STOKYO :

"The story goes back around 22 years ago when the good folks at Xexxn would allow me to distribute these on the low for diggers and DJs overseas.

A few years later we (STOKYO and friends) did have the opportunity to take over manufacturing but ironically I was also at Vestax and at the time we had the Handy Trax.

Fast forward to 2019, this project took over 2 years but with the help of some original engineers, our manufacturing partner and the love we all shared for the original GP/GMX we bring you the all improved version.

The RM-1 and RMX -1 "RECORD MATE" series is the overseas edition. (GP-3R/GMX-3R are the JPN domestic model)

Updated molds, internal board, parts, new speakers, new case/tonearm construction, magnetic stereo cartridge (like you'll find on an AT-LP60), but everything else like the OG. The first model will be exclusive for the Americas (@ 120v).

As we continue to improve more parts to clear Global compliances, we also await for more parts with supply issues due to the Pandemic for our Global/EU model we aim to make available later in '22.

For those who pre-ordered, we originally aimed for an earlier ship date and our sincere apologies with all the port congestion but good news, it is on stateside awaiting customs. Arriving soon.

Thank you for the patience.

Big up to the crew for making this happen, grinding everyday and for your love we have for vinyl."

Notes: HI POWER is Crazy Tube Circuits' next endeavour in pedal + amp-in-a-box overdrives recreating legendary sounds, following the success of Crossfire and Unobtanium.

It was inspired by the sonic combination of two British tone machines. The almighty Colorsound Power Boost meets the blistering high-headroom Hiwatt amp.

While the combination of these two units directly hints at the gear setup of David Gilmour and especially the gear used on Pink Floyd's album: Wish You Were Here (think the guitar solo sounds of "Shine on you Crazy Diamond", "Have A Cigar") the sonic options are endless.

The orange enclosure silicon transistor circuit (Colorsound Power Boost) can deliver from a transparent clean boost to an all-out fuzz driving a tube amp to sonic bliss. Crazy Tube Circuits set out to clone the original unit featuring the true-to-the-original spec BC184 transistors running on 18V DC (via an internal voltage booster circuit).

The ultra-flexible 2-band Baxandall EQ circuit can add bite and low-end rumble to any setup. Crazy Tube Circuits used a reverse log gain pot (labelled as volume), compared to the linear taper pot found in the original units and acted as an on/off switch, to be able to set the amount of boost/overdrive more precisely. While the earlier units didn't feature a master volume control (only as an aftermarket mod - Pete Cornish made an external unit master volume for David Gilmour's Power Boost) Crazy Tube Circuits chose to include one that is setup in a way so that when it is all the way clockwise it is bypassed. Later versions of the Power Boost had 9V power supply and were renamed as the "Overdriver" due to the lower headroom and their ability to drive the signal earlier. They were offered in a grey enclosure and can be seen in the gear setups of Jeff Beck, Marc Bolan, etc. Crazy Tube Circuits chose to incorporate this version as well with a flip of a toggle switch (PWR-ODR toggle switch).

On the left side of the HI POWER you will find an all-analogue circuit set out to emulate the sound and feel of a Hiwatt amp. Following the path of the famed British tube amplifier, this circuit offers authentic amp tone and feel resembling guitar tones from guitar greats like David Gilmour, Pete Townsend, Jimmy Page, Noel Gallagher to name a few. From the big bold high-headroom clean sounds to the face-melting crunchy tones.

True to the last detail, Crazy Tube Circuits have included the full EQ section along with a presence control located at the negative feedback of the power amp simulation circuit. A headroom toggle switch selects between the high headroom 100w power section provided by a quartet of EL34s (think Hiwat DR103), or the lower headroom and compression provided by a 50W power section with a pair of EL34s when hit hard (think DR504). Similar in operation to the original amps the master volume was designed to produce more gain at higher settings.

Crazy Tube Circuits taken the design a step further by adding a switch to select between input channels of the amplifier. You can select between the full response of the normal channel of the amplifier, the increased presence and tight low end of the bright channel input or the "Gilmour-ish" enhanced frequency response and added gain of those inputs linked together. This follows the modifications that Pete Cornish did to all David Gilmour's Hiwatt amps.

Like their other dual overdrive/amp-in-a-box designs, Crazy Tube Circuits also included a passive effects loop to give you the option to connect your beloved pedals between your booster/overdrive and amp in a box or use the two sections as separate and independent effects when using an external bypass switcher/looper. Gilmour enthusiasts will love to insert their Big Muff, Tube Driver and Phase 90 in there. Note that all pedals inserted in the passive effects loop are still in the signal chain when any or both sections of HI POWER are in bypass.

HI POWER features a power-up bypass/engage pre-set function for the footswitches. That way you can select which state your pedal will go to when you plug the power supply. This function comes in especially handy to people that use remote pedal switchers / loopers as they only set the state of the pedal once and then operate from the controller.

All-analog dual booster/overdrive - amp in a box.
Recreates the tones of the legendary setup used by David Gilmour in the recordings of Pink Floyd's Wish You Were Here album.
Right side: Faithful reproduction of the Colorsound Power Boost/Overdriver circuits with true-to-the-original-spec BC184 transistors.
Controls: gain, bass, treble, master, voicing toggle.
Wide gain range control: from transparent boost to gnarly and fuzzy overdrive.
Two-band (treble & bass) Baxandall EQ.
Master knob sets overall output. Huge amount of dB boost available.
Toggle switch to select between the 18V Power Boost style circuit or the 9V Overdriver style circuit.
Left side: Hiwatt AMP in a box overdrive.
All analog simulation of the preamp and power amp sound and response.
Controls: gain, bass, middle, treble, master, input channel toggle switch, headroom toggle switch.
Gain control: from clean to big bold British crunch/overdrive.
3-band Hiwatt style EQ (bass, middle, treble).
Presence control follows the original design/is located at the negative feedback of the power amp simulation circuit to control the amount of upper mid and high frequencies.
Master knob sets overall output volume. Designed to respond like the original control producing more gain at higher settings.
Input channel toggle switch selects between normal, bright, or linked input channels of the AMP for different voicing and gain levels.
Headroom toggle switch selects between the high headroom and dynamic response of a 100W amp or the lower headroom and compression of a 50W power amp.
Independent operation of the BOOST/OVERDRIVE and AMP sections
Click-less true bypass design via high-quality relays for each section.
2 Footswitches / 2 Status LEDs - one for each effect section.
Power-up bypass/engage preset function for the footswitches.
Top-mounted jacks
Passive series effects loop to connect pedals between the two sections or use them separately as independent effects.
Power Supply: Use only 9V DC, 2.1 mm x 5.5 mm, center negative (not included).
Runs internally at 18V DC (via voltage doubler circuit) for higher headroom and tube-like performance.
Current consumption: 84mA.
British Racing Green die-cast enclosure with color-coded lettering for the control section (orange for BOOST/OVERDRIVE section, white for AMP section).
Dimensions: (W x L x H): 119 x 97 x 53 mm.
Weight: 444 g.
Made in Greece.

Notes: 48-ohm version of the DT700 Pro X, part of Beyer's iconic DT series of studio headphones. Closed back design for mixing and monitoring, with a revealing, analytical sound.

Supplier's Notes:
Your studio headphones

DT 700 Pro X

Trusted sound meets performance and flexibility

In launching the closed-back DT 700 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO X series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the developed three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices

Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to Beyerdynamic's high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO. As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 350 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: Based on the legendary Roland Space Echo, the RE-202 brings tape-style delay effects into the future. Classic vintage sound in a modern, user-friendly package.

Supplier's Notes:
A Masterpiece Returns in the Modern Era

Introduced in 1974, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units ever produced. This tape-based classic remained in production for over 14 straight years, and its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks still inspire musicians, producers, and audio mixers over four decades on.

Backed by intensive R&D and Boss' latest innovations, the RE-202 faithfully delivers the authentic sound and behaviour of the Space Echo like never before. Built by the company that designed the original, this advanced pedal captures the RE-201's magic in flawless detail, from the magnetic tape and motor properties to the vibrant spring reverb and colourful preamp circuit. And to take things even further, Boss have expanded the vintage Space Echo experience with lots of new features tuned for today's music.

Tape Echo Magic

Tape echo was the first delay effect and one of the first effect processors available for electronic musicians. In contrast with today's CPU-based digital units, a tape echo is a simple machine that uses a motor to pull magnetic tape across one or more record/playback heads. Warm, full, and dynamic, the tape echo sound is influenced by many factors. The ever-changing input level colours the sound with varying amounts of tape saturation and compression. In addition, motor speed fluctuations, friction, wow and flutter, and other elements introduce an appealing modulated character that's subtle and continually evolving.

RE-201 Space Echo: Simply Legendary

The RE-201 was a benchmark Roland product and one of the leading tape echo units of its era. It featured three evenly spaced heads that produced a wider range of echo effects than typical single-head designs, plus an innovative free-running tape system that provided superior performance with minimal tape wear. Grab-and-go controls enabled quick access to clean, single delays or various head combinations for dense, rhythmic echoes. A spring reverb tank was included too, making the RE-201 a one-stop shop for quality ambience effects. Last but not least, analogue preamp circuitry was another key ingredient in the Space Echo's rich sonic recipe.

A Masterpiece Reborn

Realized through the latest technologies and exhaustive analysis of several vintage RE-201s-including a pristine original unit from the BOSS and Roland factory archive-the RE-202 brings the complete Space Echo experience to life in a versatile modern pedal.

While previous BOSS designs captured the true sonic flavour and essential characteristics of the Space Echo, new advancements have allowed us to go much deeper than ever before. With the RE-202, Boss' engineers have fully reproduced all the complex, non-linear behaviours that contribute to the RE-201's immortal character. Everything that influences the sound was carefully examined and recreated with all-new algorithms, including the tape path, record/playback mechanism, motor variations, preamp coloration, tape age, spring reverb character, and more.

Retro Sound at Your Fingertips

The RE-202 delivers the full vintage vibe of the RE-201-without the need for regular tape replacement and hardware maintenance. All the core controls of the original are here, including the iconic 12-position mode selector. Every behaviour is replicated with complete accuracy, such as the gradual pitch change that occurs when the Repeat Rate knob is tweaked, or the cool runaway feedback that happens when the Intensity knob is maxed.

With selectable tape age and variable controls, you can dial in everything from a brand-new Space Echo to the worn character and quirks of a well-loved vintage piece. The Saturation control has been carefully calibrated based on the actual magnetic tape and preamp behaviours of the RE-201, with the sound becoming warmer and more compressed as you turn up the knob.

Sampling Frequency: 48 kHz

AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converter.

DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, INPUT B: -10 dBu
Maximum Input Level: INPUT A/MONO, INPUT B: +7 dBu
Input Impedance: INPUT A/MONO, INPUT B: 1 M ohm
Nominal Output Level: OUTPUT A/MONO, OUTPUT B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, OUTPUT B: +7 dBu
Output Impedance: OUTPUT A/MONO, OUTPUT B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, OUTPUT B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY switch, TAP switch, SATURATION knob, WOW & FLUTTER knob, MODE SELECTOR knob, BASS knob, TREBLE knob, REVERB VOL knob, REPEAT RATE knob, INTENSITY knob, ECHO VOL knob, MEMORY button, INPUT button, TAPE button

Connectors: INPUT A/MONO jack, INTPUT B jack, OUTPUT A/MONO jack, OUTPUT B jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)
Power Supply: AC adapter
Current Draw: 140 mA
Accessories: AC adapter, Owner's Manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Rubber foot

Options (sold separately)
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 192 mm / 7-9/16 inches
Depth: 133 mm / 5-15/64 inches
Height: 52 mm / 2-3/64 inches
Height (including rubber foot): 53 mm / 2-3/32 inches
Weight: 860 g / 1 lb 15 oz

Notes: Another update for WMD's clever dual VCA, this time a little bigger to give more control. Digital control of CV and attenuation gives lots of creative options. Third time's a charm.

Supplier's Notes:
WMD have done several designs of this circuit over the years, the first one had no knobs, the second was too small, the MKIII is finally how this circuit should be packaged. This module does some really cool stuff and is super useful in any system.

The Digital VCA lets signal through like a normal VCA, but the CV and attenuation level is controlled digitally. This lets us do things like wait until there is a zero crossing to change the amplitude, resulting in clickless amplitude changes.

The Trigger mode causes the VCA to only update when a trigger is received. The addition of a noise circuit for each side let us do a very quick and easy sample and hold that never droops. With no input, 5V is normaled to the attenuator, so you get a 0-5V sample and hold. In Bipolar mode, you can get -5 to +5V.

Both sides have bipolar VCA mode (polarizer), which lets them invert the signal when negative CV comes in. Also known as ring modulation. With the zero crossing detector, this can produce some super wild wave shapes.

Features

Dual VCA Design
Unipolar or Bipolar Operation
DC Coupled Analogue Signal Path
Low Distortion / Low Noise
VCA Closes Completely
Zero Crossing Detector Mode
Trigger Mode
Two Independent Noise Sources
8 bit CV resolution
Great for Fast Envelopes and Sine Bass Sounds

Specifications

Power: +65mA, -45mA
Width: 8HP
Depth: 35mm with cables
Height: Eurorack 3U (128.5mm)
Board Height Behind Panel: 112mm
CV/Signal Input Impedance: 100k
Output Impedance: 1k
UPD in 3.3V Threshold Schmitt Trigger
ZCD produces 15us 5V pulse
5V CV to fully open VCA
Linear VCA response
20Vpp signal handling

Notes: A unique analogue take on granular synthesis, inspired by Yannis Xenakis, the Grainity pairs a granular filter with a multimode filter to create new textures and harmonics.

Supplier's Notes:
The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analog domain and goes through analog circuits from in to out.
The digital processor does not convert or generate audio signals; it is there to control the analog circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.
Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.
The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V

Notes: Two oscillators independently set as VCO, LFO, or random generator

This new version replaces the original Twin Waves. All features of the former are retained. You can check all videos, reviews and comments of V1, being sure to benefit of all in the MKII version :-)

Features in VCO mode:

V/Oct tracking over 10 octaves
Tuning lock with octave selection
Through zero and linear FM
Sub-octave output
Hard & soft synchronization
VCA control and CV algorithms selection
Quantizer with various scales
20 algorithm-based synthesis types among:
Wave shaping
Phase modulation
Phase positioning of multiple waves
Up to 5 stacked oscillators in tunable unison
Self-sync with phantom oscillator
Additive synthesis (7 waves)
Variable bit reduction (bit-crushing)
Ring modulator with its own 2nd oscillator
Noise with LPF, BPF, or resonant filter

Features in LFO mode:

Simultaneous signal and trigger outputs
External wave synchronization
Clock controlled rate with voltage controlled multiplier and divider
CV and knob control of output level
Algorithm based wave engine with a selection of:
Wave shaping
Phase modulation
Random levels and vectors (also Brownian)
Randomly spaced triggers and waves
Display with contextual icons and instant reminder help text
LEDs indicating potentiometer vs. value matching, switch settings and output signals
Automatically saved settings for instant recall at power on
Firmware update by playing an audio file via the front panel
Compact and skiff-friendly module

Dimensions
8 HP
21 mm deep

Current Draw
52 mA +12V
17 mA -12V
0 mA 5V

Notes: An updated version of the excellent Batumi quad LFO, version II introduces performance updates plus compatibility with the new Poti II expander. Original Poti I breakout functions are now included in the Batumi II.

Supplier's Notes:
Xaoc Devices presents Batumi II - a greatly improved and enhanced new iteration of the modern day classic that is/was the original Batumi, preserving its layout and form factor. The premise remains the same: four LFO's with individual outputs for sine, assign and rectangle waves. The channels can operate independently or they can be linked - phase shifted, divided or multiplied (new mode alert) with regard to the first channel. Multiple major and minor improvements have been implemented, e.g. when synced to an external clock source, each channel's frequency slider selects a clock division for that channel's outputs.

Xaoc Devices have managed to incorporate the features of the original expander into Batumi II (sync mode switching and assign waveform selection) without changing the size of the module which opened up new possibilities for the new optional expander. The Poti II expander for Batumi II adds multi destination inputs for sine wavefolding, assign output waveform selection or rectangle pulse modulation with the destination set for each channel independently. Poti II also features frequency input attenuation as well as sine and assign output attenuation. All adjustments may be performed separately for each individual channel or for all channels simultaneously.

The Batumi II software has been rewritten from scratch to ensure best performance. The hardware has also been updated to allow for V/oct tracking and stable operation up to audio rates (more powerful CPU, precise, wideband converters, antialiased waveforms).

-4 LFO's
- redesigned from scratch - both the hardware and software
- new waveforms for the assign output (including random)
- new frequency multiplication mode
- all features of the Poti expander incorporated into the main module
- very wide frequency range well into audio rate
- 1V/oct tracking = so can be used as 4 VCO's
- in the Phase/Divide/Mult modes the random waves at the ASGN output follow the values available in the master/A channel
- 10HP
- +90/-50mA

Notes: DP-2000 is a digital percussion pad with 8 touch sensitive zones and a huge library of internal sounds.

A USB-to-PC/Mac interface enables integration with a software recording suite as a trigger controller and sound source. Sounds from the flagship DM-8 kit are stored internally, along with additional world percussion instrument samples and the option to add user samples from a USB flash drive. Sounds are assignable to pads and adjusted using the intuitive user interface and control surface, and each pad has a dynamic indicator which varies in brightness to mirror the playing dynamics. Dedicated MIDI in and out connections mean that the DP-2000 can expand a live playing setup or operate from hardware sequencers and other MIDI controllers. In addition to tuning and dynamics control, dual-engine DSP effects can be applied to each sound and tailored to suit each sound. If performance space is very limited, inputs for a hi-hat pedal, kick pad and an additional trigger can turn the DP-2000 into a fully playable super-compact e-drum kit. Add the possibility of music playback from USB flash drive and comprehensive input and output options, the DP-2000 is as much at home as a standalone instrument or as an expansion to an existing drum or percussion kit.

Add hi-hat & kick triggers for a full e-drum kit
USB-C Bluetooth adaptor
USB interface to PC/Mac
Importable WAV files for custom sounds
Power supply: 9Vdc, 500mA (tip-negative) adaptor supplied
Inputs: Aux input, trigger, hi-hat, kick, MIDI 5-pin DIN, USB-C (U-Disk)
Outputs: Headphones (3.5mm), L+R output (6.3mm), MIDI, USB-B (PC/Mac)
Dimensions: 408 x 314 x 62mm
Weight: 2.8kg

In the box

The box for this item contains:

DP-2000 digital percussion pad
DC power adaptor
USB-C Bluetooth adapter

Notes: ***B-STOCK: Box opened, product in perfect working order***


A creative new approach to sampling, the first release from Teenage Engineering's EP Series is an evolution of the PO-33 K.O! Pocket Operator. Sample, program, sequence and produce in one comapact, retro box.

Supplier's Notes:
Get ready for Round 2

Meet the next evolution of the world's most sold sampler. Based on the legendary PO-33 K.O!, the new EP-133 K.O. II adds more power, more sampling capabilities, a fully reworked sequencer and brand new punch-in 2.0™ effects. Introducing a workflow that lets you go from idea to track faster than ever. It's pocket operators gone pro.

The champ is here

A versatile machine with an impressive set of features, K.O. II is the new champion in and outside the studio. Unrivaled by anything in its class, this is the sampler you've always wanted.

Record sounds around you, sample your voice, favorite synths, vinyl records or whatever audio that you've got on your phone.

Sequence your samples and loops. Make use of the curated selection of drums, bass and keys that come pre-loaded on your K.O. II.

Tweak and automate things like filter, pitch and more... add stereo effects, compressor and next generation punch-in effects.

Knock out features

9 projects each with 80,000 notes
Projects contain 4 groups, each with 99 patterns
Patterns have 12 tracks for samples and midi
Variable pattern length per group (1 to 99 bars)
12 mono / 6 stereo voice polyphony
Use groups to mix and match patterns on the fly
Record and automate all 12 fader assignments
Sequence in free time or quantized with swing
Assign any pad to one of 16 midi channels
Loop mode from OB-4 with length and slide
12 pressure and velocity sensitive pads
Instantaneous time correction and erase
Slice samples live or automatically
Stereo / mono sampling at 46.875 kHz / 16-bit
Punch-in 2.0: effects (pressure sensitive)
Arrange quickly using the instant commit feature
32-bit float signal chain, 24-bit ADC/DAC
Sync io for ext. Gear. 8th, 16th note or sync24
6 built-in send FX and a master compressor
Drag and drop samples using the sample tool

The sequencer engine of the K.O. IIO provides an intuitive, fast way of building up beats and variations using 4 groups x 12 patterns. Like most DAWs, you can instantly swap patterns per group, experiment with different combos to find what beat and bass lines work together. The commit button helps you freeze a point in time and move on, adding a verse or a break. It all happens in real time while playing.

Built-in mic and speaker
USB-C
Midi output
Midi input
Sync output
Sync input
Audio input
Audio output
4x AAA batteries

One-two punch

Vintage style keys with a modern touch, combining tactility with pressure sensitivity.

10" EP format

Comes in a limited edition 10" collector's box

Tech specs:

K.O.II highlights

Sampling frequency: 46 kHz / 16-bit
Internal signal chain: 32-bit
999 sample slots
64 mb memory
Preset samples
High resolution sequencer
Built-in FX
Fader and pressure sensitive pads
Six stereo voices, twelve mono
Runs on 4x AAA batteries with the option to be powered via USB-C

Dimensions and weight

240 mm x 176 mm x 16 mm
9.45" x 6.93" x 0.63" inches
620 g / 22 oz

Stereo input

24 bit
SNR: 96 dba
Analogue gain: 0 - 12 dB
Max level: 8 DBU, 2.0 VRMS

Stereo headphone/line output

24 bit
SNR: 98 dba
Max level: 5 DBU, 1.4 VRMS

MIDI input and output
TRS type A, MMA compliant

Sync input and output
Sync 8 ppm, 16 ppm, 24 PPQN
Start / stop

Notes: Make any studio monitors sound better

High-definition monitoring for all

Upgrade any studio monitors instantly with the first out-of-the-box acoustic room correction system that anyone can afford. ARC Studio combines a standalone correction processor, new ARC 4 measurement software and a room analysis microphone.

There's a reason all today's top-tier studio monitors are adding active room correction - it supercharges their performance and ensures mixes translate flawlessly. ARC Studio offers this same massive boost in performance and accuracy to any monitor in every studio.

For the first time in the recording industry, an affordable hardware processor can be used as a correction and calibration system for any type of studio - be it home, project or professional - without the limitations of a software-only system.

Standalone digital acoustic correction system
Dramatically improves your mixing accuracy
Works with any monitor system in any room
Installs in minutes in any studio or space
Sonically invisible, audiophile performance
Emulates top monitors and playback systems
Customize your monitors' performance to taste

Improves mixing accuracy

Your room has a big impact on how you hear your music. The size, shape, materials and furniture all work to distort the frequency and stereo balance of your monitors, degrading your sound.

ARC 4's all-new algorithm analyses and corrects these issues in minutes. Your music snaps into focus, with more controlled low-end, tighter transients and pinpoint stereo imaging. It's like an instant upgrade to your monitors.

And when you trust what you hear, you'll mix faster and more confidently than ever.

Installs in minutes

Plug the mic into your interface and you'll be guided through measuring acoustical spots within your listening position. IK's award-winning ARC technology uses this 3D snapshot to identify and completely correct all the problematic issues degrading your monitors' performance.

An all-new listening experience

ARC 4 stores the correction profile and loads it into the ARC Studio processor, sitting invisibly between your interface and monitors to apply to all incoming signals. The standalone processor corrects studio monitors in any studio, including hardware- and console-based setups.

Audiophile performance

ARC Studio features a 120 dB(A) analogue input to analogue output dynamic range, 0.5 Hz to 40 kHz frequency response and ultra-stable clocking for vanishing low jitter, offering total sonic transparency and a level of accuracy you only find in mastering-grade audio converters.

And it connects to your studio and monitors via balanced XLRs with power-safe relay-based hard bypass - so when bypassed you're protected from sudden power-related pops. Between the premium audio quality and ARC Studio's all-new correction algorithm, you'll enjoy the most natural, transparent monitoring ever.

Affordably priced

ARC Studio hardware is not only designed and made in Italy to the highest precision and quality standards, but its clever engineering makes it available at a fraction of the cost of other hardware solutions.

Now everyone can dramatically improve the sound in their mixing environments: from a single pair of monitors to multiple monitoring systems, up to large facilities with multiple mixing and recording rooms.

Improves any studio

For pro studios, whether in-the-box or console-based, ARC Studio allows for a sonically transparent correction and custom-tuning for any monitoring setup from nearfields to mains, preserving the inherent system's sonic quality.

For DAW-based studios, ARC Studio frees you from the hassle of inserting plug-ins on the master bus of your work and preserves zero-latency monitoring setups, plus it allows you to listen to your preferred streaming service with acoustically corrected monitoring without messing around with system drivers.

You can create a profile for every configuration, listening position or even monitor pair. Whether you're in a makeshift studio or a world-class one, fine-tuning your monitoring to your taste has never been easier and has never sounded so good.

Customise your monitors

Customise your setup for ideal performance no matter your preference. ARC 4 offers deep control over each profile so it always sounds its best:

Target curves

ARC 4 now comes with 9 factory target curves for most situations. The default curve offers optimally balanced results with other specific curves for different needs or setups.

Adjustable correction range

By default, ARC corrects the entire frequency spectrum, but you can define limits to both upper and lower correction ranges separately. This is useful if you want to preserve the unique voicing of your monitors or are just looking to correct a certain frequency range.

Specs

ARC Studio Specifications

Audio

AD and DA converters: AKM Velvet Sound™
Audio conversion and internal processing sampling rate: 96 kHz
Audio conversion resolution: 24-bit
Internal processing resolution: 32-bit float
Frequency Response: 2 Hz - 45.0 kHz (- 2.0 dB)
Dynamic Range: 120 dB (A-weighted)
THD (20-20 kHz): 0.00035%
THD+N (1 kHz@-1dBFS): -107 dB
Channel Crosstalk (1 kHz): -122.5 dB
Max Phase Deviation: +7- 20Hz, +16- 22kHz
Input Impedance (balanced): 20 kOhm
Output Impedance (balanced): 50 Ohm
Maximum output level: +17 dBu

Latency

Natural Phase mode: 1.4 ms
Linear Phase mode: 42 ms

Power

Powered by included Power Supply Unit
Dimensions

Size: 14.4cm / 5.6" x 12cm / 4.72" x 4.5cm / 1.77"
Weight: 465g / 1,03lb

Package includes

ARC Studio room-correction processor
ARC Measurement Microphone (depending on the version)
ARC Measurement Microphone Clamp (depending on the version)
USB C-Type to USB A-Type cable (1.5 m / 4.92')
Power Supply Unit
Registration card

System Requirements

Macr (64-bits)
Minimal: Apple M1 or Intelr Core i5 Processor, 4 GB of RAM, macOSr 10.15 or newer (macOS 11 or newer required for Apple Silicon Processors).
Supported Plug-in formats: Audio Units, VST 2, VST 3, AAX.
Works with any audio interface with a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1 kHz or 48 kHz sampling rate is required for the measurement process.
One free USB port required.

Windowsr (64-bits)

Minimal: Intelr Core i5 Processor or equivalent, 4 GB of RAM, Windows 10 (64 bit) or newer.
Supported Plug-in formats: VST 2, VST 3, AAX.
Works with any audio interface with ASIO drivers, a phantom powered XLR microphone input and a pair of outputs for monitoring.
44.1kHz or 48kHz sampling rate is required for the measurement process.
One free USB port required.

Requires an OpenGL 2 compatible graphics adapter.

Notes: A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide

Notes: The Quadigy is a complex envelope generator focused on live play.

The goal is to allow the user setting up rich, interactive and dynamically evolving envelopes without the risk of breaking up a subtle and intricate patch once on stage.

This is achieved by offering two main modes, one where full control is available and a Live mode where only the settings that are sensible using on stage are accessible.

The user interface offers an intuitive access for otherwise complex settings.

Advanced features such as automatic time-stretching, multiphase clocking and full morphing put the Quadigy in a category on its own.

Dimensions
14 HP
21 mm deep

Current Draw
24 mA +12V
10 mA -12V
40 mA 5V

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A unique analogue take on granular synthesis, inspired by Yannis Xenakis, the Grainity pairs a granular filter with a multimode filter to create new textures and harmonics.

Supplier's Notes:
The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analog domain and goes through analog circuits from in to out.
The digital processor does not convert or generate audio signals; it is there to control the analog circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.
Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.
The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz

Notes: ***B-STOCK: Box opened, product in perfect working order***


Stellar edition of the fantastic MicroFreak adds new features as well as a limited-edition paint job. Digital voices feed into the analogue filter to create a versatile hybrid sound engine.

Supplier's Notes:
MicroFreak Stellar is a hybrid synthesizer that combines digital oscillators, analogue filters, quirky modulation, a uniquely flat PCB keybed, and expressive sequencing with a subtly out-of-this-world aesthetic design.

Interplanetary synth explorer

Discover the same loveable hybrid beast that sent the synth world into a spin, but primed for launch and ready for an interplanetary sonic voyage. MicroFreak Stellar features the same inspiring, bonkers sound but embellished with a unique space-age design.

Digital, wavetable, sampling, granular...

Treat yourself to only the weirdest & most wonderful paraphonic synth sounds with MicroFreak's multimode sound engine. Choose from numerous algorithms, including Wavetable, Chord, 4 new Sample & Granular engines and many more, and immediately customize your patches with 4 intuitive con-trols and real-time visual feedback.

Multi-mode analogue filter

Unlock truly unique hybrid tones by combining MicroFreak's digital sound engines with a crunchy resonant analogue filter, inspired by the classic Oberheim SEM. With low-pass, band-pass, and high-pass modes, you can make this 'Freak whisper, scream, or launch into self-oscillating orbit.

Modulation matrix

Quickly rewire MicroFreak's architecture and delve deep into complex sound design with its modulation matrix, offering up to 7 simultaneous destinations and 5 sources, including an ADSR envelope, cycling envelope, and 6-shape LFO.

Sequencing & randomization

Blur the lines between sequencing & arpeggiation and create spontaneous melodies, motifs, and rhythmic patterns on the fly. MicroFreak encourages musical exploration, expression, and evolution with its unique Spice & Dice randomization feature, ribbon controller, and 4 lanes of automation.

A unique keybed

Change the way you play and unlock fresh musical expression with MicroFreak's distinct PCB keyboard. It's flat, it's fast, and it's fit for everything from lightning-fast solos to instant arp creation; not only is it pressure sensitive, but it offers poly-aftertouch too!

What's in the box

Box content

MicroFreak Unit
Universal PSU
Registration card
2x MIDI port adapters

Instrument dimensions

Size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Weight : 2.3 lbs. (1.02 Kg)

Notes: This is a digital effects pedal in a compact format, including reverse delay - pitch shifter - delay and modulated reverb.

Effects engine is 12 bit and includes analogue filtering before and after digital conversion, based on vintage eighties units' topologies, but it allows for all the effects to be simultaneously available.

Despite its complexity, operation is simple and intuitive, all functions are directly controlled by the corresponding knob.

Pots controls:

1-Blend controls mix of effects over final output signal
2-Octave blend mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component 5-Balance controls mixture from reverb and
delay.
6-Sample rate controls the frequency operation for the whole pedal, modifying delay time
and reverb decay.
7-Reverse blends the reverse component with the direct signal.

Indicators:

Signal: indicates clipping, the input path has compression and limiting so it gives an idea of how hard you are driving the pedal.

Tap: blinks at the rate of the delay, depending on tap and sample rate.

Tap/freeze: turns red while tapping time, blue indicates reverb freeze.

Bypass: global effect on/off

Footswitches:

1-Tap/ freeze works as a tap tempo for the delay and reverse delay, and freeze/infinite for reverb, selected by the associated toggle switch. Max delay time is around 6 seconds, depending on sample rate setting.

2-Bypass: buffered bypass for the whole pedal.

Power consumption: 150 milliamps.

Notes: The Beam Splitter is a single pedal meant to create a massive sound. It is three different takes on overdrive, voiced to work together perfectly. Two of them can be delayed in time, and all three can be run in parallel or split out to three separate sources.

Beam Splitter takes a mono input and makes it wildly bigger than before. Things stretch in time and compress in dynamics, and a rich harmonic wash is achieved without sacrificing clarity.

To be washed in sound, does it have to be one big sound, or will a number of small sounds do the trick? To create a wall of sound, same question, but also how does it stay solid? How can sound waves make a wall, and is it just a moment in time; will it always crash down?

Why record your guitar thrice when Beam Splitter exists?

Beam Splitter is best seen in three sections - Purple, Green and Blue.

Purple is a hard-clipping distortion that can be seen as the core gain sound of Beam Splitter.

Of Beam Splitter's three gain sections, it is arguably the heaviest and most compressed. It has three controls, identified by their purple knobs and labels - Gain, Volume and Tone.

Green is an overdrive with both soft and hard clipping. It is the lightest and brightest of the three gain sections in Beam Splitter. Also featuring Gain, Volume controls the green gain circuit features a Time knob, which sets the delay time, up to 125 sections. When blended in parallel with the other drives, this delay time can create anything from tight comb filters to loose doubling delays to short slapback.

Additionally, there is a Decay knob, which sets the feedback of the delay, from one repeat up to many repeats trailing off. In comb filter settings this can increase resonance.

Blue is a transistor Overdrive and the most neutral and reactive of the three gain circuits, with a gain range somewhere in the middle. Its Gain switch sets the amount of breakup. In the down setting, it is less overdriven, with less compression in the mids and highs. In the up setting, it is more overdriven and aggressive. It also boasts Time and Decay controls, on top of the Tone and Volume knobs and gain switch.

The pedal's Deviate control is a shared knob that sets the amount of random variation in the delay time of the Blue and Green drive sections. The more it is turned up, the farther their delay times can deviate, and the faster those deviations happen. When at zero, the delay times are fixed, above zero, each Time knob sets that sections delay time.

Deviate intends to create a more realistic sense of doubled players, with random variations in timing as if you were playing to the track twice. It can also give the impression of flanging, chorusing or broken vibrato, depending on the settings.

The Expression jack is used to externally control the Deviate knob using a TRS expression devices with standard polarity and tip connected to the wiper.

Beam Splitter has a mono input. From there the signal goes out to Purple, Green and Blue drive sections in parallel. If only plugged into the Purple Out Jack, all three sections will join in parallel mono at that Output. Green and Blue can each be broken off into their own output by plugging into the corresponding Out jacks.

In this way you can have a full 'stereo' setup.

Notes: Your studio headphones

DT 900 Pro X

Trusted sound meets performance and flexibility

In launching the open-back DT 900 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices



Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to the high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO.

As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 345 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: XVI-M MIDI Controller, 16 Faders, 16 programmable buttons, 14bit resolution

XVI-M Desktop is a 16 channel desktop MIDI control surface.

Features:

Long throw LED 60mm faders
USB MIDI, MIDI TRS#1 and MIDI TRS#2 outputs
USB Powered (USB C, Cable included). Stand alone adapter available but NOT included
14bit (MIDI Pitchbend) resolution faders. Can be set to any 7 bit CC or NRPN/RPN
Online parameter editor: https://misw.us/editor
Fader output can be routed to USB MIDI, TRS MIDI A or TRS B
3 color programmable button can be momentary, 1 state toggle, 2 state toggle, or 3 state toggle with each state sending a MIDI msg
Durable metal case
Includes:

XVI-M Control Surface
USB C to USB A cable (2m)
1.5m TRS A to MIDI DIN cable

Notes: Studio grade connectivity.

Your studio needs more than just accessible patching - exceptional audio quality through the entire signal path is crucial! Black Lion has been improving already-great gear through their modification service for years, and all that know-how has been channelled straight into the PBR TRS3.

The PBR TRS3 is a 48-point TRS patchbay, suitable for the most robust routing imaginable in a single rack space, loaded with 96 audiophile-grade gold-plated 1/4" TRS connectors for maximum conductivity and signal clarity. You'll easily interconnect your preamps and other outboard hardware via its audiophile-grade, secure connections.

Limitless flexibility and road-worthy construction

You'll reconfigure your entire studio's routing at a moment's notice (while cutting down on cable clutter! The rear-mounted 3-way mode switches allow for Normal, Half-normal, and Thru operation, delivering unlimited routing potential for mults, bypassing, monitoring, and parallel processing.

Black Lion's team of engineers have worked tirelessly to ensure that the PBR TRS3 delivers proper quality through-and-through. The PBR TRS3 is also built Black Lion-tough, with a reinforced steel chassis and black-anodized aluminium faceplates that make for a matched and sophisticated look.

Not your average patchbays.

Configure your studio with the best: Black Lion Audio PBR Series Patchbays. Your recordings deserve the best, and maintaining a great signal path is crucial!

Features

96 audiophile-grade gold-plated 1/4" TRS connectors
Rear-mounted 3-way mode switches for Normal, Half-normal, and Thru operation
Black-anodized aluminium faceplate and reinforced steel chassis
Includes front panel labels
Exceptional value for the price

Specifications

Number of Points: 96
Front Connectors: 48x XLR
Rear Connectors: 48x TRS
Dimensions: 534 x 102 x 51mm, 1.4kg (boxed)

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


DJ Controller Workstation XDJ-XZDJ

Customized to hold the Pioneer XDJ-XZ Controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

Fits

Pioneer XDJ-XZ

Specs

Outer measures: 97 x 58 x 23 cm
Inner measures: 87,8 x 44,2 x 8,4 cm (Controller-compartment)
Weight: 20 kg

Notes: Part of the new Boss 200 series, the RV-200 is a seriously classy reverb. With a choice of 12 algorithms, things quickly move from classic ambience to the pitch-shifted arpeggiated madness of the new Arpverb program.

Supplier's Notes:
Ambient Bliss

The RV-200 delivers inspiring reverbs and premium sound in the streamlined BOSS 200 series design. Twelve versatile reverb types-including the newly developed Arpverb-provide everything from subtle spatial colour to complex, dreamy textures for ambient explorations. Quickly dial in sounds with the fast-access interface. Save favourites in 127 memories. And take performances to the next level with flexible onboard footswitches, deep external control support, and head-turning creative tools like Warp, Twist, and more.

Studio-Grade Processing

The RV-200 features a powerful reverberation engine with class-leading sound quality, backed by custom BOSS DSP, 32-bit AD/DA, 32-bit floating point processing, and a 96 kHz sampling rate. Every algorithm offers true studio-grade performance, with exceptional detail and definition from the shortest early reflections to long, floating tails spanning multiple seconds.

Twelve Distinctive Reverbs

From essentials like Room and Hall to deeply immersive reverbs like Shimmer, Slowverb, and the cool new Arpverb, the RV-200 gives you the ambient colours you need for every song and style.

Room

Simulates the reverberation characteristics of a small room. Select from four room sizes with the Param knob.

Hall

Simulates the reverberation characteristics of a concert hall. Select from three hall sizes with the Param knob.

Plate

Simulates the reverberation characteristics of a studio plate reverb. Balance the high and low damping of the reverb with the Param knob.

Spring

Simulates the distinctive sound of the hardware spring reverb effect found in guitar amplifiers. Select the number of springs with the Param knob.

Shimmer

Creates long, dreamlike reverberations rich in harmonic content. Adjust the harmonic character and diffusion with the Param knob.

Arpverb

A newly developed BOSS reverb that creates an arpeggio type of sound with evocative pitch-shifted tails. Use the Param knob to adjust the attack of the arpeggio sound.

Slowverb

A sweet ambient reverb with gentle attack and soft harmonics. Param adjusts the amount of direct sound blended with the reverb, allowing you to create deep, immersive tones.

Modulate

Adds a modulation effect to a rich hall reverb sound. Adjust the modulation depth with the Param knob.

+Delay

Combines a delay with reverb, with the length of both effects controlled with the Time knob. Use the Param knob to adjust the delay level.

Lo-Fi

A specialty reverb with limited bandwidth and added distortion. Adjust the distortion amount with the Param knob.

Gate

A distinctive reverb effect that abruptly cuts off the reverb tail. Use the Param knob to control the timing of the gate effect.

Reverse

Plays the reverb sound in reverse. Adjust the high-frequency character with the Param knob.

Instant Sound Creation

Like all 200 series pedals, the RV-200 offers a powerful yet intuitive panel that lets you realize great sounds with minimal effort. Along with core parameters such as reverb time, effect level, and pre-delay, there are variable high and low filters to perfectly balance the verb for your application. You also have a density control to adjust the weight of the sound, plus a parameter knob with access to multiple sound-shaping tools that are unique to each type.

Expressive Performance Control

The RV-200 includes memories for storing 127 reverb sounds, so your favourite setups are always ready to go. Two onboard footswitches pack a lot of performance versatility, with numerous options to reassign their targets to suit your needs. For example, you can bypass the effect, scroll through memories, and activate a Hold function to carry on the reverb effect for as long as the switch is pressed. It's also possible to assign powerful performance effects such as Warp, Twist, and Fade.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes- ROOM, HALL, PLATE, SPRING, SHIMMER, ARPVERB, SLOWVERB, MODULATE, +DELAY, LO-FI ,GATE, REVERSE
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohms
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/HOLD switch, MODE knob, TIME knob, PRE-DELAY knob, E. LEVEL knob, PARAM knob, LOW knob, HIGH knob, DENSITY button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: DENSITY indicator, MEMORY (MAN, 1--4) indicators

Connectors
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type, CTL 1, 2/EXP jack: 1/4-inch TRS phone type, MIDI (IN, OUT) jacks: Stereo miniature phone type, DC IN jack, USB port: USB2.0 micro B (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adapter (sold separately)
Current Draw: 260 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
TRS/MIDI connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height(including rubber feet): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The EHX Epitome is the quintessence of guitar effects! This powerful digital multi-effect begins with the flawless polyphonic tracking of the Micro POG. Next is the Stereo Electric Mistress. Creamy stereo flanging and chorus weave and undulate for the richest modulations. Finally, the Holy Grail Plus wraps you in a silken shroud of luxurious reverb. Shimmer mode reroutes the effects chain for heavenly modulated ambience!

The polyphonic Micro POG provides glitch-free octaves above and below your actual pitch
Stereo Electric Mistress adds EHX's signature stereo flanging and chorus
Holy Grail Plus lets you choose from Spring, Hall and Room reverbs, plus Flerb
Shimmer Mode re-routes the effects' chain and opens the door to a world of amazing sonic discovery
Individual footswitches plus dedicated controls for all three effects
Power adapter included

Specifications:
Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 5.75 x 4.75 x 2.5
Current Draw: 185mA
Year Released: 2013

Notes: Dial in Professional Sounds in Seconds

The BOSS ME series has been a favourite of performing guitarists for over three decades, combining multi-effects power with intuitive hands-on control for crafting tones in seconds. The ME-90 is the most advanced ME model to date, offering exceptional audio quality, flagship-grade AIRD amp models, IR loading, an effects loop, and more. Compact, battery-powered, and filled with premium BOSS tones, this versatile all-in-one processor makes it easy to build customized sound setups for every playing situation.

Fast Sound Creation

With its knob-driven interface and diverse effects selection, the ME-90 lets you build configurations and tweak tones with the ease of a stompbox-filled pedalboard-without the hassle of fastening tape, power distribution, and multiple connection cables. Just dial up an amp model or effect type within a category and turn the knobs to get the sound you want. There are 36 preset patches with ready-to-play pro tones, plus 36 user patches for storing your custom creations.

Flexible Real-Time Control

The ME-90 features eight footswitches with smooth, quiet operation and an expression pedal with an integrated toe switch. Use Memory mode to call up complete patch setups with the footswitches, and then switch to Manual mode for direct on/off control of each effect category within the patch. The footswitch LEDs light in different colours for quick identification in the heat of a performance. It's also possible to set all LEDs to light in a fixed colour for each mode if desired.

High-Quality BOSS Effects

The ME-90 puts a massive library of BOSS effects at your command, offering seven different categories filled with selections derived from the flagship GT-1000. Everything you need is here, from overdrives and distortions to pitch/mod effects, delays, and high-quality reverbs. You also get 11 dedicated Pedal FX, a looper, and specialized effects such as acoustic simulation and down tuning. There are 60 effect types in total, with access to over 20 more via BOSS Tone Studio. A send/return loop is available for external pedals, complete with the ability to save the on/off status in patches and place the loop before or after amp models in the signal chain.

Premium Amp Sounds with AIRD Technology

Along with its effects, the ME-90 includes amp models ported from the GT-1000, driven by our advanced AIRD technology for authentic tube tone and touch response. Eleven onboard amp types offer everything from clean combo sounds to punishing high-gain stacks, and you can access more selections in BOSS Tone Studio. Each amp includes a dedicated cab sound for connecting to a PA or recording device, and you can load three of your favourite speaker IRs to personalize sounds to your taste.

Edit, Customize, and Expand

BOSS Tone Studio for macOS and Windows extends your creative range, allowing you to edit tones and change out some amp and effect types with alternate selections. In addition, you can save and organize patches for different gigs, download pro setups at BOSS Tone Central, and swap patches with the ME-90 community on BOSS Tone Exchange. The ME-90 also supports the optional Bluetoothr Audio MIDI Dual Adaptor, enabling you to stream music from a mobile device and wirelessly shape tones using the dedicated BTS editor app for iOS and Android.

Light, Durable, and Ready to Travel

The ME-90 is lighter than its previous generation model while maintaining the rock-solid durability that BOSS is famous for.

Specifications
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 32 bits
Processing: 32-bit floating point
Effects: 97 Types
Memories: 36 (User) + 36 (Preset)
Phrase Loop: 38 sec. (MONO)
Tuner Internal Detection: +/-0.1 cent
Nominal Input Level: INPUT: -10 dBu, RETURN: -10 dBu
Maximum Input Level: INPUT: +7 dBu, RETURN: +7 dBu
Input Impedance: INPUT: 1 M ohm, RETURN: 1 M ohm
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu, SEND: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater, SEND: 10 k ohms or greater

Controls:BANK DOWN/AMP switch, BANK UP/EQ switch, CTL/REV switch, MEMORY/MANUAL switch, 1/COMP switch, 2/OD/DS switch, 3/MOD switch, 4/DELAY switch, PEDAL FX switch, Gt. AMP/LINE switch, POWER switch, EXIT button, WRITE button, CTL button, EDIT button, PREAMP TYPE knob, GAIN knob, BASS knob, MIDDLE knob, TREBLE knob, LEVEL knob, REVERB knob, COMP/FX1 TYPE knob, SUSTAIN/SENS/-1OCT knob, ATTACK/TONE/-2OCT/DEPTH knob, LEVEL/PEAK/DIRECT knob, OD/DS TYPE knob, DRIVE knob, TONE knob, LEVEL knob, MOD TYPE knob, RATE/KEY knob, DEPTH/HARMONY knob, E.LEVEL/RESONANCE knob, DELAY TYPE knob, TIME knob, FEEDBACK knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob, PEDAL FX pedal
Display: 7 segments, 2 characters (LED)

Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
PHONES jack: Stereo miniature phone type
USB COMPUTER port: USB Type-C(R)
Bluetooth ADAPTOR connector: Dedicated connector
DC IN jack

Power Supply: Alkaline battery (AA, LR6) x 4 or AC adapter
Current Draw: 190 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 6.5 hours
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: STARTUP GUIDE, Alkaline battery (AA, LR6) x 4, Leaflet "USING THE UNIT SAFELY"

Options (sold separately)
AC adaptor: PSA-S series
Bluetooth(R) Audio MIDI Dual Adaptor: BT-DUAL
Carry Bag: CB-ME80,CB-BU10

Size & weight

Width: 443 mm / 17-1/2 inches
Depth: 220 mm / 8-11/16 inches
Height: 67 mm / 2-11/16 inches
Maximum Height: 93 mm / 3-11/16 inches
Weight(including battery): 2.9 kg / 6 lb / 7 oz

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Get ready for Round 2

Meet the next evolution of the world's most sold sampler. Based on the legendary PO-33 K.O!, the new EP-133 K.O. II adds more power, more sampling capabilities, a fully reworked sequencer and brand new punch-in 2.0™ effects. Introducing a workflow that lets you go from idea to track faster than ever. It's pocket operators gone pro.

The champ is here

A versatile machine with an impressive set of features, K.O. II is the new champion in and outside the studio. Unrivaled by anything in its class, this is the sampler you've always wanted.

Record sounds around you, sample your voice, favorite synths, vinyl records or whatever audio that you've got on your phone.

Sequence your samples and loops. Make use of the curated selection of drums, bass and keys that come pre-loaded on your K.O. II.

Tweak and automate things like filter, pitch and more... add stereo effects, compressor and next generation punch-in effects.

Knock out features

9 projects each with 80,000 notes
Projects contain 4 groups, each with 99 patterns
Patterns have 12 tracks for samples and midi
Variable pattern length per group (1 to 99 bars)
12 mono / 6 stereo voice polyphony
Use groups to mix and match patterns on the fly
Record and automate all 12 fader assignments
Sequence in free time or quantized with swing
Assign any pad to one of 16 midi channels
Loop mode from OB-4 with length and slide
12 pressure and velocity sensitive pads
Instantaneous time correction and erase
Slice samples live or automatically
Stereo / mono sampling at 46.875 kHz / 16-bit
Punch-in 2.0: effects (pressure sensitive)
Arrange quickly using the instant commit feature
32-bit float signal chain, 24-bit ADC/DAC
Sync io for ext. Gear. 8th, 16th note or sync24
6 built-in send FX and a master compressor
Drag and drop samples using the sample tool

The sequencer engine of the K.O. IIO provides an intuitive, fast way of building up beats and variations using 4 groups x 12 patterns. Like most DAWs, you can instantly swap patterns per group, experiment with different combos to find what beat and bass lines work together. The commit button helps you freeze a point in time and move on, adding a verse or a break. It all happens in real time while playing.

Built-in mic and speaker
USB-C
Midi output
Midi input
Sync output
Sync input
Audio input
Audio output
4x AAA batteries

One-two punch

Vintage style keys with a modern touch, combining tactility with pressure sensitivity.

10" EP format

Comes in a limited edition 10" collector's box

Tech specs:

K.O.II highlights

Sampling frequency: 46 kHz / 16-bit
Internal signal chain: 32-bit
999 sample slots
64 mb memory
Preset samples
High resolution sequencer
Built-in FX
Fader and pressure sensitive pads
Six stereo voices, twelve mono
Runs on 4x AAA batteries with the option to be powered via USB-C

Dimensions and weight

240 mm x 176 mm x 16 mm
9.45" x 6.93" x 0.63" inches
620 g / 22 oz

Stereo input

24 bit
SNR: 96 dba
Analogue gain: 0 - 12 dB
Max level: 8 DBU, 2.0 VRMS

Stereo headphone/line output

24 bit
SNR: 98 dba
Max level: 5 DBU, 1.4 VRMS

MIDI input and output
TRS type A, MMA compliant

Sync input and output
Sync 8 ppm, 16 ppm, 24 PPQN
Start / stop

Notes: Really clever stuff here. The Octaves VCO takes an additive approach, layering harmonics on top of a fundamental frequency to create complex tones. Control the six bands via CV to adjust the harmonic content.

Supplier's Notes:
A harsh and funky take of an additive Oscillator.

Pile up multiplications of your frequency to get a lo-fi-retro wall of squared sound!

You get six doubled frequency pulses, or octaves, with common PWM and volume control for each of them.

The output of each is cascaded to the next one, so you can either have one output with all frequencies or break the chain and get several sums and modulate each independently!

Features
Six bands, multiple of the base frequency.
Square wave oscillator with Octaves selector PWM control and sync.
Range control for Tune pot.
Volume CV control and individual output for each band
Cascaded summing outputs.

Specifications
Current needs: +12V: 110mA, -12V: 84mA
Width: 12 HP
Depth: 22mm (assembled and DIY), including power connector
Aluminium, heat-treated front panel
Designed, kits prepared and completed modules assembled in Barcelona

Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: The OpticTone is a combination of a 12dB multi-mode Vactrol Filter and a Vactrol Voltage Controlled Amplifier.

It is a completely original circuit inspired by the singular nature of Vactrols and their fluid and natural character.

The Filter section provides the three fundamental filter types: Lowpass, Bandpass and Highpass.

A Resonance knob with voltage control input is available for improved modulation flexibility. The feedback knob interacts with the Resonance path, tempering it from creamy resonance to wacky self-oscillation.

Filter and VCA run in parallel, both are controlled by the Freq/Amp knob and it's associated voltage-control input. The combination of both signals can be crossfaded with a dedicated knob.

The Freq/Amp is also controlled with direct touch control on the panel via the 3 lines below the knob.

The filter frequency control can be inverted by the Inv Freq switch, providing the possibility to change the filter direction. This feature allows the filter to "close" when the VCA is "opening" or the other way around.

The Ping input allows to generate the well known vactrol filter percussive sounds if a gate or trigger signal is provided. The Ping frequency if controlled by the Freq/Amp knob, ranging from low kicks drums to high pitch bongos.

There is also a Drive knob to take care of your saturation needs. The Overdrive range is wide, from soft textural clipping to heavy distortion.

All voltage controlled inputs have an attenuator-inverter knob.

Features:

Vatrol based 12dB multi-mode Voltage Controlled Filter: Lowpass, Bandpass and Highpass.
Vactrol Based Voltage Controlled Amplifier.
Crossfade between VCF and VCA section.
Voltage controlled Resonance.
Ping Input for percussive sounds generation.
Cutoff Frequency polarity inversion switch. Doesn't change VCA polarity
Overdrive and Feedback controls.
Attenuator/inverter knobs on all voltage controlled inputs
Touch control over Frequency and Amplitude.


Specs:

Width: 10HP
Depth: 33mm
Power consumption: 55mA +12 / 55mA -12
Eurorack Format
Doepfer power connection

Notes: A Juno-inspired oscillator module? We're flattered, but credit has to go to Roland for this one. Based on the Juno-106's digitally-controlled analogue oscillators, the Castor & Pollux modernises the 80s design with a built-in LFO and hard sync.

Supplier's Notes:
Twins that dance in and out of phase, never completely together but never fully apart, bound to each other in the infinite universe.

Castor & Pollux is a dual oscillator that echoes back to the legendary Roland Juno but shines with its own unique, massive voice. It contains two digitally-controlled analogue oscillators implemented using a faithfully modernized version of the original Juno 106 design. It builds on the classic '80s sounds of its inspiration by using the second oscillator and internal LFO to layer in thick detuned sounds and harmonically complex hard synced waveforms.

Castor & Pollux II brings a redesigned interface and moves individual waveform outputs to an included expansion. Both versions have the same features and use the same firmware.

14 HP
+12 V @ 100 mA, -12 V @ 35 mA
25 mm deep
2 separate oscillators
7 octave range
9 total outputs with waveform outputs and onboard mixers
Pitch CV input jacks (0 V to 6 V) and pitch knobs (-1 to +1 octave, configurable)
Pulse width CV input jacks and knobs
Hard sync
Hardware chorusing
Internal low-frequency oscillator (LFO)

Notes: The Tone Science Triple Cross module is a design collaboration between electronic musician/composer Ian Boddy and AJH Synth.

It features three independant cross fader and panner channels, and it can be used with both audio and CV signals. Each of the channels can be configured in one of four different ways:

1) One In, One out Linear VCA

2) Two in, One out crossfader

3) One in, Two out panner,

4) Two in, Two out cross fader & reversing panner combined.

Audio rate modulation can also be used on the CV inputs to create Ring modulation and Cross modulation type sounds. Each channel has a dedicated Fade control, CV input, and CV Level attenuverter. These can be used together to bias incoming CV signals.

The L1 and L2 outputs from channels 1 and 2 are normalised to channel 3's inputs, which also have their own level controls to balance incoming signals. This allows very interesting, complex fading and panning between four different input sources, to either Mono or Stereo outputs..

The Triple Cross is very versatile, yet relatively simple to understand and use. However, as they say "knowledge is power", so do spend a little time reading about how to configure the channels in the four different modes, and how to combine all three channels together to create a super-powerful Four to Two to One cross fader.
Each of the three channels can be configured in four different ways, and all three can be used simultaneously. They do not all have to be in the same mode, so we could for example use channel 1 as a cross fader, channel 2 as a Panner for completely different signals, and channel 3 as a Linear VCA, again for different signals.

Specifications

Effective CV Range for CV-1, CV-2 and CV-3 is 0 to +5V with attenuverter fully clockwise or 0 to -5V with attenuverter fully anticlockwise.
Maximum permissible CV Range for CV-1, CV-2 and CV-3 is -12 to +12V
IN 1A to IN 3B Input levels -5V to +5V, levels up to +/-10V are possible however some clipping may occur.
Module Width: 14hp
Module Depth: 26mm (Including power lead)
Current Usage: 80mA Positive, 72mA Negative

Notes: Part of Xaoc's Leibniz Binary Subsystem, the updated Drezno ADC/DAC module builds on the original with higher resolution converters, allowing you to use it for pitch quantisation.

Supplier's Notes:
Drezno II is an improved version of the original Drezno module. It is an essential member of the 8-bit Xaoc Devices Leibniz Binary Subsystem. The Leibniz subsystem is a family of modules that operate on 8 binary (two-state, on/off) signals. These signals are arranged as 8 bits of digital data and may represent analogue signals and voltages, or they may be whatever you want them to be (clocks, gates, rhythms, etc.).

Drezno features an ADC (analogue-to-digital-converter) and DAC (digital-to-analogue-converter), allowing it to act as an analog front-end of the system. In other words, Drezno allows one to convert analogue signals and CVs into digital numbers, as well as to obtain analogue signals back from some other digital numbers (or 8 binary signals). Between these two conversions there is a whole universe of digital shenanigans waiting to happen resulting in all kinds of signal transformations and modulations.

Both (ADC and DAC) sections of Drezno can work independently, or they can be linked. Input and output range of analogue signals may be adjusted using Gain and Offset sliders. Individual bit outputs (for the ADC) and inputs (DAC) allow for extensive cross-patching and the creation of complex waveforms and rhythms. A very fast clock (up to 2MHz) at which the conversions are performed may be replaced with any external clock (for each section separately).

Compared to its predecessor, Drezno II uses new converters of much higher resolution which results in much lower noise floor and higher accuracy. The lower bits are much more stable than before. It is easy now to use Drezno for quantizing pitch voltages with accurate results with 128 or 256 semitone steps. Potentiometer ranges are factory calibrated for precise chromatic scale. A new switch on the front panel allows the user to select the calibrated range of 10Vpp or 20Vpp, so that the lowest bit or the second bit correspond to 1 semitone.

Technical details

Eurorack synth compatible
12hp, skiff friendly
Current draw: +80mA/-50mA
Reverse power protection

Notes: An ART wavetable dual oscillator mono voice source that can be used to build polyphonic patches and multi voice patches. It generates its harmonically rich sound using two 80s vintage D/A converters to feed your filters and effect processors. VORTEX comes loaded with dozens of wavetables, plus additional user wavetables can be loaded from the front panel SD card. A detune knob controls the second VCO and adds effects from deep phasing to a sub octave. The position knob and CV input selects waves in the tables and vibrato from LFOs to create FM. Like other ART sound generators a dedicated Gate output manages the voice envelope or any modulation synced to that voice. VORTEX is a great companion to the analog ATX1 and a must for digital synthesist enthusiasts.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 80mA / -12V 25mA

Notes: A classic all analogue saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analog polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. TipTop consider the ATX1 the best sounding analogue VCO they have ever created.

Size: 8HP - Depth: 40mm / 1.5"

Power: +12V 105mA / -12V 33mA

Notes: Six-voice (or three stereo channel) mixer in a small format, the Supamix takes a straightforward but highly effective approach. Swap functions allow for creative approaches to mutes, randomisation and sequencing.

Supplier's Notes:
A compact stereo line mixer created with live performance and space optimisation in mind. This 6-channel stereo mixer has a fully analogue audio path with 2 VCAs per channel controlled by fines tuned analogue envelopes to minimise mute clicks. It also embeds a unique mute swap function with 6 modes allowing you to automate muting.

Supamix is a compact stereo line mixer designed for live performances and space optimization.
This 6-channel stereo mixer features a fully analogue audio path with 2 VCAs per channel and finely
tuned analogue envelopes for vactrol-like muting control minimizing mute clicks.

Supamix also includes a unique mute swap function with six modes, offering versatile
mute automation possibilities.

The mixer is designed with a variety of input options to accommodate different needs while
being compact:

- Inputs 1/2 have manual pan controls for placing static sounds within the mix.
- Inputs 3/4 have CV pan controls to moving sound sources in the stereo field
- Inputs 5/6 are stereo, making it easy to mix modules with stereo outputs (right input is normalized to the left) to mix the growing catalogue of stereo modules.

A header on the back allow you to use the L output as a TRS stereo output. Another header is here to link the Supamix with the O phone/line module.

The Swap functions on the modules are both useful for transitioning between sound scenes or creative applications. To change the swap modes on Supamix, press the Shift button and one of the mutes. If you press the Swap button, it will activate the swap manually. The following are the swap modes available.

1 -> Scene change gate : Reverse the mutes states when a gate is high
2 -> Scene change trig : reverse the mutes state when trigged (or if the swap button is pushed)
3 -> Binary counter : CV input between 0 and 5v will correspond to a 6 bit binary counter. At 0v mutes will be all oo, 5v will be all open. And it will count as follow :100000 010000 110000.....
4 -> Randomizer: Trigg to randomize the mutes. You can change the probability of having the mutes on by using a trigger between 2 and 5v.
5 -> Sequencer: Trig to go one step further. It reverse the current step mute state.
6 -> State rotation: Rotate the mute state 0v there isn't rotation, 5v is a full cycle rotation. This shift the mutes state (last one goes to first one)

Main features:

6 voice mixer
Manual pan on 1/2
CV pan on 3/4
Stereo inputs on 5/6
Unique mute swap functions
Linkable to the O output module

Some applications:

Compact case line mixer
Creative mute switching/sequencing
Feedback R out to one of the cv pan input to cv control feedback distortion

Technical details:

10 hp
Fully Analogue signal patch with 12VCAs with envelopes on each.
Skii friendly
Reverse power protection

Notes: Digitally-controlled full-analogue path Granular + Multimode VCF

The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analogue domain and goes through analogue circuits from in to out.

The digital processor does not convert or generate audio signals; it is there to control the analogue circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.

Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.

The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V
0 mA 5V

Notes: Record your voice, guitar, piano, synth, or any audio, and create great-sounding tracks with a plug-and-play bundle that does it all. For beginners, songwriters, content creators, and everyone in between, the MiniFuse Recording Pack gives you professional sound in a simple, fun, creative package - whatever your style.

Your recording all-in-one

Whether you're a beginner music maker, a content creator, a producer with limited space, or a musician on a budget, enjoy a pro-grade recording bundle for vocals, guitars, percussion, and more - without breaking the bank.

Plug-and-play interface

MiniFuse 2 gives you 2 audio inputs & outputs, MIDI for connecting synths & drum machines, and easy to use controls that work right out the box. Recording has never been so easy.

Make your voice heard

Capture your voice & instruments with supreme clarity without hassle. Follow the included step-by-step guide to connect your CM1 cardioid microphone and get recording - it even comes with a shockmount & pop filter to keep your recordings clean & noise-free.

Hear your sound come to life

Monitor your mix in studio-grade detail and comfortably smash out long sessions with the included EF1 closed-back monitoring headphones, great for production, live recording, and even just listening at home or on the move.

DAW music creation, your own way

Enjoy the most versatile & inspiring software bundle at this price point. From an introduction to an industry-standard DAW to a range of creative effects and audio enhancing tools, take your production to another level

Main Features

All-in-one audio interface recording bundle
Premium software bundle included
Analog Lab Intro with 500 vintage & modern keyboard presets
Rev PLATE-140 reverb
Pre 1973 vintage preamp
Delay TAPE-201 echo
Chorus JUN-6 analogue chorus
Ableton Live Lite

2 x combo Mic/Inst/Line XLR Input with 48V phantom power
2 x 1/4'' TRS balanced line outputs with volume control
1 x stereo headphones output with volume control
1 x 5-pin MIDI input & output
1 x USB2 type A hub (250mA max.)
1 x stereo virtual loopback channel
USB-C interface compatible with PC and Mac
Bus-powered

Microphone
Capsule: Condenser (Cardoid)
Sensitivity: -36 dB +3 dB (0 dB = 1 V/Pa at 1 kHz)
Frequency response: 20 Hz to 20kHz

Headphones
Type: Closed-back
Drive diameter: 40 mm

MiniFuse 2
2x Inputs
2x Outputs
1x Headphone
1x MIDI I/O

Subscriptions - Complimentary introductions to audio & mixing services:
Splice Creator Plan
Auto-Tune Unlimited

What's in the box

Box content:
MiniFuse 2 Unit
USB-A to USB-C cable
CM1 cardioid microphone with shockmount & pop filter
EF1 closed-back monitoring headphones with adapter
3m XLR cable

Platforms requirements

Windows
Win 10+ (64bit)
2.5 GHz CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Apple
Mac OS 10.13+
2.5 GHz or Apple Silicon CPU
4 GB RAM
2GB free hard disk space
OpenGL 2.0 compatible GPU

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Zoom's top-of-the-range handheld recording option, the H6essential records up to six tracks via built-in stereo mics and four mic/line inputs. Top quality 32-bit/96 kHz recording quality.

Supplier's Notes:
Zoom H6essential Handy Recorder

The Flagship - Zoom's most robust handheld recorder, the H6essential is a recording powerhouse. With 6 tracks of 32-bit float recording, the H6essential provides unprecedented quality and unmatched versatility.

Features

6-track 32-bit float recorder with Dual A/D Converters
Clip-free recording with no need to set gain
Records up to 96kHZ sample rate
Interchangeable Mic Capsule System 3.0 with 32-bit float support
Included X/Y Mic Capsule captures up to 135 dB SPL
4 XLR/TRS combo inputs with locking connector
Colour LCD Screen
Built-in mixer to adjust each track's audio level
Built-in speaker for quick reference playback
3.5mm headphone output plus 3.5mm line output
Voice Guidance accessibility for the visually impaired
32-Bit Float audio interface for PC, Mac, iOS, and Android devices via USB-C port
Use as an interface and record to SD card simultaneously
Using the BTA-1* Bluetooth Adapter, sync with wireless timecode devices via bluetooth
Use the BTA-1* Bluetooth Adapter to pair with the H6essential Control App for iOS
Record to SD cads up to 1TB
10 hours of battery life on AA battery (2x) or USB-C Bus Power
*Please note: BTA-1 Adapter not included

Outputs you need

Use the line output to connect to a camera and the headphone output to monitor your audio.

Quieter controls

Recording and rotary controls have been meticulously designed to allow for silent operation.

Onboard speaker

Use the improved onboard speaker to listen to your recordings for quick reference.

Six perfect tracks

The 4 XLR/TRS combo inputs feature ultra-clean Zoom preamps, and the included X/Y microphones can capture up to a booming 135 dB SPL, equivalent to a jet taking off.

Record and stream

Use the USB-C port to connect to PC, Mac, iOS, and Android device to use the H6essential as a 32-bit float interface while simultaneously recording all 6 tracks to an SD card.

Pair with your iOS device

Use the BTA-1* Bluetooth Adapter to pair with your iOS device to remotely hit record, adjust your mix, view your waveforms, and change settings.

Bluetooth timecode

With the BTA-1* Bluetooth Adapter you can also pair with Bluetooth timecode devices for audio and video sync. *BTA-1 Adapter not included.

Specs

Input & output channels

Inputs
Mic capsule: 1
MIC/LINE (mono): 4

Outputs
LINE OUT: 1
Headphones: 1
Built-in speaker (mono): 1

INPUTS
XY mic: XYH-6e: 90O XY stereo format
Directionality: Unidirectional
Sensitivity: -42dB/1Pa at 1kHz
Maximum sound pressure input: 135 dB SPL

MIC/LINE (mono)
Connectors: 4 XLR/TRS combo jacks (XLR:2 HOT TRS:TIP HOT)
Input gain: Adjustment unnecessary (dual A/D converter circuits used)
Input impedance: MIC: 3.8 kO or more, LINE: 39 kO or more
Maximum input level: MIC: +4 dBu, LINE: +24 dBu
Phantom power: +48 V
Channel total: 32 mA or less
Equivalent input noise MIC: -120 dBu or less(IHF-A) @150 O input, LINE: -95 dBu or less(IHF-A) @600 O input

OUTPUTS

LINE OUT
Connector: Stereo mini jack
Maximum output level: +1 dBu
Output impedance: 110 O or less

Headphones
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(when 32 O load)
Output impedance: 10 O or less

Built-in speaker
Type: 20 mm x 30mm elliptical dynamic speaker
Effective maximum output: 250mW

RECORDER
Maximum simultaneous recording tracks: 8
Maximum simultaneous playback tracks: 6

Recording formats:
WAV
44.1/48/96 kHz,
32-bit float mono/stereo
BWF and iXML formats supported

Recording media: 4-32GB cards compatible with the microSDHC specification, 64GB-1TB cards compatible with the microSDXC specification

Display: 2.0-inch full-colour LCD 360 x 240

USB
Connector: USB Type-C - Use a USB cable that supports data transfer.
Audio Interface : USB 2.0 High Speed
Input and output channels: 6 in / 2 out (Multi), 2 in / 2 out (Stereo)
Sampling frequency: 44.1/48/96 kHz (AIF only), 44.1/48 kHz (AIF + onboard recording)
Bit depth: 24-bit, 32-bit float
File transfer: USB 2.0 High Speed

Remote

Dedicated wireless adapter: ZOOM BTA-1

Power

4 AA batteries: Alkaline, lithium or rechargeable NiMH batteries
AC Adapter: ZOOM AD-17 (DC 5 V/1 A) - USB bus power is supported.

Estimated continuous operation times using batteries: 2-track recording (XYH-6e)
Alkaline batteries: About 18 hours
NiMH batteries (1900 mAh): About 14.5 hours
Lithium batteries: About 30 hours

48 kHz/32-bit float with phantom power off, no headphones, no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Estimated continuous operation times using batteries: 6-track recording (XYH-6e and inputs 1-4)
Alkaline batteries: About 3.5 hours
NiMH batteries (1900 mAh): About 4 hours
Lithium batteries: About 9 hours
48 kHz/32-bit float with phantom power off, headphones used (33O load), no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Power consumption: 5 W maximum

Dimensions
Recorder: 78.1 mm (W) × 160.1 mm (D) × 42.8 mm (H)
XYH-6e: 69.1 mm (W) × 50.8 mm (D) × 43.0 mm (H)
Weight Recorder: 381 g (including batteries)
XYH-6e: 42 g
Note: 0 dBu = 0.775 Vrms

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide

Notes: *** Onyx Edition ***

The ARP-87 is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes. The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin' runs.

With other features like the smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored.The X knob changes functions depending on which Algorithm you are using. It adjusts a specific parameter in each algorithm.

In Digital, Analog, and Slap modes, the knob will control modulation depth. In Lo-fi mode, the knob will control Filter width. Note that when changing delay types this loads a whole new algorithm and the tempo must be tapped in again.

Trails Mode

The ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off, the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Momentary Functions

When the switch is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of delay texture. Releasing the switch turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum. Releasing the switch sets the X parameter back to the knob location. Press and hold the Tap Switch to temporarily ramp the feedback to maximum.
Release to set the feedback back to the knob location.

The ARP-87 comes in a Frosted Charcoal finish with cream and seafoam ink featuring original artwork by Chris Castro of a lone ship traveling through the ARP-87 Galaxies.
Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA

In the box:

Walrus Audio ARP-87
Manual
Sticker
Guitar pick
Pouch

Notes: *** Onyx Edition ***

For Eons, man has thought the sound of thunder to be from the heavens above, echoing boastfully over us as we stay safe from its greatness. However, legend tells of a stoic and indomitable beast residing in the highest mountains seen and heard only by the most brash of travelers. With gnarled and twisted horns, this creature emits a sound thicker than Earth's crust to command attention and warn all who stand in his way. This is Eons.

Eons is a five-state fuzz capable of massively thick sounds ready to test the limits of any amp's grill cloth. Use the Voltage (lightning bolt) knob to crank up to 18 volts into the pedal's circuit for massive, open fuzz sounds, or choose to starve it down to 3 volts for spatty, gated fuzz. Experiment with the Voltage and Mode knobs for nearly endless styles of fuzz tones. Find vintage-inspired sounds emanating from the stages of Woodstock to chaotic three-chord punk rock. Eons is ready for a fight.

The Eons features a five-position rotary knob that offers the following clipping configurations. Think of them as different "flavors" of the pedal:
I. Silicon soft clipping traditional fuzz that's well rounded with a huge sound; compressed and smooth.
II. Silicon clipping with an added bass boost that boosts the low end at the beginning of the circuit; compressed and crunchy.III. Germanium soft clipping with a feel of "what if a distortion and fuzz had a kid?"; crunchy and dynamic.
IV. LED clipping diodes with a slight high-end cut; dynamically dark.
V. Hard clipping silicon transistors combined with LED and Silicon soft clipping diodes. The rowdiest of the modes with tons of gain: compressed, loud, and angry.

Specs

The Eons comes in a sandy tan enclosure color with red, cream and black ink. Artwork features a stoic four horned, Markhor goat illustrated by Adam Forster.
9V DC, center negative, 100mA min
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended. Power supply not included.

Notes: *** Onyx Edition ***

The Fathom is a feature-rich reverb with 4 different customized reverb algorithms to choose from. Easily go from tasteful, small room reverb to long, modulated trails dripping of ambient goodness. The toggle switch adds options for low, medium and high modulation. Use the dampen knob to fine tune the tone of the reverb's decay.

The Fathom features 4 different algorithms.

Hall - Wide, open and vast with decay that ends with high-frequency rolloff. X knob adjusts pre-delay.

Plate - Full Body reverb with a smooth decay. X knob adjusts pre-delay.

Lo-fi - Filtered reverb with decay ranging from warm, to thin AM-sounding radio. X knob adjusts filter width.

Sonar - Reverb fed with both a high and low octave with the ability to blend the octaves with the X knob.

Momentary Functions:

When the pedal is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of reverb. Releasing the switch turns the effect off.

Press and hold the Sustain Switch while the pedal is on, to sustain the reverb decay for a dreamy ambient decrescendo.

Trails Mode:

To turn trails mode on or off, unplug the pedal and press and hold down the Bypass Switch for two seconds while plugging the pedal back in.

The diecast enclosure's exact size is 4.77" x 2.6" x 1.39".
Power requirements are 9VDC (100mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
Power supply not included.

Notes: *** Onyx Edition ***

The Julia is a fully analogue, feature-rich chorus/vibrato packed with a wide array of tonal landscapes begging to be explored. Julia is able to produce mild smooth chorus, to seasick vibrato and everywhere in between. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analogue LFO wave shapes, you are able to dial in all types of classic and unique chorus/vibrato sounds not found on traditional chorus pedals.

In 1999, spectrographs picked up an unexplained sound emanating from dark ocean depths. The source of the sound was untraceable. While most scientists attributed it to an iceberg dragging the ocean floor, some sceptics began to understand the true source of the sound. Julia, the water demigoddess. Crying from the deep in a chorus of melancholy hymns, she remains to be uncaught but the pursuit for her is unceasing. Walrus has captured a fraction of her powers in the Julia Analog Chorus/Vibrato.

9V DC, 30mA
121 x 66 x 41 mm, 0.27 kg
Made in Oklahoma, USA

Dimensions and power consumption:

6,6 x 12,2 x 4,1 cm (W x D x H)
100 mA

In the box:

Walrus Audio Julia V2
Manual
Sticker
Guitar pick
Pouch

Notes: *** Onyx Edition ***

Building off of the lush, tonal landscapes that the Julia Analog Chorus/Vibrato created, Julianna is an all analogue, digital LFO, stereo chorus/vibrato with new expanded features. Julianna is able to produce mild smooth chorus, to seasick vibrato, to everywhere in between.

Familiar controls like Lag, Dry-Chorus-Vibrato Blend, and selectable LFO wave shapes are all still here, but Julianna employs some new tricks: The Secondary LFO speed, modulation drift, tap/expression control and momentary features will have you commanding all new kinds of sounds not found in traditional chorus pedals.

Unlike most other chorus pedals, the Julianna and Julia have a special feature called Lag control. The Lag knob lets you set the centre delay time that the LFO modulates. From smooth and tight modulation at lower settings, to a warbling detune at maximum, the Lag knob adds a new dimension to the traditional chorus/vibrato landscape.

D-C-V KNOB

The DCV knob sets the ratio of dry to wet signal through the mono channel of the Julianna. Traditional mono chorus sounds can be heard with the knob set around noon. Pitch vibrato is found in the full clockwise position. The ground in between offers unique blends of chorus and vibrato not commonly found on other chorus pedals.

When both outputs are connected, set the DCV knob to full counterclockwise to send your dry signal to the mono output and vibrato signal to the stereo output for a traditional stereo chorus sound. Explore other variations by turning the DCV knob up slightly to add some vibrato signal to the dry output changing the stereo image.
Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA

In the box:

Walrus Audio Julianna
Manual
Sticker
Guitar pick
Pouch

Notes: *** Onyx Edition ***

Like the Iguana that's malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colourful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analogue Flanger pulling in familiar layout controls from the Julia and Lillian.
Dial in a wealth of colourful flange with the D-F-V blend knob and the shape and voice switches.
The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line

The Voice Switch lets you select between two voices for the flanging effect.
In the down position, the flanger is more traditional and full frequency.
In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome.
Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs

Power supply not included.

Dimensions and power consumption:
0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
50 mA

In the box:

Walrus Audio Polychrome
Manual
Sticker
Guitar pick
Pouch

Notes: ***B-STOCK: Box damaged, slight surface marks, otherwise in perfect working order***


Bargainous DJ mixer from Behringer, packing in features expected from much more expensive products: four channel design with digital summing, three-band EQ and built-in effects.

Supplier notes:
The Behringer DDM4000 is a state-of-the-art 32bit digital pro DJ mixer, jam-packed with creative tools, yet its intuitive layout will let you feel at home in an instant. Editing, storing and recalling your settings is simply a breeze. Hook up your turntables and CD/MP3 players to its 4 stereo channels, each with fully programmable EQ and Kill switches. Put ultimate versatility at your fingertips with fully programmable beat-sync-able multi-FX modules, a pair of high-precision BPM counters and a digital crossfader with custom curve adjustment. The super-cool BPM-sync'd sampler with real-time pitch control, loop and reverse functions will make your crowd go wild.

Get this digital monster DDM4000 and become the star of the night.