安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Tonar

View:
Options
5159/59(ページ2/2)の商品
«  1  2
Cat: 699417 Rel: 14 Aug 18
 
Replacement stylus
Notes: Tonar replacement needle/stylus for Shure SS-35-C. Diamond tip.
Read more
 7 in stock $19.19
Cat: 567665 Rel: 24 Mar 15
 
Rolling record cleaner with "tacky" rubber surface for removing dust and other dirt from the surface of records
Notes: The TonarTacky Cleaner uses a special grade of rubber elastomer that never loses its original surface tackiness. Just rolling it lightly over the record surface in straight lines is enough to remove dust and dirt trapped in the grooves. When the roller has become dirty it is easy to clean. Just remove from the holder and wash with a little bit of hand soap under the tap with water.

After drying the roller with a lint-free paper cloth it regains its original tackiness.
Read more
 4 in stock $21.71
Cat: 716982 Rel: 16 Jan 19
 
Head shell Top Q - black
Notes: This is currently the best quality head shell that Tonar can supply. Equipped with the finest quality OFC Copper Litz cartridge connection wires. Azimuth is adjustable by releasing the screw on the side of the shell.
Read more
 3 in stock $62.23
Click for better price!
quote 716982
Cat: 716983 Rel: 16 Jan 19
 
Head shell Top Q - silver/bronze
Notes: This is currently the best quality head shell that Tonar can supply. Equipped with the finest quality OFC Copper Litz cartridge connection wires. Azimuth is adjustable by releasing the screw on the side of the shell.
Read more
 1 in stock $62.23
Click for better price!
quote 716983
Cat: 567683 Rel: 24 Mar 15
 
High quality headshell equipped with OFC copper litz cartridge connection wires
Notes: This is currently the best quality head shell that tonar can supply. Equipped with the finest quality OFC Copper Litz cartridge connection wires. Azimuth is adjustable by releasing the screw on the side of the shell.
Read more
 2 in stock $62.23
Click for better price!
quote 567683
Cat: 716965 Rel: 15 Jan 19
 
Digital stylus force gauge
Notes: Getting the most out of any turntable requires an accurate vertical tracking force setting-and yes, kids, you can easily hear changes as slight as a tenth of a gram. it is small, has a backlit display, is incredibly easy to use.

Accurate and simple to use - that's the essence of a great stylus force gauge, and that's what you get with this. We all know, or certainly we all should know, that dialling in your correct tracking force is absolutely essential for optimal record playback.

If you miss on the heavy side, your sound becomes thick and sluggish. Miss on the light side, and your cartridge is more likely to mis-track and the sound will be light and could damage your valuable records

So, stop messing with those mechanical stylus balances that aren't even accurate. This is one case where digital makes more sense when it comes to fine-tuning your analogue.
Read more
 1 in stock $28.00
Cat: 567704 Rel: 25 Mar 15
 
760g brass record weight for imporoving playback of warped records, and reducing vibrations through turntable platter
Notes: Any vibrations in the record during playback will be picked by the cartridge and will be reproduced by the amplifier and speakers causing muddy sound, distortion and reduced detail. In order to avoid record vibrations you must make sure that the contact between the record and the platter is as perfecrt as possible.The tonar record clamp presses the record flat against the platter. Put the record on the turntable and then put the clamp on the spindle, press down & turn the knob to tighten. The weight of the clamp is minimal so it can be used on any record player with a fixed spindle.

Also many older manufactured records are warped to varying degrees, this causes big problems for the diamond stylus of the cartridge to track the grooves properly. The stylus pressure fluctuates as the stylus moves up and down while trying to track the warps. With bad results: muddy sound reproduction with distortions and if the turntables drive isn't really strong... audible flutter. In some cases the stylus may actually loose contact with the groove causing a hissing sound. Using the Tonarclampit will press the record onto the turntable platter, and the problematic surface will be flattened while you play the record causing a dramatic improvement of the reproduced sound on old records.

Take care that the platter bearing of your turntable is able to accept the additional weight of 760 g. If in any doubt please consult your record player instructions or your dealer before buying or using this weight.

760 grams Brass weight
Covered with black enamel for protection
Measurements: 78 mm x 25 mm

Base covered with felt to protect the record label
Read more
 1 in stock $50.31
Click for better price!
quote 567704
Cat: 567663 Rel: 25 Mar 15
 
Record cleaning brush manufactured from goats hair, designed for use with liquid
Notes: This brush is manufactured from pure goat hair and is used to clean records using liquid. The shape of the bristles is such that they are perfect for entering the record grooves and cleaning them thoroughly.
Read more
 3 in stock $17.12
Cat: 664293 Rel: 20 Sep 17
 
Record cleaning brush manufactured from goats hair, designed for use with liquid
Notes: The Tonar Woodgoat is a high quality goats hair brush for cleaning your records. The shape of the bristles is such that they are perfect for applying cleaning fluids, entering the record grooves and cleaning them thoroughly.
Read more
 1 in stock $23.34
5159/59(ページ2/2)の商品
«  1  2

Filter

Tonar
Release Date
Featured
Close