安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synths & Wood

ホーム  Labels  

Synths & Wood

Options
123/23(ページ1/1)の商品
Synths & Wood Oak Veneered End Cheeks Triple Stand For Roland Boutique Series Synthesiser
Cat: 672209 Rel: 30 Nov 17
 
Oak veneered Roland Boutique custom made stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: This new version holds 3 Roland Boutique synths. This will also fit the TR09, TR08, SE02. SH01a and TB03 etc (you will need to remove them from the additional case that they come with).

The stand has been made from oak veneered MDF wood and is connected via 12x allen head Confirmat screws (key and screws provided) into an MDF wooden bar. These are a great addition to the Boutique synths and give a much nicer look and better working angle.

The Boutique synths are gripped in place by the sides of the stand, so do not fully tighten screws until units are placed inside. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The stand will need assembly as they will be sent flat packed - all screws, tools and rubber feet are provided.
Read more
 2 in stock $55.48
Click for better price!
or call +44 20 7424 1960
quote 672209
Synths & Wood Oak Veneered End Cheeks Triple Stand MK1 For Korg Volca Series Synthesiser
Cat: 719518 Rel: 13 Feb 19
 
Custom made oak veneered Korg Volca triple stand/end cheeks
Notes: - Holds 3 Korg Volcas
- Will also fit the Korg SQ1
- Made from Oak Veneered MDF
- Connected via 12 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wood bar

These are a great addition to the Volcas and give a much nicer look and working angle, you can also flip them round to have a much steeper angle if you prefer.

The Volcas fit snuggly into the stand so do not fully tighten screws until Volca is placed inside then tighten screws to hold in place firmly. Make sure you do this on a flat surface to ensure the feet are correctly aligned.
Read more
 1 in stock $47.55
Click for better price!
or call +44 20 7424 1960
quote 719518
Synths & Wood Oak Veneered End Cheeks Triple Stand MK2 For Korg Volca Series Synthesiser
Cat: 672217 Rel: 30 Nov 17
 
Custom made oak veneered Korg Volca triple stand/end cheeks
Notes: This version holds 3 Korg Volcas. The stand is made from oak veneered MDF and is connected via 12x allen head Confirmat screws (key and screws provided). These are a great addition to the Volcas and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer. They can also be painted with ease or stained with wood stain to suit your studio.

The Volca fits snuggly into the stand so do not fully tighten screws until it's placed inside, then tighten screws to hold in place firmly. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The stands need assembly as they will be sent flat packed. All screws and tools are provided - this includes small rubber feet.
Read more
 2 in stock $47.55
Click for better price!
or call +44 20 7424 1960
quote 672217
Synths & Wood Plain MDF End Cheeks Quad Stand For Korg Volca Series Synthesiser
Cat: 719506 Rel: 12 Feb 19
 
Custom made Korg Volca quad stand/end cheeks
Notes: These are a great addition to the Volcas and give a much nicer look and working angle, you can also flip them round to have a much steeper angle if you prefer, they can also be painted with ease or stained with wood stain to suit your studio.

The Volcas fit snuggly into the stand so do not fully tighten screws until Volca is placed inside then tighten screws to hold in place firmly. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

- Holds 4 Korg Volcas
- Will also fit the Korg SQ1
- Made from MDF
- Connected via 16 x Allen head Confirmat screws (Allen key & screws provided)
Read more
 8 in stock $47.55
Click for better price!
or call +44 20 7424 1960
quote 719506
Synths & Wood Plain MDF End Cheeks Triple Stand For Korg Volca Series Synthesiser
Cat: 719492 Rel: 15 Feb 19
 
Custom made Korg Volca triple stand/end cheeks
Notes: - Holds 3 Korg Volcas
- Will also fit the Korg SQ1
- Made from MDF and connected via 12 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wood bar

These are a great addition to the Volcas and give a much nicer look and working angle, you can also flip them round to have a much steeper angle if you prefer. They can also be painted with ease or stained with wood stain to suit your studio.
Read more
 2 in stock $41.89
Click for better price!
or call +44 20 7424 1960
quote 719492
Synths & Wood Plain MDF End Cheeks Triple Stand For Roland Boutique Series Synthesiser
Cat: 719563 Rel: 14 Feb 19
 
Custom made stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: Holds 3 Roland Boutique synths, ideal if you have the full range. The stand has been made from MDF wood and is connected via 12 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wooden bar.

These are a great addition to the Boutique synths and give a much nicer look and better working angle. They can also be painted or stained with ease to suit your studio.
Read more
 2 in stock $49.82
Click for better price!
or call +44 20 7424 1960
quote 719563
Synths & Wood Plain MDF End Cheeks Triple Stand For Roland Boutique Series Synthesiser (B-STOCK)
Cat: 800916
 
B-STOCK: Without original packaging, product in perfect working order
Notes: ***B-STOCK: Without original packaging, product in perfect working order***


Holds 3 Roland Boutique synths, ideal if you have the full range. The stand has been made from MDF wood and is connected via 12 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wooden bar.

These are a great addition to the Boutique synths and give a much nicer look and better working angle. They can also be painted or stained with ease to suit your studio.
Read more
 1 in stock $44.83
Synths & Wood Precision Recessed Solid Oak End Cheeks Stand For Korg SQ1 Sequencer
Cat: 719543 Rel: 14 Feb 19
 
Precision machined Korg SQ1 stand
Notes: This new version of the solid oak Korg SQ1 stand has been precision machined with a CNC Machine.

A recess for the Korg SQ1 has been cut into the sides so once assembled this stand becomes very strong and has great stability for live performance, giving you the peace of mind that your gear is safe.

The stand is made from solid European oak and is connected via 4x Allen head Confirmat screws (Allen key & screws provided) into an MDF wood bar. It can also be painted with ease or stained with wood stain to suit your studio.
Read more
 1 in stock $47.55
Click for better price!
or call +44 20 7424 1960
quote 719543
Synths & Wood Solid Oak End Cheeks Dual Angle Stand For Novation Peak Synthesiser
Cat: 728392 Rel: 24 Apr 19
 
Dual angle stand for the Novation Peak, precision machined from high quality oak
Notes: This stand has been precision machined and hand finished. You have the option of 2 different working angles, with a raise at the front so it can be placed behind a keyboard.

The stand is assembled using the existing screws. 4 small magnets are also provided to go over the screws, so you can use the logo that comes with the synth.

Item will need assembly as they are sent flat packed, all screws and rubber feet provided.
Read more
 2 in stock $69.07
Click for better price!
or call +44 20 7424 1960
quote 728392
Synths & Wood Solid Oak End Cheeks Dual Stand For Korg Volca Series Synthesiser
Cat: 672216 Rel: 30 Nov 17
 
Custom made Korg Volca stand/end cheeks
Notes: This version holds 2 Korg Volcas, which is ideal if you have the full range of Volcas as 2 stands can be put side by side to create a rack of four. The stand has been made from solid oak wood and is connected via 8x allen head Confirmat screws (key and screws provided) into an MDF wood bar. These are a great addition to the Volcas and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer.

The stand will need assembly as it will be sent flat packed - all screws are provided.

Due to the nature of the material when assembling the stand the braces may split - this is perfectly normal and the stand will function as it should.
Read more
 2 in stock $52.09
Click for better price!
or call +44 20 7424 1960
quote 672216
Synths & Wood Solid Oak End Cheeks Dual Stand Mk2 For Roland Boutique Series
Cat: 719555 Rel: 14 Feb 19
 
Custom made solid oak Roland Boutique stand/end cheeks
Notes: This stand holds 2 Boutique synths. It has been made from solid oak wood and is connected via 8 x Allen head Confirmat screws (Allen key & screws provided) into an MDF wood bar.

A great addition to the Roland range of synths, giving a much nicer look and working angle, plus now with more space for cables.

Read more
 1 in stock $55.48
Click for better price!
or call +44 20 7424 1960
quote 719555
Synths & Wood Solid Oak End Cheeks Stand For Ableton Push 2 Controller
Cat: 719547 Rel: 13 Feb 19
 
Ableton Push 2 oak stand
Notes: This stand has been precision machined and hand finished, the panels have been recessed for your Push 2 to make sure it's held firmly in place.

The stand is assembled by connecting the side panels with 4 x Confirmat screws. Fixings and Allen key provided, to assemble your stand ready for use.
Read more
 1 in stock $56.61
Click for better price!
or call +44 20 7424 1960
quote 719547
Synths & Wood Solid Oak End Cheeks Stand For Access Virus TI Synthesiser
Cat: 674332 Rel: 15 Jan 18
 
Pair of solid oak end cheeks for the Access Virus TI
Notes: Made from high quality oak, adding a touch of retro style to your synth. Each pair of cheeks is hand made and nicely angled to make the synth much more useable on your desktop. The end cheeks screw in using your original screws in the same place as the rack mounts or normal end cheeks.
Read more
 2 in stock $47.55
Click for better price!
or call +44 20 7424 1960
quote 674332
Synths & Wood Solid Oak End Cheeks Stand For Akai MPC Live Sampler & Sequencer
Cat: 719549 Rel: 13 Feb 19
 
Akai MPC Live solid oak stand
Notes: This stand has been precision machined and hand finished, offering a much nicer working angle for your studio setup.

The stand is assembled by connecting the side panels with 4 x Confirmat screws. Fixings and Allen key provided, to assemble your stand ready for use.
Read more
 1 in stock $62.28
Click for better price!
or call +44 20 7424 1960
quote 719549
Synths & Wood Solid Oak End Cheeks Stand For Clavia Nord Lead A1R Synthesiser
Cat: 728402 Rel: 08 May 19
 
Precision machined solid oak replacement end cheeks for the Clavia Nord A1R
Notes: These end cheeks have been precision machined from solid European oak sourced from a fully FSC (sustainable) supplier.

They are attached using the supplied screws.

These are a great addition and adds a vintage touch to your synthesiser.

Item will need assembly as they will be sent flat packed - all screws are provided, and includes small rubber feet.
Read more
 1 in stock $44.74
Click for better price!
or call +44 20 7424 1960
quote 728402
Synths & Wood Solid Oak End Cheeks Stand For Korg Microkorg Synthesiser
Cat: 672200 Rel: 30 Nov 17
 
Korg Microkorg oak end cheeks
Notes: These end cheeks are a direct replacement for the plastic end cheeks on the Korg Microkorg Synthesizer. They have been made from solid oak wood and are fixed using existing screws. The Wood has been oiled and should stay looking beautiful for a long time. These are a great addition to the Korg synth and add a touch of retro style.
Read more
 1 in stock $45.29
Click for better price!
or call +44 20 7424 1960
quote 672200
Synths & Wood Solid Oak End Cheeks Stand For Native Instruments Maschine MK3 Controller
Cat: 719501 Rel: 04 Mar 19
 
Maschine MK3 oak stand
Notes: This stand has been precision machined and hand finished, the panels have been recessed for your Maschine MK3, to make sure it's held firmly in place. The stand features a much wider working angle for your studio setup.

Assembled by connecting the side panels with 4 x Confirmat screws - all fixings and Allen key provided.
Read more
 5 in stock $63.41
Click for better price!
or call +44 20 7424 1960
quote 719501
Synths & Wood Solid Oak End Cheeks Stand For Roland Boutique K25M Keyboard & Module
Cat: 674329 Rel: 15 Jan 18
 
Pair of custom made Roland Boutique end cheeks
Notes: These side panels are a direct replacement for the metal end cheeks on the K25M Keyboard, and a great addition to the Roland Boutique range of synths, giving a much more expensive look and feel. They have been made from solid oak wood and are fixed using existing screws. The wood has been oiled and should stay looking beautiful for a long time.
Read more
 1 in stock $44.16
Click for better price!
or call +44 20 7424 1960
quote 674329
Synths & Wood Solid Oak End Cheeks Stand For Roland System 8 Synthesiser
Cat: 719534 Rel: 13 Feb 19
 
Custom made wooden end cheeks for Roland System 8
Notes: These end cheeks have been hand crafted from Solid Oak to give your System 8 a much nicer look.

The cheeks attach using the existing screws from the System 8 and takes a few minutes to add a touch of class to your synth.
Read more
 1 in stock $53.21
Click for better price!
or call +44 20 7424 1960
quote 719534
Synths & Wood Solid Oak End Cheeks Stand For Roland TR8 & MX1
Cat: 672211 Rel: 30 Nov 17
 
Roland Aira TR8 drum machine custom end panels
Notes: Custom built solid oak end cheeks for your drum machine.

This stand has been hand crafted from solid oak to give your drum machine a much nicer working angle.

The stand is assembled by connecting the side panels with 4x confirmat screws. Comes with fixings and an allen key to assemble your stand ready for use.

Item will need assembly as they are sent flat packed, all screws and tools are provided, this includes small rubber feet.
Read more
 3 in stock $52.09
Click for better price!
or call +44 20 7424 1960
quote 672211
Synths & Wood Solid Oak End Cheeks Stand For Waldorf 2 Pole Filter & Rocket/Streichfett Synthesiser
Cat: 672202 Rel: 30 Nov 17
 
Waldorf Rocket, Streichfett or 2 Pole Filter stand - solid oak
Notes: This stand allows you to have your Waldorf at 2 different angles depending on your taste. The end cheeks have been made from solid oak wood and are connected via 4x confirmat allen head screws (key provided) into an MDF bar. The Oak has been oiled and should stay looking beautiful for a long time. These are a great addition to the Waldorf Range and give a much more expensive look and feel.

The stand will need assembly as they will be sent flat packed, all screws are provided. Insert screws and tighten with the allen key - as soon as you feel the screw begin to tighten or get all the way in then only use gentle force to finish the process. The Waldorf fits snuggly into the stand - so don't fully tighten screws until the Waldorf is placed inside, then tighten screws to hold in place firmly.
Read more
 2 in stock $45.29
Click for better price!
or call +44 20 7424 1960
quote 672202
Synths & Wood Solid Oak End Cheeks Stand V2 For Softube Console 1 Mk1 & MK2 Controller
Cat: 742224 Rel: 03 Oct 19
 
Solid oak custom stand (tall version) for Console 1 - Mk1 & Mk2
Notes: This stand has been hand crafted from Solid Oak to give your console 1 a much nicer working angle.

Version 2 has been raised approx 4cm, as many users seem to have them behind some form of mixer or keyboard.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. We provide you with all the fixings and an Allen key to assemble your stand ready for use.

Item will need assembly as they are sent flat packed, all screws and tools are provided, including small rubber feet.
Read more
 1 in stock $50.96
Click for better price!
or call +44 20 7424 1960
quote 742224
Synths & Wood Solid Oak Recessed End Cheeks Stand For Roland TR8S Drum Machine
Cat: 719503 Rel: 04 Mar 19
 
Roland TR8S oak stand
Notes: This stand has been precision machined and hand finished, the panels have been recessed for your Roland TR8S, to make sure it's held firmly in place. The stand features a much wider working angle for your studio setup.

Assembled by connecting the side panels with 4 x Confirmat screws - all fixings and Allen key provided.
Read more
 1 in stock $56.61
123/23(ページ1/1)の商品

Filter

Synths & Wood
Release Date
Featured
Close