安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synthrotek

ホーム  Labels  

Synthrotek

Options
144/44(ページ1/1)の商品
FORTHCOMING
SynthRotek 1U Mattson Buffered Multiple Module (black faceplate)
Cat: 777875
 
buffered multiple module
Notes: The 1U Mattson Buffered Multiple is a PRECISION buffered mult that is perfect for 1V/O CV sources. A signal plugged into INPUT A will be available from all 8 OUTPUTS. Break the chain by adding a second signal into INPUT B; signal A comes out the 4 "A" outputs and signal B is available at the 4 "B" outputs.

Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.

Current draw: +12 18mA, -12 18mA
Width: 20HP
Depth: 32mm


Read more
MRP:$98.14 SAVE 19%
coming soon $79.64
FORTHCOMING
SynthRotek 1U Stereo Output Mixer Module (black faceplate)
Cat: 777888
 
stereo output mixer module
Notes: The 1U Stereo Mixer is intended for pannable stereo output, but it is also suitable for both DC (Gates, Triggers and Control Voltage) & AC (audio) signals.

Specifications:
Current draw: +12: 13mA, -12: 9.2mA
Depth: 32mm
Width: 24HP
Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.
Read more
MRP:$91.76 SAVE 19%
coming soon $74.34
FORTHCOMING
SynthRotek 1U UniBuffer Module (black faceplate)
Cat: 777891
 
buffer/gain mixer module
Notes: The 1U UniBuffer combines a buff mult and a unity gain mixer into a 1U module. It's great for small cases where you want both functions available (like the Power Lunch).

The Buffered Multiple is a PRECISION buffered mult that is perfect for for 1V/O CV sources. The 1U Unity Gain Mixer adds input signals together and combines them for a summed output.

Current draw:
+12V: 14mA
-12V: 13mA
Module Depth: 20mm
Width: 20HP
Polarity protected
Read more
MRP:$98.14 SAVE 19%
coming soon $79.64
FORTHCOMING
SynthRotek 1U Unity Gain Mixer Module (black faceplate)
Cat: 777893
 
mixer module
Notes: The 1U Unity Gain Mixer adds input signals together and combines them for a summed output. For example, if you put in a 1V source and a 3V source, the output will be 4V. It's mainly used for CV, but it can be used to combine audio signals together.

A unity gain mixer is handy in several ways:
Combining gates and triggers. Plug a few sequencer steps into the unity gain inputs, then run the output to a drum synth, VCA, envelope, etc.
Re-shaping two CV sources with a single envelope
Combining different wave shapes or LFOs to make crazy sounds.
Controlling the CV of one source with the CV of another source. Just plug the CV out of a sequencer into and an expression pedal/touchable CV out into the unity gain inputs.

Specifications:
Current draw:
18 mA +12V
18 mA -12V
0 mA 5V
Depth: 32 mm
Width: 20HP

Please note: Synthrotek's 1U products do not fit in Vermona or Intellijel cases.
Read more
MRP:$85.39 SAVE 19%
coming soon $69.03
FORTHCOMING
SynthRotek 308 Distortion Module (black faceplate) (fully assembled)
Notes: Get ready for the bright lights of the colosseum!

SynthTotek have taken the rock-solid RAT clone, squeezed it into a Eurorack module and added CV control over Gain. The 308 will take your playing to new heights with tremolo and other distortion modulation techniques.
Read more
MRP:$122.35 SAVE 19%
coming soon $98.76
FORTHCOMING
SynthRotek 4093 CHAOS NAND Synth Eurorack Module (black faceplate) (fully assembled)
Cat: 778157
 
eurorack noise generator module
Notes: The 4093 Chaos NAND Synth, in Eurorack form! The 4093 Chaos NAND Synth is a super-modifiable noise generator that will knock your socks off with its sonic potential: low pulsing drones, random robotic chaos, and high-pitched laser sounds!

A great project to begin your explorations into the world of DIY sound synthesis, the PCB was designed with the beginner in mind. Board-mountable switches, socketed IC, hands-on knobs and switches for tone control, and a detailed silkscreen PCB to help you solder components right the first time.
Read more
MRP:$115.98 SAVE 19%
coming soon $94.52
FORTHCOMING
SynthRotek ADSR Envelope Generator Module (black faceplate) (fully assembled)
Cat: 778161
 
ADSR envelope generator module
Notes: The Synthrotek ADSR is a small and simple envelope generator with some very useful features. CV is additive for overall length of ADR stages in ADSR mode and add even more length to just the Release stage by adding CV into the Release jack. AR mode allows for snappy to long dynamic rhythm lengths. Very short minimum lengths, self cycling and a maximum output of 5 volts makes this tiny (4HP) envelope a very feature packed and versatile module.

Read more
MRP:$152.94 SAVE 19%
coming soon $124.25
FORTHCOMING
SynthRotek Analog Drum Synth System
SynthRotek Analog Drum Synth System (modular synthesiser system)
Cat: 778469
 
analog drum snyth system
Notes: The Analog Drum Synth System is perfect for making the beats. The DS-M can replicate virtually any drum sound; with four, you can mimic a small drum kit, make acid beats, trance, all with the a warm analog sound. Add some crunch with the DIRT Filter and some delay with the DLY Module and ECHO, and you have yourself a perfect drum machine.

Housed in the Power Lunch. Includes a power brick.

The Analog Drum Synth is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A

Some great ways to use the Analog Drum System:
Plug drum pads or an electronic drum kit into the DS-M trigger inputs, it makes a live electronic set more physically dynamic.
Use a sequencer like the Arturia Beat Step Pro to trigger each DS-M. This is perfect for a solo act that needs synth drums, just set up a configuration and switch to a different instrument.

Modules:
DS-M (x 4)
DIRT Filter
DLY Module
ECHO
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,437.64
coming soon $1,350.00
FORTHCOMING
SynthRotek Arcadian Rhythms Module (black faceplate, blue buttons) (fully assembled)
Notes: Arcadian Rhythms is an arcade button module that can be used to trigger drums, envelopes and other events in a Eurorack system. When the buttons are pressed, they light up and send a gate. As long as a button is held down, the gate remains high.

Mix and match your LED buttons! The brightness between colors will vary slightly, but the trimmers on the back of the module will adjust the LED brightness so the three buttons match. Reducing the brightness will also reduce the current draw (each button draws 41mA at full brightness).

Choose red, blue, green, yellow or white buttons.

Specifications:
Module width: 35mm
Module depth: 6HP
Current draw: +12V: 123mA max (41mA per button)
Read more
MRP:$67.55 SAVE 18%
coming soon $55.22
FORTHCOMING
SynthRotek Atari Punk Console Eurorack Module (black faceplate) (fully assembled)
Notes: Here is the Atari Punk Console in Eurorack form! Originally designed by DIY electronics guru Forrest Mims III as the iStepped Tone Generator, the Atari Punk Console is one of the most famous and recognizable Lo-Fi synth circuits ever. Using a single 556 dual timer IC with minimal part count, the Atari Punk Console circuit is a solid, time-tested noise generator capable of outrageous square wave madness!

Control Voltage (CV) input allows step sequencers and waveform generators to expand the sonic capabilities of the Atari Punk Console from drone to arpeggio-like dynamism. Use any variable voltage source from 0-Supply Voltage for some glitchy goodness! The APC modular version has two CV inputs that modulate the two square wave internal oscillators.
Read more
MRP:$79.02 SAVE 18%
coming soon $64.78
FORTHCOMING
SynthRotek Beat Crusher System
SynthRotek Beat Crusher System (modular synthesiser system)
Cat: 778499
 
series module
Notes: PatchBox is a series of small Eurorack modular systems that are designed to accompany other standalone or computer-based audio hardware. These small curated systems are a perfect way to get started in modular without having to invest in more than you currently need. PatchBox systems are housed in Synthrotek's own Bus Cheeks and are powered via our USB power supply. PatchBox systems can be powered via a portable battery, computer USB jack or USB wall dongle.

PatchBox 20 - Beat Crusher

The Beat Crusher system was designed to augment rhythm making devises such as drum machines, Pocket Operators, Volcas and DAWs. The DLY and Roboto are at the heart of the sound expansion and destruction. The OBEY module can 'beat detect' and send an envelope and gate (or clock) to the RND module which in turn can send well timed voltages to the DLY and Roboto. The clocks and random voltage and then be patched back into the drum machines clock input, resulting in unique and abstract beat production.

Modules:
OBEY - Envelope Follower
Roboto
Passive Mult
RND - Random
DLY - Delay
Housed in a Bus Cheeks with a USB Power. Includes USB to USB mini cable.
Read more
MRP:$672.94 SAVE 21%
coming soon $531.03
FORTHCOMING
SynthRotek Bi-Translator System
SynthRotek Bi-Translator System (modular synthesiser system)
Cat: 778501
 
series module
Notes: The Synthrotek Bi-Translator is a new mini 44HP synthesizer system available as a completely built and calibrated system or as a do-it-yourself-kit. This versatile a system lets your translate your artistic voice bi-coastally and really anywhere in between.

The Translator’s powerful multi-waveform sound generation starts with the two fully analog VCO modules. Paired with the two channels of the Low Pass Gate Module, the VCOs can operate as two independent voices or can be used together for deep complex modulation.

ADSR envelope generation is produced by the aptly named ADSR module which is a powerful-for-its-size 4HP module that produces the heartbeat functions and LFOs.
The RND module is compact power station of variable random voltages, setting time signatures and esoteric timing anomalies.

The Sequence 8 is provides simple to complex sequencing when combined with the RND and other control voltage producing variables.
The Bi-Translator System 44 takes on the best features of West Coast synthesis with its insistence on organic percussion. This takes shape in the advent of the precisely crafted Synthrotek Dual Low Pass Gate Module, the LPG. Ear and hand selected vactrols provide organic earth-toned sonic variations from paleo hand drums to skin stringed instruments and beyond to cathedral bells.

Expansive and unique signal processing is provided by the DLY delay module. The DLY, like its predecessor the ECHO, takes full potential of its digital and analog topography by pushing the edges of what delay can do. The DLY performs 50s-era slap back, traditional repeats and even caustic post-industrial clock degeneration.

The 1U Stereo Output Mixer allows for internal signal mixing but also doubles as a performance mixer that allows you to incorporate other electronic music gear into your set.

Modules:
ADSR
DLY: Delay Module
LPG: Low Pass Gate
RND: Random Module
Sequenece 8
VCO (x 2)
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,407.05
coming soon $1,321.27
FORTHCOMING
SynthRotek Cosmic ECHO Delay Pedal (fully assembled)
Cat: 778344
 
delay pedal
Notes: The Cosmic ECHO is an analog-sounding lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This new take on this classic pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Zone and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

Read more
coming soon $99.83
FORTHCOMING
SynthRotek Cosmic ECHO Squared Analogue Delay Pedal (fully assembled)
Notes: The Cosmic ECHO Squared is an analog lofi delay that will work with just about anything you plug into it. The dark, lush, moody tones of the ever-popular PT2399 IC provide an out-of-this-world experience. This pedal pushes the chip's limits so you can explore all the gritty elements drifting at the edge of long delay rates. It already outperforms other bucket brigade style echoes, but just to be sure, we added 2 momentary switches, Blast and Warp.

Contains PT2399 IC, a bucket brigade style emulation. This IC has 16-bit sampling for 30-300 milliseconds. After that, the sample rate goes down in relation to the delay length. This results in artifacts and noise being introduced into the audio for weird, cosmic, psychedelic sounds.

This big sister of the Cosmic ECHO is tailored to live guitar and keyboard performers. It has all the features of the original plus:

- Expression pedal input over Rate

- Blast and Warp are now momentary stomp switches

- Blast amount knob now accessible externally
Read more
MRP:$207.74 SAVE 19%
coming soon $168.86
FORTHCOMING
SynthRotek DIRT Filter Module (black faceplate) (fully assembled)
Cat: 778171
 
low-pass filter module
Notes: DIRT is our new 4HP low-pass filter / effect for the Eurorack modular synth platform.

The DIRT is an unapologetic filter / effect that produces interesting and unique effects via the Bias knob, accessible from the front panel.

It's not a traditional filter; it's an effects module with filtering, ring mod effects, wave shaping and even outright brutal harmonic distortion.

DIRT likes to square things up a bit, so throw in a triangle, sawtooth, sine or other wave forms for different style effects. Even plugging a guitar (using an external amplification module) into the DIRT produces some great sounds and heavy distortion.

Controls:

- CUTOFF = Cutoff Frequency

- RESONANCE = Increase the Q!

- BIAS = Set the bias correctly or not, the choice is yours


Inputs/Outputs:

- Version 2.2, which as a buffered CV input jack. CUTOFF CV IN = Voltage range changes depending on where CUTOFF knob is positioned. External attenuation will be needed for fine modulation.

- AUDIO IN = Audio Input

- AUDIO OUT = Audio Output

Other info:

- PCB Dimensions: 4 x 1.5 inches

- 4HP

- Power consumption: >1mA
Read more
MRP:$79.02 SAVE 18%
coming soon $64.78
FORTHCOMING
SynthRotek DLY Delay Module (black faceplate) (fully assembled)
Notes: The Synthrotek DLY is a PT2399 bucket-brigade delay module. The PT2399 IC delivers warm and lush analog-sounding tones (the IC is partially digital). The DLY is similar in tone to our ECHO Eurorack module, but its features make it unique in its own right.
Unlike the ECHO which always has a wet signal (i.e. the output is always mixed in with the input), the DLY offers a true wet/dry Mix knob. When the Mix knob is fully counter-clockwise, you get a dry signal. When it is fully clockwise, you get a fully wet signal. This allows the user to plug this delay into effects loops. Also, the DLY allows for CV over Feedback and has an internal Feedback amount trimpot for precise adjustment.

Another added feature is the delay Rate range internal trimpot, which allows you to dial in the delay range of your choice. Turn the Rate knob all the way up to get the extreme, chaotic sounds of an over-clocked PT2399 chip.

Read more
MRP:$152.94 SAVE 19%
coming soon $124.25
FORTHCOMING
SynthRotek DS-M Analog Drum Synth Module (black faceplate) (fully assembled)
Notes: The DS-M is a full featured drum synth that can emulate virtually any drum sound!

The DS-M (Drum Synth Module) is a complex, modifiable, 100% analog drum synth loosely based on the Coron DS-8 and neatly packaged into an 8hp module.
Read more
MRP:$214.12 SAVE 19%
coming soon $173.12
FORTHCOMING
SynthRotek Duo Mini System
SynthRotek Duo Mini System (modular synthesiser system)
Cat: 778505
 
series module
Notes: PatchBox is a series of small Eurorack modular systems that are designed to accompany other standalone or computer-based audio hardware. These small curated systems are a perfect way to get started in modular without having to invest in more than you currently need. PatchBox systems are housed in Synthrotek's own Bus Cheeks and are powered via a USB power supply. PatchBox systems can be powered via a portable battery, computer USB jack or USB wall dongle.

The Duo Mini is the perfect way to add two fully analog synth voices to your DAW. The Sound Study Midi to CV converter can send 2 independent gates and CVs via your DAW.Connect the SS Midi to CV directly into your computer's USB jack and away you go. You do not even need an interface! The Duo Mini includes two ADSR envelope generators, two analog VCOs, and our dual Low Pass Gate module.

Modules:
2 x VCO - Voltage Controlled Oscillator
2 x ADSR - Envelope
LPG - Dual Low Pass Gate
Sound Study MIDI 2 CV
Housed in a Bus Cheeks with a USB Power. Includes USB to USB mini cable.
Read more
MRP:$855.19 SAVE 20%
coming soon $687.16
FORTHCOMING
SynthRotek ECHO Voltage Controlled Echo Module (black faceplate) (fully assembled)
Cat: 778205
 
voltage controlled echo module
Notes: The ECHO (formerly known as the EKO) is a compact voltage-controlled echo/delay comes in the very tidy size of 4HP and is certain to be one of the best bangs for your buck.

A very unique echo using the PT2399 IC featuring Voltage Controlled Rate. Manual controls for Rate, Feedback, and Mix. Beautiful and bizarre, CV modulation of the rate brings in ghostly pitch bent sounds to metallic reverbs. An effects module that everyone needs in their rig.

ECHO Rate CV accepts -5 / +5 voltages (although the negative range is almost -7)

ECHO Rate knob is setup to push the chip into extreme territory and will extend past the "useable" range of the PT2399 IC, meaning that once you turn the knob past 3 o'clock or so, the chip will stop operating and you'll only hear your dry signal.

Attenuation, attenuversion, or using an offset will greatly help when running voltages into the Rate CV input. This way, you can tailor the modulation as you see fit. You will absolutely get the most out of your ECHO by using modules that attenuate, invert or offset your signal.
Read more
MRP:$122.35 SAVE 19%
coming soon $98.76
FORTHCOMING
SynthRotek Face The Fuzz Pedal (fully assembled)
Cat: 778380
 
fuzz pedal
Notes: The Face The Fuzz is a modern take on a classic sound, modeled after the Dallas Arbiter Fuzz Face but with some important upgrades and modifications. Get the original Germanium PNP transistors for that classic tone just like the likes of Jimi Hendrix, Duane Allman, and George Harrison played!

What is the difference between Synthrotek's two fuzz pedals: Face the Fuzz and the Arbiter Fuzz Face Clone? The Arbiter Fuzz Face Clone uses the classic circuit that is known and loved by many, and everybody loves a classic. The Face the Fuzz pedal has been designed with a few key changes to make it more useful to the modern musician: a wider frequency response, the ability to daisy-chain the power with a 1 Spot, and the option to use temperature-stable Silicon transistors.

The Face The Fuzz comes with hand-tested and selected premium AC128 NOS PNP transistors. All of the AC128s for optimum gain and leakage current so that they are guaranteed to bias properly and sound great! Lower gain transistorshave been chosen for Q1 and higher for Q2 according to strict standards. Be assured that you will be playing a premium product that takes the guess work out of Germanium transistor testing.

Read more
MRP:$159.31 SAVE 19%
coming soon $129.57
FORTHCOMING
SynthRotek FOLD Module (black faceplate) (fully assembled)
Cat: 778207
 
wavefolder/ring modulator module
Notes: Synthrotek's FOLD is a combination Wavefolder and Ring Modulator. The FOLD changes the shape of a waveform in order to create harmonics and find new timbres and sonic palettes. The Ring Modulator circuit mixes two waves together to make metallic, bell-like tones, big bass lines and Dalek sci-fi robotic sounds. Patch your folded wave into the ring mod (or vice versa) for sonic euphoria!

Specifications:
Module width: 4HP
Module depth: 60mm
Current draw:
+12V: 50 mA
-12V: 40 mA
+5V: 0 mA
Read more
MRP:$191.18 SAVE 35%
coming soon $124.25
FORTHCOMING
SynthRotek M/DIV CV Controlled Multiplier/Divider Module (black faceplate) (fully assembled)
Cat: 778286
 
dual clock multiplier/divider module
Notes: The M/DIV is a CV-controlled dual clock multiplier/divider with tap tempo, ideal for complex generative patching, sequencer timing and unique rhythm generation. The M/DIV has three clock outputs: a master clock and two multiplied or divided clocks. Each channel can do either multiplication or division with the flip of a switch.

Specifications:
Module width: 4HP
Module depth: 55mm
Current draw:
+12V: 28mA
-12V: 2mA
Read more
MRP:$152.94 SAVE 19%
coming soon $124.25
FORTHCOMING
SynthRotek Mean Screamer Overdrive Pedal (fully assembled)
Cat: 778382
 
overdrive pedal
Notes: Synthrotek's original Mean Screamer Pedal goes way beyond a typical tube screamer clone with a couple of great mods. An original 4558 OP-AMP IC has been used to give it that beautiful classic boost.
Read more
MRP:$146.57 SAVE 19%
coming soon $118.95
FORTHCOMING
SynthRotek MIX Mixer Module (black faceplate) (fully assembled)
Notes: This simple passive mixer is suitable for mixing both audio and control voltage sources. Three channel inputs mix down to one output.

It is not suitable for additive voltage applications. All the jacks are switched to ground to minimize external interference when not patched. This can lead to unwanted attenuation of the output signal unless you plug a dummy cable into the unused channel(s) or, even easier, you can turn the channel's pot completely CCW.

Specifications:
Width: 2HP
Power consumption: none
Module screws included
Read more
MRP:$30.59 SAVE 14%
coming soon $26.29
FORTHCOMING
SynthRotek MIXIV 4 Channel Mixer Module (black faceplate) (fully assembled)
Notes: The MIXIV (mix 4) is a four-channel mixer in 4HP, fully built and ready to patch! Channels 1 & 2 can have their own output when a cable is patched in to the sub-output jack. When the left-hand OUT jack is not patched, all channels come out of the right-hand OUT jack. Mix CV or Audio simply and with slider precision! Very skiff friendly at only 26mm deep!

Specifications:
Module width: 4HP
Module depth: 26mm
Current Draw:
+12V: 15mA
-12V: 10mA
Read more
MRP:$85.39 SAVE 19%
coming soon $69.03
FORTHCOMING
SynthRotek MST Mono Voice System
SynthRotek MST Mono Voice System (modular synthesiser system)
Cat: 778509
 
analog modular synthesiser
Notes: Housed in Synthrotek's Power Lunch, the MST Mono Voice System is a powerful analog monophonic FULLY modular synthesizer.

Includes a power brick.

The MST Mono Voice is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A

Modules:
MST MIDI to CV Converter
MST VC LFO
MST VCO
MST Dual Envelope
MST Low Pass Filter
MST Dual VCA
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,529.40
coming soon $1,436.18
FORTHCOMING
SynthRotek MST SYSTEM 104 Modular System
SynthRotek MST SYSTEM 104 Modular System (modular synthesiser system)
Cat: 778516
 
amalog modular synthesiser
Notes: Housed in Synthrotek's 104HP Skiff Boat, the MST SYSTEM 104 is a very powerful analog polyphonic FULLY modular synthesizer.

Powered by Synthrotek's Case Power Red, the MST SYSTEM 104 has the following power specs: +12V @ 2A, -12V @ 500mA, +5V @ 1.5A

Modules:
MST Expressor
MST MIDI to CV Converter
MST MIDI to CV Expander
MST Ribbon Controller
MST '07 Buffered Multiple
MST VC LFO
MST Noise Sample and Hold / Track and Hold
MST VCO (x 3)
MST 4-Channel Audio/CV Mixer
MST Dual Envelope
MST Low Pass Filter
MST Dual VCA
VERB
MST Stereo Output Mixer
Read more
MRP:$2,814.10
coming soon $2,642.56
FORTHCOMING
SynthRotek MST SYSTEM 84 Modular System
SynthRotek MST SYSTEM 84 Modular System (modular synthesiser system)
Cat: 778518
 
analog modular synthesiser
Notes: Housed in Synthrotek's 84HP Skiff Boat, the MST SYSTEM 84 is a very powerful analog monophonic FULLY modular synthesizer. Includes a power brick.

Powered by Synthrotek's Case Power Red, the MST SYSTEM 84 has the following amperage specs: +12V @ 2A, -12V @ 500mA, +5V @ 1.5A

Modules:
MST MIDI to CV Converter
MST '07 Buffered Multiple
MST VC LFO
MST Noise Sample and Hold / Track and Hold
MST VCO (x 2)
MST 4-Channel Audio/CV Mixer
MST Low Pass Filter
MST Dual Envelope
MST Dual VCA
DLY Module
MST Stereo Output Mixer
Read more
MRP:$2,416.45
coming soon $2,269.16
FORTHCOMING
SynthRotek Nandamonium Eurorack Module (black faceplate) (fully assembled)
Notes: Low pulsing drones, dive bombs and high-pitched laser sounds! This drone monster has six square wave oscillators with a delay, essentially combining two 4093 NAND Synths and one Cosmic ECHO.

The Nandamonium has two SAG CV inputs. When the CV jack is patched and the switch is toggled to "CV," the NAND circuit is powered directly by the incoming voltage. Beyond controlling pitch, the incoming CV can also be used to create lofi rhythmic effects.

Dial in your drone with the Nandamonium!

Specifications:
Module width: 38HP
Module depth: 22mm
+12V current draw: 15mA
Read more
MRP:$201.37 SAVE 19%
coming soon $163.56
FORTHCOMING
SynthRotek Nano West System
SynthRotek Nano West System (modular synthesiser system)
Cat: 778520
 
modular synthesiser
Notes: PatchBox is a series of small Eurorack modular systems that are designed to accompany other standalone or computer-based audio hardware. These small curated systems are a perfect way to get started in modular without having to invest in more than you currently need. PatchBox systems are housed in Synthrotek's own Bus Cheeks and are powered via our USB power supply. PatchBox systems can be powered via a portable battery, computer USB jack or USB wall dongle.

The Nano West system is a fantastic west coast style sidecar to your Mother 32, keyboard based synth, DAW or other workstation. If you want to add the beauty of a true analog modular with the rhythmic possibilities of our Dual Low Pass Gate, then look no further. The Nano West's ADSR envelope can produce large self cycling swells or icy pinging beats and bongos. As a full mono voice, you can also control this with the Arturia KeyStep, etc. Add another voice to your Mother 32!

Modules:
VCO - Voltage Controlled Oscillator
LPG - Dual Low Pass Gate
ADSR - Envelope
RND - Random
DLY - Delay
Housed in a Bus Cheeks with a USB Power. Includes USB to USB mini cable.
Read more
MRP:$764.70 SAVE 20%
coming soon $614.93
FORTHCOMING
SynthRotek OBEY Module (black faceplate) (fully assembled)
Cat: 778292
 
envelope follower/attenuverter & offset generator module
Notes: OBEY is a dual-function module: one half envelope follower and one half attenuverter / offset generator.

Envelope Follower:
The OBEY takes an audio or CV signal and uses it to trigger an envelope or gate for use in a Eurorack system. It is designed to work with a wide variety of input levels: plug a Eurorack module, passive microphone, piezo, guitar, drum machine, Game Boy into your Eurorack system.

Attenuverter / Offset Generator:
Attenuvert your voltage sources up to two times in the positive or negative! The offset generator provides up to 5 volts in the positive or negative.

Specifications:
Module width: 4HP
Module depth: 48mm
Current draw:
+12V: 25mA
-12V: 18mA
Read more
MRP:$152.94 SAVE 19%
coming soon $124.25
FORTHCOMING
SynthRotek Octave Fuzz Module (black faceplate) (fully assembled)
Notes: The Octave Fuzz is SynthRotek's take on the classic 70's SuperFuzz circuit, made into a Eurorack module, which has improved on some aspects of the original as well, including an increased output.

Two distinct voices like the original: switchable between scooped midrange and massive midrange bump.

Aggressive: It will sound massive and in-your-face like no other circuit can. This is for sonic explorers and heavy music only. In short, it's not useful for EVERYTHING, but the things it DOES do it excels at. Sounds especially killer for keyboard and bass sounds.

Tuned to give a subtle distorted waveform one octave up via wavefolding (see the video to view this on an oscilloscope). (Completed modules come pre-tuned; there are calibration instructions at the end of the assembly instructions for the kits)

This circuit has been optimized for Eurorack. You can find a guitar pedal version here.

Current Draw:
32mA @ +12v
24mA @ -12v
0mA @ +5v
Read more
MRP:$152.94 SAVE 19%
coming soon $124.25
FORTHCOMING
SynthRotek Passive Mult Module (black faceplate) (fully assembled)
Cat: 778295
 
passive multiplier module
Notes: The Synthrotek Passive Mult is the module that keeps on giving! Use this as either a 2x 1-to-3 passive multiplier or one 1-to-6 passive multiplier. Input one cascades to all 6 output jacks, or can be interrupted by plugging a cable into input two.

What is a passive mult? It is an ideal way of multiplying non-precise voltages in your Eurorack system. (Buffered multiples like the MST '07 Buff Mult are needed to maintain exact outputs of input voltages). Multiply any control voltage or audio sources across your system with ease in a very small and well priced package.

Available as an assembled unit, kit or PCB/panel combo. With such a small part count, this is a great module for first-time DIYers!

Specifications:
Width: 2HP
Depth: 14mm
Current draw: n/a
Read more
MRP:$22.94 SAVE 13%
coming soon $19.92
FORTHCOMING
SynthRotek Power Pak Module (black faceplate) (fully assembled)
Notes: The Synthrotek Power Pak converts the power in your Eurorack case to 9V, 12v, and 5V USB. You can easily power guitar pedals, drum machines, controllers, USB lights, charge smart phones, and other devices without having to lug around bulky power bricks. Just plug a male-male connector cable (2 included!), daisy-chain cable or USB cable into the Power Pak, and you're good to go.

Need to add +5V to your existing power supply? By installing one jumper, the Power Pak allows you to add +5V to your power distribution board or bus cable. This can be used to power Eurorack modules that need +5V.

Keep it simple and tidy with the Synthrotek Power Pak!

Specifications:
750mA limit on 9v and 12v barrel jacks
1000mA limit on 5v USB jacks
DC jack size: 5.5 x 2.1mm
Width: 4HP
Depth: 30mm
Read more
MRP:$104.51 SAVE 19%
coming soon $84.96
FORTHCOMING
SynthRotek Quadrangle Envelope Generator Module (silver faceplate) (fully assembled)
Notes: The Quadrangle is quad cascading triggered envelope generator with bipolar output attenuversion. Each channel has voltage control over attack and decay/release, end of attack and end of cycle trigger outputs, and mode (AR, loop and AD). Each channel's EOC is normalled to the next gate input, resulting in interesting rhythmic opportunities. Channel 4 has a "stop" or "continuous looping" switch which allows either a "one shot" cascaded envelope or continuous cycling. The SUM output allows for longer and more dynamic bipolar envelopes, perfect for interesting modulation. Users also have voltage control over all of the attacks and decay/releases simultaneously when using the ALL A and ALL D/R input jacks. Massive function generation, modulation, rhythm and versatility sets the Quadrangle in a class of its own.

Specifications:
Module width: 20HP
Module depth: 15mm
Current draw:
+12V: 64mA
-12V: 44mA
Comes with power cable, 2.5mm and 3.5mm screws
Read more
MRP:$336.47 SAVE 19%
coming soon $272.95
FORTHCOMING
SynthRotek Ratatak Distortion Pedal (fully assembled)
Cat: 778384
 
distortion pedal
Notes: Synthrotek's version of the classic RAT pedal goes well beyond a clone- 3 of the MOST POPULAR mods are ON BOARD. Switching between these mods is very easy.

The "Ratatak" Rat Clone Complete Pedal gets you that classic gritty tone with a lot of options for your own! We've designed these PCBs as close to the raved-about original with the most popular boutique pedal mods on-board.

4 controls - Volume, Drive, Filter, and R-Tone - to customize your tone. Volume sets the output level, Drive lets you determine the signal gain, Filter dials in the high frequency response, and R-Tone turns up your bass frequencies from clean to fuzzy grit.

DIP Switch Diode Clipping - On-board 4PST DIP Switch selects between 4 different clipping diodes to drastically alter your sound. Turn on the stock version 1N4148s, LEDs, Germanium diodes, or none at all with flick of a little switch. Tons of tweak!

PCB is designed the original RAT tone IC, the LM308 single op amp, for the vintage tone. The updated version of the RAT line of pedals uses an inferior-sounding OP07DP op amp IC. Get the vintage tone!






Read more
MRP:$146.57 SAVE 19%
coming soon $118.95
FORTHCOMING
SynthRotek RND Random Voltage Generator Module (black faceplate) (fully assembled)
Notes: This handy module is a feature rich random voltage generator that is shallow and super powerful. It outputs random voltages (similar to a sample and hold) in time with either its internal clock, or with an external clock you can patch in. An external clock will bypass the internal clock, and the CV jack over the clock, so your random voltages will always be in sync with whatever you patch in. With CV control over both the clock speed and the range of your output voltage, you could create anything from a wildly fluctuating blur of notes all the way to a slow, lilting tune. The RND can also be used as a clock source with it's clock out jack.

Note: due to the voltage drop of the LED in the slide pots, the Range LED wont light up unless the output voltage is above 2v.

Current Draw:
16mA @ +12v
0mA @ -12v
0mA @ +5v

Comes with:
Keyed power cable.
2.5 and 3.0mm rack screws.
Super cool sticker.


Read more
MRP:$152.94 SAVE 19%
coming soon $124.25
FORTHCOMING
SynthRotek Roboto Module (black faceplate) (fully assembled)
Cat: 778309
 
CV controller/vocoder module
Notes: Need a vocoder, pitch shifter, speak-n-spell effect, vibrato, 8-bit modulator and a bit crusher sounding module all in a lo-fi heavily CV controllable package? Well surprise! we read your mind! The Roboto module is all these and more (and it has a neat Cylon looking graphic that lights up).

Vibrato toggles on and off. Works in either Robot mode or Pitch mode.

Robot and Vibrato CV inputs activate those modes (and deactivates in the case of vibrato) upon receiving a gate pulse. Gate pulses in these inputs are just like pushing their corresponding buttons. Expected transition is from 0V to +5V (and back to 0V), but it will handle any voltage within the power supply range without damaging the module. Transition between what is considered "off" and "on" is at approximately 2.3V.

Current Draw:
+12v @ 65mA
-12v @ 15mA
+5v @ 0mA
Depth: 34.5mm (1.36in)

Comes With:
Keyed Power Cable
2.5mm and 3mm rack screws
Read more
MRP:$183.53 SAVE 19%
coming soon $148.68
FORTHCOMING
SynthRotek Sequence 8 Analog 8-Step Sequencer (Eurorack version) (fully assembled)
Notes: The 'Sequence 8' analog 8-step sequencer is a traditional 8-step sequencer with some extremely handy features. It's available in 2 formats: Eurorack or 9V battery/wall wart (the kit version has a FRAC power option).
Read more
MRP:$244.70 SAVE 19%
coming soon $198.61
FORTHCOMING
SynthRotek Sound Study MIDI 2 CV Console Version
Cat: 778343
 
MIDI to CV module
Notes: The Sound Study Modular Midi 2 CV is a 4hp USB MIDI to CV and Gate converter. It has a bunch of different modes that it can operate on, like monophonic, duo monophonic, and many more!

Compatibility:
The Midi 2 CV is class-compliant but uses an unusual USB setting (1ms poll-rate in low-speed mode) not well supported on Windows.

Optimal latency is obtained with OS X >= 10.6.3 ; iOS ; or Linux >= 2.6.

On other systems, the Midi 2 CV will work but messages will be delayed by up to 8ms.

Conversion modes:
Monophonic with velocity
Monophonic with velocity and square oscillator
Dual monophonic
Duophonic
CC conversion
Monophonic with CC
Quad triggers
Quad gates
Monophonic CVCVpalpalwith MIDI clock output
Technical characteristics
Range and standards:

CV outputs: 0 to 4V, V/Oct (4 octaves).
Gate outputs: Positive V-trig, ON = 5V ; OFF = 0V.
Performance:

Resolution: < 2mV.
8 points calibration curve for non-linearity compensation.
Temperature dependency: +/- 2 cents within the 10- C to 80- C range.
Output impedance: 220O (rule of thumb: 2 cents drop per connection to a CV input).
Power supply:

USB-bus powered, current draw < 20mA.
Read more
MRP:$104.51 SAVE 19%
coming soon $84.96
FORTHCOMING
SynthRotek TST Module (black faceplate) (fully assembled)
Cat: 778316
 
test kit module
Notes: Test your modules safely without reaching into your case! The TST has two keyed 16-pin headers on the front of the module so you can plug and unplug quickly and easily. Two 16-pin plugs are included to shield the power pins when the module is not in use. It also has LEDs to indicate the power status on each rail.

Please note: Use this module at your own risk. You will be exposing electricity to the front of your modular system. Be careful not to dangle patch-cables, etc. on the exposed pins. This may damage modules and your power supply. Be smart and safe!

Features and Specifications:
Two 16-pin connectors and plugs on the front side of the module
LED indicator for each rail
Module width: 3HP
Module depth: 5mm
Current draw:
+12V: 1mA
-12V: 1mA
+5V: 1mA
Includes keyed power cable, 2.5mm and 3mm screws
Read more
MRP:$34.41 SAVE 16%
coming soon $28.94
FORTHCOMING
SynthRotek VCO Analog Voltage Controlled Oscillator Module (black faceplate) (fully assembled)
Notes: The VCO is an analog voltage controlled oscillator with a wide frequency range and 8 trackable octaves. It uses the Curtis CEM3340 reissue chip, which is famous for its outstanding sound quality. This is the fully assembled version of the VCO.

Specifications:
Width: 4HP
Depth: 53mm
Power draw:
+12V: 42mA
-12V: 31mA

Includes power cable and module screws.
Read more
MRP:$152.94 SAVE 19%
coming soon $124.25
FORTHCOMING
SynthRotek Verb Reverb Module (black faceplate) (fully assembled)
Notes: The Synthrotek Verb is a reverb module like no other. This PT2399 unit offers a warm tape-saturated spring reverb sound, but the added flair of subtle modulation truly makes it shine. The input gain knob drops the input amount back to give cathedral-like sounds when the mix is high. Turn the modulation knob manually for pitch bends; patch in a slow LFO or envelope CV to emulate pitch bends reminiscent of a tape echo with a broken capstan. The mix knob is a very fast-responding cross fader circuit which allows audio rate inputs for further FM-like modulation. Add a subtle amount of reverb or crank the mix past 3 o'clock to knock the reverb signal into the rails.

Current Draw:
18mA @ -12V
87mA @ +12V
0mA @ +5V
Width: 4hp
Depth: 54mm ( 2.13in )
Read more
MRP:$183.53 SAVE 19%
coming soon $148.68
FORTHCOMING
SynthRotek West Coast Noise System
SynthRotek West Coast Noise System (modular synthesiser system)
Cat: 778522
 
noise module
Notes: Clear a room faster than ever with the West Coast Noise System. The amount of insanity you can create from so few modules is incredible. It's analog drums, 8bit crunch and noise married to a sequencer. Be sonically devastating or intriguingly melodic.

The West Coast Noise System is powered by Synthrotek's Case Power Mini Yellow, which has the following amperage specs: +12v @1A; -12v @ 0.5A; +5v @ 1.5A

Modules:

Sequence 8
MST Noise Sample and Hold / Track and Hold
Atari Punk Console
DS-M
DIRT Filter
DLY Module
1U UniBuffer
1U Stereo Output Mixer
Read more
MRP:$1,070.58 SAVE 21%
coming soon $849.66
144/44(ページ1/1)の商品

Filter

Synthrotek
Release Date
Featured
Close