Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

preorders
ホーム  Labels  

Koma Elektronik

Receive new release alerts for Koma Elektronik

Filter

Koma Elektronik
Release Date
Featured
Options
17/7(ページ1/1)の商品
Koma Elektronik 7 Connectors Flying Busboard (single)
Cat: 928405 Rel: 14 Mar 23
 
7 standard synth module power connectors.
Notes: 7 Standard Eurorack Power Connectors (connect modules)
Read more
 1 in stock $14.20
Koma Elektronik Field Kit FX Spring Tank (cables included)
Cat: 927541 Rel: 14 Mar 23
 
Spring tank for use with the Field Kit FX.
Notes: Spring tank for use with the Field Kit FX. This is a 8BB3C1B tank with 3 springs (23.5cm length each) and long decay time of up to 4s. Input isolated, output grounded.

The short and shielded RCA cable offered with the tank is recommended. If you have a cable of your own, take the shortest one that fits your needs and make sure it's properly shielded.

Keep the cables and tank away from noise sources as much as you can, especially power adapters and power cables.
Read more
 1 in stock $30.24
Koma Elektronik Field Kit FX Spring Tank (cables not included)
Cat: 927538 Rel: 14 Mar 23
 
Spring tank for use with the Field Kit FX.
Notes: Spring tank for use with the Field Kit FX. This is a 8BB3C1B tank with 3 springs (23.5cm length each) and long decay time of up to 4s. Input isolated, output grounded.

A short and shielded RCA is recommended (available elsewhere). If you have a cable of your own, take the shortest one that fits your needs and make sure it's properly shielded.

Keep the cables and tank away from noise sources as much as you can, especially power adapters and power cables.

Please note: there is no cable included with this product.
Read more
 1 in stock $33.40
Koma Elektronik Field Kit Sensor Pack A (pack of 5)
Cat: 725945 Rel: 25 Mar 19
 
Sensor Pack A - features five useful components for owners of the Field Kit
Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.
Read more
MRP:$57.85 SAVE 11%
 2 in stock $51.28
Koma Elektronik Field Kit Solenoid Motor
Cat: 927294 Rel: 14 Mar 23
 
Solenoid push-pull motor for use with the Field Kit DC interface.
Notes: Solenoid push-pull motor for use with the Field Kit DC interface. Use this to get sounds out of objects by hitting them. Who doesn’t like hitting objects?

The DC interface of the Field Kit gives you the possibility to trigger the solenoid rhythmically and control its force.
Read more
 1 in stock $13.42
Koma Elektronik Komplex Sequencer
Cat: 570602 Rel: 05 Feb 16
 
Step sequencer built around four 16-step sequencers communicating via both MIDI and CV/Gate.
Notes: Powerful step sequencer built around four well-equipped full-featured 16-step sequencers communicating via both MIDI and CV/Gate. There are no screens or submenus.

All features have their own dedicated controls and have their own dedicated in- and outputs on the large 87-point patch bay. Every aspect of this sequencer is CV-able. Lastly a seven bank CV Recorder is on board and can output up to 5 banks at once!

The Komplex Sequencer opens up a whole new world of creative possibilities and starts where other sequencers have stopped!

Our step sequencer lets you construct complex musical patterns, via both MIDI and CV/Gate. Built around four full-featured 16-step sequencers in a compact and light enclosure, the Komplex Sequencer is a powerful tool both live and in the studio. All features have their own dedicated controls; no screens or submenus, and all features have their own dedicated in- and outputs on the large 87-point patch bay. By patching both internal and external CV sources through the patch bay of the Komplex, you can control any parameter of the sequencer immediately and "sequence the sequence." Controls include Speed, Sequence Length, Gate Length, Play Mode, Glide, Division, Transpose, Repeat, Sequence Start Point and Skip. Additionally, the sequencer can vary output range and also has a quantizer on board operable in different scales.

And not only is the sequencer compatible with almost any synthesizer with CV/Gate, MIDI note, velocity and CC information can also transmitted by any of the four sequencers. Lastly a seven bank CV Recorder is on board and can output up to 5 banks at once! The Komplex Sequencer opens up a whole new world of creative possibilities and starts where other sequencers have stopped.

CV Inputs
Clock, Rec Clock, Transpose, Start, Stop, Skip Step, Sequence Start Point, Repeats, Seq Length, Gate Length, Play Mode, Glide, Division, CV Recorder (CV In, Clock, Start, Bank Up/Down)

CV Outputs
CV Out, Gate Out, Start Of Sequence, End Of Sequence, Clock, CV Recorder CV Out (A, B, C, D and CV)

Sequencer Controls
64 Sliders and Step Select Buttons, Speed, Sequence Length, Gate Length, Play Mode, Glide, Division, Quantizer and Scale, Output Range, One-Shot Mode, Play/Pause and Stop, Global Play/Pause and Global Stop

Section Controls
Repeat Set, Mode Menu, Skip Step, Glide, Sequence Start Point, Gate

MIDI
MIDI In, MIDI Out, MIDI Clock Out (1 trigger per quarter note)

CV Recorder
Banks A, B, C and D available at corresponding sequencer patch bay outputs. All 7 banks selectable at CV Recorder CV Out by the Select control or Bank Up/Down inputs. CV is recorded and clocked through the CV Recorder CV and Clock inputs or Sequencer Rec Clock inputs.

Extra Features
Mode Menu (Skip Step Mode, Repeat Mode, Unipolar/Bipolar CV Output, MIDI Message, MIDI Channel, MIDI CC) and Firmware Updates

Casing:
Powder coated aluminum casing, silk screened printing and wooden side panels.

Dimensions
46.2 cm x 29 cm x 4 cm (L x W x H)
18.2" x 11.4" x 1.6" (L x W x H)

Net Weight
3.2 kg / 8.8 lb

Shipping Weight:
4.5 kg. / 9.9 lbs including power adapter and instruction manual.

Power Requirements:
9VDC power adapter. Only use the KOMA adapter shipped with the unit.

Accessories
Included: dust cover, manual and power supply unit.
Rackmount kit available separately
Read more
 3 in stock $1,804.95
Click for better price!
or call +44 20 7424 1960
quote 570602
Koma Elektronik Strom+ Power Module
Cat: 928123 Rel: 13 Mar 23
 
A strong, reliable and safe 4HP power solution for your modular system.
Notes: Strom+ is a strong, reliable and safe 4HP power solution for your modular system. The Strom+ power module includes many safety mechanisms to prevent your modules from being damaged. These include most importantly short-circuit protection, overvoltage protection and a replaceable main input fuse. See the full list below.

Strom+ also offers a current sensing technology that indicates current consumption of your system. LEDs of each rail will turn orange then red, when current consumption reaches or crosses the maximum load of that rail.

Strom+ has extremely low ripple, even under full load. This means better sound and stability for your modules.

One module can power multiple skiffs via Strom Passive Module, a Strom Connector Cable, or a KOMA Strom Busboard.

Technical Specifications

Inputs and Outputs

Output: 1.5A @ +12V | 1.5A @ +5V | 1.0 A @ -12V
Input: 15V, 4.6 A (center positive)

Safety Mechanisms

Replaceable input fuse. Protects the wall-plugged adapter. The KOMA Strom AC/DC adapter actually has its own protection mechanisms and will itself shutdown in most cases before the input fuse trips.
Input overvoltage. Strom+ works up to specification from 15V - 20V input and works out of specification up to 28V input.
Input reverse polarity protection
Output overvoltage protection
Output short-circuit protection
Output over current protection
Output undervoltage protection
All above output protections independent for each rail. If any rail fails, the whole module shuts down.
Connectors and Controls

Main DC-Input (15 VDC)

On/Off switch
Front panel connector to a passive Strom module
2 standard Eurorack 16-pin connectors (for modules or a flying busboard)
Back panel Strom connector to solid busboards

Dimensions

4HP
48mm without Eurorack power connector connected (distribute power via Strom connector cable)
52mm with Eurorack power cable connected
Read more
 1 in stock $128.32
17/7(ページ1/1)の商品
Cart subtotal: