IK Multimedia

Notes: Updated version of the hugely popular mobile audio interface. Just about as compact as it gets but with all the functionality you'd expect for getting quality sound in and out of mobile devices.

Supplier's Notes:
Make your go-to mic go farther

Like many of today's musicians, YouTubers, and broadcasters you probably rely on the professional sound quality you get from using an XLR microphone. But for mobile, on-the-go audio and video creation, XLR mics present some challenges. Many require phantom power, and at best, using them also means dragging along a laptop and boxy audio interface to get the mic preamps along with the phantom power you need.

iRig Pre 2 is a pocket-sized mic preamp that lets you easily use your XLR mics to record, perform and stream with your iPhone*, iPad, Android device or DSLR camera. The sequel to the best-selling mobile mic pre of all time, iRig Pre 2 delivers the same professional sound you're accustomed to, while adding direct monitoring, auto-switching wiring for use with digital cameras, and so much more.

All powered up

Need phantom power for your condenser mic? iRig Pre 2's 2 AA batteries provide true +48V phantom power (many other mobile mic preamps only offer 32V, degrading your mic's performance) for around 7 hours of continuous use.
To use your favorite dynamic or ribbon mic, simply turn off the phantom power and you're good to go for even longer, up to 20 hours!

Don't waste a take

A time-saving 3.5mm (1/8") headphone output now offers direct monitoring, so you can listen back to ensure the signal is perfect before you start recording or streaming!
It's perfect for all today's popular live-streaming and video recording apps, so you can hop from app to app with confidence you'll always sound your best.
And for DSLRs and digital cameras, it makes set up a snap without needing to dive into menus or set up alternate workarounds to monitor the sound.

Works in more situations

You can easily access your favorite apps while recording or performing by mounting the iRig Pre 2 to your mic stand or other convenient stage locations using the included Velcro strip slot. For secure mic stand mounting for your connected smartphone, tablet or digital camera, be sure to check out our iKlip series, which offers a choice of flexible-mounting options for a variety of scenarios.

Ready to rock, right out of the box

Even if you're new to mobile audio and video creation, you can get started right away by simply downloading two free IK Multimedia apps from the App store or Google Play: iRig Recorder FREE (our easy-to-use audio and video recording/editing app) and VocaLive FREE (our premium vocal processor for live performance and multi-track recording).
So get ready to break out of the box and start exploring the creative possibilities all around you, with the freedom of iRig Pre 2.

The Creator series from IK Multimedia puts you in the spotlight with fast and easy tools to help you create professional content. Its budget-friendly solutions are ideal for YouTubers, podcasters, live streamers and other social media platforms, and include a variety of mobile and studio-friendly microphones, interfaces and smartphone stands. With convenient features and flexible options, you'll be covered wherever and whenever inspiration strikes.

Technical Specifications:

Frequency response: from 20 Hz to 20 KHz +/- 1.5dB
EIN (@gain min): -113.5 dBA
EIN (@ gain max): -92.4dBA
THD+N: -90 dBA / 0,003%
Gain range: 48dB
Phantom max current: 6mA
Battery duration (Alkaline 2xAA): approx 20 hours when phantom is off, approx 7 hours when phantom is on

Includes:

iRig Pre 2
2xAA batteries
Velcro strip
Free apps for iOS and Android

Dimensions:

Size: 40mm/1.57" x 110mm/4.33" x 34mm/1.34"
Weight: 75g/2.65oz (batteries excluded)
Cables length: 40cm/15.75"

Compatibility:

iOS and Android Devices

Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.

DSLR Cameras

Compatible with most DSLR cameras equipped with 1/8" / 3.5mm jack microphone input.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Updated version of the hugely popular mobile audio interface. Just about as compact as it gets but with all the functionality you'd expect for getting quality sound in and out of mobile devices.

Supplier's Notes:
Make your go-to mic go farther

Like many of today's musicians, YouTubers, and broadcasters you probably rely on the professional sound quality you get from using an XLR microphone. But for mobile, on-the-go audio and video creation, XLR mics present some challenges. Many require phantom power, and at best, using them also means dragging along a laptop and boxy audio interface to get the mic preamps along with the phantom power you need.

iRig Pre 2 is a pocket-sized mic preamp that lets you easily use your XLR mics to record, perform and stream with your iPhone*, iPad, Android device or DSLR camera. The sequel to the best-selling mobile mic pre of all time, iRig Pre 2 delivers the same professional sound you're accustomed to, while adding direct monitoring, auto-switching wiring for use with digital cameras, and so much more.

All powered up

Need phantom power for your condenser mic? iRig Pre 2's 2 AA batteries provide true +48V phantom power (many other mobile mic preamps only offer 32V, degrading your mic's performance) for around 7 hours of continuous use.
To use your favorite dynamic or ribbon mic, simply turn off the phantom power and you're good to go for even longer, up to 20 hours!

Don't waste a take

A time-saving 3.5mm (1/8") headphone output now offers direct monitoring, so you can listen back to ensure the signal is perfect before you start recording or streaming!
It's perfect for all today's popular live-streaming and video recording apps, so you can hop from app to app with confidence you'll always sound your best.
And for DSLRs and digital cameras, it makes set up a snap without needing to dive into menus or set up alternate workarounds to monitor the sound.

Works in more situations

You can easily access your favorite apps while recording or performing by mounting the iRig Pre 2 to your mic stand or other convenient stage locations using the included Velcro strip slot. For secure mic stand mounting for your connected smartphone, tablet or digital camera, be sure to check out our iKlip series, which offers a choice of flexible-mounting options for a variety of scenarios.

Ready to rock, right out of the box

Even if you're new to mobile audio and video creation, you can get started right away by simply downloading two free IK Multimedia apps from the App store or Google Play: iRig Recorder FREE (our easy-to-use audio and video recording/editing app) and VocaLive FREE (our premium vocal processor for live performance and multi-track recording).
So get ready to break out of the box and start exploring the creative possibilities all around you, with the freedom of iRig Pre 2.

The Creator series from IK Multimedia puts you in the spotlight with fast and easy tools to help you create professional content. Its budget-friendly solutions are ideal for YouTubers, podcasters, live streamers and other social media platforms, and include a variety of mobile and studio-friendly microphones, interfaces and smartphone stands. With convenient features and flexible options, you'll be covered wherever and whenever inspiration strikes.

Technical Specifications:

Frequency response: from 20 Hz to 20 KHz +/- 1.5dB
EIN (@gain min): -113.5 dBA
EIN (@ gain max): -92.4dBA
THD+N: -90 dBA / 0,003%
Gain range: 48dB
Phantom max current: 6mA
Battery duration (Alkaline 2xAA): approx 20 hours when phantom is off, approx 7 hours when phantom is on

Includes:

iRig Pre 2
2xAA batteries
Velcro strip
Free apps for iOS and Android

Dimensions:

Size: 40mm/1.57" x 110mm/4.33" x 34mm/1.34"
Weight: 75g/2.65oz (batteries excluded)
Cables length: 40cm/15.75"

Compatibility:

iOS and Android Devices

Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standard.

DSLR Cameras

Compatible with most DSLR cameras equipped with 1/8" / 3.5mm jack microphone input.

Notes: Start connecting with the world

The original iRig Stream offered ground-breaking features for today's top apps that made it an overnight must-have for millions of creators. Now iRig Stream Solo brings comparable features and connectivity to a new level of affordability.

iRig Stream Solo is an easy-to-use audio interface for iPhone*, iPad and Android that lets you connect up to 3 distinct sources and mix them into your stream. Connect mixers or keyboards, your earbuds or iRig mics, and even audio played right on your device, and mix them together into a signal that's optimized for streaming and sent straight to your favourite apps.

It's all you need to start streaming in a compact and battery-powered format.

Mix and stream up to 3 audio sources

iRig Stream Solo makes it easy to connect all your audio sources and route them to a streaming or recording app. Send the audio output of your smartphone or tablet into iRig Stream Solo, mix it with external audio sources like mixers, DJ decks, keyboards and more. Add your voice from earbuds (or an iRig Mic) and send all 3 signals back to your device to popular apps like Instagram, or just your built-in camera app.

Plug in all your gear

2 line-level RCA inputs are perfect to connect DJ and multi-channel mixers, but are also great for keyboards, synth and drum machine setups, and more. Whether you're looking to stream your DJ set, record band practice, jam along with your favorite song, or even host a podcast, iRig Stream Solo lets you connect a massive range of gear.

Use a headset or a mic

A unique headphone/microphone jack is wired just like your smartphone so you can listen and talk over the other audio inputs simultaneously. It works with most headphones with a built-in mic and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre 2, giving you a wide range of options for any situation.
The overall input signal level (line + mic) is controlled with a single thumbwheel and optimized for streaming before being sent to your device and favourite apps.

Mix audio from your device

A special Loopback switch lets you route the audio output of your digital device (iPhone, iPad or Android) back into iRig Stream Solo to be mixed in with the other audio signals. This is perfect to jam or sing along with backing tracks and stream to another app, all on a single device.

Get connected, stay connected

iRig Stream Solo is easy to use with a captive TRRS cable to connect to your iPhone (Requires use of Apple's Lightning to 3.5 mm Headphone Jack Adapter (TRRS), iPad and Android. Its 1/8" mono Thru line output lets you send your audio to additional devices such as cameras, mixers and more. And with two AA batteries, you can enjoy hours of reliable performance anywhere.

Comprehensive compatibility

iRig Stream Solo works with any app that records or streams audio or video, so you'll never stop finding new ways to use it. To get you started, it includes iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high-quality audio and video recording app. Record, trim, edit and share, right from your device.

Specifications:

Power: 2x AA batteries
Metering: Battery status LED
Device Connection: captive 1/8" / 3.5 mm TRRS jack - CTIA/AHJ wiring standard
Dimensions: 45 x 105 x 34 mm
Weight (without batteries): 74 g

Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10 dBV
Head Room: 9 dB
Input Impedance: 15k Ohms
Frequency Response: from 20 Hz to 20 kHz (-3 dB)

Headset/Phones
Connector: 1/8" TRRS jack (CTIA wiring standard)
Supply voltage: >= 2,5 V
Microphone gain: Fixed at 27 dB
Headphone frequency response: from 20 Hz to 20 kHz (-3 dB)
Microphone frequency response: from 50 Hz to 20 kHz (-3 dB)
Headphone Level control: numbered thumbwheel

Thru out
Connector: 1/8" TRS jack
Frequency Response: from 20 Hz to 20 kHz (-3 dB)

Battery Life
50 hours (Alkaline batteries)

Package includes:
iRig Stream Solo interface
2x 1.5V AA battery

Compatibility
iOS and Android Devices
Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standardformat.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Start connecting with the world

The original iRig Stream offered ground-breaking features for today's top apps that made it an overnight must-have for millions of creators. Now iRig Stream Solo brings comparable features and connectivity to a new level of affordability.

iRig Stream Solo is an easy-to-use audio interface for iPhone*, iPad and Android that lets you connect up to 3 distinct sources and mix them into your stream. Connect mixers or keyboards, your earbuds or iRig mics, and even audio played right on your device, and mix them together into a signal that's optimized for streaming and sent straight to your favourite apps.

It's all you need to start streaming in a compact and battery-powered format.

Mix and stream up to 3 audio sources

iRig Stream Solo makes it easy to connect all your audio sources and route them to a streaming or recording app. Send the audio output of your smartphone or tablet into iRig Stream Solo, mix it with external audio sources like mixers, DJ decks, keyboards and more. Add your voice from earbuds (or an iRig Mic) and send all 3 signals back to your device to popular apps like Instagram, or just your built-in camera app.

Plug in all your gear

2 line-level RCA inputs are perfect to connect DJ and multi-channel mixers, but are also great for keyboards, synth and drum machine setups, and more. Whether you're looking to stream your DJ set, record band practice, jam along with your favorite song, or even host a podcast, iRig Stream Solo lets you connect a massive range of gear.

Use a headset or a mic

A unique headphone/microphone jack is wired just like your smartphone so you can listen and talk over the other audio inputs simultaneously. It works with most headphones with a built-in mic and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre 2, giving you a wide range of options for any situation.
The overall input signal level (line + mic) is controlled with a single thumbwheel and optimized for streaming before being sent to your device and favourite apps.

Mix audio from your device

A special Loopback switch lets you route the audio output of your digital device (iPhone, iPad or Android) back into iRig Stream Solo to be mixed in with the other audio signals. This is perfect to jam or sing along with backing tracks and stream to another app, all on a single device.

Get connected, stay connected

iRig Stream Solo is easy to use with a captive TRRS cable to connect to your iPhone (Requires use of Apple's Lightning to 3.5 mm Headphone Jack Adapter (TRRS), iPad and Android. Its 1/8" mono Thru line output lets you send your audio to additional devices such as cameras, mixers and more. And with two AA batteries, you can enjoy hours of reliable performance anywhere.

Comprehensive compatibility

iRig Stream Solo works with any app that records or streams audio or video, so you'll never stop finding new ways to use it. To get you started, it includes iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high-quality audio and video recording app. Record, trim, edit and share, right from your device.

Specifications:

Power: 2x AA batteries
Metering: Battery status LED
Device Connection: captive 1/8" / 3.5 mm TRRS jack - CTIA/AHJ wiring standard
Dimensions: 45 x 105 x 34 mm
Weight (without batteries): 74 g

Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10 dBV
Head Room: 9 dB
Input Impedance: 15k Ohms
Frequency Response: from 20 Hz to 20 kHz (-3 dB)

Headset/Phones
Connector: 1/8" TRRS jack (CTIA wiring standard)
Supply voltage: >= 2,5 V
Microphone gain: Fixed at 27 dB
Headphone frequency response: from 20 Hz to 20 kHz (-3 dB)
Microphone frequency response: from 50 Hz to 20 kHz (-3 dB)
Headphone Level control: numbered thumbwheel

Thru out
Connector: 1/8" TRS jack
Frequency Response: from 20 Hz to 20 kHz (-3 dB)

Battery Life
50 hours (Alkaline batteries)

Package includes:
iRig Stream Solo interface
2x 1.5V AA battery

Compatibility
iOS and Android Devices
Compatible with iPhone, iPad, iPod touch and Android devices with 1/8" / 3.5mm jack standard headset input (onboard or via adaptor) compliant with the CTIA/AHJ wiring standardformat.