安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Hungry Robot

ホーム  Labels  

Hungry Robot

Options
117/17(ページ1/1)の商品
Hungry Robot Attenuverter Desktop Module
Cat: 780999 Rel: 03 Sep 20
 
Attenuverter module
Notes: This module is a simple two channel attenuverter and voltage source. An attenuverter takes an input voltage and allows you to attenuate and invert the voltage (i.e. 4.2V input would allow you to create new voltages ranging from -4.2V to +4.2V). With no input present, the module acts as a voltages source (-5V to +5V range). As with all Hungry Robot "Modular Boxes" the Attenuverter can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-MINUS/PLUS (x2): Allows you to attenuate and invert the original incoming voltage. In absence of an input, this can be used a a voltage source

PATCH POINTS
-IN (x2): Patch in the voltage you want affected. Leaving empty and this will normalize to 5V for use as a voltage source.
-OUT (x2): The resulting voltage after passing through the attenuverter is output to other modules

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$92.62 SAVE 17%
 1 in stock $77.17
Click for better price!
or call +44 20 7424 1960
quote 780999
Hungry Robot Clockable LFO Desktop Module
Cat: 780980 Rel: 03 Sep 20
 
LFO module
Notes: The Clockable LFO brings multiple waveforms, CV control, subdivisions, and wave symmetry in a simple, user friendly package. LFO speed can be controlled by the tap tempo pushbutton, clock input, or over-sized Speed knob. There are three waveforms that can be selected by toggle and further modified by the Level and Symmetry knob. The Symmetry knob shifts the wave form from a symmetrical wave to a ramp up or ramp down waveform (or when using square wave, acts a pulse width control). Clock In and Clock Out for syncing with other devices. All knobs on the Clockable LFO can be manipulated with CV. As with all Hungry Robot "Modular Boxes" the Clockable LFO can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-SPEED: Sets the overall speed of the LFO. Turning this knob will override any tap or clocked tempo. This control is still affected by subdivision.
-LEVEL: Sets the level of the LFO output. Ranges from 0-10V peak-to-peak
-SYMMETRY: Sets the symmetry of the waveform. Shifting from ramp-down to ramp-up on triangle and sin waves. Adjusts pulse width on square.

SWITCHES
-SUBDIVISIONS: Selects subdivisions (x1,x2,#2). Automatically converts LFO speed.
-WAVESHAPE: Selects the waveshape of the LFO output (Sin, Triangle, Square)

PATCH POINTS
-SPD CV: CV input for Speed. Allows for CV control of this parameter.
-SYM CV: CV input for Symmetry. Allows for CV control of this parameter.
-LVL CV: CV input for Level. Allows for CV control of this parameter.
-CLK IN: Will sync to external clock. Will override the speed knob.
-CLK OUT: Outputs a 5V clock signal at 50% duty cycle. Can also be useful as a gate signal for your ADSR
-LFO OUT: Two outputs of final waveform. Both outputs are buffered for minimal signal attenuation. 10V Peak-to-Peak

PUSHBUTTON
-CENTER PUSHBUTTON: On-board tap tempo. Will override the speed knob.

Dimensions: 4.7" x 3.7" x 1.96"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$183.93 SAVE 17%
 1 in stock $153.27
Click for better price!
or call +44 20 7424 1960
quote 780980
Hungry Robot CV Keys Desktop Module
Cat: 780984 Rel: 03 Sep 20
 
CV module
Notes: The Hungry Robot CV Keys is the perfect utility for incorporating 1V/OCT, chromatic semitones into a modular system when it is not convenient to use midi keyboards or a midi-to-CV interface. This small pushbutton keyboard has just enough functionality for most modular users and provides very accurate 1V/OCT tracking. The CV keys has a full octave keyboard as well as octave switch allowing you to jump between octaves on the fly. The Hold button latches the gate signal for handsfree use. It uses last note priority, has two unique gate modes, two buffered outputs, and a Transpose jack that let you patch in an external sequence and transpose it chromatically through the CV keys.

KNOBS
-OCTAVE: Cycles between 6 octaves

PUSHBUTTONS
-HOLD: When LED is lit, Hold is on. When Hold Mode is on, the Gate and Retriggered Gate will latch so you don't have to hold down the key
-KEYS: 13 note, single octave keyboard. Last note priority

PATCH POINTS
-TRANSPOSE: Patching in a control voltage (i.e. from a sequencer) allows you to transpose the sequence according to the notes you play
-GATE: Standard 5V gate outputted when a key is played or when Hold mode is active
-GATE (Retriggered): 5V gate that retriggers with every new note played. NOTE: To retrigger an ADSR, you must use a short release setting
-CV OUT: Two buffered 1V/OCT outputs to patch to your multiple VCOs

Dimensions: 4.7" x 3.7" x 1.96"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$183.93 SAVE 17%
 1 in stock $153.27
Click for better price!
or call +44 20 7424 1960
quote 780984
Hungry Robot CV Sequencer Desktop Module
Cat: 780990 Rel: 03 Sep 20
 
CV sequencer module
Notes: Simple but effective. The Hungry Robot Modular CV Sequencer provides you with eight steps of voltage-controlled sequencing. Each step features an individual control knob to adjust the voltage with an approximate range of 4V. With an intelligent and intuitive design, the Hungry Robot CV Sequencer is the ideal choice for any modular rig.

This handy little device isn't equipped with an internal clock. Instead, a CLOCK input allows you to patch in your 4 to 5V external clock signal to advance the sequencer through the steps. A RESET push button allows you to transport your sequence back to the beginning, whilst a PAUSE button can be held to pause your sequence and re-commence when the button is released. Powered by a standard 9V DC centre-negative power supply, the Hungry Robot Modular CV Sequencer is easy to use without the need for costly extras such as powered cases or racks. The table-top format is low-cost and simple, and gives you a highly-accessible complete modular system. It's also the perfect companion to integrate with other synthesizers and instrumentation.
Read more
MRP:$122.62 SAVE 17%
 1 in stock $102.18
Click for better price!
or call +44 20 7424 1960
quote 780990
Hungry Robot Dual VCA Desktop Module
Cat: 780988 Rel: 03 Sep 20
 
Dual VCA desktop module
Notes: This basic building block of a modular system is indispensable. The Hungry Robot VCA provides 2 independent, high quality VCAs. These VCAs are DC coupled which means you can patch in audio sources as well as CV sources (though its primary function is for audio). As with all Hungry Robot "Modular Boxes" the VCA can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-CV Knobs: The two knobs are attenuators for the incoming CV inputs

PATCH POINTS
-IN: Patch in an Audio signal.
-CV: Patch in an envelope, LFO, or any CV source to provide voltage controlled amplification to the incoming source
-OUT: Output of VCA

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$122.62 SAVE 17%
 1 in stock $102.18
Click for better price!
or call +44 20 7424 1960
quote 780988
Hungry Robot El Castillo Arpeggiating Reverb Pedal
Cat: 780927 Rel: 03 Sep 20
 
Reverb pedal
Notes: El Castillo is an arpeggiating reverb that takes pitch-bent reverb to an entirely new level.

It uses a unique combination of 3 circuit blocks (reverb, pitch-shift, and delay) to create a highly experimental, ambient reverb.

REVERB - The reverb block is the heart of the pedal. It uses the same high quality reverb brick found in my other reverb pedals. It has two controls: Level and Regen. The Level control increases the amount of wet signal, without effecting the dry signal. The Regen control controls the amount of signal fed through the feedback loop. Turing up the Regen knob will increase the decay and also the number or arpeggiations.

PITCH-SHIFT - The pitch-shift block is located in the feedback loop of the reverb. Adding a pitch-shift to the feedback signal creates a stair step effect. Each time the signal travels through the feedback loop, it will shift the pitch of the wet signal up or down. The pitch shifting section is controlled by the Quantize mode switch and the Pitch Knob (small, middle knob).

DELAY - The delay block is also located inside the feedback loop. It is a simple, single repeat delay that can range from 0-800ms. This feature causes the signal to delay going through the pitch-shift block. With the delay time set at minimum, the stair stepping effect happens very quickly. As you increase the delay time, the pitch intervals are stretched out and it creates a very gradual pitch arpeggiation. The delay length is determined by the Stretch knob.

MODES - El Castillo has 2 modes of operation: Un-Quantized and Quantized. The toggle switch selects the mode and determines the function of the Pitch knob.

---In the Un-Quantized mode (toggle to the left), the pitch knob has a free-range and can select any pitch interval between -1 octave and +1 octave. At 12 o'clock, there is zero pitch-shift.

---In the Quantized mode (toggle to the right), the pitch-shift is locked to -1 octave and +1 Octave. Turning the pitch knob crossfades between the two octave shifts to allow both to be heard at once or separately. Turning the knob fully to the left provides only octave down intervals. Turning the knob to the right provides only octave up intervals (traditional shimmer). At 12 o'clock, there is a 50/50 blend of octave up and octave down intervals.

Current Draw: 113 mA

Switching: True-Bypass

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$268.73 SAVE 17%
 1 in stock $223.93
Click for better price!
or call +44 20 7424 1960
quote 780927
Hungry Robot Looping ADSR Desktop Module
Cat: 780975 Rel: 03 Sep 20
 
ASDR module
Notes: The Looping ADSR is an extremely versatile envelope generator. It can act as a traditional ADSR envelope requiring a gate signal to activate or as a looping ADSR. Envelopes can be output with both linear and exponential curves. In Loop Mode it repeats the cycle of Attack, Decay, & Release. Once the Release phase is complete, it loops back to the Attack and begins the cycle again. The Looped envelope can be further manipulated with the Loop Scale knob. Loop Scale shrinks the overall size of the envelope while keeping the ratio of A:D:R identical. All knobs on the Looping ADSR have CV input. As with all Hungry Robot "Modular Boxes" the Looping ADSR can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-ATTACK: Sets the attack length (1st stage of ADSR cycle). Determines how long it takes to come to full voltage after gate is applied (up to 10 sec.)
-DECAY: Sets the decay length (2nd stage of ADSR cycle). Determines how long it takes to go from full voltage to sustain voltage (up to 10 sec.)
-SUSTAIN: Sets the sustain level. Determines what voltage the envelope returns to after decay stage
-RELEASE: Sets the release length (Final stage of ADSR cycle). Determine how long it takes to return to 0V after gate is released (up to 10 sec.)
-LOOP SCALE: When in loop mode, this knob scales down the length of the envelope while keeping the ratios identical

SWITCHES
-LIN/EXP: Selects the envelope type: linear vs. exponential curve
-LOOP/ADSR: Switches between Loop and ADSR mode. LOOP turns the loop on. ADSR is a traditional ADSR requiring a gate signal
-RPT./GATE: Works only in LOOP mode. RPT. automatically repeats the loop without a gate. GATE mode requires a gate to begin looping.

PATCH POINTS
-LS.CV: CV input for Loop Scale. Allows for CV control of this parameter.
-A.CV: CV input for Attack. Allows for CV control of this parameter.
-D.CV: CV input for Decay. Allows for CV control of this parameter.
-S.CV: CV input for Sustain. Allows for CV control of this parameter.
-R.CV: CV input for Release. Allows for CV control of this parameter.
-GATE: Gate input for ADSR mode as well as Gate/Loop mode
-OUT: Output of final envelope for all modes.

Dimensions: 4.7" x 3.7" x 1.96"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$183.93 SAVE 17%
 1 in stock $153.27
Click for better price!
or call +44 20 7424 1960
quote 780975
FORTHCOMING
Hungry Robot Output Module Desktop Module
Cat: 780994
 
Output module
Notes: The Hungry Robot Output Module allows users to interface your modular system with headphones, speakers, and recording interfaces. It uses a high quality amplifier circuit to boost the signal to the level you need. It accepts both mono and stereo signals. Plug in you inputs and output however you need, internal switching will automatically route the signal to where it needs to be based on what you have plugged in. As with all Hungry Robot "Modular Boxes" the Output Module can be powered with a simple 9V DC, Negative Center power supply.

KNOB
-VOLUME: Controls the overall volume of the output. Adjust to taste.

PATCH POINTS
-IN(L/MONO): Left input. Use this if you are running mono and want it split into stereo.
-IN(R): Right Input
-OUT(L/STEREO): Left output. Use this for stereo situations (TRS/Headphones)
-OUT(R): Right Output

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$122.62 SAVE 17%
coming soon $102.18
Hungry Robot Slew Desktop Module
Cat: 780996 Rel: 03 Sep 20
 
Slew generator module
Notes: This module is a dual channel Slew generator. In short, slew generators restrict changes in voltage. The most common use of this is to add portamento or glide to a fluctuating voltage. As with all Hungry Robot "Modular Boxes" the Slew can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-SLEW KNOBS (x2): Adjusts the amount of slew on each channel. Max slew time is approximately 750ms (patch both channels together for 1500ms)

PATCH POINTS
-IN (x2): Patch in the CV that you would like to add Slew or Portamento
-OUT (x2): Patch this to where you would like the resulting Slewed CV to go

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$92.62 SAVE 17%
 1 in stock $77.17
Click for better price!
or call +44 20 7424 1960
quote 780996
Hungry Robot The Borderland (Lite) Ambient Digital Reverb With Octave Pedal
Cat: 780924 Rel: 03 Sep 20
 
Digital reverb with octave pedal
Notes: The Borderland (lite) contains the same base circuitry and reverb algorithm as its older sibling, but without the modulation options. It contains the same lush reverb algorithm and retains the three octave mode. It is perfect if you love the tone of The Borderland, but don't need the complex LFO and modulation options and just want a really solid ambient reverb.

Pressing down on the right footswitch sends the pedal into near infinite sustain with the trails teetering on the edge of self-oscillation. The Effect and Clean knobs allow you to dial in the perfect ratio of wet and dry signals. Adjusting the Ambiance and Brilliance knobs sets the length of decay and the cutoff frequency of the onboard low pass filter, ranging from a small room reverb to a cavernous, dark hall reverb.

The Borderland (lite) is the perfect for creating lush, ambient textures.

Knobs

"Clean" - Sets the volume of the original dry signal
"Ambiance" - Sets the overall decay of the reverb trails

"Brilliance" - Sets the cutoff frequency of the low pass filter

"Effect" - Sets the volume of the wet reverb signal

Toggle Switch

Octave - Enables a three octave reverb algorithm. Taking the original reverb signal and mixing it in with an octave up and octave down reverb.

Footswitches

Left - Master On/Off

Right - Sends the pedal into near infinite sustain

Other
"Secret Mode" - There is a secret mode that can be selected internally by way of a dipswitch. This mode replaces the reverb code with delay code. The "Ambiance" knob is now delay feedback and the "Brilliance" knob is now delay time.

Switching: True-Bypass

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$241.33 SAVE 17%
 1 in stock $201.10
Click for better price!
or call +44 20 7424 1960
quote 780924
Hungry Robot The Karman Line Joystick Delay & Oscillation Device Pedal
Cat: 780928 Rel: 03 Sep 20
 
Delay & oscillation device pedal
Notes: The Karman Line is a modulating joystick delay and oscillation device that features a heavily filtered, lo-fi delay line with vinyl inspired pitch modulation.

The repeats on The Karman Line are dark and overdriven. The not-so-subtle grittiness provides the perfect tone for creating a deeply textured, lo-fi wall-of-sound. The Karman Line was designed for glitchy experimentalists, but can find its place in many musical settings.

The Karman Line features vinyl-esque pitch modulation centered on an all analog, light-based LFO. The modulation mimics the sound of slowing down a record player with your finger. The modulation can go from subtle to extreme, borderline obnoxious (in a good way) pitch bending.

The most intriguing aspect of The Karman Line is the implementation of a joystick. The Karman Line employs a delay chip that creates an audible warp as you manipulate the delay time, controlled by the Y-Axis of the joystick. The X-Axis controls the rate of modulation.

The "Swell" footswitch (center) and "Launch" footswitch (right) provide two methods for bringing the circuit into ramping oscillation. Both footswitches work by overloading the circuit with out-of-control repeats (a.k.a. oscillation).

The "Swell" footswitch is a momentary switch that allows you to create a ramping volume swell at any time. It lets the repeats crash into each other, getting louder and louder with each repeat. When you let go, the repeats return to their normal setting.

The "Launch" footswitch is a latching switch that creates a below the mix oscillation that can be manipulated with the joystick for outer space noises. The joystick also acts as a pitch selector. With the "Launch" switch activated, the O.Mix knob overrides the Mix knob to allow you to dampen the volume of the oscillation.

Max delay time is just under 500ms in "GUITAR MODE" and 1000ms in "BASS MODE." Mode is controlled by an internal dipswitch.

Current Draw: 37 mA

Switching: True-Bypass

Dimensions: 5.7" x 4.7" x 1.5"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$316.99 SAVE 17%
 1 in stock $264.15
Click for better price!
or call +44 20 7424 1960
quote 780928
Hungry Robot The Lumen State Variable Overdrive Pedal
Cat: 780918 Rel: 03 Sep 20
 
Overdrive pedal
Notes: The Lumen is a State Variable FET-Based Overdrive. It marks a return to the overdrive world for Hungry Robot Pedals.

Under the hood, it contains an active State Variable Filter, a type of filter that is common place in the synth world. State Variable Filters offer more clarity and presence than standard passive tonestacks. A typical passive tonestack works by removing tonal content, a State Variable Filter works by actively amplifying frequencies that are already present in your signal. The filter is actually made up of 3 individual filters (low pass, band pass, high pass) that split the incoming signal into 3 frequency ranges and amplifies those ranges without tone loss.

While designing The Lumen, Hungry Robot challenged themselves to create an overdrive that used no diode clipping. The most common approach for an overdrive is to send an amplified signal into a clipping section where diodes chop up the waveform and distortion is create. I opted for a more natural approach of cascading FET gain stages. The distortion is created by soaking the transistors with gain. To me, this method provides a more organic, tube-like saturation than a clipping section.

And to top it all off, The Lumen also has a clean blend, allowing you to mix back in some of your clean tone. At 12 o'clock, the clean signal is near unity gain. Past 12 o'clock, it amplifies your clean signal.

Knobs:

"Drive"- Sets the gain level on the first FET stage. It is normal for the knob to crackle when turned.

"Clean" - Sets the level of the clean blend. Past 12 o'clock is boost.

"Level" - Sets the volume of the drive signal.

"H.P" - Sets the level of the high pass filter.

"B.P" - Sets the level of the band pass filter.

"L.P" - Sets the level of the low pass filter.

Switching: True-Bypass

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$215.24 SAVE 17%
 1 in stock $179.36
Click for better price!
or call +44 20 7424 1960
quote 780918
Hungry Robot The Moby Dick V2 Lofi Tape Delay With Modulation & Tap Tempo Pedal
Notes: The Moby Dick V2 brings up to date one of the first pedals that put Hungry Robot on the map. The original Moby Dick is well known for its chimey, tape-emulating delay line with slight lo-fi imperfections and subtle modulation; a "back-to-basics" delay in the world of multi-mode DSP delays.

The V2 has an obviously smaller footprint, but the most exciting changes lie in the circuit updates. When working on the V2, Hunry Robots wanted to further explore the sonic capabilities of the Moby Dick tape-emulation, rather than a miniature version of the pedal- specifically in a lo-fi, wrecked-tape context.

One of the magical qualities of recording to tape is the lovely saturation. The original Moby Dick had a gritty, saturated quality, but in the V2, this quality was pushed to its limit. A "Lo-Fi" knob which allows you to dial in additional tape saturation to the delay line. This is done by applying pre-gain amplification to the front end of the delay chip, resulting in a wonderfully organic character when gain is applied.

The capabilities of the modulation were also expanded. The original Moby Dick had a very subtle chorusing effect. Though it sounded great, it was admittedly subtle. The V2 increases the modulation depth dramatically, allowing it to travel beyond subtle chorusing into more extreme pitch bending territory. The "Mod" in conjunction with a cranked "Lo-Fi" knob creates the most amazing broken tape-deck quality, but when these knobs are dialed back it retains the overall character of the original.

Current Draw: 30 mA

Switching: True-Bypass

Dimensions: 4.7" x 2.6" x 1.5"

Delay Time: Approximately 1000ms

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$241.33 SAVE 17%
 1 in stock $201.10
Click for better price!
or call +44 20 7424 1960
quote 780925
Hungry Robot The Monastery Dual Channel Polyphonic Octaver Pedal
Cat: 780926 Rel: 03 Sep 20
 
Polypohnic octave generator pedal
Notes: The Monastery is a Dual Preset, Polyphonic Octave Generator that allows for simultaneous octave up and octave down with minimal latency and excellent tracking anywhere on the neck, even with multiple notes. The Monastery is inspired by the rich, multi-layered, timbre of vintage organs with its subtle Leslie warble.

The Monastery features highly intuitive controls. Hungry Robots decided to deviated from the standard three knob "Dry,Up,Down" controls used in many octave pedals and went for a more intelligent crossfade/pan arrangement. The biggest advantage of this setup is that the volume remains at unity-gain no matter where you set the knobs. The left knobs are the "Dry/Wet" controls. They adjust the ratio of wet and dry and can go from 100% wet to 100% dry with an even split at twelve o'clock. The right knobs are the "+/-" knobs. They work in a similar matter, but control the ratio of octave up and octave down.

The most compelling aspect of The Monastery is the dual preset function. You can seamlessly cycle between two presets with the right footswitch. The top LED denotes which row of controls is active. If the LED is lit, the top row of knobs is active. If the LED is unlit, the bottom row is active.

Current Draw: 74 mA

Switching: True-Bypass

Dimensions: 4.7" x 2.6" x 1.5"

Powering: 9V DC - Negative Center - 2.1mm Barrel

Read more
MRP:$241.33 SAVE 17%
 1 in stock $201.10
Click for better price!
or call +44 20 7424 1960
quote 780926
Hungry Robot The Stargazer V2 Dual Channel Ambient Reverb Pedal
Cat: 780922 Rel: 03 Sep 20
 
Reverb pedal
Notes: The Stargazer V2 is the follow up to one of Hungry Robots' most loved pedals. The original Stargazer has found it place on the boards of hundreds of musicians around the world. The intent was to keep the overall essence of the orignal the same while expanding its functionality. The "Stargazer" sound that many have fallen in love with remains unchanged with its classic "hall" and "sparkle" modes.

So, what's new? The most exciting change is the "simultaneous, parallel processing" of the two channels. With the new Stargazer, both channels can be used at the same time (the original version only allowed for you to use one channel at a time). The V2 has two independently voiced reverbs that can be stacked in parallel. Layering the two channels makes for an even more lush reverb tone with added depth.

The most obvious change is the physical size of the pedal; The PCB was designed more efficiently without major changes to the circuit.

The "Sparkle" switch has been removed, but both reverb modes are still available. The left channel (red knobs) is the "HALL" channel and is a darker hall-style reverb. The right channel (blue knobs) is the "SPARKLE" channel and is a sparkly, bright reverb that has a shimmery quality without an octave shift.

LEFT CHANNEL - HALL
RIGHT CHANNEL - SPARKLE

Current Draw: 70 mA

Switching: Buffered Bypass

Dimensions: 4.7" x 2.6" x 1.5"

Powering: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$241.33 SAVE 17%
 1 in stock $201.10
Click for better price!
or call +44 20 7424 1960
quote 780922
Hungry Robot VCF Desktop Module
Cat: 780987 Rel: 03 Sep 20
 
VCF module
Notes: Lovely little mono filter module in a compact desktop format. Based on the classic Prophet 5 filter, ideal for processing synths and signals, hooking up to Eurorack or other Hungry Robot modules.

Supplier's Notes:

The Hungry Robot VCF is an all analog, 4-pole low pass filter with a self-oscillating resonance control. It is a close replication of the filter circuit found on the famous Prophet 5. It uses a HM2040 which is a high quality, faithful replication of the original SSM2040 chip. This resonant filter has a beautiful tonal quality. The over-sized knobs provide a satisfying tactile response. The cutoff frequency can be controlled by external control voltage. It has a built-in attenuator and invert switch for the incoming CV. CV input does not track at 1V/Oct, but is scaled to act as a VCA when a 5V signal is applied to CV input. As with all Hungry Robot "Modular Boxes" the VCF can be powered by a simple 9V DC, Negative Center power supply.

KNOBS
-FREQUENCY: Sweeps the cutoff frequency of the filter.
-CV: Attenuator for incoming CV input.
-RESONANCE: Sets resonance of filter. Small volume drop is to be expected. Will self-oscillate at higher settings.

SWITCHES
-INVERT: Inverts the incoming CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-IN: Patch Audio Signal In
-CV: CV input for Frequency. Allows for CV control of this parameter.
-OUT: Patch Audio Signal Out

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$183.93 SAVE 17%
 1 in stock $153.27
Click for better price!
or call +44 20 7424 1960
quote 780987
Hungry Robot VCO Desktop Module
Cat: 780965 Rel: 03 Sep 20
 
VCO module
Notes: The Hungry Robot VCO is an all-analog, low cost, workhorse of a VCO. It can output triangle, sawtooth, and square waveforms simultaneously with tremendous bass response. The VCO has exceptional 1V/OCT tracking with FM modulation. The FM modulation input has a built-in CV attenuator as well as an inversion switch. The square wave has PWM with a built-in CV attenuator. As with all Hungry Robot "Modular Boxes" the VCO can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-COARSE: Provides a wide sweep of output frequencies
-FINE: Provides a narrow sweep of output frequencies for fine tuning
-PWM: Attenuator for the PWM CV input.
-FM: Attenuator for the FM CV input

SWITCHES
-INVERT: Inverts the incoming FM CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-1V/OCT: Input for 1V/OCT tracking
-FM: CV input for Frequency Modulation
-PWM: CV input for Pulse Width Modulation
-TRIANGLE: Triangle waveform output
-SAWTOOTH: Sawtooth waveform output
-SQUARE: Square waveform output

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel
Read more
MRP:$183.93 SAVE 17%
 1 in stock $153.27
Click for better price!
or call +44 20 7424 1960
quote 780965
117/17(ページ1/1)の商品

Filter

Hungry Robot
Release Date
Featured
Close