安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Happy Nerding

ホーム  Labels  

Happy Nerding

Options
15/5(ページ1/1)の商品
FORTHCOMING
Happy Nerding Dual xFade Module (black faceplate)
Cat: 805965 Rel: 31 Mar 21
 
Compact voltage controlled crossfader suitable for both audio and CVs
Notes: Dual xFade is a compact voltage controlled crossfader suitable for both audio and CVs. Smaller knobs set manual crossfade between A<>B, and bigger knobs are CV attenuverters. LEDs show the adjusted positive and negative CV sides for easy monitoring.

Upper inputs (section 1) are normalled to lower inputs (section 2). Thus the same signal pair A&B can be differently crossfaded in both sections.

The switch clones section's 1 controls to the section 2, which is useful to make stereo Dry/Wet adjustment or stereo VCA.

This module can be used as:

two independent crossfades

two independent VCAs

stereo crossfade or Dry/Wet control

stereo VCA

panner

Four jumpers on the back can give optional 5x amplification for each A or B input. Sot it is easy to crossfade modular level with linear level from pedals. Installed jumpers give 1x amplification, removing jumpers gives 5x amplification.

Output 1 is mixed with output 2 if left unconnected.
Read more
MRP:$170.31 SAVE 17%
coming soon $141.92
FORTHCOMING
Happy Nerding Dual xFade Module (silver faceplate)
Happy Nerding Dual xFade Module (silver faceplate) (CV modulation/dual & stereo/panning/utility/ VCA synth module)
Cat: 805969 Rel: 31 Mar 21
 
Compact voltage controlled crossfader suitable for both audio and CVs
Notes: Dual xFade is a compact voltage controlled crossfader suitable for both audio and CVs. Smaller knobs set manual crossfade between A<>B, and bigger knobs are CV attenuverters. LEDs show the adjusted positive and negative CV sides for easy monitoring.

Upper inputs (section 1) are normalled to lower inputs (section 2). Thus the same signal pair A&B can be differently crossfaded in both sections.

The switch clones section's 1 controls to the section 2, which is useful to make stereo Dry/Wet adjustment or stereo VCA.

This module can be used as:

two independent crossfades

two independent VCAs

stereo crossfade or Dry/Wet control

stereo VCA

panner

Four jumpers on the back can give optional 5x amplification for each A or B input. Sot it is easy to crossfade modular level with linear level from pedals. Installed jumpers give 1x amplification, removing jumpers gives 5x amplification.

Output 1 is mixed with output 2 if left unconnected.
Read more
MRP:$170.31 SAVE 17%
coming soon $141.92
Happy Nerding FM AID Through-Zero Linear Frequency Modulator Module (silver)
Cat: 795454 Rel: 11 Nov 20
 
Frequency modulator module
Notes: Clever FM module that does digital-style through-zero FM using analogue circuits. Use any signals from other modules as your carrier and modulator, then phase modulate or wavefold in the FM Aid.

Supplier's Notes:
FM AID is a module designed to perform through-zero linear Frequency Modulation (FM) in the analog modular world. Any arbitrary signals can be used as a Carrier and Modulator. The module copies FM in how it is done in digital implementation, but in a completely analog circuit free of digital aliasing artifacts. Digital or software FM oscillators are mainly based on a ramp waveform which is then shaped to other waveforms. This is also represented in the FM AID module: sawtooth signal is expected on the Carrier input to give the indicated sine, triangle, sawtooth and square waveforms on the respective outputs. However the user is not limited to only use sawtooth for the Carrier and any other signal can be plugged giving many complex waveforms at the outputs.

All known FM tricks from digital implementation are also applied - you can endlessly experiment with the Carrier/Modulator frequency ratios, Modulation index (FM knob), Modulator's amplitude shaping (CV knob), feedback FM (output is fed back to the Modulator's input) and many other.
Carrier input has normalled connection to the Modulator's input. This internal routing is disconnected each time a plug is inserted in the Modulator's input. That is a handy option which allows the module to be used with only one signal source - this single signal will act as Carrier and Modulator at the same time. There won't be any frequency differences between Carrier and Modulator in this case, but many interesting wave folding sounds will be available anyway.

Technically speaking FM AID uses Phase Modulation, not Frequency Modulation. The sonic difference is that the produces sound is brighter.

SPECIFICATIONS

Carrier input level: -5V ... + 5V (can also accept inputs ranging from -1V ... +1V] to [-12V ...+12V] / [-15V ...+15V] using onboard trimmer)

Modulator input level: preferably -5V ... + 5V

CV input level: preferably -5V ... + 5V

outputs level: -5V ... + 5V

outputs impedance: 1 kOhm

module depth: 3 cm or 1,5 inches

power consumption: +45 /-45 mA at +/-12 Vdc, +50 /-50 mA at +/-15 Vdc
Read more
MRP:$197.56 SAVE 32%
 2 in stock $133.97
Click for better price!
or call +44 20 7424 1960
quote 795454
FORTHCOMING
Happy Nerding TriTone Good-Natured Equaliser Module (black faceplate)
Cat: 804575 Rel: 31 Mar 21
 
Distortion/equaliser/filter synth module
Notes: TriTone is a three section EQ plus saturator. Inner knobs control frequency and outer knobs control +- gain. All these sections Hi Shelf, Band Pass and Low Shelf are having + 20 db of gain and 30 db of reduction. Each section can work independently or they can be serially connected by the switches. Middle input in each section accepts CV for its frequency, so all three sections can be individually FMed by the external CVs.

If the inputs are fed with the modular level signals (+- 5V), then there is little room for "plus" EQ gains before saturation starts. In this case the input level should be attenuated first, if saturation is not desired and much "plus" gain is needed. Otherwise saturation drastically enriches the tone and the module works like very flexible overdrive FX.

When the switches are set to upper positions, then all three sections work independently. With the maximum gain reduction (CCW position) of the upper section (Hi Shelf) it becomes a useful kind of Low Pass filter. On the contrary - maximum gain reductions of the lower section (Low Shelf) makes it a High Pass filter.

Please note the internal routing done by the switches: the output of the uppers section is added to the input of the subsequent lower section. If nothing is connection to this lower sections' input, then only the upper section's output is processed. This makes it a 3 band EQ with the switches set to lower position. Having separated inputs opens up more possibilities over ordinary EQs.

6 HP, 45 mm deep
55 mA +12V
65 mA -12V
Read more
MRP:$208.46 SAVE 21%
coming soon $164.63
FORTHCOMING
Happy Nerding TriTone Good-Natured Equaliser Module (silver faceplate)
Cat: 804582 Rel: 31 Mar 21
 
Distortion/equaliser/filter synth module
Notes: TriTone is a three section EQ plus saturator. Inner knobs control frequency and outer knobs control +- gain. All these sections Hi Shelf, Band Pass and Low Shelf are having + 20 db of gain and 30 db of reduction. Each section can work independently or they can be serially connected by the switches. Middle input in each section accepts CV for its frequency, so all three sections can be individually FMed by the external CVs.

If the inputs are fed with the modular level signals (+- 5V), then there is little room for "plus" EQ gains before saturation starts. In this case the input level should be attenuated first, if saturation is not desired and much "plus" gain is needed. Otherwise saturation drastically enriches the tone and the module works like very flexible overdrive FX.

When the switches are set to upper positions, then all three sections work independently. With the maximum gain reduction (CCW position) of the upper section (Hi Shelf) it becomes a useful kind of Low Pass filter. On the contrary - maximum gain reductions of the lower section (Low Shelf) makes it a High Pass filter.

Please note the internal routing done by the switches: the output of the uppers section is added to the input of the subsequent lower section. If nothing is connection to this lower sections' input, then only the upper section's output is processed. This makes it a 3 band EQ with the switches set to lower position. Having separated inputs opens up more possibilities over ordinary EQs.

6 HP, 45 mm deep
55 mA +12V
65 mA -12V
Read more
MRP:$209.83 SAVE 22%
coming soon $164.63
15/5(ページ1/1)の商品

Filter

Happy Nerding
Release Date
Featured
Close