安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Future Sound Systems

View:
Options
111/11(ページ1/1)の商品
Cat: 604233 Rel: 09 Mar 16
 
3.5mm jack plug connected to bipolar LED light, for purely aesthetic purposes - compatible with Eurorack systems
Notes: 3.5mm jack plug connected to bipolar LED

Red LED indicates positive voltage.

Yellow LED indicates negative voltage.
Read more
 2 in stock $4.90
Cat: 604235 Rel: 09 Mar 16
 
3.5mm jack plug connected to bipolar LED light, for purely aesthetic purposes - compatible with Eurorack systems
Notes: 3.5mm jack plug connected to bipolar LED.

Blue LED indicates positive voltage.

Red LED indicates negative voltage.
Read more
 4 in stock $5.10
Cat: 604239 Rel: 09 Mar 16
 
3.5mm jack plug connected to bipolar LED light, for purely aesthetic purposes - compatible with Eurorack systems
Notes: 3.5mm jack plug connected to bipolar LED

Green LED indicates positive voltage.

Red LED indicates negative voltage.
Read more
 1 in stock $5.10
Cat: 604241 Rel: 09 Mar 16
 
10-16 pin eurorack ribbon cable, compatible with Doepfer-style modules
Notes: 10-pin to 16-pin 25cm Eurorack ribbon cable.

Compatible with Doepfer-style modules.

Red stripe = -12V
Read more
 1 in stock $2.55
Cat: 634773 Rel: 15 Dec 16
 
9 input/9 output pin matrix synth module - 24HP wide
Notes: The MTX9 presents a new take on an old classic - the pin matrix, famously incorporated into EMS and Maplin synthesizer designs. The MTX9 provides 9 inputs and 9 outputs to be patched to one another, whilst allowing for passive splitting of one input to several outputs and averaging summation of several inputs to one output (or more).

Each component of the matrix has been designed to use standard parts - the pins are 2mm banana test plugs and all cards of the matrix are easily replaceable. Whilst the matrix is currently passive, an active expander card will be available from FSS soon. The MTX9 is supplied with a dry-wipe marker and 10 banana pins as standard, with spares available from FSS.
Read more
 3 in stock $90.90
Click for better price!
quote 634773
Cat: 674886 Rel: 15 Feb 18
 
Eurorack buffer board
Notes: Active buffer board for the MTX9. Presents unity mixing and buffered splitting. Supplied with all necessary cabling and hardware.
Read more
 2 in stock $49.01
Click for better price!
quote 674886
Cat: 614853 Rel: 06 Jun 16
 
4 channel mixer eurorack synth module - 4HP wide
Notes: The MX1 mixer module from FSS is designed to present a compact, affordable mixing solution for Eurorack users. The MX1 gives four audio inputs in as many HP, with both normal and phase-inverted outputs available.

The level controls of the MX1 are logarithmic, but the channels are DC coupled, so CVs can be summed together using the MX1 if necessary.

The MX1 provides unity gain of each channel when the level control is fully clockwise, meaning that there is no loss of signal level when mixing. This also allows for the MX1 to be overdriven, especially if the same source is multipled to the four inputs or the "normal" output is fed back into one of the inputs.

A set of expansion headers also allow for the FSS P.O.C.A. VAC1 and Whitehall SW1 modules to be used alongside the MX1 without any patching required, when using the MX1x expander accessory.
Read more
 1 in stock $64.33
Click for better price!
quote 614853
Cat: 734840 Rel: 15 Jul 19
 
Analogue VCO focused on all aspects of modulation - 12HP
Notes: The OSC1 from Future Sound Systems presents a voltage-controlled analogue oscillator with a few features unexpected of a basic oscillator, with a particular focus on covering all bases of signal modulation. Once triangle, sinusoidal and pulse waveforms are derived from its sawtooth core, each waveform is passed through a VCA. The outputs from these VCAs are then summed at the Mix output, which can be switched between 2- and 4-quadrant-multiplication modes. These two QM modes allow for a plethora of amplitude modulation effects to be achieved. Level controls for each waveform dictate both static level, but also depth of modulation through careful design of the control summation. Each individual waveform output is taken pre-VCA for maximum patching flexibility.

Shape modulation of the triangular, sinusoidal and pulse waveforms is also available. Both the triangular and sinusoidal waveshapes can be skewed forward or backward into ramp-like shapes, whilst shaping the pulse wave gives standard pulsewidth modulation.

Frequency modulation is available in both Linear and Exponential modes. The OSC1 also tracks to 1V/Octave over four octaves in its audible (HF) range, but can also be used as a low frequency oscillator in LF mode.

A Sync input allows for the OSC1 to be reset by an external signal. A rising edge will reset the sawtooth wave to its peak, from which it descends. The Inject input, meanwhile, allows for external signals to interfere with the sawtooth core. This allows for intermodulation-type effects to be produced, and opens new realms of chaotic oscillations.
Read more
 3 in stock $243.07
Click for better price!
quote 734840
Cat: 674888 Rel: 02 Aug 18
 
Eurorack module based around The Gristleizer
Notes: The Gristleizer Generator has been designed to replicate the original functionality of the Gristleizer's oscillator section, but with many new additions. With a brand new design from Roy Gwinn, the TG2 Generator is far more stable than its predecessor, featuring 1V/Oct tracking amongst other features. However, as with its original, the TG2 spans from low frequency ranges into the audible range, and makes for a killer bass oscillator as well as a fully featured LFO.

The core of the oscillator is based around a shape-variable ramp generator, with similar functionality to that found in the Korg MS Modulation Generators. Here, the Shape control takes the Ramp output from a descending sawtooth, through triangle, to an ascending sawtooth shape. This varying ramp waveform is then input to a wave-folder, which outputs both Fold and Pulse waveforms, based on how the Gain and Offset controls are set. Lastly, the original ramp waveform is fed into a comparator for the Clock output, the pulsewidth of which is variable using the Shape control.

The Gain and Offset of the TG2's wave-folder are both voltage controllable, as well as its Frequency via an attenuated control input and a 1V/Oct control input. The TG2 can also be reset by external sources via the Sync input.
Read more
 1 in stock $184.85
Cat: 674890 Rel: 02 Aug 18
 
Eurorack module based around The Gristleizer
Notes: The Gristleizer Filter presents one of the key components of the Gristleizer in a Eurorack module - its JFET-controlled multi-feedback band-pass filter. Its characteristics are not unlike a wah-wah pedal, whilst also being able to create other vocal tonalities, especially with several summed in parallel. Whilst originally controlled by the Gristleizer's oscillator, the TG3 can be controlled by any control source available in a Eurorack system.

As well as a couple of Frequency control inputs, the TG3 also adds Register and Resonance controls to the original filter circuit. The Register control shifts the resonant frequency of the filter core itself, whereas the Frequency control affects the gating of the filter's JFET. The Resonance control allows the circuit to self-oscillate easily, allowing for the TG3 to be used as a sound source as well as a filter. The TG3 also incorporates a Drive parameter (with final clipping circuitry added for taming the filter core) as well as an output Level control.
Read more
 2 in stock $150.13
Click for better price!
quote 674890
Cat: 674891 Rel: 02 Aug 18
 
Eurorack module based around The Gristleizer
Notes: The Gristleizer Modulator presents another key component of the Gristleizer in a Eurorack module - its JFET-controlled voltage-controlled amplifier. Whilst originally controlled by the Gristleizer's oscillator to achieve tremolo (or amplitude modulation) effects, the TG4 can be controlled by any control source available in a Eurorack system and, therefore, be used as a conventional VCA with some added features.

The Bias control sets the initial control point of the amplitude modulation, whilst a control voltage attenu-verter for CV2 allows for full control over how the amplitude is modulated. On top of this, the TG4 features a Dirt control, which allows the user to alter the behaviour of the JFET stage. At zero Dirt, the Modulator offers a super-clean VCA, whilst at maximum Dirt, waveforms become drastically mutated, at times beyond recognition. With the Dirt setting at 12 o'clock, the Modulator behaves exactly like the original VCA circuit of the Guitar Effects Pedal design. Also note that the JFET tends to exhibit second-harmonic distortion, similar to that of vacuum-tube amplifiers. Therefore, the TG4 presents not just a VCA, but also a module for adding distortion and character to audio signals.
Read more
 3 in stock $150.13
Click for better price!
quote 674891
111/11(ページ1/1)の商品

Filter

Future Sound Systems
Release Date
Featured
Close