Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

vinyl bestsellers
ホーム  Labels  

Erica Synths

Receive new release alerts for Erica Synths

Filter

Erica Synths
Options
150/91(ページ1/2)の商品
1  2  »
Erica Synths & Richie Hawtin Bullfrog Electric Organ Voicecard
Cat: 990268 Rel: 02 Jan 24
 
Voicecard designed to expand functionality of the Bulllfrog
Notes: You may wonder - what's that strange connector on the top of the Bullfrog? This is the VOICECARD slot. Voicecards expand functionality of the Bullfrog and make it even more versatile. Essentially, the voicecards replace patch cables - they connect the "modules" of the Bullfrog internally. But that's not all about them - some voicecards have built in mixers, signal generators and advanced electrical circuits to control the synthesiser, for example, sequencer that sends CV to control pitch and gate to start events on the synthesiser.

When inserting voicecards, make sure, the front panel of the voicecard faces the main interface of the Bullfrog. It is recommend that you turn off the Bullfrog when inserting a new voicecard.

The ELECTRIC ORGAN voicecard makes internal connections of the Bullfrog to emulate pipe organ, when several notes are played together. It also illustrates the principles of ADDITIVE SYNTHESIS. In additive synthesis several simpler waveforms are mixed together to generate more complex sounds. On this voicecard the pulsewave is sent to the DIVIDER and all outputs of the divider are mixed together with the original pulsewave and sent to the VCF and then to the VCA. Both ENVELOPE GENERATORS are involved in the same way as on the Acid Bassline voicecard. The DIVIDER divides an original frequency by even numbers and as result produces a pitch that is even octaves down form the original pitch. Faders on the voicecard determine an amplitude of each suboctave. Set the VCA OFFSET all way counter clockwise, PULSE OUT to the max. Push the MANUAL GATE button to check the sound. Tweak settings of the faders and observe the difference in the sound. Tweak CUTOFF and RESONANCE knobs. Add some echo by setting the DRY/WET knob to 12:00 and find the best DELAY TIME and FEEDBACK settings. Now, connect the keyboard and you are ready to perform Toccata and Fugue in D minor.
Read more
 2 in stock $22.09
Erica Synths & Richie Hawtin Bullfrog Highpass VCF Voicecard
Cat: 990266 Rel: 02 Jan 24
 
Voicecard designed to expand functionality of the Bulllfrog
Notes: You may wonder - what's that strange connector on the top of the Bullfrog? This is the VOICECARD slot. Voicecards expand functionality of the Bullfrog and make it even more versatile. Essentially, the voicecards replace patch cables - they connect the "modules" of the Bullfrog internally. But that's not all about them - some voicecards have built in mixers, signal generators and advanced electrical circuits to control the synthesiser, for example, sequencer that sends CV to control pitch and gate to start events on the synthesizer (Figure 40).

When inserting voicecards, make sure, the front panel of the voicecard faces the main interface of the Bullfrog. It is recommended that you turn off the Bullfrog when inserting a new voicecard.

As it's name suggests, the HIGHPASS VCF voicecard expands the sound treatment capabilities of the Bullfrog by bringing a highpass filter into the game. This allows for exploring highpass and bandpass filtering. The voice card features typical VCF controls - CUTOFF frequency, RESONANCE and CV LEVEL. The CV source switch allows for selecting between three CV sources - envelope generator 2, Sample & Hold LFO, which is a pulsewave generator in the Sample&Hold "module". The voice card features internal audio connections - the output from the MIXER is patched into the highpass VCF, the output of the highpass VCF goes into the input of the onboard lowpass VCF which is then connected to the VCA. For more flexibility, no CV connections for the Bullfrog are present on the voice card, so you have to do the patching yourself.
Read more
 2 in stock $27.35
Erica Synths & Richie Hawtin Bullfrog Noise Voicecard
Cat: 990270 Rel: 02 Jan 24
 
Voicecard designed to expand functionality of the Bulllfrog
Notes: You may wonder - what's that strange connector on the top of the Bullfrog? This is the VOICECARD slot. Voicecards expand functionality of the Bullfrog and make it even more versatile. Essentially, the voicecards replace patch cables - they connect the "modules" of the Bullfrog internally. But that's not all about them - some voicecards have built in mixers, signal generators and advanced electrical circuits to control the synthesiser, for example, sequencer that sends CV to control pitch and gate to start events on the synthesizer (Figure 40).

When inserting voicecards, make sure, the front panel of the voicecard faces the main interface of the Bullfrog. It is recommended that you turn off the Bullfrog when inserting a new voicecard.

The WIND AND STARS voicecard makes internal connections of the Bullfrog so that it automatically emulates randomly evolving wind sound and blinking stars are controlled by the divider. Toddlers fall asleep better when they hear sounds like these.

The NOISE is patched into VCF and the VCF is patched to VCA. Set the VCA OFFSET to 12:00, ENVELOPE GENERATOR 1 to LOOP mode, NOISE LVL all way clockwise. Then manipulate SAMPLE & HOLD RATE setting, VCF CUTOFF, RESONANCE and CV 1 LVL settings, and well as ATTACK 1 and RELEASE 1 settings. Add some echo by setting the DRY/WET knob to 12:00 and find the best DELAY TIME and FEEDBACK settings.

Enjoy and goodnight!
Read more
 2 in stock $26.04
Erica Synths & Richie Hawtin Bullfrog Semi-Modular Analogue Desktop Synthesiser
Cat: 963370 Rel: 08 Nov 23
 
Semi-modular analogue desktop synthesiser
Notes: A collaborative effort between the techno icon and one of the best synth brands around, the Bullfrog is designed to encourage newcomers to analogue synths while secretly packing killer sound and some innovative features.

Supplier's Notes:
Introducing Erica Synths X Richie Hawtin Bullfrog

Learn. Produce. Perform

Created by Erica Synths & Richie Hawtin, Bullfrog is an educational electronic music instrument designed to captivate and inspire both youth and professionals alike. Bullfrog invites you to unlock musicality while combining the thrill of electronic music production with a comprehensive learning experience.
Bullfrog is a classical subtractive synthesiser - it consists of several "modules" for sound generation - VCO, NOISE GENERATOR - and treatment - VCF, VCA/DELAY, as well as "modules" that generate control and modulation signals to control them - ENVELOPE GENERATORS and SAMPLE & HOLD. The Bullfrog will not make the sound on its own unless it is patched - using eurorack patch cables to interconnect the "modules" or by inserting voice cards that create internal connections between the "modules" in a specific way and add extra functionality, like sampler/looper, sequencer, groovebox, etc. This approach better helps to understand functionality of a subtractive synthesizer and the principles of sound design with instruments like these.

In order to provide a well rounded understanding of the functionality of this synthesizer and sound synthesis in general, a comprehensive user manual is created to accompany the learning process.

Electronic music with its rich traditions and innate sense of exploration at core is ever popular, with artists and fans stretching around the globe. For me, one of the most exciting parts of creating electronic music is the playful exploration that leads one deep into their own imagination. Whether the intention to create completely imagined or real-life inspired sounds, the route one takes to create is always personal and often surprising. It is within these experiments where the beauty of synthesis really comes alive and which often unlocks a new sense of creativity and purpose.

Whether someone's experience with Bullfrog points them down a career in electronic music or not, the goal is to both nurture the love for electronically produced sounds and promote the accessibility of learning and understanding the basics of sound synthesis.

Erica Synths believe that the hands-on approach and problem solving that is innate to synthesis on a semi-modular synth like the Bullfrog, contains life lessons that go beyond what we can hear.

Bullfrog encapsulates the foundations of synthesis and is built with an immediate, intuitive design and a unique expandable architecture that grows and expands together with the user's imagination. This instrument feels at home anywhere - as an educational tool in music and physics classes, as an addition to your basement studio or even as a tool for performance on a stage.

What's included:

BULLFROG synthesizer
Universal 12VDC wall wart adapter
User manual
10 patch notes stencils
10 patch cables
3 pre-patched voice cards
3 DIY voice cards with adjustable offset
Delay effect with adjustable delay time and feedback amount
Two looping attack-sustain-release envelope generators (EG)
Sample & Hold circuit with an individual clock
Manual gate button
Voicecard slot
Built in speaker
DIN5 MIDI input
USB connector

What's included

BULLFROG synthesizer
Universal 12VDC wall wart adapter
User manual
10 patch notes stencils
10 patch cables
3 pre-patched voice cards
3 DIY voice cards
Read more
MRP:$535.38 SAVE 12%
 2 in stock $471.22
Erica Synths 1x42HP Pico Modular Synthesiser Enclosure Case
Cat: 686700 Rel: 27 Apr 18
 
1x42HP Pico modular synthesiser enclosure case
Notes: Small desktop enclosure for Eurorack modules with 42 HP space and a maximum depth of 32mm. A relatively strong power solution with an external power supply and an on/off switch located at the case is included.

The power supply provides:

- 850 mA at +12V
- 850mA at -12V
- 500mA at +5V

The power distribution has 14 connectors and the case can house exactly fourteen modules from Erica's Pico Series.
Read more
 1 in stock $160.92
Click for better price!
or call +44 20 7424 1960
quote 686700
Erica Synths 20cm Braided Patch Cables (black, pack of 5)
Cat: 838033 Rel: 21 Jul 21
 
Braided patch cables: black, 20cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
MRP:$10.52 SAVE 10%
 1 in stock $9.45
Erica Synths 20cm Braided Patch Cables (red, pack of 5)
Cat: 838034 Rel: 21 Jul 21
 
Braided patch cables: red, 20cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
MRP:$10.52 SAVE 10%
 2 in stock $9.45
Erica Synths 20cm Braided Patch Cables (white, pack of 5)
Cat: 838036 Rel: 21 Jul 21
 
Braided patch cables: white, 20cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 1 in stock $12.09
Erica Synths 2x104HP Synth Module Case Backpack
Cat: 920669 Rel: 24 Jan 23
 
An accessory for 2x104HP travel cases.
Notes: A new and improved design with additional space and comfort for longer journeys!

This backpack is a must-have accessory for our 2x104HP aluminum and carbon travel cases.

Featuring a roomy main compartment with an elastic band for securing a laptop in place, spacious side pockets, and a separate zipped compartment on the back, there's plenty of room for all your patch cables and other accessories.

Dimensions: 58 x 18 x 32 cm
Read more
 1 in stock $132.27
Click for better price!
or call +44 20 7424 1960
quote 920669
Erica Synths 30cm Braided Patch Cables (black, pack of 5)
Cat: 838029 Rel: 21 Jul 21
 
Braided patch cables: black, 30cm, pack of 5
 2 in stock $11.04
Erica Synths 30cm Braided Patch Cables (red, pack of 5)
Cat: 838030 Rel: 21 Jul 21
 
Braided patch cables: red, 30cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 1 in stock $13.67
Erica Synths 30cm Braided Patch Cables (white, pack of 5)
Cat: 838032 Rel: 21 Jul 21
 
Braided patch cables: white, 30cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 2 in stock $10.51
Erica Synths 60cm Braided Patch Cables (black, pack of 5)
Cat: 838025 Rel: 21 Jul 21
 
Braided patch cables: black, 60cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 2 in stock $14.20
Erica Synths 60cm Braided Patch Cables (red, pack of 5)
Cat: 838028 Rel: 21 Jul 21
 
Braided patch cables: red, 60cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 1 in stock $12.09
Erica Synths 60cm Braided Patch Cables (white, pack of 5)
Cat: 838027 Rel: 21 Jul 21
 
Braided patch cables: white, 60cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 1 in stock $14.20
Erica Synths 8-MIDI Thru Box
Cat: 686702 Rel: 27 Apr 18
 
Compact MIDI box featuring 8 MIDI through splitters
Notes: Erica Synths MIDI thru box is professional quality, no latency, one MIDI In to 8 MIDI Through splitter in rigid aluminium case. It allows to connect up to 8 instruments to your sequencer or master keyboard and control them simultaneously without undesired delays and interference.
Read more
 1 in stock $118.33
Click for better price!
or call +44 20 7424 1960
quote 686702
Erica Synths 90cm Braided Patch Cables (black, pack of 5)
Cat: 838020 Rel: 21 Jul 21
 
Braided patch cables: black, 90cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 1 in stock $15.51
Erica Synths 90cm Braided Patch Cables (red, pack of 5)
Cat: 838023 Rel: 21 Jul 21
 
Braided patch cables: red, 90cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 1 in stock $16.31
Erica Synths 90cm Braided Patch Cables (white, pack of 5)
Cat: 838024 Rel: 21 Jul 21
 
Braided patch cables: white, 90cm, pack of 5
Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.
Read more
 1 in stock $13.15
Erica Synths Acidbox III Filter Effects Unit
Cat: 690926 Rel: 14 Jun 18
 
Filter effects unit
Notes: Erica Synths Acidbox III brings you the core of the famous Polivoks VCF in stereo version with a unique audio signal overdrive circuit, built in LFO and envelope follower in a compact, full aluminium case.

The Acidbox III has adjustable input gain, therefore it works with various sound sources - guitars, units with line level signals (synthesizers, grooveboxes, etc.) and modular synths. Configurable control input allows you to connect a bypass footswitch, expression pedal, external cut-off control voltage source and LFO synchronization trigger. This makes the Acidbox an ideal companion in almost every production or live performance setup.
Read more
 1 in stock $418.62
Click for better price!
or call +44 20 7424 1960
quote 690926
Erica Synths Bassline Analogue Synth Voice Module With Acid Basslines
Cat: 690948 Rel: 19 Sep 18
 
Synth voice module - 14HP
Notes: Erica Synths Bassline is fully analogue synth voice module for ultimate basslines and leads.

It features AS3340 VCO with three waveforms, a filter inspired by Erica Synths Acidbox and unique features - transistor based suboscillator and two BBD lines that emulate VCO detune creating a sound of massive polysynth from one oscillator.

Accent provides more expression to the bassline, by adding volume and opening the VCF slightly.
Read more
 1 in stock $298.71
Click for better price!
or call +44 20 7424 1960
quote 690948
Erica Synths Black BBD Dual Tap Analogue Delay Module
Cat: 823048 Rel: 28 Apr 21
 
Dual tap analogue delay module - 12HP
Notes: Premium analogue delay from Erica's flagship Black Series range. Two bucket brigade device delay lines work simultaneously with smooth crossfading and tons of voltage control. Lovely.

Supplier's Notes:
Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest quality components are used, all inputs and outputs are protected against undesired overvoltage. When designing Black Series, put design and usability superior. Big knobs are assigned to functions that make difference in sound. Erica Black series consist of range of modules that are needed to put together entire synth. Enjoy!

The Erica Synths Black BBD is one of kind analogue delay module. It features two BBD lines: short, 1024 stage and long, 4096 stage, that work simultaneously and you can smoothly fade between those two, thus creating distinct multitap effect.

Furthermore, an advanced BBD clock noise cancellation circuit is implemented that reduces unwanted BBD noise without filtering higher frequencies of audio signal. Most of parameters are voltage controlled, which allows to integrate the module in complex modular setups.

Time

This is delay time manual control.

Because of BBD clock suspension circuit, delay time can be pushed in extremely long regions, however in that case BBD clock noise may appear. The Time CV is added to the knob setting.

In level

This is the input attenuator switch. Select among full amplitude, half amplitude and audio off.

BBD mode

This control smoothly fades between short and long delays. Any setting in-between will result in distinct multitap delay effect.

LFO rate

Adjust the internal modulation LFO rate. The internal LFO controls delay time, and it's automatically disengaged, when an external modulation signal is connected. The LED gives visual feedback on the LFO rate.

LFO shape

Select the LFO shape. Three shapes are available - triangle, square and in-between shape - mix of triangle and square.

Input

This is the audio input of the module. This is manual Dry/Wet mix. The MIX CV is added to the knob setting.

Colour

Even though the module has BBD clock suspension circuit, the colour switch provides extra lowpass filtering of the signal. At top setting no filtering is applied, at lower settings increasing filtering is present.

Feedback

This is the delay feedback manual control. In extreme clockwise settings the module goes into self-oscillation, and by adjusting delay time and BBD mode settings, the module becomes a drone machine. The FBK CV is added to the knob setting.

CV level

This is the Time CV level attenuator. If nothing is patched into TIME CV socket, it controls the internal LFO amplitude.

WET out

This is the WET signal output of the module - use it for advanced patches.

Out

This is the main output of the module.

Time CV; FBK CV; Mix CV;
These are CV inputs for Time, Feedback and Dry/Wet mix.

SPECS:
Audio level 10Vptp
CV level (full span) -5V - +5V
Power consumption +95mA, -81mA
Module width 12HP
Module depth 35mm
Read more
MRP:$278.74 SAVE 29%
 1 in stock $198.78
Click for better price!
or call +44 20 7424 1960
quote 823048
Erica Synths Black DADSR EG Re-Triggerable Exponential DADSR Envelope Generator Module
Cat: 944211 Rel: 15 May 23
 
Analogue envelope generator module - 10HP
Notes: The Erica Synths Black DADSR (Delay-Attack-Decay-Sustain-Release) is a fully analogue envelope generator that gives you extended control over events in your modular synth. It's a looping exponential envelope generator that has voltage control over each stage of the envelope. An independent Gate Delay section adds extra functionality to design advanced soundscapes, like delayed modulation e ects, wave morphing, etc.

SPECS:
Attack time (with max CV) 0...2,5" (4,4")
Decay time (with max CV) 0...5" (12")
Sustain level 0...10V
Release time (with max CV) 0...4,5" (10")
Gate delay time 0,7"
CV level (full sweep) -5V - +5V
Panel width 10HP
Module depth 30mm
Power consumption 42mA@+12V, 58mA@-12V


ATTACK
Set the attack time of the envelope

GATE
Patch the gate signal here to start the envelope. If nothing is patched here, the gate input is normalled to the gate

DELAY OUT
CV ATTENUATORS
These are CV attenuators for attack, sustain and release stages

SUSTAIN
Set the sustain level of the envelope

GATE DEL
Set the gate delay time

TRIGG
You can retrigger the envelope at any stage by applying trigger signal here. The trigger alone initiates an AD envelope instead of ADSR

DELAY OUT
This is the gate delay output. The gate delay section can be used independently to control other modules in your modular setup

D GATE
If you wish to use gate delay functionality, patch the gate signal here

BP OUT
This is the bipolar output - the CV here is centered against 0V and this output serves as an LFO

EG OUT
This is the envelope generator output

M. GATE
This is the manual gate button. A built in LED gives a visual reference of the output voltage

RELEASE
Set the release time of the envelope

DECAY
Set the decay time of the envelope

LOOP
This is a LOOP switch. When it's ON, the envelope generator outputs a signal for which the rise time is defined by the Attack setting and the fall time is defined by the Release knob setting.
Read more
 1 in stock $168.29
Click for better price!
or call +44 20 7424 1960
quote 944211
Erica Synths Black DJ VCF Low Pass & High Pass Module
Cat: 946500 Rel: 29 Jun 23
 
Low pass & high pass filter module - 10HP
Notes: Take a DJ-mixer-style combined high-pass and low-pass filter, cram it into Eurorack and you have the DJ VCF. A simple formula, but one perfected by Erica's attention to detail, with CV control and adjustable resonance.

Supplier's Notes:
As its name suggests, the Erica Synths Black DJ VCF provides sound treatment functionality typically found on DJ decks - it is fully open when the cutoff knob is set to 12:00. When turned counter-clockwise, lowpass filtering is applied and when turned clockwise, highpass filtering is applied. The filter also has a nice-sounding resonance parameter. This module provides hands-on control over the sound during the performance, as well as unconventional timbre modulations that are hard to achieve with conventional state variable filters. The Black DJ VCF is a fully analogue design and consists of two VCFs - highpass and lowpass in series and the filter management is done by complex CV routing.

CUTOFF
This is the main control of the module - manual cutoff frequency adjustment with a twist - it's fully open when the cutoff knob is set to 12:00. When turned counter-clockwise, lowpass filtering is applied and when turned clockwise, highpass filtering is initiated

AUDIO LVL
Adjust the audio signal level

RESONANCE
Adjust the resonance level manually. On settings over 1PM, the filter will start to self-oscillate. The resonance is incoming audio signal-sensitive - a signal of greater amplitude may reduce the impact of resonance on the resulting sound

CV1 LVL
This is the cuto CV attenuverter. Adjust the CV level to your taste! Notice that the cutoff CV works differently compared to conventional state variable filters - it sweeps the filter from closed lowpass through fully open to closed highpass

CV2 LVL
This is another cuto CV attenuator

CV2 IN
This is the cuto CV2 input, which is controlled by the attenuator knob

AUDIO IN
Patch your audio signal here.

OUTPUT
This is the audio output of the module.

CV1 IN
This is the cutoff CV1 input. The CV1 level is adjustable by the CV1 LEVEL attenuverter knob.

Features
Fully analogue DJ-style VCF
Manual resonance control
Cuto ff CV attenuverter and attenuator
Input and output
Protection against undesired overvoltage

Technical specifications:

Audio level: 10Vptp
CV level : -10V - +10V
Filter slope: 24dB/oct
Power consumption: +55mA, -58mA
Module width: 10HP
Module depth: 35mm
Read more
MRP:$184.07 SAVE 19%
 2 in stock $149.15
Erica Synths Black DJ VCF Low Pass & High Pass Module (B-STOCK)
Cat: 966244 Rel: 01 Jan 90
 
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Take a DJ-mixer-style combined high-pass and low-pass filter, cram it into Eurorack and you have the DJ VCF. A simple formula, but one perfected by Erica's attention to detail, with CV control and adjustable resonance.

Supplier's Notes:
As its name suggests, the Erica Synths Black DJ VCF provides sound treatment functionality typically found on DJ decks - it is fully open when the cutoff knob is set to 12:00. When turned counter-clockwise, lowpass filtering is applied and when turned clockwise, highpass filtering is applied. The filter also has a nice-sounding resonance parameter. This module provides hands-on control over the sound during the performance, as well as unconventional timbre modulations that are hard to achieve with conventional state variable filters. The Black DJ VCF is a fully analogue design and consists of two VCFs - highpass and lowpass in series and the filter management is done by complex CV routing.

CUTOFF
This is the main control of the module - manual cutoff frequency adjustment with a twist - it's fully open when the cutoff knob is set to 12:00. When turned counter-clockwise, lowpass filtering is applied and when turned clockwise, highpass filtering is initiated

AUDIO LVL
Adjust the audio signal level

RESONANCE
Adjust the resonance level manually. On settings over 1PM, the filter will start to self-oscillate. The resonance is incoming audio signal-sensitive - a signal of greater amplitude may reduce the impact of resonance on the resulting sound

CV1 LVL
This is the cuto CV attenuverter. Adjust the CV level to your taste! Notice that the cutoff CV works differently compared to conventional state variable filters - it sweeps the filter from closed lowpass through fully open to closed highpass

CV2 LVL
This is another cuto CV attenuator

CV2 IN
This is the cuto CV2 input, which is controlled by the attenuator knob

AUDIO IN
Patch your audio signal here.

OUTPUT
This is the audio output of the module.

CV1 IN
This is the cutoff CV1 input. The CV1 level is adjustable by the CV1 LEVEL attenuverter knob.

Features
Fully analogue DJ-style VCF
Manual resonance control
Cuto ff CV attenuverter and attenuator
Input and output
Protection against undesired overvoltage

Technical specifications:

Audio level: 10Vptp
CV level : -10V - +10V
Filter slope: 24dB/oct
Power consumption: +55mA, -58mA
Module width: 10HP
Module depth: 35mm
Read more
 1 in stock $143.05
Erica Synths Black Dual VCF Dual Multimode Filter Module
Cat: 780436 Rel: 23 Jun 20
 
Dual multimode VCF module - 18HP
Notes: Erica Synths Black Dual VCF is a dual multimode filter with CV control over cutoff and resonance for serious modular patches.

At the core of this VCF is a highly stable, custom multimode VCF chip AS3320 (produced in Riga, btw). This module can be used as two independent VCFs with simultaneous HP, BP and LP outputs, controls can be linked to stereo application and both VCFs can be chained in series or parallel to the summing output for ultimate modulations. Bonus feature - the 16 band spectrum analyser gives you visual feedback on what happens on summing output.

Technical specifications:

Audio output amplitude: 10 Vptp
CV input (full sweep): 10 Vptp
Panel width: 18HP
Module depth: 35mm
Power consumption: 40mA@+12V, 36mA@-12V

Read more
MRP:$268.22 SAVE 28%
 1 in stock $191.96
Click for better price!
or call +44 20 7424 1960
quote 780436
Erica Synths Black EG2 Exponential ADSR Envelope Generator Module
Cat: 944209 Rel: 15 May 23
 
Re-triggerable, looping envelope generator module - 8HP.
Notes: The Erica Synths Envelope Generator 2 is a re-triggerable, looping envelope generator with some unconventional features that are very useful for experimental setups. What sets the Black EG2 apart from other envelope generators is its optional GATE LENGTH setting, which allows for generating full ADSR envelopes even if a short trigger is used at the input. Likewise, in LOOP mode, the module outputs a full ADSR envelope instead of a classical AD envelope. The gate length is both manual and CV controlled, which allows for using this envelope generator in compact modular setups controlled by trigger sequencers only.

SPECS:

Gate input level 3...10V
Envelope amplitude 0...10V
Attack time 0...7,4"
Decay time 0...19"
Sustain level 0...10V
Release time 0...17"
Gate length 0...3,7"
Panel width 8HP
Module depth 25mm
Power consumption 29mA@+12V, 33mA@-12V

LOOP/SINGLE

Select between SINGLE SHOT or LOOP modes. When the internal gate is o , the rise and fall times are set via the A and R knobs. When the internal gate is on, all knobs have an e ect on the envelope shape.

The LED gives visual feedback on the envelope state.
GATE ON
Engage the internal gate and you have a full ADSR envelope in loop mode and with a trigger applied to the trigger input in single mode.

G. LENGTH

Set the internal gate length manually

LENGTH CV

This is the internal gate length CV input.

The CV is added to the gate length potentiometer setting

GATE

This is the GATE input

A / D / S / R

These knobs adjust envelope stage times and sustain level

TRIGGER

This is the TRIGGER input. You can retrigger the envelope and start the attack stage again, even if the gate is still high (see Figure 1).

If you wish to use the envelope generator with an internal gate, patch the incoming trigger signal here. The internal gate is linked to the trigger input, not the gate input.

EG OUT

This is the envelope generator output.
Read more
 1 in stock $152.51
Erica Synths Black Hole DSP v2 Stereo Effects Processor Module
Erica Synths Black Hole DSP v2 Stereo Effects Processor Module (CV modulation/delay/digital/distortion/dual/stereo/effect/pitch shifter/reverb module)
Cat: 690950 Rel: 25 Oct 18
 
Stereo effects processor module - 16HP
Notes: Erica Synths Black Hole DSP 2, an updated version of Black Hole DSP features 24 custom effects, designed in close co-operation of Erica Synths team rider KODEK and creator of SpinCAD software Gary Worsham. Each effect has 3 manually and CV controllable parameters, manual and CV control over sampling frequency for spanning from 48kHz to really Lo-Fi crunchy sound and full analogue dry/wet control. All effect parameter settings can be saved to the memory and instantly recalled with the effect, which makes Black Hole DSP II ideal for live performances.
Read more
 1 in stock $271.36
Click for better price!
or call +44 20 7424 1960
quote 690950
Erica Synths Black Joystick2 4-Channel Recordable Joystick Controller Module
Cat: 812600 Rel: 23 Feb 21
 
8-channel multi-functional CV source, joystick, movement recorder & distinct LFO module - 12HP
Notes: Multi-function eight-channel LFO, joystick, movement recorder and drone oscillator that packs in lots more functionality than you might expect. A real modulation powerhouse in a compact format.

Supplier's Notes:
Erica Synths Black Joystick2 is 8 channel multi functional CV and sound source - joystick, movement recorder, distinct LFO and drone/noise oscillator. It provides great interaction with the modular system and allows to develop unconventional modulation patterns instantly.
Read more
 1 in stock $218.78
Click for better price!
or call +44 20 7424 1960
quote 812600
Erica Synths Black LPG Low Pass Gate Module
Erica Synths Black LPG Low Pass Gate Module (envelope generator/filter/low pass gate/VCA module)
Cat: 807310 Rel: 22 Jan 21
 
Low pass gate module with decay envelope - 10HP
Notes: Erica Synths Black LPG is our take on Lowpass Gate idea - it's designed from scratch
module featuring 2nd order lowpass VCF (the original Buchla lowpass gate was 1st order
VCF) and VCA combo with distinct resonance circuit on top. Voltage control over VCF cuto
frequency/VCA oset and mode (VCF/VCF+VCA/VCA), as well as built in decay envelope
generator makes it a versatile module for sound shaping in any modular setup.

FEATURES:
Three vactors for 2nd order VCF
VCF/VCF+VCA/VCA modes
Manual and voltage controlled cuto/oset
Manually and voltage controlled mode selection
Manually resonance depth control
Resonance overdrive switch
Built in decay envelope generator
Manually and voltage controlled decay time
Envelope CV output
Ski-friendly design

SPECS:
Audio output amplitude 10Vptp
CV range (full span) -5V - +5V
Max Decay time 4''
Panel width 10HP
Module depth 35mm
Power consumption 44mA@+12V, 45mA@-12V
Read more
 1 in stock $171.44
Erica Synths Black Mixer/Splitter v2 Audio/CV Mixer & Multiple Module
Cat: 826616 Rel: 17 Jun 21
 
Input mixer/output signal splitter module - 4HP
Notes: Introducing a four independently buffered input mixer and a buffered output signal splitter, in one module!

Erica Synths Black Mixer/Splitter V2 is an advanced replacement for stackable patchcables.

Everyone who knows a bit more about electronics will point out that stackable patchcables are not a really wise choice for such sensitive things as musical instruments because they mechanically connect electrical signals that at best can cause undesired modulations or even damage the modules.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, design and usability were prioritised first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

Technical specifications:

Input signal level: -10V - +10V
Power consumption: +25mA, -25mA
Module width: 4HP
Module depth: 25mm
Read more
 1 in stock $68.36
Click for better price!
or call +44 20 7424 1960
quote 826616
Erica Synths Black Mute Mixer Audio Mixer Module With Mutes
Cat: 826611 Rel: 05 May 21
 
Audio mixer module with mutes - 6HP
Notes: Erica Synths Black Mixer is compact, high quality audio mixer with bonus features - mute switch on each input and three buffered outputs. This allows you to add audio signals to your mix instantly and in exactly right level, plus you can send signals to several post-mixer devices simultaneously, for example, split the output signal to LP and HP VCFs and create advanced bandpass and notch filters.

Technical specifications:
Max input level: -10V - +10V
Mixer gain: 1
Power consumption : +8mA, -8mA
Module width: 6HP
Module depth: 25mm
Read more
MRP:$104.13 SAVE 27%
 1 in stock $75.72
Click for better price!
or call +44 20 7424 1960
quote 826611
Erica Synths Black Octasource Low Frequency Oscillator Module
Cat: 821319 Rel: 08 Apr 21
 
LFO module with 8 simultaneous outputs - 12HP
Notes: Erica Black OCTASOURCE is, what we want to believe, the LFO carried to it's extremes. It features one of 8 waveforms available on 8 outputs phase shifted by 45 degrees OR all 8 waveforms simultaneously on all outputs. Futuremore, waveform selection, phase shift and LFO rate are CV controlled, and the rate can be synched to an external clock signal.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, design and usability was prioritsed over module width. Big knobs are assigned to functions that make difference in sound. The Erica Black series are a range of modules that together make an entire synthesizer.

LFO rate: 0.03Hz- 30HZ
Output signal amplitude: 10Vptp
CV input (full sweep): -5V- +5V
Power consumption: +82mA, -44mA
Module width: 12HP

82 mA +12V
44 mA -12V
25 mm deep
Read more
Tags: LFO module
 1 in stock $276.62
Click for better price!
or call +44 20 7424 1960
quote 821319
Erica Synths Black Output v2 Output Mixer & Stereo Panner Module
Erica Synths Black Output v2 Output Mixer & Stereo Panner Module (dual & stetreo/mixer/panning/utility/external module)
Cat: 717577 Rel: 31 Jan 19
 
Stereo mixer module with 3 mono channel strips with level potentiometers - 14HP
Notes: Erica Synths Black Output is a high-quality output mixer and a stereo panner with balanced outputs and headphone amplifier for monitoring your modular masterpieces.

All inputs are buffered, we use stereo potentiometers (similar to those used in high quality studio mixers) for panning, IN4 is a stereo input with simultaneous level adjustment for both channels, IN3 has a CV controlled auto-pan function. There is also a 6.3mm jack for the balanced outputs and headphones.
Read more
 1 in stock $273.47
Click for better price!
or call +44 20 7424 1960
quote 717577
Erica Synths Black Quad VCA2 4-Channel Voltage Controlled Amplifier & Mixer Module
Cat: 791783 Rel: 09 Oct 20
 
4-channel voltage controlled amplifier & mixer module - 10HP
Notes: Erica Synths Black Quad VCA2 is a versatile four channel voltage controlled amplifier and mixer module for use in complex modular systems. Each channel has linear/logarithmic response selector and signal level indicator LED. All outputs are sequentially mixed and CV inputs are normalled to each other, so you can use the module in various configurations. If no CV is applied, the Black Quad VCA2 performs as a signal mixer, and the 4th channel is DC coupled for controlling CV sources, as well.
Read more
 1 in stock $208.25
Click for better price!
or call +44 20 7424 1960
quote 791783
Erica Synths Black Sequencer 4-Channel & 64-Step Sequencer Module
Erica Synths Black Sequencer 4-Channel & 64-Step Sequencer Module (clock generator/clock modulator/CV modulation/MIDI/sequencer module)
Cat: 732854 Rel: 16 Dec 20
 
4-channel & 64-step sequencer module - 42HP
Notes: Immense power in this multi-featured sequencer from one of our favourite brands. Four channels of 64-step sequences with advanced options including probability, quantising and randomisation.

Supplier's Notes:
The Erica Synths Black Sequencer takes classical modular sequencing to the next level by adding tons of features required for contemporary modular synthesizers.

The Black Sequencer features 4 channels with CV, gate and modulation outputs, up to 64 step sequences that can be chained into songs, independent track time divisions, multiplications and lengths. It includes a built-in quantizer, LFOs, envelope generators, parameter randomization, a MIDI in/out and many other features essential for composing and performing electronic and experimental music. Even though it provides many programmable parameters per step, it's intuitive, easy and straightforward to use, and could well become a master controller for many modular setups.

Black Sequencer firmware 1.04 is now available!

It adds output quantiser which can quantise track outputs in real time or rewrite notes in the sequence. Update also adds new track and synced LFO time divisions.

Technical specifications:

Power consumption: +145mA, -25mA
Module width: 42HP
Module depth: 25mm
Read more
MRP:$545.90 SAVE 12%
 3 in stock $481.73
Erica Synths Black Stereo Mixer V3 4-Input Stereo Mixer Module
Cat: 716534 Rel: 24 Jan 19
 
4-input stereo wixer module - 10HP
Notes: Black Stereo Mixer is just what you need, if your setup has several nowadays gaining popularity modules with stereo inputs or outputs, like Black Hole DSP, Erica Fusion Delay, MI Clouds or some other. In order to save rack space, we designed compact mixer with lot of cool, performance oriented features.

In order to save rack space, we designed a compact mixer with a lot of cool, performance oriented features.

Check out also the Black Pre-fade Listen Expander that is a satellite module to Erica Synths Black Stereo Mixer!

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.
Read more
 1 in stock $137.78
Click for better price!
or call +44 20 7424 1960
quote 716534
Erica Synths Black Stereo Reverb Hi-Fi Stereo FX Module
Cat: 946497 Rel: 17 Oct 23
 
Hi-Fi stereo effects module - 12HP
Notes: The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of unique features based on Erica Synths' custom DSP engine. The reverb sources are selectable Tape, BBD and "dirty BBD" digital; emulations with three modes, each - Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone and stereo spin controls allow for designing extremely delicate reverberation effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features:

Reverb based on Tape, BBD and digital delay lines
Three room sizes
Manual and triggered FREEZE with 1V/oct tracking
10 preset patches
CV control over size, feedback, tone, dry/wet mix and preset selection
Adjustable stereo spin

Specs:

Max audio input level before clipping 16Vptp
CV input range (full span) -5V - +5V
Sampling frequency 48kHz, 24bit
Audio codecs -108 dynamic range, -98dB THD+N
Power consumption 120mA@+12V, 39mA@-12V
Module width 12HP
Module depth 35mm
Read more
 1 in stock $292.40
Click for better price!
or call +44 20 7424 1960
quote 946497
Erica Synths Black VC Clock v2 Clock Generator Module
Cat: 821420 Rel: 08 Apr 21
 
Clock generator module - 10HP
Notes: Erica Synths Black VC Clock is the beating heart of your modular system.

The beating heart of your modular system in 10HP.

This module generates several clock signals simultaneously and has some more advanced features like tap tempo, shuffle and divide, both for controlled rhythmic music production and for experiments with high level of uncertainty. You may also find the adjustable and even random duty circle of shuffling and random clock outputs interesting. Bonus feature - the module can be used as a performance time stopwatch.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, design and usability was prioritised over module width. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

Technical specifications:

Max input level: -10V - +10V
Clock signal level: 0 - +5V
Clock rate: 30 - 400BPM
CV input level (full sweep): -5V - +5V
Power consumption: 40mA@+12V, 5mA@-12V
Module width: 10HP
Module depth: 25mm
Read more
MRP:$219.83 SAVE 28%
 1 in stock $158.31
Click for better price!
or call +44 20 7424 1960
quote 821420
Erica Synths Black VC EG EXP CV/Gate Output Expander Module For Black VCEG
Cat: 780450 Rel: 23 Jun 20
 
CV & gate output expander module for Black VCEG - 5HP
Notes: Erica Syths Black VC EG Expander takes the Black VC EG to the next level - it outputs gates or CVs for each active stage of the envelope so you can design some really advanced patches. Inverted and bipolar envelope outputs are also available.

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

NB: This expander module can be connected only to the Black VC EG. It will not work as a standalone eurorack module.
Read more
MRP:$104.13 SAVE 32%
 1 in stock $70.47
Click for better price!
or call +44 20 7424 1960
quote 780450
Erica Synths Black VCO Expander Waveform Mixer & Sub-Oscillator Module For Balck VCO
Cat: 826592 Rel: 03 Aug 21
 
Expander waveform mixer & sub-oscillator module for Black VCO - 10HP
Notes: Erica Synths Black VCO Expander essentially is an advanced waveform mixer plus two octaves down suboscillator, it allows you to explore wave design in brand new areas.

Features
Waveform mixer/inverter
Sine/Triangle/Tits waveform switch
Transistor-based -2 octave suboscillator
-1 and -2 octave suboscillator crossfade
Suboscillator lowpass filter
Diode limiter on output signal amplitude
Three simultaneous outputs

Erica Black series are high-end modules with unique functionality. Only the highest quality components are used and all inputs and outputs are protected against undesired overvoltage. When designing the Black Series, we did not economise on the module width, we put design and usability first. Big knobs are assigned to functions that make difference in sound. Together the Erica Black series are a range of modules that make an entire synthesizer.

NB! This expander module can be connected only to Black VCO and Black VCO2. It will not work as a standalone eurorack module.

Dimensions
10 HP
25 mm deep

Current Draw
5 mA +12V
5 mA -12V
Read more
MRP:$120.96 SAVE 29%
 1 in stock $86.25
Click for better price!
or call +44 20 7424 1960
quote 826592
Erica Synths Black VCO2 Analogue Voltage Controlled Oscillator Module
Cat: 799541 Rel: 23 Nov 20
 
Analogue VCO module with built in SAW waveshaper & two modulation LFOs - 12HP
Notes: Erica Synths Black VCO2 is an analogue VCO with built in SAW waveshaper and two modulation LFOs.

Features
Simultaneous sine, triangle, saw and pulse wave outputs
-1 octave suboscillator
Highly accurate and stable tracking across 8 octaves
Saw waveshaper with manual and CV control
Manually adjustable and CV controlled pulse width
Exponential/Linear FM input with an attenuator
2 built-in modulation LFOs
Synchronization input
Octave switch - 7 octaves
Skiff-friendly design
Erica Synths Black VCO2 is all analogue, highly accurate and stable VCO with four simultaneous waveform outputs, one octave down suboscillator and some unique features. Unlike harsh, logic divider based sub-oscillators, Black VCO2 transistor-based suboscillator generates distinct, rounded squarewave. Furthermore, the Black VCO2 has built in SAW waveshaper and two modulation LFOs. Together with Black VCO Expander - waveform mixer you get massive analogue sound source with plenty of patch points for modular use.

Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest quality components are used, all inputs and outputs are protected against undesired over-voltage. Erica Black Series consist of range of modules that are needed to put together entire synth.

Technical specifications:
Audio output amplitude: 10Vptp
Octave range: C0 - C8
Panel width: 12HP
Module depth: 35mm
Power consumption: 71mA@+12V, 62mA@-12V
Power consumption w. Expander: 102mA@+12V, 87mA@-12V
Read more
 1 in stock $244.02
Click for better price!
or call +44 20 7424 1960
quote 799541
Erica Synths Clap Analogue Clap Drum Module
Cat: 690940 Rel: 25 Oct 18
 
Analogue drum clap module - 10HP
Notes: Erica Synths Clap is developed together with French company e-licktronic and it's our take on analogue clap circuits adapted for modular systems. Sharp, punchy sound, Accent & CV control over Tone make it distinctively expressive in studio and live performances.

Features
Tone and Decay controls
CV control with an attenuator over Tone
Manual trigger
Accent for Better expression

Decay range: 120ms - 1100ms
Audio output level: -5...+5V
CV level (full span): -5 - +5V
Trigger level: 5V
Trigger time: 1ms
Accent CV level: 10V
Power consumption: 24mA@+12V, 20mA@-12V
Module width: 6HP
Module depth: 35mm

On this run of modules the Pitch & Decay CV inputs are inverted: rising CV will decrease pitch, falling - increase.
Read more
 1 in stock $141.73
Click for better price!
or call +44 20 7424 1960
quote 690940
Erica Synths Cowbell Yocto 808 Cowbell Module
Cat: 732855 Rel: 10 Sep 19
 
Expanded version of the popular Yocto (808) cowbell
Notes: Erica Synths Cowbell module is an extended, modular version of Yocto (808) cowbell. For more sonic versatility we have added Tune and Decay controls, as well as Tune CV with an attenuator for nice vibratos.

Features
Manually and CV controlled tune
Decay control
Manual trigger
Accent input
Module width - 6HP
Module depth - 35mm
The module is developed in collaboration with the French company e-licktronic.

Technical specifications:

Decay range: 120ms - 1100ms
Audio output level: -5...+5V
CV level (full span): -5V - +5V
Trigger level: 5V
Trigger time: 1ms
Accent CV level: 10V
Power consumption: 14mA@+12V / 10mA@-12V
Module width: 6 HP
Module depth: 40 mm
Read more
MRP:$110.44 SAVE 29%
 2 in stock $78.36
Click for better price!
or call +44 20 7424 1960
quote 732855
Erica Synths Cymbals Distinct Topology Digital/Analogue Cymbals Module
Cat: 712709 Rel: 10 Dec 18
 
Distinct topology digital/analogue cymbals module - 10HP
Notes: Erica Synths Cymbals is a distinct topology digital/analogue module, where cymbal samples are passed thru AS3330 based VCA and controlled via envelope generators of unique design. The module features 10 sets of custom Crash and Ride cymbal samples with Tune control and individual Decay control. Accent and CV control over Tone and Decay allow you to create lot of variations in the Cymbals track. An extra feature is sample looping - when it's on, a certain part of the sample is looped while the envelope decay is on, thus creating a distinct, delay-like effect. Cymbal samples are developed by producer and musician Nero Bellum.

Features
10 sets of custom cymbal samples
Analogue VCA and EG
Tune and Decay controls
CV control with an attenuators over Tune and Decay
Sample loop for Crash and Ride
Manual triggers
Accent for better expression

Audio output level: -5...+5V
CV level (full span): -5V - +5V
Accent CV level: 10V
Tigger level: 5V
Trigger time: 1ms
Power consumption: 95mA @ +12V, 36mA @ -12V
Module width: 10HP
Module depth: 45mm
Read more
 1 in stock $200.89
Click for better price!
or call +44 20 7424 1960
quote 712709
Erica Synths DB-01 Analogue Desktop Bassline Synthesiser & Sequencer
Cat: 753844 Rel: 17 Apr 20
 
Desktop bassline synthesiser & sequencer
Notes: From basslines and rave sounds to massive drones and drums - the Erica Synths Bassline DB-01 synthesizer lets you explore new territories of sound and performance techniques and go from a melody to noise and back in no time. The DB-01 packs an analogue Erica Synths signature sound engine with an advanced sequencer on top of it.

Features:
All analogue sound engine
Aggresive acidbox filter design
One knob overdrive for even more destructive sound
Transistor based sub-oscillator
Independent amplitude, filter cutoff and pitch envelopes
BBD based detune for massive swarm sound
Syncable LFO with multiple waveforms for FM and VCF modulation
Noise source
Intuitive, easy to use sequencer for up to 64 step patterns
Sequence transposing
Pattern randomization
Arpeggiator
Modulation track with VCF cutoff automation
Built in and user defined scales with micro tonal possibilities
Analogue clock in and out
CV/Gate output/input
MIDI IN and THRU - play it with a keyboard!
8 banks of 16 pattern memory
Compact, durable aluminium enclosure
Read more
 2 in stock $476.47
Click for better price!
or call +44 20 7424 1960
quote 753844
Erica Synths DJ VCF Stereo Analogue DJ-Style Filter Module
Cat: 989863 Rel: 08 Jan 24
 
Analogue stereo DJ filter module - 8HP
Notes: Stereo version of Erica's DJ-style filter module designed with drums in mind. Simple three-knob interface gives control over joint low-pass/high-pass resonant filter with CV input.

Supplier's Notes:
As its name suggests, the Erica Synths DJ VCF STEREO module provides sound treatment functionality typically found on DJ decks - it is fully open when the cutoff knob is at 12:00. When turned counter-clockwise, lowpass filtering is applied and when turned clockwise, highpass filtering is initiated. Additionally, there is a nice-sounding, adjustable resonance parameter. This provides hands-on control over the sound during performances as well as unconventional timbre modulations that are hard to achieve with conventional state variable filters.

Features

Fully analogue stereo DJ-style VCF
Manual cutoff and resonance control
Two cutoff CV inputs, one with an attenuverter
Technical specifications:

Audio level: 10Vptp
CV level: -10V - +10V
Filter slope: 24dB/oct
Power consumption: +109mA, -101mA
Module width: 8HP
Module depth: 35mm
Read more
 1 in stock $189.32
Click for better price!
or call +44 20 7424 1960
quote 989863
Erica Synths Drum Modulator Dual Syncable LFO Module (B-STOCK)
Cat: 982518 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.
Read more
MRP:$219.83 SAVE 19%
 1 in stock $177.24
Erica Synths Drum Sequencer Advanced Drum Sequencer Module
Cat: 690935 Rel: 15 Jun 18
 
Advanced drum sequencer module with 16 trigger outs - 42HP
Notes: IThe Drum Sequencer is easy to use, classical X0X style live performance oriented sequencer module that provides the ultimate control over your system. Erica Synths Drum Sequencer might be the last modular sequencer for drums and basslines you will ever have to buy!

Features:
16x trigger outputs
12x accent outs
1x CV track with scales
1x Gate track
2x LFO with independent or synced to the BPM frequency
LFO attenuation per out
Max pattern length = 64 steps
Time signature per Track
Direction per track/pattern
Pattern length per Track
Shuffle per track
Probability per step
Retrigger per step
Time shift per step
Instant pattern switching
Solo/Mute tracks
Step/Tap record modes
8 Banks of 16 Patterns
Quick Copy/Paste per tracks & patterns
Pattern linking
Song mode
MIDI sync in with Start/Stop
External 4PPQ clock in
Firmware upgrade via MIDI SysEx??
Specifications and appearance are subject to change without notice for improvement.

Technical specifications:
Trigger amplitude: 5V
Panel Width: 42 HP
Module depth: 30mm
Power consumption: 152mA@+12V, 56mA@-12V
Read more
MRP:$587.97 SAVE 16%
 2 in stock $494.35
Erica Synths Drum Sequencer Advanced Drum Sequencer Module With 16 Trigger Outs (B-STOCK)
Cat: 977998 Rel: 01 Jan 90
 
B-STOCK: Box opened, light surface marks, product in perfect working condition
Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


Inspired by Roland's TR-x0x sequencers, the Drum Sequencer brings that classic approach to Eurorack, offering a massive 16 trigger channels with gate and accent outputs, plus a CV/gate track for synths.

Supplier's notes:
X0X-style beat creation for modular systems - Erica's drum sequencer is based on the concepts of classic Roland TR rhythm composers. The module offers 16 trigger channels, twelve of which also feature accent outputs. Additionally, there is a CV and a gate track, meaning you can also notate a bass line or melody. The maximum pattern length is 64 steps. Extensive playback and random functions plus two LFOs help you with creating lively results. Large buttons provide a fantastic feel while programming patterns.
Read more
MRP:$598.49 SAVE 16%
 1 in stock $502.77
150/91(ページ1/2)の商品
1  2  »
Cart subtotal: