Secure shopping 安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

Secure shopping 安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Labels

View:
Options
118/18(ページ1/1)の商品
FORTHCOMING
Bastl Instruments BitBoard Breadboard Add On Module For BitRanger (BitBoard & 2 pots, 2 buttons, 4 switches)
Cat: 670996 Rel: 30 Nov 17
 
Add-on module for the Bastl BitRanger - includes pots, buttons & switches
Notes: The BitBoard is a breadboard add-on module that allows users to build custom circuits and user interfaces for the BitRanger. It is solidly attached to the BitRanger and provides performance friendly stability.

It either comes just on its own, or with with 2 pots, 2 buttons and 4 switches which can help you to start designing your own bitRanger interface.

The BitBoard is closely linked to a project called OMSYNTH which is a breadboard based open modular synthesizer by Casper electronics. Several tutorials on how to make circuits are available on the OMSYNTH webpage.
Read more
e-mail me when released
coming soon $TBA
FORTHCOMING
Bastl Instruments BitBoard Breadboard Add On Module For BitRanger (BitBoard only)
Cat: 670994 Rel: 30 Nov 17
 
Add-on module for the Bastl BitRanger
Notes: The BitBoard is a breadboard add-on module that allows users to build custom circuits and user interfaces for the BitRanger. It is solidly attached to the BitRanger and provides performance friendly stability.

It either comes just on its own, or with with 2 pots, 2 buttons and 4 switches which can help you to start designing your own bitRanger interface.

The BitBoard is closely linked to a project called OMSYNTH which is a breadboard based open modular synthesizer by Casper electronics. Several tutorials on how to make circuits are available on the OMSYNTH webpage.
Read more
e-mail me when released
coming soon $TBA
Cat: 616272 Rel: 19 Sep 16
 
Patchable analog logic computer with 4 modes of operation selectable by 2 switches
Notes: The bitRanger is a patchable analog logic computer which sculpts sonic worlds ranging from data noise to melodic arpeggios. While being a handheld standalone synth it is also right at home in the music studio. Extensive connectivity makes it so flexible that it can connect to almost anything: CV control its unique sound, sync it with drum machines and sequencers or use it as an algorithmic CV / GATE pattern generator.

The patchbay of the bitRanger is a place for exploration where you can simply connect outputs to inputs to see what happens. This can be done methodically or with complete experimental abandon. Go nuts! Battery Power and a built in speaker make the bitRanger totally portable. Tweak it’s 4 knobs, 8 switches and more than 100 patch points in the woods, on the beach, on a train and in the studio.
Read more
 1 in stock $266.29
Cat: 616294 Rel: 02 Oct 17
 
Complete analog processing modular system
Notes: Bob is an analog processing modular system designed with live performance in mind. Instrument amplifier input and line/guitar level output makes it so universal that it can work in any setup with almost any instrument. The modular case has bottom insert for a standard microphone stand which makes it look great on the stage! All modules and wooden enclosures are locally sourced and hand crafted in Brno, Czech Republic.

With Bob you can achieve many classical effects with fully analog processing at ultimate sound quality. Because it is modular you can always try new combinations of these effects and explore new territories in between and beyond them. It is even capable of creating many different synth voices on its own.

Bob is a more expandable system with an addition of foot control and many complex modulation sources.
Read more
 1 in stock $1,734.33
Cat: 616295 Rel: 02 Oct 17
 
Analog processing modular system
Notes: Bobek is an analog processing modular system designed with live performance in mind. Instrument amplifier input and line/guitar level output makes it so universal that it can work in any setup with almost any instrument. The modular case has bottom insert for a standard microphone stand which makes it look great on the stage! All modules and wooden enclosures are locally sourced and hand crafted in Brno, Czech Republic.

With Bobek you can achieve many classical effects with fully analog processing at ultimate sound quality. Because it is modular you can always try new combinations of these effects and explore new territories in between and beyond them. It is even capable of creating many different synth voices on its own.
Read more
 1 in stock $946.00
Cat: 616297 Rel: 18 Jul 16
 
Quad line output & headphones amp synth module - 5HP wide
Notes: CIAO !
Quad line output & headphones amp.

4 high quality line outputs for your modular in compact format. With line level clipping indication is handy for both recording and live. Headphone output can be quickly switched to listen to one of the stereo channels. It is also great for jamming because you can separately create a sound on your headphones and then flip a switch to mix it into the final mix directly with this module.
Read more
 1 in stock $157.10
Cat: 588591 Rel: 16 Nov 15
 
Voltage controller state variable filter (VCF) synthesizer module - 5HP wide
Notes: Cinnamon is a very unique sounding filter. The presence of drive and character switches makes it a multi-flavoured spice for your sound !
Read more
 5 in stock $137.04
Cat: 616302 Rel: 18 Jul 16
 
Dual voltage controlled footswitch synth module
Notes: DupDup:
Dual voltage controlled footswitch

Add stomp box type of control to your modular! Use floor switches to bypass signal processor, switch between any two signals, mute trigger sequence for your kick drum or just send a gate signal! It can be used in either momentary or switch mode! Works with any button, but with the ones we provide it also gives you visual indication on the floor. It can be also used as simple voltage controlled switch.
Read more
 1 in stock $94.71
Cat: 648904 Rel: 05 Jun 17
 
Audio click to modular clock/trigger converter
Notes: Klik is a synchronisation device that enables you to make analog, rock solid sync signals from your computer and your HW synths. The KLIK revives the old-school sync technique of using an audio track for synchronisation purposes. Record your synths exactly on the grid into your DAW while compensating for the latency of your sound card. Jam really tight between your computer and your HW and add groove to your clock.

The KLIK converts audio line level (or headphone) output signals from any sound card and makes perfect synchronisation pulses in the modular level.

KLIK converts two signals (left and right input) - typically clock and reset signal. The reset signal also has a button which you can use to re-sync your HW or use for sending manual gate signals. You can send rhythmical triggers thru the KLIK as well.

With KLIK you can use any channel of your soundcard or repurpose the unused headphone jack on your Macbook by creating aggregate device. Or use an old mp3 player as a stable clock source with presets!

And as a bonus if you run any audio signal thru the KLIK to apply a harsh bit-crushing effect!

Please note it is designed to only transmit clock/trigger/gate information. Its output is either low or high 0 or 5V. It doesn't output continuous CV signals.
Read more
 1 in stock $57.93
Cat: 556336 Rel: 12 Jan 15
 
Monophonic granular sampler with MicroSD card slot
Notes: MicroGranny 2 is monophonic granular sampler. It reads wav samples from microSD card and applies granular algorithms to them. You can also adjust start, end, sample rate (tuned or free run), crush and envelope (attack release). MIDI Input allows external control of all parameters as well as transposition of the samples, or playing individual grains by different keys.
Read more
 1 in stock $183.85
Cat: 596930 Rel: 21 Dec 15
 
Monophonic granular sampler with MicroSD card slot - features software version 2.5
Notes: microGranny 2 is a monophonic granular sampler. It reads wav samples from microSD card and applies granular algorithms to them. You can also adjust start, end, sample rate (tuned or free run), crush and envelope (attack release). MIDI Input allows external control of all parameters as well as transposition of the samples, or playing individual grains by different keys.

Version 2.5 update:

- Added "store instant loop" feature (go to instant loop and press save combo (FN>REC) = start and end point will match the points you marked in instant loop and instant loop switches off)
- Way more detailed control of grain size and shift speed - curve mapping for the parameters
- Improvements in stability
- Improved randomizer
- Fixed midi clock absence bug
- Fixed midi grain playback in reverse
- Removed midi side chain function
Read more
 2 in stock $200.55
Cat: 588618 Rel: 16 Nov 15
 
4 channel voltage controlled amplifier (VCA) synthesizer module - 10HP wide
Notes: Quattro Figaro is a 4 channel VCA (voltage controlled amplifier) with one CV inverter per channel and outputs of mixed channels. Each channel A,B,C and D has its GAIN knob, CV IN jack with ATTENUATOR knob, INVERTED CV OUT, SIGNAL IN and SIGNAL OUT jacks. The signal gets amplified with gain linear to the control voltage. Control voltages above 6 volts get compressed non-linearly (property of VCA chip). Maximum gain is a little above 2. Amplified signal is outputted from the SIG OUT jack.

Internal routing:

Internal routing enables you to use the QF as a simple and powerful panning /crossfading tool. Two pairs (A+B and C+D) are internally routed via the jack switches, which enables you to quickly setup the panning situation. Because the internal routing is done via the connector switches, you can use all the channels independently by plugging in the cables, which disconnects the internal routing.

Signal from channel A is routed to the switch on signal jack of channel B (the same with C and D), which means that the signal from channel A is connected to channel B as long as there is no jack plugged into the signal jack of channel B.

INVERTED CV OUT of channel A is also connected to the switch on the CV IN of channel B (the same with C and D), which means that the inverted CV is connected to the CV input of signal B as long as there is no jack plugged into the signal jack of channel B.

Mixed outputs:

The mixed outputs enable you to use QF as voltage controlled mixer or stereo panning voltage controlled mixer. There are outputs of signal A mixed with signal C, signal B mixed with signal D (note that these two outputs are inverted), all signals mixed together and all signals mixed together but inverted.
Read more
 1 in stock $197.78
Cat: 588621 Rel: 16 Nov 15
 
Dual decay & voltage controlled amplifier (VCA) synthesizer module - 4HP wide
Notes: In the front of every ski there is a curve similar to a decay envelope. Skis module has two channels A and B and each of them consists of a decay envelope with knob control and a VCA. There is a TRIGGER input to trigger the envelope, a buffered envelope output which is normalised to the CV input of the VCA. Than there is SIGNAL IN and OUT of the VCA.

There is also a CRUNCH switch which activates a special mosfet lo-fi VCA circuit inspired by designs of Standa Filip. This adds a slight crunchy character which changes with the decay of the envelope.

A typical application of Skis is to take two signals (noises for example) and generate drum sounds with adjustable DECAY from them with a TRIGGER signal. However, you can also use the two VCAs and two DECAY envelopes independently.
Read more
 1 in stock $117.00
FORTHCOMING
Bastl Instruments Synapsis 4x4 Pushbutton Matrix For Bit Ranger
Cat: 670993 Rel: 30 Nov 17
 
Push-button control for the Bastl Bit Ranger
Notes: The Synapsis is a 4x4 pushbutton matrix that offers performative control of the Bit Ranger.

There are 8 patch points connected to 4 rows (ABCD) and 4 columns (1234) of buttons. Pressing button A1 connects point A to point 1. A2 connects A to 2. B2 connects B to 2 and so on.

Package includes:

- The Synapsis
- 10 short + 10 long jumper wires
- Hex key

Using the Synapsis:

It is best used by dedicating rows to outputs (like divider or mix bits) and columns to inputs (like the byte section or inhibit points). In this configuration every possible combination of buttons will connect outputs to inputs and cause a change in the behaviour of the BitRanger. As always it is best to experiment and try new things.

Installing the Synapsis:

- Remove the screws from the bottom of the bit ranger and then remove the bottom plate.
- Remove the small section of plastic from the front edge of the face plate and place it somewhere safe. In newer models there is a slot in the middle of the bottom opening where the mini plate can be placed for storage.
- Screw the bottom plate back onto the BitRanger.
- Slide the Synapsis into the opening in the front.
- Place screws through the holes in the front of the bottom plate to secure Synapsis in place.

That's it!
Read more
e-mail me when released
coming soon $TBA
Cat: 645235 Rel: 16 Nov 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Tea kick is a universal analog circuit which is based on improved version of the twin T resonant structure, and mainly inspired by analog drum designs of Standa Filip. The basic principle or this drum is to create a virtual electronic membrane which you strike with electricity, the membrane vibrates and creates a very natural drum wave which, when outputted to a speaker (another membrane) sounds very authentic. To adjust thi membrane, we have the TUNE and RESONANCE control. Think of using those as if tuning an acoustic drum. There is a CV input for tuning the circuit so it can change character from a bass drum through all the toms to woodblock. There is main TUNE control knob for the tuning and also a CV Input with ATTENUATOR.

There is a RESONANCE control which affects how resonant the circuit is. However, the resonance also affects the tuning: the more resonance, the lower the drum sound is. Add resonance to get longer decay drum sounds. The resonance range switch can limit resonance from self oscillating. When you switch it up, the resonance control makes the circuit self oscillate, so that it can be used as a kind of VCO.

Tea kick also has a click generator with tone control which is mixed into the signal. Think of the click as of a stick which you can use to strike an acoustic membrane of a drum - the resulting sound has different character. The click tone control also affects the spectrum of the twin T circuit. There is also SQUARE output and WTF input available for more fun experiments.

Beyond the drum:

Tea kick can be either used as predictable drum circuit or can go totally nuts as an experimental oscillator. There is several ways how to route inputs and outputs to generate feedback loops to generate signal. However there are several ways how you can use it to modify and filter signal from another VCO. We highly recommend to try routing any oscillator to the trigger input. There is a lot to explore here.
Read more
 1 in stock $83.03
Cat: 616311 Rel: 18 Jul 16
 
Combination of 3 utility modules: VCO, Comparator and Sample & Hold - 5HP wide
Notes: Tromso is a combination of 3 basic utility modules: VCO, Comparator and Sample & Hold. Internal normalisation allows you to instantly use it as voltage controllable analog downsampler (or sample rate reducer if you like). The sample rate is set by VCO Rate and a sort of "dry/wet" mix effect which is achieved by adjusting the Threshold when in the Track & Hold mode.

This architecture was inspired by a machine called Distortotron made in 1994 - arguably the first analog downsampler and bit distortion of its kind. That machine came from a collaboration between Norwegian musician Mental Overdrive based in Tromso and the inventor group Psybe (Svein Berge and Henrik Sundt). It was created from a need to bring back oldschool sampler aliasing and lo-fi effects and heavily influenced the sound of album Plugged which is the landmark of the so called Tromso sound.

The VCO of Tromso module can track one volt per octave when the Attenuator on the FM input is fully open which makes it possible to have the downsampling effect track with the pitch of a played note.

All 3 utility modules of Tromso can also be used completely independently because the normalisation disappears once you plug a connector into the inputs.
Read more
 1 in stock $135.93
Cat: 588628 Rel: 16 Nov 15
 
Broken contact emulator synthesizer module - 1HP wide
Notes: The broken cables and bad contacts are really vintage thing ! Which means sometimes you really want them. Sometimes you really need them ! And yes ! you can really love them!

This is why we carefully designed this 1HP broken contact emulator in form of 2x 4 way multiple!

It is not only a random type of generator to break your patches, it is also very usefull as a CABLE HANGER or as 1HP blank panel. And most of all... it is the ONE module you would love to talk about with your friends!

How to calibrate:

- the module cannot be mounted in the rack for successful calibration
- please don't use it uncalibrated
- Take a broken patchcable (works also with functioning one, but still...)
- push it thru the connector hole you want to calibrate
- keep moving the cable inside the hole to all sides
- keep putting it in and out until you get the feeling and broken-ness you desire
- repeat that process with all connector holes of the module
- note: each hole can and should be broken differently - but we leave that part of the process to your personal taste
Read more
 1 in stock $6.96
118/18(ページ1/1)の商品

Labels

 
Release Date
 
Featured
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close