安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Turntable accessories

View:
Options
150/80(ページ1/2)の商品
1  2  »
Cat: 636089 Rel: 23 Jan 17
 
Carbon fibre felt record mat
Notes: AM's carbon fibre felt mat removes static charges from the record during playing for hiss and pop free listening. Unlike other anti-static mats on the market that claim to be made with carbon fibre, this one actually is.

Silence background noise and improve your soundstage, imaging, and tonal accuracy with the Anti-static record mat.

Made from felted carbon filaments to reduce friction and static build-up, the Anti-static record mat offers the clean sound of felt without the static.

The self-damping properties of the carbon fibre are especially effective with analogue playback, where small stray vibrations can cause big problems. Open up the sound spectrum of your collection and improve their everyday performance.
Read more
out of stock $19.60
AM Clean Sound Stylus Cleaner (stylus cleaner + brush)
Cat: 617898 Rel: 29 Jun 16
 
Pick-up needle/Stylus cleaner fluid & brush
Notes: Eliminate dust, dirt and static build-up from your record player's stylus with the Stylus cleaner.
The non-abrasive cleaning fluid and gentle brush safely and effectively lift dust, grit and particles worn from the stylus tip to reduce stylus and record wear, and improve tonal accuracy.
Maintain your stylus, improve audio fidelity and lengthen the life of your records.

- 20 ml cleaning solution for the pick-up needle
- The cleaning brush is enclosed inside the lid
- For those who care for their collection of vintage or brand new vinyl records
Read more
out of stock $10.59
Cat: 636101 Rel: 08 Mar 17
 
Carbon fibre brush for eliminating dust, dirt & static build-up
Notes: AM's carbon fibre brush removes static charges from the stylus. For cleaning the pick-up, run the brush along the cantilever in the direction of the stylus. Unlike other pick-up brushes on the market that claim to be made with carbon fibre, this one actually is.

Eliminate dust, dirt and static build-up from your record player's stylus with the Pickup brush.

The conductivity of the brush's carbon fibre bristles helps to drain static charge from the stylus and lift any residual dust and grime.

Maintain your stylus, improve audio fidelity and lengthen the life of your records.
Read more
 3 in stock $10.59
Cat: 561223 Rel: 23 Jul 15
 
Acoustic isolation platform for turntables
Notes: The Auralex ISO-Tone Turntable Isolation Platform is specifically engineered to decouple turntables from the supporting surfaces they rest on. The ISO-Tone diminishes structural vibrations and commonly associated acoustic feedback associated with desktops and DJ cases. Designed for turntablists, mobile DJs, audiophiles, rental houses and anyone seeking enhanced turntable performance, purity and accuracy, the ISO-Tone features a 0.75" layer of black fabric-wrapped MDF that floats on a layer of Auralex's proprietary Platfoam that protects turntables from unwanted vibrations. The 17.75" W x 14.25" D x 1.75" H isolation platform accommodates most turntables and the low-profile design enables easy transport.

- Creates A Cleaner, More Accurate Sound

- Decouples Turntable From Its Supporting Structure

- Reduces Acoustic Feedback
Read more
out of stock $73.12
Cat: 715217 Rel: 21 Dec 18
 
4 x isolation pads for turntables & heavy equipment
Notes: The superpods are manufactured in the UK by the same company that brought us the Polipods and Foculpods. The superpods build on the design by offering the same isolation and resonance control as the polipods but for far heavier equipment such as power amps. Each superpod will support up to 25kg in weight so 4 together will support 100kg.

The superpods also work particularly well under many turntables.
Read more
out of stock $37.09
Cat: 715220 Rel: 08 Jan 19
 
Pack of 4 isolation feet for turntables
Notes: TECHNIBOOTS are isolation slip over boots for Technics SL1200 series turntables including SL1200 and SL1210, and are suitable for DJ's and Audiophiles alike. The product is made of Absorbothane, which is an advanced polymer vibration absorption material. Vibration is absorbed into the boot and dissipated before reaching the delicate cartridge and causing signal degradation.
Read more
out of stock $42.38
Cat: 608323 Rel: 14 Apr 16
 
Vibration absorbing support pads for use with audio/video/computer equipment up to 25KG
Notes: Foculpods are high performance vibration absorbing supports designed to be placed under CD Players, Turntables, Amplifiers, Loudspeakers and all other Audio, Video & Computer equipment.

Designed using computer modelling techniques the spherical surface provides even contact and uniform.

Foculpods are precisely replicated energy absorbing pads. they improve the detail/stereo imaging of sensitive audio equipment. They work by absorbing vibrations in the component chassis, or from the shelf or rack. Loosely grouped molecules within the material rub together and transfer the vibration into heat. The tacky surface eagerly bondes to metal chassis and wooden shelves, further improving vibration.

Simply place a pad under each corner of the selected equipment. For the most efffective result a set is required for each unit.
Read more
out of stock $21.46
Cat: 608325 Rel: 14 Apr 16
 
Vibration absorbing support pads for use with audio/video/computer equipment up to 10KG
Notes: Polipods are precisely replicated energy absorbing pads. They improve the detail/stereo imaging of sensitive audio equipment. They work by absorbing vibrations in the component chassis, or from the shelf or rack. Loosely grouped molecules within the material rub together and transfer the vibration into heat. The tacky surface eagerly bonds to metal chassis and wooden shelves, further improving vibration.

Polipods are high performance vibration absorbing supports designed to be placed under CD Players, Turntables, Amplifiers, Loudspeakers and all other Audio, Video & Computer equipment.

Designed using computer modelling techniques the spherical surface provides even contact and uniform energy distribution.

Simply place a pad under each corner of the selected equipment. For the most effective result a set is required for each unit.
Read more
 2 in stock $29.94
Cat: 696610 Rel: 14 Apr 16
 
B-STOCK: Packaging slightly damaged, product in perfect working order
Notes: ***B-STOCK: Packaging slightly damaged, product in perfect working order***


Polipods are precisely replicated energy absorbing pads. They improve the detail/stereo imaging of sensitive audio equipment. They work by absorbing vibrations in the component chassis, or from the shelf or rack. Loosely grouped molecules within the material rub together and transfer the vibration into heat. The tacky surface eagerly bonds to metal chassis and wooden shelves, further improving vibration.

Polipods are high performance vibration absorbing supports designed to be placed under CD Players, Turntables, Amplifiers, Loudspeakers and all other Audio, Video & Computer equipment.

Designed using computer modelling techniques the spherical surface provides even contact and uniform energy distribution.

Simply place a pad under each corner of the selected equipment. For the most effective result a set is required for each unit.
Read more
out of stock $24.65
DMC
Cat: 529280 Rel: 04 Apr 14
 
Fabric turntable cover, universal fitting
Notes: Hard-wearing, durable fabric
Protects against dust and grime
Ideal replacement for ugly or damaged lids
Read more
out of stock $21.46
Free Float Deck Stabilizers (black) (deck stabilizers (pair))
Cat: 254042 Rel: 25 Jan 07
 
Pair of inflatable deck stabilizers to reduce vibration and needle jumping during mixing
Notes: The Freefloat is a specially designed aircushion for turntables in a DJ set-up. By placing a turntable on a Freefloat, direct contact between the turntable and the DJ booth is avoided. This results in improved skip resistance of the needles and eliminates rumble problems completely. Because there is less chance of feedback you can push your levels more and get a little more low-end frequency. The Freefloat is a very simple but sturdy and well-executed tool to help all DJs and sound engineers.

Read more
out of stock $20.14
Cat: 199963 Rel: 10 Jan 06
 
Pair of inflatable deck stabilizers to reduce vibration and needle jumping during mixing. Inflatable air cushion protects turntable from vibrations and rumble. (Blue with Aroma Recordings logo).
Notes: The Freefloat is a specially designed aircushion for turntables in a DJ set-up. By placing a turntable on a Freefloat, direct contact between the turntable and the DJ booth is avoided. This results in improved skip resistance of the needles and eliminates rumble problems completely. Because there is less chance of feedback you can push your levels more and get a little more low-end frequency. The Freefloat is a very simple but sturdy and well-executed tool to help all DJs and sound engineers.
Read more
out of stock $20.93
Cat: 199964 Rel: 10 Jan 06
 
Pair of inflatable deck stabilizers to reduce vibration and needle jumping during mixing
Notes: The Freefloat is a specially designed aircushion for turntables in a DJ set-up. By placing a turntable on a Freefloat, direct contact between the turntable and the DJ booth is avoided. This results in improved skip resistance of the needles and eliminates rumble problems completely. Because there is less chance of feedback you can push your levels more and get a little more low-end frequency. The Freefloat is a very simple but sturdy and well-executed tool to help all DJs and sound engineers.
Read more
out of stock $20.93
Free Float Deck Stabilizers (White) (deck stabilizers (pair))
Cat: 203815 Rel: 05 Jan 06
 
Pair of inflatable deck stabilizers to reduce vibration and needle jumping during mixing. Inflatable air cushion protects turntable from vibrations and rumble. (White with blue Magik Muzik logo).
Notes: The Freefloat is a specially designed aircushion for turntables in a DJ set-up. By placing a turntable on a Freefloat, direct contact between the turntable and the DJ booth is avoided. This results in improved skip resistance of the needles and eliminates rumble problems completely. Because there is less chance of feedback you can push your levels more and get a little more low-end frequency. The Freefloat is a very simple but sturdy and well-executed tool to help all DJs and sound engineers.
Read more
out of stock $20.93
Cat: 139223 Rel: 02 Mar 04
 
Pair of inflatable deck stabilizers to reduce vibration and needle jumping during mixing
Notes: The Freefloat is a specially designed aircushion for turntables in a DJ set-up. By placing a turntable on a freefloat, direct contact between the turntable and the DJ booth is avoided. This results in improved skip resistance of the needles and eliminates rumble problems completely. Because there is less chance of feedback you can push your levels more and get a little more low-end frequency. The freefloat is a very simple but sturdy and well-executed tool to help all DJs and sound engineers.

Inflatable air cushion protects turntable from vibrations and rumble.
Read more
out of stock $18.75
Cat: 686605 Rel: 23 Jul 18
 
Cork LP slipmat
Notes: Cork turntable mat, helps to eliminate static electricity on records.

- Reduces vibrations
- Improves sound quality
- 300mm diameter
- 3mm thickness
Read more
out of stock $5.29
Cat: 661383 Rel: 05 Sep 17
 
Stylus cleaning kit featuring brush & fluid
Notes: Even if you use your GrooveWasher to clean your records, room dust, lint and cat hair can accumulate on your stylus. Your stylus will "plow" out any debris that isn't removed from a record cleaning.

We sourced and tested dozens of brush styles, handle types and bristles. Straight "pencil" brushes. Artist camel hair brushes. Toothbrush styles. Mascara brushes.

We preferred a 90 degree angle. Long bristles so the brush can clean the underside of the cartridge as well as the stylus. Dense bristles to pull off gunky coatings but soft to avoid damage to the stylus or cantilever. Those are the effective cleaning features of our new stylus brush. This brush can be used dry or with a couple of drops of SC1 Fluid.

This kit includes our SC1 Stylus Fluid. It's a cousin of our G2 Fluid with a bit more organic alcohol. The stylus can become clogged with oily pressing release compound from new records and residue from other record cleaning and preservative fluids. SC1 Stylus Fluid dissolves these contaminants and the SC1 Brush removes them.

Note: Hard surface cleaning fluids like G2 and SC1 can be irritating to skin and eyes. Avoid contact with your eyes. Flush with clean water. Keep all cleaning products out of the reach of children.
Read more
out of stock $17.59
Groovy Stylus Cleaner Kit (record cleaning kit)
Cat: 624408 Rel: 05 Sep 16
 
Stylus cleaning kit, includes cleaning fluid, nylon bristled brush and storage bag
Notes: The Groovy Stylus Cleaning Kit breaks down hard to see build-up with the dual action of the fluid and special brush.

Includes .34 oz of cleaning fluid & a dense nylon bristled brush. Comes with a cotton draw-string bag for storage.
Read more
out of stock $13.17
Cat: 554220 Rel: 11 Nov 14
 
Analogue test LP with 2 sides of vital tools for testing and setting up your analogue system
Notes: This is the one record no analog system should be without. Featuring two full sides of excellent tools, the HiFi News Test LP is the best investment you can make. With tracks for testing everything from channel balance to azimuth, the HiFi News Test LP offers simple to use and comprehensive tests to allow everyone from analog newbies to record collectors get the most out of their turntables.

SIDE ONE
Track 1: Channel Identification: Voice on Left channel then on Right channel
Reversing left and right channels is one of the most common mistakes in an analog rig. If the channels are reversed, imaging, depth and dynamic range suffer. This track ensures the most basic test for a high performance system is covered.

Track 2: Phasing: Voice alternately "in phase" and "out of phase"
Reversing the cartridge leads is the second most common mistake made in an analog rig. Miswiring the phase at the cartridge destroys imaging, space, depth, bass extension and overall system gain. This track offers easily audible cues to highlight phase inaccuracies.

Tracks 3, 4, 5: Channel Balance: -20db pink noise tests
These three tracks provide mid-range weighted random noise to ensure tonal balance is set correctly. When listening, neither the left nor the right speaker should be louder. Track 3 is pink noise in both channels, Track 4 is Left only and Track 5 is Right Only. Check these tracks before moving on to the Bias tracks. (NOTE: Test Cut 4 and 5 for use with the Fozgometer Azimuth Device)

Tracks 6, 7, 8: Bias setting: 300Hz tone, both channels at +12dB, +14dB, +16dB, respectively
These tracks are for setting anti-skate. If the 300Hz test tone is heard distorting or buzzing on either channel, then the anti-skate function needs to be adjusted. Each successive track is more difficult for the arm and cartridge; increasing tracking force towards the top of the cartridge's recommended range will assist in properly resolving these tracks.

Track 9: Bias setting: 300Hz tone, both channels +18dB
This track stands alone as perhaps the most difficult track for a cartridge to track cleanly. Although it's only 2dB higher than track 8, this track is perhaps the most famous of the four, as only the very best gear and alignments can pass it unscathed. For those with more modest gear, results from this track should be taken with a grain of salt.

SIDE TWO
Tracks 1, 4, 8: Tracking ability: 300Hz tone, both channels +15dB
These three tracks contain identical information, which enables testing of the consistency of the cartridge's track across the entire surface of the record. These tracks - outside, middle and center - are designed to be used together, making sure that the cartridge sounds the same in all three positions. These tracks are also great for checking anti-skate and tracking force settings. Consistency is the key with these three tracks, if all three are spot-on, then most records should sound great.

Tracks 2 & 3: Cartridge & Arm, Lateral & Vertical Resonance Test
These two tracks are used to test the resonant frequency or your tonearm and cartridge combination in both the vertical and horizontal domains. These tracks offer both a visual and auditory indication of the resonant frequency; the stylus will "wobble" and the test tone will warble. A resonant frequency between 8 - 15Hz is ideal.

Track 5: Cartridge alignment test: 300Hz, both channels +6dB
Ideal playback occurs when the stylus is exactly perpendicular to the record, this track tests the cartridge's azimuth adjustment. When this track is played back in stereo, there will be identical output from both speakers, however, when the output is switched to mono, both tracks should cancel each other out for, ideally, no output.

Track 6: Residual System Noise Test
There's nothing in this groove, this track is completely unmodulated. Played back at normal listening levels the stylus will highlight any noise created by the analog rig; a worn bearing, noisy motor or poor vibration control. Playback of this track should be completely silent.

Track 7: Full Range Frequency System Check: Both Channels, 20Hz -20KHz, Sweep
This track will give your system a real workout, as the deepest bass swells up to the highest of highs. Listen carefully for resonance within the system and in the room.
Read more
 More than 10 in stock $29.66
Cat: 634953 Rel: 22 Dec 16
 
Set of 4 anti-vibration isolating turntable feet
Notes: Helps dampen & stop vibrations to avoid needles jumping out of the grooves.

*** IMPORTANT NOTE ***

Due to the manufacturing process, some small bubbles will be present on the underside of each foot. This is normal and is due to the type of polymer used and the process of pouring the polymer into the mould. When poured, air bubbles are released and settle at the top of the mould. Also, the type of polymer used has a slight stickiness to it - again, this is normal and is a characteristic of the material used.
Read more
out of stock $80.55
Cat: 635830 Rel: 23 Dec 16
 
Plate cover designed for Technics 1200/1210 MK2 turntables - grey
Notes: Built from mild steel, laser cut and CNC folded, and welded to leave a seamless join. MK top plates are powder coated with a hard wearing finish. Easy to clean, the top plates help to protect decks from being marked. Just take the hinges off your deck and slip your top plate over.

Please note; the rear hinges must be removed before putting on the top plate. The hinges can be left off or put back after installation.
Read more
out of stock $94.33
Cat: 634948 Rel: 23 Dec 16
 
Plate cover designed for Technics 1200/1210 MK3 & MK5 turntables - grey
Notes: Built from mild steel, laser cut and CNC folded, and welded to leave a seamless join. MK top plates are powder coated with a hard wearing finish. Easy to clean, the top plates help to protect decks from being marked. Just take the hinges off your deck and slip your top plate over.

Please note; the rear hinges must be removed before putting on the top plate. The hinges can be left off or put back after installation.
Read more
 2 in stock $73.13
Mobile Fidelity GeoDisc Cartridge Alignment Tool (phono cartridge alignment tool)
Cat: 423304 Rel: 12 Apr 11
 
Phono cartridge alignment tool
Notes: Mobility Fidelity Sound Lab's Geo-Disc is the perfect complement to its series of limited edition original master recordings. Both will markedly improve the sonic performance of your stereo playback system. The high fidelity pleasures of original master recordings, even the audio content of conventional records, cannot be totally realized in your phonograph pickup apparatus (stylus/cartridge) if it is not aligned accurately. This is where the Geo-Disc is essential.

With extensive research and development, the Geo-Disc features a proprietary 3D visual system that delivers incredibly precise, uncomplicated, rapid and economical cartridge alignment. Mobile Fidelity's Geo-Disc is an LP sized platter that provides a very accurate spot for adjusting the cartridge overhang, and has visual gridlines for properly adjusting the offset angles. It's a lot easier to use than those flimsy plastic templates or paper cutouts that come with a lot of turntables. Just fit the disc on your platter and align using the simple printed graph based on the Baerwald alignment curve.
Read more
out of stock $45.56
Notes: Exclusive to Juno, here is design 2 of the Mukatsuku Records branded solid carbon steel record weight/disc stabiliser/vinyl stabilizer/record clamp and half the price of Audio Technica. This patterned version 2 limited to just 25 units worldwide is to mimic the image of plastic adapters of JukeBox 45s is protected in a black plastic powder paint finish.Weight is about 300 gram & fits all standard 7mm diameter turntable spindles

No springs, clips or screws required, just place the Mukatsuku disc stabilizer over the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics/less distortion bringing the record into more intimate contact with the platter.


The Mukatsuku disc stablizer is great for DJ use in a club environment or when recording from vinyl to digital. It may even possibly help dished records or skipping records. The weight keeps the record tight to the platter and is cut from 10mm carbon steel, and then coated in a black plastic paint finish

Measurements are roughly 77mm round x 10 mm thick
Read more
out of stock $18.01
Nagaoka AM801 Stylus Cleaner (stylus cleaning fluid)
Cat: 567495 Rel: 27 May 15
 
Stylus cleaning formula, for dissolving substances caught on the stylus tip
Notes: Your phonograph stylus also needs cleaning and care. Due to air pollution caused by both outside influences (traffic) and domestic influences (kitchen, smoking) a sticky film is deposited over time on to your records.

During playback the stylus will scrape this deposit from the groove which in turn causes a sticky film to form around the stylus tip which in turn traps other dirt and dust found on your record. This easily visible thick deposit not only influences the quality of the sound but may even cause damage to your favorite records.

The special formula of the Nagaoka AM-801 efficiently dissolves all the sticky substance caught on the stylus and removes this as well as the dirt trapped.
Read more
 3 in stock $17.49
Cat: 567541 Rel: 26 Mar 15
 
Pack of cartridge mounting screws, varying sizes
Notes: Nagaoka BN-7S

This pack includes

M2.6 x 3mm 4 each
M2.6 x 6mm 2 each
M2.6 x 8mm 2 each
M2.6 x 10mm 2 each
M2.6 x 12mm 2 each
M2.6 x 14mm 2 each
M2.6 x 18mm 4 each
M2.6 Nut 4 each
Nylon Washer 4 each
Read more
out of stock $15.10
Cat: 567540 Rel: 26 Mar 15
 
Pack of cartridge mounting screws, varying sizes
Notes: Nagaoka BN-7S

This pack includes

M2.6 x 3mm 4 each
M2.6 x 6mm 2 each
M2.6 x 8mm 2 each
M2.6 x 10mm 2 each
M2.6 x 12mm 2 each
M2.6 x 14mm 2 each
M2.6 x 18mm 4 each
M2.6 Nut 4 each
Nylon Washer 4 each
Read more
 2 in stock $15.37
Nagaoka Cartridge Display Case (cartridge display case)
Cat: 567531 Rel: 27 Mar 15
 
Ultra strong transparent display case for storing your cartridges
Notes: Ultra strong transparent display case for storing your cartridges
Read more
 2 in stock $15.89
Cat: 640571 Rel: 13 Feb 17
 
Replacement 12" felt turntable mat
Notes: The use of a felt mat helps ensure a smooth and mobile base for a record placed on the turntable platter. Often called a slip mat, their design is simply to sit under the record and on top of the platter.
Read more
out of stock $10.59
Cat: 640563 Rel: 14 Feb 17
 
Set of 4 high-quality damping feet - black
Notes: Audio components can be sensitive to mechanical vibration, which limits their high-fidelity performance. To keep it from your valuable equipment, Absorb It feet are the perfect solution. Especially designed for turntables, all disc players, tube amplifiers and other components, which might be sensitive to vibrancy and are positioned on high vibrating surfaces like glass, thin wood panels and metal. Place Absorb It underneath the original feet of each unit and transmission of vibration will be avoided. With Absorb It you can play up to 30% louder without the risk of acoustical feedback.

Typically, surfaces are excited by speakers, subwoofers or simply by low frequency emission caused by traffic of cars and trains and transformers. Almost all feet of audio devices, like turntables, amplifiers, disc players are not designed for sufficiently isolating from frequency ranges, that really matter. Absorb It consists of high-tech synthetic rubber material, that dampens a wide frequency range from infrasonic to 500 Hz and therefore effectively prevents transmission of structure-born sound. It works like an electronic "subsonic" filter, but without having their assets and drawbacks. It is solidly built and can be used for any sensitive equipment with 3 or 4 feet and even with high mass units up to 64 kg!
Read more
out of stock $148.38
Cat: 640564 Rel: 14 Feb 17
 
Set of 4 high-quality damping feet - silver
Notes: Audio components can be sensitive to mechanical vibration, which limits their high-fidelity performance. To keep it from your valuable equipment, Absorb It feet are the perfect solution. Especially designed for turntables, all disc players, tube amplifiers and other components, which might be sensitive to vibrancy and are positioned on high vibrating surfaces like glass, thin wood panels and metal. Place Absorb It underneath the original feet of each unit and transmission of vibration will be avoided. With Absorb It you can play up to 30% louder without the risk of acoustical feedback.

Typically, surfaces are excited by speakers, subwoofers or simply by low frequency emission caused by traffic of cars and trains and transformers. Almost all feet of audio devices, like turntables, amplifiers, disc players are not designed for sufficiently isolating from frequency ranges, that really matter. Absorb It consists of high-tech synthetic rubber material, that dampens a wide frequency range from infrasonic to 500 Hz and therefore effectively prevents transmission of structure-born sound. It works like an electronic "subsonic" filter, but without having their assets and drawbacks. It is solidly built and can be used for any sensitive equipment with 3 or 4 feet and even with high mass units up to 64 kg!
Read more
out of stock $148.38
Cat: 428823 Rel: 01 Jul 14
 
Anti-static stylus cleaner brush
Notes: Carbon fibre anti static stylus cleaning brush from Pro-Ject for getting dust and debris off of your stylus.



Read more
 2 in stock $10.86
Cat: 640566 Rel: 07 Mar 17
 
Cork turntable mat for enhanced sound quality & reduced static electricity
Notes: Sound tuning through platter mat replacement! The interaction between the record and the surface can be tracked very easily by the sensitivity of a good pick up cartridge.

Common felt mats give a smooth contact between record and platter but have the disadvantage of static. This means that felt mats often collect a lot of dust which can be then transferred to the record. Also, the damping ability is very limited which can be a problem with metal platters. Thick rubber mats overdamp the record and have an isolation effect which leaves static on the record - hearable noise clicks are the result.

Leather and Cork are 2 different but very interesting options to upgrade the sound quality. Resonances are damped more effectively than felt, they keep dust away and also avoid static.

Which is better largely depends on taste and the actual platter design. These mats are a very cost effective way to improve the sound and have less noise by static and dust. You can hear a difference!
Read more
 3 in stock $20.14
Cat: 640568 Rel: 15 Feb 17
 
Set of 4 high-quality damping feet made from synthetic rubber material
Notes: Audio components can be sensitive to mechanical vibration, which limits their high-fidelity performance. To keep vibration from your valuable equipment, Damp It feet are a perfect solution with maximum effect at the lowest possible price. Damp It offers similar characteristics as their superior big brother Absorb It, but without high-class aluminium casing. Designed to be placed underneath bookshelf speakers or the original feet of sensitive equipment like turntables, all disc players, tube amplifiers and other components.

Damp It prevents transmission of vibration when positioned on vibrating surfaces like glass, metal or thin wood panels. When Damp It is used for both bookshelf speakers and turntable, you can play up to 30% louder without the risk of acoustical feedback. Surfaces typically are excited by speakers, subwoofers or simply by low frequency emission caused by road traffic and transformers. Speaker cabinets and almost all feet of audio devices, like turntables, amplifiers, disc players are not designed to isolate sufficiently from frequency ranges, that really matter.

Damp It consists of high-tech synthetic rubber material, that dampens a wide frequency range from infrasonic to 500 Hz and therefore prevents transmission of structure-born sound effectively. It works like an electronic subsonic filter, but without having their assets and drawbacks. Because of its intelligent and rugged design, it can be used for all bookshelf speakers and any sensitive equipment with 3 or 4 feet and even with high mass units up to 20 kg!

Effectively prevents transmission of unwanted vibration in a cost-effective way!
Read more
out of stock $26.50
Cat: 630001 Rel: 07 Mar 17
 
Stable, height-adjustable support platform for turntables & other equipment
Notes: Ground it E is a stable and height-adjustable platform for turntables, that will reduce negative effects of potential surface vibrations significantly. The use of Ground it E is very simple: Do not place your turntable directly on surfaces such as furniture or shelves that may be vibration sensitive, but place it on Ground it equipment bases. All Ground it bases will improve the sonic performance, so a pleasant, natural reproduction of vinyl music will be possible. The playback quality of a turntable placed on Ground it E will benefit because of improved dynamics and coherent timing. The ambient acoustic of the recording venue will sound much clearer and contoured, so music playback appears to be more realistic, authentic and expressive.
Read more
out of stock $88.41
Cat: 640573 Rel: 13 Feb 17
 
Turntable mat designed to enhance the sound of your turntable
Notes: Fitting over the centre spindle and sitting comfortably on a 12" platter, the mat is designed to offer a better playback surface than other felt or cork alternatives.

The mat improves performance by reducing vibration transfer to the playing surface, allowing your cartridge to deliver a more stable high-fidelity performance. The high-friction but smooth surface also allows for fluid record rotation with minimal slip.

Due to the thickness of this mat, it may reduce the possibility of using an existing record clamp.

Available in black or grey.

Please Note: The Leather-IT in black has a matte-suede effect on both sides. The Leather-IT in silver has a shiny finish on one side, and a rough leather finish on the other.
Read more
out of stock $52.99
Cat: 640578 Rel: 15 Feb 17
 
Spirit level for optimum positioning of a turntable
Notes: Wooden spirit level, for ensuring your turntable is set on a level platform - the first key stage in proper Hi-Fi installation.
Read more
out of stock $21.20
Cat: 640580 Rel: 15 Feb 17
 
Turntable spindle oil for improved audio performance - 5ml
Notes: Formerly known as Grease-IT, this platter bearing oil is a high-tech lubricant, allowing for drastically reduced friction around the main bearing. Now your turntable can spin at a constant velocity, improving its performance.

All you need is a couple of drops, and the performance will be solid for years to come.

Volume: 5ml
Read more
out of stock $21.20
Cat: 640581 Rel: 07 Mar 17
 
Stylus measuring gauge with 4 digit LCD-display & backlight
Notes: Attractive and compact digital stylus measuring gauge; helping you allow for optimum cartridge performance and preservation of your vinyl records.
Read more
out of stock $95.39
Cat: 428824 Rel: 21 Jun 11
 
Heavy weight record clamp
Notes: The Project Platter Puck is for use on Project turntables, its 750g weight ensures a firm fit between the record and the platter surface, and it is also suitable for most other turntables with similar size spindles. This clamp is the perfect and most stylish solution to keep records flat during playback. Simply put the clamp over the spindle and tighten the top and keep warped or bowed records flat.

Some modern vinyl records are thin, flexible and often warped or bowed. As most records do not lie flat on the turntable platter, sound reproduction suffers due to un-damped vinyl resonances caused by the stylus riding on an unsupported record. Records which are bowed downwards contact the platter at the outer edge but not in middle. Conversely, records that are warped or bowed upwards tend to rock on the platter. In these instances anti-skating compensation is less effective and record wear is increased substantially by the lateral or vertical see-saw motion of the tonearm/cartridge combination.

The Project Platter Puck solves the above problems by bringing the record into more intimate contact with the platter.
Read more
out of stock $63.59
Project Strobe IT Strobe Disc (RPM calibration & cartridge alignment tool)
Cat: 640587 Rel: 07 Mar 17
 
RPM calibration & cartridge alignment tool
Notes: The useful and innovative combination of a stroboscope - AKA, a speed-checker for your turntable - and a cartridge alignment tool.

An essential accessory for any turntable enthusiast.

Strobe it shows circular arranged dashes that are assigned to speed and frequency. Please remember the ring that matches your desired speed and frequency (33 1/3 rpm with 50 Hz and 45 rpm with 50 Hz are valid for Europe). Put Strobe it on the turntable platter and start the turntable. The tonearm remains in its initial position. Align a mains-powered light source directly to the turntable with Strobe it rotating. The dashes of the previously pinned ring should now give the impression to stand still. If they seem to move slightly forward or backwards, the speed is either too high or too low.

Please note:

Use normal mains operated lamps. Daylight, fluorescent lamps (energy saving lamps) as well as flashlights and LEDs, which are operated with direct current, are not suitable.
Read more
out of stock $26.50
Cat: 721846 Rel: 20 Feb 19
 
Replacement self-adhesive strips for the VC-S vacuum arm
Notes: Self-adhesive strips.
Read more
 3 in stock $5.25
Cat: 158885 Rel: 01 Oct 04
 
Cleaning kit with 20ml cleaning fluid & brush
Notes: Essential DJ equipment from Rodec. 20ml fluid for cleaning turntable needles.
Read more
out of stock $7.68
Cat: 434234 Rel: 14 Nov 11
 
Record/spindle damping device
Notes: The SRM-Tech Revolution is a record/spindle damping device featuring an integral spirit level. It is manufactured from acrylic and sorbothane, and is designed to effectively damp the record and turntable spindle, without disturbing the balance of suspended sub-chassis turntables.

The Revolution acts in a similar way to a clamp, the sorbothane base grips the spindle and clings to the record label. Unlike a conventional clamp though, it does not exert undue pressure on the record stressing the surface of the vinyl. SRM-Tech call it a soft clamp.

The theory behind damping the record is to absorb or minimise:

1. The vibration picked up by the record acoustically, a good example of this is if you tap the label
2. The vibration transmitted to the record from the motor / main bearing
3. That generated by the stylus itself, when tracing the modulations in the groove.

The ideal is to damp the record without resorting to any method that unduly distorts the surface of the vinyl. The most elegant solution is to use The Revolution, which is preferably in conjunction with SRM-Tech silicone platter mat.

The Revolution also features a 20mm circular spirit level (in the optimum position, the centre of the platter) which will allow you to perfectly level your deck, minimising tracking error, wow and motor/bearing noise. RAM-Tech carried out extensive listening tests during the development of this product and experienced impressive sound quality improvements on every turntable. Improvements you can expect are a quieter, smoother sound with firmer, more tuneful bass. The Revolution also makes vocals more articulate and detailed, as well as reducing surface noise.

The Revolution is 80mm diameter, 22mm high and weighs 78g. It will accept spindles that project up to 11mm above the record label.
Read more
out of stock $34.96
Cat: 308768 Rel: 17 Apr 08
 
Cloth dust cover for Stanton T series turntables
Notes: The Stanton CTC-1 is a cloth turntable dust cover designed to fit all Stanton T-Series turntables and most other brands. Comes in "Stanton" blue with embroidered logo
Read more
out of stock $21.20
Cat: 187983 Rel: 04 Aug 05
 
Cleaning system combines a cleaning fluid + brush
Notes: The SC-4 stylus cleaning system combines a specially formulated cleaning fluid and unique cleaning brush with controlled penetration bristles to keep your stylus professionally cleaned.

Read more
out of stock $17.46
Cat: 568540 Rel: 25 Mar 15
 
Technics universal deck/turntable cover with gold embroidered Technics logo
Notes: High quality Technics universal deck/turntable cover with gold embroidered Technics logo.

Material: Samtex 600D PVC Backed Polyester
Dimensions: 45 x 35 x 17cm
Read more
 1 in stock $25.17
Cat: 567703 Rel: 25 Mar 15
 
Automatic tonearm lift for manual turntables, not compatible with DJ style turntables (Technics 1200, Audio Technica, Stanton etc)
Notes: The Q UP is NOT compatible with DJ style turntables like the Technics 1200, Audio Technica and Stantons. There is no space between the platter and the tonearm to mount the lifter.

Hello music on vinyl lovers. The Q UP is a high precision device that safely lifts your tonearm at the end of the record. The Q UP can be installed in minutes, without tools, and is designed to fit on most manual turntables. Based upon a trigger and lift design, now reborn and modernized to work with either classic or contemporary turntable / tonearm combinations The Q UP can be configured for a variety of tonearm heights, thicknesses and shapes. The Q UP only interacts with the tonearm at the end of record and does NOT adversely effect the tonal quality of your system in any way. No need to worry about falling asleep with your record playing or forgetting it is playing if you get distracted.
Read more
out of stock $52.94
Cat: 716980 Rel: 15 Jan 19
 
Turntable speed checker
Notes: 10cm Diameter Aluminium Version, 50/60hz, Speeds from 8-1/3rpm to 78rpm.

Enjoy your records at the correct speed, pitch & tempo.

Tonar precision stroboscope disk 10cm. With this you can check and/or adjust the correct speed of your turntable.

One side is for 50Hz and the other for 60Hz this disk has a scale for 8.33/16.66/33.33/45 & 78rpm.
Read more
 1 in stock $21.19
Cat: 716977 Rel: 16 Jan 19
 
Turntable speed checker
Notes: Deluxe stroboscopic disc - 30cm diameter. Speeds: 8 1/3, 16 2/3, 33 1/3, 45, 78 RPM.
Read more
 2 in stock $44.50
Click for better price!
quote 716977
150/80(ページ1/2)の商品
1  2  »

Filter

Turntable accessories
DJ機器
Release Date
Close