シンセサイザー

Notes: Streichfett combines the best of the now extinct species of String Synthesizers of the 70s and early 80s. Its dual sound engine features a fully polyphonic strings section and a monophonic solo section, which is essential for recreating how adult movies sounded thirty years ago. The Ensemble Effect handles lubrication of the String Section, while the Effects section adds adjustable Phaser or Reverb. Alternatively, the Effect section can be used to animate the strings registration, allowing spectacular sound morphs.

The Solo Section offset presets named Bass, E-Piano or Clavi, and just like in your typical string machine, the sound has little to do with that name. Instead, these are shimmering and slightly percussive sounds that blend well with the string section.

Although the User Interface is simple and easy to comprehend, it controls a rather complex sound engine which is capable to delivers rich and creamy pads unlike any other instrument.

Twelve patches can be stored and selected in the Memory section, USB and MIDI are of course on board.

Notes: The new PerFourMer is a real analog synthesizer, through its simple control surface and very flexible sound production it is able to offer a near inexhaustible variety of Bass, Lead, Pad and Effect sounds. Additionally, with its total of six filter inputs, the PerFourMer is also perfectly suited as a complex filter-bank. Even though the PerFourMer is not considered a modular system, it can still be described as a modular or at the very least a semi-modular. The basic concept is reminiscent of classics such as the Oberheim 4 Voice or the Korg Monopoly.

The PerFourMer is a 4 voice synthesizer, consisting of completely independent synthesizers, which can be adjusted and played independently from each other. These four synthesizer channels can be linked with each other and be played in 3 different operating modes.

Next to the already mentioned filter inputs, each channel has a single output, which can also be used as an insert for external effect devices, and make it possible to easily integrate the PerFourMer with already established equipment. It is also possible to transmit the unedited VCO signal. Additionally the opportunities of the PerFourMer can be expanded through internal patching between the channels, for example; you can route a VCO through multiple filters and VCAs, or use 2 channels to create 1 voice with 2 ADSR envelopes (1 for VCA and 1 for VCF). Use the PerFourMer as a filter-bank and the slope envelope can be doubled by interconnecting the filter in series. The PerFourMer is controlled via MIDI and additionally via CV/gate (1V/octave) inputs for every synthesizer channel.

Notes: The Korg Monotron Duo is capable of creating even stranger, extreme and diverse sounds. The combination of 2 oscillators in unison provide thick, rich analogue tones, while tuning them to different intervals can create classic solo synth sounds and powerful effects. Korg have utilized their X-Mod (cross modulation taken from their classic Mono/Poly synths) circuitry in the Monontron Duo, enabling you to generate the mildest of sounds, to vibrant vibrato, to sharp, fm style abrasive synth sounds.

The Monotron Duo features Korg's fantastic enhanced ribbon controller keyboard and now features the same scale function as used on the Kaossilator, chromatic, major, minor or off scales are available, allowing your music juices to flow freely over any music. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Duo uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

The input jack (AUX input) built into the Monotron Duo's compact body allow you to place any audio source into the Monotron Duo's signal path, directly before the analog filter. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter effects.

A miniature speaker is built into the Monotron Duo. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Duo's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

http://www.youtube.com/watch?v=wWLOxRSll5Q

Notes: A good delay was an essential part of the classic analog synthesizer sound. More often than not, that delay came from a tape-style echo machine until affordable digital delays were created. The Monotron Delay is an analog synthesizer optimized for sound effects. In addition to its analog oscillator, filter and LFO, it also provides a space delay that's indispensible for swooping, cosmic sounds. The monotron Delay even reproduces the pitch changes that occur when you vary the delay time, just as though you were using an analog tape echo. This fat and warm delay will add an authentic edge to your analog sounds.

It also features Korg's class VCF filter for full control over your sounds. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Delay uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

Create classic sounding analogue tape delays to add warms and new dimensions to your synth sounds. Also included is Korg's fantastic enhanced ribbon controller keyboard, while a mini jack input also allows you to run any external audio, such as a Kaossilator, digital piano or guitar, through the Monotron Duo. As standard, the Monotron range comes with a powerful built-in speakers and is battery operated for the ultimate portable experience.

The Low Frequency Oscillator (LFO) waveform used to modulate the pitch now offers a choice of waveshapes, which is a new square wave plus the traditional triangle wave. Both the rate (speed) and the intensity (depth) can be adjusted independently. In addition, a trimpot on the back panel can continuously adjust the shape/direction of the triangle wave or the pulse-width of the square wave to deliver even more versatility. Used in conjunction with the delay, the LFO can create dazzling effects and provide unique possibilities for embellishing your songs.

The Monotron Delay's ribbon controller keyboard features a wide, 4-octave range. This design allows the pitch to be controlled even more aggressively and dynamically, making the Monotron Delay a great weapon for a DJ to get the floor moving with irresistible sound. The reversed white keys and body adornments glows under black light illumination, making the monotron Delay ideal for delivering a striking visual impact in nearly any club environment.

The input jack (AUX input) built into the Monotron Delay's compact body allow you to place any audio source into the Monotron Delay's signal path, directly before the analog filter and delay circuit. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter and delay effect.

A miniature speaker is built into the Monotron Delay. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Delay's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

Notes: Pulse 2 Analog Synthesizer is proof positive that good things can come to those that wait. For ever since this high-quality synthesizer developer discontinued its original rack-mountable Pulse and Pulse+ programmable analogue monosynths boasting ballsy bass tones and legendary leads beyond compare, those Nineties electronic musicdominating sounds have been severely sought after by those in the know. Which was exactly what drove us into development overdrive to produce an all-new Pulse fit for the 21st Century.

As an all-new, all-analogue synthesizer design, Pulse 2 flawlessly delivers exactly what synth connoisseurs around the world have been truly craving for quite some time - three analogue oscillators living in perfect harmony with a VCF (VoltageControlled Filter), yet we did not stop there: the fresh filter circuits in the Pulse 2 now offer 12dB Highpass and Bandpass modes in addition to 24dB/12dB Lowpass for strengthened sound-sculpting flexibility, while we added analogue Filter FM, two Overdrive circuits, and Ring Modulation from OSC 3, together with Paraphonic and Unison modes allowing up to eight-voice chords - a fantastic feature found on our recently-released Rocket Synthesizer.

Pulse 2 is housed in a sturdy metal desktop casing. Alongside its generous 128x64-character backlit LCD, eight eye-catching stainless steel knobs are available to nimbly navigate through the parameter matrix - logically laid out across the front panel for all to see at all times, set the master Volume, and easily edit display-accessible parameters.

Connectivity comes well catered for courtesy of USB, MIDI In, MIDI Out, Ext In (external analogue signal input), line OUT, and headphone output - not forgetting, of course, CV Out (supporting both the V/octave and Hz/V standards) and Gate Out (V-Trigger- and S-Trigger-compatible), allowing a myriad of suitably equipped older (or newer) synths to be connected to the Pulse 2 to mirror whatever MIDI 'note' information is being played by the Pulse 2, including the output of its powerful ARP (arpeggiator). And if that's not enough to be getting on with, the CV Out can even be modulated in the eight-slot modulation Matrix, making for even more tantalising tone colours and performance possibilities!

Alongside analogue must-haves like a noise generator, Pulsewidth modulation, and hard Sync, other notable features include an Alternating Pulsewidth Modulation mode new to the Pulse 2 (offering a dense PWM sound without affecting perceived loudness), and an XOR Osc mode (that is a binary XOR combination of two PWM oscillators with two distinct output levels - high and low only - capable of producing inharmonic spectra unlike anything associated with any analogue synthesizer other than the original Pulse) - all of which, of course, contribute to kickstarting those still soughtafter sounds right here, right now in the 21st Century. Speaking of which, 500 onboard sound programs should be more than
enough to keep the most diehard synthesist smiling! What's more, all are backwards-compatible with the original Pulseseries, so original Pulse owners can quickly transfer their favourite sounds to their new Pulse 2 via MIDI (dump).

Notes: Korg's MS-20 monophonic synthesizer, first introduced in 1978, is still a coveted instrument to this day, thanks to its thick, robust sound, its powerful, iconic analog filter, and its versatile patching options. Over 300,000 people have enjoyed the distinct MS-20 sounds from the original, from Korg's MS-20 plugin synth, or the iMS-20 iPad app.

Today, the sounds of the MS-20 have been reborn in hardware, as the MS-20 Mini. The same engineers who developed the original MS-20 have perfectly reproduced its circuitry and fit into a body that's been shrunk to 86% of the original size, yet retains the distinctive look of the original.

The MS-20 mini will amaze you with its absolutely authentic analog synth sound.

The Korg MS-20 Mini features 2 improved lower noise voltage controlled oscillators with selectable waveforms including ring modulation and noise, 2 voltage controlled high and low pass filters, 2 voltage controlled amplifiers, 2 envelope generators and an LFO. Part of the appeal of the original was its self oscillating, resonant filters that could be driven into distortion. They remain popular to this day and can also be found in the recent monotron and monotribe units as well as on the new MS-20 Mini.

Part of the versatility of the original Korg MS-20 was its flexible patching system, making it semi modular, and this has been recreated for the MS-20 Mini. It allows users to create uniquely complex, evolving, organic sounds by using patch cables to access and change the internal synth architecture, with the front panel flow chart guiding easy operation straight out of the box. Users can even patch external sources via the external signal processor to be processed in the same way as an oscillator, as well as benefitting from the rich harmonics added by the circuitry and filters.

This reissue of a modern classic will be an extremely welcome addition to Korg's current synth line and, with fantastic sound, versatility and ease of use, the MS-20 Mini is sure to win over many fans old and new.

Notes: The Korg Volca Keys is an ideal introductory synthesizer, with a simple, yet powerful polyphonic analog sound engine and loop sequencer.

The Volca Keys is a long awaited synthesizer that adds a new chapter to the long and storied history of Korg's analog synthesizers. This 27 key analog lead synth delivers unbelievably powerful sound in a compact body. Starting with a filter section that uses the circuitry of the legendary miniKORG700S (1974), it delivers astonishing sound that takes full advantage of Korg's half-century of know-how in circuit design.

With a simple structure that includes delay effect and a sequencer, it's also an ideal choice for a first analog synth. It offers the richly expressive sounds that are distinctive of analog, providing the enjoyment of simple yet deep sound-creation. The possibilities are endless; you can use the three oscillators to play chords, use them in unison with detune to produce solid lead lines, or apply ring modulation to create far-out metallic sounds.

The Voicing function makes it easy to specify how the three oscillators will be combined. Choose between poly, unison, octave, fifth, unison ring or poly ring simply by turning a dial. Easy for those taking thier first steps into synthesisers, the Volca's simple design makes it easy to obtain a wide variety of sounds.

Record phrases as you play them with the Volca Keys using the loop sequencer. With up to 16 steps, it's easy to create phrases as they come to mind. Use the overdub recording function to produce complex loops, with up to 8 sequence patterns able to be stored in internal memory. Craft your loops with the motion seqence function, apply time varying changes to your sound to enhance loops and add originality to your life performances.

Skip a step during sequence playback with active step, a function that creates effects similar to a short loop or unexpectedly irregular rhythms. This allows you to create a dynamic performance just as though you were performing the sequence itself. Flux function lets you play back the phrase without quantizing the steps, producing a loop with a distinctive sense of groove.

A useful self-tuning function constantly tunes the oscillators, so you never need to tune during a performance or wait for the pitch to stabilise after turning the power on.

Connect the Volca Keys with the rest of the Volca Series or a Monotribe using the sync jack. A MIDI in connector lets you synchronise with other devices, play the Volca from any MIDI keyboard and send note messages from your DAW.

The Volca Keys analogue loop synth has a compact size and a built-in speaker, easily playable anytime, anywhere. The ideal starter-synth.

http://www.youtube.com/watch?feature=player_embedded&v=7rbcYJ326EI

Notes: The new PerFourMer is a real analog synthesizer, through its simple control surface and very flexible sound production it is able to offer a near inexhaustible variety of bass, lead, pad and effect sounds. Additionally, with its total of 6 filter inputs, the PerFourMer is also perfectly suited as a complex filter-bank. Even though the PerFourMer is not considered a modular system, it can still be described as a modular or at the very least a semi-modular. The basic concept is reminiscent of classics such as the Oberheim 4 Voice or the Korg Monopoly.

The PerFourMer is a 4 voice synthesizer, consisting of completely independent synthesizers, which can be adjusted and played independently from each other. These 4 synthesizer channels can be linked with each other and be played in 3 different operating modes.

Next to the already mentioned filter inputs, each channel has a single output, which can also be used as an insert for external effect devices, and make it possible to easily integrate the PerFourMer with already established equipment. It is also possible to transmit the unedited VCO signal. Additionally the opportunities of the PerFourMer can be expanded through internal patching between the channels, for example; you can route a VCO through multiple filters and VCAs, or use 2 channels to create 1 voice with 2 ADSR envelopes (1 for VCA and 1 for VCF). Use the PerFourMer as a filter-bank and the slope envelope can be doubled by interconnecting the filter in series. The PerFourMer is controlled via MIDI.

www.youtube.com/watch?v=UWFsfUa9pUk

Notes: The Korg Monotron Duo is capable of creating even stranger, extreme and diverse sounds. The combination of 2 oscillators in unison provide thick, rich analogue tones, while tuning them to different intervals can create classic solo synth sounds and powerful effects. Korg have utilized their X-Mod (cross modulation taken from their classic Mono/Poly synths) circuitry in the Monontron Duo, enabling you to generate the mildest of sounds, to vibrant vibrato, to sharp, fm style abrasive synth sounds.

The Monotron Duo features Korg's fantastic enhanced ribbon controller keyboard and now features the same scale function as used on the Kaossilator, chromatic, major, minor or off scales are available, allowing your music juices to flow freely over any music. The distinctive tone of an analog filter (VCF) can dramatically alter and enrich the sound. The Monotron Duo uses the same highly acclaimed VCF circuit as Korg's classic MS-10 and MS-20 semi modular synthesizers. Originally released over 30 years ago, these instruments are still coveted today for their aggressive, dynamic filters. The VCF Cutoff knob sets the frequency or tone of the filter; the VCF Peak knob adds emphasis. A powerful filter is an essential aspect of any analog synthesizer, applying dramatic tonal changes to the sound, and projecting an intense personality that will stand out in any live performance.

The input jack (AUX input) built into the Monotron Duo's compact body allow you to place any audio source into the Monotron Duo's signal path, directly before the analog filter. This provides a great way to connect a Kaossilator, a guitar, or a digital audio player to the Monotron and enjoy tone-bending filter effects.

A miniature speaker is built into the Monotron Duo. Along with the battery operation and compact size, this feature allows you to enjoy the share the Monotron Duo's analog synthesis sound with your friends, anywhere, at any time. There's also a headphone output that you can use when practicing in private, creating sounds at home, recording, or for connecting to an amplifier or PA system.

http://www.youtube.com/watch?v=wWLOxRSll5Q

Notes: The Mother-32 is a distinctive analog instrument that brings raw sound, step-sequencing and extensive interconnectivity to any electronic or modular ecosystem. This expansive live performance and production synthesizer is designed to provide experimental musicians and synthesists with a diverse array of creative tools to inspire new ideas, unique sound and endless sonic exploration.

Drive synchronized sound with Mother 32's powerful step sequencer while utilizing its modular patchbay and assignable output to spawn a living, breathing organism with dynamic and modifiable sound processing. Patch multiple control and sound sources into Mother-32's voltage controlled mixers and truly unlock the vast potential of this powerful instrument, or pull all of the patch cables, plug in a MIDI cable and simply drive your Mother-32 from any MIDI-equipped device.

The Mother-32 is secured in an extruded aluminum enclosure with wood sides, but can also easily be relocated to almost any Eurorack enclosure.

During the prototype phase, Moog worked with 3 unique synthesists: Erika (Interdimensional Transmissions), Max Ravitz (Ghostly International), and Bana Haffar to produce a video that explores Mother-32's vast capabilities. Through performance and sound design, each artist displays the extensive vocabulary found within Mother-32. All patches were performed live, with no overdubs.

Specs

Sound Engine: Analogue
Polyphony: Monophonic
Keypad: 13 Note
Step sequencer: 32-Step with 64 Sequence Locations, Keyboard and Step Edit Modes
Sequencer panel controls: Tempo, Swing, Run/Stop, Hold, and Reset
Sound sources: 1 Oscillator With Pulse and Saw Waveforms, 1 White Noise Generator, 1 External Audio Input
Oscillator range: 8Hz-8KHz (16KHz max with LFO/CV)

Notes: Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!

Notes: Killer value for money here. Korg's budget synth brings proper analogue polyphony to a crazy price point. Amazingly versatile with sound to match synths two or three times the price.

Supplier's notes:
Meet minilogue; the stylish, innovative, 37 slim-key fully programmable analog polyphonic synthesizer:
minilogue's newly developed analog synthesizer circuit delivers polyphony and full programmability at a great price --- exactly what today's musician needs. With the minilogue, you can get your hands on the powerful sound that's only possible with real analog, and find inspiration with features including a polyphonic step and motion sequencer, on board tape-style delay, multiple sound shaping and filter options, and an oscilloscope display. All of these seamlessly integrated features make minilogue as fun and easy to use as it is powerful. It's the next-generation analog synthesizer for musicians of all types.

True analog sound:
The synth circuits for minilogue are all new ground up designs, delivering a synthesizer experience like no other. Unprecedented in this class, it's a four-voice polyphonic true-analog synth with an interface that's designed for accessibility. Whether you're performing live or producing in the studio, the minilogue is the fastest way for the user to explore and implement real analog synthesis in any situation.
The structure consists of 2VCO, 1VCF, 2EG, 1VCA, and 1LFO. The minilogue's unique wave shape capability lets you fine tune the oscillators' harmonics, creating the most divine sounds and compositions. The minilogue is also equipped with a variety of powerful types of modulation including cross modulation, oscillator sync, and ring modulator, as well as a delay with a high-pass filter. Powerful sound creation and rich variety are the true hallmarks of an analog synthesizer.

Polyphony and Presets - Perfect:
minilogue goes beyond analog synths in its price range by adding 200 preset locations. Select a program for instant access to great sounds - - ranging from thick basses to deep pads to brilliant polyphonic leads and atmospheric sounds. No need to have deep synthesis knowledge; just choose a sound and tweak - a workflow that is very familiar with musicians today. For those who want to dive deeper into the heart and soul of minilogue's engine, the minilogue hold 200 programs; with 100 editable factory programs included, and 100 locations serving as blank canvases on which to create your next analog masterpiece. Each preset can also hold a step sequence and delay settings along with the sounds you create.

Voice modes:
Selectable voice modes let you freely configure the four voices for performance. The voices can be set to four note polyphony for chords or layered for thick basses and leads. Other modes cover a range of sounds from octave shifted bass explosions to delicately staggered layered triggering.

Eight voice modes:
- POLY - operates as a four-voice polyphonic synthesizer
- DUO - operates as a unison two-voice polyphonic synthesizer
- UNISON - operates as an all-unison mono synthesizer
- MONO - operates as a mono synth with sub-oscillator
- CHORD - produces chords
- DELAY - voices 2--4 sound consecutively at a delay following voice 1
- ARP - an arpeggiator operates with up to four voices
- SIDE CHAIN - when a note sounds, the volume of the preceding voice is lowered

16-step sequencer:
Get creative with the intuitive 16-step sequencer with motion sequence recording capabilities, and make your sound truly come to life. The minilogue provides real-time recording with overdubbing, and step recording that lets you record simply by consecutively specifying notes, giving you a great way to create phrases and performances.

Oscilloscope visualizes the sound:
The OLED display will show the waveform as you sculpt your sound. Visual feedback is both educational and entertaining, and represents a first on a hardware synthesizer.

Build quality:
The uniquely curved, sand-blasted 2mm aluminum front panel, metal shaft potentiometers, solid, chassis-mounted metal shaft potentiometers and rubber-coated knobs give the roadworthy minilogue a standout look and feel to complement its powerful and dynamic sound creation capabilities.

Sync with groove machine:
In addition to the standard MIDI connectors, the minilogue provides a sync connector that can be easily connected to Korg's groove machines. Connect this to a volca series unit, an electribe, or the SQ-1, and experience a session with synchronized sequencer playback.

Notes: A modern classic. Superb little semi-modular monosynth in its own right, but comes alive when paired with other modular gear. A great option for beginners and experienced synth users alike.

Supplier's notes:
The 0-COAST is a single voice patchable synthesizer. Its name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka "East Coast," and "West Coast," due to their locations), but is loyal to neither and thus implements "no coast synthesis."

While the 0-COAST utilizes classic modular synthesis techniques, it's designed to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!

Using the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you've ever known.

Notes: Arcade-themed synth from Teenage Engineering's amazing Pocket Operator range. Tiny portable synth with quirky chiptune-style sounds, built-in sequencer effects. Super fun.

Supplier's notes:
Arcade synthesizer and sequencer, with parameter locks, chord control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.

Notes: Mono Lancet '15 might be small-sized device, despite it is a bona fide analogue synthesizer.

Two oscillators and a noise generator are the foundation for its sound. Together with the musical lowpass filter and VCA it's capable of producing warm and precious sounds full of character.

Beside its audio qualities Mono Lancet '15 has a dead simple and intuitive user interface. Each parameter has its own control. We are absolutely convinced that you will quickly learn how to realize your sounds with Mono Lancet '15 without thinking about what you do.

Expandable with Modular Dock:
Mono Lancet '15's functionality can even be enhanced using the optional Modular Dock eurorack module. It offers various in- and out-connections to the individual sections of the synthesizer. With just a few additional modules you can multiply the strong sound base of Mono Lancet '15.

Mono Lancet '15 is manufactured in our Elektroakustischen Manufaktur in historical Vogtland. For us it is not only a piece of high-quality analogue technology but rather a musical instrument, handmade with love and passion.

Ships with UK 3-pin power supply.

For audio demos, please visit - http://www.vermona.com/en/products/synthesizer/product/mono-lancet-15/

Notes: Gorgeous retro-inspired synth. Heavily based on 70s string synthesisers and vocoders, updated in a modern format. Proper lush vibes.

Supplier's notes:
The string section starts with an oscillator bank using octave dividers, followed by a complex mixer, an equalizer and the ensemble effect, just like string machines from the 70's. A single registration knob sweeps through mixer and EQ settings for Violin, Viola, Cello, Brass, Organ, Choir and more for creating rich and creamy sonic textures.

The Solo section is a 16-voice synthesizer that complements the string sounds. A single Tone knob sweeps through many useful settings. Solo is the sidekick to the strings, but it is powerful enough to be the lead character every now and then.

The Vocoder replaces the equalizer in the string section with the filter bank that models the vocal tract from the speech input. This can produce quite intelligible speech or singing using the fully polyphonic oscillator bank. Formants can be modified, which can result in a perceived change of gender. Adjustable jitter of the string oscillators renders the voice hoarse, creaky or a complete whisper. Solo can pass through the Vocoder or play in parallel.

The Freeze button lets you freeze a short speech fragment, which is then repeated by the Vocoder whenever a key is pressed. Change of playback speed, like faster, backwards or a complete stop are possible and fun, as well as formant change.

A novel Tweak function allows for modification or modulation of details, like e.g. the solo cut-off frequency or the Chorus LFO rate. It is similar to a modulation matrix, but it also allows to alter implicit settings with a fixed value or an offset.

Three Effects operate simultaneously - Animate is in fact a modulation of the string or vocoder registration, while a Phaser is a must for any decent string machine. A high-quality Reverb with adjustable size can be mixed to the output.

STVC comes with a high-quality gooseneck microphone that plugs right into the front panel where it belongs.

Notes: Bass Bot is an intelligent sequencer featuring 21st century transistor technology. An analogue, monophonic synthesizer with classic step entry programming by the user or Bot computer-generated patterns. Seven unique preset personality programs, capable to generate up to 224 read only computer generated presets by the Bass Bot. An additional 224 Write Editable Patterns can compose up to 7 songs of up to 127 bars. All information is saved to on-board flash (permanent) memory and transferable directly to other Bass Bots via 8 DIN cable, (unit cloning) or to PC/MAC (backup) computers for storage with a downloadable transfer application available.

Supplied with Euro two pin to UK three pin adapter

Notes: The Quandrantid Swarm is a digital synthesizer that features a percussive element to give it a unique sound. It contains a two-pole analogue filter, an LFO with eight waveforms, and a spring reverb. The eight touch keys can be used as a mono keyboard, polyphonic keyboard or an eight-step sequencer. The Quandrantid Swarm has MIDI and CV/Trig connectivity. Its normalized pre-patching allows you start creating immediately, but its semi-modular design allows you to use patch cables to explore the potential of this instrument.

Eowave Quandrantid Swarm Features:

Triangle wave OSC with spread fold
Percussion element with frequency
Two pole filter, filter one high/low pass 12db, filter two low pass 12db
AD envelope
One LFO with eight waveforms
Slew limiter
Spring reverb
Eight touch keys with Three modes - mono, poly and sequencer
MIDI in, CV/Trig in, Clock in/Reset in to communicate with other devices
VCA

Notes: Centred around an advanced 16-track sequencer where all tracks run independently, OP-Z makes individual track speed and track length possible. In addition to this, it's possible to add unique step behaviours to every one of the 16 steps: a feature we call step components. Think of this as dual layer sequencing where the first layer is a traditional 16 step sequencer, while the second layer adds variation per cycle, note variation, micro sequencing, direction, parameter changes, re-trig's and much more, all on just one single step. In theory, it's possible to create a complete song by programming only the 1st step of the 16, using multiple step components to create endless variations, a technique recommended for experts and engineers only. Seriously, in some situations it's actually almost impossible to predict the complete length of a sequence. So, we created a special component for those situations named 'catch up', that forces a track to exit at a certain step to stay in sync. In total, there are 14 components sorted into 3 groups: triggers, note variations and specials.

All 14 components have 10 values and behaviour programs. The product of all this is that you have 140 ways to alter just one single step. Probably more than most people can handle. And to make step composing really intuitive and super-fast, all keys are backlit with multi-colour LED's with instant machine feedback, a must-have for poorly lit club gigs and late-night-in-bed composing. Actually, the print on the unit itself is made with a special glow-in-the dark-paint. A pretty cool 'world's first' for synthesizers.

Bring your own screen:

OP-Z is a completely stand-alone synthesizer and composer, ready to be used at anytime and anywhere, but for those of you who need that extra injection of vibrant graphics, interactive user interface and awesome synced animations to feel inspired, we introduce the concept of BYOS - bring your own screen. You already have the phone with that gorgeous retina display in your pocket, right? Just download the OP-Z app, pair the two devices and you are all set. Add cellular connectivity, WiFi and powerful graphics processing to that, and the concept certainly makes sense. All this tech when connected to the OP-Z adds several unique features - like using the phone's camera, snapping a series of photos and arranging them to a beat, creating a synchronised music video 'a-la-minute'.

We support Dropbox on IOS as well, so transfer of your custom artwork on to your IOS device will be instant and without cables. To eliminate any latency between image and sound, we ported the OP-Z sound engine to run simultaneously on your IOS device. Something we call 'dual domain synthesis'.

Photomatic:

Snap a series of photos and sequence them to a beat. Compose a song and create a completely synchronised music video 'a-la-minute'. The included photomatic feature is just pure instant fun.

Custom graphics:

By adding any artwork or a photo to your IOS device camera roll or to a Dropbox folder, you can create high quality custom graphics, patterns, colour palettes or stop motion videos. Anything can be animated in pace with your music.

Create your own world:

OP-Z is tailor made for unity 3D, the world's most popular multi-platform game engine. Chosen because of its intuitive workflow and excellent VR support. A dedicated OP-Z toolkit for unity will be available at launch that opens up the entire machine.

Full unity 3D integration:

Teenage engineering have worked closely with Keijiro Takahashi and the unity Tokyo studio to fully integrate OP-Z with the unity game engine. As Keijiro-san is both a full time software evangelist at unity and a renowned VJ at night, we have had access to a selection of Keijiro-san's personally developed tools and shaders which deliver stunning 3D graphics that run at full speed on iPhone or iPad. Keijiro-san's tool-set and real life experience in performances with motion graphics have been invaluable in making OP-Zan inspiring live tool for moving images in sync with music. The weakest point of VJ-ing has always been the creation of content. By exposing the inner control data of the OP-Z and linking it to unity, users can create anything within unity, build the project and just drop the build to a Dropbox folder. Customizing every single polygon in a performance.

If it don't have tape, it's not OP:

The new tape feature is probably one of the coolest sonic features of the OP-Z. Imagine a short snippet of tape secretly recording everything that is programmed in the sequencer - all in real-time. And with its own dedicated track it's possible to sequence the tape, trig the in-point, length and speed. OP-Z will come with a range of tape reels with unique character and functions. Scrub, scratch, wind-up and mess-up!

Notes: Offspring from a noble house, the little synthesizer machine with the big and evil sound.

Waldorf is back in the game. With the Blofeld.

This synthesizer offers all the unique qualities that made Waldorf a truly legendary brand.

The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their pulse, Q, Q+, micro Q, microwave, microwave II/XT, or even the flagship wave.

Notes: Sound:
Vintage Keyboard Sound Engine with six incredibly detailed vintage keyboard types.

Each keyboard type matches a carefully chosen Drive and Tremolo setting to provide an incredibly musical pairing.

The six keyboard types are:

- RdI, early '70s tine electric piano

- RdII, late '70s tine electric piano

- Wr, late '60s reed electric piano

- Clv, 70s struck string Clavinet

- Toy, toy piano

- CP, Yamaha CP80 electric grand piano

128-note polyphony ensures dropout-free performance.

Five stomp box-style effects with direct control@
The effect types are:

- Drive (adds harmonics and distortion)

- Tremolo (Auto-Pan for Rd) or VCM Wah with adjustable depth and rate

- Chorus with adjustable depth and speed

- VCM Phaser with adjustable depth and speed

- Digital or Analog-Type Delay with adjustable time and depth

- Reverb with adjustable depth

Control:
- Based on the FS action found on the flagship Motif XF, HQ (High Quality) Mini Keys provide premium feel and response for fast, accurate and natural playing

- Sustain pedal input allows the sustain function for all electric piano sounds

Mobility & Connectivity:
- Speakers

2W 3cm stereo speaker system lets you play any place, any time.

Specially designed bass reflex port technology enhances bass response for full, rich sound.

- USB

USB "TO HOST" allows MIDI connectivity to your USB-equipped computer or iOS device.

- Audio output

Dual 1/4"unbalanced line outputs provide connection to mixers, audio interfaces, DI boxes and more.

- Audio input

A 3.5mm aux line input lets you connect and hear mobile devices, tablets and more through the instrument.

Battery Operation:
- Battery powered - uses six "AA" batteries with five hours of life

Create your Soundmondo. Inspire and be inspired:
Soundmondo is a free sound sharing community that lets you discover, create and share reface Voices and Set Lists using Google Chrome any place, any time you're online.

Powered by Web MIDI, Soundmondo is simple to use - just connect reface to Chrome and you're ready to create or start browsing.

Notes: Legendary sound meets the generation of mobile musicians: With the reface Mobile Mini Keyboards, Yamaha introduces a small revolution. Based on legendary synthesizer models like the DX7 or CS series, the company presents four compact instruments, which play to their strengths on the road, on stage or even in the studio. reface is perfect for songwriters, sound designers, live performers and those looking for access to an instrument which allows them to react when inspiration strikes. The online collaboration with musicians around the globe via Yamaha's 'Soundmondo' sound community and the easy connection to notebook, Apple iPhone and iPad are making the four models ideal for being creative together. Battery power and integrated stereo-speakers make the reface quartet ready to play at all times.

From Pink Floyd to Michael Jackson to U2 - with over 40 years in synthesizer history, Yamaha influenced Rock and Pop music like no other instrument manufacturer. Legendary models and series like the CS Control Synthesizer or the DX7 are an inherent part of music history. Time for a small revolution: With the reface Mobile Mini Keyboards, Yamaha presents a range of ultra-mobile synthesizers and a stage-piano that impress with their compact design and web-based sound-exchange. They build the bridge between the sound tradition of the legendary prime fathers and the cooperative music production over the internet.

It started as a sketch of a young Yamaha design team: Under the concept name "reimagined interfaces of classic Yamaha keyboards" the group presented a series of four compact instruments, in which every single one celebrates the personality of a legendary Yamaha instrument - but with a character of its own reimagined for today's 'on-the-go life style'. The concept also integrates a web-based sound exchange between musicians and allows a cooperative sound design. With the introduction of reface, this vision becomes reality.

At home, in a studio, in a park or on a train - the compact design and the powerful integrated stereo speakers allow inspiration in seconds - without any equipment to set up. Creativity can be realised anywhere: Thanks to the battery power, all reface Mobile Mini Keyboards are ready at any time - even when there is no power socket nearby. The setup is done in seconds, even the connection to notebook, iPhone or iPad for the recording and saving of sounds.

All four reface models are presenting themselves as a creative toy for sound design. But despite their compact design, they are professional instruments that are inviting to play. All models feature Yamaha's brand new 'HQ' Mini-Action keyboard with 37 keys (3 octaves). The user interfaces were designed separately for each instrument introducing features such as drawbars for the reface YC organ and the capacitive Multi-Touch surface on the reface DX.

reface YC: Electric Combo Organ - Rich, punchy sounds are its area of expertise: The reface YC offers additive synthesis paired with a unique power of expression using nine drawbars and virtual rotary speakers. The instrument combines five different models of organs, the sound is created using a special "Organ Flutes Tone Generator". In addition to the possibility to carry around five organs in a single piece of hardware without breaking your back, the reface YC delivers the authentic spirit of playing an organ using the smallest user interface possible.

All four reface models offer a rich potential for creative sound design - and the opportunity to get in touch with the whole world: With Soundmondo, Yamaha created an online hub connecting the reface community all over the globe. Soundmondo offers creative possibilities to create, share and discover sounds. The connection is established intuitively using a special Web MIDI technology for Google Chrome. As soon as a reface model is plugged in, it offers the possibility of direct synchronisation. Voices and set lists can be stored in a private area as well as shared with the community.

Quick and easy storage as well as management of sounds with iPhone and iPad: The free reface iOS app for Apple mobile devices makes data transfer extremely simple. A name, a picture and multiple tags can be applied to stored voices; they can be sorted in different ways as well. Search functionality is also included. Using a set list, voices can be arranged in a specific order and recalled one after the other. Another impressive feature is the possibility to exchange voices using QR codes: A distinctive code can be generated from any stored voice and can then be shared using the different options available with iOS. It can for example be sent via email or read using the camera of another iPad to import it into the app.

Notes: Expanded, pro take on IK's excellent compact analogue synth. Dual-filter, three-oscillator paraphonic design with 64-step sequencer, effects and capacitive keyboard (also available with premium keybed).

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro Desktop gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro Desktop can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro Desktop offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro Desktop, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro Desktop provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro Desktop offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro Desktop offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank 4, Miroslav Philharmonik, MODO BASS, MODO DRUM, Syntronik 2, and T-RackS 5.

Dimensions:
Size (W x D x H): 25 x 14 x 5 cm, 9.84 x 5.5 x 1.96 in.
Enclosure: Plastic
Weight: 700 g, 1.54 lb
Power: USB Power

Packaging includes:
UNO Synth Pro Desktop
1x Micro USB to USB Cable

Notes: Keyboard version of IK's three-oscillator, dual-filter analogue synth. Classy purist analogue tones with some nice modern features like a step sequencer and effects. Also available in a cheaper, capacitive keyboard version.

Supplier's Notes:
Next generation analog for everyone

UNO Synth Pro gives you the power to create nearly any analog synth sound you can imagine. With its unique dual-filter, 3-oscillator paraphonic design, 256 presets, 64-step sequencer, studio-grade effects, expanded connections and much more, UNO Synth Pro breaks new ground for music makers.

Available in two form factors to suit all players' needs- stage-ready with metal housing and premium keybed; or ultra-portable, USB-powered with capacitive keyboard- UNO Synth Pro offers everyone the next generation of analog sound design in a smart format that fits any space or budget.

3 analog oscillators offer continuously variable waveshape, including pulse-width modulation. Oscillators can be hard-synced for more harmonically-complex tones, and oscillator FM (frequency modulation) lets you shape everything from bell-like sounds to screaming industrial tones. UNO Synth Pro even includes ring modulation for wobbly, sci-fi sound, and a white noise generator for a wide range of percussive sounds and epic rises.

Recreate famous synth sound sources or forge entirely new ones - UNO Synth Pro has the tools you need.

In addition to the original UNO Synth's 2-pole OTA multimode filter, UNO Synth Pro adds a new 2/4-pole SSI LP filter with self-oscillation. The dual filters can be used in series or parallel, with invertible phase, for a total of 24 possible filter combinations.

In short, the UNO Synth Pro can recreate the filter sound of the most famous classic synths as well as deliver fresh new options to the limits of your imagination.

UNO Synth Pro offers 2 full ADSR envelopes, one dedicated to the filter and the other to amplitude, with both available as sources to modulate everything from oscillator pitch and waveshape to LFO speed or even other envelope stages.

2 LFOs (low-frequency oscillators) can create classic synth vibrato, wah and tremolo as well as do more complex modulations including audio range FM.

And a 16-slot modulation matrix makes routing all these a breeze. You can quickly and easily design even the most sophisticated modulation scheme, with both internal and external sources, including MIDI controllers.

IK's experience in modeling analog studio effects is decades long. For UNO Synth Pro, you'll find a super warm and organic true-analog overdrive, plus 12 studio-quality effects in three simultaneous slots: modulation, delay and reverb. External signals can also be routed through these effects, with pre-effects filtering for maximum flexibility.

UNO Synth Pro provides an enhanced version of the original's long-lasting capacitance-sensing keys along with pitch and mod strips for enhanced expression. And it adds firm-touch rubber pads for the control sections, plus LED-backlit indicators and an LED display for key information, making it easier than ever to use UNO Synth Pro live on stage or in deep programming sessions in the studio.

UNO Synth Pro offers 256 user-editable presets, each capturing the full state of the sound engine from oscillators to effects.

An onboard 64-step sequencer offers both step and real-time recording, with automation for up to 40 parameters, letting you create incredibly intricate and evolving soundscapes. You can even write CV and gate automation.

And a 10-mode arpeggiator makes it easy to create intricate patterns and runs plus a new "chord mode" that takes advantage of UNO Synth Pro's paraphonic design.

UNO Synth Pro offers two noiseless, balanced stereo outputs as well as headphone out, for superior audio quality in any situation.

USB and 5-pin DIN MIDI In and Out make it easy to integrate with other synths, Mac/PC and mobile devices, and its assignable CV/Gate connections lets UNO Synth Pro interact effortlessly with your Eurorack or other modular system.

And now, audio input allows access to the filter and FX section for external signals, in addition to the original thru-put for daisy-chaining multiple units together without using a mixer.

Free Editor

Free UNO Synth Pro Editor for Mac/PC and iPad now available for all purchasers to download. This gives you access to all the advanced features 'under the hood' to manage presets and to easily create your own directly from your computer. Full details on the editor here: https://www.ikmultimedia.com/products/unosynthpro/?p=editor

Software Promo
All purchasers of UNO Synth Pro can now claim 2 free software downloads from IK's SE or CE product range: AmpliTube 5, SampleTank

Dimensions:
Size (W x D x H): 55 x 30 x 7 cm, 21.65 x 11.8 x 2.75 in.
Enclosure: Metal/plastic
Weight: 5.8 kg, 12.8 lb
Power: Power PSU

Package includes:
UNO Synth Pro
1x Micro USB to USB Cable
Power Supply Unit

Notes: Make Noise is proud to introduce Strega!Strega is an audio alchemical experiment. Activate! Spill the tonic into time and let time decay through the filter to hear the results.

Strega is an instrument designed in collaboration with Alessandro Cortini. Inspired by Cortini's music and sonic experimentations, Strega embodies the seen and unseen, the sign and magic, the alchemy of sound.

Strega is able to conjure audio tones, generate control signals, and process external sounds. Patch the 0-COAST or any other line level source into the Strega to unlock new sounds!

This new instrument takes the same form factor as the 0-COAST and 0-CTRL. It was designed to be controlled by the 0-CTRL or the 0-COAST's MIDI CV B outputs and is equally happy interfacing with Eurorack modules as well.

Dimensions: 5.5 x 9 x .75 inches

Weight: 1.7lbs

Power Requirement: +15VDC @1A, 2.1mm Tip Positive Connector

Notes: Cost-effective all-in-one bundle from Moog: two semi-modular instruments, mixer, cables, accessories and educational materials. Just add speakers or headphones and you're all set.

Supplier notes:
Moog Sound Studio: A complete analog synthesis studio in a box. Everything necessary to start patching today. All you need is a pair of headphones!

Ready to take the next step in your analog synthesis journey? The Moog Sound Studio has you covered. Moog Sound Studio is an all-inclusive bundle of semi-modular synthesizers and accessories created to provide users with all of the equipment, cables, accessories, and educational tools needed to enter the world of analog synthesis for the first time or to continue to explore sound in an immersive new way. All you need is your own headphones or personal speaker and you're ready to get started!

Moog's Mother-32 and DFAM synthesizers are a perfect pairing to anchor any electronic studio. Mother-32 is a versatile performance and production synthesizer with a powerful step sequencer and 64 slots of sequence memory. Its classic Moog synth voice delivers raw analog sound, deep Moog bass, and soaring synth leads, forming an excellent compliment to DFAM's rich analog rhythms and percussive patterns. Equally impressive on their own, these synths become truly magical when combined into a single system. By patching Mother-32 and DFAM together, a symbiotic sonic relationship is formed that unlocks new capabilities and empowers new ideas.

Along with a duo of semi-modular analog synthesizers, each Moog Sound Studio includes a personal stereo summing mixer with 3-way power distribution to provide flexible signal routing and power your entire system conveniently from a single power supply. Also included are a series of guided exercises, exploration games, experimental patch sheets, imaginative studio art, and more to outfit your studio and take your synthesis skills to the next level. And of course, all of the cables and accessories needed to connect everything are included as well!

Moog Sound Studio takes the magical environment and hands-on learning experience of Moog installations found at events around the world and presents them in a way that empowers you to explore synthesis with joy and confidence from the comfort of your own home or studio.

This is an exciting time to be a part of the growing synth community. The Moog Sound Studio is here to provide a meaningful electronic experience that informs, inspires, and nurtures synthesists at any point in the creative journey.

Mother-32
Mother-32 is an intuitive and expandable semi-modular synthesizer that adds raw analog sound, powerful sequencing, and extensive interconnectivity to any creative, electronic, or modular ecosystem. Mother-32 Excels at: Classic analog bass & leads and powerful step-sequencing with pattern memory.


DFAM
DFAM (Drummer From Another Mother) is a semi-modular analog percussion synthesizer that empowers an expressive hands-on approach to percussive pattern creation. DFAM Excels at: Rich electronic drum patches and organic analog sequencing that breathes.

Personal Stereo Summing Mixer and Instrument Cables
This 4-input analog summing mixer (1/4" IN, 1/8" stereo OUT) features selectable mono or stereo configurations for versatile routing options, and the built-in 3-way power distribution hub supplies power throughout your Moog Sound Studio conveniently from a single power supply. The included instrument cables come in lengths and colors to compliment the system and reduce clutter.

2-Tier Rack Kit
Conveniently stack both synthesizers and the summing mixer together as one connected system to maximize studio space and orient instruments vertically for optimal interconnectivity.

Cable Organizer and Custom Patch Cable Set
The included patch cable organizer connects to the two-tier rack or mounts directly to any wall, keeping patch cables neat and orderly for a hassle-free workflow. A custom set of patch cables has been selected in lengths, colors, and quantities to maximize system patchability.

Guided Exercises, Exploration Games, and Experimental Patch Sheets
Learning synthesis doesn't have to be intimidating! Included games and educational materials allow the player to explore at their own pace while enjoying the journey. Developed with artists who know these instruments best, these detailed and fun exercises are designed to accelerate your synthesis experience by exploring new skills to support your ongoing synthesis practice - A perfect jumping-off-point for beginners or source of inspiration for the seasoned pro.

Studio Art
All original artwork, created by Jim Stoten (M32/DFAM) and Philip Lindeman (SUBH/DFAM), has been thoughtfully designed to aid users in the exploration of new imaginative worlds. The characters, poster, and objects that accompany each Moog Sound Studio come together to transform any space into an immersive creative environment.

Notes: A unique approach to FM synthesis in this updated version of Kodamo's ludicrously powerful EssenceFM. Up to 300 voice polyphony, hugely powerful touchscreen editing and stereo effects.

Supplier notes:
The EssenceFM is a powerful and easy to use FM synthesiser, allowing you to explore the endless soundscapes offered by FM synthesis. With a super-responsive touchscreen, assignable knobs and workflow optimized for sound design, creating rich and unique sounds is easier than on any other FM synthesiser.

The EssenceFM engine allows to create ridiculously powerful sounds made of more than 6 operators. That's why it's been given 300 voices of polyphony, you get the easy-to-program 6 op FM synthesis and the ability to layer many voices to create huge, rich-souding instruments.

There are 1800 operators and 4200 envelopes running at the same time, more than you will ever need.

This synth is the result of Kodamo's efforts to create the best user interface to interact with FM synthesis. No endless menus, no weird key combinations, no complex structure to remember. Everything is displayed on screen, every element is editable by pressing on it.It requires some trial and error to find the perfect sound, and that exploration process is fun only when the interface doesn't work against you. The EssenceFM is full of small details that makes workflow better: 1024 undo/redo steps while editing, copy/paste on every element, clear navigation using 4 modes and a breadcrumb, real-time envelope level display on the operators and much more. All that makes for a powerful and enjoyable synthesiser.

What you can do with it:
Create your own FM algorithms by drag and dropping operators on the touch screen. An almost infinite number of configurations is possible
Layer up to 128 voices per patch, each consisting of 6 operators, for incredibly rich sounds
Draw your custom waveforms on the touch screen to use them as oscillators or LFOs
Thicken the sound with the built-in effects
Take advantage of its 16 part/300 voice multi-timbrality to create full songs with it
Use it to make analog-like sounds with the built-in resonant filter
Connect it to your audio recording gear and effect modules in many different ways with the four balanced stereo outputs
Explore FM synthesis in the most convenient way possible with the Undo-Redo buttons, allowing for any action to be undone
Try microtunings, layer splits, round robin, MPE, and many other advanced features.

Package Contents:

EssenceFM synthesizer (MKII version)
Printed user manual
2x 3U 19" rack mount brackets
4x screws
Universal (100-240V) AC adapter
IEC power cable
2x rubber strip

Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: Brilliantly unusual synth based on eight analogue tone generators, functioning more like an electric organ or FM synth than a conventional subtractive architecture. Unique sound.

Supplier notes:
Welcome to the world of sound of LYRA-8, the unique organismic analogue synthesizer designed by Vlad Kreimer. "Organismic" means that LYRA uses some principles that lie in the base of living organisms. The way how LYRA's modules interacting between each other and the behaviour of the instrument resembles a live conversation.

LYRA-8 is based on eight generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term "voices" instead of VCOs. Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups, with two pairs in each (1234, 5678), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice's impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-8 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of two lines of delay with cross-feedback and a special architecture that enables resonance between the two lines. Each line's delay time can be individually modulated from various sources, including external ones. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Specifications:

Max output voltage: 2 v 0-to-peak
Output connector: mono 6.3 mm TS or TRS (balanced) jack
Output resistance: 100 Ohm
EXT IN: 1 v 0-to-peak
EXT IN connector: 6.3 mm TS jack
HOLD GATE: full HOLD volume +5 V
HOLD GATE connector: 6.3 mm TS jack
CV DELAY : unipolar, range of 0 to +5 volt
CV DELAY connector: 6.3 mm TS jack
CV VOICES: unipolar, range of 0 to +5 volt
CV VOICES connector: 6.3 mm TS jack
Power supply: stabilised, +12 V, 0.2 A, centre positive
Power Consumption: 2 watt
Dimensions: 266 x 266 x 62 mm
Weight (without power supply and packaging): 2.5 kg

Notes: Another intriguing experimental offering from Soma Labs. ROaT is a digital synth inspired by 80s video games. Four oscillators combine with a sequencer to create drones, soundscapes and glitchy loops.

Supplier's Notes:
Rumble of Ancient Times (RoAT) is an 8-bit noise synthesizer and sequencer inspired by the clever programming of the early PC era when an entire video game would fit on a floppy disk. RoAT is capable of a wide variety of sounds ranging from dense noise scapes to diverse glitching rhythmic patterns. The compact and portable instrument contains many elements that can be combined into surprising musical results.

The "heart" of the synthesizer contains 4 sound oscillators, each with a tunable waveform and an individual LFO, which can modulate the tone or volume of the oscillator. The modulated signal of each oscillator is mixed with other signals using 1,536 variations of complex summing algorithms that contain FM, ring modulation, bitwise logical operations and more.

The synth contains an 8-bit resonant lowpass filter with a distinct Lo-Fi character.
The built-in sequencer can be synced to an external device and also send clock out.
RoAT is battery powered and can work up to 130 hours on one set of AAA batteries.

Rumble of Ancient Times is built on a very simple 8-bit microcontroller similar to the ones used in the "brains" of old refrigerators and other simple electronic devices. Thanks to some very clever programming, it's also able to drive a very capable synth with many features!

In stark contrast to modern consumer electronics, this synth celebrates and emphasizes what can be achieved with efficiency of code and using chips considered obsolete by industry leaders. We live in an age where text editors can be 1GB or more and simple things like checking email require the latest OS and powerful processing, despite the core tasks being no different than 15 years ago with a fraction of the computational power.

So RoAT proposes a new kind of ecological thinking with the innovative use of chips that were developed and produced decades ago, instead of turning them into millions of tons of trash. We can still use technology that the industry forced us to consider obsolete, with the added benefit here of extremely low power consumption. It's an environmentally friendlier approach than galloping in the rush of planned obsolescence that damages our planet and wastes precious resources.

Rumble of Ancient Times was designed and programmed by Kakos Nonos, a new creative mind who joined the SOMA development team. His very unique style of building electronic musical instruments combines quality craftsmanship, advanced programming and a love for medieval acoustic instruments such as gusli, wheeled lyre and bagpipes.

Specifications:

Sync out voltage: 5 V
Minimum syn in voltage: 0.2 V
Current input: 20 mA
Maximum output voltage: 5 V
Audio output:3.5 mm jack
Sync out: 3.5 mm jack
Power Supply: 4*AAA battaries
Size: 122 x 136 x 40 mm
Weight (without batteries): 145 g

Notes: Synth meets sequencer in this limited-edition Noir version of Arturia's excellent MiniBrute. Semi-modular design and extensive patch bay offer a wide variety of sound design options.

Supplier's Notes:
The MiniBrute 2S Noir Edition is a thrilling hybrid synthesizer enhanced for the modern musician. Combining raw analog power, an intuitive triple-layered step sequencer, a modular-worthy patch bay, and a stealthy black exterior, MiniBrute 2S Noir delivers the Brute Factor, and then some.

Pure synth power

A powerful standalone instrument, MiniBrute 2S Noir has massive synth potential that's intuitive, accessible, and fun to use. Whether you're a seasoned pro or new to the world of synthesis, you'll find its layout easy to understand, quick to master, and hugely inspiring. Thanks to its analog semi-modular architecture, you have hands-on control of every parameter, so you can sculpt your oscillators, sweep your filters, sync your LFOs, and control your envelopes on the fly to create a sound that's uniquely yours, bound only by your imagination.

Discover the modular world

Open up exciting new possibilities by rerouting MiniBrute 2S' signal with the modular patch bay. Better still, patch it to your existing Eurorack system and explore new connections, then sequence and shape with MiniBrute 2S' myriad of controls. With this synth at your command, your creative workspace will become a experimental sound laboratory.

Step in line

Featuring an awesomely powerful, triple layered step-sequencer, multi-mode arpeggiator, and high-quality performance pads, MiniBrute 2S Noir perfectly suits adventurous electronic musicians who want to take their creations further than ever before.

The Brute Noir Editions

Unique analog instruments, where vintage synthesis and cutting-edge technology collides in the name of creative freedom and controlled sonic chaos, decorated with stealthy black exteriors. These are the Brute Noir Editions, the darker side of analog.

Included Software:
Arturia MIDI Control Center

Notes: ZeKit is a 4 voice paraphonic microsynth, featuring a simple step sequencer, various digital waveforms, an analog VCF, VCA and two AR analog envelopes.

The instrument can be controlled using MIDI (notes & clock) and has both a sync and audio inputs. External audio sources can be mixed in or be processed through the VCF / VCA.

ZeKit is available in fully assembled version

This comes with the high quality aluminium case.

A universal power adapter is available as an option.

Please reuse any compatible 5V to 9V DC adapter you already have.

All Fred's Lab instruments are manually assembled in Germany.

ZeKit is an ultra-compact paraphonic monotimbral hybrid synth with 4 voices.

These are the detailed technical specifications of the machine.

Sound Engine
Digital part
Additive sawtooth synthesis
8 mono waveforms / 8 para waveforms
Filter tracking and glide modes
16bit / 250 kHz DAC

Analog part

12dB / Oct low & band-pass VCF
2 resonance level chill / acid
Optocoupler VCA
Analog A/D & A/R envelopes
Envelope looping and re-triggering

Sequencer

96 step sequencer, with up to 4 notes per step
External sync - MIDI clock or Sync (+ start / stop) over 3.5mm jack
16 user programmable patterns
Live pitch transposition and transition of the patterns

Controls

6 knobs - Cutoff, Attack, Decay, Accent, Release and Level
3 toggles - LP/BP, CHILL/ACID, VCF/MIX
7 switches - Wave, Options, Motifs, Sequencer controls

Connectivity

MIDI input - DIN5
Power input - 2.1mm jack 5V to 9V DC
Line / Headphones output - 6.35mm TRS jack
Clock & Sync input - 3.5mm TRS jack
Audio input - 3.5mm TRS jack

Mechanics

Dimensions: 127 x 92 x 56 mm - (w x d x h)
Weight: 315 grams
Power: 350 mW
AAA Battery holder (optional)

Notes: A true powerhouse of a synth, packaging the Quantum synth engine into a more manageable four-octave design. Five synthesis modes, powerful stereo filters, performance features and outstanding playability.

Supplier's Notes:
Waldorf Iridium has made the impossible possible. The mighty synth engine from Quantum is now available in a compact form. Tracing the footsteps of its bigger brother, Iridium features all the synthesis elements of Quantum as well in a rack-compatible format. The combination of the powerful engine, incredible flexibility and detailed sound shaping facilities creates sheer endless possibilities of sound. Yet, the comprehensive layout and easy-to-understand structure lets you design your own sounds in no time. Sporting a solid metal casing and the same high level of craftsmanship like Quantum, Iridium is now ready to take over studios and stages throughout the world.

Contributing another entry in Waldorf's rich history, Iridium joins the family as a direct descendant of the PPG Wave. Though, Iridium offers much more than its ancestor. Five different synthesis models are provided by Iridium for each of the three oscillators:

Wavetable
Waveform (Virtual Analog)
Particle (Sampling and Granular Sampling)
Resonator
Kernels

Kernel mode has been introduced with the OS 2.0 of Quantum. This huge upgrade allows one oscillator to be turned into up to six sub oscillators. These can be interlinked through FM at audio rate and arranged in user-definable constellations. Just this upgrade alone would have provided enough additional features to create a synthesizer on its own. Now, all those functions have been integrated into Iridium as well.

Up to 7000 patches can be saved in Iridium. Patches from Quantum can be loaded in Iridium and vice-versa.

Iridium features three digital filters per voice. Two in the Dual Filter section and another one in the Digital Former. Several types are available to choose from:
12 or 24dB and Lowpass/Highpass/Bandpass with optional saturation or dirtiness.
Various filter models are available including those from Waldorf Nave, Largo and PPG 3V.
The Dual Filter section can be controlled independently or together in several different link modes.

The Digital Former offers all the filter types and models from the Dual Filter plus unusual models like Comb, Drive, Bitcrusher and more in addition.

All filters retain a true stereo signal throughout the entire structure of the instrument.

Specifications
16-voice polyphony, duo-timbral
Compatible with the Waldorf Quantum synth engine

3 Oscillators
Oscillator Modes:
Wavetable
Waveform (VA)
Particle (Sampling and Granular Sampling)
Resonator
Kernels (up to 6 sub-oscillators which can be interlinked through FM at audio rate)

3 Stereo Filters per voice
True stereo path
Dual Digital Filter:
Two filters with independable modes
12/24dB LP/HP/BP in all combinations
Nave, Largo, PPG, Quantum and StateVariable models
Digital Former:
Filter models from Waldorf Nave, Largo and PPG in HP/LP/BP/Notch
Comb filter
Bitcrusher
Drive
RingMod
StateVariable mode
Analyzer displayed in Filter view
Filter curve moves when modulated (optional)
Sophisticated filter routing options with modulatable panning and levels

Modulators:
6 Envelopes
6 LFOs
Komplex Modulator (LFO/Envelope combination with user-definable shape)

Mod Matrix:
40 slots
Fast assign mode
One additional control amount per slot
Identical Sources and Destinations can be used multiple times until the matrix is full

Pads:
4x4 silicon pad matrix with RGB backlights
Pads can play notes, chords, arpeggios and sequences
Latch mode

Performance features:
Arpeggiator
Step sequencer with up to 32 steps for notes and parameters
Favourites screen for quick patch recall
Onscreen Mod Wheel, Pitch Bend and Aftertouch

Screen:
Industrial-grade highly responsive touch screen

Patches:
Over 1000 factory sounds
Capacity of 7000 patch memory slots (numbers 0000-9999 can be used)
Patches from Quantum can be loaded and vice-versa
Category filter for patch list
2GB user sample flash memory

Connections:
2x TS output
2x TS input
Headphones output with Gain control
DIN MIDI In/Out/Thru
USB MIDI
USB host for storage and MIDI devices
MicroSD slot
Kensingtonr lock

CV connections:
4 CV inputs plus Gate In, Trigger In, Clock In, Clock Out
Inputs can be used as modulation sources in the Mod Matrix

Overall:
Sturdy metal case with aluminium knobs

Dimensions: 440mm wide by 305mm depth by 85mm height (including controls)
Weight: 5.4kg
19" rack assembly parts available

Notes: Cracking value in this brutalist beauty manufactured by Bristol's Future Sound Systems. Interesting features like wave-shaping VCOs and Sallen-Key filter make it the ideal starting point for a bigger modular setup.

Supplier's Notes:
Malevolent has been designed by Paul Whittington in collaboration with Bristol based synth manufacturer Future Sound Systems who have provided the analogue circuitry, and Ben Supper who developed the control interface:

Paul has a had a long career in developing products for some of the biggest names in the industry and is now using his expertise to build instruments, bringing in talents from friends he's made during his tenure in development.

Future Sound Systems are a renowned Bristol based synthesizer manufacturer, who are responsible for some of most forward-thinking designs on the market, they specialize in modular and semi-modular synthesizers & their design prowess is very apparent in Malevolent.

Despite its diminutive size, Malevolent sounds big, aggressive and is capable of everything from soaring leads, huge bass sounds, percussive phrases, weird sound FX and more.

It's form factor, user interface and price point make it a great option for those taking their first step in the modular domain, but it's unique sound, extensive modulation capabilities and the options for integrating seamlessly with other synthesizers, makes it a great option for experienced user who's looking for something a little different.

Modular Pure Analogue Synthesiser

Pure Analogue signal path designed by Future Sound Systems
Pure VCOs

19 Outputs and 19 Inputs for 3.5mm mono jack cable patching
Normalised signal path for immediate sound Malevolence
Additional rear panel line out
Additional headphone out


2 Voltage Controlled Oscillators
Saw / Triangle / Pulse outputs plus Mix for each oscillator
1V/Oct pitch control input
Shape control / pulse width modulation input
2x Frequency Modulation inputs
Coarse / Fine tune control
Shape mod amount control
FM1 and 2 mod amount controls
Shape control
Selectable waveforms for the mix output
Individual osc level control


LFO (Low Frequency Oscillator)
Triangle / Square wave outputs
Rate control

2x Envelopes
Individual ADSR controls for each envelope
Individual gate inputs
Individual envelope outputs


Multi-mode 2 pole VCF (Voltage Controlled Filter)
Low pass / Band pass / High Pass individual inputs
2x Frequency Modulation inputs with amount controls
Filter cutoff
Filter resonance


Mixer
Noise w/level control
Aux input w/level control


VCA (Voltage Controlled Amplifier) with overdrive control
Compatible with Eurorack standard 1V/Oct gear
Monophonic and patchable allowing individual pitch control of each VCO and gate control of each envelope
USB bus-powered
MIDI In / Out
Headphone out
Line out
Analogue clock in & out


USB-MIDI to 1V/Oct CV & gate conversion
All pitch and gate control is fully analogue
Analogue clock In / Out


Multi-function Joystick control
Left / right for pitch bend
Performable portamento
Performable vibrato
This is in addition to the analogue LFO
Latching hold mode


Arpeggiator
6 arpeggiator types
Up, Down, Up/Down 1, Up/Down 2, Played & Random
Auto clock sync
Detects analogue / MIDI or USB-MIDI clock and synchronises the arpeggiator automatically
Selectable sync rates when clock detected
Rate / sync control
Latch
6 Octave range
Analogue / MIDI / USB-MIDI Clock output when arpeggiator is running


Keyboard Control
32 Velocity-sensitive mini-keys
Octave shift +/- 4 octaves
Pitch output
Velocity output
Gate output
Local Off mode for DAW use


Includes:
5 Patch cables

Power Supply (9V 600mA)
USB C lead

Getting Started Guide


Weights and Dimensions:

Product (unboxed):
490 x 250 x 80 mm
2.61 kg

Product (boxed with contents):
690 x 320 x 160 mm
3.70 kg

Notes: This is a special one. Seven-voice, four-part multitimbral analogue goodness from this boutique Argentinian brand. Stunning sound and depth, combining vintage fatness with contemporary precision.

Supplier's Notes:
The GS e7 is a subtractive synthesis polyphonic analogue synthesizer. The sound generation is carried out in a total analogue way. Each voice has two voltage controlled oscillators (VCO), a noise source, a mixer, a voltage controlled filter (VCF) and a voltage controlled amplifier (VCA). The control signals are digitally generated by a microcontroller, which is capable of processing three low frequency oscillators (LFO) and two envelopes (EG) of the ADSR type. In addition, it incorporates an effects processor with chorus and delay.

The GS e7 interface was designed to be simple and intuitive.

It also has MIDI connections, USB, balanced stereo audio outputs, headphone output and CV inputs.

*** Please note: This synthesiser comes with a US type A mains lead with UK plug adapter. ***

Specs

Polyphony: 7
Multitimbral: 4 parts
Oscillators: 2 voltage controlled analog oscillators (VCO) with sub-oscillators. Hard sync.
Oscillator Waveforms: Triangular, Saw-Tri, Sawtooth, Pulse with PWM. It is possible to mix the pulse with the other waveforms.
Filter (VCF): 24dB / Oct low pass filter (4 poles) with resonance control.
Envelopes: 2 (Attack, Decay, Sustain, Release), Velocity to Attack
LFO: 3
LFO waveforms: Triangular, Ascending ramp, Descending ramp, Square, Sample and Hold
Effects: Chorus, Delay
Presets: 512 programmes, 128 multi
Conennections: MIDI IN, MIDI OUT, MIDI Thru, USB, Pitch CV, Cutoff CV, Gain CV, Ext input, Audio Out (L/Mono, R, 1/4" TRS balanced), Headphones
Power supply: DC 12V 3A
Dimensions: 520mm x 190mm x 108mm
Dimensions (with packaging): 620mm x 290mm x 230mm
Weight: 4.6 kg (estimated)

Notes: Typically experimental stuff from Soma, the Enner is a five-voice synth with an array of filters, electro-acoustic noise options, analogue effects and huge creative potential.

Supplier's Notes:
ENNER is a very expressive sound tool that can generate bits, pads, FX, noises, clicks, glitches, but also function as a cool vocal mic with built-in analogue FX and much more! A musician with a rich imagination and who's experienced in playing ENNER can perform an entire exciting gig using just this synth.

As an instrument, ENNER is a unique analogue synthesizer with the key principle being that all signals that make sound pass through and are managed by your body. Your hands become the central part of the circuitry. Touching different contact pads with different parts of your fingers and palms with different amounts of pressure, letting signals pass through your body defines the mixing, volume, timbre, feedback and other parameters of synthesis. Human skin has much more complex electric properties than we think. The skin provides not just resistance but also some capacitive properties and even nonlinear dependence of conductivity from current, its direction and time during which the current was applied. All of this affects the sound, making you the key part of the synthesis process.

All pots of ENNER are metallic and also function as inputs or outputs. Touching a pot can change not only the parameters but also patch the audio signals.

ENNER consists of:

The array of filters with fixed frequency properties (the triangle in the centre): the stereo high pass filter (HPF), the stereo bandpass filter (high mid - BPFH), the stereo bandpass filter (low mid - BPFL), the stereo lowpass filter (LPF). Stereo means that the filters have separate inputs for left and right channels as well as separate outputs. Sliding on the filters' pads with your fingers you can create a rich stereo image where each channel may have not only individual volume properties but also timbral ones. The outputs of the filters are mixed together and connected to the main output. Also in the triangle, you have a stereo direct input (DIR) that lets you bypass the filters.

The modulated stereo delay. The input of the delay is the two pads on the top of the triangle (DLY blue). The output of the delay is mixed with filter output and connected to the main output. Also, you have delay output connected to the pads placed on the left and right sides from the top of the triangle (DLY orange) that lets you create feedback and other interesting effects. The delay has two separate lines (left and right) with individual TIME controls (BPEMR pots), common FEEDBACK and the common pot that defines the amount of self-modulation (BIZZARE). The BPEMR pots are also touch inputs for delay time modulation.

On the right side of ENNER, there is a five-voice synthesizer with individual adjustment of frequency for each voice (TUNE knobs) with the possibility to change the pitch of all voices simultaneously (PITCH knob). TUNE knobs are also the outputs of the voices, so by touching them you can patch the voices to the filter's inputs. The synthesizer has separate output pads for each voice (pads OUT 1-5), individual modulation inputs (MOD 1-5) and ring modulation outputs (the RING 12, 23, 34 numbers indicate which voices are sources for the ring modulation). Connecting MOD and OUT pads of one voice with your fingers will pitch it up. The fifth voice has an additional modulation pad MOD 5- which can shift the pitch of the fifth voice down (connect it to +12 pad or any pad that has some positive signal including the output of the fifth voice).

On the left side of ENNER, there is the second synth that has one master generator, the output of which is divided six times by two with individual outputs for each stage of division (PULSE 1-6). This synth is aimed at creating rhythmical clicks, basses and octave tones. The frequency of the master generator is defined by the TEMPO knob. The output pads &1,2,3 are logical multiplications of different PULSE outputs giving additional and more complex rhythm combinations.

ENNER is also an electro-acoustic noise instrument. It has a piezo pickup attached to the front panel that captures sound from the casing itself. There is metallic spring and you can attach rubber bands to the panel to create various acoustic sounds. The piezo mic can capture clicks and scratches you make with your fingers, and it also allows you to create filtered feedback. Not only that, it can even capture your voice singing over the panel! To get sound from the piezo you have to connect the PIEZO OUT pad with some filters or delay inputs. Applying filters and delay on the piezo out while the panel works as a mic, catching the audio signal from the speakers connected to the ENNER output lets you create very cool acoustic feedback-based effects. PIEZO GAIN adjusts the piezo sensitivity.

The bottom of the triangle (NOISE pad) is the output of static pink noise.

External in (EXT socket and EXT pad) lets you send an external audio signal to ENNER and process it through the array of filters, delay and other ENNER stuff.

All of these features make ENNER a simple yet powerful kit of sound sources and FX that give you a rich and diverse sound palette with many possible playing techniques that you can change very fast as there is no other control over the sound other than your touches.

Specs

Array of filters

Pads DIR - direct input (no filters)
Pads HPF - highpass filter in
Pads BPFH - bandpass filter high mid in
Pads BPFL - bandpass filter low mid in
Pads LPF - lowpass filter in
(L - left channel, R - right channel)

Pink noise generator

NOISE - noise output

Delay

Pads DLY(blue) - delay in
Pads DLY(orange) - delay out
(L - left channel, R - right channel)
Pots BPEMR - delay time (L and R) also time modulation inputs
The UROBOROS pot - feedback (both channels)
Pot BIZZARE - delay self-modulation

Piezo

Pad PIEZO OUT - the output
Pot PIEZO GAIN - piezo amplification (also piezo output)

The five-voice synth

Pads OUT 1-5 - outputs of the voices
Pads MOD 1-5 - modulation inputs of the voices (try to connect them with OUT)
Pads RING 12, 23, 34 - outputs of ring modulators that multiply outputs of different voices
Pad MOD 5- - an additional modulation input for the fifth voice (try to connect it with +12)
Pots TUNE 1-5 - frequency of the voices (also voices outputs)
Pot PITCH - transposing all voices at once.

Rhythm\Bass synth

Pads PULSE 1-6 - output of binary dividers
Pads &1, 2, 3 - additional outputs that are logical AND of different PULSE outputs.
Pot TEMPO - the frequency of the source generator

External

Socket EXT - external in
Pad EXT - connected to EXT socket tip

Power

+12V center + 0.2A. ENNER requires a good stabilized and filtered PSU. We recommend contemporary switching mode PSUs with a wide input range. The PSU is included.

Grounding

In order that when playing on ENNER there would be no hum from the electricity grid interferences, the device must be properly grounded! A normal grounding connection at the electric socket, which is carried through the power cord to your audio equipment to which the ENNER is connected, is sufficient.

What's in the kit:

ENNER
12V center plus PSU
Several rubber bands

Notes: Part of Sonicware's excellent Liven groovebox series, the XFM is a modern take on classic digital FM sounds, offering a choice of intuitive and quick sounds or logical and deep programming.

Supplier's Notes:
Classic FM sounds, effortlessly merged with FM FUSION.

Using the 4-track sequencer and presets, you can construct an entire song.

Three Fusion FM Engines X-LAB Engine
Merge two FM sounds with a single knob to create a completely new sound.

XFORM Engine
Transform one FM sound into another over a specific period of time.

X-LFO Engine
Continuously transform between two FM sounds using an LFO.

Over 300 Inspiring Preset Sounds
Ready-to-use presets including, leads, keyboards, strings, winds, basses, pads, chords, drums, and sound effects.

Two approaches to FM sound design

Intuitive and Quick
Merge and sculpt FM sounds with a single, intuitive, knob turn.

The X-Lab engine merges two FM sounds by smoothly blending their envelopes, modulation routing, and feedback. The X-Lab algorithm can merge sounds with radically different FM structures and overtones, all without losing the fundamental tuning of the sound. Pitch locking can also be turned off to create brilliant atonal transitions between FM sounds.

Merged sound can then be saved, recalled, and merged with additional FM sounds. This is called merging process FUSION FM.

Logical and Deep

For those who want to dive into the FM Engine, the EDIT mode and included overlay provide full access to the innovative 4-OP XFM engine.

15 knobs and 30 buttons provide quick and intuitive access to all FM parameters.

Explore FM synthesis without the conventional menu diving and head scratching.

4-Track Step Sequencer

Perfect for song production and live performance

Manage lead, bass, rhythm, and more, each on separate tracks.

Sequence up to 64 steps per pattern.

Save up to 128 patterns.

The parameter locking function allows you to record knob changes into your patterns. This automation function can be recorded live, or programmed in step by step.

Sub-divide the tempo down to 32nd notes for higher resolution sequencing.

Sequence longer notes across several steps, AKA Tied Notes.

Specifications:

Size
297mm (W) x 176mm (D) x 48mm (H)
11.7 in (W) x 6.92 in (D) x 1.89 in (H)

Weight:
790g/1.74lb.

Keyboard:
27 keys (with a hold function)

Knob:
15 physical control knobs
Optional LATCH function prevents jumps in value when knob position and parameter values do not match. LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.
One physical encoder

Audio output:
Stereo line out (stereo 3.5mm mini jack)
Headphone out (stereo 3.5mm mini jack)
Compatible with Teenage Engineering Pocket Operator2 Series SYNC OUT
Speaker

Audio in:
LINE IN (stereo 3.5mm mini-jack)
Compatible with Teenage Engineering Pocket Operator 2 Series SYNC IN

Interfaces:
MIDI IN connector (5-Pin DIN type)
MIDI OUT connector (5-Pin DIN type)
SYNC IN jack (monaural 3.5mm mini jack)
SYNC OUT jack (monaural 3.5mm mini jack)

Power supply:
9V DC output AC adapter
Current: 1A or greater
Plug Type: EIAJ3 Standard
Inner Diameter: 1.7mm
Outer Diameter: 4.75mm,
Polarity: Center +
Compatible with power supplies designed for the Korg Volca 1 .
6 AA batteries

Synth Engine:
Four FM synth engines, X-LAB, XFORM, X-LFO, and LIBRARY

Voice mode:
6-note polyphonic mode
Mono mode
Legato mode with adjustable glide time
Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-
2, Random, Play Order)

Sweep:
Sweep with adjustable speed, range, and curve

Filter
Low Pass
High Pass
Band Pass
Each track has its own filter envelope.

Effects:
Chorus
Flanger
Send Delay
Insert Delay
Bit Crusher
Reverb
Distortion
Low Pass
High Pass
Isolator

LFO:
Each track has one LFO which can affect both pitch and filter cutoff.
Adjustable LFO Shapes.
Adjustable start time delay for each LFO.

Sound memory:
512 FM sound memory slots (16 x 32 banks)

Sequencer:
4 tracks
Up to 64 steps per pattern
128 patterns
Step length can be set from 1/1 to 1/32
Enter longer notes (Tie)
Track level and pan can be set independently
FX send amount can be set independently for each track
Pattern BPM / Global BPM can be set
Step copy and paste function
Track copy and paste function
Transpose function
Real-time recording
Directly enter notes for each step when sequencer is on or off
Parameter lock function
Random playback function (Playback step size can be set)
Stutter function
Note Trigger probability can be set between 25% and 100%
Pattern chain function
Metronome and pre-count function
Swing function

MIDI:
Notes, control changes, clock input/output
IMPORT/EXPORT of user data
Firmware update via Sysex

Accessories:
FM sound editing overlay
Warranty

The AC adapter is not included.
Please use 9V DC output AC adapter (1A or higher, EIAJ3 standard inner diameter 1.7mm outer diameter 4.75mm, center +).
Compatible with power supplies designed for the Korg Volca 1.

Notes: The top dog of the Hydrasynth range, featuring a dual synth engine offering 16 voices (double the standard model) and a larger six-octave keyboard. Serious synth power with great wavetable sound.

*** New 2.0 Firmware update for all Hydrasynth models - March 2023 ***

This is a free of charge update for all current and new users of Hydrasynth. The biggest news in this update includes:
Expanded memory to 8 banks (Keyboard, Desktop, and Explorer only)
NEW modulation source: VOICE MODULATOR
OSC Bit reducer
LFO quantizer
ENV quantizer
LFO Step Advance
Global FX bypass
Increased Vibrato resolution
New Sustain pedal options including Sostenuto
More LED options
Glissando in glide options
Arp Range goes to 6 octaves
Arp Step Offset parameter
More Rand/Init shortcuts (all STEP LFO steps, Wavescan waves, Voice mod offsets)
Local On/Off saved
......And more!
This is the first major update to the Hydrasynth family in a little, which adds a tonne of new features.


Supplier's Notes:
The ASM Hydrasynth Deluxe is the new flagship Hydrasynth. Offering a dual-engine setup with a total of 16 voices plus an all new 73-note keybed featuring ASM's much sought after PolyTouchr polyphonic aftertouch functionality, clearly in a class of its own. With essentially two Hydrasynths in one instrument, KeySplit and Dual voice mode patches with 8 independent voices each are possible. You also have separate balanced stereo audio outputs for each of the two parts. The easily accessible 4 octave ribbon controller adds for truly expressive playing. The Hydrasynth Deluxe of course offers CV/GATE I/O for interfacing to modular and other voltage controlled synths. There's a ton of potential for sound creation, using ASM's WaveScan oscillators together with the Mutator waveshaping section and user configurable filters. A plethora of LFO's and Envelope's plus Insert and Master Effects makes this a dream sound creation tool and quite possibly the ultimate synthesizer and controller combo for your rig.

Tech Specs

Type: Polyphonic Wave Morphing Synthesizer
Sound Engine Type(s): Wavescan
Analog/Digital: Digital
Number of Keys: 73
Type of Keys: ASM POLYTOUCH Polyphonic Aftertouch Keyboard, On/Off Velocity-sensitive
Other Controllers: Ribbon Controller, Pitch Bend, Mod Wheel
Polyphony: 16 voices (Full/Layer/Split)
Number of Presets: 1024 Single Programs, 1280 Programs in Multi (Upper/Lower)
Number of Multis: 640 Programs
Oscillators: 3 x Wavescan oscillators (219 Waveforms), 4 x Mutator wave shapers (8 Types), Noise (7 Types)
Mutators: 8 Types (FM-Lin, WaveStack, PW-Orig, PW-Squeeze, PW-ASM, Harmonic Sweep, Hard Sync, PhazDiff)
Noise: 7 Types (White, Pink, Brown, Red, Blue, Violet, Grey)
LFO: 5 per Voice (Sine, Triangle, Saw Up, Saw Down, Square, Pulse27%, Pulse13%, S&H, Noise, Random, Step), Tempo syncable, Semitone Lock
Envelopes: 5 per voice, Tempo syncable, Variable trigger sources
Filter Types: 1 Multimode Filter (16 types) and 1 Variable LP-BP/Notch-HP filter, series or parallel routing
Filters: Filter 1 (LP Ldr12, LP Ldr24, LP Fat12, LP Fat24, LP Gate, LP MS20, HP MS20, LP 3-Ler, BP 3-Ler, HP 3-Ler, LP Stn12, BP Stn12, HP Stn12, LP 1 Pole, LP 8 Pole, Vowel), Filter 2 (LP-BP-HP, LP-Notch-HP)
Effects: 9 Insert Effects, 5 Delays, 4 Reverbs
Effects Types: Chorus, Flanger, Rotary, Phaser, Lo-Fi, Tremolo, EQ, Compressor, Distortion, Delay, Reverb
Arpeggiator: 8 types (Up, Down, Up&Down, Up/Down, Order, Random, Chord, Phrase)
Other: Mod Matrix (32 slots), Macro Controllers (8), Favorites (32), Randomizer (Patch and Module), MPE Compatibility, Warm Mode, Microtuning
Audio Outputs: 4 x 1/4" Balanced (L/Mono Upper, R Upper, L Lower, R Lower)
Headphones: 1 x 1/4", 1 x 1/8", Separate volume control
USB: 1 x Type B
MIDI I/O: In/Out/Thru
Pedal Inputs: 2 x 1/4" (expression, sustain)
Other I/O: 2 x 1/8" Inputs (Mod 1, Mod2), 5 x 1/8" Outputs (CV, Gate, Mod1, Mod2, Clock)
Power Supply: 12V DC switchable power supply
Additional: Utility shelf
Height: 3.62" / 9.2cm
Width: 44.45" / 112.9cm
Depth: 13.62" / 34.6cm
Weight: 29.33lbs / 13.3kg
MPN: HSLX

Notes: Waldorf draw on their proud history with a new wavetable synth building on the classic Microwave 1 and modern Microwave II/XT. Serious synth power from this eight-voice monster.

Supplier's Notes:
M's musical heart is an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control).

With M, Waldorf are musically returning to their roots by bringing back classic Microwave and 'modern' Microwave II tone generation as a new-generation classic hybrid wavetable synthesizer with an analogue lowpass 24 dB/Oct VCF - SSI 2144 Improved Ladder Type - with resonance and analogue saturation feature, true stereo analogue VCA with panning option, and much more to explore in a desktop-friendly form factor featuring a wide range of unique sounds. Plentiful presets - totalling 2,048 sound programs (divided into 16 banks, each with 128 sounds) - professionally programmed by world- renowned sound designers also include all of the classic Microwave sound sets, such as MW1 Factory Sound Set, MW1 Soundpool 1-5, the fat-sounding Analogue and Bassco, as well as PPG Wave 2.3 sounds cleverly converted for the original Microwave. Moreover, it also features freshly-programmed sounds utilising M's myriad new features - from true hard Sync (when working in its Modern Microwave II/XT mode) to the ARP (arpeggiator) and MIDI-syncable global LFO (Low Frequency Oscillator).

But beating at M's musical heart as an eight-voice polyphonic, four-part multitimbral WAVETABLE SYNTHESIZER - as boldly blazoned in red across its full-metal blue- coloured casing, itself hinting at its illustrious Microwave heritage - are two wavetable oscillators with independent wavetable-generating Classic Microwave 1 and Modern Microwave II/XT modes, meaning that the wavetable oscillators behave differently in both of those modes (accessible by pressing the Mode button beside the helpful high-resolution graphic display with four endless encoders for yet more hands-on control). Consequently, there is no hard Sync or ring modulation available in the Classic Microwave I mode, where 16-bit wavetables are bit-reduced to 8-bit and a 240 kHz non-anti-aliased sample rate is offered, whereas the Modern Microwave II/XT mode offers a 40 kHz sample rate with band-limited wavetables, although both oscillators - OSC 1 and OSC 2 - offer the same panel parameters.

Two LFOs are generating a periodic waveform with adjustable frequency Rate and Shape that can be used for modulation purposes, are also always at hand. However, unlike other Waldorf synthesizers, there is no modulation matrix in M. Making a conscious design decision to set up M's modulation facilities directly on the corresponding display page, to paying tribute to the 1989-vintage Microwave.

Back in the here and now, M takes performance to a whole new level, thanks to that advanced ARP with 16 preset patterns, chord mode, and an ability to synchronise to MIDI clock. Furthermore, four programmable ENVELOPES allow adventurous users to manipulate sound parameters via rate or timed modulations.

Musically making a connection to the outside world is important to any synthesizer, so M offers six (rear panel-positioned) stereo analogue outputs - arranged as MAIN OUT (L/Mono and R) and AUX OUT (A, B, C, and D), the latter of which can be used to route each of the four Multi (multitimbral) parts to different outputs, if desired; a stereo headphone output (with an associated Volume knob in addition to the topside Master Volume knob); 5-pin MIDI IN, OUT, and THRU DIN connectors, complimented by a USB 2.0 MIDI port (for computer connection to transmit and receive MIDI data); an SD Card slot (for updating M's firmware, importing/saving sound patches, and importing/saving M-specific data, such as user wavetables); and - last but not least - a Kensington compatible security lock slot.

Notes: The Super 6 Desktop is our fully-featured 12-voice polyphonic, binaural analogue-hybrid synthesizer reimagined in a compact and super-flexible package. A harmonious marriage of state of the art FPGA digital hardware oscillators and voltage controlled analogue tech. It is flexible, powerful and refined with a gorgeous analogue tone. Rich and evolving textures are easily teased from the unique super-wavetable core and can be shaped and manipulated with the binaural analogue signal path and flexible modulation.

The desktop Super 6 takes everything the Super 6 is famous for and reimagines it in a more compact and super-flexible package. It is VESA compatible for use with widely-available monitor arms/mounts, rack mountable with a 7U footprint, and comes complete with robust retractable feet for a more ergonomic experience in desktop use settings.

In Binaural mode, the Super 6 features a true stereo signal path in which the instrument's twelve voices are twinned to form six stereo 'super' voices. Consequently, the left and right channels i and each of the player's ears i are assigned their own complete synthesizer voice. Parameters for both channels of each super voice may be independently controlled, facilitating the player to create rich and unique stereo images.

The Super 6 is a love-letter to the classic analogue synthesizer, brought firmly into the present with cutting-edge technology under the hood and a no-compromise approach to sound character, build quality and interface design. The rich sound that UDO has been championed for, paired with a robust, compact and inviting form factor with smooth, solid and responsive controls throughout, it cries out to be played.

Compact, flexible and ergonomic

Offering the flexible and immediate control, gorgeous analogue sound and unrivalled build quality of the Super 6, but in a more compact package. The Super 6 Desktop is a fully-featured Super 6 analogue-hybrid 12 voice synthesizer, housed in a newly designed all-metal chassis. The Super 6 Desktop also includes ergonomic features such as VESA mount compliance, optional rack ears (7U) and robust flip up feet, as well as a huge 24-voice Super 6 polychain option.

Binaural analogue, signal path

In Binaural mode, the Super 6 features a true stereo signal path in which the instrument's twelve voices are twinned to form six stereo 'super' voices. Consequently, the left and right channels i and each of the player's ears i are assigned their own complete synthesizer voice. Parameters for both channels of each super voice may be independently controlled, facilitating the player to create rich and unique stereo images. The effect ranges from subtle to extreme stereo movement, creating an enhanced sense of spatial positioning relative to "conventional" monaural signal-chains panned at their output.

Massive modulation without menus

Enormous flexibility at the player's fingertips through simple controls and a carefully designed front-panel. Going deeper, there is an intuitive and immediate modulation system based around the performance area switches. For those who want to go further, every panel control can be targeted for modulation, all simultaneously and all with unique amounts.

Analogue voice architecture

Alongside an analogue amplifier section, the Super 6's main filter is an analogue 4-pole, 24 dB per octave, resonant low-pass filter. It is preceded by a voltage controlled high-pass filter that can either be off, fixed, or can also track the low-pass filter cutoff for band-pass operation.

True no-compromise build quality

An instrument is cherished not just for the way it sounds but for the way it feels to play. We have worked tirelessly on the physical design to foster an immediate connection with the player. There has also been no expense spared on the build quality, with a rugged metal housing and solid control elements throughout.

Notes: Heavily redesigned for version three, Twisted Electrons offer up a new take on their compact acid synth: dual oscillators, new digital filter, real-time effects and more. Great value.

Supplier's Notes:
acid8 is an 8Bit bass-line synthesizer with a revisited sound and interface.

MKIII has been rethought from the ground up. The filter has been replaced with an new all digital one, the handling has been redesigned for more immediate handling and many other real time features have been added including transposition automation, filter wobbler, stutter and vinyl spin-down effects.

The synth engine now has dual oscillators allowing fat and harmonized sounds.

acid8 MKIII offers the same features as its slimsynth uAcid8 counterpart, but with the addition of hardware MIDI and analog sync in and out connectivity and packed in a rugged metal case.

A vst plugin is available to easily take control of the synth's parameters.

FREQUENTLY ASKED QUESTIONS:

Q:How do I copy/paste a pattern?

A:Hold SLIDE and press OCT- to copy and OCT+ to paste

Q:The briefly LEDS go out when I stop the sequencer - is something wrong?

A:This is normal and occurs when the memory is updated (a few seconds after the sequencer is stopped when a change has been made).

Notes: From basslines and rave sounds to massive drones and drums - the Erica Synths Bassline DB-01 synthesizer lets you explore new territories of sound and performance techniques and go from a melody to noise and back in no time. The DB-01 packs an analogue Erica Synths signature sound engine with an advanced sequencer on top of it.

Features:
All analogue sound engine
Aggresive acidbox filter design
One knob overdrive for even more destructive sound
Transistor based sub-oscillator
Independent amplitude, filter cutoff and pitch envelopes
BBD based detune for massive swarm sound
Syncable LFO with multiple waveforms for FM and VCF modulation
Noise source
Intuitive, easy to use sequencer for up to 64 step patterns
Sequence transposing
Pattern randomization
Arpeggiator
Modulation track with VCF cutoff automation
Built in and user defined scales with micro tonal possibilities
Analogue clock in and out
CV/Gate output/input
MIDI IN and THRU - play it with a keyboard!
8 banks of 16 pattern memory
Compact, durable aluminium enclosure

Notes: Sound:
- 4-operator FM Sound Engine offers dynamic and expressive additive synthesis

- A new feature of this engine is continuously variable feedback on every operator allowing for a wide-range of sound creation

- Two programmable effects blocks with seven effect types per block:
(The effect types are: VCM Touch Wah, VCM Flanger, VCM Phaser, Chorus, Delay, Reverb and Distortion)

- Multi-touch control interface gives direct access to four simultaneous parameters

- 32 Voice memory locations allow storing and recalling favorite Voices

Control:
- Based on the FS action found on the flagship Motif XF, HQ (High Quality) Mini Keys provide premium feel and response for fast, accurate and natural playing

- Sustain pedal input allows the sustain function for all FM generated sounds

Looper:
Integrated Phrase Looper: capture song ideas or just jam.

Mobility & Connectivity:
- Speakers

2W 3cm stereo speaker system lets you play any place, any time.

Specially designed bass reflex port technology enhances bass response for full, rich sound.

- USB

USB "TO HOST" allows MIDI connectivity to your USB-equipped computer or iOS device.

- Audio output

Dual 1/4"unbalanced line outputs provide connection to mixers, audio interfaces, DI boxes and more.

- Audio input

A 3.5mm aux line input lets you connect and hear mobile devices, tablets and more through the instrument.

- Controller

Continuous controller pedal input for volume control.

Battery powered:
Uses six "AA" batteries with five hours of life.

Create your Soundmondo. Inspire and be inspired:
Soundmondo is a free sound sharing community that lets you discover, create and share reface Voices and Set Lists using Google Chrome any place, any time you're online.

Powered by Web MIDI, Soundmondo is simple to use - just connect reface to Chrome and you're ready to create or start browsing.

Notes: One of 1010music's first miniature Nanobox instruments, the Lemondrop is a granular synth in a compact format. Touchscreen interface gives full hands-on control of the four-voice sound engine.

Supplier's Notes:
Freshly Squeezed Granular Synthesis

Explore a freshly squeezed approach to granular synthesis with Nanobox | Lemondrop, a polyphonic granular mini synthesizer with intuitive touchscreen control. Four voice polyphony, two granulators and an oscillator provide a wide sonic paletteifrom lush environmental pads to rugged and glitched-out textures. Instantly morph and shape sounds with the swipe of a finger using touchscreen X/Y control. Choose from hundreds of professionally designed presets and wav files, or quickly create your own patches with deep parameter control via the 2" touchscreen. Integrate lemondrop seamlessly with your existing tabletop gearior create on-the-go thanks to a compact design that fits in the palm of your hand.

What Is Included

Nanobox | Lemondrop compact polyphonic granular synthesizer with touchscreen control
MicroSD card with presets and wav files
USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs

Includes 153 presets and 311 wave files
16 grains per oscillator for a total of 128
Sample memory per oscillator 30 seconds
Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type A/B selectable
Clock Input: 4 PPQ
MIDI support: Note On/Off, Mod Wheel, Sustain, Pitch Bend, Mono & poly Aftertouch, assignable CCs, and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.

Notes: An absolute powerhouse of a synth with 16-voice polyphony, stereo architecture and a four-part multitimbral digital sound engine. Built-in sequencers, sample playback and effects make it a true all-rounder.

Supplier's Notes:
MD900 is a polyphonic desktop synthesizer, multitimbral with 4 parts. A polyphony of up to 16 voices are shared by the 4 multi-timbral parts. All of these 4 parts have their own effect stack [Mod-Delay (flanger, chorus, vibrato), Reverb, Tube-AMP, EQ, LP-Filter, DYNAMIC (Limiter) , Stereo Delay ...].

The overall audio path is stereo. Rationally, the oscillator, mixer filter, amps and effects are all in stereo.

Four independent arpeggiator und step sequenzer assigned to each of the four synth parts. The trigger sequencer may trigger the built in transient sample player (Drum Kit .wav) or send triggers to MIDI-Out (USB-DIN or USB-MIDI)

The housing is made of aluminum with real walnut wood on the front and back.

All components are industrial grade. On the operator panel we use precision potentiometer with aluminum covered knobs.

For some parameter entries we use endless encoder without rest.

This kind of encoders feels like a potentiometer.

All of this feels very valuable and it feels great to work with.

The MD900 XVA engine is patch compatible with the M800-R2 synthesizer.

Overview Firmware OS:

The XVA-Sound Engine of the MD900 runs on top of a Linux OS with real time extensions. The overall boot time is < 30 sec.

All contents like Wavetable-, Sample-files, preset and sub-preset files are stored on the internal filesystem.

The filesystem is accessible over ethernet (USB-Lan Adapter).

Managing presets, samples, wavetables configurations & updates are possible and easy to handle.

Operation Panel:

The operation panel gives you real time control to the major voice parameters with a dedicated knob. All parameters are accessible via touch-display and the endless rotary encoders. The part (timbre) has to be selected to alter the parameter on the dependent timbre.

The module specific info display gives the necessary detailed feedback on the parameter changes.

Specifications

Dimensions: 460mm x 295mm x 65mm
Power: External 15V DC power brick 50W
Audio In : 6.3mm stereo jack
Audio Out: Left 6.3mm mono jack, right/left 6.3mm stereo jack
Headphone: 6.3mm stereo jack
MIDI DIN: 1x Midi Input, 1x Midi Output, 1x Midi through
USB 2.0: 2x Hot connect for USB/Ethernet, USB-Midi Host
Pedal SW: 1x Pedal switch input 6.3mm jack
Volume pedal: 1x Standard expression pedal
TFT Display: 5" 800x 480 Colour (24bit) capacitive touch display.
Frontpanel: 37x Potentiometer, 12x linear slider, 12x endless encoder, 30x switches, 42x Leds

Notes: Inspired by the early 80s Synton Syrinx, the SER-2020 is a semi-modular monster, featuring an excellent formant filter section, unique Touch 'N Bend Control and MPE-compatible MIDI interface.

Supplier's Notes:
The SER-2020 is a monophonic semi-modular analog synthesizer with an formant filter section, designed to use as standalone synthesizer or in combination with Eurorack modules. Inspired by the Synton Syrinx *(1) added the flexibility of an MS-20. Its filter design features a combination of a 24dB/octave VC Low Pass Filter, and two independent Resonant VC Peak Filters for precise and dynamic sound shaping. The sound is ranging from solid bass sounds to articulated formant effects. Other features on the SER-2020 are the Touch 'N Bend Control together with the MPE (MIDI Polyphonic Expression) capabilities makes the SER-2020 a special instrument which response to its player. The flexible routing makes the SER-2020 a versatile machine for sound effects.

Key Specifications:
2 VCO's (CEM3340 based)
1 Sub-Oscillator
Ring Modulator
Noise Generator
Audio Mixer
Multi-Mode Sync & Sync D-Tune
3 VCF's (CEM3350 based)
2 ADSR's
2 LFO's with Reset & Shaper Modes
Auto-Glide
Multiple Triggering
Touch 'N Bend Pad
Bend Assign
Sample and Hold
Semi Modular Setup - CV inputs and outputs
Signal and Headphone output.
MIDI interface
USB MIDI interface
MPE compatible - Sensitive for; Strike (note-on velocity), Press (aftertouch), Glide (pitch bend), Slide (brightness) and Lift (note-of velocity).

The SER-2020 consist of two VCO's and one sub-oscillator, driven by VCO 1. Both VCO's deliver a triangle, sawtooth, square wave and pulse signal, which can be selected. A rich spectrum can be obtained with Pulse Width Modulation of VCO 1 and VCO 2. The LFO 1 and 2 signals can be feed to the pulse width modulation section introducing phase shift effects and Doppler frequency shifts. Since the both VCO's have a separate LFO for PWM, chorus-like effects can be obtained by controlling both pulses with different LFO speeds. VCO 2 can be synchronized to VCO 1 in different modes. Synchronization is applied when two or more VCO's have to produce exactly the same pitches, without phase shift or beat effects. When VCO 2 is detuned from VCO 1 another effect occurs, which will result in quite dramatic tone colors.
Each VCO has an individual output, also the noise generator and sub-oscillator has individual outputs.

The most important sections of this synthesizer is the filter. The SER-2020 features a very extensive filtering system, which consists of the standard 24 dB/octave low pass filter and two independent band pass filters, which together form the Voltage Controlled Formant filter.
Both band pass filters have a frequency control and a resonance control for setting the selective amplification in the pass band. The bandpass filters are equipped with a control voltage mixer for LFO, ADSR and key range voltages. The LFO control can be used for the external modulation input.
The low pass filter is an standard 24 dB/octave roll-off. It has a frequency control and a modulated CV mixer from several sources like LFO, ADSR and the key range. The LFO control can be used for the external modulation input. Also the resonance of the low pass filter can be controlled.

The SER-2020 has two ADSR generators, of which one is used to control the internal VCA, and the other one to control the filter section. The control signal can be inverted by means of the ADSR controls in the filter section, so that the filters can be swept in opposite directions.
ADSR 1 and 2 have a positive and negative (inverted) direct output available on the patch panel.

The SER-2020 has two independent Low Frequency Oscillators (LFO's) of which the rate can be controlled, and for LFO 2 also the wave shape.

LFO 1 generates a triangle wave which exclusively is routed to the pulse width modulation control input of VCO2. LFO 1 also generates a square wave and a pulse wave. The square wave is available as direct output on the patch panel. The pulse wave of LFO 1 is internally routed to the sample and hold generator as clock source.

LFO 2 is more versatile and can be used for the modulation of the VCO's and the filters. Moreover LFO 2 can be used as a one shot generator which means that a signal is generated much alike an Attack/Release generated function. Except for the LFO 2 rate control with the preset knob, it also can be controlled dynamically with the pad.

Several sections in the synthesizer can be controlled with the bend pad, by pressing it with the left hand index and middle finger. The pressure sensitivity for the VCO, VCF and VCA can be adjusted. The touch 'N bend pad also reacts on the MIDI modulation control and the MIDI brightness (CC#74) control for MPE compatibility.
Also the speed of the rise/decay mode of the LFO 2 is possible. Pressing the UP pad will result in a shorter cycle, and pressing the DN pad in a longer cycle.

Notes: Tracing the footsteps of its bigger brother, Iridium features all the synthesis elements of Quantum as well in a rack-compatible format. The combination of the powerful engine, incredible flexibility and detailed sound shaping facilities creates sheer endless possibilities of sound. Yet, the comprehensive layout and easy-to-understand structure lets you design your own sounds in no time. Sporting a solid metal casing and the same high level of craftsmanship like Quantum, Iridium is now ready to take over studios and stages throughout the world.

Contributing another entry in Waldorf's rich history, Iridium joins the family as a direct descendant of the PPG Wave. Though, Iridium offers much more than its ancestor. Five different synthesis models are provided by Iridium for each of the three oscillators:

Wavetable
Waveform (Virtual Analog)
Particle (Sampling and Granular Sampling)
Resonator
Kernels

Kernel mode has been introduced with the OS 2.0 of Quantum. This huge upgrade allows one oscillator to be turned into up to six sub oscillators. These can be interlinked through FM at audio rate and arranged in user-definable constellations. Just this upgrade alone would have provided enough additional features to create a synthesizer on its own. Now, all those functions have been integrated into Iridium as well.

Up to 7000 patches can be saved in Iridium. Patches from Quantum can be loaded in Iridium and vice-versa.

Iridium features three digital filters per voice. Two in the Dual Filter section and another one in the Digital Former. Several types are available to choose from:

12 or 24dB and Lowpass/Highpass/Bandpass with optional saturation or dirtiness.
Various filter models are available including those from Waldorf Nave, Largo and PPG 3V.
The Dual Filter section can be controlled independently or together in several different link modes.
The Digital Former offers all the filter types and models from the Dual Filter plus unusual models like Comb, Drive, Bitcrusher and more in addition.

All filters retain a true stereo signal throughout the entire structure of the instrument.

Up and down, back and forth
6 Envelopes, 6 LFOs and many more are just waiting for being used as sources in the 40 slots of the Modulation Matrix. Each slot has one additional control amount. Modulations can be directed to almost every numerical value in Iridium. All sources and destinations can be used as many times as desired until the Modulation Matrix is full. If you ever happen to run out of LFOs or Envelopes, you can use the Komplex Modulator for generating a custom shape LFO or Envelope.

Even though Iridium features a staggering amount of parameters to control, everything is organized in a logic structure which is easy to master. The major controls have their own dedicated knob, while the rest is accessible through the touch screen and the encoders around. There are no long menus keeping you from doing what you had planned. Instead, you will find a workflow which you will soon miss on other synthesizers.

Embedded in the front panel, a 4x4 silicon pad matrix invites you to launch notes, chords, arpeggios and sequences with up to 32 steps for notes and multiple parameter lines. Direct access to the parameters is granted by the seven encoders to the left and the right hand side of the touch screen.

Iridium's large color touch screen keeps you informed at all times. Upon moving a knob, Iridium gives you an optical feedback of your changes in real-time. Filter curves move, Particle grain sizes change, Envelopes warp and much more:

Komplex Modulator curves can be drawn with your finger
Envelopes show at which point the voices currently are
Wavetables are displayed in comprehensive view modes
VU meters show which voices are used and the individual voice levels
Different Analyzers show the audio signal at different points

Two Audio Outputs allow you to listen to Iridium, while two Inputs allow Iridium to process external signals. 4 CV inputs plus Gate In and Trigger In are ready to forward external signals to the Mod Matrix. Furthermore, Clock In and Clock Out will get your gear in sync. MIDI connections can be made through USB and DIN MIDI. Iridium is also equipped with a USB Host port for MIDI devices. This port also handles data exchange, in addition to the MicroSD card slot.

Once again, Waldorf have underlined their status with a new and exciting synthesizer.

Notes: Welcome to the world of sound of LYRA-8, the unique organismic analogue synthesizer designed by Vlad Kreimer. "Organismic" means that LYRA uses some principles that lie in the base of living organisms. The way how LYRA's modules interacting between each other and the behaviour of the instrument resembles a live conversation.

LYRA-8 is based on eight generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term "voices" instead of "VCOs". Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups, with two pairs in each (1234, 5678), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice's impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-8 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of two lines of delay with cross-feedback and a special architecture that enables resonance between the two lines. Each line's delay time can be individually modulated from various sources, including external ones. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Notes: THE PIPE is a voice / breath / mouth-controlled dynamic FX processor and synthesiser.

It turns your voice into a powerful FX / beat / lead / soundscape synthesizer and it offers unprecedented levels of vocal processing, truly expanding the traditional boundaries of singing. Conventional singing with lyrics is also possible, and you can use the FX to add live modulations to your vocal performance.

Also, you can use the PIPE as a powerful FX processor for an external signal as a synth, drum machine etc.

THE PIPE has 12 different algorithms: ORPHEUS, FILTERRA, SYNTH, REVERB, MADELAY, PULSE, BASSDRUM (three versions), OCTAVA, GENERATOR, HARCHO!

The PIPE consists of the handheld part and a small break-out box with L R output jacks (1/4-inch) and DC IN for power. The handheld part and break-out box are connected by a single cable that contains both output channels and DC power.

The handheld part consists of the contact vocal mic (connected by a standard 1/4-inch jack), electronic components and the controls. You can easily attach a cable extension to the mic which opens up many more options. Attach it to a stand, or put it inside of or on the surface of acoustic instruments such as drums, guitars, trumpets etc. Also, you can use the mic in jack as external in and use the PIPE to process any signals you want.

Notes: ETHER is a wide-band receiver that makes it possible to perceive the electromagnetic landscape around you.

ETHER is a kind of anti-radio. Instead of being tuned to a specific radio station, it receives all the interference and radiation that a traditional radio tries to eliminate in order to create a clean signal. It captures the radio waves as is from hertz to gigahertz because it doesn't contain the tuned input circuit that filters out all frequencies except the narrow band of a specific station. This allows ETHER to perceive the invisible electromagnetic landscape that humans created unintentionally, making possible live electromagnetic field listening and recording.

The design was inspired by the design for the very first radios (early 1900s) that had no tuning wheel. At this time there weren't many radio stations, and all of them used Morse code. It was possible to distinguish each transmitter by ear, as each one had its own specific timbre or voice.

ETHER is pocket-sized (103x58x17mm) and light-weight (73g with batteries). It consumes very little power and runs on two AAA batteries. How long it can run on two batteries is unclear,- but the battery life is more than 300 hours if you using alkaline or lithium batteries.

ETHER was intended to be a unique accessory for the conscious modern human. Special designed enclosures made in Europe were used, as well as high-quality PCB and furniture providing long life and high reliability. So with ETHER, you get both a unique sound experience and a cool-looking high-quality gizmo.

ETHER has both magnetic and electric components for sensing radiation. For the magnetic component, it has a built-in magnetic antenna, like the ones used in old long-wave radios. The antenna has maximum sensitivity on ETHER's axis. By changing the orientation, angle and position of ETHER, you will change the sound. For the electric component, it has antennas printed on the PCB and the special input pins placed on the anterior surface.

ETHER V2 has two external antenna pins. You can touch any conductive material or surface (including your body) with the pins and use objects or yourself as a big external antenna! Two pins are connected to different points of the circuit and interact differently with electromagnetic waves. Switching from one to another or using them both, you can change the sound. Far away from a city, we recommend trying to use a piece of wire 1-4 meters long connected to one of the pins for getting some interesting sound.

ETHER V2 has two wheels for sound control and the power switch. The upper wheel adjusts the amount of high-frequency amplification and regeneration. The lower wheel is the volume. By adjusting high-frequency gain you can focus ETHER on different dynamical levels of surround interferences getting the richest and interesting sound.

ETHER is not just an inductive sniffer like some projects you can easily find online. A simple low-frequency inductive sniffer will be silent in most places that are full of sounds in the video. Such devices need to be placed close to an emitting source and will not work on a street. All they contain is a coil and a low-frequency amplifier. In comparison, ETHER has a regenerative circuit and a demodulator, making it an actual radio wave receiver, not just an amplifier of low-frequency magnetic fields. However, ETHER can perceive the low-frequency magnetic fields as well. But, honestly, if your goal is to scan objects in close proximity (0-20 centimeters), a simple inductive sniffer will work cleaner and more focused due to its narrow band and lower sensitivity. ETHER was designed to be a part of your walks in the city and may even pick up sounds in a forest or at the seashore. Also, ETHER can perceive the electric component of the radiation as well, capturing radiation that is far above the audio range and is much more sensitive. Therefore, it has a significantly different design, functions and implementation than a simple inductive sniffer even if in some cases their functions can overlap.

ETHER is very sensitive to any kind of digital circuitry that's in close proximity, hence the lack of an SD-card recorder or something like that inside. You also have to make sure to keep other electronic devices that you carry (phone, laptop, recorder) at least 30cm/1ft away to avoid interference, but ETHER definitely works well when you walk around with a smartphone and laptop.