安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

View:
Options
150/626(ページ1/13)の商品
1  2  3  ...  11  12  13  »
Cat: 596644 Rel: 18 Dec 15
 
Physical modelling synthesis Eurorack synth module - 14HP wide
Notes: Rings brings physical modelling synthesis to your Eurorack system, from a more modular angle than Braids' models or Elements. Instead of trying to be a complete instrument, Rings focuses on the key ingredient, the resonator, ready to be excited by envelope clicks, trigger pulses, granular noise or any other audio source produced by the rest of your system.

Three families of vibrating structures are simulated by the module, with CV control over their parameters:

- Strings, membranes and tubes as modelled by Elements' resonator section (modal synthesis).
- Strings coupled together and vibrating in sympathy, with controllable intervals between them.
- Strings with a variable amount of inharmonicity.

Rings can be configured so that each new note is played on its own virtual string, while the previously played note(s) still decay(s). This unique take on polyphony allows the module to play strummed chords.

*For audio demo, please visit - http://mutable-instruments.net/modules/rings
Read more
 2 in stock $261.11
Cat: 616166 Rel: 09 Jun 16
 
Quad VCA & mixer synth module - 12HP wide
Notes: VCAs are the cornerstones of modular patches: shaping the amplitude or timbre of a tone with an envelope, animating a mixture of several oscillators, controlling the amount of filter modulation with a random source or a touch controller, applying an envelope on the linear FM signal hitting an oscillator... are all possible uses of these super versatile building blocks. That's why you never have enough of them.

What about four more?
Veils provides four VCAs with an adjustable response curve. Veils' outputs are daisy-chained, allowing adjacent groups of 2, 3, or all 4 channels, to be mixed together.
Read more
 6 in stock $154.10
Cat: 569591 Rel: 10 Apr 15
 
Multiples and mixing utilities synth module, 4HP size
Notes: Links provides 3 utility functions focused on signal distribution and mixing.

1:3 is a 3-output buffered multiple, with an offset error < 0.1%. It is useful for distributing the voltage from a CV output with a large protection resistor to several modules - particularly VCOs.

2:2 is a 2-input summer with unity gains. The sum of the two input channels is distributed to 2 outputs.

3:1 is a 3-input mixer with a gain of 1/3 for each channel (averager). It is particularly suitable for rapidly mixing audio sources such as oscillators, for which a unity gain mixer would have caused clipping.

A 2-color output monitoring LED is available for each of these functions.
Read more
 More than 10 in stock $56.71
Cat: 557488 Rel: 19 Dec 14
 
Analog computer synth module designed for musical purposes
Notes: MATHS is an analog computer designed for musical purposes. Amongst other things, it will allow you to:

- Generate a variety of linear, logarithmic, or exponential triggered or continuous functions
- Integrate an incoming signal
- With no signal applied, generate a variety of linear, logarithmic, or exponential functions
- Add, subtract and OR up to 4 signals
- Generate analog signals from digital information (Gate / Clock)
- Generate digital information (Gate / Clock) from analog signals
- Delay digital (Gate / Clock) information
Read more
 More than 10 in stock $286.79
Cat: 638949 Rel: 31 Jul 17
 
Experimental sampler module - record, slice & rearrange audio material
Notes: The Morphagene is a next generation tape and microsound music module that uses Reels, Splices and Genes to create new sounds from those that already exist. Search between the notes to find the unfound sounds.

A few of the Morphagene's most basic uses: Splice recorded audio and jumble it using ORGANIZE. Manipulate playback speed and direction with Vari-Speed. Granularize with Gene-Size and Slide. Layer or Stagger Genes using MORPH. Undertake iterative music processes by recording manipulations and overdubs into new Splices, like having two machines (one for Playback and modulations, one for Record). Process sound in real time using Time Lag Accumulation. Utilize envelope following CV OUT and EOSG Trigger to engage Morphagene in conversation with the rest of your modular system. Stretch and squash sound with Clock input.

Width: 20hp
Max Depth: 30mm
Power: 165mA @ +12V, 20mA @ -12V

***MG137 Firmware Update:

Change Log

1. Improves Vari-Speed response for slow modulation rates.

2. Improves SD Card file format for more compatibility with software .wav file formats.

3. Doubles total record time per Reel.

Upgraded memory performance offers an increase from 1.45 minutes to 2.9 minutes of record time.

If you are using Splices that are over 1 minute long the SLIDE parameter will be scanning across a massive amount of material and therefore the longer the Splice the longer it will take to get to where you are Sliding toward. Imagine a tape machine shuttling forward or backward to get to your desired destination. No we cannot change this, the MG is scanning as fast as possible. This new double record time firmware will make this even more of a factor.

Read and Write times will be MUCH longer when you have a Full 2.9 minute reel. So for example, if you decided to erase a 5 second Splice in the middle of a 2.9 minute reel it will take twice as long as before because the MG must re-write the entire 2.9 minute reel. Of course all of this is happening in the background and should not cause too much hassle. Still when that SHIFT button is flashing it is best to not perform more SD Card actions.

For most granular processing Splices of 10 seconds or less are recommended.

So why even bother increasing record time to 2.9 minutes? Well it allows for storing even more Splices on a Reel and it also makes it possible to record long portions of a patch for later arranging within your DAW. You could potentially capture a patch, including modulations of a shorter Splice (say 10 seconds), retrieve the sound from the SD Card and compile into a larger work using your DAW.

4. Increased max number of Splices to 300.
Read more
 4 in stock $510.47
Cat: 648928 Rel: 25 May 17
 
Compact programmable clocked modulation source in Eurorack format - 8HP
Notes: 'Pamela's NEW Workout' is a compact programmable clocked modulation source for your Eurorack modular synthesiser system. It provides 8 highly editable outputs producing various control voltage signals correlated and synced to a BPM based master clock.

Building on the original 'Pamela's Workout', this new evolved model maintains the original's form factor and intuitive workflow but greatly improves on and adds many new features with upgraded hardware, a new OLED display and rewritten software.

Each output is now able to provide not just clocked triggers but also rhythmic waveforms with many parameters controllable directly and via assigning to external CV control. Pamela has grown beyond a clever clock and now provides almost limitless synced modulation possibilities.

Improvements have been made to overall clock stability and integration with external clocks and devices. Also new are dedicated MIDI and Din Sync clock outputs available via optional expander modules.
Read more
$233.30 SAVE 10%
 More than 10 in stock $209.97
Cat: 595826 Rel: 19 Jan 16
 
4HP power supply module for Eurorack format systems
Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.

uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.

The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.
Read more
 7 in stock $87.75
Cat: 621354 Rel: 28 Nov 16
 
Quadruple Low Frequency Oscillator (LFO) synth module in Eurorack format - 10HP wide
Notes: Batumi is a fully voltage controlled, quadruple digital LFO module with a slew of interesting and user-customizable features. Each oscillator can be used independently or in one of 3 synchronized modes: quadrature, phase and divide. For each oscillator, there are sine, square and assignable (saw, ramp, triangle and trapezoid) waveform otputs available. Voltage control is possible for each oscillator's frequency, reset, and external sync ("tap tempo"). The total frequency range spans from 28 hours in voltage controlled divide mode, up to 500 Hz.
Read more
 8 in stock $251.48
Cat: 569573 Rel: 23 Sep 15
 
Liquid filter Eurorack synth module
Notes: Ripples delivers a classic, big-sounding analog four-pole filter in a small 8-HP package, continuing Mutable Instruments' lineage of warm and tasty filters started by the Shruthi SMR4 mkII and 4-Pole Mission.

3 filter modes are available: 2-pole band-pass, 2-pole low-pass, and 4-pole low-pass.

Self-oscillation is available for all modes and produces a clean sine-wave on the LP4 output. Unlike many classic 4-pole designs, this filter does not suffer from "loudness drop" when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of the Roland SH/Jupiter filters, with a very round and "liquid" resonance.

The 4-pole low-pass output is additionally sent to a VCA. This makes Ripples a good "final stage" module for an inexpensive/space-constrained subtractive synthesis synth voice.

*For audio samples, please visit - http://mutable-instruments.net/modules/ripples
Read more
 3 in stock $152.47
Cat: 681306 Rel: 24 Jul 18
 
Multi-algorithm macro oscillator - 12HP
Notes: Plaits is the spiritual successor of Mutable Instruments' best-selling voltage-controlled sound source, Braids. Not just an MKII version: its hardware and software have been redesigned from scratch.

Just like its predecessor, it offers direct access to a large palette of easily tweakable raw sonic material, covering the whole gamut of synthesis techniques.

Simplicity first:

Gone are the screen, menu system, hidden settings, and the long list of somewhat redundant synthesis models.

Thanks to additional CV inputs, and to the use of three timbre-shaping parameters per model, Plaits is straightforward to use, and much closer to the ideal of one synthesis technique = one model. What were fragmented islands of sound in Braids are now part of a continuum of sounds.

Ready for percussion:

Patch a trigger generator or sequencer into Plaits' trigger input and instantly use the module as a percussive source thanks to its built-in virtual low-pass gate (LPG).

An internal D (decay) envelope generator is normalled to all unpatched CV inputs. Just turn the corresponding attenuverter to add pitch, timbre or morphing modulation. And if plucks and snappy hits are not your thing, patch your own envelope or CV source into the LPG CV input.
Read more
 More than 10 in stock $186.21
Cat: 593673 Rel: 13 Nov 15
 
Meta modulator synthy module designed to blend and combine two audio signals - 10HP wide
Notes: Evolved from the oscillator mixing section of Mutable Instruments' desktop hybrid synths, Warps is designed to blend and combine two audio signals. A variety of wave-shaping and cross-modulation methods - some of them emulating classic analog circuits, some of them purely digital - are provided by the module.

With Warps, the cross-modulated sound can be sculpted with control voltages along 4 dimensions: by controlling the amplitude and distorting the input signals, by smoothly scanning through the collection of modulation algorithms, and by adjusting a timbre parameter controlling the brightness/harshness of the modulated signal.

Since many classic cross-modulation effects work best when the carrier is a simple waveform - for example, a sine wave for ring-modulation or a buzzing waveform for vocoding - Warps includes a digital oscillator offering a handful of classic waveforms. This internal oscillator, which tracks V/Oct and supports through-zero FM, will replace the carrier audio input - freeing up one oscillator in your system for other duties!
Read more
 2 in stock $201.18
Cat: 557456 Rel: 19 Dec 14
 
Reverb synth module with size ranges from "coffin" to "the heavens"
Notes: The Erbe-Verb is more than a collection of reverb algorithms or presets, it is a unique, modeless, continuously variable reverb algorithm with complete voltage control.

Typical reverb types such as plate, room, hall, shimmer and others may be programmed by adjusting the knobs. The continuously variable algorithm allows for hybrid and unreal spaces to be found.

Traveling between spaces is possible by modulating the algorithm or manually sweeping parameters. More than an end-of-chain effects unit, it's a whole new building block for modular synthesis. Like the Echophon, it's coded by Tom Erbe of soundhack.
Read more
 5 in stock $436.63
Cat: 569556 Rel: 03 Mar 16
 
Topographic drum sequencer module - 16HP wide
Notes: Take the user interface of an euclidean sequencer, a healthy dose of machine learning and graph algorithms, megabytes of drum loops, hours of intensive computations and you've got a drum pattern generator like no other.

Grids' "brain" is a map of the typical drum patterns used in (mostly electronic) music, laid out by similarity, trained on a large corpus of drum loops. The module can smoothly interpolate and navigate from one pattern to the other, at the whim of a knob move or a CV.

But Grids' knowledge of drum patterns goes far beyond what would be achieved with presets - given a position in the map, thousands of variations can be intuitively generated by controlling the "event density" of each of the 3 channels (bd, sd, hh) - gradually moving from a sparse backbone to a deliciously rich pattern with ghost notes, rolls and fills.

Add CV-control on these parameters and you can add subtle or drastic variations to the drum pattern. If you don't want to waste a noise source or S&H for that, Grids has its own internal source of randomness that can unpredictably spice the pattern, in an always meaningful way.

Building the rhythmic foundation of your tracks with Grids is fun, surprisingly intuitive, with modulation and variations possibilities that will rapidly make you forget x0x-style sequencers.

*For audio demos, please visit - http://mutable-instruments.net/modules/grids
Read more
 4 in stock $152.47
Tiptop Audio Happy Ending Kit (black) (modular synth starter kit)
Cat: 590437 Rel: 10 Nov 15
 
Modular starter kit containing rails, rack ears and power supply
Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
Read more
 7 in stock $141.26
Cat: 557510 Rel: 19 Dec 14
 
Controller/analog sequencer module that is played by hand
Notes: Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.
Read more
 3 in stock $196.91
Cat: 557453 Rel: 19 Dec 14
 
Compact voltage controlled oscillator (VCO) module specifically designed for generating SINE waves
Notes: A compact Voltage Controlled Oscillator designed for generating SINE waves, Variable wave-SHAPEs, SUB-Octaves, Oscillator SYNC and Linear FM in the analog domain.

The Sub-Timbral Oscillator is the more subtle and melodic friend to the DPO's complex harmonic lattice.
Read more
 6 in stock $187.27
Cat: 569586 Rel: 30 Jun 15
 
MIDI interface and MIDI event processor Eurorack synth module with 4 CV outputs and 4 trigger/gate outputs - 12HP size
Notes: Yarns is a MIDI interface providing up to 4 channels of CV/Gate conversion, and providing some of the MIDI message processing features of Mutable Instruments' MIDIpal, including arpeggiator, euclidean sequencer, and a SH-101 inspired step sequencer.

Yarns provides 4 CV outputs and 4 Gate/trigger outputs, which can be assigned to up to 4 voices. In single voice mode, note, velocity, modulation and aftertouch (or other CC) CV are produced, along with a gate, a trigger, and a clock/reset output. In two voices mode, two channel of note, modulation or aftertouch CV are produced, along with two gates, and clock/reset outputs. Finally, in four voices mode, four pairs of CV/Gate outputs are provided.

The 2 and 4-voice modes are available both in a "polyphonic" and "multitimbral" flavour. The former receives chords from one single MIDI channel and dispatches them to the voices; while the later provides independent monophonic parts - which can be addressed to different MIDI channels, keyboard ranges, or even velocity levels. Various note priority modes (low, high, last) and polyphonic allocation schemes (voice-stealing, random, cyclic) allows you to fine-tune the CV/Gate conversion to your playing style. Each voice has a built-in digital LFO to interpret modulation wheel messages as a vibrato; can respond to pitch-bend messages; or can be smoothed with a glide/portamento control - no need for a dedicated module and patches to get the right response from a MIDI keyboard!

Each part can generate sequences either through an arpeggiator/euclidean sequencer combo; or with a SH-101 style sequencer with step-by-step recording, storing up to 64 notes. The module can sync to an external MIDI clock, and generate a clock/reset output at any subdivisions of the MIDI clock.

Other unique features include support for microtunings (either through standard MIDI messages or from a selection of historical tunings or indian ragas), just intonation, and an audio output mode which can transform one, two, or four of the CV outputs into simple digital oscillators.
Read more
 3 in stock $267.53
Cat: 557451 Rel: 19 Dec 14
 
Random voltage generator synth module
Notes: The "WoggleBug" is a random voltage generator, originally designed by Grant Richter of Wiard Synthesizers. It is a continuation of the "smooth" and "stepped" fluctuating random voltage sources pioneered by Don Buchla within the Model 265 "Source of Uncertainty," expanding it to include the other-worldly Woggle CVs (stepped voltages with decaying sinusoids edges).

The Wogglebug is a very musical random voltage generator where it is possible to synchronize all random signal to a Master Clock. Guaranteed to unleash your synthesizer's ID MONSTER!
Read more
 4 in stock $237.58
Cat: 563579 Rel: 10 Mar 15
 
Dual slider based ADSR envelope synth module, 14HP wide
Notes: The circuit is based in part on the Roland SH-101 / System100m design with several enhancements.
Read more
 4 in stock $211.89
Cat: 569592 Rel: 10 Apr 15
 
Mixer, offset, attenuverter synth module with 3 channels of audio/CV processing, 6HP size
Notes: Shades provides 3 channels of audio/CV processing which can be configured either as active attenuators or as attenuverters.

A bicolor LED monitors the polarity and intensity of the audio or CV signal on each output.

Unconnected inputs are normalized to an internal precision voltage reference, which can produce either a +5V or +10V constant voltage.

Normalization on the outputs allows the module to be used as a mixer or offset generator: when no jack is inserted in an output, the signal from this output is summed into the next output. Combined with the internal voltage reference, this allows the module to be used as a CV offset control.

Patch examples:

Mixing:
When output 1 is left unconnected, the signal on output 2 is the sum of channels 1 and 2. Channel 3 can be used for another purpose (attenuation, attenuversion, or constant CV generation).

When output 1 and 2 are left unconnected, the signal on output 3 is the sum of channels 1, 2 and 3.

Offset generation:
Leave channel 1's input and output unconnected, and connect a CV source to channel 2's input. Channel 2's output will contain a scaled and offset copy of the input CV. Channel 1's level knob will control the offset and channel 2's level knob will control the signal scale and polarity.
Read more
 4 in stock $88.82
Cat: 580353 Rel: 04 Sep 15
 
Multi-Voice, Multi-Algorithm synthesiser module - 14HP wide
Notes: The tELHARMONIC is a Multi-Voice, Multi-Algorithm synthesizer module named for the music hall considered by some to be the location of the first electronic music concerts. It was coded by Tom Erbe with the goal of presenting three historically important pioneering electronic tone generation techniques less often implemented within the modular synthesizer.

The tELHARMONIC's roots go back further than the advent of electronic music, as it also takes a new approach to handling music theory in the modular context. TONIC, INTERVAL, DEGREE and D-GATE, allow for patch-programming of complex chord progressions, scales, melodies and playing styles. This Voltage Controlled Music Theory guides the Algorithms in a unified way, whereas CENTROID, FLUX and H-LOCK sculpt the timbre of each Algorithm uniquely, allowing for complex sounds to be created around a unified melodic structure and pattern.

***FIND THE SPIRATONE INSIDE YOUR TELHARMONIC***

Spiratone:
The Spiratone is a form of Shepard Tone generator. It is a sonic barber pole that creates the auditory illusion of a tone that continually ascends or descends in pitch, yet ultimately seems to get no higher or lower.

It occupies the same space as the tELHARMONIC. To find it, have nothing patched to D-Gate and HOLD H-LOCK for 5 seconds. The sound will dramatically change... you've found the Spiratone inside your tELHARMONIC.
Multi Voice Shepard Tone generator inspired by Jean-Claude Risset "Computer Suite from Little Boy: Fall," 1968 & James Tenney "For Ann (rising)," 1969

CENTROID sets spacing of the oscillators

INTERVAL allows for complete control of modulation depth and direction

FLUX adds random pitch fluctuations

8 octaves of continuous 1V/ Octave pitch control

8 octaves of quantized pitch control

DEGREE Modulation able to be synchronized by clock or gate via D-Gate input

Gate Out completes the conversation between Spiratone and rest of system!

Utilizes High performance DSP hardware with 24bit, 48kHz codec, 32 bit floating point processing

Reasonable power consumption

Pairs well with Optomix

Video demo - https://www.youtube.com/watch?t=1&v=Mz6n-tzX5Xk
Read more
 3 in stock $329.61
Cat: 589504 Rel: 02 Nov 16
 
Advanced audio processor synthesiser module for creative synthesis - 20HP wide
Notes: Announcing the Dual Looping Delay from 4ms Company, designed by Gary Hall!

The 4ms Dual Looping Delay (or DLD) is an advanced audio processor for creative synthesis. Not a tape or analog emulation but a modern crystal-clear digital delay, the DLD combines features of delay, looping, and sample-tight synchronization for powerful and dynamic sound capture and modification. The DLD is designed to integrate seamlessly with modular time-base and sequencing devices such as the 4ms Quad Clock Distributor (QCD), etc.

What is a "Looping Delay"?
Modern looping devices grew directly from hardware digital delays of the late 70s and early 80s. A looping delay, modelled on units such as the classic Lexicon PCM42, has the very long storage times associated with dedicated looping, but without triggered record and playback functions.

By default, a looping delay records and plays continuously, though recording can be suspended at any time with Infinite Repeat. Sustain of delays and loops is mainly accomplished with regeneration, allowing an organic, evolving approach to sound creation as new material replaces old, more or less gradually. The 4ms Dual Looping Delay also provides advanced clock input and output facilities that allow for locking delayed and looped material with sequencers and rhythm devices of all descriptions.

The 4ms Dual Looping Delay is conceived and designed by Gary Hall. Implemented and manufactured by 4ms Company
Read more
 4 in stock $378.84
Cat: 633368 Rel: 28 Nov 16
 
All-analogue voltage controlled filter module - Eurorack compatible
Notes: Belgrad is an all-analogue voltage controlled filter module which - on par with our other modules - brings something new to the table. While it can be used as a traditional VCF for "academic" subtractive synthesis, we guarantee countless hours of exciting timbral explorations thanks to its unique character, flexibility, and features. The most prominent feature is that it offers a multitude of frequency responses with two resonant peaks.

- Eurorack synth compatible
- 14HP, skiff friendly
- Current draw: +45mA / -42mA
- Reverse power protection
Read more
 3 in stock $288.95
Cat: 557504 Rel: 19 Dec 14
 
Output interfacing synth module with the added functionalities of FX Loop
Notes: Rosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system.

It is designed to facilitate live performance on the modular synthesizer by allowing the artist to preview and modify portions of a patch using the Auto-CUE system, while the audience is listening to a different portion of the patch as selected by the crossfader.

Additionally it allows for Stereo processing of all sounds via the FX Loop. The Rosie is suitable for headphone monitoring of the modular system and interfacing the modular system to a recording environment. Internal Level Matching and Limiting w/ overload indication makes it easy to connect the modular system in the studio or on stage.
Read more
 2 in stock $136.98
2hp
Cat: 649102 Rel: 11 May 17
 
Stereo reverb Eurorack module
Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.
Read more
 1 in stock $97.39
Cat: 606495 Rel: 24 Mar 16
 
utility synth module with three analog functions for altering the shape of audio or control signals - 4HP wide
 3 in stock $94.71
2hp
Cat: 635860 Rel: 30 Dec 16
 
4 channel mixer module
Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.
Read more
 2 in stock $90.95
Cat: 557508 Rel: 19 Dec 14
 
Multiple signal sending module
Notes: The Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner aka logic OR circuit).

It has 9 inter-connected sockets that may be split into different group combinations depending upon how it is patched. The jacks circled in white will make or break the interconnects between the 3 groups of three, thus allowing for three 3-way, one 5-way/ one 3-way or one 7-way multiple.

The Multiple is passive, because the Make Noise system does not require Buffered Multiples since all critical control signals are already buffered in such a way as to provide a large fan-out capability.
Read more
 3 in stock $36.38
Cat: 569524 Rel: 30 Jun 15
 
Modal synthesis voice module comprising a noisy and impulsive excitation signal generator, and 64-partial modal resonator
Notes: Elements is a full-blown synthesis voice based on modal synthesis - an under-appreciated flavour of physical modelling synthesis with a strange and abstract feel.

Elements combines an exciter synthesis section generating raw, noisy sounds characteristic of bowing (filtered friction noise), blowing (pitch-controlled granular noise), or striking (stick, mallet, hammer or brush sample playback... or bursts of synthetic impulsions). These sources, or external audio signals, are processed by a modal filter bank - an ensemble of 64 tuned band-pass filters simulating the response of various resonant structures (plates, strings, tubes...) with adjustable brightness and damping. A stereo ambience reverberator adds depth and presence to the sound.

All parameters have a very meaningful and well-delimited impact on the sound. When designing Elements, great care has been taken in selecting parameter ranges and control curves, producing a large palette of sounds - often beyond physical realism - but always well controlled and stable. The "dark spots" of noise and feedback are reached gradually, and they do still react to controls. The module is deliberately menu- and switch-free - what you dial/patch is what you hear!

*For audio demos, please visit - http://mutable-instruments.net/modules/elements/demos
Read more
 3 in stock $425.93
Cat: 641102 Rel: 27 Feb 17
 
24bit, 96k 4HP mono sample player
Notes: ONE brings organic sound and super low latency sample playback to the modular. It differs from other sample players in that it handles the digital audio bits as a continuously manipulated electrical flow, a feature inspired by our analog knowhow. This unique core makes ONE truly integral within the Tiptop percussive modular ecosystem thanks to a lightweight and responsive digital circuit with a very analog feel.

ONE brings a world of colours to the modular right out of the package. We have invited some of the best sound designers in the Industry to create professional sound libraries with content tailored to the unique sonic framework of the modular synthesizer and that fully takes advantage of ONE's unique qualities. To start with, ONE comes with a SD card loaded with a free set of 60 sounds designed by Glitchmachines. More cards are available to purchase separately each containing carefully selected material with up to 256 sound files. Using your own sample libraries or recordings is easy too, just copy 16 or 24bit mono WAV files onto the SD card, pop the card into ONE and go.

ONE offers several modes of operation, with the primary being the super low latency Trigger mode that retrieves audio data off the SD card adding no artificial processing such as click removal, crossfading, EQ or gain normalization. In this mode, it's a highly transparent player up to 24 bit 96kHz with no interpolation of the audio data: what you put in is what you get out. With a delay as low as 0.25ms from the moment the trigger hits, ONE offers harmonically dense, clear and detailed audio with a great rhythmic feel.

ONE handles external CV through a user selectable multifunction jack. Pitch is the main control with two modes available: Free pitch allows for fine tuning of the playback rate, great for adding subtle vibrato or wild tape speed effects; Quantized pitch maps CV to the standard 12 tone system over 3.5 octaves and is ideal for melodic content. CV can also be used to sequence through files off the SD card allowing far more varied sounds from a single source; almost like an entire percussion section behind the slim panel.

Although originally designed to play tightly with our analog drums and envelopes, ONE's rich sound quality encouraged us to make it work in a variety of other applications that are less demanding of sub millisecond timing response. The extra headroom at the core level allows features such as Gated playback, Looping, and Triggering with fades in and out to accommodate different types of sound sources from drum loops to polysynth chords to noise sources and other yet unimagined uses.

ONE offers another useful dimension since it can play CV signals too. Drop in a card with LFO signals, random CV, slopes and envelopes for a whole set of new control and modulation possibilities.

ONE is as simple to use as it is affordable and plays extremely well with its analog cousins - our vision for bringing samples into the modular world.
Read more
 3 in stock $156.24
Cat: 601493 Rel: 22 Apr 16
 
Eight output, modular control panel - 14HP wide
Notes: Highly configurable Control, Modulation, Triggering and Pattern module. 8 simultaneous Outputs and 12, individually assignable, Output types.

Output and Modulation types include Pulses, Gates, LFOs, Digital Noise, Loopable S&H modes and a collection of Arpeggios and Rhythmic Loops.

Tempo-sync for all Outputs is provided by the on-board Clock or
an External Clock Input with Tempo ranges from 20 to 270 BPM.

Outputs can be set to any Clock Division or Multiple from 1/16th
of a Beat to 16 Bars and can be Offset up to 360 Degrees.

Intuitive interface allows user-definable control over knob and parameter behavior to match the preferences of individual users.

For audio, please visit: http://www.abstractdata.biz/products/eurorack/3x/ade32/?tab=audio
Read more
 3 in stock $318.91
Cat: 589505 Rel: 10 Dec 15
 
Innovative resonant filter synthesiser module - 26HP
Notes: The Spectral Multiband Resonator from 4ms Company is an innovative resonant filter which can process audio like a classic filter bank, ring like a marimba when plucked/struck, vocode, re-mix tracks, harmonize, output spectral data, quantize audio to scales, and much more...
A gorgeous ring of colored lights displays the frequency of each filter, as well as the levels and current scale selection(s).

At a glance, the SMR works like a normal six-band graphic EQ: six frequency band-pass filters are mixed together using sliders. Resonance/Q is variable, which changes the "ringy-ness" or width of the bands.

But here's where comparison stops. The frequency of each channel is treated like a note in a scale, and the six bands form a chord. Spin the Rotate knob and the "notes" circle around the scale, rotating back to the bottom once they've reached the top. Adjust Spread and the distance (interval) between each note changes. Triggers for up/down motion, CV inputs for sequencing and scale selection allow for flexible control with external modules. Morph, which automatically cross-fades between frequencies, together with variable Slew allows rhythmic clocks drive the SMR as a variable-speed evolving resonant filter.

At maximum Resonance/Q, the SMR can be struck like a gong or marimba by inputting clocks or triggers. The frequency of each channel is quantized to a scale: beautiful chords, ethereal tones and eerie ambiance flows easily. With lower resonance, the SMR can pull out particular frequency bands, and sweep these across the spectrum.

Two 1V/octave Frequency jacks allow for tracking even and/or odd bands and creating floating melodies over evolving chord bases, or complex percussive membrane sounds.

Save your settings into one of six storage banks, and recall on the fly. On startup, the SMR instantly jumps to the last saved settings. The color scheme of the lights can be adjusted, so if you prefer all white lights on your modular, you can have that (or all red, or rainbows, pastels, etc..)!

Advanced features:
- Program your own scale. The frequency of each of the 20 notes can be assigned by setting the octave, the semi-tone, and coarse and fine micro-tone. Up to 11 scales can be saved permanently in the user bank
- Adjust color scheme of the LEDs. Pick a pre-programmed color scheme or create your own using the sliders to set Red/Green/Blue values. Custom color schemes can be saved permanently
- Save your settings in one of six parameter banks. Note position, scale and bank selection, Q value, Lock settings and color scheme can be saved and recalled on the fly. On startup, the SMR loads settings from the last saved bank.
- Optional alternative filter type for a more exponential decay when plucked and different timbral qualities. Freq jacks no longer track 1V/oct in this mode.
- Slider LEDs can be assigned to display level for each channel (combination of slider position and CV on the jack), or clipping for each channel.
Read more
 3 in stock $446.26
Cat: 557490 Rel: 19 Dec 14
 
Synth module to be used for ring modulation, VCA, mixer, signal multiplication, voltage controlled polarization, attenuation and more
Notes: The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.
Read more
 2 in stock $133.76
Cat: 563544 Rel: 10 Mar 15
 
Dual oscillator subtractive synth voice module, 40HP wide
Notes: The Atlantis is heavily inspired by the architecture and sound of the classic Roland SH-101. It has always been one of our favorite synths and we really liked how the seemingly limited architecture allowed for all sorts of creative and musically useful sounds to be easily generated.

Just like the 101 it is quick to dial in beautifully rich bass and lead sounds. However this module uses triangle core VCOs (based on the Dixie core) instead of Saw core which respond much more musically to FM. The modulation oscillator can be used as an LFO or VCO (audio rate) and both track very precisely over 8 or more octaves.

In the mixer section you can adjust the balance of the primary oscillators waveforms including a sinewave which is normalled to the EXT IN jack. You could also patch in one of the modulation oscillators waveforms into this channel and be able to operate the Atlantis as a proper two oscillator synth. There is a switch labelled "LINK" which enables the modulation vco pitch to be based as an offset of the primary VCO. This is useful when using it as a stacked dual vco or when you have the mod VCO acting as the linear FM source for the primary vco and wish to maintain the ratio.

The filter section is a Roland style cascaded 4 pole multimode filter with LP, BP and HP modes. The LP Boost switch engages a special mode useful for the LP that produces a much fatter and prominent sound that is not drowned out by resonance (unlike the original SH-101). The filter self-oscillates to produce a very clean sine wave which also tracks 1V/Oct. Between the Mod VCO, Primary VCO, Sub Oscillator and resonating filter it is possible to layer up to four different pitches at one time.

The envelope section is an ADSR with a dual range switch. It also can be set to a looping mode which can be gated on/off externally.

The output VCA feeds into a two level output clipping circuit that you can use to get a much ballsier/dirtier sound.
Read more
 1 in stock $651.73
Cat: 563566 Rel: 10 Mar 15
 
Dual complex morphable wavetable VCO eurorack synth module
Notes: Cylonix and Intellijel have collaborated to bring you a very sophisticated and deeply complex Wavetable VCO. At the core of this module is very powerful FPGA board that he has pushed to the absolute max of its capabilities and crammed full of features. We wanted to create a module that really worked well in the modular context so there are a lot of modulation and control possibilities.

CHORDS
Oscillator 1 can be operated in a CHORD mode, which runs 8 copies of the oscillator in parallel with adjustable detuning, leading to very fat, rich waveforms. The oscillators have extensive modulation capabilities including audio rate (98KHz) Frequency and Phase Modulation (FM and PM) via external sources. Nonlinear combination processes allow the outputs of the two oscillators to interact to generate complex timbres and sonic textures.
There are 64 user selectable chords.

WAVEFOLDER
The SHAPESHIFTER module also includes the analog wave folder circuitry from
module to add analog warmth and metallic rasps to the digital oscillator output.
External signals can also be patched in.

PRESETS
The module includes a sophisticated preset mode where panel settings can be stored. There are 12 user-programmable preset slots and another 52 volatile slots that can be used as a scratchpad. These scratchpad slots are initialized to interesting presets on module powerup. The capabilities of the preset mode is not limited to mere passive storage of settings, however. In this mode the user can also step through, or sequence, the settings, either in order or randomly in response to pulses input to the external sync input. This gives the user the ability to generate complex sequences of sounds. The preset mode also allows the user to morph between the current panel settings and a preset providing a very powerful real-time performance tool.

SYNC
8 Different sync modes: HARD, SOFT, REV, HOLD, BUMP, 2=1, 1=2, OFF
with the ability to internally sync to a sub oscillator

PULSE
User selectable modes for the PULSE output: OR, AND, XOR, GLCH, +OSC1, EOC, +OSC2, -OSC2

MOD A modes: (audio rate modulation)
COMBO IN, SHAPE IN, PHASEMOD, VOCODER

MOD B options (all with CV control)

-Combo modes for OSC1 and OSC2:
NORMAL, RING, MIN, PONG, INLV, AND, XOR, GLCH
-Waveform TILT
-Chord mode overdrive
-Delay depth and FB
-Percussive mode decay time
Read more
 6 in stock $522.24
Cat: 621355 Rel: 28 Nov 16
 
Breakout expander for the Batumi quadruple LFO module
Notes: Poti is a simple but very useful breakout expander for the Batumi quadruple LFO module by Xaoc Devices. Its panel provides an immediate access to the Batumi functions originally selected by the cluster of jumpers on the back of the module: Reset/Sync mode option and selection of the assignable waveform.
Read more
 3 in stock $43.88
Cat: 616167 Rel: 09 Jun 16
 
4 channel coltage controller signal polarizer synth module - 12HP wide
Notes: Blinds is a 4-channel voltage-controlled signal polarizer. Each channel consists of a polarizer circuit, also known as a four-quadrant multiplier. This circuit acts like a VCA, except that a negative control voltage will cause the output signal to be inverted, instead of being silenced. Blinds' outputs are daisy-chained, allowing adjacent groups of 2, 3, or all 4 channels, to be mixed together.

One can think of Blinds' as a voltage-controlled version of Shades, the control center for all the modulation CVs used in a patch. Many other uses are possible, though. For example, each individual channel can be used to scale/offset a CV; and with audio rate modulation signals, each channel acts like a ring-modulator, with massive potential for drones and feedback patches.
Read more
 4 in stock $154.10
Cat: 561577 Rel: 15 Sep 15
 
Wavetable module with 21st century advanced wavetable engine with classic Waldorf wavetables included - 32HP
Notes: nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 3 in stock $180.86
Cat: 557458 Rel: 19 Dec 14
 
Dual voltage controlled oscillator (VCO) for generating complex waveforms
Notes: A dual Voltage Controlled Oscillator designed for generating complex waveforms.

Expanding on the classic arrangement of Primary and Modulator Oscillators, the DPO has both of the VCOs operable as complex signal sources. It is in essence a Dual Primary Oscillator.
Read more
 2 in stock $565.04
Cat: 643387 Rel: 21 Aug 17
 
Physical modelling percussion synthesiser module - 12HP
Notes: Plonk uses a technique known as physical modelling to synthesize, with great realism, the way in which sound is produced by acoustic instruments. The Plonk module is, itself, focused primarily on creating percussive sounds - both pitched and un-pitched; natural and unnatural; acoustic-sounding or totally electronic.

Plonk does this by breaking sound creation into two distinct elements - the exciter and the resonator. The exciter is a mathematical model of the device used to strike a particular surface. Plonk, because it's percussion oriented, has two types of exciters: one modelled on a mallet, and the other providing a noise source. The resonator is a virtualization of the object being struck, which vibrates, resonates and creates the body of a sound. Plonk offers several types of resonators: beam; marimba; drumhead; membrane; plate; and string.

Plonk provides numerous parameters that let you shape, mould and design both the exciter and the resonator, thus enabling you to synthesize the sound of striking or scraping almost any type of object - real or imagined. In this way, Plonk can accurately model the sounds of kicks, snares, toms, cymbals, claps, tablas, congas and all manner of traditional percussion instruments. It can also model pitched percussive instruments, like vibes, marimbas, and even bass or guitar-like tones. Of course, it additionally excels at modelling instruments that heretofore never existed.

Best of all, the sounds created by Plonk are not static - any sound you design can respond dynamically to velocity, as well as four different modulation inputs. This means the sound of Plonk can change completely from note-to-note (or strike-to-strike). Because of this, Plonk is actually a duophonic (2-voice) module, which lets the sound of one note decay naturally when a second note (possibly employing an entirely different set of modelling values) is struck. Thus, hitting a new note does not choke the sound of the previously struck note (unless you want it to, of course)!

Plonk stores up to 128 patches in its internal memory, and ships with many presets programmed by professional sound designers and composers. You may overwrite these patches if you wish, and banks of patches may be transferred via MIDI System Exclusive over Plonk's built-in mini-USB port to facilitate offline storage by programs or websites that support this capability.

Plonk was developed in cooperation with Montreal-based Applied Acoustics Systems - physical modelling pioneers, and the creators of Tassman, Lounge Lizard, String Studio, Ultra Analog, Chromaphone and numerous other plugins. It is with great pleasure that Intellijel brings the potential of this physical modelling technology to a hands-on, CV-laden device capable of the sort of dynamic control and sonic exploration that modular synthesists demand.
Read more
 4 in stock $333.89
2hp
Cat: 638773 Rel: 21 Feb 17
 
Dual linear VCA module with CV input attenuator & DC-coupled inputs
Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.
Read more
 4 in stock $79.19
Cat: 686269 Rel: 27 Apr 18
 
Universal, patch-programmable modulation source - 14HP
Notes: ASR envelope, complex 6-stage envelope, LFO, 4-step sequence or switched LFO: Stages can be any kind of modulation.

Not because all these behaviours have been pre-programmed in the module, but because it allows you to describe your own modulations in terms of basic operations: ramp from one voltage to another, hold a voltage at a set level, wait for a trigger and slew. With or without looping.

Whether you need one complex envelope, or several simpler modulations, Stages reconfigures itself according to which of its gate inputs are patched. There is always a role for it in your patch.

That's it. Really, there isn't more to the story.

Self-generating chiptunes? Very weird LFO shapes? Random gate delay? Stages probably does strange and wonderful things when patched in a certain way.

Flexible input/output layout:

The module detects the presence of jacks on its gate inputs to group its segments: whether it is configured as a complex 6-stage envelope, or 6 individual envelopes, or 3+3, 2+4... depends simply on how you patch it. Dummy patch cables might come handy!

When used as a multi-segment envelope, a segment activation signal is produced on all secondary outputs - for example to trigger an external event when an ADSR envelope enters its decay, sustain or release stages.

In case more than 6 segments are required, up to six modules can be chained together thanks to a connector at the back of the module.

Three segment types:

- Ramp segments go from one voltage to another, in a CV-controlled amount of time, with an adjustable curve (accelerating, uniform, decelerating). They are the building block used for the attack, decay or release segments in envelopes... or for LFOs.
- Hold segments stay at a constant (but CV-controllable) voltage for a programmable amount of time. They serve as the sustain or hold segments in envelopes.
- Step segments glide to a target (CV-controllable) voltage, then stay at this voltage for a certain amount of time until a trigger is received. They are the main ingredient for step sequences, but also for building sequential switches or a sample-and-hold.

Looping:

A segment, or a group of segments, can loop on itself: if the last segment of the envelope is included in the loop, the loop lasts forever. Otherwise, the loop remains active while the gate is high, then continues past the last segment of the loop. These two behaviours allow the creation of self-looping envelopes (LFOs), or the sustain stage of a good old ADSR envelope!

Single segment processing:

Even when they aren't part of any group and don't receive any gate or trigger signals, individual segments can perform interesting functions: Ramp can loop on itself and turn into an LFO, Hold can delay a CV and Step can slew it.

Now patch a trigger signal: the self-looping Ramp turns into a tempo-synced LFO, the Hold segment becomes a pulse generator, the Step segment a sample-and-hold.
Read more
 8 in stock $268.61
2hp
Cat: 652192 Rel: 06 Jun 17
 
Looper module for Eurorack synthesisers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
 1 in stock $116.65
Cat: 557509 Rel: 19 Dec 14
 
Clocked sequential binary event machine module
Notes: BRAINS is a clocked sequential binary event machine. It is designed to be connected to one or two Pressure Points to form a 4 or 8-Step 3-channel analog sequencer. Classic synthesis control!
Read more
 3 in stock $109.16
Cat: 584259 Rel: 15 Apr 16
 
High quality quad linear voltage controlled amplifier (VCA) synthesiser module - 8HP wide
Notes: 'Tangle Quartet' is a high quality quad linear voltage controlled amplifier (VCA) providing individual level control of 4 signal inputs with both individual outputs and a combined 'mix' output (for non patched outputs) . Control signal inputs and associated attenuation controls allow for voltage control of signal levels. Control inputs are normalised to 5v thus providing manual mix control in the absence of control signals.

Technical Specifications:

Supply: +/-12V (Reverse voltage protection)
Current Draw: ~80ma
Size: 8 HP
Depth: 32mm (including power header)
Read more
 3 in stock $172.29
Cat: 569583 Rel: 30 Jun 15
 
Dual analog VCA and 2-pole VCF, with digital control path - 12HP size
Notes: Streams provides two channels of extremely flexible signal dynamics manipulation.

Each channel consists of an analog voltage-controlled filter and amplifier (VCFA). The response curve of the amplifier section is continuously variable from exponential to linear. The amplifier gain is directly controllable from a CV input, through an attenuator. But what makes Streams truly unique is the multi-purpose EXCITE input. The signal routed to this input is analyzed by a micro-controller and translated into internal control voltages for the VCFA, turning Streams into a very versatile signal contouring tool:

Envelope generator
The EXCITE input can work as a trigger input, triggering an internal AD or AR envelope routed to the gain and the filter cutoff (in variable amount). With only 6-HP of space, you can shape an oscillator or noise source into a full-bodied sound.

Vactrol curve generator
The EXCITE input is processed by a digital model of a resistive opto-isolator (Vactrol), controlling the gain and the filter cutoff (in variable amount). The digital emulation allows the modification of properties of opto-isolators - such as response time - which are otherwise difficult to control. The virtual vactrol response can be either optimized for processing CVs, or triggers (for "plucked" sounds).

Amplitude and frequency content follower
The envelope and cutoff of the EXCITE signal is measured, and applied to the signal on the VCFA input.

Compressor/limiter
Streams' VCF is disabled, and the VCA is used to control the dynamics of the input signal. An intuitive control scheme allows the compressor to be used either for peak reduction/limiting operation; or for boosting signal levels with soft-limiting. The EXCITE input can be used as a sidechain.
Read more
 2 in stock $201.18
Cat: 669806 Rel: 20 Nov 17
 
Special Throbbing Gristle edition of the Tiptop Audio ONE module
Notes: TG ONE is a special edition of the Tiptop Audio ONE module designed to commemorate the 40th anniversary of Throbbing Gristle's ground-breaking 'Second Annual Report'. Few bands have staked out such on original space in music that proved not only immediately provocative and illuminating, but filtered into almost every corner of electronic and popular music in the succeeding decades.

Collaborating with the band and MUTE records, the Tiptop Audio team tailored the features of the popular ONE to the sound and aesthetic of Throbbing Gristle.

Decked out in a TG colour scheme of red and white on black, the design incorporates the iconic TG 'flash'. Even the packaging sports classic cover art from '20 Jazz Funk Greats'.

Working with long time beta-tester Chris Carter, the Tiptop R&D tweaked the ONE firmware creating two new modes: the first a random file selection on each trigger input; and the second, looping playback that randomly seeks in a sound file with each trigger. Both of these functions take TG ONE into new sonic territory.

TG ONE includes two exclusive cards of Throbbing Gristle samples curated by Chris Carter from his archive of the original Throbbing Gristle recording sessions. The files have been further reworked and revised, modified and mangled by Carter to give the user a unique Throbbing Gristle sonic palette to work wonders with while retaining the spirit of the original sources. Card one consists of 128 percussive sounds and audio snippets with the second card featuring 128 longer samples, pads and loops.
Tightly coupled with the firmware these cards are only available with the TG module.

Tiptop Audio would like to thank Paul Taylor, Daniel Miller and all at Mute for their support; and Chris Carter, Cosey Fanni Tutti, Genesis Breyer P-Orridge and the late Peter 'Sleazy' Christopherson for their inspiration.
Read more
 1 in stock $204.39
Cat: 598833 Rel: 25 Feb 16
 
Time shifting clock synth module with 6 simultaneously programmable and patchable clocks - 10HP wide
Notes: ***NEW revision TEMPI firmware tempi11 improves External SYNC and RUN/ STOP behaviors. Download here today - http://www.makenoisemusic.com/content/patchsheets/tempi11_firmware_update.zip***

TEMPI is a 6 Channel, polyphonic time-shifting clock module. It provides an intuitive method for creation and recall of complex clocking arrangements within a modular synthesizer system. Using HUMAN and/ or MACHINE programming you could re-create most classic Clock Divider and Multiplier arrangements and then continue on to create new ones. Store up to 64 for later recall and Select them using control signals from within your system or the Select Bus.
Read more
 4 in stock $265.40
Cat: 687873 Rel: 01 May 18
 
Unique contact microphone & amplifier, based on Tom Whitwell's open-source module - 4HP
Notes: Ears is Mutable Instruments' take on Tom Whitwell's open-source Mikrophonie module - a contact microphone and amplifier.

A large palette of organic, physical sounds can be generated by scratching, tapping, and more generally collecting any kind of acoustic waves surrounding your modular case - even speaker feedback.

With its built-in envelope follower and gate detector, it can also be the gateway between external audio sources and your modular system.

Ears for your modular:

- Built-in contact microphone soldered right under the front panel, turning the panel and your entire case into a microphone.

- Increasingly spaced ridges on the panel, generating sonically interesting pulses or impulse combs when rubbed. Strike, pick or scratch digital resonators like Rings, Elements or the 4ms SMR.

- High-quality amplification stage suitable for external contact microphones, electro-acoustic instruments like guitars, or plain line-level signals.
Read more
 5 in stock $83.47
2hp
Cat: 635861 Rel: 30 Dec 16
 
Signal splitter module
Notes: Mult is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.
Read more
 3 in stock $28.89
150/626(ページ1/13)の商品
1  2  3  ...  11  12  13  »

Filter

Synth modules
DJ機器
Release Date
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close