安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

View:
Options
150/198(ページ1/4)の商品
1  2  3  4  »
Subscribe to our weekly Studio Equipment emails
Cat: 731217 Rel: 18 Jun 19
 
Expander for Quad Operator's algorithm functionality - 4HP
Notes: Where the unexpanded Quad Operator maintains a one knob per function design discipline, we nevertheless recognized the value of some more advanced algorithm-oriented functionality.

The Algo expander for the Quad Operator provides:

- Saving and loading of modulation send knob positions for FM algorithm design reuse

- Crossfade between pairs of saved algorithms, or a saved algorithm and the live knob positions
Read more
 2 in stock $93.94
Cat: 739138 Rel: 16 Jul 19
 
Voltages expander for Permutation - silver faceplate, 6HP
Notes: Variant is an expander module based on the original Voltages expander for the Turing Machine. Variant adds two additional bipolar CV outputs (with modulation inputs) that are derived from Permutation's gate sequence.
Read more
 1 in stock $90.70
Cat: 707849 Rel: 02 Jan 19
 
Bass Drum & Filter Module with two trigger inputs 4HP
Notes: Cassa has two trigger inputs between which you can crossfade unsing the MIX potentiometer. So simple and so brilliant ... mix two different trigger sequences, blend between them, create fill-ins or connect a manual gate and fire some extra drums with your finger!
FREQ sets the drum frequency, RES controls decay time; at long decays the Cassa starts oscillating in an obscure way and starts screaming (no, it's no self- oscillation, that's schreaming!). DIST is a pretty wild distortion. Gabba musicians will love it!

Attention: module abuse!:
As the module is based on a filter which resonates when being "pinged" by a trigger signal at the audio input and then creates a percussive sound it's not far-fetched to inject audio signals instead triggers int othe Cassa. FREQ is cutoff frequency and RES the filter resonance, just as expected. But both act pretty unusual in this case for a filter. It phases more than it filters, the resonance roars and the distortion does the rest...
Instead of using two audio signals you might use one trigger and one audio signal - and the Cassa will indeed generate a drum and process the audio signal at the same time. Weird but possible. Instantly it was possible to generate a wobbly Skrillex simulation, read: saw mill dubstep aka "Filth".

Designed by Tonylight & Peppo Lasagna
Read more
 1 in stock $85.31
Cat: 707854 Rel: 02 Jan 19
 
Drum & Filter Module with powerful and quite dirty sound character
Notes: Bongo comes equipped with two trigger inputs. A potentiometer allows you to crossfade between them. The sound varies depending on the level of incoming trigger signals. With just one input patched, the knob can be used as a tone control for treble attenuation. This behavior is not surprising, as the Bongo is basically a pinged filter. Accordingly, the sound shaping parameters are called frequency and resonance. The cutoff potentiometer is slightly erratic. Small changes sometimes have a huge impact on the module's sound. The resonance leads the Bongo rather early into violent self-oscillation.

The filter is followed by a distortion circuit. It not only adds dirt to sounds, but also removes a lot of bass. Very important for creating "real" bongos. Without any distortion, the results are more reminiscent of bass drums or low toms.

The inputs can not only be fed with triggers, but audio signals as well. Patched like this, the Bongo acts as a filter. The sound qualities remain the same. Depending on the knobs' positions, the sound is rough to brutal and more or less dirty.
Read more
 1 in stock $85.31
Cat: 707858 Rel: 03 Jan 19
 
Drum & filter module with very high pitch range for rim shot 4HP
Notes: Legno is percussive instrument based around cassa design with very high pitch range for rim shot, fingers snap, high tom like sound.

Basically Cassa, Bongo and Legno are the 3 multicassa channel in eurorack format.
All the 3 module share the same design with different pitch range, cassa low range, bongo one octave higher range and legno super high range.
Read more
 1 in stock $85.31
Cat: 655869 Rel: 13 Sep 18
 
Compact, high quality, 4 in/1 out audio & CV mixer 6HP
Notes: Space conscious, 4 in/1 out, high quality audio and CV mixer. Originally set at unity gain (along with the VCA2), but tinkering provided useful intel and design changes. Upshot: With the pot set at 3:00 you are at unity, fully clockwise, expect a 2 Volt increase.

Four Pots:
LVL 1, LVL 2, LVL3, LVL 4.

Five Patch Points:
OUT, IN 1, IN 2, IN 3, IN 4.

All Controls and Patch Points:
LVL 1 - Adjusts the level of IN 1
LVL 2 - Adjusts the level of IN 2
LVL 3 - Adjusts the level of IN 3
LVL 4 - Adjusts the level of IN 4
OUT - Composite output
IN 1 - Audio/CV input 1
IN 2 - Audio/CV input 2
IN 3 - Audio/CV input 3
IN 4 - Audio/CV input 4

- Size: 6hp
- Depth: 25mm with ribbon cable attached
- Power Usage: 4mA (+12 / -12)
Read more
 1 in stock $93.95
Cat: 739466
 
B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition
Notes: ***B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition***


Ring Modulator Module

- Trigger X
- Trigger Y
- In X
- In Y
- Out
Read more
 1 in stock $73.63
Cat: 719648 Rel: 02 Sep 19
 
Master I/O module
Notes: The MASTER module is the base of every AE modular system - it contains;

- The voltage regulation (5V) for the power supply of the modules
- MIDI input (minijack; Breakout cable to DIN-5 socket is available separately)
- In/out-sockets (3.5mm minijack) for audio out and/or interfacing with a Eurorack system
- All bus signals (CV, GATE, CTRL, MIDI clock/start/stop) as patch sockets

The power supply is a 9V DC adapter; it can be connected either at the side or on the top of the module.
Read more
 2 in stock $59.38
Cat: 719652 Rel: 02 Sep 19
 
4-track, 16-step trigger sequencer
Notes: TRIQ164 is a 4-track, 16-step trigger sequencer.

Four track buttons select the track to be edited; with 16 buttons each step of the track can be activated an is then displayed by an LED.

For each step in each track a "repeat" can be activated, resulting in repeated triggers within one step. The number of repeats can be selected from one to eight by the REPEAT knob. Additionally, the repeat count can be CV controlled by the REPEAT CV input.

The inputs MUTE 1/2 allow to mute the outputs 1 and 2 by an external signal (e.g. for muting a kick drum)

Each of the 16 steps has a separate trigger output for additional control for certain steps or limiting the sequence length by connecting one of the outputs to the RESET input.

Use it for any kind of rhythmical patterns, typically for triggering drum sounds or envelope generator!

No, it has no pattern load/save features; this will be part of a future, much more complex sequencer. TRIQ164 is designed as improved replacement for the STEP10.

Width: 2U
Read more
 3 in stock $53.99
Cat: 751442 Rel: 17 Sep 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


TOPOGRAF is a drum sequencer with three tracks, that works with a "topographic" principle; it contains a number of drum patterns arranged in a "virtual map"; and with two knobs MAP X and MAP Y you can set a position in this map. With one knob per channel the density is defined; and a CHAOS knob brings some randomness into the whole process. All in all, a few knobs for a lot of drum patterns you probably wouldn't make this way by yourself - a nice source of inspiration and also great for playing live.

TOPOGRAF is the AE modular version of the Grids module by Mutable Instruments. It is 100% identical to Grids.
Read more
 1 in stock $71.65
Cat: 719650 Rel: 03 Sep 19
 
Analogue 16-step CV sequencer
Notes: The SEQ16 is a 16-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analogue sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ16 has 5 knobs for pre-setting different CV's (= notes); each of the 16 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

An additional feature is "accent"; this can be set for each step by turning the knob fully clockwise. If a step is set to "accent", a separate trigger output is set and also a gate repeat for the regular gate output can be selected (from one to eight repeats).
Read more
 2 in stock $89.62
Cat: 720431 Rel: 28 May 19
 
MIDI interface for the TRAX! sequencer - 3HP
Notes: The MIDI BUS was designed to be a MIDI interface for the Eurorack system, and more specifically to offer MIDI inputs and outputs for the TRAX performance sequencer.

This device provides opto-isolation of the MIDI input and buffers all MIDI signals.

The MIDI BUS provides MIDI IN/OUT/THRU inputs and outputs on 3.5mm TRS jacks. Three 3.5mm to 5-pin DIN MIDI cables are included with each MIDI BUS product. These MIDI cables conform to the TRS MIDI B Spec Class, currently supported by Arturia, Novation, and 1010 Music devices.

The MIDI BUS uses the power bus cable to receive and transmit MIDI at the +3.3 volt standard. In order to do this, the MIDI BUS repurposes what the Eurorack standard defines as the INT GATE line of the power bus for MIDI IN signals, and the INT CV line of the power bus for MIDI OUT signals.

To prevent conflicts with other signals that may be using these lines of the power bus, we recommend using the special MIDI BUS power cable provided with this unit, or our optional Flying Bus power cable when using the MIDI BUS with the TRAX product or any other products using this new MIDI standard.

The MIDI BUS power cable that is provided with your MIDI BUS will allow only a single device in your system to send and transmit MIDI.

The optional Flying Bus power cable allows multiple modules connected to this cable to share MIDI data with one another and also receive the proper power from the system, without connecting MIDI signals to other modules in your system.
Read more
 1 in stock $70.18
Cat: 680755 Rel: 22 May 18
 
Dual vactrol based LPG/VCA module - 2HP
Notes: The Meng Qi DPLPG is a Dual Passive 1-pole vactrol based Low Pass Gate/VCA in modest 2 HP. No power is required as the design is completely passive.

Handpicked components ensure that the modules will be musical.

Feed it a trigger and enjoy the natural smooth decay of a vactrol.
Read more
 1 in stock $69.10
Cat: 680752 Rel: 07 Jun 18
 
Collection of real time functions integrated with hand gestures & trigger input - 8HP
Notes: Hand is a gestural controller based on a piezo mic build in the elevated front panel.

When you tap the front panel, the audio is converted into CV and allows you to control a collection of real time functions including an LFO or envelope, a clock source and a trigger delay. It's possible to switch between LFO and envelope mode when holding the Rec button for 4 seconds.

Slew smoothes the slopes and the Rec button allows you to record the gestures for 2.22 seconds max.
Read more
 2 in stock $85.31
Cat: 746964 Rel: 17 Sep 19
 
Synth module featuring two separate voltage processors
Notes: The upper voltage processor features four inputs which are mixed and inverted at the output. Inputs 2 and 4 have their own attenuator. Input 2 is normalised to a positive fixed voltage source, which may be attenuated, and appears inverted at the output, useful for applying negative offsets.

The lower voltage processor features two inputs which are mixed and inverted at the output. Input 2 has its own attenuator. Input 2 is normalised to a negative fixed voltage, which may be attenuated, and appears inverted at the output, useful for applying positive offsets.
Read more
 1 in stock $89.63
Cat: 744065 Rel: 17 Sep 19
 
4 input audio & CV mixer
Notes: Volts Platz has 4 inputs with attenuators. Input 3 is normalled to +ve for positive offsets (up to +8V), input 4 is normalled to -ve for negative offsets (down to -8V).

The first opamp stage now includes a switch to select x1, x2 or x10 amplification. You can take a direct (inverted) output from this stage.

The second opamp features switchable clipping diodes (LEDs) which clip anything above/below +/-5V. So 'normal' Euro signals go through unaffected. Flick the amplification switch and things gets dirty.

Patch a post-VCF signal into input 1. You can then use a combination of offsets at inputs 3 and 4, and CV into input 2 to explore modulated symmetric and asymmetric clipping.

Scale, offset, amplify, clip. Or just use it as a 4 input mixer.
Read more
 1 in stock $89.62
Cat: 690758 Rel: 27 Feb 19
 
VCA module with dedicated controls for Volume, Drive & CV input attenuation
Notes: The DTA is a low-cost, yet high quality VCA made by Manhattan Analog. The circuit was designed as a back end for monophonic synthesiser voices. If clean sound doesn't feel right in a particular moment, you can add a decent amount of dirt using the module's drive stage.

The DTA features a signal input, followed by a VCA. The circuit's volume can be adjusted manually and via CV inputs. One of the control voltage channels comes equipped with an attenuator. Thanks to an adjustable drive stage, the sound character can be varied from clean to crisp and dirty.
Read more
 1 in stock $91.78
Cat: 614138 Rel: 16 Jun 16
 
Eurorack envelope synth module based on Roland System 100M envelope - 4HP wide
Notes: The second module in the Roland System 100M clone series, the System X Envelope on 4HP. Includes the addition of a range switch for fast/slow response. Even snappier than a crocodile sandwich.

For audio demo, please visit - http://www.frequencycentral.co.uk/wp-content/uploads/2012/11/MoroderClarke.mp3
Read more
$107.98 SAVE 10%
 6 in stock $97.18
Cat: 588622 Rel: 09 Nov 15
 
Quad trigger to solenoid motor driver synthesiser module - 5HP wide
Notes: SOLENOID can drive 4 solenoid motors with voltage directly from the power supply. Motor driving circuitry and CV input circuitry are optically isolated without any ground connection. Requires external power supply for driving motors.

Output pulse width a knob optimizes the trigger signals to be sufficient to deliver adequate signal for the solenoids. With shorter pulses, solenoids don't move in their full range, or move with less power. This can also be used for adjusting the dynamics.
Read more
 1 in stock $96.11
Cat: 659944 Rel: 27 Sep 17
 
Expander module for Radar - 8HP
Notes: BLIP is an expander for RADAR adding a whole host of new features, such as; envelope inversion, ignore triggers, envelope sequencing, envelope delay, envelope roll, level, shape and attack, decay or both swapping, equal/opposite swapping, 8 preset locations, CV recall, and a full suite of random functions!

The BLIP expander provides an extreme variety of extra controls and outputs, making the Radar more powerful than it already is.
Read more
 1 in stock $96.11
MFB
Cat: 695604 Rel: 16 Sep 19
 
MFB-522/Tanzbar style analogue bass drum module
Notes: The Bass-522 module is based on the 522 circuit and offers a punchy attack, long decay and wider pitch range. Adjustable noise and pitch envelope have also been added.

The sound can be triggered by Gate, M-Bus and signals like piezo pickups, dynamic mics and drum pads. The Sense parameter decides the sensibility and dynamic of attack, amplitude. decay and pitch.

The following parameters are available and can be controlled by CV:

TONE dampens the attack transient.
DECAY sets the release time of the amplitude.
TUNE defines the basic pitch from around 35 to 70 Hz.
PITCH controls the amount of pitch envelope.
NOISE mixes the noise floor (no CV control).

The module offers the new developed M-Bus connector which means you can you control everything via MIDI/CV interface or the new MFB SEQ-01 Pro Drum Sequencer without additional patching. The following addresses are supported:

Trigger with Velocity - MIDI Note #35 or #36 (switchable) and controller values for Tone, Decay, Tube, Pitch and Noise Decay.

The module has a width of 8HP (40mm).
Read more
 4 in stock $85.31
MFB
Cat: 695615 Rel: 16 Sep 19
 
Classic envelope generator - 8HP
Notes: The ADSR module is a voltage-controlled envelope generator. Normally, the characteristic is logarithmic, but a linear part can be added. With the help of the loop button, the envelope can also be used as an LFO, then Attack and Decay determine the frequency that goes far beyond 100 Hz. Another special feature is the CV inputs for Attack, Decay and Release. This can be used e.g. control or modulate the times externally. In addition to the normal output, there is an inverted output in parallel.

The power consumption is +/- 30 mA. The module has a width of 8 HP (40 mm).
Read more
 1 in stock $80.99
MFB
Cat: 695618 Rel: 16 Sep 19
 
Analogue VCA with built-in oscilloscope
Notes: The Visual VCA is a voltage controlled, analogue amplifier module with additional waveform display. The signal amplification can be regulated via the two CV inputs. CV1 is usually controlled by the envelope. A special feature is CV2, because this input can only be used in conjunction with CV1 and is normally used for modulation effects. The integrated oscilloscope represents the waveform of the input signal and has a resolution of 128 x 64 pixels. With the interval controller you can set the sampling frequency.

The power consumption is +/- 30 mA. The module has a width of 8 HP (40 mm).
Read more
 2 in stock $89.63
MFB
Cat: 695619 Rel: 16 Sep 19
 
Analogue 24db lowpass filter - 8HP
Notes: The 24dB VCF SSI is a voltage controlled analogue low pass filter module with the new SSI2144 chip. In addition, it has a 12dB output that works either as a low pass or bandpass (+/- 12dB). There are two inputs, one with attenuator. Another CV input with attenuator is available for the cut-off frequency. The resonance is controlled either via a controller or via another CV input with attenuator.

The power consumption is +/- 30 mA. The module has a width of 8 HP (40 mm).
Read more
 2 in stock $73.42
MFB
Cat: 695610 Rel: 16 Sep 19
 
Stereo drum mixer - 12HP
Notes: The DRUM-99 module is an audio-mixer that has been designed for the modules of the MFB-DRUM series but also for usage with other manufacturer's modules. When using multiple drum-modules in a modular system, the following processing stages like filters or VCAs often lack enough audio inputs. To route a complete drum-set through a filter, a separate mixer like the DRUM-99 comes handy.

DRUM-99 offers five monaural inputs with individual level control. Tiny trim-controls are used to set the channel panorama position for the internal stereo-bus.

A fixed level stereo-input can accommodate the signal of one or more additional DRUM-99 modules. These inputs can also be used with the DRUM-06 module (Tom Tom) that also offers a stereo-output.

All five mono signals and the stereo-input are routed to the stereo-output that can be connected to two VCAs, filters or other sound manipulating devices. The output may also be used to connect the DRUM-99 to a mixing-console or audio-interface.

The stereo-output is designed for a possible summing with additional stereo-outputs.

The module has a width of 12 HP (60mm).
Read more
 1 in stock $74.51
MFB
Cat: 695617 Rel: 16 Sep 19
 
Analogue VCO, switchable to DCO
Notes: The VCO/DCO is a voltage controlled analogue oscillator module. This can also be used as a DCO, eliminating the need for heating and temperature sensitivity. All functions except for the FM input are also available with the DCO. Sawtooth, triangle, rectangle and pulse are available as waveforms, with soft switching between the individual waveforms. This can also be done with a control voltage, so you have additional PWM modulation.

The power consumption is +/- 30 mA. The module has a width of 8 HP (40 mm).
Read more
 1 in stock $98.27
MFB VC LFO Module (synth module)
MFB
Cat: 695621 Rel: 16 Sep 19
 
Voltage controlled LFO, switchable to oneshot mode
Notes: The module VC LFO accommodates a slowly oscillating oscillator, which is primarily used for modulations. It has five waveforms, CV input with attenuator and a control range from 10 seconds to 100 Hz. In addition, the LFO has its own reset input, over which the waveform is restarted. If you set the speed accordingly and have a separate reset pulse, you can synchronize the LFO with a sequencer. The following waveforms are available: rising sawtooth, triangle, falling sawtooth, rectangle and sample & hold.

The output voltages are maximum +/- 5 volts. The module has a width of 8 HP (40mm).
Read more
 4 in stock $73.43
MFB
Cat: 695607 Rel: 16 Sep 19
 
Clap module based on circuit designs of the MFB-522 & Tanzbar Lite
Notes: The Clap-522 Modul contains an enhanced circuit of the MFB-522 and Tanzbar Lite. You can edit and modulate the sound in a wide range.

As modular concept you have the possibility to control the parameter PUSE, SNAP, ATTACK, DECAY and FILTER via CV-signals from Envelopes, LFOs and Step Sequencers.

The parameters are in detail:

PULSE is the amount of claps between 1 and 7.
ATTACK sets the noise level between the clap repetitions.
DECAY controls the release of the noisy reverb.
FILTER defines the colour of the noise floor.
WIDE edits the gap between the single claps.

Beside sequencer generated analogue and digital trigger-signals, drum pads, piezo pickups and dynamic mics may also be used. Here the SENS controls allow individual adjustment of the input sensitivity. Dynamic trigger also changes the volume of the clap.

The module provides the new developed M-Bus connection. MIDI signals can control following destinations:

Trigger MIDI Note #39 or #82, switchable, with Velocity. Controller values for Wide, Attack, Decay and Filter.

The module has a width of 8 HP (40mm).
Read more
 1 in stock $93.95
Cat: 673008 Rel: 13 Dec 17
 
Compact three channel utility module for every patch - 6HP
Notes: The 321 includes the most useful functions we always need in every patch, to edit and combine dynamically the signals in use.

It is composed of three identical sections, the red, yellow and green, where each of those is capable of scaling any signal, from 0 up to 2 times (+6dB), flip its phase, and apply a DC offset, allowing to shift your audio or CV up or down.

In case no signals are connected to the section input, the offset may act as a CV source too.

The three sections are then summed together into two independent summing stages: the top right jack outputs the sum of all three sections, while the top left outputs the sum of the unconnected sections only (semi-normalled).

The 321 is entirely DC coupled, allowing the process of control voltages as well as audio signals.

In case CV's or audio signals are particularly hot, the two 6dB attenuators, one per each summing section might be helpful to reduce exactly by 50% the incoming signals.
Read more
 2 in stock $90.70
Cat: 673007 Rel: 22 Dec 17
 
Mixer/buffered signal distributor module - 6HP
Notes: The 333 is a summing and distribution module for Eurorack modular systems.

It is composed of three identical sections, the red, yellow and green, each of those featuring three inputs summing amplifier with three independently buffered outputs.

Derived directly from the CGM creative mixer series, the sum section is DC coupled, allowing the sum of control voltages as well as audio signals.

With an extremely low tolerance in both sum and output sections, it is suitable also for summing quantized voltages like the ones coming out from the quantized outputs of the SAPEL.

In case CVs or audio signals are particularly hot, the 6dB attenuator might be helpful to reduce exactly by 50% the incoming signals.

Red and yellow output are also normalled to the 1st jack socket of the yellow and green input: in this way this module can also work as a 1 to 9 buffered multiple.
Read more
 4 in stock $91.78
Cat: 634773 Rel: 15 Dec 16
 
9 input/9 output pin matrix synth module - 24HP wide
Notes: The MTX9 presents a new take on an old classic - the pin matrix, famously incorporated into EMS and Maplin synthesizer designs. The MTX9 provides 9 inputs and 9 outputs to be patched to one another, whilst allowing for passive splitting of one input to several outputs and averaging summation of several inputs to one output (or more).

Each component of the matrix has been designed to use standard parts - the pins are 2mm banana test plugs and all cards of the matrix are easily replaceable. Whilst the matrix is currently passive, an active expander card will be available from FSS soon. The MTX9 is supplied with a dry-wipe marker and 10 banana pins as standard, with spares available from FSS.
Read more
 4 in stock $96.11
Cat: 614853 Rel: 06 Jun 16
 
4 channel mixer eurorack synth module - 4HP wide
Notes: The MX1 mixer module from FSS is designed to present a compact, affordable mixing solution for Eurorack users. The MX1 gives four audio inputs in as many HP, with both normal and phase-inverted outputs available.

The level controls of the MX1 are logarithmic, but the channels are DC coupled, so CVs can be summed together using the MX1 if necessary.

The MX1 provides unity gain of each channel when the level control is fully clockwise, meaning that there is no loss of signal level when mixing. This also allows for the MX1 to be overdriven, especially if the same source is multipled to the four inputs or the "normal" output is fed back into one of the inputs.

A set of expansion headers also allow for the FSS P.O.C.A. VAC1 and Whitehall SW1 modules to be used alongside the MX1 without any patching required, when using the MX1x expander accessory.
Read more
 3 in stock $68.02
Cat: 620648 Rel: 11 Aug 16
 
Envelope, oscillator & noise source synth module in Eurorack format - 2HP wide
Notes: EON is an envelope, oscillator, and noise source in 2 HP.

It has three modes that are quickly and easily set via a 3 position switch.

Its functionality is deep and multifaceted. The EON can be a full fledged envelope with linear and exponential shapes, a square wave oscillator that tracks 1 volt per octave, or a digital noise source with downsample control.

In addition to the three main functions, the EON also has a triangle wave LFO, random gates, and cycling envelopes.

Packing more features per HP than any other module before, the EON is the best way to fill any empty spot in your case.
Read more
 1 in stock $96.11
Cat: 616113 Rel: 07 Jul 16
 
Buffered mult synth module with 2 sets of 3 outputs - 2HP wide
Notes: The 2HP Performance Buffered Mult features 2 sets of 3 outputs as well as a SWITCH for disconnecting the 2nd input to make a total of 6 outputs. It's the perfect mult solution for live performance!
Read more
 2 in stock $69.10
Cat: 637403 Rel: 05 Jun 17
 
6HP Eurorack stereo headphone amp/line out module with stereo 1/4" headphone amplifier output & dual-mono 1/4" line-level outputs
Notes: The best way to get sound out of a modular. Outs is a dual independent output module featuring a stereo 1/4" headphone amplifier output and dual mono 1/4" line level outputs.

Left and Right inputs are available. If only the left input is used, it is sent to both the Left and Right outputs.
Read more
MRP:$123.11 SAVE 22%
 1 in stock $96.11
Cat: 638093 Rel: 06 Feb 17
 
DIN/SYNC expander module in Eurorack format - 4HP wide
Notes: DIN SYNC is a 4 output expander module with selectable divide (1,2,4) for use with Malekko SYNC. Connects to SYNC via 6-pin cable (included).
Read more
 1 in stock $74.51
Koma Elektronik Field Kit Expansion Pack (expansion/accessory pack)
Cat: 663392 Rel: 26 Oct 17
 
Expansion pack for the Koma Elektronik Electro Acoustic Workstation
Notes: It's all about the things you connect to the The Field Kit! To get you started, Koma Elektronik have decided to offer an Expansion Pack with a bunch of different sources that you can use and connect to create your own signature sounds.

The Expansion Pack contains:

- 2 x Contact Microphones: Use these contact microphones to pick up vibration or sound, they are an amazing versatile input source
- 1 x Electro-Magnetic Pickup: This guy is good at picking up changes in magnetic fields, you can use it to amplify a string like a guitar pickup or amplify a spinning motor
- 1 x Solenoid push-pull motor: Use the solenoid to hit things, together with the DC Interface the solenoid can make anything rhythmical and percussive
- 1 x DC motor: The Motor can be used to rotate things or as a noisy oscillator together with the Electro-Magnetic Pickup
- 1 x small speaker: Use the speaker to listen to the main mix or as a sound source and to feedback sounds
- 3 x patch cables Always handy to have around to patch up different parts of your Field Kit... and a bunch of little objects to play with (little springs, marbles)

The new KOMA Elektronik Field Kit is the perfect tool for everyone who would like to experiment with electro acoustic sound. Use everyday objects, amplify them and use them to make sound, like our heroes John Cage and David Tudor used to do!

The Field Kit is optimized to process signals from microphones, contact microphones, electromagnetic pickups and able to run DC motors and solenoids. On top of that it can receive radio signals and convert signals from switches and sensors into control voltage!
Read more
 1 in stock $61.54
Cat: 637039 Rel: 22 Mar 17
 
Dedicated switch module for Minimod, VCF/VCA gain jumper settings, plus 6-way multiple - dark edition
Notes: AJH Synth have had quite a few customers asking if we can make the gain jumpers on the MiniMod VCF and VCA modules accessible from the front panel, so this 2HP module aims to address this.

The Gain Switch Multi has two switches which connect to the gain jumpers on the VCA and VCF. Switch "up" is the same as having the gain jumper in place, switch "down" is the same as removing the jumper, and gives higher gain.

Using these switches gives a similar effect to the old "headphone out to external input" trick on the original Model D but with a much wider overdrive range, particularly from the VCA.

As an added bonus, AJH Synth have also included a six way passive multi.
Read more
 1 in stock $74.50
Cat: 588813 Rel: 02 Oct 15
 
Passive quad attenuator synthesiser module - 4HP wide
Notes: QUAD ATTEN is a passive quad attenuator in a small 4hp profile.

Although quite basic, attenuators are extremely powerful in a modular system.

They are especially useful for adjusting the depth of control voltages going into modules that lack CV attenuators.

Power Draw: +0mA, -0mA (Passive). 6HP width. 25mm Depth.
Read more
 5 in stock $66.94
Cat: 580271 Rel: 03 Aug 15
 
Invert offset synth module for modifying control voltages for other modules
Notes: The 6 HP Invert Offset module creates an easy way to modify control voltages for other modules in your system.

The Invert Offset consists of two identical channels. Signal applied to the In jack is vertically offset by the knob, additionally a CV signal may be applied to offset the signal vertically.

The +Out jack puts out a non-inverted signal with the specified offset. The -Out jack puts out an inverted signal with the same offset as the +Out.

The Offset CV input allows you to mix two signals together, Offset will never be inverted, while the signal at the In jack will be inverted based on the selected output.

There is also a sum output (1+2) that takes the non-inverted outputs and adds them together. Also there is a comparator gate output that is on if the channel 1 output is more positive than channel 2.
Read more
 1 in stock $89.62
Cat: 732852 Rel: 27 Sep 19
 
Ring modulator with internal oscillator
Notes: Erica Pico Ring is a balanced modulator (quadrant multiplier) circuit to create bell-like, metallic or robotic sounds. It has built-in sine-wave modulation oscillator for more versatility.
Read more
 1 in stock $98.26
Cat: 739111
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Erica Pico RND is combined LFO/random source module.

It generates sine LFO waves, white noise, S&H CV and some interesting stuff - random triggers and pulse wave with random duty circle; basically, everything, you need, to bring some uncertainty in your modular setup.

The Pico RND comes equipped with five outputs, they emit the following signals:

- Sine waves
- Pulse waves with varying width
- Random triggers
- Sample and hold material
- White noise

The speed of LFO and S&H circuit can be edited using the module's potentiometer (Range: 0.1 Hz to 20 Hz). For synchronizing the Pico RND with other gear, a clock input was implemented.
Read more
 1 in stock $77.89
Cat: 742136 Rel: 10 Sep 19
 
Buffered precision multiple - 4HP
Notes: Erica Synths Black Multi is highly accurate active buffered 2x1to3 or 1to6 multiple that will work for signal splitting in any circuit, including driving several VCOs in tune from one CV source. "Octave" or +/- 1V offset switches on both channels allow to add or subtract one volt form each channel thus transposing VCOs one octave up or down. Hidden feature - custom offset - allows to set user defined offset on the first channel.
Read more
 3 in stock $79.90
Cat: 738520 Rel: 22 Jul 19
 
3 channel mixer - 3HP
Notes: Pico Mixer is simple 3 channel DC coupled mixer intended to mix AUDIO SIGNALS AND CV SIGNALS in order to obtain complex modulations. Also it may serve as CV AND AUDIO attenuator.
Read more
 1 in stock $61.54
Cat: 732847 Rel: 22 Jul 19
 
LFO + highly stable S&H in one module
Notes: Erica Pico LFO/S&H is a full analogue modulations source - LFO and Sample and Hold - to provide some controlled randomness to your modular setup.
Read more
 4 in stock $90.71
Cat: 712715 Rel: 10 Dec 18
 
5 x attenuator for bridging Eurorack & desktop mixers - 6HP
Notes: LINK is the module that bridges Eurorack to destop mixers - it has 5 sections that attenuate Eurorack signals to line level signals and sends them to 6.3mm jacks for quality connection to the mixer.
Read more
 1 in stock $58.30
Cat: 686655 Rel: 27 Apr 18
 
Random generator & LFO with independent outs - 3HP
Notes: Erica Pico RND is combined LFO/random source module.

It generates sine LFO waves, white noise, S&H CV and some interesting stuff - random triggers and pulse wave with random duty circle; basically, everything, you need, to bring some uncertainty in your modular setup.

The Pico RND comes equipped with five outputs, they emit the following signals:

- Sine waves
- Pulse waves with varying width
- Random triggers
- Sample and hold material
- White noise

The speed of LFO and S&H circuit can be edited using the module's potentiometer (Range: 0.1 Hz to 20 Hz). For synchronizing the Pico RND with other gear, a clock input was implemented.
Read more
 3 in stock $91.78
Cat: 686673 Rel: 30 Apr 18
 
Output module with headphone amplifier - 3HP
Notes: Erica Pico Output module is just what you need to monitor your music on headphones and have standardized connection to mixing desks.

3.5mm stereo output jack allows you to connect the Pico System directly to virtually any speaker system or line input. Even in your car.
Read more
 3 in stock $99.34
Cat: 686642 Rel: 30 Apr 18
 
Classic 24dB/oct lowpass VCF - 3HP
Notes: Erica Pico VCF3, despite its small size, is mighty, classical sounding 24dB/oct lowpass filter that makes Pico System sound like ten times larger setups.
Read more
 1 in stock $90.70
Cat: 686648 Rel: 30 Apr 18
 
Signal manipulation module - 3HP
Notes: Erica Pico SCALE module allows you to manipulate audio or CV signals - attenuate, boost, invert and offset - in order to achieve interesting modulation effects.
Read more
 1 in stock $53.26
150/198(ページ1/4)の商品
1  2  3  4  »

Filter

Synth modules
DJ機器
Release Date
Close