安全なお買い物

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

安全なお買い物

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth modules

ホーム  Equipment  

Synth modules

Options
150/201(ページ1/5)の商品
1  2  3  4  5  »
Subscribe to our weekly Studio Equipment emails
2hp ADSR Module (black faceplate)
2hp
Cat: 686006 Rel: 04 May 18
 
Four stage linear envelope module with two expressive ranges
Notes: ADSR is a four stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.
Read more
MRP:$112.30 SAVE 15%
! low stock $95.73
Click for better price!
or call +44 20 7424 1960
quote 686006
2hp ADSR Module (silver faceplate)
2hp
Cat: 638779 Rel: 21 Feb 17
 
Four stage linear envelope module with two expressive ranges
Notes: ADSR is a four stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.
Read more
MRP:$112.30 SAVE 16%
 1 in stock $93.89
Click for better price!
or call +44 20 7424 1960
quote 638779
2hp Clk Wide Range Voltage Controlled Clock Generator Module (silver faceplate)
2hp
Cat: 638780 Rel: 21 Feb 17
 
Voltage controlled clock generator
Notes: Clk is a voltage controlled clock generator with all the features a master clock needs. It has an extremely wide range from ten seconds between pulses well into audio rate. In addition, the pause button and CV input provide an expressive feature that is all too often missing in a modular setup. Stop using LFOs or other modulation sources for your master clock, and let Clk do what it's best at.
Read more
MRP:$99.39 SAVE 23%
 2 in stock $76.38
2hp EG Envelope Generator Module (black faceplate)
2hp
Cat: 686015 Rel: 04 May 18
 
Full featured two stage envelope generator module
Notes: EG is a full featured two-stage envelope generator. In addition to a colossal range from 3ms to 11 minutes per stage, EG features the ability to switch between linear and exponential curves on the fly, a built-in attenuator, and CV over attack and decay. Boasting more features than modules five times its size, EG can fill any envelope-sized gap in your system.
Read more
MRP:$112.30 SAVE 18%
 1 in stock $92.02
Click for better price!
or call +44 20 7424 1960
quote 686015
2hp EG Envelope Generator Module (silver faceplate)
2hp
Cat: 638778 Rel: 21 Feb 17
 
Full featured two stage envelope generator module
Notes: EG is a full featured two-stage envelope generator. In addition to a colossal range from 3ms to 11 minutes per stage, EG features the ability to switch between linear and exponential curves on the fly, a built-in attenuator, and CV over attack and decay. Boasting more features than modules five times its size, EG can fill any envelope-sized gap in your system.
Read more
MRP:$112.30 SAVE 29%
 1 in stock $79.60
2hp LPF Four Pole Voltage Controlled Low Pass Filter Module (silver faceplate)
2hp
Cat: 649107 Rel: 11 May 17
 
Analog, voltage controlled low pass filter
Notes: LPF is a four-pole, voltage controlled low-pass filter. Its 24 dB per octave slope and OTA topology provide a smooth, buttery character. Resonance can be pushed to self oscillation, turning it into a sine wave VCO with accurate 1V/oct tracking across four octaves.

In addition, CV over resonance gives dynamic sound shaping possibilities under voltage control. Hit the slope with LPF.
Read more
MRP:$117.46 SAVE 19%
 1 in stock $94.65
Click for better price!
or call +44 20 7424 1960
quote 649107
2hp Mix 4 Channel Mixer Module (black faceplate)
2hp
Cat: 686027 Rel: 04 May 18
 
4 channel mixer module
Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.
Read more
MRP:$117.46 SAVE 17%
 2 in stock $97.88
Click for better price!
or call +44 20 7424 1960
quote 686027
2hp Mix 4 Channel Mixer Module (silver faceplate)
2hp
Cat: 635860 Rel: 30 Dec 16
 
4 channel mixer module
Notes: Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.
Read more
MRP:$117.46 SAVE 18%
 2 in stock $95.73
Click for better price!
or call +44 20 7424 1960
quote 635860
2hp Rnd v2 Random Voltage Generator Module (black faceplate)
2hp
Cat: 686034 Rel: 08 May 18
 
Random voltage generator & gate source
Notes: Rnd is a random voltage generator and random gate source with an internal clock.

The quantized and smooth outputs are completely independent, and each feature an attenuator to fine tune the output voltage between 0V and 10V. This allows for a musically useful range to be defined. When externally clocked, random gates erupt from the gate output.

Great for modulation and chaotic rhythmic events, Rnd is a universal solution for adding unpredictability to your system.
Read more
MRP:$117.46 SAVE 17%
 1 in stock $97.88
Click for better price!
or call +44 20 7424 1960
quote 686034
2hp Rnd v2 Random Voltage Generator Module (silver faceplate)
2hp
Cat: 680015 Rel: 12 Mar 18
 
Random voltage generator & gate source
Notes: Rnd is a random voltage generator and random gate source with an internal clock.

The quantized and smooth outputs are completely independent, and each feature an attenuator to fine tune the output voltage between 0V and 10V. This allows for a musically useful range to be defined. When externally clocked, random gates erupt from the gate output.

Great for modulation and chaotic rhythmic events, Rnd is a universal solution for adding unpredictability to your system.
Read more
MRP:$117.46 SAVE 17%
 1 in stock $97.88
Click for better price!
or call +44 20 7424 1960
quote 680015
2hp S+H Dual Sample & Hold Module (black faceplate)
2hp
Cat: 686039 Rel: 08 May 18
 
Analog sample & hold module with two independent channels
Notes: Great for generating random voltages from white noise, arpeggios from sawtooth waves, and downsampling audio signals.
Read more
MRP:$99.39 SAVE 17%
 1 in stock $82.83
Click for better price!
or call +44 20 7424 1960
quote 686039
2hp TM Turing Machine Module (black faceplate)
2hp
Cat: 686040 Rel: 04 May 18
 
Random sequence generator module
Notes: TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user's probability settings. By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you're looking for a controlled random source, or an evolving melody generator, TM has you covered.
Read more
MRP:$117.46 SAVE 16%
 2 in stock $98.97
Click for better price!
or call +44 20 7424 1960
quote 686040
2hp TM Turing Machine Module (silver faceplate)
2hp
Cat: 638776 Rel: 21 Feb 17
 
Random sequence generator module
Notes: TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user's probability settings. By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you're looking for a controlled random source, or an evolving melody generator, TM has you covered.
Read more
MRP:$117.46 SAVE 17%
 2 in stock $97.34
Click for better price!
or call +44 20 7424 1960
quote 638776
2hp Tune Multi Scale Pitch Quantizer Module (silver faceplate)
2hp
Cat: 635864 Rel: 30 Dec 16
 
Multi-scale pitch quantizer
Notes: Tune is a multi-scale pitch quantizer. It features 11 scales ranging from chromatic to octatonic with everything in between. In addition, the bias control allows the user to transpose the melody to a different octave or starting note.

This functionality opens up every musical mode for each of its 11 scales and provides a performable control for transforming melodies on the fly.
Read more
MRP:$117.46 SAVE 24%
 1 in stock $89.28
2hp Unity Dual Mixer Module (silver faceplate)
2hp
Cat: 662177 Rel: 11 Sep 17
 
Dual unity mixer with two sets of three inputs - 2HP
Notes: Unity is a dual unity mixer with two sets of three inputs. Its versatile normalling behaviour allows it to function as a six-to-one mixer, or two three-to-one mixers. Three modes of operation provide ideal behaviour for audio, control voltage, or both.

Averaging Mode allows the user to mix audio signals without losing their relative loudness. Unity Mode is great for mixing control signals in situations where you want to add vibrato to a sequence, or create a chaotic modulation source out of LFOs and envelopes. Split Mode sets each channel to a different mode, allowing for mixing CV on one channel and audio on the other. Unite your system with Unity.
Read more
MRP:$112.30 SAVE 29%
 1 in stock $79.60
2hp VCA Dual Voltage Controlled Amplifier Module (black faceplate)
2hp
Cat: 686046 Rel: 04 May 18
 
Dual linear VCA module with CV input attenuator & DC-coupled inputs
Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.
Read more
MRP:$112.30 SAVE 13%
 1 in stock $97.46
Click for better price!
or call +44 20 7424 1960
quote 686046
2hp VCA Dual Voltage Controlled Amplifier Module (silver faceplate)
2hp
Cat: 638773 Rel: 21 Feb 17
 
Dual linear VCA module with CV input attenuator & DC-coupled inputs
Notes: The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.
Read more
MRP:$112.30 SAVE 20%
 2 in stock $90.36
Click for better price!
or call +44 20 7424 1960
quote 638773
4ms Buff Mult Buffered Multiple Module
Cat: 589492 Rel: 09 Dec 15
 
Buffered multiple synthesiser module with LED indicators - 3HP wide
Notes: The Buff Mult is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.
Read more
MRP:$92.94 SAVE 21%
 3 in stock $73.15
Click for better price!
or call +44 20 7424 1960
quote 589492
4ms Listen Up Passive Expander Module For Listen Modules
Cat: 752435 Rel: 25 Oct 19
 
Small passive expander for the Listen Four & Listen IO modules - 4HP
Notes: The Listen Up is a small passive expander for the Listen modules that provides stereo 1/4" (6.35mm) jack inputs and outputs. It connects to one or two Listen modules and/or WAV Recorder module with the included 3-pin cables. There are four 1/4" jacks arranged in left/right pairs. The left jack of each pair can be used as a TRS stereo jack if the right jack is unpatched.
Read more
MRP:$76.16 SAVE 11%
 1 in stock $67.75
Click for better price!
or call +44 20 7424 1960
quote 752435
4ms Rotating Clock Divider Breakout Module
Cat: 589499 Rel: 09 Dec 15
 
Breakout synthesiser module for Rotating Clock Divider module - 4HP wide
Notes: The RCD Breakout adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power.
Read more
MRP:$112.30 SAVE 19%
 2 in stock $91.43
Click for better price!
or call +44 20 7424 1960
quote 589499
4ms Row Power 25 Power Solution For Eurorack Systems (white)
Cat: 752437 Rel: 25 Oct 19
 
25W Eurorack power supply
Notes: The Row Power 25 is a clean, regulated, and protected power supply module for Eurorack systems. It requires a barrel-style power brick (15V - 20V DC) and supplies power to modules via flying bus cables, direct connection, and/or bus boards.

The Row Power 25 provides 25W of power for any Eurorack modules (typically 4-10 modules*):

+12V @ 1.4A maximum, 1.0A recommended
-12V @ 0.8A maximum, 0.5A recommended
+5V @ 1.0A maximum, 0.8A recommended

*number of modules can vary depending on each module's power consumption.

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 25 can also be daisy-chained to Pods. Each Row Power and Pod will be independently regulated and protected for ultra-low cross-talk between rows.
Read more
MRP:$117.46 SAVE 19%
 2 in stock $94.65
Click for better price!
or call +44 20 7424 1960
quote 752437
ACL Multi II Buffered & Unbuffered Multiple Module
Cat: 673535 Rel: 22 Dec 17
 
Multiple module consisting of an active & passive signal distributor
Notes: The ACL Multi II is a Multiple module providing both non-buffered and buffered outputs. The non-buffered section has one input and six outputs, freely interchangeable and the buffered section consists of one inverting and one non-inverting high-impedance input and five low-impedance outputs. Due to the use of precision low-tolerance resistors and low-noise/low DC-drift/Offset Operational Amplifiers, the module reliably delivers minimal error copies of the incoming signals. The inverting and non-inverting buffered inputs can also function as a mixer, giving at the outputs the difference between the respective signals fed to them.
Read more
 1 in stock $97.88
Click for better price!
or call +44 20 7424 1960
quote 673535
ADDAC System ADDAC200S Size Matter Module (red faceplate)
Cat: 776135 Rel: 08 Sep 20
 
Adapter module
Notes: ADDAC System's 1/4 to 1/8 inch adapter allow you to connect one 1/4 inch jacks to an 1/8 inch one right in from your rack- now you can leave all those cable adapters behind.

Mechanical:
- Format: Eurorack
- Width: 4 HP
- Depth: 3.5 cm

Electrical:
- Passive
Read more
 1 in stock $58.73
Click for better price!
or call +44 20 7424 1960
quote 776135
ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate)
Cat: 776261 Rel: 08 Sep 20
 
Gate to trigger module
Notes: Following ADDAC System's T-Networks series, the importance of having the right input signal for firing drum modules or envelopes was realised. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led to the simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V
Read more
 1 in stock $91.00
Click for better price!
or call +44 20 7424 1960
quote 776261
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Cat: 776281 Rel: 08 Sep 20
 
Floor control module
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

Specs:
- Width: 4 HP
- Depth: 4 cm
- Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
 1 in stock $78.52
Click for better price!
or call +44 20 7424 1960
quote 776281
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Cat: 776289 Rel: 08 Sep 20
 
Dual epression pedal attentuator
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
- Passive Module
- Width: 4 HP
- Depth: 3 cm
Read more
MRP:$72.28
 1 in stock $72.07
Click for better price!
or call +44 20 7424 1960
quote 776289
ADDAC System ADDAC807A+ Individual Channel Stereo Outputs Module (black faceplate)
Cat: 776667 Rel: 08 Sep 20
 
Stereo outputs module
Notes: Dedicated expansion for the ADDAC807 VC Summing Mixer

Features 5 individual track post fader stereo outputs.

6HP
2 cm deep
0mA
Read more
 1 in stock $89.27
Click for better price!
or call +44 20 7424 1960
quote 776667
ADDAC System ADDAC807C+ Individual Channel Stereo Outputs Module (black faceplate)
Cat: 776670 Rel: 08 Sep 20
 
Summing mixer module
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA
Read more
MRP:$67.12
 1 in stock $66.68
Click for better price!
or call +44 20 7424 1960
quote 776670
AION Modular 995 Attenuators Module
Cat: 780130 Rel: 07 Jul 20
 
Attenuator module
Notes: The 995 Attenuator panel consists of three "passive circuits", each made of a 25k potentiometer between input and output. The signal input to the top attenuator is chained to the bottom two in series. Introduction of a plug into middle or bottom input breaks the normalling system: 1 to 1-2-3, 1-2 to 2-3, 1-2-3 to 1-2-3.
Read more
MRP:$114.88 SAVE 19%
 1 in stock $92.50
Click for better price!
or call +44 20 7424 1960
quote 780130
AJH Synth Gain Switch Multi Module (black)
Cat: 637039 Rel: 22 Mar 17
 
Dedicated switch module for Minimod, VCF/VCA gain jumper settings, plus 6-way multiple - dark edition
Notes: AJH Synth have had quite a few customers asking if we can make the gain jumpers on the MiniMod VCF and VCA modules accessible from the front panel, so this 2HP module aims to address this.

The Gain Switch Multi has two switches which connect to the gain jumpers on the VCA and VCF. Switch "up" is the same as having the gain jumper in place, switch "down" is the same as removing the jumper, and gives higher gain.

Using these switches gives a similar effect to the old "headphone out to external input" trick on the original Model D but with a much wider overdrive range, particularly from the VCA.

As an added bonus, AJH Synth have also included a six way passive multi.
Read more
MRP:$90.36 SAVE 12%
 1 in stock $79.16
Click for better price!
or call +44 20 7424 1960
quote 637039
ALM Headphone Output Module
Cat: 688779 Rel: 11 Jul 18
 
Stereo headphone driver output - 2HP
Notes: The 'HPO' is an affordable super slim and skiff friendly no frills stereo headphone driver output for your modular synthesiser. Includes a volume control and ability to double up a mono signal into stereo. A great use for that left over 2hp in a skiff or larger system.

Give loved ones, friends and acquaintances a break from your musical 'genius', the HPO offers a solitary cell for focused creativity impregnable from undeserving non-believers.
Read more
 4 in stock $58.09
Click for better price!
or call +44 20 7424 1960
quote 688779
ALM mmT Trigger Expander Module For mmMidi
Cat: 757948 Rel: 09 Dec 19
 
Expander for the mmMIDI, adding 8 additional gate outputs
Notes: The 'mmT' is an optional 3HP expander which connects directly to the mmMidi. It maps a third MIDI channel's key presses to 8 trigger/gate outputs as shown on the mmT front panel.
Read more
 4 in stock $84.97
Click for better price!
or call +44 20 7424 1960
quote 757948
ALM O/A/x2 Dual Channel Offset & Attenuverter Module
Cat: 584260 Rel: 15 Apr 16
 
Dual channel attenuverter synthesiser module - 4HP wide
Notes: 'O/A/x2' is a dual channel attenuverter with each channel also including a bipolar voltage offset and LED monitoring. The module is primarily intended for fine grain flexible 'editing' of control signals (i.e changing the phase, level and DC offset of an LFO signal) but also has uses with audio signals such as attenuation, inversion and mixing.

Technical Specifications:

Supply: +/-12V (Reverse voltage protection)
Current Draw: ~50ma
Size: 4 HP
Depth: 32mm (including power header)
Read more
 8 in stock $86.06
Click for better price!
or call +44 20 7424 1960
quote 584260
ALM PE1 Dual Band Parametric EQ Module
Cat: 628651 Rel: 17 Oct 16
 
Dual band parametric EQ & simple two channel mixer
Notes: Two control sections provide a sweepable cut or boost to a selectable upper and lower frequency band. The module has two ac-coupled audio inputs, one of which has an attenuation control for basic mixing, and a single audio output.

The 'PE-1' is inspired by the EQ circuits used in early 'Portastudio' type 4 track tape mixers. Warm up a digital source, fine control a live performance, extend a mixer, tweak a feedback loop - there are many uses for this great sounding EQ.

Features:
- Provides +/-12db of boost and cut across 2 selected frequency bands
- Dual input with single attenuation control
- Reverse polarity protection.
- Skiff friendly
- Designed and made in the UK
Read more
 2 in stock $86.06
Click for better price!
or call +44 20 7424 1960
quote 628651
ALM PEXP2 Pamela's New Workout Expander Module
Cat: 648932 Rel: 25 May 17
 
Expander module for Pamela's New Workout - 2HP
Notes: Pexp-2 is an expander module for Pamela's NEW Workout offering additional dedicated fixed clocked outputs.

Extend Pam as a master to clock external gear with a super solid MIDI & Din Sync dedicated clock outputs.

Use extra fixed jack clocked gate outputs to free up Pamela outputs for more exotic modulation duties.

Connects to, and powered by, expander header on rear of Pamela's NEW Workout. Only a single expander is supported at any time.
Read more
 2 in stock $74.22
Click for better price!
or call +44 20 7424 1960
quote 648932
ALM SBG Guitar Effects Adapter Module
Cat: 584253 Rel: 15 Apr 16
 
Compact utility synthesiser module for interfacing guitar effects with eurorack modular system - 4HP wide
Notes: The 'S.B.G' is a compact utility module intended for the interfacing of guitar effect pedals with your eurorack modular system.

It provides both attenuation and amplification of audio signals for level matching together with a crossfade control to conveniently adjust the wet/dry mix of a processed signal. The module also offers regulation of outgoing CV signals for safer use of pedal expression inputs.

Technical Specifications:

Supply: +/-12V (Reverse voltage protection)
Current Draw: ~30ma
Size: 4 HP
Depth: 22mm (including power header)
Read more
 5 in stock $94.65
Click for better price!
or call +44 20 7424 1960
quote 584253
FORTHCOMING
AniModule Line_Amp Unity Gain Buffered Multiple Module
Cat: 793793 Rel: 31 Dec 20
MRP:$107.14 SAVE 17%
coming soon $89.27
Behringer 911A Dual Trigger Delay Module
Cat: 773000 Rel: 19 Jun 20
 
dual trigger delay module
Notes: Enter the Behringer 911A DUAL TRIGGER DELAY. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 911A comes with two delay triggers with their own delay time controls ranging from 2 ms up to 10 seconds and their own 3.5 mm S-Trig ins and outs. Connect the 911A to the Behringer 911 ENVELOPE GENERATOR module and turn your Attack/Decay/Sustain/Release (ADSR) module into a Delay/Attack/Decay/Sustain/Release (DADSR) module. Rather than just playing the note when the signal is triggered, the 911A creates a nice volume swell effect, rising from 0 until the peak volume then going through the rest of the phases set in the envelope generator.

The delays in the 911A can be coupled in three different ways. In the Off setting, the delays are triggered separately via the trigger inputs. In Parallel mode, the trigger connected to the input at the top section will activate both delays at the same time. Switching the knob to Series will trigger the top section first then the lower section after.

Installing the 911A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 911A to be mixed with other synth modules for a truly unique set up.
Read more
 6 in stock $53.77
Click for better price!
or call +44 20 7424 1960
quote 773000
Behringer 921A Oscillator Driver Module
Cat: 772998 Rel: 19 Jun 20
 
oscillator driver module
Notes: Enter the Behringer 921A OSCILLATOR DRIVER. An authentic reproduction of the circuitry from the Modular 55 and 35 series oscillator drivers used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921A OSCILLATOR DRIVER module features a frequency knob that can adjust between either octave or semitone frequencies. The included rocker switch can be used to select between the two frequency types. The width of the rectangular wave is adjusted via a control knob that goes from 10% up to 90%. You can also connect any incoming control voltage or modulation signal into either of the 3.5 mm Frequency or Width inputs.

The 921A not only controls just one 921B Oscillator, but 12 of them- providing you with more flexibility and more nuanced waveforms.

Installing the 921A is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921A to be mixed with other synth modules for a truly unique set up.
Read more
 1 in stock $83.89
Click for better price!
or call +44 20 7424 1960
quote 772998
Blue Lantern Modules Active Buffered Multiple Module
Cat: 775752 Rel: 13 May 20
 
multiple module
Notes: This is an active multiple using the TL074 op amp to copy the signal and repeat the patch, using a simple design. What goes in, comes out exactly the same, and no resistors have been used to play with the ratios. A 100k to ground clamp has also been added so that you can copy even fast clocks, gates, etc and they will not 'stick' together to make one big pulse, which can be a problem with some multiples.

You can have two long 8 repeated outs and one four repeated out, or patch all five inputs to have five sets of four repeated outs.

5 mA +12V
5 mA -12V
Read more
MRP:$101.97 SAVE 23%
 4 in stock $78.52
Click for better price!
or call +44 20 7424 1960
quote 775752
Blue Lantern Modules CMOS Party Logic Module
Cat: 775755 Rel: 13 May 20
 
Logic module
Notes: The CMOS Party Logic, by Blue Lantern, is a readily patchable boolean logic module just waiting for a square wave or clock signal into its corresponding A and B inputs in order to generate a variety of output signals. The module's AND, NAND, NOR, XOR, and OR outputs ensure a variety of potential combinations.

Additionally, the CMOS Party Logic features extremely low latency and is capable of operating at audio rate.
Read more
MRP:$101.97 SAVE 23%
 6 in stock $78.52
Click for better price!
or call +44 20 7424 1960
quote 775755
Blue Lantern Modules Harmonic Generator Module
Cat: 773975 Rel: 13 May 20
 
Sub-harmonic generator module
Notes: This is a VCO add on or helper. You patch a saw, square, triangle , or sine wave into the input jack. Now patch the output jack to a mixer module. For example you can use the Blue Lantern modules: Sir Mix Alot, Mix Em Up, or other third party mixers. You also patch one of the original waves from your vco (this is optional as you will still get audio results).

What you will hear with your gear is one supper fat mixture of harmonics. You have 4 knobs to mix in each harmonic.

The module can handle a full wide frequency spectrum.

The module is using CD4013 Flip Flop IC to do its 4 divider break down- there is no latency, no Atmega or STM issues
Read more
MRP:$83.90 SAVE 17%
 2 in stock $69.92
Click for better price!
or call +44 20 7424 1960
quote 773975
Blue Lantern Modules Looping Simple ADSR Version 2.1 Module
Cat: 773976 Rel: 13 May 20
 
ADSR module
Notes: A Simple Envelope Generator that produces an Attack, Decay, Sustain, and Release voltage output. This product only produces voltage. You will need an external VCA module for you to complete the common Envelope + Amplifier Patch. This module can also be used to modulate for example a vco. This is a digital product. There is positive CV control for the output,amplitude level of the envelope.
Read more
MRP:$109.72 SAVE 17%
 1 in stock $91.43
Click for better price!
or call +44 20 7424 1960
quote 773976
Blue Lantern Modules Simple VCLFO Module
Cat: 775771 Rel: 13 May 20
 
LFO module
Notes: This is another analog lfo made specifically for those who may be on a really tight budget- this particular module is good for modulating your filter module or VCO module.
Read more
MRP:$109.72 SAVE 21%
 1 in stock $87.13
Click for better price!
or call +44 20 7424 1960
quote 775771
Doepfer A-102 Diode Low Pass Filter Module
Cat: 692503 Rel: 18 Jun 18
 
Reproduction of the legendary British diode lowpass filter - 8HP
Notes: Module A-102 is a reproduction of the legendary low pass filter design that uses diodes in the filter stage as frequency controlling elements - resulting in "strange" resonance behaviour and frequency response, as resonance and frequency are not independent from another.

As for the rest, the A-102 is identical to the A-120 Moog low pass filter, the A-103 (18dB TB303 Filter) i.e. the same controls, inputs and outputs. Only the filter sound is different:

- Manual control of filter frequency
- 3 CV inputs (CV1, CV2, CV3), 2 of them with attenuator (CV2, CV3)
- Input level control
- Resonance control up to self-oscillation (depends upon the frequency setting for the A-102)
Read more
 1 in stock $86.04
Click for better price!
or call +44 20 7424 1960
quote 692503
Doepfer A-103 18dB Low Pass Filter Module
Cat: 692504 Rel: 18 Jun 18
 
18dB low pass filter based on a modified Moog cascade - 8HP
Notes: Module A-103 is a voltage controlled low pass filter with 18dB/octave slope. The circuit is based on a modified transistor ladder (Moog ladder) and is a reproduction of the legendary TB303 filter.

As for the rest the A-103 is identical to the A-120 Moog low pass filter (same controls, inputs/outputs) only the filter sound is different.
Read more
MRP:$100.68 SAVE 16%
 1 in stock $84.97
Click for better price!
or call +44 20 7424 1960
quote 692504
Doepfer A-106-5 12dB SEM Filter Module
Cat: 577753 Rel: 06 Jun 19
 
12dB multi-mode filter - 8HP
Notes: Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.

The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.

The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

The module generates a distorted audio signal if the level control is set to about 50% (i.e. centre position) or more with A-100 standard signals like VCOs.
Read more
 9 in stock $82.59
Click for better price!
or call +44 20 7424 1960
quote 577753
Doepfer A-106-5 12dB SEM Filter Module (special edition cream version)
Cat: 671592 Rel: 29 Nov 17
 
12dB multi-mode filter based on classic SEM filter circuitry
Notes: Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module. The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates. The module does not feature self oscillation in contrast to most of the other filters of the A-100 system. The module generates a distorted audio signal if the level control is set to about 50% (i.e. centre position) or more with A-100 standard signals like VCOs.

Inputs: Audio In, CV1 In without attenuator, CV2 In with Polarizer
Outputs: Bandpass Out, Low/Highpass Mix-Out
Controls: Audio Attenuator, CV2 Polarizer, Frequency, Resonance, LP/HP Mix

The function and operation of this module is very similar to the Wasp filter module A-124. But the sound of both filters is very different! We will publish no separate user's manual for the A-106-5 but a combined manual for both A-106-5 and A-124. The only functional difference is the position of the sockets and controls, and the function of the controls CV2 (A-124: normal attenuator, A-106-5: polarizer)

Width: 8HP / 40.3mm
Depth: 55mm (Measured from the rear side of the front panel)
Current: +12V: +30mA, -12V: -20mA
Read more
 1 in stock $89.27
Click for better price!
or call +44 20 7424 1960
quote 671592
Doepfer A-114v Dual Ring Modulator Module (Vintage Edition)
Cat: 698544 Rel: 15 Aug 18
 
Two identical ring modulators in one module - 4HP
Notes: Module A-114 contains two separate ring modulators. A ring modulator outputs the product (Multiplication X - Y) of the signals at inputs X and Y. It's similar to a VCA, but whereas a VCA only responds to positive voltages at the inputs (2-quadrant multiplication), the ring modulator responds to both positive and negative voltages (4-quadrant multiplication).

The ring modulator thus provides a refinement of amplitude modulation (AM). Ordinary amplitude modulation will output the original carrier frequency fC as well as the two side bands (fC - fM, fC + fM) for each of the spectral components of the carrier and modulation signals - but ring modulation cancels out the carrier frequencies, and just lets the side-bands pass to the output (see Fig. 1).

A ring modulator is used for the production of bell-like sounds, alien voices, or just to produce new timbres.
Read more
 1 in stock $93.57
Click for better price!
or call +44 20 7424 1960
quote 698544
FORTHCOMING
Doepfer A-118-2V Noise & Random Slim Line Vintage Edition Module
Cat: 790467 Rel: 31 Dec 20
 
Signal generator module
Notes: Module A-118-2 generates the signals white noise, colored noise, continuous random voltage and stepped random voltage.

The noise signal is generated 100% analog by amplification of the noise of a transistor. White and colored noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red and Blue noise (low/high frequency component) in the colored noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal is sampled at the rising edge of the Clock signal. For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. Dual color LEDs are used to indicates the continuous and stepped random voltages.

Controls:
Blue: share of the high frequencies in the the colored noise output
Red: share of the low frequencies in the the colored noise output
Rate: rate of change of the continuous random voltage
Level: amplitude of the continuous random voltage
TH/SH: switches between T&H und S&H

Inputs and outputs:
RND: continuous random voltage output (with LED display)
TH/SH: stepped random voltage output (with LED display)
Clk: Clock input of the S&H/T&H unit
C Noise: colored noise output
W Noise: white noise output

Important notes:
After power on it takes a few minutes until the two noise signals and the random signals are generated. The module is not faulty when after power on the signals do not appear immediately!

The S&H/T&H function is realized by pure analog circuitry (electronic switch followed by a holding capacitor and buffer). Consequently the output voltage drifts a bit in the holding state because the capacitor is discharged by parasitic resistors. The drift depends also upon environmental conditions like humidity or temperature.

The level of the random voltage changes with the settings of the Blue and Red controls. Especially the Red control affects the random voltage level (which is derived by low pass filtering from the colored noise signal) because the Red control changes the share of the low frequencies in the colored noise signal. The effect of the Blue control is much smaller because it changes the share of the high frequencies in the colored noise signal which are filtered out by the low pass of the random circuitry.

Power consumption: 20mA at +12V and 20mA at -12V
Depth: 40mm
HP : 4
Read more
MRP:$103.26 SAVE 17%
coming soon $86.04
150/201(ページ1/5)の商品
1  2  3  4  5  »

Filter

Synth modules
DJ機器
Release Date
Close